Advertisement
Guest User

bav335x u-boot 2015.01

a guest
Mar 17th, 2015
277
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.29 KB | None | 0 0
  1. U-Boot SPL 2015.01-00001-gc6bb4d2 (Mar 16 2015 - 20:18:33)
  2. ### Board doesn't have a serial-EE
  3. ### Selecting BAV335B as per config
  4. reading args
  5. spl_load_image_fat_os: error reading image args, err - -1
  6. reading u-boot.img
  7. reading u-boot.img
  8.  
  9.  
  10. U-Boot 2015.01-00001-gc6bb4d2 (Mar 16 2015 - 20:18:33)
  11.  
  12. Watchdog enabled
  13. I2C: ready
  14. DRAM: 512 MiB
  15. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  16. Using default environment
  17.  
  18. Net: <ethaddr> not set. Validating first E-fuse MAC
  19. cpsw
  20. Hit any key to stop autoboot: 0
  21. gpio: pin 53 (gpio 53) value is 1
  22. switch to partitions #0, OK
  23. mmc0 is current device
  24. gpio: pin 54 (gpio 54) value is 1
  25. Checking for: /uEnv.txt ...
  26. reading uEnv.txt
  27. 2468 bytes read in 5 ms (481.4 KiB/s)
  28. gpio: pin 55 (gpio 55) value is 1
  29. Loaded environment from uEnv.txt
  30. Importing environment from mmc ...
  31. Checking if uenvcmd is set ...
  32. gpio: pin 56 (gpio 56) value is 1
  33. Running uenvcmd ...
  34. Loading image from mmc...
  35. reading zImage
  36. 6828832 bytes read in 382 ms (17 MiB/s)
  37. Loadng DT from mmc...
  38. reading /dtbs/birdland-bav335b.dtb
  39. 31449 bytes read in 10 ms (3 MiB/s)
  40. Kernel image @ 0x82000000 [ 0x000000 - 0x683320 ]
  41. ## Flattened Device Tree blob at 88000000
  42. Booting using the fdt blob at 0x88000000
  43. Using Device Tree in place at 88000000, end 8800aad8
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0
  48. [ 0.000000] Initializing cgroup subsys cpuset
  49. [ 0.000000] Initializing cgroup subsys cpu
  50. [ 0.000000] Initializing cgroup subsys cpuacct
  51. [ 0.000000] Linux version 3.18.1-bone1 (gilles@bbdev) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Li5
  52. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  53. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  54. [ 0.000000] Machine model: Birdland BAV335B Network Processor
  55. [ 0.000000] cma: Reserved 16 MiB at 0x9e800000
  56. [ 0.000000] Memory policy: Data cache writeback
  57. [ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0
  58. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  59. [ 0.000000] AM335X ES1.0 (sgx neon )
  60. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  61. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc capemgr.disable_partno=BB-BO0
  62. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  63. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. [ 0.000000] allocated 1046528 bytes of page_cgroup
  66. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  67. [ 0.000000] Memory: 489480K/523264K available (6162K kernel code, 702K rwdata, 3404K rodata, 472K init, 863K bss, 33784K reserved, 0K highm)
  68. [ 0.000000] Virtual kernel memory layout:
  69. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  70. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  71. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  72. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  73. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  74. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  75. [ 0.000000] .text : 0xc0008000 - 0xc095fae8 (9567 kB)
  76. [ 0.000000] .init : 0xc0960000 - 0xc09d6000 ( 472 kB)
  77. [ 0.000000] .data : 0xc09d6000 - 0xc0a85b50 ( 703 kB)
  78. [ 0.000000] .bss : 0xc0a85b50 - 0xc0b5d76c ( 864 kB)
  79. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  80. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  81. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  82. [ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  83. [ 0.000028] OMAP clocksource: timer1 at 24000000 Hz
  84. [ 0.000253] Console: colour dummy device 80x30
  85. [ 0.000280] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  86. [ 0.089416] pid_max: default: 32768 minimum: 301
  87. [ 0.089526] Security Framework initialized
  88. [ 0.089599] AppArmor: AppArmor disabled by boot time parameter
  89. [ 0.089606] Yama: becoming mindful.
