API tools faq
paste
Advertisement
Guest User

nsa310tdc

a guest
Nov 29th, 2011
197
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.08 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.11.29 22:32:07 =~=~=~=~=~=~=~=~=~=~=~=
  2. þ
  3. __ __ _ _
  4. | \/ | __ _ _ ____ _____| | |
  5. | |\/| |/ _` | '__\ \ / / _ \ | |
  6. | | | | (_| | | \ V / __/ | |
  7. |_| |_|\__,_|_| \_/ \___|_|_|
  8. _ _ ____ _
  9. | | | | | __ ) ___ ___ | |_
  10. | | | |___| _ \ / _ \ / _ \| __|
  11. | |_| |___| |_) | (_) | (_) | |_
  12. \___/ |____/ \___/ \___/ \__|
  13. ** MARVELL BOARD: RD-88F6281A LE
  14.  
  15. U-Boot 1.1.4 (Feb 22 2011 - 10:31:35) Marvell version: 3.4.19
  16.  
  17. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFEE0
  18.  
  19. Soc: 88F6281 A1 (DDR2)
  20. CPU running @ 1200Mhz L2 running @ 400Mhz
  21. SysClock = 400Mhz , TClock = 200Mhz
  22.  
  23. DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  24. DRAM CS[0] base 0x00000000 size 256MB
  25. DRAM Total size 256MB 16bit width
  26. Addresses 10M - 0M are saved for the U-Boot usage.
  27. Mem malloc Initialization (10M - 7M): Done
  28. NAND:128 MB
  29. Flash: 0 kB
  30.  
  31. CPU : Marvell Feroceon (Rev 1)
  32. Kernel address is 0xc80000.
  33.  
  34. Streaming disabled
  35. Write allocate disabled
  36.  
  37. Module 0 is RGMII
  38. Module 1 is TDM
  39.  
  40. USB 0: host mode
  41. PEX 0: PCI Express Root Complex Interface
  42. PEX interface detected Link X1
  43. Net: egiga0, egiga1 [PRIME]
  44. Hit any key to stop autoboot: 2  1  0
  45.  
  46. NAND read: device 0 offset 0xc80000, size 0xa00000
  47.  
  48.  
  49. Reading data from 0xc80000 -- 0% complete.
  50. Reading data from 0xc99800 -- 1% complete.
  51. Reading data from 0xcb3000 -- 2% complete.
  52. Reading data from 0xccc800 -- 3% complete.
  53. Reading data from 0xce6000 -- 4% complete.
  54. Reading data from 0xcff800 -- 5% complete.
  55. Reading data from 0xd19800 -- 6% complete.
  56. Reading data from 0xd33000 -- 7% complete.
  57. Reading data from 0xd4c800 -- 8% complete.
  58. Reading data from 0xd66000 -- 9% complete.
  59. Reading data from 0xd7f800 -- 10% complete.
  60. Reading data from 0xd99800 -- 11% complete.
  61. Reading data from 0xdb3000 -- 12% complete.
  62. Reading data from 0xdcc800 -- 13% complete.
  63. Reading data from 0xde6000 -- 14% complete.
  64. Reading data from 0xdff800 -- 15% complete.
  65. Reading data from 0xe19800 -- 16% complete.
  66. Reading data from 0xe33000 -- 17% complete.
  67. Reading data from 0xe4c800 -- 18% complete.
  68. Reading data from 0xe66000 -- 19% complete.
  69. Reading data from 0xe7f800 -- 20% complete.
  70. Reading data from 0xe99800 -- 21% complete.
  71. Reading data from 0xeb3000 -- 22% complete.
  72. Reading data from 0xecc800 -- 23% complete.
  73. Reading data from 0xee6000 -- 24% complete.
  74. Reading data from 0xeff800 -- 25% complete.
  75. Reading data from 0xf19800 -- 26% complete.
  76. Reading data from 0xf33000 -- 27% complete.
  77. Reading data from 0xf4c800 -- 28% complete.
  78. Reading data from 0xf66000 -- 29% complete.
  79. Reading data from 0xf7f800 -- 30% complete.
  80. Reading data from 0xf99800 -- 31% complete.
  81. Reading data from 0xfb3000 -- 32% complete.
  82. Reading data from 0xfcc800 -- 33% complete.
  83. Reading data from 0xfe6000 -- 34% complete.
  84. Reading data from 0xfff800 -- 35% complete.
  85. Reading data from 0x1019800 -- 36% complete.
  86. Reading data from 0x1033000 -- 37% complete.
  87. Reading data from 0x104c800 -- 38% complete.
  88. Reading data from 0x1066000 -- 39% complete.
  89. Reading data from 0x107f800 -- 40% complete.
  90. Reading data from 0x1099800 -- 41% complete.
  91. Reading data from 0x10b3000 -- 42% complete.
  92. Reading data from 0x10cc800 -- 43% complete.
  93. Reading data from 0x10e6000 -- 44% complete.
  94. Reading data from 0x10ff800 -- 45% complete.
  95. Reading data from 0x1119800 -- 46% complete.
  96. Reading data from 0x1133000 -- 47% complete.
  97. Reading data from 0x114c800 -- 48% complete.
  98. Reading data from 0x1166000 -- 49% complete.
  99. Reading data from 0x117f800 -- 50% complete.
  100. Reading data from 0x1199800 -- 51% complete.
  101. Reading data from 0x11b3000 -- 52% complete.
  102. Reading data from 0x11cc800 -- 53% complete.
  103. Reading data from 0x11e6000 -- 54% complete.
  104. Reading data from 0x11ff800 -- 55% complete.
  105. Reading data from 0x1219800 -- 56% complete.
  106. Reading data from 0x1233000 -- 57% complete.
  107. Reading data from 0x124c800 -- 58% complete.
  108. Reading data from 0x1266000 -- 59% complete.
  109. Reading data from 0x127f800 -- 60% complete.
  110. Reading data from 0x1299800 -- 61% complete.
  111. Reading data from 0x12b3000 -- 62% complete.
  112. Reading data from 0x12cc800 -- 63% complete.
  113. Reading data from 0x12e6000 -- 64% complete.
  114. Reading data from 0x12ff800 -- 65% complete.
  115. Reading data from 0x1319800 -- 66% complete.
  116. Reading data from 0x1333000 -- 67% complete.
  117. Reading data from 0x134c800 -- 68% complete.
  118. Reading data from 0x1366000 -- 69% complete.
  119. Reading data from 0x137f800 -- 70% complete.
  120. Reading data from 0x1399800 -- 71% complete.
  121. Reading data from 0x13b3000 -- 72% complete.
  122. Reading data from 0x13cc800 -- 73% complete.
  123. Reading data from 0x13e6000 -- 74% complete.
  124. Reading data from 0x13ff800 -- 75% complete.
  125. Reading data from 0x1419800 -- 76% complete.
  126. Reading data from 0x1433000 -- 77% complete.
  127. Reading data from 0x144c800 -- 78% complete.
  128. Reading data from 0x1466000 -- 79% complete.
  129. Reading data from 0x147f800 -- 80% complete.
  130. Reading data from 0x1499800 -- 81% complete.
  131. Reading data from 0x14b3000 -- 82% complete.
  132. Reading data from 0x14cc800 -- 83% complete.
  133. Reading data from 0x14e6000 -- 84% complete.
  134. Reading data from 0x14ff800 -- 85% complete.
  135. Reading data from 0x1519800 -- 86% complete.
  136. Reading data from 0x1533000 -- 87% complete.
  137. Reading data from 0x154c800 -- 88% complete.
  138. Reading data from 0x1566000 -- 89% complete.
  139. Reading data from 0x157f800 -- 90% complete.
  140. Reading data from 0x1599800 -- 91% complete.
  141. Reading data from 0x15b3000 -- 92% complete.
  142. Reading data from 0x15cc800 -- 93% complete.
  143. Reading data from 0x15e6000 -- 94% complete.
  144. Reading data from 0x15ff800 -- 95% complete.
  145. Reading data from 0x1619800 -- 96% complete.
  146. Reading data from 0x1633000 -- 97% complete.
  147. Reading data from 0x164c800 -- 98% complete.
  148. Reading data from 0x1666000 -- 99% complete.
  149. Reading data from 0x167f800 -- 100% complete.
  150. 10485760 bytes read: OK
  151. ## Booting image at 02000000 ...
  152. Image Name: Linux-2.6.22.18
  153. Created: 2011-02-22 3:33:51 UTC
  154. Image Type: ARM Linux Kernel Image (uncompressed)
  155. Data Size: 5701144 Bytes = 5.4 MB
  156. Load Address: 00008000
  157. Entry Point: 00008000
  158. Verifying Checksum ... OK
  159. OK
  160.  
  161. Starting kernel ...
  162.  
  163. Uncompressing Linux..................................................................................................................................................................................................................................................................... done, booting the kernel.
  164.  
  165. Linux version 2.6.22.18 (root@Neo) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.70.0501961 2005-12-18)) #2 Tue Feb 22 11:33:29 CST 2011
  166. CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
  167. Machine: Feroceon-KW
  168. Using UBoot passing parameters structure
  169. Memory policy: ECC disabled, Data cache writeback
  170. CPU0: D VIVT write-back cache
  171. CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  172. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  173. Built 1 zonelists. Total pages: 65024
  174. Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init
  175. PID hash table entries: 1024 (order: 10, 4096 bytes)
  176. Console: colour dummy device 80x30
  177. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  178. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  179. Memory: 256MB 0MB 0MB 0MB = 256MB total
  180. Memory: 251392KB available (4832K code, 403K data, 3116K init)
  181. Mount-cache hash table entries: 512
  182. CPU: Testing write buffer coherency: ok
  183. NET: Registered protocol family 16
  184.  
