API tools faq
paste
Advertisement
tmax

Pandaboard ArchLinux Kernel panic

tmax
Dec 17th, 2015
307
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.57 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2015.10 (Oct 28 2015 - 23:11:23)
  3. OMAP4460 ES1.1
  4. SPL: Please implement spl_start_uboot() for your board
  5. SPL: Direct Linux boot not active!
  6.  
  7.  
  8. U-Boot 2015.10 (Oct 28 2015 - 23:11:23 -0600) Arch Linux ARM
  9.  
  10. CPU : OMAP4460 ES1.1
  11. Board: OMAP4 Panda
  12. I2C: ready
  13. DRAM: 1 GiB
  14. MMC: OMAP SD/MMC: 0
  15.  
  16. ** Unable to use mmc 0:1 for loading the env **
  17. Using default environment
  18.  
  19. Net: No ethernet found.
  20. Hit any key to stop autoboot: 0
  21. starting USB...
  22. USB0: USB EHCI 1.00
  23. scanning bus 0 for devices... 3 USB Device(s) found
  24. scanning usb for storage devices... 0 Storage Device(s) found
  25. scanning usb for ethernet devices... 1 Ethernet Device(s) found
  26. switch to partitions #0, OK
  27. mmc0 is current device
  28. mmc found on device 0
  29. Checking for: /boot/uEnv.txt ...
  30. 5188152 bytes read in 252 ms (19.6 MiB/s)
  31. loading /boot/dtbs/omap4-panda.dtb ...
  32. 99713 bytes read in 263 ms (370.1 KiB/s)
  33. ** File not found /boot/initramfs-linux.img **
  34. Kernel image @ 0x82000000 [ 0x000000 - 0x4f2a38 ]
  35. ## Flattened Device Tree blob at 88000000
  36. Booting using the fdt blob at 0x88000000
  37. Loading Device Tree to 8ffe4000, end 8ffff580 ... OK
  38.  
  39. Starting kernel ...
  40.  
  41. [ 0.000000] Booting Linux on physical CPU 0x0
  42. [ 0.000000] Initializing cgroup subsys cpuset
  43. [ 0.000000] Initializing cgroup subsys cpu
  44. [ 0.000000] Initializing cgroup subsys cpuacct
  45. [ 0.000000] Linux version 4.3.0-2-ARCH (builduser@leming) (gcc version 5.2.0 (GCC) ) #1 SMP Wed Nov 18 21:42:39 MST 2015
  46. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  47. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  48. [ 0.000000] Machine model: TI OMAP4 PandaBoard
  49. [ 0.000000] cma: Reserved 24 MiB at 0xbe000000
  50. [ 0.000000] Memory policy: Data cache writealloc
  51. [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier
  52. [ 0.000000] OMAP4460 ES1.1
  53. [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee8c000 s23552 r8192 d21504 u53248
  54. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922
  55. [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=PARTUUID=0ae76686-01 rw rootwait
  56. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  57. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  58. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  59. [ 0.000000] Memory: 992752K/1046528K available (10730K kernel code, 1228K rwdata, 4508K rodata, 1208K init, 928K bss, 29200K reserved, 24576K cma-reserved, 243712K highmem)
  60. [ 0.000000] Virtual kernel memory layout:
  61. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  63. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  64. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  65. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  66. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  67. [ 0.000000] .text : 0xc0008000 - 0xc0ee9b28 (15239 kB)
  68. [ 0.000000] .init : 0xc0eea000 - 0xc1018000 (1208 kB)
  69. [ 0.000000] .data : 0xc1018000 - 0xc114b120 (1229 kB)
  70. [ 0.000000] .bss : 0xc114e000 - 0xc12363c0 ( 929 kB)
  71. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  72. [ 0.000000] Hierarchical RCU implementation.
