API tools faq
paste
Advertisement
Guest User

2.6.35.13 without SMP, with patch for udev

a guest
Jun 4th, 2015
324
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.67 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.35.13-cavm1.whitney-econa (root@debian-compile) (gcc version 4.9.2 ( 4.9.2-10) ) #35 Mon Jun 1 02:37:57 CEST 2015
  4. [ 0.000000] Whitney release v1.1-beta5
  5. [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5387d
  6. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  7. [ 0.000000] Machine: Cavium Networks CNS3420 Validation Board
  8. [ 0.000000] Ignoring unrecognised tag 0x00000000
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  10. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  11. [ 0.000000] Kernel command line: root=/dev/sda1 mem=256M console=ttyS0,38400
  12. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  13. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  14. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  15. [ 0.000000] allocated 1310720 bytes of page_cgroup
  16. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  17. [ 0.000000] Memory: 256MB = 256MB total
  18. [ 0.000000] Memory: 249700k/249700k available, 12444k reserved, 0K highmem
  19. [ 0.000000] Virtual kernel memory layout:
  20. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  21. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  22. [ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
  23. [ 0.000000] vmalloc : 0xb0800000 - 0xe0000000 ( 760 MB)
  24. [ 0.000000] lowmem : 0xa0000000 - 0xb0000000 ( 256 MB)
  25. [ 0.000000] modules : 0x9f000000 - 0xa0000000 ( 16 MB)
  26. [ 0.000000] .init : 0xa0008000 - 0xa02b9000 (2756 kB)
  27. [ 0.000000] .text : 0xa02b9000 - 0xa081c000 (5516 kB)
  28. [ 0.000000] .data : 0xa083e000 - 0xa0874240 ( 217 kB)
  29. [ 0.000000] Hierarchical RCU implementation.
  30. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  31. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  32. [ 0.000000] NR_IRQS:160
  33. [ 0.000000] Console: colour dummy device 80x30
  34. [ 0.000000] console [ttyS0] enabled
  35. [ 0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
  36. [ 0.260000] pid_max: default: 32768 minimum: 301
  37. [ 0.270000] Mount-cache hash table entries: 512
  38. [ 0.280000] Initializing cgroup subsys ns
  39. [ 0.290000] Initializing cgroup subsys cpuacct
  40. [ 0.300000] Initializing cgroup subsys memory
  41. [ 0.310000] Initializing cgroup subsys devices
  42. [ 0.320000] Initializing cgroup subsys freezer
  43. [ 0.330000] Initializing cgroup subsys net_cls
  44. [ 0.340000] Initializing cgroup subsys blkio
  45. [ 0.350000] CPU: Testing write buffer coherency:
  46. [ 0.360000] ok
  47. [ 0.360000] devtmpfs: initialized
  48. [ 0.370000] ------------[ cut here ]------------
  49. [ 0.380000] WARNING: at arch/arm/mm/dma-mapping.c:165 consistent_init+0x3c/0xc0()
  50. [ 0.390000] Modules linked in:
  51. [ 0.400000] [<a02bf43c>] (unwind_backtrace+0x0/0xdc) from [<a02d3e14>] (warn_slowpath_common+0x4c/0x64)
  52. [ 0.410000] [<a02d3e14>] (warn_slowpath_common+0x4c/0x64) from [<a02d3ebc>] (warn_slowpath_null+0x18/0x20)
  53. [ 0.420000] [<a02d3ebc>] (warn_slowpath_null+0x18/0x20) from [<a000c3d8>] (consistent_init+0x3c/0xc0)
  54. [ 0.430000] [<a000c3d8>] (consistent_init+0x3c/0xc0) from [<a02b9324>] (do_one_initcall+0x54/0x188)
  55. [ 0.440000] [<a02b9324>] (do_one_initcall+0x54/0x188) from [<a00089d0>] (kernel_init+0xb4/0x160)
  56. [ 0.450000] [<a00089d0>] (kernel_init+0xb4/0x160) from [<a02bac24>] (kernel_thread_exit+0x0/0x8)
  57. [ 0.460000] ---[ end trace 1b75b31a2719ed1c ]---
  58. [ 0.470000] NET: Registered protocol family 16
  59. [ 0.480000] L310 cache controller enabled
  60. [ 0.490000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x02540000, Cache size: 262144 B
  61. [ 0.500000] Initializing CNS3XXX DMA controller
  62. [ 0.510000] First time microcode alloc for channel 0 done @phy:2f055000
  63. [ 0.520000] First time microcode alloc for channel 1 done @phy:2f056000
  64. [ 0.530000] First time microcode alloc for channel 2 done @phy:2f057000
  65. [ 0.540000] First time microcode alloc for channel 3 done @phy:2f058000
  66. [ 0.550000] First time microcode alloc for channel 4 done @phy:2f059000
  67. [ 0.560000] First time microcode alloc for channel 5 done @phy:2f05a000
  68. [ 0.570000] First time microcode alloc for channel 6 done @phy:2f05b000
  69. [ 0.580000] First time microcode alloc for channel 7 done @phy:2f07a000
  70. [ 0.590000] First time microcode alloc for channel 8 done @phy:2f07b000
  71. [ 0.600000] cns_rdma_init: start
  72. [ 0.610000] cns_rdma_init: reg1: virt=0xaf015328
  73. [ 0.620000] cns_rdma_init: pre-allocating rdma_sg: 32*280=8960
  74. [ 0.630000] cns_rdma_init: q1: virt=0xaf012a00, phy=0x2f012a00 -> 0x2f012bf0
  75. [ 0.640000] cns_rdma_init: done, err=0
  76. [ 0.660000] Cavium feature enabled:
  77. [ 0.680000] bio: create slab <bio-0> at 0
  78. [ 0.700000] vgaarb: loaded
  79. [ 0.700000] SCSI subsystem initialized
  80. [ 0.710000] usbcore: registered new interface driver usbfs
  81. [ 0.720000] usbcore: registered new interface driver hub
  82. [ 0.730000] usbcore: registered new device driver usb
  83. [ 0.910000] raid6: int32x1 72 MB/s
  84. [ 1.090000] raid6: int32x2 90 MB/s
  85. [ 1.270000] raid6: int32x4 78 MB/s
  86. [ 1.450000] raid6: int32x8 69 MB/s
  87. [ 1.630000] raid6: CNS-RAID 401 MB/s
  88. [ 1.640000] raid6: using algorithm CNS-RAID (401 MB/s)
  89. [ 1.650000] Switching to clocksource timer1
  90. [ 1.660000] Slow work thread pool: Starting up
  91. [ 1.670000] Slow work thread pool: Ready
  92. [ 1.680000] FS-Cache: Loaded
  93. [ 1.700000] NET: Registered protocol family 2
  94. [ 1.710000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  95. [ 1.720000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  96. [ 1.730000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  97. [ 1.740000] TCP: Hash tables configured (established 8192 bind 8192)
  98. [ 1.750000] TCP reno registered
  99. [ 1.760000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  100. [ 1.780000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  101. [ 1.790000] NET: Registered protocol family 1
  102. [ 1.800000] RPC: Registered udp transport module.
  103. [ 1.810000] RPC: Registered tcp transport module.
  104. [ 1.820000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. [ 2.140000] CNS3XXX PCIe Host Control Driver
  106. [ 2.150000] ===============================
  107. [ 2.160000] CNS3XXX PCIe support both internal and external clock.
  108. [ 2.170000] However, incorrect selection may result in system hang.
  109. [ 2.180000] If booting hangs, please select choose
  110. [ 2.190000] CONFIG_CNS3XXX_INTERNAL_CLOCK_SOURCE
  111. [ 2.200000] instead.
  112. [ 2.200000] ===============================
  113. [ 2.210000] PCI-E0 uses external clock source.
  114. [ 2.220000] PCIe: Port[0] Enable PCIe LTSSM
  115. [ 2.230000] PCIe: Port[0] Check data link layer...
  116. [ 2.240000] Link up.
  117. [ 2.250000] PCIe: Set Bridge Max_Payload_Size to 128 byte
  118. [ 2.260000] PCIe: Set Bridge Max_Read_Request_Size to 128 byte
  119. [ 2.270000] PCIe: Set Device Max_Payload_Size to 128 byte
  120. [ 2.280000] PCIe: Set Device Max_Read_Request_Size to 128 byte
  121. [ 2.290000] PCI: bus0: Fast back to back transfers disabled
  122. [ 2.300000] PCI: bus1: Fast back to back transfers disabled
  123. [ 2.310000] PCIe0: Bridge found.
  124. [ 2.320000] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
  125. [ 2.330000] PCIe0 map irq: 0000:00:00.00 slot 0, pin 1, irq: 87
  126. [ 2.340000] PCIe0 map irq: 0000:01:00.00 slot 0, pin 1, irq: 61
  127. [ 2.350000] pci 0000:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
  128. [ 2.360000] pci 0000:01:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit]
  129. [ 2.370000] pci 0000:01:00.0: BAR 0: set to [mem 0xa0000000-0xa0007fff 64bit] (PCI address [0xa0000000-0xa0007fff]
  130. [ 2.380000] VFS: Disk quotas dquot_6.5.2
  131. [ 2.390000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  132. [ 2.400000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  133. [ 2.410000] Installing knfsd (copyright (C) 1996 [email protected]).
  134. [ 2.420000] NTFS driver 2.1.29 [Flags: R/W].
  135. [ 2.430000] fuse init (API version 7.14)
  136. [ 2.440000] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  137. [ 2.450000] SGI XFS Quota Management subsystem
  138. [ 2.460000] GFS2 (built Jun 1 2015 02:34:55) installed
  139. [ 2.470000] msgmni has been set to 487
  140. [ 2.480000] alg: No test for stdrng (krng)
  141. [ 2.490000] io scheduler noop registered
  142. [ 2.500000] io scheduler deadline registered (default)
  143. [ 2.520000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  144. [ 2.530000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45) is a 16550A
  145. [ 2.540000] brd: module loaded
  146. [ 2.560000] loop: module loaded
  147. [ 2.570000] drbd: initialized. Version: 8.3.8 (api:88/proto:86-94)
  148. [ 2.580000] drbd: built-in
  149. [ 2.580000] drbd: registered as block device major 147
  150. [ 2.590000] drbd: minor_table @ 0xaf6fd6a0
  151. [ 2.600000] Loading iSCSI transport class v2.0-870.
  152. [ 2.610000] iscsi: registered transport (tcp)
  153. [ 2.620000] cns3xxx_spi_probe: setup CNS3XXX SPI Controller in polling mode, w/o DMA
  154. [ 2.640000] SPI bit rate = 116/64 Mhz
  155. [ 2.650000] m25p80 spi1.0: found mx25l4005a, expected m25p80
  156. [ 2.670000] m25p80 spi1.0: mx25l4005a (512 Kbytes)
  157. [ 2.680000] Creating 3 MTD partitions on "spi1.0":
  158. [ 2.690000] 0x000000000000-0x000000030000 : "SPI-UBoot"
  159. [ 2.700000] 0x000000030000-0x000000040000 : "SPI-UBootEnv"
  160. [ 2.710000] 0x000000040000-0x000000080000 : "SPI-FileSystem"
  161. [ 2.720000] CNS3XXX AHCI SATA low-level driver
  162. [ 2.730000] SATA Port0 Spread-spectrum : Disable
  163. [ 2.740000] SATA Port0 Spread-spectrum : Enable
  164. [ 2.750000] SATA Port1 Spread-spectrum : Disable
  165. [ 2.760000] SATA Port1 Spread-spectrum : Enable
  166. [ 2.790000] cns3xxx-ahci cns3xxx-ahci.0: forcing PORTS_IMPL to 0x3
  167. [ 2.800000] CPU clock : 700
  168. [ 2.800000] *** Timer 1ms: 100000(0x186a0) ***
  169. [ 2.810000] *** Set to: 350000(0x55730) ***
  170. [ 2.820000] cns3xxx-ahci cns3xxx-ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  171. [ 2.830000] cns3xxx-ahci cns3xxx-ahci.0: flags: ncq sntf pm led clo only pmp pio slum part
  172. [ 2.840000] scsi0 : cns3xxx-ahci
  173. [ 2.850000] scsi1 : cns3xxx-ahci
  174. [ 2.860000] ata1: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000100 irq 65
  175. [ 2.870000] ata2: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000180 irq 65
  176. [ 2.890000] tun: Universal TUN/TAP device driver, 1.6
  177. [ 2.900000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  178. [ 2.920000] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  179. [ 2.930000] xhci_hcd 0000:01:00.0: xHCI Host Controller
  180. [ 2.940000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  181. [ 3.010000] xhci_hcd 0000:01:00.0: irq 61, io mem 0xa0000000
  182. [ 3.020000] hub 1-0:1.0: USB hub found
  183. [ 3.030000] hub 1-0:1.0: 4 ports detected
  184. [ 3.040000] Initializing USB Mass Storage driver...
  185. [ 3.050000] usbcore: registered new interface driver usb-storage
  186. [ 3.060000] USB Mass Storage support registered.
  187. [ 3.070000] mice: PS/2 mouse device common for all mice
  188. [ 3.080000] CNS3XXX Real Time Clock, (c) 2009 Cavium Networks
  189. [ 3.090000] rtc irq:23
  190. [ 3.100000] cns3xxx-rtc cns3xxx-rtc: rtc core: registered cns3xxx-rtc as rtc0
  191. [ 3.110000] i2c /dev entries driver
  192. [ 3.130000] adt7475 0-002e: ADT7473 device, revision 0
  193. [ 3.140000] adt7475 0-002e: Optional features: fan4 pwm2
  194. [ 3.150000] CNS3XXX Watchdog Timer, noboot=0 margin=60 sec (nowayout= 0)
  195. [ 3.160000] watchdog: cns3xxx_wdt_probe
  196. [ 3.170000] watchdog irq = 30
  197. [ 3.180000] watchdog start_regs = 0xB082C600
  198. [ 3.250000] Watchdog timer frequency : 349.98MHz.
  199. [ 3.260000] ata1: SATA link down (SStatus 0 SControl 300)
  200. [ 3.270000] ata2: SATA link down (SStatus 0 SControl 300)
  201. [ 3.280000] md: linear personality registered for level -1
  202. [ 3.290000] md: raid0 personality registered for level 0
  203. [ 3.300000] md: raid1 personality registered for level 1
  204. [ 3.310000] xor: measuring software checksum speed
  205. [ 3.370000] arm4regs : 981.600 MB/sec
  206. [ 3.430000] 8regs : 453.200 MB/sec
  207. [ 3.490000] 32regs : 494.000 MB/sec
  208. [ 3.550000] CNS-RAID : 116.800 MB/sec
  209. [ 3.560000] xor: using function: CNS-RAID (116.800 MB/sec)
  210. [ 3.570000] md: raid6 personality registered for level 6
  211. [ 3.580000] md: raid5 personality registered for level 5
  212. [ 3.590000] md: raid4 personality registered for level 4
  213. [ 3.600000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
  214. [ 3.610000] sdhci: Secure Digital Host Controller Interface driver
  215. [ 3.620000] sdhci: Copyright(c) Pierre Ossman
  216. [ 3.630000] sdhci-cns3xxx, (c) 2009 Cavium Networks
  217. [ 3.640000] mmc0: SDHCI controller on cns3xxx [sdhci-cns3xxx.0] using PIO
  218. [ 3.660000] n1_ssl_config_device: symbol_get failed
  219. [ 3.670000] Cavium device is not initialized1
  220. [ 3.680000] TCP cubic registered
  221. [ 3.690000] NET: Registered protocol family 17
  222. [ 3.700000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4
  223. [ 3.720000] cns3xxx-rtc cns3xxx-rtc: setting system clock to 2015-06-01 00:41:01 UTC (1433119261)
  224. [ 3.760000] mmc0: new high speed SD card at address 0007
  225. [ 3.770000] mmcblk0: mmc0:0007 SD256 246 MiB
  226. [ 3.780000] mmcblk0:
  227. [ 3.790000] xhci_hcd 0000:01:00.0: Can't reset device (slot ID 1) in enabled/disabled state
  228. [ 3.800000] xhci_hcd 0000:01:00.0: Not freeing device rings.
  229. [ 3.810000] usb 1-3: new high speed USB device using xhci_hcd and address 0
  230. [ 3.820000] p1 p2 p3 p4
  231. [ 3.850000] scsi2 : usb-storage 1-3:1.0
  232. [ 4.860000] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
  233. [ 4.870000] sd 2:0:0:0: Attached scsi generic sg0 type 0
  234. [ 4.880000] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
  235. [ 4.890000] sd 2:0:0:0: [sda] Write Protect is off
  236. [ 4.900000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  237. [ 4.910000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  238. [ 4.920000] sda:
  239. [ 4.930000] sda1
  240. [ 4.940000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  241. [ 4.950000] sd 2:0:0:0: [sda] Attached SCSI removable disk
  242. [ 16.360000] Warning: unable to open an initial console.
  243. [ 16.430000] <30>udevd[498]: starting version 175
  244. INIT: version 2.88 booting
  245. [info] Using makefile-style concurrent boot in runlevel S.
  246. [....] Starting the hotplug events dispatcher: udevd[ 18.410000] <30>systemd-udevd[680]: starting version 215
  247. . ok
  248. [ ok ] Synthesizing the initial hotplug events...done.
  249. [ ok ] Waiting for /dev to be fully populated...done.
  250. [ ok ] Activating swap...done.
  251. [....] Checking root file system...fsck from util-linux 2.25.2
  252. /run/rootdev: clean, 12171/488640 files, 147094/1953792 blocks
  253. done.
  254. [ ok ] Activating lvm and md swap...done.
  255. [....] Checking file systems...fsck from util-linux 2.25.2
  256. done.
  257. [ ok ] Loading kernel modules...done.
  258. [ ok ] Cleaning up temporary files... /tmp.
  259. [ ok ] Mounting local filesystems...done.
  260. [ ok ] Activating swapfile swap...done.
  261. [ ok ] Cleaning up temporary files....
  262. [ ok ] Setting kernel variables ...done.
  263. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
  264. Copyright 2004-2014 Internet Systems Consortium.
  265. All rights reserved.
  266. For info, please visit https://www.isc.org/software/dhcp/
  267.  
  268. Cannot find device "eth0"
  269. Bind socket to interface: No such device
  270.  
  271. If you think you have received this message due to a bug rather
  272. than a configuration issue please read the section on submitting
  273. bugs on either our web page at www.isc.org or in the README file
  274. before submitting a bug. These pages explain the proper
  275. process and the information we find helpful for debugging..
  276.  
  277. exiting.
  278. Failed to bring up eth0.
  279. done.
  280. rpcbind: cannot create socket for udp6
  281. rpcbind: cannot create socket for tcp6
  282. [ ok ] Starting rpcbind daemon....
  283. [ ok ] Starting NFS common utilities: statd idmapd.
  284. [ ok ] Cleaning up temporary files....
  285. INIT: Entering runlevel: 2
  286. [info] Using makefile-style concurrent boot in runlevel 2.
  287. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
  288. 1577 (syslogd)
  289. . ok
  290. [ ok ] Starting NFS common utilities: statd idmapd.
  291. [ ok ] Starting system message bus: dbus.
  292. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
  293. [warn] Not starting NFS kernel daemon: no exports. ... (warning).
  294. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
  295. 1580 (klogd)
  296. . ok
  297. [ ok ] Starting NTP server: ntpd.
  298. [ ok ] Starting OpenBSD Secure Shell server: sshd.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!