Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- milord@ilya:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffb0000 (usable)
- [ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffc0000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000dffc0000 - 00000000dfff0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xdffb0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000120000000 aka 4608M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 377a4000 - 37fef403
- [ 0.000000] Allocated new RAMDISK: 00100000 - 0094b403
- [ 0.000000] Move RAMDISK from 00000000377a4000 - 0000000037fef402 to 00100000 - 0094b402
- [ 0.000000] ACPI: RSDP 000fa4f0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT dffb0000 00040 (v01 A_M_I OEMRSDT 03001109 MSFT 00000097)
- [ 0.000000] ACPI: FACP dffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
- [ 0.000000] ACPI: DSDT dffb0460 0494B (v01 AS360 AS360122 00000122 INTL 20051117)
- [ 0.000000] ACPI: FACS dffc0000 00040
- [ 0.000000] ACPI: APIC dffb0390 00090 (v01 A_M_I OEMAPIC 03001109 MSFT 00000097)
- [ 0.000000] ACPI: MCFG dffb0420 0003C (v01 A_M_I OEMMCFG 03001109 MSFT 00000097)
- [ 0.000000] ACPI: OEMB dffc0040 00061 (v01 A_M_I AMI_OEM 03001109 MSFT 00000097)
- [ 0.000000] ACPI: SRAT dffb4db0 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
- [ 0.000000] ACPI: AAFT dffb4ea0 00027 (v01 A_M_I OEMAAFT 03001109 MSFT 00000097)
- [ 0.000000] ACPI: SSDT dffb4ed0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2699MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 0 - 373fe000
- [ 0.000000] node 0 low ram: 00000000 - 373fe000
- [ 0.000000] node 0 bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
- [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- [ 0.000000] #5 [00014cd000 - 00014d312f] BRK ==> [00014cd000 - 00014d312f]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [0000100000 - 000094b403] NEW RAMDISK ==> [0000100000 - 000094b403]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x000dffb0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000dffb0
- [ 0.000000] On node 0 totalpages: 917311
- [ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 5400 pages used for memmap
- [ 0.000000] HighMem zone: 685722 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
- [ 0.000000] If you got timer trouble try acpi_use_timer_override
- [ 0.000000] ACPI: PM-Timer IO Port: 0x508
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
- [ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3400000 s34328 r0 d23016 u524288
- [ 0.000000] pcpu-alloc: s34328 r0 d23016 u524288 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 910143
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=5eee7438-9bd0-47e2-ac24-9142338f34e0 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:000dffb0)
- [ 0.000000] Memory: 3624624k/3669696k available (2506k kernel code, 43336k reserved, 1326k data, 380k init, 2764488k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
- [ 0.000000] .data : 0xc1272b8b - 0xc13be4c4 (1326 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1272b8b (2506 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration failed
- [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
- [ 0.000000] Detected 3013.687 MHz processor.
- [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.37 BogoMIPS (lpj=12054748)
- [ 0.008015] Security Framework initialized
- [ 0.008020] SELinux: Disabled at boot.
- [ 0.008025] Mount-cache hash table entries: 512
- [ 0.008105] Initializing cgroup subsys ns
- [ 0.008107] Initializing cgroup subsys cpuacct
- [ 0.008109] Initializing cgroup subsys devices
- [ 0.008111] Initializing cgroup subsys freezer
- [ 0.008113] Initializing cgroup subsys net_cls
- [ 0.008125] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008127] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008128] CPU: Physical Processor ID: 0
- [ 0.008129] CPU: Processor Core ID: 0
- [ 0.008132] mce: CPU supports 6 MCE banks
- [ 0.008143] Performance Events: AMD PMU driver.
- [ 0.008146] ... version: 0
- [ 0.008147] ... bit width: 48
- [ 0.008149] ... generic registers: 4
- [ 0.008150] ... value mask: 0000ffffffffffff
- [ 0.008151] ... max period: 00007fffffffffff
- [ 0.008153] ... fixed-purpose events: 0
- [ 0.008154] ... event mask: 000000000000000f
- [ 0.008156] Checking 'hlt' instruction... OK.
- [ 0.024620] ACPI: Core revision 20090903
- [ 0.029449] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.029928] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
- [ 0.069624] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
- [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.012000] Initializing CPU#1
- [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.012000] CPU: Physical Processor ID: 0
- [ 0.012000] CPU: Processor Core ID: 1
- [ 0.156064] CPU1: AMD Athlon(tm) II X4 640 Processor stepping 03
- [ 0.156070] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.160075] Booting processor 2 APIC 0x2 ip 0x6000
- [ 0.012000] Initializing CPU#2
- [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.012000] CPU: Physical Processor ID: 0
- [ 0.012000] CPU: Processor Core ID: 2
- [ 0.248035] CPU2: AMD Athlon(tm) II X4 640 Processor stepping 03
- [ 0.248042] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.252074] Booting processor 3 APIC 0x3 ip 0x6000
- [ 0.012000] Initializing CPU#3
- [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.012000] CPU: Physical Processor ID: 0
- [ 0.012000] CPU: Processor Core ID: 3
- [ 0.340073] CPU3: AMD Athlon(tm) II X4 640 Processor stepping 03
- [ 0.340079] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.344044] Brought up 4 CPUs
- [ 0.344046] Total of 4 processors activated (24110.95 BogoMIPS).
- [ 0.344520] CPU0 attaching sched-domain:
- [ 0.344524] domain 0: span 0-3 level MC
- [ 0.344526] groups: group c3403778 cpus 0 group c3483778 cpus 1 group c3503778 cpus 2 group c3583778 cpus 3
- [ 0.344532] CPU1 attaching sched-domain:
- [ 0.344534] domain 0: span 0-3 level MC
- [ 0.344535] groups: group c3483778 cpus 1 group c3503778 cpus 2 group c3583778 cpus 3 group c3403778 cpus 0
- [ 0.344539] CPU2 attaching sched-domain:
- [ 0.344540] domain 0: span 0-3 level MC
- [ 0.344542] groups: group c3503778 cpus 2 group c3583778 cpus 3 group c3403778 cpus 0 group c3483778 cpus 1
- [ 0.344546] CPU3 attaching sched-domain:
- [ 0.344547] domain 0: span 0-3 level MC
- [ 0.344548] groups: group c3583778 cpus 3 group c3403778 cpus 0 group c3483778 cpus 1 group c3503778 cpus 2
- [ 0.344620] devtmpfs: initialized
- [ 0.344620] regulator: core version 0.5
- [ 0.344620] NET: Registered protocol family 16
- [ 0.344620] ACPI: bus type pci registered
- [ 0.344620] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
- [ 0.344620] PCI: Not using MMCONFIG.
- [ 0.344905] PCI: Using configuration type 1 for base access
- [ 0.344907] PCI: Using configuration type 1 for extended access
- [ 0.345075] bio: create slab <bio-0> at 0
- [ 0.345075] ACPI: EC: Look up EC in DSDT
- [ 0.349355] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.353007] ACPI: Interpreter enabled
- [ 0.353009] ACPI: (supports S0 S1 S4 S5)
- [ 0.353021] ACPI: Using IOAPIC for interrupt routing
- [ 0.353055] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
- [ 0.356589] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
- [ 0.356591] PCI: Using MMCONFIG for extended config space
- [ 0.362784] ACPI Warning: Incorrect checksum in table [OEMB] - 76, should be 71 (20090903/tbutils-314)
- [ 0.362873] ACPI: No dock devices found.
