API tools faq
paste
Guest User

Untitled

a guest
Feb 28th, 2013
53
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.28 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-faux123-mako-ge64003f-01303-ge2e1cb2 (faux123@fnv-beets) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #192 SMP PREEMPT Wed Feb 27 11:46:19 CST 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] allocating 21626880 bytes at c2268000 (82468000 physical) for fb
  15. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c370b000 s16384 r8192 d12288 u36864
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488963
  17. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_10 mdm_force_dump_enabled androidboot.emmc=true androidboot.serialno=004aa18f108e5811 androidboot.bootloader=MAKOZ10o androidboot.baseband=mdm bootreason=hw_reset_or_poweron
  18. [ 0.000000] UART CONSOLE : enable
  19. [ 0.000000] kcal is 0|0|0|x
  20. [ 0.000000] kcal not calibrated yet : 120
  21. [ 0.000000] set to default : 255
  22. [ 0.000000] BOARD : LGE input rev_10
  23. [ 0.000000] BOARD : LGE matched rev_10
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  28. [ 0.000000] Memory: 1914472k/1997416k available, 57748k reserved, 1286140K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0cb1ca8 (12968 kB)
  37. [ 0.000000] .init : 0xc0d00000 - 0xc0e04000 (1040 kB)
  38. [ 0.000000] .data : 0xc0e04000 - 0xc0efa8c0 ( 987 kB)
  39. [ 0.000000] .bss : 0xc0efa8e4 - 0xc11991dc (2683 kB)
  40. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] Preemptible hierarchical RCU implementation.
  42. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  43. [ 0.000000] NR_IRQS:921
  44. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  45. [ 0.000000] Console: colour dummy device 80x30
  46. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  47. [ 0.000213] pid_max: default: 32768 minimum: 301
  48. [ 0.000518] Mount-cache hash table entries: 512
  49. [ 0.001739] Initializing cgroup subsys debug
  50. [ 0.001770] Initializing cgroup subsys cpuacct
  51. [ 0.001770] Initializing cgroup subsys freezer
  52. [ 0.001800] Initializing cgroup subsys bfqio
  53. [ 0.001922] CPU: Testing write buffer coherency: ok
  54. [ 0.002166] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  55. [ 0.002197] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  56. [ 0.002289] Setting up static identity map for 0x80a2f4a0 - 0x80a2f528
  57. [ 0.005951] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  58. [ 0.008515] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  59. [ 0.011109] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  60. [ 0.011262] Brought up 4 CPUs
  61. [ 0.011262] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  62. [ 0.037509] dummy:
  63. [ 0.038211] NET: Registered protocol family 16
  64. [ 0.040164] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  65. [ 0.044254] meminfo_init: smem ram ptable found: ver: 0 len: 6
  66. [ 0.044285] Found 2 memory banks grouped into 16 memory regions
  67. [ 0.044620] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  68. [ 0.045536] smem_find(137, 80): wrong size 72
  69. [ 0.045566] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  70. [ 0.045566] accessory_chip=0 hw_plat_subtype=1
  71. [ 0.045750] msm_rpm_init: RPM firmware 3.0.16842886
  72. [ 0.064275] msm_rpm_get_status(): Status id 341 not defined for target
  73. [ 0.064275] msm_rpm_get_status(): Status id 341 not defined for target
  74. [ 0.064306] msm_rpm_get_status(): Status id 341 not defined for target
  75. [ 0.064306] msm_rpm_get_status(): Status id 341 not defined for target
  76. [ 0.064306] msm_rpm_get_status(): Status id 341 not defined for target
  77. [ 0.064336] msm_rpm_get_status(): Status id 341 not defined for target
  78. [ 0.064336] msm_rpm_get_status(): Status id 341 not defined for target
  79. [ 0.064367] msm_rpm_get_status(): Status id 341 not defined for target
  80. [ 0.065771] pm8921_probe: PMIC revision 1: F4
  81. [ 0.065771] pm8921_probe: PMIC revision 2: 06
  82. [ 0.065801] pm8921_probe: PMIC version: PM8921 rev 3.0
  83. [ 0.065801] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  84. [ 0.066870] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  85. [ 0.067388] pm_gpio_probe: OK: base=152, ngpio=44
  86. [ 0.067663] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  87. [ 0.067755] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  88. [ 0.069678] pm8821_probe: PMIC revision 1: PM8821 rev F3
  89. [ 0.069678] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  90. [ 0.069708] pm8821_probe: PMIC version: PM8821 ver 2.1
  91. [ 0.070288] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  92. [ 0.070318] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  93. [ 0.070746] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  94. [ 0.071936] saw_probe: id=0, name=8921_s5
  95. [ 0.072272] saw_probe: id=1, name=8921_s6
  96. [ 0.072577] saw_probe: id=2, name=8821_s0
  97. [ 0.072913] saw_probe: id=3, name=8821_s1
  98. [ 0.081306] persistent_ram: uncorrectable error in header
  99. [ 0.081306] persistent_ram: no valid data in buffer (sig = 0xc1c0c0c0)
  100. [ 0.094124] console [ram-1] enabled
  101. [ 0.095498] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  102. [ 0.095681] [DEBUG] uart_enable : 1
  103. [ 0.098214] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  104. [ 0.101724] sps:REVISION of BAM 0xf0068000 is 0x5.
  105. [ 0.101846] sps:BAM 0x12244000 is registered.
  106. [ 0.102395] sps:sps is ready.
  107. [ 0.133160] bio: create slab <bio-0> at 0
  108. [ 0.133862] ION heap vmalloc created
  109. [ 0.133984] ION heap mm created at a0000000 with size 3800000
  110. [ 0.134198] ION heap mm_fw created at 9fe00000 with size 1e0000
  111. [ 0.134411] ION heap mfc created at a3800000 with size 2000
  112. [ 0.134533] ION heap iommu created
  113. [ 0.134686] ION heap qsecom created at fea02000 with size 780000
  114. [ 0.134900] ION heap audio created at ff182000 with size 4cf000
  115. [ 0.136029] pm8xxx_pwm_probe: OK
  116. [ 0.136853] SCSI subsystem initialized
  117. [ 0.137128] sps:REVISION of BAM 0xf0070000 is 0x12.
  118. [ 0.137311] sps:BAM 0x28084000 is registered.
  119. [ 0.138196] usbcore: registered new interface driver usbfs
  120. [ 0.138470] usbcore: registered new interface driver hub
  121. [ 0.138776] usbcore: registered new device driver usb
  122. [ 0.139172] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  123. [ 0.139417] [sweep2wake]: set device pmic8xxx_pwrkey
  124. [ 0.140241] Linux media interface: v0.10
  125. [ 0.140454] Linux video capture interface: v2.00
  126. [ 0.142804] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  127. [ 0.143110] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  128. [ 0.143323] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  129. [ 0.143628] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  130. [ 0.143964] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  131. [ 0.144208] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  132. [ 0.144513] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  133. [ 0.144819] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  134. [ 0.145063] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  135. [ 0.145338] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  136. [ 0.145582] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  137. [ 0.145887] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  138. [ 0.146558] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  139. [ 0.146925] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  140. [ 0.147443] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  141. [ 0.147962] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  142. [ 0.148359] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  143. [ 0.148878] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  144. [ 0.149275] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  145. [ 0.149732] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  146. [ 0.150251] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  147. [ 0.150648] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  148. [ 0.151167] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  149. [ 0.151533] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  150. [ 0.152021] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  151. [ 0.152540] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  152. [ 0.152998] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  153. [ 0.153578] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  154. [ 0.154127] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  155. [ 0.154524] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  156. [ 0.154982] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  157. [ 0.155440] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  158. [ 0.155989] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  159. [ 0.156508] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  160. [ 0.156874] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  161. [ 0.157363] Advanced Linux Sound Architecture Driver Version 1.0.25.
  162. [ 0.158248] Bluetooth: Core ver 2.16
  163. [ 0.158583] NET: Registered protocol family 31
  164. [ 0.158736] Bluetooth: HCI device and connection manager initialized
  165. [ 0.159041] Bluetooth: HCI socket layer initialized
  166. [ 0.159194] Bluetooth: L2CAP socket layer initialized
  167. [ 0.159804] Bluetooth: SCO socket layer initialized
  168. [ 0.160354] cfg80211: Calling CRDA to update world regulatory domain
  169. [ 0.161483] earjack debugger probed
  170. [ 0.163100] Switching to clocksource gp_timer
  171. [ 0.204761] NET: Registered protocol family 2
  172. [ 0.205432] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  173. [ 0.206439] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  174. [ 0.208789] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  175. [ 0.210041] TCP: Hash tables configured (established 131072 bind 65536)
  176. [ 0.210315] TCP: reno registered
  177. [ 0.210499] UDP hash table entries: 512 (order: 2, 16384 bytes)
  178. [ 0.210804] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  179. [ 0.211445] NET: Registered protocol family 1
  180. [ 0.212269] RPC: Registered named UNIX socket transport module.
  181. [ 0.212452] RPC: Registered udp transport module.
  182. [ 0.212726] RPC: Registered tcp transport module.
  183. [ 0.212879] RPC: Registered tcp NFSv4.1 backchannel transport module.
  184. [ 0.213551] Trying to unpack rootfs image as initramfs...
  185. [ 0.252403] Freeing initrd memory: 412K
  186. [ 0.255547] Detected 5 counters on the L2CC PMU.
  187. [ 0.257805] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  188. [ 0.259758] pil_riva pil_riva: using secure boot
  189. [ 0.263390] pil_dsps pil_dsps: using secure boot
  190. [ 0.265191] pil_gss pil_gss: using secure boot
  191. [ 0.268304] smd_channel_probe_worker: allocation table not initialized
  192. [ 0.275202] msm_dsps driver version 4.02.
  193. [ 0.277460] NET: Registered protocol family 27
  194. [ 0.281245] lpass_fatal_init: lpass SSR driver init'ed.
  195. [ 0.281580] wcnss_8960: module initialized
  196. [ 0.282282] gss_8064_init: gss fatal driver init'ed.
  197. [ 0.283106] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  198. [ 0.283412] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  199. [ 0.286311] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
  200. [ 0.286708] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
  201. [ 0.286922] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
  202. [ 0.287318] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
  203. [ 0.289516] kcal_ctrl_init
  204. [ 0.290584] persistent_ram: no valid data in buffer (sig = 0xc0c0c0c0)
  205. [ 0.291805] msm_rpm_log_probe: OK
  206. [ 0.296505] mdm_do_first_power_on: Powering on modem for the first time
  207. [ 0.363161] mdm_pblrdy_change: pbl ready:1
  208. [ 0.573966] mdm_common_create: Registering mdm modem
  209. [ 0.574912] usbcore: registered new interface driver hsic_sysmon
  210. [ 0.719670] highmem bounce pool size: 64 pages
  211. [ 0.737128] NFS: Registering the id_resolver key type
  212. [ 0.739783] fuse init (API version 7.18)
  213. [ 0.740790] msgmni has been set to 1228
  214. [ 0.745734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  215. [ 0.746131] io scheduler noop registered
  216. [ 0.746345] io scheduler deadline registered (default)
  217. [ 0.746589] io scheduler row registered
  218. [ 0.747352] io scheduler cfq registered
  219. [ 0.747901] io scheduler bfq registered
  220. [ 0.748145] io scheduler fiops registered
  221. [ 0.748512] io scheduler sio registered
  222. [ 0.749580] lm3530 probed
  223. [ 0.753486] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  224. [ 0.753975] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf0082000
  225. [ 0.755226] mipi_lgit_lcd_probe start
  226. [ 0.755592] setting pdata->panel_info.fb_num to 3. type: 8
  227. [ 0.767770] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  228. [ 0.768136] load_565rle_image: Can not open /initlogo.rle
  229. [ 0.768686] mdp4_dsi_vsync_init: ndx=0
  230. [ 0.770608] setting pdata->panel_info.fb_num to 1. type: 7
  231. [ 0.774515] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  232. [ 0.774851] load_565rle_image: Can not open /initlogo.rle
  233. [ 0.775247] mdp4_dtv_vsync_init: ndx=0
  234. [ 0.775583] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf7e9c08
  235. [ 0.776346] setting pdata->panel_info.fb_num to 1. type: 10
  236. [ 0.776712] Inside writeback_driver_init
  237. [ 0.777079] Inside writeback_probe
  238. [ 0.780314] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  239. [ 0.780619] load_565rle_image: Can not open /initlogo.rle
  240. [ 0.782664]
  241. [ 0.782694] msm_vidc_enc: Inside vid_enc_init()
  242. [ 0.783671]
  243. [ 0.783671] msm_vidc_enc: Inside vid_enc_vcd_init()
  244. [ 0.786509] msm_serial_hs module loaded
  245. [ 0.787242] msm_serial_hsl: detected port #0
  246. [ 0.787700] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  247. [ 0.788188] msm_serial_hsl: console setup on port #0
  248. [ 0.788829] console [ttyHSL0] enabled
  249. [ 0.789653] msm_serial_hsl: driver initialized
  250. [ 0.791912] msm_rotator_probe: rotator_hw_revision=2
  251. [ 0.796612] diagchar initialized now
  252. [ 0.799084] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  253. [ 0.816236] brd: module loaded
  254. [ 0.824477] loop: module loaded
  255. [ 0.827468] anx7808 init gpio
  256. [ 0.864184] anx7808 dvdd is already on
  257. [ 0.893819] sp_tx_hardware_poweron: anx7808 power on
  258. [ 0.894643] sp_tx_chip_located: ANX7808 BA is found.
  259. [ 0.896017] sp_tx_vbus_powerdown: 3.3V output disabled
  260. [ 0.954219] sp_tx_hardware_powerdown: anx7808 power down
  261. [ 0.954341] sp_tx_set_sys_state: SP_TX To System State:
  262. [ 0.954524] sp_tx_set_sys_state: STATE_CABLE_PLUG
  263. [ 0.955165] tabla2x-slim tabla2x-slim: Platform data from board file
  264. [ 1.050938] wcd9xxx_device_init : Codec version 2 initialized
  265. [ 1.051976] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  266. [ 1.052159] i2c-core: driver [tabla-i2c-core] using legacy resume method
  267. [ 1.052983] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  268. [ 1.053319] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  269. [ 1.053593] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  270. [ 1.054448] SCSI Media Changer driver v0.25
  271. [ 1.055577] tun: Universal TUN/TAP device driver, 1.6
  272. [ 1.055669] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  273. [ 1.055943] rmnet_init: BAM devices[8]
  274. [ 1.062841] PPP generic driver version 2.4.2
  275. [ 1.063085] PPP BSD Compression module registered
  276. [ 1.063268] PPP Deflate Compression module registered
  277. [ 1.065252] PPP MPPE Compression module registered
  278. [ 1.065466] NET: Registered protocol family 24
  279. [ 1.065588] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  280. [ 1.065801] CSLIP: code copyright 1989 Regents of the University of California.
  281. [ 1.066076] wcnss_wlan probed in built-in mode
  282. [ 1.067144] usbcore: registered new interface driver asix
  283. [ 1.067358] usbcore: registered new interface driver cdc_ether
  284. [ 1.067633] usbcore: registered new interface driver net1080
  285. [ 1.067816] usbcore: registered new interface driver cdc_subset
  286. [ 1.068060] usbcore: registered new interface driver zaurus
  287. [ 1.068426] usbcore: registered new interface driver cdc_ncm
  288. [ 1.068731] usbcore: registered new interface driver rmnet_usb
  289. [ 1.069830] rmnet usb ctrl Initialized.
  290. [ 1.070013] msm_otg msm_otg: msm_otg probe
  291. [ 1.070166] msm_otg msm_otg: failed to get phy_clk
  292. [ 1.070410] msm_otg msm_otg: OTG regs = f009a000
  293. [ 1.073493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  294. [ 1.086922] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  295. [ 1.087074] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  296. [ 1.114298] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  297. [ 1.133892] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  298. [ 1.134167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  299. [ 1.134381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  300. [ 1.134472] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  301. [ 1.134655] usb usb1: Manufacturer: Linux 3.4.0-faux123-mako-ge64003f-01303-ge2e1cb2 ehci_hcd
  302. [ 1.134839] usb usb1: SerialNumber: msm_hsic_host
  303. [ 1.135388] hub 1-0:1.0: USB hub found
  304. [ 1.135510] hub 1-0:1.0: 1 port detected
  305. [ 1.137402] usbcore: registered new interface driver cdc_acm
  306. [ 1.137524] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  307. [ 1.137707] Initializing USB Mass Storage driver...
  308. [ 1.137921] usbcore: registered new interface driver usb-storage
  309. [ 1.138104] USB Mass Storage support registered.
  310. [ 1.138287] usbcore: registered new interface driver ums-alauda
  311. [ 1.138562] usbcore: registered new interface driver ums-cypress
  312. [ 1.138715] usbcore: registered new interface driver ums-datafab
  313. [ 1.138989] usbcore: registered new interface driver ums-freecom
  314. [ 1.139172] usbcore: registered new interface driver ums-isd200
  315. [ 1.139447] usbcore: registered new interface driver ums-jumpshot
  316. [ 1.139722] usbcore: registered new interface driver ums-karma
  317. [ 1.139874] usbcore: registered new interface driver ums-onetouch
  318. [ 1.140149] usbcore: registered new interface driver ums-sddr09
  319. [ 1.140332] usbcore: registered new interface driver ums-sddr55
  320. [ 1.140607] usbcore: registered new interface driver ums-usbat
  321. [ 1.140851] usbcore: registered new interface driver usbserial
  322. [ 1.141034] usbserial: USB Serial Driver core
  323. [ 1.141217] usbcore: registered new interface driver qcserial
  324. [ 1.141461] USB Serial support registered for Qualcomm USB modem
  325. [ 1.141645] usbcore: registered new interface driver qc_csvt
  326. [ 1.141889] USB Serial support registered for qc_csvt
  327. [ 1.142072] usbcore: registered new interface driver usb_ehset_test
  328. [ 1.142347] usbcore: registered new interface driver diag_bridge
  329. [ 1.142591] usbcore: registered new interface driver mdm_bridge
  330. [ 1.143262] msm_otg msm_otg: phy_reset: success
  331. [ 1.144086] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  332. [ 1.144483] mbim_init: initialize 1 instances
  333. [ 1.144666] mbim_init: Initialized 1 ports
  334. [ 1.146680] rndis_qc_init: initialize rndis QC instance
  335. [ 1.147260] android_usb gadget: Mass Storage Function, version: 2009/09/11
  336. [ 1.147382] android_usb gadget: Number of LUNs=1
  337. [ 1.147565] lun0: LUN: removable file: (no medium)
  338. [ 1.148023] android_usb gadget: android_usb ready
  339. [ 1.149610] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  340. [ 1.150160] [sweep2wake]: sweep2wake_init done
  341. [ 1.150740] [Touch D]touch enable
  342. [ 1.504379] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  343. [ 1.554158] input: touch_dev as /devices/virtual/input/input2
  344. [ 1.556874] [Touch] common[1] finger[17] flash[52] button[0]
  345. [ 1.558095] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E027.
  346. [ 1.559438] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  347. [ 1.559743] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  348. [ 1.559926] usb 1-1: Product: QHSUSB__BULK
  349. [ 1.560018] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  350. [ 1.561025] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  351. [ 1.561239] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  352. [ 1.561574] [Touch] Touch driver is initialized
  353. [ 1.562887] using rtc device, pm8xxx_rtc, for alarms
  354. [ 1.563100] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  355. [ 1.563680] qcserial 1-1:1.0: Qualcomm USB modem converter detected
  356. [ 1.564138] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
  357. [ 1.564993] i2c /dev entries driver
  358. [ 1.565908] usbcore: registered new interface driver uvcvideo
  359. [ 1.566030] USB Video Class driver (1.1.1)
  360. [ 1.567160] __jrchoi: msm_sensor_init_module: E
  361. [ 1.594903] msm_eeprom_probe probe_fail
  362. [ 1.595360] msm_server_update_sensor_info mctl_node_name[0] = video1
  363. [ 1.624660] msm_eeprom_probe probe_fail
  364. [ 1.625087] msm_server_update_sensor_info mctl_node_name[1] = video3
  365. [ 1.629452] msm_cam_server_request_irq IRQ Router hw is not present.
  366. [ 1.630093] lm3559_init
  367. [ 1.656615] pm8xxx_tm_probe: OK
  368. [ 1.657775] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  369. [ 1.658446] cpuidle: using governor ladder
  370. [ 1.658629] cpuidle: using governor menu
  371. [ 1.659148] mmc0: SDCC Version: 0x0000001a
  372. [ 1.660766] mmc0: bam physical base=0x12402000
  373. [ 1.660888] mmc0: bam virtual base=0xf00ac000
  374. [ 1.660979] sps:BAM 0x12402000 is registered.
  375. [ 1.661193] mmc0: BAM device registered. bam_handle=0xef0f1a00
  376. [ 1.661529] sps:REVISION of BAM 0xf00ac000 is 0x5.
  377. [ 1.662139] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  378. [ 1.662261] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  379. [ 1.662505] mmc0: No card detect facilities available
  380. [ 1.664550] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  381. [ 1.664733] mmc0: Controller capabilities: 0x0000039e
  382. [ 1.664916] mmc0: 8 bit data mode enabled
  383. [ 1.665099] mmc0: 4 bit data mode disabled
  384. [ 1.665191] mmc0: polling status mode disabled
  385. [ 1.665313] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  386. [ 1.665496] mmc0: Slot eject status = 0
  387. [ 1.665679] mmc0: Power save feature enable = 1
  388. [ 1.665862] mmc0: SPS-BAM data transfer mode available
  389. [ 1.666839] usbcore: registered new interface driver usbhid
  390. [ 1.667053] usbhid: USB HID core driver
  391. [ 1.668121] ashmem: initialized
  392. [ 1.668304] logger: created 256K log 'log_main'
  393. [ 1.668579] logger: created 256K log 'log_events'
  394. [ 1.668792] logger: created 256K log 'log_radio'
  395. [ 1.668976] logger: created 256K log 'log_system'
  396. [ 1.670868] coresight-tpiu coresight-tpiu.0: TPIU initialized
  397. [ 1.671509] coresight-etb coresight-etb.0: ETB initialized
  398. [ 1.672089] coresight-funnel coresight-funnel.0: FUNNEL initialized
  399. [ 1.674103] coresight-etm coresight-etm.0: ETM initialized
  400. [ 1.675598] coresight-etm coresight-etm.1: ETM initialized
  401. [ 1.676758] coresight-etm coresight-etm.2: ETM initialized
  402. [ 1.677979] coresight-etm coresight-etm.3: ETM initialized
  403. [ 1.678620] usbcore: registered new interface driver snd-usb-audio
  404. [ 1.680390] tabla_probe
  405. [ 1.681214] amp_enable: amp enable bypass(2)
  406. [ 1.681336] amp_enable: AMP_EN is set to 0
  407. [ 1.682466] msm_pcm_probe: dev name msm-voip-dsp
  408. [ 1.682893] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  409. [ 1.683076] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  410. [ 1.684510] msm_pcm_probe: dev name msm-pcm-dsp
  411. [ 1.685029] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  412. [ 1.685457] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  413. [ 1.686586] msm_compr_probe: dev name msm-compr-dsp
  414. [ 1.687349] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  415. [ 1.688539] msm8930_audio_init: Not the right machine type
  416. [ 1.688661] msm_audio_init: Not the right machine type
  417. [ 1.790599] mmc0: new high speed DDR MMC card at address 0001
  418. [ 1.804089] mmcblk0: mmc0:0001 016G92 14.6 GiB
  419. [ 1.809400] Alternate GPT is invalid, using primary GPT.
  420. [ 1.809705] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  421. [ 1.836441] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  422. [ 1.837753] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  423. [ 1.839127] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  424. [ 1.840408] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  425. [ 1.841751] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  426. [ 1.843033] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  427. [ 1.844468] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  428. [ 1.845688] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  429. [ 1.846970] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  430. [ 1.848283] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  431. [ 1.849656] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  432. [ 1.850907] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  433. [ 1.852281] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  434. [ 1.853563] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  435. [ 1.855058] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  436. [ 1.856889] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  437. [ 1.861864] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  438. [ 1.863055] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  439. [ 1.864459] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  440. [ 1.865618] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  441. [ 1.866839] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  442. [ 1.867999] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  443. [ 1.869281] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  444. [ 1.870441] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  445. [ 1.871692] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  446. [ 1.872852] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  447. [ 1.874133] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  448. [ 1.875324] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  449. [ 1.876545] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  450. [ 1.877704] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  451. [ 1.879017] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  452. [ 1.880238] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  453. [ 1.881489] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  454. [ 1.882649] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  455. [ 1.883900] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  456. [ 1.885121] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  457. [ 1.886342] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  458. [ 1.889882] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  459. [ 1.890370] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  460. [ 1.895498] oprofile: using arm/armv7-krait
  461. [ 1.895742] u32 classifier
  462. [ 1.895925] Actions configured
  463. [ 1.896047] Netfilter messages via NETLINK v0.30.
  464. [ 1.896230] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  465. [ 1.897237] ctnetlink v0.93: registering with nfnetlink.
  466. [ 1.897390] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  467. [ 1.897604] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  468. [ 1.897970] xt_time: kernel timezone is -0000
  469. [ 1.898580] ip_tables: (C) 2000-2006 Netfilter Core Team
  470. [ 1.898977] arp_tables: (C) 2002 David S. Miller
  471. [ 1.899282] TCP: bic registered
  472. [ 1.899374] TCP: cubic registered
  473. [ 1.899496] TCP: westwood registered
  474. [ 1.899679] TCP: htcp registered
  475. [ 1.899771] TCP: vegas registered
  476. [ 1.899893] Initializing XFRM netlink socket
  477. [ 1.900778] NET: Registered protocol family 10
  478. [ 1.903372] Mobile IPv6
  479. [ 1.903525] ip6_tables: (C) 2000-2006 Netfilter Core Team
  480. [ 1.904013] IPv6 over IPv4 tunneling driver
  481. [ 1.904867] NET: Registered protocol family 17
  482. [ 1.905020] NET: Registered protocol family 15
  483. [ 1.905539] Bluetooth: RFCOMM TTY layer initialized
  484. [ 1.905814] Bluetooth: RFCOMM socket layer initialized
  485. [ 1.906210] Bluetooth: RFCOMM ver 1.11
  486. [ 1.906424] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  487. [ 1.906638] Bluetooth: BNEP filters: protocol multicast
  488. [ 1.907034] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  489. [ 1.907553] L2TP core driver, V2.0
  490. [ 1.907981] PPPoL2TP kernel driver, V2.0
  491. [ 1.908225] Registering the dns_resolver key type
  492. [ 1.910544] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  493. [ 1.911033] Registering SWP/SWPB emulation handler
  494. [ 1.936609] clock_late_init: Removing enables held for handed-off clocks
  495. [ 1.942438] intelli_plug: version 1.4 by faux123
  496. [ 1.944056] LMF: enabled!
  497. [ 1.947169] MSM Watchdog Initialized
  498. [ 1.964657] registered taskstats version 1
  499. [ 1.966122] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-03-01 05:32:19 UTC (1362115939)
  500. [ 1.968136] read_ocv_trim: program rev reg is 0x4d
  501. [ 1.968564] pm8921_is_usb_chg_plugged_in: called before init
  502. [ 1.971310] pm8921_is_usb_chg_plugged_in: called before init
  503. [ 1.973081] pm8921_is_usb_chg_plugged_in: called before init
  504. [ 1.973386] ocv_ir_compensation: comp ocv = 3881444, ocv = 3880722, ibatt_ua = 3300, rbatt_mohm = 219
  505. [ 1.973935] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  506. [ 1.974393] pm8921_is_batfet_closed: called before init
  507. [ 2.004486] pm8921_is_usb_chg_plugged_in: called before init
  508. [ 2.004730] adjust_soc: ibat_ua = 246500, vbat_uv = 3839115, soc = 55, batt_temp=258
  509. [ 2.007446] pm8921_get_batt_state: called before init
  510. [ 2.007721] pm8921_bms_probe: OK battery_capacity_at_boot=55 volt = 3838806 ocv = 3888000
  511. [ 2.009827] pm8921_is_usb_chg_plugged_in: called before init
  512. [ 2.010041] pm8921_is_batfet_closed: called before init
  513. [ 2.034549] pm8921_is_usb_chg_plugged_in: called before init
  514. [ 2.034701] adjust_soc: ibat_ua = 251600, vbat_uv = 3839409, soc = 55, batt_temp=258
  515. [ 2.035556] power_supply usb: driver failed to report `present' property: 4294967274
  516. [ 2.035739] power_supply usb: driver failed to report `present' property: 4294967274
  517. [ 2.036105] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  518. [ 2.036380] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  519. [ 2.037936] pm8921_get_batt_state: called before init
  520. [ 2.040408] pm8921_get_batt_state: called before init
  521. [ 2.050419] msm_otg msm_otg: USB in low power mode
  522. [ 2.050694] wlc: bq51051b_wlc_probe: probe
  523. [ 2.051030] wlc: bq51051b_wlc_hw_init: hw_init
  524. [ 2.051487] power_supply wireless: driver failed to report `present' property: 4294967274
  525. [ 2.051793] power_supply wireless: driver failed to report `present' property: 4294967274
  526. [ 2.052311] batt_temp_ctrl_init
  527. [ 2.052525] batt_temp_ctrl_probe
  528. [ 2.053868] android_vibrator: default amplitude 88
  529. [ 2.054204] android vibrator probed
  530. [ 2.055760] input: hs_detect as /devices/virtual/input/input5
  531. [ 2.056310] ALSA device list:
  532. [ 2.056432] #0: apq8064-tabla-snd-card
  533. [ 2.058202] Freeing init memory: 1040K
  534. [ 2.064397] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  535. [ 2.220387] keychord: using input dev pmic8xxx_pwrkey for fevent
  536. [ 2.220479] keychord: using input dev keypad_8064 for fevent
  537. [ 2.220906] init: cannot open '/initlogo.rle'
  538. [ 2.269098] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  539. [ 2.281794] EXT4-fs (mmcblk0p22): recovery complete
  540. [ 2.282618] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  541. [ 2.345765] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  542. [ 2.406226] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  543. [ 2.817518] EXT4-fs (mmcblk0p23): recovery complete
  544. [ 2.818342] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  545. [ 2.835251] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  546. [ 2.865313] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  547. [ 2.876453] EXT4-fs (mmcblk0p20): recovery complete
  548. [ 2.877308] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  549. [ 2.948634] wcnss_wlan triggered by userspace
  550. [ 3.159896] pil pil1: wcnss: Brought out of reset
  551. [ 3.160109] wcnss_8960: Subsystem restart activated for riva.
  552. [ 3.196856] pil pil4: gss: Failed to locate gss.mdt
  553. [ 3.198077] pil pil4: gss: Failed to locate gss.mdt
  554. [ 3.199236] pil pil4: gss: Failed to locate gss.mdt
  555. [ 3.200640] pil pil4: gss: Failed to locate gss.mdt
  556. [ 3.218770] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  557. [ 3.219105] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  558. [ 3.219441] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  559. [ 3.227376] enable_store: android_usb: already disabled
  560. [ 3.227651] enable_store: android_usb: already disabled
  561. [ 3.228170] mtp_bind_config
  562. [ 3.228292] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  563. [ 3.357607] mdm_modem_ioctl: Powering on mdm
  564. [ 3.393438] warning: `rild' uses 32-bit capabilities (legacy support in use)
  565. [ 3.409095] msm_thermal: enabled = 0
  566. [ 3.527941] pil pil3: dsps: Brought out of reset
  567. [ 3.631924] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  568. [ 3.786998] mdp4_dtv_start: <ID=0 1920x1080 (88,44,148), (4,5,36) 148MHz>
  569. [ 3.789836] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0]
  570. [ 3.790599] hdmi_msm hdmi_msm.1: power: ON (1920x1080 148500000)
  571. [ 3.790721] hdmi_msm hdmi_msm.1: power=OFF DVI= OFF
  572. [ 3.790782] mdp4_dtv_on:
  573. [ 3.790874] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=1
  574. [ 3.790996] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core)
  575. [ 3.791057] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled
  576. [ 3.791179] dtv_off
  577. [ 3.793773] mdp4_dtv_off:
  578. [ 3.794262] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
  579. [ 4.144849] mipi_dsi_controller_cfg: DSI status=8 failed
  580. [ 4.144880] mipi_dsi_panel_power: mipi lcd function started status = 1
  581. [ 4.144910] ext_dsv_load: Failed to create debugfs directory
  582. [ 4.174637] mipi_dsi_panel_power : reset start.
  583. [ 4.196368] mipi_lgit_lcd_on started
  584. [ 4.217549] mipi_lgit_lcd_on finished
  585. [ 4.815473] pil pil0: q6: Brought out of reset
  586. [ 4.848039] apr_tal:Q6 Is Up
  587. [ 4.848557] apr_tal: SMD_EVENT_OPEN
  588. [ 4.865038] diag: proc 2, msg mask update fail -12, tried 419
  589. [ 4.894979] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  590. [ 4.895101] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  591. [ 4.895437] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  592. [ 4.895589] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  593. [ 4.895803] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  594. [ 5.073767] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
  595. [ 8.104837] apr_tal: SMD_EVENT_OPEN
  596. [ 10.806134] mdm_modem_ioctl: normal boot done
  597. [ 10.815168] mdm_pblrdy_change: pbl ready:0
  598. [ 11.458354] mdm_status_change: status = 1: mdm is now ready
  599. [ 11.477460] msm_hsic_host msm_hsic_host: remove, state 1
  600. [ 11.477582] usb usb1: USB disconnect, device number 1
  601. [ 11.477704] usb 1-1: USB disconnect, device number 2
  602. [ 11.479078] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
  603. [ 11.479322] qcserial 1-1:1.0: device disconnected
  604. [ 11.481519] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  605. [ 11.494643] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  606. [ 11.494765] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  607. [ 11.524889] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  608. [ 11.544941] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  609. [ 11.545154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  610. [ 11.545307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  611. [ 11.545429] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  612. [ 11.545490] usb usb1: Manufacturer: Linux 3.4.0-faux123-mako-ge64003f-01303-ge2e1cb2 ehci_hcd
  613. [ 11.545673] usb usb1: SerialNumber: msm_hsic_host
  614. [ 11.546406] hub 1-0:1.0: USB hub found
  615. [ 11.546528] hub 1-0:1.0: 1 port detected
  616. [ 11.914878] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  617. [ 11.978177] usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
  618. [ 11.978238] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
  619. [ 11.978361] usb 1-1: Product: Qualcomm CDMA Technologies MSM
  620. [ 11.978422] usb 1-1: Manufacturer: Qualcomm, Incorporated
  621. [ 11.987974] qcserial 1-1:1.2: Qualcomm USB modem converter detected
  622. [ 11.988493] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
  623. [ 11.992522] rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 72:e5:15:3c:41:01
  624. [ 11.995788] rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 72:e5:15:3c:41:01
  625. [ 12.007172] rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 72:e5:15:3c:41:01
  626. [ 12.026491] rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 72:e5:15:3c:41:01
  627. [ 13.645017] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS
  628. [ 20.436319] request_suspend_state: wakeup (1->0) at 20431526465 (2013-03-01 05:32:37.954523890 UTC)
  629. [ 20.623592] lowmem_shrink: convert oom_adj to oom_score_adj:
  630. [ 20.623744] oom_adj 0 => oom_score_adj 0
  631. [ 20.623805] oom_adj 1 => oom_score_adj 58
  632. [ 20.623866] oom_adj 2 => oom_score_adj 117
  633. [ 20.623989] oom_adj 4 => oom_score_adj 235
  634. [ 20.624050] oom_adj 9 => oom_score_adj 529
  635. [ 20.624172] oom_adj 15 => oom_score_adj 1000
  636. [ 20.790935] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  637. [ 20.887776] EXT4-fs (dm-0): re-mounted. Opts: (null)
  638. [ 20.894704] EXT4-fs (dm-0): re-mounted. Opts: (null)
  639. [ 20.971036] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  640. [ 21.053135] EXT4-fs (dm-1): re-mounted. Opts: (null)
  641. [ 21.060216] EXT4-fs (dm-1): re-mounted. Opts: (null)
  642. [ 21.135266] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  643. [ 21.191179] EXT4-fs (dm-2): re-mounted. Opts: (null)
  644. [ 21.198077] EXT4-fs (dm-2): re-mounted. Opts: (null)
  645. [ 21.269647] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
  646. [ 21.288478] EXT4-fs (dm-3): re-mounted. Opts: (null)
  647. [ 21.308194] EXT4-fs (dm-3): re-mounted. Opts: (null)
  648. [ 21.380527] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
  649. [ 21.392766] EXT4-fs (dm-4): re-mounted. Opts: (null)
  650. [ 21.408698] EXT4-fs (dm-4): re-mounted. Opts: (null)
  651. [ 21.487196] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
  652. [ 21.599114] EXT4-fs (dm-5): re-mounted. Opts: (null)
  653. [ 21.605127] EXT4-fs (dm-5): re-mounted. Opts: (null)
  654. [ 21.678162] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null)
  655. [ 21.692629] EXT4-fs (dm-6): re-mounted. Opts: (null)
  656. [ 21.709598] EXT4-fs (dm-6): re-mounted. Opts: (null)
  657. [ 21.783122] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (null)
  658. [ 21.803509] EXT4-fs (dm-7): re-mounted. Opts: (null)
  659. [ 21.821120] EXT4-fs (dm-7): re-mounted. Opts: (null)
  660. [ 21.894735] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (null)
  661. [ 21.908347] EXT4-fs (dm-8): re-mounted. Opts: (null)
  662. [ 21.925927] EXT4-fs (dm-8): re-mounted. Opts: (null)
  663. [ 22.005981] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (null)
  664. [ 22.114939] adjust_soc: ibat_ua = 401100, vbat_uv = 3810198, soc = 54, batt_temp=265
  665. [ 22.251793] EXT4-fs (dm-9): re-mounted. Opts: (null)
  666. [ 22.259484] EXT4-fs (dm-9): re-mounted. Opts: (null)
  667. [ 22.563375] acc_open
  668. [ 22.563528] acc_release
  669. [ 33.734014] transport_store: usb cable is not connected
  670. [ 35.363955] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  671. [ 40.186723] apr_tal: SMD_EVENT_OPEN
  672. [ 40.235525] amp_enable: AMP_EN is set to 1
  673. [ 42.115702] adjust_soc: ibat_ua = 991300, vbat_uv = 3710748, soc = 55, batt_temp=274
  674. [ 44.911368] SLIM_CL: skip reconfig sequence
  675. [ 44.919578] amp_enable: amp enable bypass(2)
  676. [ 44.919761] amp_enable: AMP_EN is set to 0
  677. [ 46.237631] EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  678. [ 46.251243] EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  679. [ 47.027681] EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  680. [ 47.040622] EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  681. [ 51.166885] faux123: user voltage table modified!
  682. [ 51.418892] lge_touch_sweep2wake_store: disabled
  683. [ 62.115672] adjust_soc: ibat_ua = 818200, vbat_uv = 3728160, soc = 55, batt_temp=283
  684. [ 64.767923] pm8xxx-led pm8xxx-led: resume red set 0
  685. [ 64.771371] pm8xxx-led pm8xxx-led: resume green set 0
  686. [ 64.771555] pm8xxx-led pm8xxx-led: resume blue set 0
  687. [ 64.779368] pm8xxx-led pm8xxx-led: resume red set 0
  688. [ 64.779795] pm8xxx-led pm8xxx-led: resume green set 0
  689. [ 64.779917] pm8xxx-led pm8xxx-led: resume blue set 0
  690. [ 64.945643] amp_enable: AMP_EN is set to 1
  691. [ 70.324950] SLIM_CL: skip reconfig sequence
  692. [ 70.333129] amp_enable: amp enable bypass(2)
  693. [ 70.333526] amp_enable: AMP_EN is set to 0
  694. [ 71.125530] amp_enable: AMP_EN is set to 1
  695. [ 74.238028] SLIM_CL: skip reconfig sequence
  696. [ 74.248313] amp_enable: amp enable bypass(2)
  697. [ 74.248527] amp_enable: AMP_EN is set to 0
  698. [ 77.515580] amp_enable: AMP_EN is set to 1
  699. [ 82.115672] adjust_soc: ibat_ua = 687400, vbat_uv = 3744390, soc = 54, batt_temp=288
  700. [ 85.172348] SLIM_CL: skip reconfig sequence
  701. [ 85.182450] amp_enable: amp enable bypass(2)
  702. [ 85.182633] amp_enable: AMP_EN is set to 0
  703. [ 88.015565] amp_enable: AMP_EN is set to 1
  704. [ 91.171432] SLIM_CL: skip reconfig sequence
  705. [ 91.180650] amp_enable: amp enable bypass(2)
  706. [ 91.180924] amp_enable: AMP_EN is set to 0
  707. [ 91.555531] amp_enable: AMP_EN is set to 1
  708. [ 100.301968] SLIM_CL: skip reconfig sequence
  709. [ 100.309110] amp_enable: amp enable bypass(2)
  710. [ 100.309262] amp_enable: AMP_EN is set to 0
  711. [ 102.115672] adjust_soc: ibat_ua = 684600, vbat_uv = 3743505, soc = 54, batt_temp=292
  712. [ 103.865618] amp_enable: AMP_EN is set to 1
  713. [ 108.620692] SLIM_CL: skip reconfig sequence
  714. [ 108.628933] amp_enable: amp enable bypass(2)
  715. [ 108.629177] amp_enable: AMP_EN is set to 0
  716. [ 116.385563] amp_enable: AMP_EN is set to 1
  717. [ 120.459056] SLIM_CL: skip reconfig sequence
  718. [ 120.468304] amp_enable: amp enable bypass(2)
  719. [ 120.468548] amp_enable: AMP_EN is set to 0
  720. [ 122.115824] adjust_soc: ibat_ua = 486300, vbat_uv = 3777735, soc = 54, batt_temp=292
  721. [ 125.994231] SysRq : Emergency Remount R/O
  722. [ 125.997253] EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
  723. [ 126.051457] EXT4-fs (mmcblk0p23): re-mounted. Opts: (null)
  724. [ 126.137768] EXT4-fs (mmcblk0p20): re-mounted. Opts: (null)
  725. [ 126.138287] Emergency Remount complete
  726. [ 126.197741] msm_hsic_host msm_hsic_host: remove, state 4
  727. [ 126.197863] usb usb1: USB disconnect, device number 1
  728. [ 126.197924] usb 1-1: USB disconnect, device number 2
  729. [ 126.200122] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
  730. [ 126.200579] qcserial 1-1:1.2: device disconnected
  731. [ 126.208637] rmnet_usb 1-1:1.5: rmnet_usb0: unregister 'rmnet_usb' usb-msm_hsic_host-1, RmNET net device
  732. [ 126.236746] rmnet_usb 1-1:1.6: rmnet_usb1: unregister 'rmnet_usb' usb-msm_hsic_host-1, RmNET net device
  733. [ 126.528490] rmnet_usb 1-1:1.7: rmnet_usb2: unregister 'rmnet_usb' usb-msm_hsic_host-1, RmNET net device
  734. [ 126.759987] rmnet_usb 1-1:1.8: rmnet_usb3: unregister 'rmnet_usb' usb-msm_hsic_host-1, RmNET net device
  735. [ 126.776621] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  736. [ 127.995788] mipi_lgit_lcd_shutdown finished
  737. [ 127.995910] Restarting system with command ''.
  738. [ 127.995971] Going down for restart now
  739.  
  740. No errors detected
  741. Boot info:
  742. Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!