  73. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  74. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  75. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  76. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  77. [ 0.000000] GIC physical location is 0x48241000
  78. [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000
  79. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000
  80. [ 0.000000] L2C-310 erratum 769419 enabled
  81. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  82. [ 0.000000] OMAP L2C310: ROM does not support power control setting
  83. [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled
  84. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  85. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000
  86. [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck
  87. [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck
  88. [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck
  89. [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk
  90. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  91. [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
  92. [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
  93. [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
  94. [ 0.014495] Console: colour dummy device 80x30
  95. [ 0.014526] Calibrating delay loop... 1395.91 BogoMIPS (lpj=3489792)
  96. [ 0.035461] pid_max: default: 32768 minimum: 301
  97. [ 0.035614] Security Framework initialized
  98. [ 0.035797] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  99. [ 0.035827] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  100. [ 0.036621] Initializing cgroup subsys io
  101. [ 0.036651] Initializing cgroup subsys memory
  102. [ 0.036682] Initializing cgroup subsys devices
  103. [ 0.036712] Initializing cgroup subsys freezer
  104. [ 0.036743] Initializing cgroup subsys net_cls
  105. [ 0.036773] Initializing cgroup subsys perf_event
  106. [ 0.036773] Initializing cgroup subsys net_prio
  107. [ 0.036804] Initializing cgroup subsys pids
  108. [ 0.036865] CPU: Testing write buffer coherency: ok
  109. [ 0.036895] ftrace: allocating 39154 entries in 115 pages
  110. [ 0.124664] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  111. [ 0.124786] Setting up static identity map for 0x80008280 - 0x80008318
  112. [ 0.165466] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  113. [ 0.165557] Brought up 2 CPUs
  114. [ 0.165557] SMP: Total of 2 processors activated (2791.83 BogoMIPS).
  115. [ 0.165588] CPU: All CPU(s) started in SVC mode.
  116. [ 0.166564] devtmpfs: initialized
  117. [ 0.198303] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  118. [ 0.201293] omap_hwmod: l3_main_3 using broken dt data from ocp
  119. [ 0.203063] omap_hwmod: l3_main_2 using broken dt data from ocp
  120. [ 0.307189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  121. [ 0.309906] xor: measuring software checksum speed
  122. [ 0.355438] arm4regs : 969.600 MB/sec
  123. [ 0.405456] 8regs : 754.400 MB/sec
  124. [ 0.455444] 32regs : 795.200 MB/sec
  125. [ 0.505462] neon : 731.200 MB/sec
  126. [ 0.505462] xor: using function: arm4regs (969.600 MB/sec)
  127. [ 0.505584] pinctrl core: initialized pinctrl subsystem
  128. [ 0.507659] NET: Registered protocol family 16
  129. [ 0.510314] DMA: preallocated 256 KiB pool for atomic coherent allocations
  130. [ 0.520935] OMAP GPIO hardware version 0.1
  131. [ 0.525238] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  132. [ 0.525268] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
  133. [ 0.525787] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
  134. [ 0.526123] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
  135. [ 0.526458] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
  136. [ 0.538604] platform 4b501000.aes: Cannot lookup hwmod 'aes'
  137. [ 0.538879] platform 480a5000.des: Cannot lookup hwmod 'des'
  138. [ 0.544494] No ATAGs?
  139. [ 0.544525] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  140. [ 0.544555] hw-breakpoint: maximum watchpoint size is 4 bytes.
  141. [ 0.547973] OMAP DMA hardware revision 0.0
  142. [ 0.550170] Serial: AMBA PL011 UART driver
  143. [ 0.660980] raid6: int32x1 gen() 100 MB/s
  144. [ 0.745544] raid6: int32x1 xor() 116 MB/s
  145. [ 0.830688] raid6: int32x2 gen() 123 MB/s
  146. [ 0.915557] raid6: int32x2 xor() 111 MB/s
  147. [ 1.000701] raid6: int32x4 gen() 128 MB/s
  148. [ 1.085479] raid6: int32x4 xor() 98 MB/s
  149. [ 1.170776] raid6: int32x8 gen() 125 MB/s
  150. [ 1.255615] raid6: int32x8 xor() 89 MB/s
  151. [ 1.340576] raid6: neonx1 gen() 555 MB/s
  152. [ 1.425476] raid6: neonx1 xor() 410 MB/s
  153. [ 1.510528] raid6: neonx2 gen() 592 MB/s
  154. [ 1.595458] raid6: neonx2 xor() 523 MB/s
  155. [ 1.680480] raid6: neonx4 gen() 408 MB/s
  156. [ 1.765533] raid6: neonx4 xor() 377 MB/s
  157. [ 1.850616] raid6: neonx8 gen() 231 MB/s
  158. [ 1.935577] raid6: neonx8 xor() 197 MB/s
  159. [ 1.935577] raid6: using algorithm neonx2 gen() 592 MB/s
  160. [ 1.935607] raid6: .... xor() 523 MB/s, rmw enabled
  161. [ 1.935607] raid6: using intx1 recovery algorithm
  162. [ 1.942352] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
  163. [ 2.015563] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_gpio, deferring probe
  164. [ 2.022796] omap-iommu 4a066000.mmu: 4a066000.mmu registered
  165. [ 2.022918] omap-iommu 55082000.mmu: 55082000.mmu registered
  166. [ 2.024902] vgaarb: loaded
  167. [ 2.026153] SCSI subsystem initialized
  168. [ 2.026733] usbcore: registered new interface driver usbfs
  169. [ 2.026824] usbcore: registered new interface driver hub
  170. [ 2.026916] usbcore: registered new device driver usb
  171. [ 2.029266] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe
  172. [ 2.029327] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c2_pins, deferring probe
  173. [ 2.029357] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe
  174. [ 2.029388] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe
  175. [ 2.030548] media: Linux media interface: v0.10
  176. [ 2.030639] Linux video capture interface: v2.00
  177. [ 2.030761] pps_core: LinuxPPS API ver. 1 registered
  178. [ 2.030761] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  179. [ 2.030792] PTP clock support registered
  180. [ 2.030883] EDAC MC: Ver: 3.0.0
  181. [ 2.032104] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
  182. [ 2.032989] Advanced Linux Sound Architecture Driver Initialized.
  183. [ 2.033660] NetLabel: Initializing
  184. [ 2.033691] NetLabel: domain hash size = 128
  185. [ 2.033691] NetLabel: protocols = UNLABELED CIPSOv4
  186. [ 2.033752] NetLabel: unlabeled traffic allowed by default
  187. [ 2.034118] clocksource: Switched to clocksource 32k_counter
  188. [ 2.130401] NET: Registered protocol family 2
  189. [ 2.131134] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  190. [ 2.131225] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  191. [ 2.131378] TCP: Hash tables configured (established 8192 bind 8192)
  192. [ 2.131500] UDP hash table entries: 512 (order: 2, 16384 bytes)
  193. [ 2.131561] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  194. [ 2.131805] NET: Registered protocol family 1
  195. [ 2.132263] RPC: Registered named UNIX socket transport module.
  196. [ 2.132293] RPC: Registered udp transport module.
  197. [ 2.132293] RPC: Registered tcp transport module.
  198. [ 2.132293] RPC: Registered tcp NFSv4.1 backchannel transport module.
  199. [ 2.138427] futex hash table entries: 512 (order: 3, 32768 bytes)
  200. [ 2.146606] zbud: loaded
  201. [ 2.147125] VFS: Disk quotas dquot_6.6.0
  202. [ 2.147338] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  203. [ 2.149444] NFS: Registering the id_resolver key type
  204. [ 2.149475] Key type id_resolver registered
  205. [ 2.149505] Key type id_legacy registered
  206. [ 2.149536] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  207. [ 2.155212] jitterentropy: Initialization failed with host not compliant with requirements: 2
  208. [ 2.155334] bounce: pool size: 64 pages
  209. [ 2.155548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  210. [ 2.155700] io scheduler noop registered
  211. [ 2.155731] io scheduler deadline registered
  212. [ 2.155792] io scheduler cfq registered (default)
  213. [ 2.161956] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
  214. [ 2.162231] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
  215. [ 2.172882] tfp410 encoder@0: failed to find video source
  216. [ 2.173187] tpd12s015 encoder@1: failed to find video source
  217. [ 2.173461] connector-dvi connector@0: failed to find video source
  218. [ 2.173736] connector-hdmi connector@1: failed to find video source
  219. [ 2.259094] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  220. [ 2.261871] Serial: AMBA driver
  221. [ 2.263916] omap_uart 4806a000.serial: no wakeirq for uart0
  222. [ 2.264099] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 226, base_baud = 3000000) is a OMAP UART0
  223. [ 2.264709] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 227, base_baud = 3000000) is a OMAP UART1
  224. [ 2.265228] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 228, base_baud = 3000000) is a OMAP UART2
  225. [ 3.371032] console [ttyO2] enabled
  226. [ 3.375244] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 229, base_baud = 3000000) is a OMAP UART3
  227. [ 3.386138] [drm] Initialized drm 1.1.0 20060810
  228. [ 3.403808] loop: module loaded
  229. [ 3.409606] Loading iSCSI transport class v2.0-870.
  230. [ 3.415222] iscsi: registered transport (tcp)
  231. [ 3.430938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  232. [ 3.437805] ehci-pci: EHCI PCI platform driver
  233. [ 3.442535] ehci-platform: EHCI generic platform driver
  234. [ 3.448364] ehci-mxc: Freescale On-Chip EHCI Host driver
  235. [ 3.454101] ehci-omap: OMAP-EHCI Host Controller driver
  236. [ 3.480010] ehci-omap 4a064c00.ehci: EHCI Host Controller
  237. [ 3.485900] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
  238. [ 3.494171] ehci-omap 4a064c00.ehci: irq 333, io mem 0x4a064c00
  239. [ 3.509155] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
  240. [ 3.515594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  241. [ 3.522735] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  242. [ 3.530303] usb usb1: Product: EHCI Host Controller
  243. [ 3.535430] usb usb1: Manufacturer: Linux 4.3.0-2-ARCH ehci_hcd
  244. [ 3.541656] usb usb1: SerialNumber: 4a064c00.ehci
  245. [ 3.547302] hub 1-0:1.0: USB hub found
  246. [ 3.551330] hub 1-0:1.0: 3 ports detected
  247. [ 3.556213] ehci-orion: EHCI orion driver
  248. [ 3.560729] ehci-exynos: EHCI EXYNOS driver
  249. [ 3.565399] tegra-ehci: Tegra EHCI driver
  250. [ 3.569885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  251. [ 3.576446] ohci-pci: OHCI PCI platform driver
  252. [ 3.581207] ohci-platform: OHCI generic platform driver
  253. [ 3.586975] ohci-exynos: OHCI EXYNOS driver
  254. [ 3.591613] ohci-omap3: OHCI OMAP3 driver
  255. [ 3.596099] ohci-omap3 4a064800.ohci: OHCI Host Controller
  256. [ 3.602111] ohci-omap3 4a064800.ohci: new USB bus registered, assigned bus number 2
  257. [ 3.610321] ohci-omap3 4a064800.ohci: irq 332, io mem 0x4a064800
  258. [ 3.689392] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  259. [ 3.696533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. [ 3.704101] usb usb2: Product: OHCI Host Controller
  261. [ 3.709228] usb usb2: Manufacturer: Linux 4.3.0-2-ARCH ohci_hcd
  262. [ 3.715423] usb usb2: SerialNumber: 4a064800.ohci
  263. [ 3.721038] hub 2-0:1.0: USB hub found
  264. [ 3.725067] hub 2-0:1.0: 3 ports detected
  265. [ 3.729980] usbcore: registered new interface driver uas
  266. [ 3.735748] usbcore: registered new interface driver usb-storage
  267. [ 3.742126] usbcore: registered new interface driver ums-cypress
  268. [ 3.748474] usbcore: registered new interface driver ums_eneub6250
  269. [ 3.755157] usbcore: registered new interface driver ums-freecom
  270. [ 3.761535] usbcore: registered new interface driver ums-isd200
  271. [ 3.767822] usbcore: registered new interface driver ums-usbat
  272. [ 3.774780] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  273. [ 3.781097] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 3
  274. [ 3.789489] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  275. [ 3.796630] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  276. [ 3.804229] usb usb3: Product: MUSB HDRC host driver
  277. [ 3.809448] usb usb3: Manufacturer: Linux 4.3.0-2-ARCH musb-hcd
  278. [ 3.815643] usb usb3: SerialNumber: musb-hdrc.0.auto
  279. [ 3.821868] hub 3-0:1.0: USB hub found
  280. [ 3.825897] hub 3-0:1.0: 1 port detected
  281. [ 3.852813] i2c /dev entries driver
  282. [ 3.868438] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  283. [ 3.875701] usb 1-1: new high-speed USB device number 2 using ehci-omap
  284. [ 3.888122] sdhci: Secure Digital Host Controller Interface driver
  285. [ 3.894622] sdhci: Copyright(c) Pierre Ossman
  286. [ 3.934722] Synopsys Designware Multimedia Card Interface Driver
  287. [ 3.942352] sdhci-pltfm: SDHCI platform and OF driver helper
  288. [ 3.950256] ledtrig-cpu: registered to indicate activity on CPUs
  289. [ 3.957244] omap-aes 4b501000.aes: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
  290. [ 3.966278] omap-aes 4b501000.aes: omap_aes_probe: failed to get_sync(-19)
  291. [ 3.973510] omap-aes 4b501000.aes: initialization failed.
  292. [ 3.979522] omap-des 480a5000.des: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
  293. [ 3.988555] omap-des 480a5000.des: omap_des_probe: failed to get_sync(-19)
  294. [ 3.995788] omap-des 480a5000.des: initialization failed.
  295. [ 4.002777] hidraw: raw HID events driver (C) Jiri Kosina
  296. [ 4.009063] usbcore: registered new interface driver usbhid
  297. [ 4.014923] usbhid: USB HID core driver
  298. [ 4.019256] ashmem: initialized
  299. [ 4.027984] emif 4c000000.emif: emif_probe: device configured with addr = f00a6000 and IRQ247
  300. [ 4.037261] emif 4d000000.emif: emif_probe: device configured with addr = f00a8000 and IRQ248
  301. [ 4.039581] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  302. [ 4.039581] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  303. [ 4.046783] hub 1-1:1.0: USB hub found
  304. [ 4.046936] hub 1-1:1.0: 5 ports detected
  305. [ 4.071746] oprofile: no performance counters
  306. [ 4.076477] oprofile: using timer interrupt.
  307. [ 4.082305] NET: Registered protocol family 10
  308. [ 4.088165] mip6: Mobile IPv6
  309. [ 4.091339] NET: Registered protocol family 17
  310. [ 4.096191] Key type dns_resolver registered
  311. [ 4.101043] twl: not initialized
  312. [ 4.104492] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  313. [ 4.113006] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  314. [ 4.121520] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  315. [ 4.130035] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  316. [ 4.138519] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  317. [ 4.147003] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  318. [ 4.155456] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
  319. [ 4.163909] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
  320. [ 4.171142] omap2_set_init_voltage: unable to set vdd_mpu
  321. [ 4.176849] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
  322. [ 4.184204] omap2_set_init_voltage: unable to set vdd_core
  323. [ 4.190032] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
  324. [ 4.197326] omap2_set_init_voltage: unable to set vdd_iva
  325. [ 4.205047] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 699977 KHz
  326. [ 4.212921] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz
  327. [ 4.222015] Alignment trap: not handling instruction e0a55001 at [<c00b9ee8>]
  328. [ 4.229583] Unhandled fault: alignment exception (0x801) at 0x000009f6
  329. [ 4.236480] pgd = c0004000
  330. [ 4.239349] [000009f6] *pgd=00000000
  331. [ 4.243133] Internal error: : 801 [#1] SMP ARM
  332. [ 4.247863] Modules linked in:
  333. [ 4.251098] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-2-ARCH #1
  334. [ 4.257904] Hardware name: Generic OMAP4 (Flattened Device Tree)
  335. [ 4.264282] task: c1020328 ti: c1018000 task.ti: c1018000
  336. [ 4.270019] PC is at ktime_get+0xc8/0x104
  337. [ 4.274261] LR is at ktime_get+0x6c/0x104
  338. [ 4.278503] pc : [<c00b9eec>] lr : [<c00b9e90>] psr: 80000193
  339. [ 4.278503] sp : c1019e50 ip : 00000598 fp : c1019e94
  340. [ 4.290679] r10: 00000000 r9 : 00000000 r8 : 000a04ee
  341. [ 4.296203] r7 : c1196600 r6 : c1019ea0 r5 : 000009f6 r4 : e6988400
  342. [ 4.303131] r3 : 77359400 r2 : 00000010 r1 : 0000000b r0 : a43b7400
  343. [ 4.310028] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
  344. [ 4.317687] Control: 10c5387d Table: 8000404a DAC: 00000051
  345. [ 4.323791] Process swapper/0 (pid: 0, stack limit = 0xc1018220)
  346. [ 4.330139] Stack: (0xc1019e50 to 0xc101a000)
  347. [ 4.334747] 9e40: 425d1000 000009f6 ffffffff 00000000
  348. [ 4.343414] 9e60: 000a0507 00000000 ee6b2800 00000000 eee8cf28 c1014584 c1019f20 00000000
  349. [ 4.352111] 9e80: 00000000 c0f91a28 c1019ec4 c1019e98 c00c45c8 c00b9e30 c1019ec4 c1019ea8
  350. [ 4.360778] 9ea0: c00ae404 c00ab350 00000004 c1014584 c1019f20 00000000 c1019ed4 c1019ec8
  351. [ 4.369445] 9ec0: c00545a8 c00c458c c1019efc c1019ed8 c0016fc0 c0054560 c101c9b0 fa240100
  352. [ 4.378112] 9ee0: c1019f20 fa241100 eeea8140 c0f91a28 c1019f1c c1019f00 c000973c c0016ee0
  353. [ 4.386779] 9f00: c00101d4 60000113 ffffffff c1019f54 c1019f7c c1019f20 c09a0b94 c00096c8
  354. [ 4.395446] 9f20: 00000000 00000bdc eee8c45c c0024120 c114e040 c1012424 c101b5c4 c101b4c0
  355. [ 4.404113] 9f40: eeea8140 c0f91a28 00000000 c1019f7c c1019f80 c1019f70 c00101d0 c00101d4
  356. [ 4.412780] 9f60: 60000113 ffffffff 00000051 c008d5d8 c1019f8c c1019f80 c008d5d8 c00101a4
  357. [ 4.421447] 9f80: c1019fa4 c1019f90 c008d7c4 c008d5ac c114e040 c101b4c0 c1019fb4 c1019fa8
  358. [ 4.430114] 9fa0: c099b5fc c008d5e8 c1019ff4 c1019fb8 c0eeacd0 c099b594 ffffffff ffffffff
  359. [ 4.438781] 9fc0: 00000000 c0eea6cc 00000000 c0f91a28 c114e394 c101b544 c0f91a24 c10217e4
  360. [ 4.447448] 9fe0: 8000406a 412fc09a 00000000 c1019ff8 8000807c c0eea968 00000000 00000000
  361. [ 4.456146] [<c00b9eec>] (ktime_get) from [<c00c45c8>] (tick_irq_enter+0x48/0xc4)
  362. [ 4.464080] [<c00c45c8>] (tick_irq_enter) from [<c00545a8>] (irq_enter+0x54/0x78)
  363. [ 4.472015] [<c00545a8>] (irq_enter) from [<c0016fc0>] (handle_IPI+0xec/0x234)
  364. [ 4.479675] [<c0016fc0>] (handle_IPI) from [<c000973c>] (gic_handle_irq+0x80/0x88)
  365. [ 4.487701] [<c000973c>] (gic_handle_irq) from [<c09a0b94>] (__irq_svc+0x54/0x70)
  366. [ 4.495635] Exception stack(0xc1019f20 to 0xc1019f68)
  367. [ 4.501007] 9f20: 00000000 00000bdc eee8c45c c0024120 c114e040 c1012424 c101b5c4 c101b4c0
  368. [ 4.509674] 9f40: eeea8140 c0f91a28 00000000 c1019f7c c1019f80 c1019f70 c00101d0 c00101d4
  369. [ 4.518341] 9f60: 60000113 ffffffff
  370. [ 4.522033] [<c09a0b94>] (__irq_svc) from [<c00101d4>] (arch_cpu_idle+0x3c/0x48)
  371. [ 4.529907] [<c00101d4>] (arch_cpu_idle) from [<c008d5d8>] (default_idle_call+0x38/0x3c)
  372. [ 4.538482] [<c008d5d8>] (default_idle_call) from [<c008d7c4>] (cpu_startup_entry+0x1e8/0x254)
  373. [ 4.547637] [<c008d7c4>] (cpu_startup_entry) from [<c099b5fc>] (rest_init+0x74/0x8c)
  374. [ 4.555847] [<c099b5fc>] (rest_init) from [<c0eeacd0>] (start_kernel+0x374/0x3e4)
  375. [ 4.563781] [<c0eeacd0>] (start_kernel) from [<8000807c>] (0x8000807c)
  376. [ 4.570709] Code: e0211593 e14b44d4 e0944000 e0a55001 (e1a00004)
  377. [ 4.577148] ---[ end trace c8a1062e7a96744f ]---
  378. [ 4.582061] Kernel panic - not syncing: Fatal exception in interrupt
  379. [ 5.723724] SMP: failed to stop secondary CPUs
  380. [ 5.728424] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!