- [ 0.362955] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.363130] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
- [ 0.363163] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
- [ 0.363171] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
- [ 0.363175] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
- [ 0.363199] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.363204] pci 0000:00:01.1: PME# disabled
- [ 0.363245] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbefffff]
- [ 0.363267] pci 0000:00:02.0: supports D1 D2
- [ 0.363268] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363270] pci 0000:00:02.0: PME# disabled
- [ 0.363289] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbefec00-0xfbefecff]
- [ 0.363317] pci 0000:00:02.1: supports D1 D2
- [ 0.363319] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363321] pci 0000:00:02.1: PME# disabled
- [ 0.363377] pci 0000:00:05.0: reg 10 32bit mmio: [0xfbef8000-0xfbefbfff]
- [ 0.363406] pci 0000:00:05.0: PME# supported from D3hot D3cold
- [ 0.363408] pci 0000:00:05.0: PME# disabled
- [ 0.363436] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
- [ 0.363469] pci 0000:00:07.0: reg 10 32bit mmio: [0xfbefd000-0xfbefdfff]
- [ 0.363472] pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
- [ 0.363498] pci 0000:00:07.0: supports D1 D2
- [ 0.363499] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363502] pci 0000:00:07.0: PME# disabled
- [ 0.363519] pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
- [ 0.363522] pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
- [ 0.363524] pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
- [ 0.363527] pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
- [ 0.363530] pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
- [ 0.363533] pci 0000:00:08.0: reg 24 32bit mmio: [0xfbefc000-0xfbefcfff]
- [ 0.363561] pci 0000:00:08.1: reg 10 io port: [0xc800-0xc807]
- [ 0.363564] pci 0000:00:08.1: reg 14 io port: [0xc480-0xc483]
- [ 0.363567] pci 0000:00:08.1: reg 18 io port: [0xc400-0xc407]
- [ 0.363569] pci 0000:00:08.1: reg 1c io port: [0xc080-0xc083]
- [ 0.363572] pci 0000:00:08.1: reg 20 io port: [0xc000-0xc00f]
- [ 0.363575] pci 0000:00:08.1: reg 24 32bit mmio: [0xfbef7000-0xfbef7fff]
- [ 0.363625] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363627] pci 0000:00:09.0: PME# disabled
- [ 0.363659] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363661] pci 0000:00:0b.0: PME# disabled
- [ 0.363694] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.363696] pci 0000:00:0c.0: PME# disabled
- [ 0.363793] pci 0000:00:04.0: transparent bridge
- [ 0.363821] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.363828] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbfc0000-0xfbffffff]
- [ 0.363832] pci 0000:02:00.0: reg 20 io port: [0xe000-0xe0ff]
- [ 0.363839] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbfa0000-0xfbfbffff]
- [ 0.363872] pci 0000:02:00.0: supports D1 D2
- [ 0.363874] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
- [ 0.363876] pci 0000:02:00.0: PME# disabled
- [ 0.363910] pci 0000:02:00.1: reg 10 64bit mmio: [0xfbf9c000-0xfbf9ffff]
- [ 0.363955] pci 0000:02:00.1: supports D1 D2
- [ 0.372078] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
- [ 0.372082] pci 0000:00:09.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
- [ 0.372085] pci 0000:00:09.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.372161] pci_bus 0000:00: on NUMA node 0
- [ 0.372169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.372305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.372360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
- [ 0.372403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
- [ 0.372445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
- [ 0.396428] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.396560] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.396688] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.396814] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
- [ 0.396941] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
- [ 0.397068] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.397194] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.397321] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
- [ 0.397448] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
- [ 0.397575] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
- [ 0.397702] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
- [ 0.397830] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
- [ 0.397957] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
- [ 0.398084] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
- [ 0.398211] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
- [ 0.398338] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.398466] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
- [ 0.398592] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
- [ 0.398933] ACPI Warning for \_SB_.LATA._CRS: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
- [ 0.398937] ACPI Error (uteval-0307): Return object type is incorrect [\_SB_.LATA._CRS] (Node f6c161f8), AE_TYPE
- [ 0.398942] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 (20090903/uteval-313)
- [ 0.398945] ACPI Exception: AE_TYPE, Evaluating _CRS (20090903/pci_link-282)
- [ 0.398947] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
- [ 0.399017] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.399019] vgaarb: loaded
- [ 0.399039] PCI: Using ACPI for IRQ routing
- [ 0.399039] Switching to clocksource tsc
- [ 0.399039] pnp: PnP ACPI init
- [ 0.399039] ACPI: bus type pnp registered
- [ 0.400430] pnp: PnP ACPI: found 12 devices
- [ 0.400431] ACPI: ACPI bus type pnp unregistered
- [ 0.400433] PnPBIOS: Disabled by ACPI PNP
- [ 0.400442] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.400444] system 00:06: ioport range 0x500-0x57f has been reserved
- [ 0.400446] system 00:06: ioport range 0x580-0x5ff has been reserved
- [ 0.400448] system 00:06: ioport range 0x800-0x87f has been reserved
- [ 0.400450] system 00:06: ioport range 0x880-0x8ff has been reserved
- [ 0.400452] system 00:06: ioport range 0xd00-0xd7f has been reserved
- [ 0.400454] system 00:06: ioport range 0xd80-0xdff has been reserved
- [ 0.400456] system 00:06: ioport range 0x1100-0x117f has been reserved
- [ 0.400458] system 00:06: ioport range 0x1180-0x11ff has been reserved
- [ 0.400460] system 00:06: iomem range 0xfec80000-0xfd93ffff could not be reserved
- [ 0.400463] system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
- [ 0.400465] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
- [ 0.400467] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
- [ 0.400471] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.400473] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.400476] system 00:09: ioport range 0x280-0x28f has been reserved
- [ 0.400478] system 00:09: ioport range 0x290-0x29f has been reserved
- [ 0.400482] system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved
- [ 0.400485] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- [ 0.400487] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.400489] system 00:0b: iomem range 0x100000-0xdfffffff could not be reserved
- [ 0.400491] system 00:0b: iomem range 0xff380000-0xffffffff could not be reserved
- [ 0.435238] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
- [ 0.435239] pci 0000:00:04.0: IO window: disabled
- [ 0.435242] pci 0000:00:04.0: MEM window: disabled
- [ 0.435244] pci 0000:00:04.0: PREFETCH window: disabled
- [ 0.435247] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
- [ 0.435249] pci 0000:00:09.0: IO window: 0xe000-0xefff
- [ 0.435251] pci 0000:00:09.0: MEM window: 0xfbf00000-0xfbffffff
- [ 0.435254] pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
- [ 0.435257] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
- [ 0.435258] pci 0000:00:0b.0: IO window: disabled
- [ 0.435260] pci 0000:00:0b.0: MEM window: disabled
- [ 0.435262] pci 0000:00:0b.0: PREFETCH window: disabled
- [ 0.435264] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
- [ 0.435265] pci 0000:00:0c.0: IO window: disabled
- [ 0.435267] pci 0000:00:0c.0: MEM window: disabled
- [ 0.435269] pci 0000:00:0c.0: PREFETCH window: disabled
- [ 0.435275] pci 0000:00:04.0: setting latency timer to 64
- [ 0.435279] pci 0000:00:09.0: setting latency timer to 64
- [ 0.435282] pci 0000:00:0b.0: setting latency timer to 64
- [ 0.435285] pci 0000:00:0c.0: setting latency timer to 64
- [ 0.435288] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.435290] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.435292] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.435294] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
- [ 0.435296] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
- [ 0.435297] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
- [ 0.435299] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
- [ 0.435324] NET: Registered protocol family 2
- [ 0.435383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.435583] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.436005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.436218] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.436220] TCP reno registered
- [ 0.436294] NET: Registered protocol family 1
- [ 0.436555] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
- [ 0.436566] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 0.524665] pci 0000:00:02.0: PCI INT A disabled
- [ 0.524894] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
- [ 0.524903] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
- [ 0.524916] pci 0000:00:02.1: PCI INT B disabled
- [ 0.524956] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.524999] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525050] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525100] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525150] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525204] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525261] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525321] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.525328] pci 0000:02:00.0: Boot video device
- [ 0.525365] Unpacking initramfs...
- [ 0.678105] Freeing initrd memory: 8493k freed
- [ 0.681327] audit: initializing netlink socket (disabled)
- [ 0.681337] type=2000 audit(1360784846.680:1): initialized
- [ 0.683593] highmem bounce pool size: 64 pages
- [ 0.683597] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.684541] VFS: Disk quotas dquot_6.5.2
- [ 0.684597] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.684653] msgmni has been set to 1699
- [ 0.685055] alg: No test for stdrng (krng)
- [ 0.685139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.685143] io scheduler noop registered
- [ 0.685144] io scheduler anticipatory registered
- [ 0.685145] io scheduler deadline registered
- [ 0.685169] io scheduler cfq registered (default)
- [ 0.685238] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
- [ 0.685242] pcieport 0000:00:09.0: setting latency timer to 64
- [ 0.685295] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
- [ 0.685298] pcieport 0000:00:0b.0: setting latency timer to 64
- [ 0.685345] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
- [ 0.685348] pcieport 0000:00:0c.0: setting latency timer to 64
- [ 0.685432] isapnp: Scanning for PnP cards...
- [ 1.038178] isapnp: No Plug & Play device found
- [ 1.038899] Linux agpgart interface v0.103
- [ 1.039066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.039144] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.039348] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.039443] PNP: No PS/2 controller found. Probing ports directly.
- [ 1.042309] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.042321] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.042417] mice: PS/2 mouse device common for all mice
- [ 1.042457] rtc_cmos 00:02: RTC can wake from S4
- [ 1.042480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 1.042512] rtc0: alarms up to one year, y3k, 114 bytes nvram
- [ 1.042520] cpuidle: using governor ladder
- [ 1.042522] cpuidle: using governor menu
- [ 1.042525] No iBFT detected.
- [ 1.042752] TCP cubic registered
- [ 1.042839] NET: Registered protocol family 10
- [ 1.043325] Mobile IPv6
- [ 1.043327] NET: Registered protocol family 17
- [ 1.043339] Using IPI No-Shortcut mode
- [ 1.043376] PM: Resume from disk failed.
- [ 1.043383] registered taskstats version 1
- [ 1.043660] rtc_cmos 00:02: setting system clock to 2013-02-13 19:47:27 UTC (1360784847)
- [ 1.043691] Initalizing network drop monitor service
- [ 1.043710] Freeing unused kernel memory: 380k freed
- [ 1.043875] Write protecting the kernel text: 2508k
- [ 1.043892] Write protecting the kernel read-only data: 920k
- [ 1.058320] udev[76]: starting version 164
- [ 1.097321] usbcore: registered new interface driver usbfs
- [ 1.097355] usbcore: registered new interface driver hub
- [ 1.098556] usbcore: registered new device driver usb
- [ 1.102573] SCSI subsystem initialized
- [ 1.103801] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.104075] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
- [ 1.104085] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
- [ 1.104089] forcedeth 0000:00:07.0: setting latency timer to 64
- [ 1.105233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.117147] libata version 3.00 loaded.
- [ 1.165982] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:25:22:ec:79:31
- [ 1.165986] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
- [ 1.166039] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
- [ 1.166062] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 1.166065] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 1.166088] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 1.166119] ehci_hcd 0000:00:02.1: debug port 1
- [ 1.166126] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
- [ 1.166144] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbefec00
- [ 1.176788] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 1.176819] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.176821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.176823] usb usb1: Product: EHCI Host Controller
- [ 1.176825] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
- [ 1.176826] usb usb1: SerialNumber: 0000:00:02.1
- [ 1.176901] usb usb1: configuration #1 chosen from 1 choice
- [ 1.176923] hub 1-0:1.0: USB hub found
- [ 1.176930] hub 1-0:1.0: 10 ports detected
- [ 1.177004] sata_nv 0000:00:08.0: version 3.5
- [ 1.177243] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
- [ 1.177257] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
- [ 1.177302] sata_nv 0000:00:08.0: setting latency timer to 64
- [ 1.177418] scsi0 : sata_nv
- [ 1.177534] scsi1 : sata_nv
- [ 1.177743] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
- [ 1.177745] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
- [ 1.177789] pata_amd 0000:00:06.0: version 0.4.1
- [ 1.177828] pata_amd 0000:00:06.0: setting latency timer to 64
- [ 1.177956] scsi2 : pata_amd
- [ 1.178058] scsi3 : pata_amd
- [ 1.178869] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 1.178871] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 1.179164] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
- [ 1.179169] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
- [ 1.179207] sata_nv 0000:00:08.1: setting latency timer to 64
- [ 1.179307] scsi4 : sata_nv
- [ 1.179403] scsi5 : sata_nv
- [ 1.179658] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
- [ 1.179660] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
- [ 1.222102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.222124] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 1.222137] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 1.222140] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 1.222150] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
- [ 1.222162] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfbeff000
- [ 1.278821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.278824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.278826] usb usb2: Product: OHCI Host Controller
- [ 1.278827] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
- [ 1.278828] usb usb2: SerialNumber: 0000:00:02.0
- [ 1.278907] usb usb2: configuration #1 chosen from 1 choice
- [ 1.278932] hub 2-0:1.0: USB hub found
- [ 1.278939] hub 2-0:1.0: 10 ports detected
- [ 1.341249] ata3.00: ATA-6: WDC WD800BB-75JHC0, 06.01C06, max UDMA/100
- [ 1.341252] ata3.00: 156250000 sectors, multi 16: LBA
- [ 1.341270] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
- [ 1.349080] ata3.00: configured for UDMA/100
- [ 1.624054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.628721] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.632157] ata1.00: ATAPI: Optiarc DVD RW AD-7283S, 1.01, max UDMA/100
- [ 1.637068] ata5.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
- [ 1.637071] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.644047] usb 1-4: new high speed USB device using ehci_hcd and address 4
- [ 1.652169] ata1.00: configured for UDMA/100
- [ 1.652500] ata5.00: configured for UDMA/133
- [ 1.653386] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7283S 1.01 PQ: 0 ANSI: 5
- [ 1.777441] usb 1-4: New USB device found, idVendor=0bb4, idProduct=0ffe
- [ 1.777444] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
- [ 1.777446] usb 1-4: Product: Android Phone
- [ 1.777447] usb 1-4: Manufacturer: HTC
- [ 1.777448] usb 1-4: SerialNumber: HT27LW500403
- [ 1.777528] usb 1-4: configuration #1 chosen from 1 choice
- [ 1.978276] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.978486] scsi 2:0:0:0: Direct-Access ATA WDC WD800BB-75JH 06.0 PQ: 0 ANSI: 5
- [ 1.978652] ata4: port disabled. ignoring.
- [ 1.978754] scsi 4:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
- [ 2.080037] usb 2-1: new low speed USB device using ohci_hcd and address 2
- [ 2.302292] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.297837] usb 2-1: New USB device found, idVendor=046d, idProduct=c31c
- [ 2.297837] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.297837] usb 2-1: Product: USB Keyboard
- [ 2.297837] usb 2-1: Manufacturer: Logitech
- [ 2.302437] usb 2-1: configuration #1 chosen from 1 choice
- [ 2.307690] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 2.307710] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.307740] sd 4:0:0:0: [sdb] Write Protect is off
- [ 2.307742] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.307870] sd 2:0:0:0: [sda] Write Protect is off
- [ 2.307872] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.307880] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.307915] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.308081] sdb:
- [ 2.308151] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.314095] Uniform CD-ROM driver Revision: 3.20
- [ 2.314181] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 2.327692] sdb1 sdb2
- [ 2.328361] sd 4:0:0:0: [sdb] Attached SCSI disk
- [ 2.339539] sda1 sda2 < sda5 >
- [ 2.365400] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 2.368736] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 2.368760] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 2.368781] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 2.620038] usb 2-2: new full speed USB device using ohci_hcd and address 3
- [ 2.832869] usb 2-2: New USB device found, idVendor=09da, idProduct=9066
- [ 2.832872] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.832874] usb 2-2: Product: USB Device
- [ 2.832875] usb 2-2: Manufacturer: A4TECH
- [ 2.832954] usb 2-2: configuration #1 chosen from 1 choice
- [ 2.844165] usbcore: registered new interface driver hiddev
- [ 2.850048] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input0
- [ 2.850094] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.0-1/input0
- [ 2.864954] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input1
- [ 2.865011] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.0-1/input1
- [ 2.869158] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
- [ 2.869231] generic-usb 0003:09DA:9066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:02.0-2/input0
- [ 2.875034] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
- [ 2.875087] generic-usb 0003:09DA:9066.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:02.0-2/input1
- [ 2.875109] usbcore: registered new interface driver usbhid
- [ 2.875111] usbhid: v2.6:USB HID core driver
- [ 3.025461] PM: Starting manual resume from disk
- [ 3.025464] PM: Resume from partition 8:5
- [ 3.025465] PM: Checking hibernation image.
- [ 3.025673] PM: Error -22 checking image file
- [ 3.025675] PM: Resume from disk failed.
- [ 3.063627] kjournald starting. Commit interval 5 seconds
- [ 3.063639] EXT3-fs: mounted filesystem with ordered data mode.
- [ 4.981177] udev[448]: starting version 164
- [ 5.731532] processor LNXCPU:00: registered as cooling_device0
- [ 5.731566] processor LNXCPU:01: registered as cooling_device1
- [ 5.731595] processor LNXCPU:02: registered as cooling_device2
- [ 5.731617] processor LNXCPU:03: registered as cooling_device3
- [ 5.768930] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 5.768937] ACPI: Power Button [PWRB]
- [ 5.768984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
- [ 5.768987] ACPI: Power Button [PWRF]
- [ 5.890040] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 5.895975] parport_pc 00:05: reported by Plug and Play ACPI
- [ 5.896027] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- [ 6.213735] usbcore: registered new interface driver cdc_ether
- [ 6.214267] i2c i2c-0: nForce2 SMBus adapter at 0x600
- [ 6.214282] i2c i2c-1: nForce2 SMBus adapter at 0x700
- [ 6.324168] usb0: register 'rndis_host' at usb-0000:00:02.1-4, RNDIS device, 1e:a9:8b:bf:85:39
- [ 6.324192] usbcore: registered new interface driver rndis_host
- [ 6.368500] cfg80211: Using static regulatory domain info
- [ 6.368502] cfg80211: Regulatory domain: US
- [ 6.368504] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 6.368506] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- [ 6.368508] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.368510] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.368512] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.368513] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.368515] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 6.368521] cfg80211: Calling CRDA for country: US
- [ 6.387854] usbcore: registered new interface driver rndis_wlan
- [ 6.575534] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
- [ 6.575540] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
- [ 6.575543] hda_intel: Disable MSI for Nvidia chipset
- [ 6.575567] HDA Intel 0000:00:05.0: setting latency timer to 64
- [ 7.280442] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
- [ 7.280454] HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 19 (level, low) -> IRQ 19
- [ 7.280512] HDA Intel 0000:02:00.1: setting latency timer to 64
- [ 8.290928] Adding 3211256k swap on /dev/sda5. Priority:-1 extents:1 across:3211256k
- [ 8.649402] EXT3 FS on sda1, internal journal
- [ 8.817297] loop: module loaded
- [ 10.302926] fuse init (API version 7.13)
- [ 13.074806] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor processors (4 cpu cores) (version 2.20.00)
- [ 13.074840] powernow-k8: 0 : pstate 0 (3000 MHz)
- [ 13.074842] powernow-k8: 1 : pstate 1 (2300 MHz)
- [ 13.074843] powernow-k8: 2 : pstate 2 (1800 MHz)
- [ 13.074844] powernow-k8: 3 : pstate 3 (800 MHz)
- [ 15.092823] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
- [ 15.093009] eth0: no link during initialization.
- [ 15.093894] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 25.660040] usb0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement