Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- admin@nexenta:~# megacli -CfgDsply -a0
- ==============================================================================
- Adapter: 0
- Product Name: PERC 5/E Adapter
- Memory: 256MB
- BBU: Present
- Serial No: 12345
- ==============================================================================
- Number of DISK GROUPS: 4
- DISK GROUP: 0
- Number of Spans: 1
- SPAN: 0
- Span Reference: 0x00
- Number of PDs: 5
- Number of VDs: 1
- Number of dedicated Hotspares: 0
- Virtual Drive Information:
- Virtual Drive: 1 (Target Id: 1)
- Name :zpool
- RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
- Size : 2.726 TB
- Sector Size : 512
- Parity Size : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 5
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Physical Disk Information:
- Physical Disk: 0
- Enclosure Device ID: 130
- Slot Number: 9
- Drive's postion: DiskGroup: 0, Span: 0, Arm: 0
- Enclosure position: N/A
- Device Id: 136
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191047
- Connected Port Number: 0
- Inquiry Data: 5QD1Y9RKST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 1
- Enclosure Device ID: 130
- Slot Number: 11
- Drive's postion: DiskGroup: 0, Span: 0, Arm: 1
- Enclosure position: N/A
- Device Id: 134
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191045
- Connected Port Number: 0
- Inquiry Data: 5QD1Y9TVST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 2
- Enclosure Device ID: 130
- Slot Number: 12
- Drive's postion: DiskGroup: 0, Span: 0, Arm: 2
- Enclosure position: N/A
- Device Id: 133
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191044
- Connected Port Number: 0
- Inquiry Data: 5QD1ZQ6TST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 3
- Enclosure Device ID: 130
- Slot Number: 13
- Drive's postion: DiskGroup: 0, Span: 0, Arm: 3
- Enclosure position: N/A
- Device Id: 132
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191043
- Connected Port Number: 0
- Inquiry Data: 5QD1Y989ST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 4
- Enclosure Device ID: 130
- Slot Number: 14
- Drive's postion: DiskGroup: 0, Span: 0, Arm: 4
- Enclosure position: N/A
- Device Id: 131
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191042
- Connected Port Number: 0
- Inquiry Data: 5QD2WBZWST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- DISK GROUP: 1
- Number of Spans: 1
- SPAN: 0
- Span Reference: 0x01
- Number of PDs: 2
- Number of VDs: 1
- Number of dedicated Hotspares: 0
- Virtual Drive Information:
- Virtual Drive: 0 (Target Id: 0)
- Name :ESX01
- RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
- Size : 698.125 GB
- Sector Size : 512
- Mirror Data : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 2
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Physical Disk Information:
- Physical Disk: 0
- Enclosure Device ID: 130
- Slot Number: 5
- Drive's postion: DiskGroup: 1, Span: 0, Arm: 0
- Enclosure position: N/A
- Device Id: 140
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191083
- Connected Port Number: 0
- Inquiry Data: 5QD1Y9V3ST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 1
- Enclosure Device ID: 130
- Slot Number: 6
- Drive's postion: DiskGroup: 1, Span: 0, Arm: 1
- Enclosure position: N/A
- Device Id: 139
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191082
- Connected Port Number: 0
- Inquiry Data: 5QD1XZ1GST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- DISK GROUP: 2
- Number of Spans: 1
- SPAN: 0
- Span Reference: 0x02
- Number of PDs: 2
- Number of VDs: 1
- Number of dedicated Hotspares: 0
- Virtual Drive Information:
- Virtual Drive: 2 (Target Id: 2)
- Name :ESX02
- RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
- Size : 698.125 GB
- Sector Size : 512
- Mirror Data : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 2
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Physical Disk Information:
- Physical Disk: 0
- Enclosure Device ID: 130
- Slot Number: 10
- Drive's postion: DiskGroup: 2, Span: 0, Arm: 0
- Enclosure position: N/A
- Device Id: 135
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: G
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191046
- Connected Port Number: 0
- Inquiry Data: 3QD0YKYSST3750640NS 3.AEG
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 1
- Enclosure Device ID: 130
- Slot Number: 7
- Drive's postion: DiskGroup: 2, Span: 0, Arm: 1
- Enclosure position: N/A
- Device Id: 138
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: G
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191049
- Connected Port Number: 0
- Inquiry Data: 3QD0WB49ST3750640NS 3.AEG
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- DISK GROUP: 3
- Number of Spans: 1
- SPAN: 0
- Span Reference: 0x03
- Number of PDs: 5
- Number of VDs: 1
- Number of dedicated Hotspares: 0
- Virtual Drive Information:
- Virtual Drive: 3 (Target Id: 3)
- Name :data_arr2
- RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
- Size : 2.726 TB
- Sector Size : 512
- Parity Size : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 5
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Physical Disk Information:
- Physical Disk: 0
- Enclosure Device ID: 130
- Slot Number: 0
- Drive's postion: DiskGroup: 3, Span: 0, Arm: 0
- Enclosure position: N/A
- Device Id: 145
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: G
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191088
- Connected Port Number: 0
- Inquiry Data: 3QD0Y2LAST3750640NS 3.AEG
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 1
- Enclosure Device ID: 130
- Slot Number: 1
- Drive's postion: DiskGroup: 3, Span: 0, Arm: 1
- Enclosure position: N/A
- Device Id: 144
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191087
- Connected Port Number: 0
- Inquiry Data: 5QD1XZQGST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 2
- Enclosure Device ID: 130
- Slot Number: 2
- Drive's postion: DiskGroup: 3, Span: 0, Arm: 2
- Enclosure position: N/A
- Device Id: 143
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191086
- Connected Port Number: 0
- Inquiry Data: 5QD23T6GST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 3
- Enclosure Device ID: 130
- Slot Number: 3
- Drive's postion: DiskGroup: 3, Span: 0, Arm: 3
- Enclosure position: N/A
- Device Id: 142
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: G
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191085
- Connected Port Number: 0
- Inquiry Data: 3QD0WLTTST3750640NS 3.AEG
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Physical Disk: 4
- Enclosure Device ID: 130
- Slot Number: 4
- Drive's postion: DiskGroup: 3, Span: 0, Arm: 4
- Enclosure position: N/A
- Device Id: 141
- WWN:
- Sequence Number: 2
- Media Error Count: 0
- Other Error Count: 2
- Predictive Failure Count: 0
- Last Predictive Failure Event Seq Number: 0
- PD Type: SATA
- Raw Size: 698.636 GB [0x575466f0 Sectors]
- Non Coerced Size: 698.136 GB [0x574466f0 Sectors]
- Coerced Size: 698.125 GB [0x57440000 Sectors]
- Sector Size: 0
- Firmware state: Online, Spun Up
- Device Firmware Level: 3BKH
- Shield Counter: 0
- Successful diagnostics completion on : N/A
- SAS Address(0): 0x5001c232c9191084
- Connected Port Number: 0
- Inquiry Data: 5QD1XZ69ST3750640NS 3BKH
- FDE Capable: Not Capable
- FDE Enable: Disable
- Secured: Unsecured
- Locked: Unlocked
- Needs EKM Attention: No
- Foreign State: None
- Device Speed: Unknown
- Link Speed: Unknown
- Media Type: Hard Disk Device
- Drive Temperature : N/A
- PI Eligibility: No
- Drive is formatted for PI information: No
- PI: No PI
- Port-0 :
- Port status: Active
- Port's Linkspeed: Unknown
- Drive has flagged a S.M.A.R.T alert : No
- Exit Code: 0x00
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~# megacli -LDInfo -Lall -a0
- Adapter 0 -- Virtual Drive Information:
- Virtual Drive: 0 (Target Id: 0)
- Name :ESX01
- RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
- Size : 698.125 GB
- Sector Size : 512
- Mirror Data : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 2
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Virtual Drive: 1 (Target Id: 1)
- Name :zpool
- RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
- Size : 2.726 TB
- Sector Size : 512
- Parity Size : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 5
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Virtual Drive: 2 (Target Id: 2)
- Name :ESX02
- RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
- Size : 698.125 GB
- Sector Size : 512
- Mirror Data : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 2
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Virtual Drive: 3 (Target Id: 3)
- Name :data_arr2
- RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
- Size : 2.726 TB
- Sector Size : 512
- Parity Size : 698.125 GB
- State : Optimal
- Strip Size : 64 KB
- Number Of Drives : 5
- Span Depth : 1
- Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
- Default Access Policy: Read/Write
- Current Access Policy: Read/Write
- Disk Cache Policy : Disk's Default
- Encryption Type : None
- Is VD Cached: No
- Exit Code: 0x00
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~#
- admin@nexenta:~# megacli -AdpAllInfo -a0
- Adapter #0
- ==============================================================================
- Versions
- ================
- Product Name : PERC 5/E Adapter
- Serial No : 12345
- FW Package Build: 5.2.2-0076
- Mfg. Data
- ================
- Mfg. Date : 00/00/00
- Rework Date : 00/00/00
- Revision No : T_rySe
- Battery FRU : N/A
- Image Versions in Flash:
- ================
- Boot Block Version : R.2.3.12
- BIOS Version : MT28-9
- MPT Version : MPTFW-00.10.70.00-IT
- FW Version : 1.03.50-0461
- WebBIOS Version : 1.03-04
- Ctrl-R Version : 1.04-019A
- Pending Images in Flash
- ================
- None
- PCI Info
- ================
- Controller Id : 0000
- Vendor Id : 1028
- Device Id : 0015
- SubVendorId : 1028
- SubDeviceId : 1f01
- Host Interface : PCIE
- Link Speed : 0
- Number of Frontend Port: 0
- Device Interface : PCIE
- Number of Backend Port: 8
- Port : Address
- 0 5001c232c9191000
- 1 0000000000000000
- 2 0000000000000000
- 3 0000000000000000
- 4 0000000000000000
- 5 0000000000000000
- 6 0000000000000000
- 7 0000000000000000
- HW Configuration
- ================
- SAS Address : 5001e4f039a0b400
- BBU : Present
- Alarm : Present
- NVRAM : Present
- Serial Debugger : Present
- Memory : Present
- Flash : Present
- Memory Size : 256MB
- TPM : Absent
- On board Expander: Absent
- Upgrade Key : Absent
- Temperature sensor for ROC : Absent
- Temperature sensor for controller : Absent
- Settings
- ================
- Current Time : 11:51:24 8/2, 2014
- Predictive Fail Poll Interval : 300sec
- Interrupt Throttle Active Count : 16
- Interrupt Throttle Completion : 50us
- Rebuild Rate : 30%
- PR Rate : 30%
- BGI Rate : 30%
- Check Consistency Rate : 30%
- Reconstruction Rate : 30%
- Cache Flush Interval : 4s
- Max Drives to Spinup at One Time : 2
- Delay Among Spinup Groups : 12s
- Physical Drive Coercion Mode : 128MB
- Cluster Mode : Disabled
- Alarm : Disabled
- Auto Rebuild : Enabled
- Battery Warning : Enabled
- Ecc Bucket Size : 15
- Ecc Bucket Leak Rate : 1440 Minutes
- Restore HotSpare on Insertion : Disabled
- Expose Enclosure Devices : Disabled
- Maintain PD Fail History : Disabled
- Host Request Reordering : Enabled
- Auto Detect BackPlane Enabled : SGPIO/i2c SEP
- Load Balance Mode : Auto
- Use FDE Only : No
- Security Key Assigned : No
- Security Key Failed : No
- Security Key Not Backedup : No
- Default LD PowerSave Policy : Controller Defined
- Maximum number of direct attached drives to spin up in 1 min : 0
- Auto Enhanced Import : No
- Any Offline VD Cache Preserved : No
- Allow Boot with Preserved Cache : No
- Disable Online Controller Reset : No
- PFK in NVRAM : No
- Use disk activity for locate : No
- POST delay : 90 seconds
- BIOS Error Handling : Stop On Errors
- Current Boot Mode :Normal
- Capabilities
- ================
- RAID Level Supported : RAID0, RAID1, RAID5, RAID00, RAID10, RAID50, SRL 3 supported
- Supported Drives : SAS, SATA
- Allowed Mixing:
- Mix in Enclosure Allowed
- Status
- ================
- ECC Bucket Count : 0
- Limitations
- ================
- Max Arms Per VD : 32
- Max Spans Per VD : 8
- Max Arrays : 128
- Max Number of VDs : 64
- Max Parallel Commands : 1008
- Max SGE Count : 80
- Max Data Transfer Size : 8192 sectors
- Max Strips PerIO : 84
- Max LD per array : 0
- Min Strip Size : 8 KB
- Max Strip Size : 128 KB
- Max Configurable CacheCade Size: 0 GB
- Current Size of CacheCade : 0 GB
- Current Size of FW Cache : 0 MB
- Device Present
- ================
- Virtual Drives : 4
- Degraded : 0
- Offline : 0
- Physical Devices : 16
- Disks : 15
- Critical Disks : 0
- Failed Disks : 0
- Supported Adapter Operations
- ================
- Rebuild Rate : Yes
- CC Rate : Yes
- BGI Rate : Yes
- Reconstruct Rate : Yes
- Patrol Read Rate : Yes
- Alarm Control : Yes
- Cluster Support : No
- BBU : Yes
- Spanning : Yes
- Dedicated Hot Spare : Yes
- Revertible Hot Spares : No
- Foreign Config Import : Yes
- Self Diagnostic : Yes
- Allow Mixed Redundancy on Array : No
- Global Hot Spares : Yes
- Deny SCSI Passthrough : No
- Deny SMP Passthrough : No
- Deny STP Passthrough : No
- Support Security : No
- Snapshot Enabled : No
- Support the OCE without adding drives : No
- Support PFK : No
- Support PI : No
- Support Boot Time PFK Change : No
- Disable Online PFK Change : No
- Support Shield State : No
- Block SSD Write Disk Cache Change: No
- Support Data LD on SSC Array : No
- Supported VD Operations
- ================
- Read Policy : Yes
- Write Policy : Yes
- IO Policy : Yes
- Access Policy : Yes
- Disk Cache Policy : Yes
- Reconstruction : Yes
- Deny Locate : No
- Deny CC : No
- Allow Ctrl Encryption: No
- Enable LDBBM : No
- Support Breakmirror : No
- Power Savings : No
- Supported PD Operations
- ================
- Force Online : Yes
- Force Offline : Yes
- Force Rebuild : Yes
- Deny Force Failed : No
- Deny Force Good/Bad : No
- Deny Missing Replace : No
- Deny Clear : No
- Deny Locate : No
- Support Temperature : No
- Disable Copyback : No
- Enable JBOD : No
- Enable Copyback on SMART : No
- Enable Copyback to SSD on SMART Error : No
- Enable SSD Patrol Read : No
- PR Correct Unconfigured Areas : No
- Error Counters
- ================
- Memory Correctable Errors : 0
- Memory Uncorrectable Errors : 0
- Cluster Information
- ================
- Cluster Permitted : No
- Cluster Active : No
- Default Settings
- ================
- Phy Polarity : 0
- Phy PolaritySplit : 0
- Background Rate : 30
- Strip Size : 64kB
- Flush Time : 4 seconds
- Write Policy : WB
- Read Policy : None
- Cache When BBU Bad : Disabled
- Cached IO : No
- SMART Mode : Mode 6
- Alarm Disable : Yes
- Coercion Mode : 128MB
- ZCR Config : IDSEL
- Dirty LED Shows Drive Activity : No
- BIOS Continue on Error : 0
- Spin Down Mode : None
- Allowed Device Type : SAS/SATA Mix
- Allow Mix in Enclosure : Yes
- Allow HDD SAS/SATA Mix in VD : No
- Allow SSD SAS/SATA Mix in VD : No
- Allow HDD/SSD Mix in VD : No
- Allow SATA in Cluster : No
- Max Chained Enclosures : 3
- Disable Ctrl-R : No
- Enable Web BIOS : No
- Direct PD Mapping : No
- BIOS Enumerate VDs : No
- Restore Hot Spare on Insertion : No
- Expose Enclosure Devices : No
- Maintain PD Fail History : No
- Disable Puncturing : No
- Zero Based Enclosure Enumeration : No
- PreBoot CLI Enabled : Yes
- LED Show Drive Activity : No
- Cluster Disable : Yes
- SAS Disable : No
- Auto Detect BackPlane Enable : SGPIO/i2c SEP
- Use FDE Only : No
- Enable Led Header : No
- Delay during POST : 0
- EnableCrashDump : No
- Disable Online Controller Reset : No
- EnableLDBBM : No
- Un-Certified Hard Disk Drives : Block
- Treat Single span R1E as R10 : No
- Max LD per array : 16
- Power Saving option : All power saving options are enabled
- Default spin down time in minutes: 0
- Enable JBOD : No
- Time taken to detect CME : 254s
- Exit Code: 0x00
- admin@nexenta:~# lspci -vvv
- 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
- Subsystem: Intel Corporation Device 8086
- Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
- Address: fee00020 Data: 0000
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=1a, subordinate=25, sec-latency=0
- I/O behind bridge: 00006000-00007fff
- Memory behind bridge: c4000000-c7efffff
- Prefetchable memory behind bridge: 00000000c4000000-00000000c3ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
- Address: fee00000 Data: 0030
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
- I/O behind bridge: 00005000-00005fff
- Memory behind bridge: c8000000-c9ffffff
- Prefetchable memory behind bridge: 00000000c7f00000-00000000c7ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
- Address: fee06000 Data: 0081
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=10, subordinate=12, sec-latency=0
- I/O behind bridge: 00008000-0000ffff
- Memory behind bridge: c0000000-c3ffffff
- Prefetchable memory behind bridge: 00000000bff00000-00000000bfffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
- Address: fee01000 Data: 0082
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #4, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=45, subordinate=45, sec-latency=0
- I/O behind bridge: 00009000-00001fff
- Memory behind bridge: b0200000-b02fffff
- Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
- Address: fee00020 Data: 0000
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
- I/O behind bridge: 00008000-00007fff
- Memory behind bridge: b0000000-b00fffff
- Prefetchable memory behind bridge: 00000000c4000000-00000000c3ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
- Address: fee00020 Data: 0000
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode])
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=44, subordinate=44, sec-latency=0
- I/O behind bridge: 00009000-00001fff
- Memory behind bridge: b0100000-b01fffff
- Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
- Address: fee00020 Data: 0000
- Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #7, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise+ LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
- Subsystem: IBM Device 02dd
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 3
- Region 0: Memory at fe700000 (64-bit, non-prefetchable)
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: fee00000 Data: 0000
- Capabilities: [6c] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
- Subsystem: IBM Device 02dd
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
- Subsystem: Intel Corporation Device 8086
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
- Subsystem: Intel Corporation Device 8086
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
- Subsystem: Intel Corporation Device 8086
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
- Subsystem: Intel Corporation Device 8086
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
- Subsystem: IBM Device 02dd
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
- Subsystem: IBM Device 02dd
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
- I/O behind bridge: 00001000-00001fff
- Memory behind bridge: cd000000-cfffffff
- Prefetchable memory behind bridge: 00000000cd000000-00000000ccffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag+ RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [90] Subsystem: IBM Device 02dd
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 09) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
- I/O behind bridge: 00005000-00004fff
- Memory behind bridge: ca000000-ccffffff
- Prefetchable memory behind bridge: 00000000ca000000-00000000c9ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag+ RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [90] Subsystem: IBM Device 02dd
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 4
- Region 4: I/O ports at 2200
- 00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 11
- Region 4: I/O ports at 2600
- 00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 4
- Region 4: I/O ports at 2a00
- 00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 11
- Region 4: I/O ports at 2e00
- 00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
- Subsystem: IBM Device 02dd
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 4
- Region 0: Memory at f9000000 (32-bit, non-prefetchable)
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00003000-00004fff
- Memory behind bridge: de000000-dfffffff
- Prefetchable memory behind bridge: 00000000d0000000-00000000ddffffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: IBM Device 02dd
- 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) (prog-if 80 [Master])
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 0
- Region 0: I/O ports at 01f0
- Region 1: I/O ports at 03f4
- Region 2: I/O ports at 0170
- Region 3: I/O ports at 0374
- Region 4: I/O ports at 0480
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
- Subsystem: IBM Device 02dd
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 5
- Region 4: I/O ports at 0440
- 01:06.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI ES1000 (rev 02) (prog-if 00 [VGA controller])
- Subsystem: IBM Device 0305
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (2000ns min), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at d0000000 (32-bit, prefetchable)
- Region 1: I/O ports at 4000
- Region 2: Memory at dfff0000 (32-bit, non-prefetchable)
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 00001000-00001fff
- Memory behind bridge: cd000000-cfffffff
- Prefetchable memory behind bridge: 00000000cd000000-00000000ccffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [90] PCI-X bridge device
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
- Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
- Upstream: Capacity=0 CommitmentLimit=0
- Downstream: Capacity=0 CommitmentLimit=0
- Capabilities: [b0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
- 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
- Subsystem: IBM Device 0342
- Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (16000ns min), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 3
- Region 0: Memory at ce000000 (64-bit, non-prefetchable)
- Capabilities: [40] PCI-X non-bridge device
- Command: DPERE- ERO- RBC=512 OST=4
- Status: Dev=03:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
- Capabilities: [48] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
- Capabilities: [50] Vital Product Data
- Not readable
- Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: f7fffbfcfafbfffc Data: df1f
- 04:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02)
- Subsystem: IBM ServeRAID 8k/8k-l8
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at c9e00000 (64-bit, non-prefetchable)
- Region 2: Memory at c7fe0000 (64-bit, prefetchable)
- Region 4: I/O ports at 5000
- Capabilities: [40] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [e0] MSI: Enable+ Count=1/4 Maskable- 64bit+
- Address: 00000000fee07000 Data: 0040
- 05:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
- I/O behind bridge: 00005000-00004fff
- Memory behind bridge: ca000000-ccffffff
- Prefetchable memory behind bridge: 00000000ca000000-00000000c9ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [90] PCI-X bridge device
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
- Status: Dev=05:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
- Upstream: Capacity=0 CommitmentLimit=0
- Downstream: Capacity=0 CommitmentLimit=0
- Capabilities: [b0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
- 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
- Subsystem: IBM Device 0342
- Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (16000ns min), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at ca000000 (64-bit, non-prefetchable)
- Capabilities: [40] PCI-X non-bridge device
- Command: DPERE- ERO- RBC=512 OST=4
- Status: Dev=06:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
- Capabilities: [48] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
- Capabilities: [50] Vital Product Data
- Not readable
- Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: f3254ac1aea1ff38 Data: 1a73
- 10:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCI Express-to-PCI Express Bridge (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=10, secondary=11, subordinate=11, sec-latency=96
- I/O behind bridge: 00008000-00008fff
- Memory behind bridge: c1000000-c20fffff
- Prefetchable memory behind bridge: 00000000bff00000-00000000bfffffff
- Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [6c] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [d8] PCI-X bridge device
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
- Status: Dev=10:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
- Upstream: Capacity=65535 CommitmentLimit=65535
- Downstream: Capacity=65535 CommitmentLimit=65535
- 10:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCI Express-to-PCI Express Bridge (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=10, secondary=12, subordinate=12, sec-latency=96
- I/O behind bridge: 00009000-00009fff
- Memory behind bridge: c3000000-c3ffffff
- Prefetchable memory behind bridge: 00000000fff00000-00000000ffefffff
- Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [6c] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [d8] PCI-X bridge device
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
- Status: Dev=10:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
- Upstream: Capacity=65535 CommitmentLimit=65535
- Downstream: Capacity=65535 CommitmentLimit=65535
- 11:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5
- Subsystem: Dell PERC 5/E Adapter RAID Controller
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (32000ns min), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at bff00000 (32-bit, prefetchable)
- Region 2: Memory at c2000000 (32-bit, non-prefetchable)
- Capabilities: [c0] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [e0] PCI-X non-bridge device
- Command: DPERE- ERO- RBC=512 OST=16
- Status: Dev=11:0e.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
- 1a:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=1a, secondary=1b, subordinate=24, sec-latency=0
- I/O behind bridge: 00006000-00007fff
- Memory behind bridge: c4000000-c7efffff
- Prefetchable memory behind bridge: 00000000c4000000-00000000c3ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) Upstream Port, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000W
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [80] Subsystem: IBM Device 02dd
- 1a:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=1a, secondary=25, subordinate=25, sec-latency=64
- I/O behind bridge: 00009000-00001fff
- Memory behind bridge: f0000000-000fffff
- Prefetchable memory behind bridge: 00000000f0000000-00000000000fffff
- Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
- MaxPayload 256 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [6c] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [80] Subsystem: IBM Device 02dd
- Capabilities: [d8] PCI-X bridge device
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
- Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
- Upstream: Capacity=65535 CommitmentLimit=65535
- Downstream: Capacity=65535 CommitmentLimit=65535
- 1b:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=1b, secondary=1c, subordinate=1c, sec-latency=0
- I/O behind bridge: 00006000-00006fff
- Memory behind bridge: c6000000-c7efffff
- Prefetchable memory behind bridge: 00000000c4000000-00000000c3ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [80] Subsystem: IBM Device 02dd
- 1b:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=1b, secondary=24, subordinate=24, sec-latency=0
- I/O behind bridge: 00007000-00007fff
- Memory behind bridge: c4000000-c5ffffff
- Prefetchable memory behind bridge: 00000000c4000000-00000000c3ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [80] Subsystem: IBM Device 02dd
- 1c:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02)
- Subsystem: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 3
- Region 0: Memory at c7eff000 (64-bit, non-prefetchable)
- Region 2: Memory at c7efec00 (64-bit, non-prefetchable)
- Region 4: I/O ports at 6000
- Capabilities: [58] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=2/16 Maskable- 64bit+
- Address: 00000000fee00000 Data: 0042
- Capabilities: [44] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- 24:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02)
- Subsystem: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at c5fff000 (64-bit, non-prefetchable)
- Region 2: Memory at c5ffec00 (64-bit, non-prefetchable)
- Region 4: I/O ports at 7000
- Capabilities: [58] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=2/16 Maskable- 64bit+
- Address: 00000000fee07000 Data: 0044
- Capabilities: [44] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Advertisement
Add Comment
Please, Sign In to add comment