  90. [ 0.089786] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  91. [ 0.089797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  92. [ 0.090390] Initializing cgroup subsys memory
  93. [ 0.090424] Initializing cgroup subsys devices
  94. [ 0.090439] Initializing cgroup subsys freezer
  95. [ 0.090453] Initializing cgroup subsys net_cls
  96. [ 0.090470] Initializing cgroup subsys blkio
  97. [ 0.090483] Initializing cgroup subsys perf_event
  98. [ 0.090494] Initializing cgroup subsys net_prio
  99. [ 0.090545] CPU: Testing write buffer coherency: ok
  100. [ 0.090588] ftrace: allocating 31390 entries in 62 pages
  101. [ 0.156598] Setting up static identity map for 0x805cbfe8 - 0x805cc034
  102. [ 0.163136] devtmpfs: initialized
  103. [ 0.164077] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  104. [ 0.170282] omap_hwmod: tptc0 using broken dt data from edma
  105. [ 0.170355] omap_hwmod: tptc1 using broken dt data from edma
  106. [ 0.170417] omap_hwmod: tptc2 using broken dt data from edma
  107. [ 0.174385] omap_hwmod: debugss: _wait_target_disable failed
  108. [ 0.235349] xor: measuring software checksum speed
  109. [ 0.329387] arm4regs : 1245.600 MB/sec
  110. [ 0.429385] 8regs : 945.600 MB/sec
  111. [ 0.529384] 32regs : 1112.400 MB/sec
  112. [ 0.629383] neon : 1821.600 MB/sec
  113. [ 0.629389] xor: using function: neon (1821.600 MB/sec)
  114. [ 0.629445] pinctrl core: initialized pinctrl subsystem
  115. [ 0.629830] regulator-dummy: no parameters
  116. [ 0.636981] NET: Registered protocol family 16
  117. [ 0.638850] DMA: preallocated 256 KiB pool for atomic coherent allocations
  118. [ 0.639879] cpuidle: using governor ladder
  119. [ 0.639898] cpuidle: using governor menu
  120. [ 0.642426] OMAP GPIO hardware version 0.1
  121. [ 0.648400] No ATAGs?
  122. [ 0.648423] hw-breakpoint: debug architecture 0x4 unsupported.
  123. [ 0.819440] raid6: int32x1 240 MB/s
  124. [ 0.989418] raid6: int32x2 365 MB/s
  125. [ 1.159514] raid6: int32x4 395 MB/s
  126. [ 1.329509] raid6: int32x8 320 MB/s
  127. [ 1.499407] raid6: neonx1 1449 MB/s
  128. [ 1.669385] raid6: neonx2 1858 MB/s
  129. [ 1.839406] raid6: neonx4 2023 MB/s
  130. [ 2.009425] raid6: neonx8 720 MB/s
  131. [ 2.009431] raid6: using algorithm neonx4 (2023 MB/s)
  132. [ 2.009436] raid6: using intx1 recovery algorithm
  133. [ 2.016186] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  134. [ 2.016733] vbat: 5000 mV
  135. [ 2.016956] vmmcsd_fixed: 3300 mV
  136. [ 2.018927] SCSI subsystem initialized
  137. [ 2.019538] usbcore: registered new interface driver usbfs
  138. [ 2.019600] usbcore: registered new interface driver hub
  139. [ 2.019667] usbcore: registered new device driver usb
  140. [ 2.020057] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
  141. [ 2.020077] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
  142. [ 2.020102] omap_i2c 4819c000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c2_pins, deferring probe
  143. [ 2.020113] platform 4819c000.i2c: Driver omap_i2c requests probe deferral
  144. [ 2.020191] media: Linux media interface: v0.10
  145. [ 2.020243] Linux video capture interface: v2.00
  146. [ 2.020328] pps_core: LinuxPPS API ver. 1 registered
  147. [ 2.020335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  148. [ 2.020360] PTP clock support registered
  149. [ 2.020937] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  150. [ 2.022020] NetLabel: Initializing
  151. [ 2.022032] NetLabel: domain hash size = 128
  152. [ 2.022037] NetLabel: protocols = UNLABELED CIPSOv4
  153. [ 2.022085] NetLabel: unlabeled traffic allowed by default
  154. [ 2.022576] Switched to clocksource timer1
  155. [ 2.076817] NET: Registered protocol family 2
  156. [ 2.077502] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  157. [ 2.077549] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  158. [ 2.077586] TCP: Hash tables configured (established 4096 bind 4096)
  159. [ 2.077643] TCP: reno registered
  160. [ 2.077652] UDP hash table entries: 256 (order: 0, 4096 bytes)
  161. [ 2.077667] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  162. [ 2.077838] NET: Registered protocol family 1
  163. [ 2.078191] RPC: Registered named UNIX socket transport module.
  164. [ 2.078201] RPC: Registered udp transport module.
  165. [ 2.078206] RPC: Registered tcp transport module.
  166. [ 2.078211] RPC: Registered tcp NFSv4.1 backchannel transport module.
  167. [ 2.079001] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  168. [ 2.080739] futex hash table entries: 256 (order: -1, 3072 bytes)
  169. [ 2.080834] audit: initializing netlink subsys (disabled)
  170. [ 2.080893] audit: type=2000 audit(2.030:1): initialized
  171. [ 2.082028] zpool: loaded
  172. [ 2.082044] zbud: loaded
  173. [ 2.082298] VFS: Disk quotas dquot_6.5.2
  174. [ 2.082355] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  175. [ 2.082971] NFS: Registering the id_resolver key type
  176. [ 2.083023] Key type id_resolver registered
  177. [ 2.083029] Key type id_legacy registered
  178. [ 2.083050] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  179. [ 2.083305] fuse init (API version 7.23)
  180. [ 2.083486] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  181. [ 2.084019] msgmni has been set to 988
  182. [ 2.084965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  183. [ 2.085102] io scheduler noop registered
  184. [ 2.085114] io scheduler deadline registered
  185. [ 2.085157] io scheduler cfq registered (default)
  186. [ 2.086101] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  187. [ 2.088152] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  188. [ 2.089806] omap_uart 44e09000.serial: no wakeirq for uart0
  189. [ 2.089973] omap_uart 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0
  190. [ 2.912606] console [ttyO0] enabled
  191. [ 2.917596] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  192. [ 2.924773] [drm] Initialized drm 1.1.0 20060810
  193. [ 2.929695] usbcore: registered new interface driver udl
  194. [ 2.935298] Error: Driver 'tfp410' is already registered, aborting...
  195. [ 2.944580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  196. [ 2.951444] ehci-platform: EHCI generic platform driver
  197. [ 2.957088] ehci-omap: OMAP-EHCI Host Controller driver
  198. [ 2.962741] usbcore: registered new interface driver usb-storage
  199. [ 2.970323] 47401300.usb-phy supply vcc not found, using dummy regulator
  200. [ 2.980172] 47401b00.usb-phy supply vcc not found, using dummy regulator
  201. [ 2.989215] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  202. [ 2.995509] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  203. [ 3.003897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  204. [ 3.011019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  205. [ 3.018609] usb usb1: Product: MUSB HDRC host driver
  206. [ 3.023822] usb usb1: Manufacturer: Linux 3.18.1-bone1 musb-hcd
  207. [ 3.030029] usb usb1: SerialNumber: musb-hdrc.1.auto
  208. [ 3.035807] hub 1-0:1.0: USB hub found
  209. [ 3.039768] hub 1-0:1.0: 1 port detected
  210. [ 3.051295] mousedev: PS/2 mouse device common for all mice
  211. [ 3.058450] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  212. [ 3.066247] i2c /dev entries driver
  213. [ 3.070023] IR XMP protocol handler initialized
  214. [ 3.075987] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  215. [ 3.083554] sdhci: Secure Digital Host Controller Interface driver
  216. [ 3.090034] sdhci: Copyright(c) Pierre Ossman
  217. [ 3.172781] sdhci-pltfm: SDHCI platform and OF driver helper
  218. [ 3.179593] ledtrig-cpu: registered to indicate activity on CPUs
  219. [ 3.186083] hidraw: raw HID events driver (C) Jiri Kosina
  220. [ 3.192736] usbcore: registered new interface driver usbhid
  221. [ 3.198589] usbhid: USB HID core driver
  222. [ 3.203127] ashmem: initialized
  223. [ 3.207684] oprofile: using arm/armv7
  224. [ 3.211851] TCP: cubic registered
  225. [ 3.215504] NET: Registered protocol family 10
  226. [ 3.221018] mip6: Mobile IPv6
  227. [ 3.224225] mmc0: host does not support reading read-only switch, assuming write-enable
  228. [ 3.232656] NET: Registered protocol family 17
  229. [ 3.237412] Key type dns_resolver registered
  230. [ 3.241894] mpls_gso: MPLS GSO support
  231. [ 3.246133] omap_voltage_late_init: Voltage driver support not added
  232. [ 3.252895] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize
  233. [ 3.261399] mmc0: new high speed SDHC card at address aaaa
  234. [ 3.267166] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize
  235. [ 3.276104] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral
  236. [ 3.284025] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
  237. [ 3.289071] ThumbEE CPU extension supported.
  238. [ 3.293985] Registering SWP/SWPB emulation handler
  239. [ 3.299118] mmcblk0: p1 p2 p3
  240. [ 3.302444] SmartReflex Class3 initialized
  241. [ 3.308341] registered taskstats version 1
  242. [ 3.314534] Btrfs loaded
  243. [ 3.321947] vdds_dpr: at 1500 mV
  244. [ 3.326381] vdd_mpu: 925 <--> 1325 mV at 1325 mV
  245. [ 3.333203] vdd_core: 925 <--> 1150 mV at 1125 mV
  246. [ 3.341005] vio,vrtc,vdds: at 1800 mV
  247. [ 3.345701] vdd_3v3aux: at 3300 mV
  248. [ 3.350116] vdd_1v8: 1800 mV
  249. [ 3.354044] vdd_3v3a: at 3300 mV
  250. [ 3.358329] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  251. [ 3.364465] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  252. [ 3.371703] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  253. [ 3.378933] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  254. [ 3.386565] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  255. [ 3.394190] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  256. [ 3.401728] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  257. [ 3.409031] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  258. [ 3.472604] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  259. [ 3.479015] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  260. [ 3.486583] libphy: 4a101000.mdio: probed
  261. [ 3.490799] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown
  262. [ 3.499864] cpsw 4a100000.ethernet: Detected MACID = 00:20:18:1c:00:01
  263. [ 3.507850] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  264. [ 3.516930] sr_init: No PMIC hook to init smartreflex
  265. [ 3.522380] sr_init: platform driver register failed for SR
  266. [ 3.531415] vbat: disabling
  267. [ 3.537077] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  268. [ 3.544808] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  269. [ 3.552311] mmc1: BKOPS_EN bit is not set
  270. [ 3.560317] mmc1: new high speed MMC card at address 0001
  271. [ 3.566914] mmcblk1: mmc1:0001 MMC04G 3.52 GiB
  272. [ 3.571837] mmcblk1boot0: mmc1:0001 MMC04G partition 1 16.0 MiB
  273. [ 3.578428] mmcblk1boot1: mmc1:0001 MMC04G partition 2 16.0 MiB
  274. [ 3.587116] mmcblk1: unknown partition table
  275. [ 3.603776] EXT4-fs (mmcblk0p2): recovery complete
  276. [ 3.614703] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  277. [ 3.623262] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  278. [ 3.631577] devtmpfs: mounted
  279. [ 3.635172] Freeing unused kernel memory: 472K (c0960000 - c09d6000)
  280. [ 3.814704] random: systemd urandom read with 14 bits of entropy available
  281. [ 3.830343] systemd[1]: systemd 216 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT -LIBCRYPTSETUP -GCRYPT -G)
  282. [ 3.849164] systemd[1]: Detected architecture 'arm'.
  283.  
  284. Welcome to Buildroot 2014.08-rc1!
  285.  
  286. [ 3.874153] systemd[1]: Set hostname to <bav335x>.
  287. [ 3.883087] systemd[1]: Initializing machine ID from random generator.
  288. [ 3.890190] systemd[1]: Installed transient /etc/machine-id file.
  289. [ 4.125112] systemd[1]: [/etc/systemd/system/avahi-daemon.service:8] Failed to parse boolean value, ignoring: ye
  290. [ 4.135964] systemd[1]: [/etc/systemd/system/avahi-daemon.service:12] Failed to parse service restart specifier, ignoring: restart-always
  291. [ 4.164899] systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit dbus.target failed to load: No such file or.
  292. [ 4.181501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  293. [ 4.190017] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  294. [ 4.198114] systemd[1]: Expecting device dev-ttyO0.device...
  295. Expecting device dev-ttyO0.device...
  296. [ 4.222764] systemd[1]: Starting Remote File Systems.
  297. [ OK ] Reached target Remote File Systems.
  298. [ 4.242699] systemd[1]: Reached target Remote File Systems.
  299. [ 4.248741] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  300. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  301. [ 4.282722] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  302. [ 4.292785] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  303. [ 4.301408] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  304. [ 4.309826] systemd[1]: Starting Paths.
  305. [ OK ] Reached target Paths.
  306. [ 4.332698] systemd[1]: Reached target Paths.
  307. [ 4.337354] systemd[1]: Starting Swap.
  308. [ OK ] Reached target Swap.
  309. [ 4.352686] systemd[1]: Reached target Swap.
  310. [ 4.357249] systemd[1]: Starting Root Slice.
  311. [ OK ] Created slice Root Slice.
  312. [ 4.402772] systemd[1]: Created slice Root Slice.
  313. [ 4.407850] systemd[1]: Starting User and Session Slice.
  314. [ OK ] Created slice User and Session Slice.
  315. [ 4.432742] systemd[1]: Created slice User and Session Slice.
  316. [ 4.438888] systemd[1]: Starting Delayed Shutdown Socket.
  317. [ OK ] Listening on Delayed Shutdown Socket.
  318. [ 4.462708] systemd[1]: Listening on Delayed Shutdown Socket.
  319. [ 4.468833] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  320. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  321. [ 4.492696] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  322. [ 4.500084] systemd[1]: Starting Journal Socket (/dev/log).
  323. [ OK ] Listening on Journal Socket (/dev/log).
  324. [ 4.522695] systemd[1]: Listening on Journal Socket (/dev/log).
  325. [ 4.529033] systemd[1]: Starting udev Control Socket.
  326. [ OK ] Listening on udev Control Socket.
  327. [ 4.552695] systemd[1]: Listening on udev Control Socket.
  328. [ 4.558475] systemd[1]: Starting udev Kernel Socket.
  329. [ OK ] Listening on udev Kernel Socket.
  330. [ 4.582688] systemd[1]: Listening on udev Kernel Socket.
  331. [ 4.588374] systemd[1]: Starting Journal Socket.
  332. [ OK ] Listening on Journal Socket.
  333. [ 4.612701] systemd[1]: Listening on Journal Socket.
  334. [ 4.618093] systemd[1]: Starting System Slice.
  335. [ OK ] Created slice System Slice.
  336. [ 4.642743] systemd[1]: Created slice System Slice.
  337. [ 4.648039] systemd[1]: Starting File System Check on Root Device...
  338. Starting File System Check on Root Device...
  339. [ 4.675450] systemd[1]: Mounting Temporary Directory...
  340. Mounting Temporary Directory...
  341. [ 4.703928] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
  342. [ 4.717905] systemd[1]: Starting system-getty.slice.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement