KERNEL:kernel_sec_get_debug_level_from_boot=0x574f4c44
KERNEL:magic_number=0x0 DEBUG LEVEL low!!
(kernel_sec_set_upload_cause) : upload_cause set 0
VICTORY The **************SYSTEM_REV********** is 0xc
S5PC110 Hardware version : EVT1
S3C Power Management, Copyright 2004 Simtec Electronics
pmstats at 57fff400
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
regulator: pd_audio_supply: 5000 mV normal
regulator: pd_cam_supply: 5000 mV normal
regulator: pd_tv_supply: 5000 mV normal
regulator: pd_lcd_supply: 5000 mV normal
regulator: pd_g3d_supply: 5000 mV normal
regulator: pd_mfc_supply: 5000 mV normal
bio: create slab <bio-0> at 0
SCSI subsystem initialized
i2c-gpio i2c-gpio.4: using pins 248 (SDA) and 247 (SCL)
i2c-gpio i2c-gpio.5: using pins 42 (SDA) and 43 (SCL)
max8998_pmic_probe : buck1 - idx(1) v1(21) v2(18) v3(12) v4(8)
max8998_pmic_probe : buck2 - idx(0) v1(14) v2(10)
regulator: VALIVE_1.2V: 1200 mV
regulator: VUSB_1.1V: 1100 mV
regulator: VADC_3.3V: 3300 mV
regulator: CAM_SENSOR_CORE_1.8V: 1800 mV
regulator: VLCD_1.8V: 1800 mV
regulator: VUSB_3.3V: 3300 mV
regulator: VCC_2.8V_PDA: 2800 mV
regulator: CAM_AF_3.0V: 3000 mV
regulator: CAM_SENSOR_CORE_1.2V: 1200 mV
regulator: VGA_VDDIO_2.8V: 2800 mV
regulator: VGA_DVDD_1.8V: 1800 mV
regulator: CAM_ISP_HOST_2.8V: 2800 mV
regulator: VCC_3.0V_LCD: 3000 mV
regulator: VDD_ARM: 750 <--> 1500 mV at 1200 mV
regulator: VDD_INT: 750 <--> 1500 mV at 1100 mV
regulator: VCC_1.8V: 1800 mV
regulator: CAM_ISP_CORE_1.2V: 1200 mV
regulator: ESAFEOUT2:
i2c-gpio i2c-gpio.6: using pins 204 (SDA) and 203 (SCL)
i2c-gpio i2c-gpio.9: using pins 237 (SDA) and 235 (SCL)
i2c-gpio i2c-gpio.11: using pins 202 (SDA) and 201 (SCL)
regulator: WIMAX_2.9V: 2900 mV
regulator: TOUCH_KEY_3.0V: 3000 mV
regulator: VCC_MOTOR_3.0V: 3000 mV
regulator: WIMAX_SDIO_3.0V: 3000 mV
regulator: VDD_RF & IO_1.8V: 1800 mV
regulator: VDDA & SDRAM & WIMAX_USB & RFC1C4_1.8V: 1800 mV
i2c-gpio i2c-gpio.12: using pins 25 (SDA) and 27 (SCL)
i2c-gpio i2c-gpio.10: using pins 120 (SDA) and 122 (SCL)
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
wake enabled for irq 36
wake disabled for irq 36
S5PV210 ADC driver, (c) 2010 Samsung Electronics
cpuidle: phy_regs_save:0x34e62000
Loaded driver for PL330 DMAC-0 s3c-pl330
	DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
ashmem: initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 713
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
MDNIE  INIT ..........
S3C MDNIE Driver, (c) 2010 Samsung Electronics
MDNIE  INIT SUCCESS Addr : 0xe8092000
IELCD  INIT ..........
S3C IELCD Driver, (c) 2010 Samsung Electronics
IELCD  INIT SUCCESS Addr : 0xe80a0000
s3cfb s3cfb: [fb2] dma: 0x4fc00000, cpu: 0xe8800000, size: 0x002ee000
FIMD src sclk = 166750000
s3cfb s3cfb: closing bootloader FIMD window 0
s3cfb s3cfb: registered successfully
PA FB = 0x4FC00000, bits per pixel = 32
screen width=480 height=800 va=0xdfc00000 pa=0x4fc00000
xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0
fb_size=3072000
Back frameBuffer[0].VAddr=dfd77000 PAddr=4fd77000 size=1536000
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
Android kernel panic handler initialized (bind=kpanic)
Loading pn544 driver
sec_jack_probe : Registering jack driver
input: sec_jack as /devices/virtual/input/input0
******************* LNT DEBUG *********** gpio request for SEC JACK is success, gpio-pin : 134
 ******************* LNT DEBUG *********** IRQ SEC JACK registration is success, gpio-pin : 38

wake enabled for irq 38
 *************** LNT DEBUG *********** SEC JACK DETECTED ******
 *************** LNT DEBUG *************** jack_detect_change
jack_detect_change state 0 send_end_irq_token 0Headset state does not valid. or send_end event******************* LNT DEBUG *********** SEND END OPEN IRQ registration success, gpio-pin : 130
  *************** LNT DEBUG *************** jack_detect_change
jack_detect_change state 0 send_end_irq_token 0Headset state does not valid. or send_end event
wake enabled for irq 167
fsa9480 1-0025: dev1: 0x0, dev2: 0x0
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
[PAM:   ] ++FSR_PAM_Init
[PAM:   ]   OneNAND physical base address       : 0xb0000000
[PAM:   ]   OneNAND virtual  base address       : 0xe80c0000
[PAM:   ]   OneNAND nMID=0xec : nDID=0x60 Page size=4
[PAM:   ] --FSR_PAM_Init
[BIF:   ]   FSR VERSION: FSR_1.2.1p1_b139_RTM
[OND:INF]   FSR_OND_4K_Open(nDev:0, pParam:0xc4c21e48, nFlag:0x00000000) / 1033 line
            pstOND4kCxt->nBaseAddr: 0xe80c0000
            nDev=0, nMID=0x00ec, nDID=0x0060, nVID=0x0031
[OND:INF]   pstOND4kCxt->nSysConf1:0xf006 / 1116 line
[OND:INF]   pstOND4kCxt->nBlksForSLCArea[0]:4096 / 1133 line
[OND:INF]   pstOND4kCxt->nIntID   :0x0000 / 1236 line
[OND:INF]   1X_CACHEPGM CMD : 0x007f
[OND:INF]   1X_PLOAD    CMD : 0x0003
[BBM:INF]   Scan from 4012 to 4095 to find BML meta blocks (die: 0)
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   a5a5 a5a5 ffff
FSR: Registered TinyFSR Driver.
tl2796_probe successfully proved
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c0ab2380
usb vid=0x4e8,pid=0x6877,ver=0x0,product_name=SAMSUNG_Android,manufacturer_name=SAMSUNG,serial=393049B7742500EC
android_bind
android_bind_config
android_usb gadget: android_usb ready
[otg_clock_enable] clk_enable(otg_clock) OK.
[otg_clock_enable] clk_disable(otg_clock) OK.
Registered gadget driver 'android_usb'
f_acm init
android_register_function acm
f_adb init
android_register_function adb
f_mass_storage init
fsg_probe pdev: c0ab1720, pdata: c0ab23a4
android_register_function usb_mass_storage
f_mtp init
android_register_function mtp
f_rndis init
android_register_function rndis
DUN is registerd
[composite_switch_work]config=0x(null)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
adb_bind_config
rndis_function_bind_config MAC: 02:00:00:00:00:00
android_usb gadget: using random self ethernet address
android_usb gadget: using random host ethernet address
usb0: MAC ce:0f:ee:04:81:62
usb0: HOST MAC ae:fe:45:1a:ee:65
[mtpg_function_bind] 	line = [934]
[mtpg_function_bind] 	dual speed line = [1001]
***** [mtpg_function_bind:1018] calling mtp_function_enable with 0
[mtp_function_enable] mtp_function => (enabled)
****** mtp_function_enable and line 1320 fs and hs desc
usb enable mode=0x0 (function: samsung_enable_function)
usb mode = USBSTATUS_UMS (0x0)
usb disable acm
usb enable usb_mass_storage
usb disable adb
usb disable rndis
usb disable mtp
usb Change Device Descriptor : DeviceClass(0x0),SubClass(0x0),Protocol(0x0)
usb Change Label : [2]UMS Only (Not debugging mode)
usb Save usb mode except tethering and askon (mode=0)
dev->cdev=0xc4d7b840, dev->cdev->gadget=0xc0ad5c38, dev->cdev->gadget->speed=0x0, mode=0
usb skip reset
usb finished setting pid=0x681d currentusbstate: 0 (func: samsung_enable_function)
usb Don't enable udc.
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice

 can_request_irq=1
wake enabled for irq 37

@@ Slidegpio_isr_setup
input: s3c-keypad as /devices/virtual/input/input1
s3c-keypad Initialized
S3C Keypad Driver
bma023 1-0038: bma023 found
bma023 1-0038: al_version=2, ml_version=1
input: accelerometer_sensor as /devices/virtual/input/input2
input: magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input3
input: raw_magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input4
input: orientation_sensor as /devices/virtual/input/input5
wake enabled for irq 166
GPIO Input Driver: Start gpio inputs for victory-keypad in interrupt mode
input: victory-keypad as /devices/virtual/input/input6
input: proximity_sensor as /devices/virtual/input/input7
input: light_sensor as /devices/virtual/input/input8
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics

S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
max17040 9-0036: MAX17040 Fuel-Gauge Ver 03
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
mmc1: no vmmc regulator found
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
Universal :SD Detect configuration
Universal : Card status 1
mmc2: no vmmc regulator found
Registered led device: mmc2::
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
sdhci: card interrupt.
Universal : Card status 1
sdhci: card inserted.
Registered led device: red
Registered led device: blue
logger: created 512K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
level device init
No device for DAI WM8994 PAIFRX
wm8994_probe: WM8994 Audio Codec 0.1
[ wm8994_samsung.c (wm8994_i2c_probe,3591) ]
[ wm8994_samsung.c (wm8994_init,3426) ]
[ wm8994_crespo.c (wm8994_configure_clock,755) ] USBOSC Enabled in Sleep Mode

sound_tty procfs initialised
sound_tty procfs initialised
asoc: WM8994 PAIFRX <-> s5pc1xx-i2s mapping ok
wm8994_init: wm8994_pdata = pdata, pdata=c0aae1d4
ALSA device list:
  #0: smdkc110 (WM8994)
GACT probability NOT on
Mirror/redirect action on
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (5710 buckets, 22840 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
NET: Registered protocol family 35
ThumbEE CPU extension supported.
S5PV210 CPUFREQ Initialising...
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
regulator_init_complete: incomplete constraints, leaving VCC_1.8V on
regulator_init_complete: incomplete constraints, leaving CAM_SENSOR_CORE_1.8V on
regulator_init_complete: incomplete constraints, leaving VADC_3.3V on
regulator_init_complete: incomplete constraints, leaving pd_mfc_supply on
regulator_init_complete: incomplete constraints, leaving pd_tv_supply on
regulator_init_complete: incomplete constraints, leaving pd_cam_supply on
input: cypress-touchkey as /devices/virtual/input/input9
Universal : Card status 1
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted
mmc2: new high speed SDHC card at address e68b
mmcblk0: mmc2:e68b SU08G 7.40 GiB
 mmcblk0: p1
cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x0, rev2 = 0x0
irq number = 308
+-----------------------------------------+
|  Quantum Touch Driver Probe!            |
+-----------------------------------------+
input: qt602240_ts_input as /devices/virtual/input/input10
0x1c
0x34
0xff
0x00


0x1c
0x34
0xff
0x00


s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c-rtc s3c2410-rtc: setting system clock to 2005-01-01 00:00:09 UTC (1104537609)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
max8998_charger_probe : MAX8998 Charger Driver Loading
check_lpm_charging_mode : lpm_charging_mode(0)
[TSP] msg id =  1 90 d7 64 79 0 0 0 0
[TSP] msg id =  1 0 d7 64 79 0 0 0 0
wake enabled for irq 39
Warning: unable to open an initial console.
max8998_int_work_func
max8998_charging_control : chg(0) cable(0) dis(0) bat(100,0,0), esafe(2)
Freeing init memory: 5356K
fsr: module license 'Samsung Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
[PAM:   ] ++FSR_PAM_Init
[PAM:   ]   OneNAND physical base address       : 0xb0000000
[PAM:   ]   OneNAND virtual  base address       : 0xe8280000
[PAM:   ]   OneNAND Controller DMA physical base address       : 0xb0600000
[PAM:   ]   OneNAND Controller DMA virtual  base address       : 0xe82c0000
[PAM:   ]   OneNAND nMID=0xec : nDID=0x60 Page size=4
[PAM:   ] --FSR_PAM_Init
[BIF:   ]   FSR VERSION: FSR_1.2.1p1_b139_RTM
[OND:INF]   FSR_OND_4K_Open(nDev:0, pParam:0xc4185e28, nFlag:0x00000000) / 1033 line
            pstOND4kCxt->nBaseAddr: 0xe8280000
            nDev=0, nMID=0x00ec, nDID=0x0060, nVID=0x0031
[OND:INF]   pstOND4kCxt->nSysConf1:0xf006 / 1116 line
[OND:INF]   pstOND4kCxt->nBlksForSLCArea[0]:4096 / 1133 line
[OND:INF]   pstOND4kCxt->nIntID   :0x0000 / 1236 line
[OND:INF]   1X_CACHEPGM CMD : 0x007f
[OND:INF]   1X_PLOAD    CMD : 0x0003
[BBM:INF]   Scan from 4012 to 4095 to find BML meta blocks (die: 0)
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
[BBM:INF]   a5a5 a5a5 ffff
[BBM:   ]  << DevNO:0, DieNO: 0 MAPPING INFORMATION >>
[BBM:   ]   Bad Mark Information
[BBM:   ]      - Bad Mark (0x2222) by erase error
[BBM:   ]      - Bad Mark (0x4444) by write error
[BBM:   ]   0000: Sbn[ 2832]==>Rbn[ 4090] / BadMark: 0x0000 / SLC / Lock: UL
[BBM:   ]   0001: Sbn[ 2874]==>Rbn[ 4089] / BadMark: 0x0000 / SLC / Lock: UL
[BBM:   ]   << Total : 2 BAD-MAPPING INFORMATION >>
[BIF:   ]   nPartition Information (nVol : 0)
            nVer : 0x10000
            00 / nID:0x00 / nAttr:0x00001002 / 1stVun:    0 / Units:    1
            01 / nID:0x01 / nAttr:0x00001002 / 1stVun:    1 / Units:    1
            02 / nID:0x20 / nAttr:0x00001101 / 1stVun:    2 / Units:   40
            03 / nID:0x03 / nAttr:0x00001002 / 1stVun:   42 / Units:    5
            04 / nID:0x04 / nAttr:0x00001002 / 1stVun:   47 / Units:    5
            05 / nID:0x21 / nAttr:0x00001101 / 1stVun:   52 / Units:   20
            06 / nID:0x06 / nAttr:0x00001002 / 1stVun:   72 / Units:   30
            07 / nID:0x07 / nAttr:0x00001002 / 1stVun:  102 / Units:   30
            08 / nID:0x22 / nAttr:0x00001101 / 1stVun:  132 / Units: 1074
            09 / nID:0x23 / nAttr:0x00001101 / 1stVun: 1206 / Units: 2056
            10 / nID:0x24 / nAttr:0x00001101 / 1stVun: 3262 / Units:  700
            11 / nID:0x11 / nAttr:0x00001002 / 1stVun: 3962 / Units:   50
[BBM:INF]   The registered blocks in ERL are handled
[BBM:INF]   (number of blocks: 0)
BML: Registered BML Driver.
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
[BIF:   ]   FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1027 line
FSR: Registered STL Driver.
[BIF:   ]   FSR VERSION: FSR_1.2.1p1_b139_RTM
[BIF:   ]   FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1171 line
[SIF:INF]   ===> STL Clst[ 1] Scan Root Info
[SIF:INF]   ===> STL Zone[ 1, 0] Open Zone Meta
[SIF:INF]   Latest Header Index        (    0)  Vbn    (    2)
[SIF:INF]   Latest Header Clean Page Offset          (    4)
[SIF:INF]   POR write timer     : 0xc4
[SIF:INF]   Latest Context BlockIdx    (    0)  Offset (    3)  Vpn (  131)
[SIF:INF]   Number of Free Block       (    4)
[SIF:INF]   Active Log List     : Num  (    1)
[SIF:INF]   ===> STL Zone[ 1, 0] Open Zone Post
[SIF:INF]   ===> STL Zone[ 1, 0] Validity check
[SIF:INF]   Partition [0, 21] open is success
[SIF:INF]   Zone[ 1, 0]: nDgn(    2) nVbn(   18) S(  0)-E(  2) nCPOffs(  3)
param_init
load_lfs_param_value: param.blk read successfully.
inside set_param_value1 idx = 9, value = -1004954156
save_lfs_param_value: param.blk write successfully.
Restarting system.
KERNEL:magic_number=0 CLEAR_UPLOAD_MAGIC_NUMBER
arch_reset: attempting watchdog reset

No errors detected