  185. CPU Interface
  186. -------------
  187. SDRAM_CS0 ....base 00000000, size 256MB
  188. SDRAM_CS1 ....disable
  189. SDRAM_CS2 ....disable
  190. SDRAM_CS3 ....disable
  191. PEX0_MEM ....base e8000000, size 128MB
  192. PEX0_IO ....base f2000000, size 1MB
  193. INTER_REGS ....base f1000000, size 1MB
  194. NFLASH_CS ....base fa000000, size 2MB
  195. SPI_CS ....base f4000000, size 16MB
  196. BOOT_ROM_CS ....no such
  197. DEV_BOOTCS ....no such
  198. CRYPT_ENG ....base f0000000, size 2MB
  199.  
  200. Marvell Development Board (LSP Version KW_LSP_4.2.7)-- RD-88F6281A Soc: MV88F6281 Rev 3 LE
  201.  
  202. Detected Tclk 200000000 and SysClk 400000000
  203. Marvell USB EHCI Host controller #0: c0a9a600
  204. PEX0 interface detected Link X1
  205. PCI: bus0: Fast back to back transfers disabled
  206. SCSI subsystem initialized
  207. usbcore: registered new interface driver usbfs
  208. usbcore: registered new interface driver hub
  209. usbcore: registered new device driver usb
  210. NET: Registered protocol family 2
  211. Time: kw_clocksource clocksource has been installed.
  212. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  213. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  214. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  215. TCP: Hash tables configured (established 8192 bind 8192)
  216. TCP reno registered
  217. RTC registered
  218. Use the XOR engines (acceleration) for enhancing the following functions:
  219. o RAID 5 Xor calculation
  220. o kernel memcpy
  221. o kenrel memzero
  222. Number of XOR engines to use: 4
  223. cesadev_init(c0011f5c)
  224. mvCesaInit: sessions=640, queue=64, pSram=f0000000
  225. Warning: TS unit is powered off.
  226. gpio_dev = fe00000
  227. LED_SET_CTL_IOC_NUM= 6702
  228. High gpio polarity = 50
  229. High gpio polarity = 70
  230. Enable Interrupt
  231. mv88f6281_wdt: Watchdog Timer timeout = 8 sec.
  232. mv88f6281_wdt: HW Watchdog timeout = 15 sec.
  233. VFS: Disk quotas dquot_6.5.1
  234. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  235. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  236. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  237. fuse init (API version 7.8)
  238. SGI XFS with large block numbers, no debug enabled
  239. SGI XFS Quota Management subsystem
  240. yaffs Feb 10 2011 21:07:53 Installing.
  241. io scheduler noop registered
  242. io scheduler cfq registered (default)
  243. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  244. serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
  245. serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
  246. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
  247. loop: module loaded
  248. Loading Marvell Ethernet Driver:
  249. o Cached descriptors in DRAM
  250. o DRAM SW cache-coherency
  251. o Single RX Queue support - ETH_DEF_RXQ=0
  252. o Single TX Queue support - ETH_DEF_TXQ=0
  253. o TCP segmentation offload enabled
  254. o Receive checksum offload enabled
  255. o Transmit checksum offload enabled
  256. o Network Fast Processing (Routing) supported
  257. o Proc tool API enabled
  258. o Rx descripors: q0=128
  259. o Tx descripors: q0=532
  260. o Loading network interface(s):
  261. eth_get_config: Unexpected port number 0
  262. EthPort #0: Bad initialization parameters
  263. eth port=0: load failed
  264. eth_init_module: can't init eth_hal driver
  265. Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
  266. Copyright (c) 1999-2006 Intel Corporation.
  267. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
  268. e100: Copyright(c) 1999-2006 Intel Corporation
  269. Integrated Sata device found
  270. scsi0 : Marvell SCSI to SATA adapter
  271. scsi1 : Marvell SCSI to SATA adapter
  272. scsi 0:0:0:0: Direct-Access WDC WD5000AAKX-221CA 15.0 PQ: 0 ANSI: 5
  273. EnablePowerSaving
  274. PowerSavingTime = 15
  275. /////////////////////////////////// init sd
  276. sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  277. sd 0:0:0:0: [sda] Write Protect is off
  278. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  279. sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  280. sd 0:0:0:0: [sda] Write Protect is off
  281. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  282. sda: sda1 sda2
  283. sd 0:0:0:0: [sda] Attached SCSI disk
  284. sd 0:0:0:0: Attached scsi generic sg0 type 0
  285. NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
  286. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  287. Scanning device for bad blocks
  288. Bad eraseblock 2 at 0x00040000
  289. Bad eraseblock 3 at 0x00060000
  290. Bad eraseblock 635 at 0x04f60000
  291. 9 cmdlinepart partitions found on MTD device nand_mtd
  292. Using command line partition definition
  293. Creating 9 MTD partitions on "nand_mtd":
  294. 0x00000000-0x00100000 : "uboot"
  295. 0x00100000-0x00180000 : "uboot_env"
  296. 0x00180000-0x00200000 : "key_store"
  297. 0x00200000-0x00280000 : "info"
  298. 0x00280000-0x00c80000 : "etc"
  299. 0x00c80000-0x01680000 : "kernel_1"
  300. 0x01680000-0x04640000 : "rootfs1"
  301. 0x04640000-0x05040000 : "kernel_2"
  302. 0x05040000-0x08000000 : "rootfs2"
  303. ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
  304. ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
  305. ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
  306. ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  307. usb usb1: configuration #1 chosen from 1 choice
  308. hub 1-0:1.0: USB hub found
  309. hub 1-0:1.0: 1 port detected
  310. USB Universal Host Controller Interface driver v3.0
  311. usb 1-1: new high speed USB device using ehci_marvell and address 2
  312. In hub_port_init, and number is 0, retry 0, port 1 .....
  313. usb 1-1: configuration #1 chosen from 1 choice
  314. hub 1-1:1.0: USB hub found
  315. hub 1-1:1.0: 4 ports detected
  316. usbcore: registered new interface driver usblp
  317. drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  318. Initializing USB Mass Storage driver...
  319. usbcore: registered new interface driver usb-storage
  320. USB Mass Storage support registered.
  321. mice: PS/2 mouse device common for all mice
  322. i2c /dev entries driver
  323. i2c-adapter i2c-0: Unrecognized version/stepping 0x69 Defaulting to Generic LM85.
  324. hwmon-vid: Unknown VRM version of your CPU
  325. md: linear personality registered for level -1
  326. md: raid0 personality registered for level 0
  327. md: raid1 personality registered for level 1
  328. raid6: int32x1 95 MB/s
  329. raid6: int32x2 138 MB/s
  330. raid6: int32x4 125 MB/s
  331. raid6: int32x8 111 MB/s
  332. raid6: using algorithm int32x2 (138 MB/s)
  333. md: raid6 personality registered for level 6
  334. md: raid5 personality registered for level 5
  335. md: raid4 personality registered for level 4
  336. raid5: measuring checksumming speed
  337. arm4regs : 1078.000 MB/sec
  338. 8regs : 653.600 MB/sec
  339. 32regs : 884.400 MB/sec
  340. raid5: using function: arm4regs (1078.000 MB/sec)
  341. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
  342. usbcore: registered new interface driver hiddev
  343. usbcore: registered new interface driver usbhid
  344. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  345. TCP cubic registered
  346. NET: Registered protocol family 1
  347. NET: Registered protocol family 17
  348. Freeing init memory: 3116K
  349. *** Stage 1: Setup system and device drivers ***
  350. r8168 Gigabit Ethernet driver 8.012.00-NAPI loaded
  351. pci_resource_start(pdev, 2) = e8014000
  352. r8168 0000:00:01.0: no MSI. Back to INTx.
  353. Set LED ...
  354. r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
  355. eth0: RTL8168B/8111B at 0xd0854000, 00:00:00:00:00:30, IRQ 9
  356. ioaddr = d0854000
  357. r8168 Copyright (C) 2009 Realtek NIC software team <nicfae@realtek.com>
  358. This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  359. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  360. r8168: egiga0: link down
  361. *** Stage 2: Prepare the root file system ***
  362. Mount system partition...
  363. yaffs: dev is 32505862 name is "mtdblock6"
  364. yaffs: passed flags ""
  365. yaffs: Attempting MTD mount on 31.6, "mtdblock6"
  366. yaffs_read_super: isCheckpointed 0
  367. e2fsck 1.38 (30-Jun-2005)
  368. /dev/sda1: clean, 13/128520 files, 156045/514048 blocks
  369. kjournald starting. Commit interval 5 seconds
  370. EXT3-fs: mounted filesystem with ordered data mode.
  371. kjournald starting. Commit interval 5 seconds
  372. EXT3-fs: mounted filesystem with ordered data mode.
  373. /dev/sda1 /zyxel/mnt/sysdisk ext3 ro,data=ordered 0 0
  374. 0
  375. Boot from disk
  376. r8168: egiga0: link up
  377. r8168: egiga0: link up
  378. Checksum of sysdisk.img : e958d7565884c86ec4e86ce67826490b
  379. Checksum from INFO : 7ddf39bd27e18147c31a7d325e5acc98
  380. Checksum pass!
  381. EXT3 FS on sda1, internal journal
  382. Mount system disk image ...
  383. cp: /ram_bin/bin/*: No such file or directory
  384. yaffs: dev is 32505860 name is "mtdblock4"
  385. yaffs: passed flags ""
  386. yaffs: Attempting MTD mount on 31.4, "mtdblock4"
  387. yaffs_read_super: isCheckpointed 0
  388. /etc/zyxel/conf exist..
  389. tar: Couldnt chdir to /etc/init.d/service_conf/: No such file or directory
  390. Start rcS2 of ZyXEL style
  391. *** Stage 3: Start services on HDD ***
  392. NTFS driver 2.1.28 [Flags: R/O MODULE].
  393. tntfs: module license 'Commercial' taints kernel.
  394. Tuxera NTFS driver 3010.6.16 [Flags: R/W MODULE].
  395. PPP generic driver version 2.4.2
  396. PPP MPPE Compression module registered
  397. ppp_async: Unknown symbol crc_ccitt_table
  398. insmod: cannot insert `/lib/modules/2.6.22.18/kernel/drivers/net/ppp_async.ko': Unknown symbol in module (-1): No such file or directory
  399. PPP Deflate Compression module registered
  400. NET: Registered protocol family 24
  401. PPP BSD Compression module registered
  402. modprobe: module fuse not found.
  403. modprobe: failed to load module fuse
  404. Starting PID Fan Control..
  405. P:20, I:1, D:5, SampleRate:10 seconds, ST_CPU:46, ST_ADT7463:46, ST_DauBoard:46
  406. Wt_CPU:0, Wt_ADT7463:0, Wt_DauBoard:1
  407. Tolerance:1 MinPwm:0x40
  408.  
  409. sda
  410. checking sda
  411. Trying to mount /dev/sda1
  412. Press ENTER to continue...
  413. Starting zylogd...
  414. zylog starts.
  415. Starting uamd...
  416. Starting ZySH daemon and client...
  417. Start NSA-220 system daemon....
  418. Start ZySH daemon
  419. zyshd: version 2.0.0 (build: 11:39:50 Aug 19 2010)
  420. % zylog init start
  421. cat: /var/run/syslog-ng.pid: No such file or directory
  422. Try to KILL SIGHUP to syslog-ng: pid=0
  423. syslog-ng not running, start /usr/sbin/syslog-ng
  424. Nov 29 21:32:49 (none) syslog-ng[1154]: syslog-ng starting up; version='2.0.10'
  425. zyio_open_config success. (/etc/__system_default.xml, 0)
  426. zyio_open_config success. (/etc/zyxel/conf/__system_default_device_ha.xml, 0)
  427. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  428. /bin/ln -s -f /etc/MyZone /etc/localtime
  429. /bin/hostname HomeDisk
  430. Usage: umount [-hV]
  431. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  432. umount [-f] [-F] [-r] [-n] [-v] special | node...
  433. Usage: umount [-hV]
  434. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  435. umount [-f] [-F] [-r] [-n] [-v] special | node...
  436. BusyBox v1.1.1 (2011.01.26-03:51+0000) multi-call binary
  437.  
  438. Usage: rmdir [OPTION]... DIRECTORY...
  439.  
  440. Init SMB DB access...
  441. rm: cannot remove `/var/log/samba/smb.db': No such file or directory
  442. zyio_container_create_template(/etc/__system_default.xml): scope:[network/wlan] list:[wlan_list] type:[wlan_t] is not existed
  443. Assemble volume....
  444. [1196] server write-only FIFO is opened (fd=6)
  445. [1196] server read-only FIFO is opened (fd=7)
  446. [1196] server error read-only FIFO is opened (fd=8)
  447. argc = 1, func = 276
  448. md: md0 stopped.
  449. md: bind<sda2>
  450. cat: /tmp/mduuid.map: No such file or directory
  451. Filesystem "md0": Disabling barriers, not supported by the underlying device
  452. XFS mounting filesystem md0
  453. Starting XFS recovery on filesystem: md0 (logdev: internal)
  454. Ending XFS recovery on filesystem: md0 (logdev: internal)
  455. Startup config
  456. POLLHUP on 7
  457. pid = 1196
  458. [1196] is disconnected
  459. [1261] server write-only FIFO is opened (fd=6)
  460. [1261] server read-only FIFO is opened (fd=7)
  461. [1261] server error read-only FIFO is opened (fd=8)
  462. argc = 1, func = 14
  463. argc = 1, func = 17
  464. argc = 1, func = 638
  465. argc = 2, func = 104
  466. argid[1]: 1059; argv[1]: ge1
  467. argc = 6, func = 108
  468. argid[1]: 1059; argv[1]: ge1
  469. argid[2]: 313; argv[2]: ip
  470. argid[3]: 434; argv[3]: address
  471. argid[4]: 1052; argv[4]: 192.168.1.5
  472. argid[5]: 1052; argv[5]: 255.255.255.0
  473. argc = 5, func = 109
  474. argid[1]: 1059; argv[1]: ge1
  475. argid[2]: 313; argv[2]: ip
  476. argid[3]: 542; argv[3]: gateway
  477. argid[4]: 1052; argv[4]: 192.168.1.1
  478. argc = 4, func = 106
  479. argid[1]: 1059; argv[1]: ge1
  480. argid[2]: 540; argv[2]: mtu
  481. argid[3]: 1375; argv[3]: 1500
  482. argc = 3, func = 105
  483. argid[1]: 1059; argv[1]: ge1
  484. argid[2]: 350; argv[2]: exit
  485. argc = 2, func = 418
  486. argid[1]: 1052; argv[1]: 192.168.1.1
  487. argc = 4, func = 420
  488. argid[1]: 857; argv[1]: fetch
  489. argid[2]: 858; argv[2]: manually
  490. argid[3]: 1059; argv[3]: ge1
  491. /bin/rm -f /var/zyxel/zysh/egiga0.metric
  492. argc = 7, func = 77
  493. argid[1]: 267; argv[1]: mail
  494. argid[2]: 1368; argv[2]: 1
  495. argid[3]: 435; argv[3]: category
  496. argid[4]: 375; argv[4]: all
  497. argid[5]: 461; argv[5]: level
  498. argid[6]: 478; argv[6]: alert
  499. mail server '1' log_category(all) is:alert
  500. argc = 7, func = 77
  501. argid[1]: 267; argv[1]: mail
  502. argid[2]: 1368; argv[2]: 1
  503. argid[3]: 435; argv[3]: category
  504. argid[4]: 375; argv[4]: all
  505. argid[5]: 461; argv[5]: level
  506. argid[6]: 375; argv[6]: all
  507. mail server '1' log_category(all) is:all
  508. argc = 2, func = 68
  509. argid[1]: 1051; argv[1]: ntp1.tele.dk
  510. argc = 2, func = 60
  511. argid[1]: 1102; argv[1]: +0100
  512. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  513. /bin/ln -s -f /etc/MyZone /etc/localtime
  514. killall: crond: no process killed
  515. killall: timer_source: no process killed
  516. killall: schedule_controller: no process killed
  517. killall: timer_source: no process killed
  518. ===> Stopping crond ...
  519. ===> Starting crond ...
  520. ===> Stopping schedule_controller ...
  521. ===> Starting schedule_controller ...
  522. argc = 1, func = 72
  523. /usr/sbin/ntpdate_agent ntp1.tele.dk
  524. argc = 4, func = 340
  525. argid[1]: 1195; argv[1]: "CET"
  526. argid[2]: 592; argv[2]: in
  527. argid[3]: 1196; argv[3]: "Brussels,Copenhagen,Madrid,Paris"
  528. argc = 2, func = 192
  529. argid[1]: 1112; argv[1]: "admin"
  530. argc = 5, func = 193
  531. argid[1]: 1112; argv[1]: "admin"
  532. argid[2]: 1379; argv[2]: 501
  533. argid[3]: 363; argv[3]: password
  534. argid[4]: 1135; argv[4]: B0C6223DE05819139C5014AE4718A7EE:3F0646CDA37BF8D9478FFBC1B1B3CFA1
  535. enter smb_db_update_user
  536. argc = 5, func = 193
  537. argid[1]: 1112; argv[1]: "admin"
  538. argid[2]: 1379; argv[2]: 501
  539. argid[3]: 632; argv[3]: type
  540. argid[4]: 633; argv[4]: admin
  541. enter smb_db_update_user
  542. argc = 5, func = 194
  543. argid[1]: 1112; argv[1]: "admin"
  544. argid[2]: 1379; argv[2]: 501
  545. argid[3]: 637; argv[3]: shpass
  546. argid[4]: 1138; argv[4]: $1$$4jBn1hWDvUshaaDgZcEgs/
  547. shpass : $1$$4jBn1hWDvUshaaDgZcEgs/
  548. argc = 4, func = 189
  549. argid[1]: 1112; argv[1]: "admin"
  550. argid[2]: 1379; argv[2]: 501
  551. argid[3]: 350; argv[3]: exit
  552. argc = 6, func = 174
  553. argid[1]: 456; argv[1]: share
  554. argid[2]: 625; argv[2]: save
  555. argid[3]: 1140; argv[3]: "HomeDisk"
  556. argid[4]: 395; argv[4]: path
  557. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  558. argc = 7, func = 175
  559. argid[1]: 456; argv[1]: share
  560. argid[2]: 625; argv[2]: save
  561. argid[3]: 1140; argv[3]: "HomeDisk"
  562. argid[4]: 395; argv[4]: path
  563. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  564. argid[6]: 611; argv[6]: media-server
  565. argc = 7, func = 163
  566. argid[1]: 456; argv[1]: share
  567. argid[2]: 625; argv[2]: save
  568. argid[3]: 1140; argv[3]: "HomeDisk"
  569. argid[4]: 395; argv[4]: path
  570. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  571. argid[6]: 350; argv[6]: exit
  572. smb_share.c: editing_config lack of smb_global settings
  573. RegenSmbConfigFile:2114 Close file ok
  574. argc = 6, func = 174
  575. argid[1]: 456; argv[1]: share
  576. argid[2]: 625; argv[2]: save
  577. argid[3]: 1140; argv[3]: "admin"
  578. argid[4]: 395; argv[4]: path
  579. argid[5]: 1142; argv[5]: "/i-data/md0/admin"
  580. argc = 7, func = 163
  581. argid[1]: 456; argv[1]: share
  582. argid[2]: 625; argv[2]: save
  583. argid[3]: 1140; argv[3]: "admin"
  584. argid[4]: 395; argv[4]: path
  585. argid[5]: 1142; argv[5]: "/i-data/md0/admin"
  586. argid[6]: 350; argv[6]: exit
  587. smb_share.c: editing_config lack of smb_global settings
  588. RegenSmbConfigFile:2114 Close file ok
  589. argc = 2, func = 395
  590. argid[1]: 1209; argv[1]: default
  591. Nov 29 22:33:01 (none) ntpdate[1349]: step time server 193.162.159.194 offset 1.271319 sec
  592. argc = 2, func = 392
  593. argid[1]: 1216; argv[1]: yes
  594. argc = 1, func = 507
  595. Nov 29 22:33:07 (none) mt-daapd[1436]: Starting rendezvous daemon
  596. Nov 29 22:33:07 (none) mt-daapd[1440]: Starting signal handler
  597. Nov 29 22:33:08 (none) mt-daapd[1440]: Loading playlists
  598. Nov 29 22:33:08 (none) mt-daapd[1440]: Initializing database
  599. Nov 29 22:33:08 (none) mt-daapd[1440]: Starting mp3 scan
  600. Nov 29 22:33:08 (none) mt-daapd[1440]: Starting web server from /usr/local/apache/htdocs/zyxel on port 3689
  601. Nov 29 22:33:08 (none) mt-daapd[1440]: Registering rendezvous names
  602. Nov 29 22:33:08 (none) mt-daapd[1440]: Scanned 0 songs in 1 seconds
  603. Starting iTune SDisablePowerSaving
  604. erver:
  605. CheckTimerState = 1
  606. /i-data/md0/.zyEnablePowerSaving
  607. xel existing: /iPowerSavingTime = 15
  608. -data/md0/.zyxel exist
  609. iTunes starting OK
  610. iTunes monitor starting ok
  611. Successfully starting iTunes server!
  612. argc = 2, func = 146
  613. argid[1]: 1127; argv[1]: 15
  614. test0
  615. Test1
  616. Test2
  617. Test3:
  618. argc = 5, func = 168
  619. argid[1]: 456; argv[1]: share
  620. argid[2]: 614; argv[2]: recycle-bin
  621. argid[3]: 619; argv[3]: expireday
  622. argid[4]: 1378; argv[4]: 45
  623. argc = 2, func = 160
  624. argid[1]: 1132; argv[1]: d
  625. Error: Read failed
  626. exec_cmd complete
  627. eth status = d
  628. ethtest0
  629. Test1
  630. Test2
  631. Test3:
  632. argc = 2, func = 502
  633. argid[1]: 905; argv[1]: activate
  634. /bin/killall -USR1 app_wd
  635. killall: app_wd: no process killed
  636. argc = 2, func = 18
  637. argid[1]: 350; argv[1]: exit
  638. argc = 1, func = 20
  639. POLLHUP on 7
  640. pid = 1261
  641. [1261] is disconnected
  642. configure terminal ip smb internal enable "/i-data/md0"
  643. [1477] server write-only FIFO is opened (fd=6)
  644. [1477] server read-only FIFO is opened (fd=7)
  645. [1477] server error read-only FIFO is opened (fd=8)
  646. argc = 4, func = 180
  647. argid[1]: 629; argv[1]: internal
  648. argid[2]: 302; argv[2]: enable
  649. argid[3]: 1154; argv[3]: "/i-data/md0"
  650. smb_share.c: editing_config lack of smb_global settings
  651. RegenSmbConfigFile:2114 Close file ok
  652. [1477] is disconnected
  653. Starting smbd...
  654. Starting nmbd...
  655. Starting NSU Agent...
  656. readlink: /i-data/md1: No such file or directory
  657. configure terminal ip smb internal disable "/i-data/md1"
  658. [1505] server write-only FIFO is opened (fd=6)
  659. [1505] server read-only FIFO is opened (fd=7)
  660. [1505] server error read-only FIFO is opened (fd=8)
  661. argc = 4, func = 181
  662. argid[1]: 629; argv[1]: internal
  663. argid[2]: 303; argv[2]: disable
  664. argid[3]: 1154; argv[3]: "/i-data/md1"
  665. smb_share.c: editing_config lack of smb_global settings
  666. RegenSmbConfigFile:2114 Close file ok
  667. POLLHUP on 7
  668. pid = 1505
  669. [1505] is disconnected
  670. configure terminal ip smb internal enable "/i-data/f897e6ca"
  671. [1514] server write-only FIFO is opened (fd=6)
  672. [1514] server read-only FIFO is opened (fd=7)
  673. [1514] server error read-only FIFO is opened (fd=8)
  674. argc = 4, func = 180
  675. argid[1]: 629; argv[1]: internal
  676. argid[2]: 302; argv[2]: enable
  677. argid[3]: 1154; argv[3]: "/i-data/f897e6ca"
  678. smb_share.c: editing_config lack of smb_global settings
  679. RegenSmbConfigFile:2114 Close file ok
  680. POLLHUP on 7
  681. pid = 1514
  682. [1514] is disconnected
  683. Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-1 extents:3 across:244099264k
  684. 341+0 records in
  685. 341+0 records out
  686. Setting up swapspace version 1, size = 357560 kB
  687. GMT offset=3600s
  688. setting system time zone to tz_minuteswest=-60
  689. mknod: /dev/btncpy: File exists
  690. setLED COPY OFF
  691. [1756] server write-only FIFO is opened (fd=6)
  692. [1756] server read-only FIFO is opened (fd=7)
  693. [1756] server error read-only FIFO is opened (fd=8)
  694. argc = 1, func = 19
  695. POLLHUP on 7
  696. pid = 1756
  697. [1756] is disconnected
  698. led_state_map_addr = 10
  699. [1827] server write-only FIFO is opened (fd=6)
  700. [1827] server read-only FIFO is opened (fd=7)
  701. [1827] server error read-only FIFO is opened (fd=8)
  702. argc = 2, func = 345
  703. argid[1]: 1197; argv[1]: former
  704. Fail to enable power resume
  705. POLLHUP on 7
  706. pid = 1827
  707. [1827] is disconnected
  708. schedule_controller is already running now.
  709. Starting "/etc/init.d/zypkg_controller.sh".
  710. Starting to set up zy-pkgs environment ...
  711. cp: /etc/zyxel/zy-pkgs/*: No such file or directory
  712. du: /usr/local/zy-pkgs/tmp/zypkg.log: No such file or directory
  713. [: 10240: unknown operand
  714. Finish "/etc/init.d/zypkg_controller.sh".
  715. Starting "/etc/init.d/zypkg_controller.sh".
  716. Starting all zypkgs via "/etc/init.d/zypkg_controller.sh" ...
  717. - starting package "PHP-MySQL-phpMyAdmin" ...
  718. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/PHP-MySQL-phpMyAdmin" is not existed or not excutable
  719. - starting package "SqueezeCenter" ...
  720. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SqueezeCenter" is not existed or not excutable
  721. - starting package "SMART" ...
  722. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SMART" is not existed or not excutable
  723. /etc/init.d/zypkg_controller.sh: /etc/init.d/zypkg_controller.sh: 491: cannot open /i-data/md0/admin/zy-pkgs/USRPKG_DEPS_START: No such file
  724. Finish "/etc/init.d/zypkg_controller.sh".
  725. Starting Web Server...
  726. Nov 29 22:33:29 (none) httpd[2019]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
  727. Nov 29 22:33:29 (none) httpd[2019]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  728. Nov 29 22:33:29 (none) httpd[2019]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  729. Nov 29 22:33:29 (none) httpd[2019]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  730. Nov 29 22:33:29 (none) httpd[2019]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  731. Nov 29 22:33:29 (none) httpd[2019]: [error] mod_auth_zyxel: initialized.
  732. Nov 29 22:33:30 (none) httpd[2021]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  733. Nov 29 22:33:30 (none) httpd[2021]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  734. Nov 29 22:33:30 (none) httpd[2021]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  735. Nov 29 22:33:30 (none) httpd[2021]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  736. Nov 29 22:33:30 (none) httpd[2021]: [error] mod_auth_zyxel: initialized.
  737. Starting app_wd...
  738.  core_checksum : 60e5ac84547193df98917040f063855e
  739.  fwversion : V3.34(AFN.2)
  740.  img_checksum : 7ddf39bd27e18147c31a7d325e5acc98
  741.  modelid : DA01
  742.  revision : 29152
  743.  romfile_checksum : 1A7D
  744.  zld_checksum : 72ff7c00ebca9f21c3129d854d47cdb7
  745. led_state_map_addr = 46
  746. Nov 29 21:33:31 (none) linuxrc: Starting pid 207
  747. HomeDisk login: Nov 29 22:33:42 (none) httpd[2163]: [error] [client 192.168.1.100] File does not exist: /usr/local/apache/htdocs/zyxel/cgi-bin, referer: http://192.168.1.5/zyxel/loginwrap.html
  748.  
  749.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!