Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.9-gentoo (root@don't want to leave my username public) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.0, pie-0.4.6) ) #1 SMP PREEMPT Sun Mar 4 19:51:35 EET 2012
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000000000 - 00000000bff80000 (usable)
- [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000000000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: System manufacturer P5K SE/P5K SE, BIOS 1104 07/07/2008
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000000000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000000000 (usable)
- [ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-DFFFF write-protect
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] ACPI: RSDP 000fbdd0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT bff80000 0003C (v01 A_M_I_ OEMRSDT 07000807 MSFT 00000097)
- [ 0.000000] ACPI: FACP bff80200 00084 (v02 A_M_I_ OEMFACP 07000807 MSFT 00000097)
- [ 0.000000] ACPI: DSDT bff805c0 07EB9 (v01 A0807 A0807000 00000000 INTL 20060113)
- [ 0.000000] ACPI: FACS bff8e000 00040
- [ 0.000000] ACPI: APIC bff80390 0006C (v01 A_M_I_ OEMAPIC 07000807 MSFT 00000097)
- [ 0.000000] ACPI: MCFG bff80400 0003C (v01 A_M_I_ OEMMCFG 07000807 MSFT 00000097)
- [ 0.000000] ACPI: OEMB bff8e040 00081 (v01 A_M_I_ AMI_OEM 07000807 MSFT 00000097)
- [ 0.000000] ACPI: HPET bff88480 00038 (v01 A_M_I_ OEMHPET 07000807 MSFT 00000097)
- [ 0.000000] ACPI: OSFR bff884c0 000B0 (v01 A_M_I_ OEMOSFR 07000807 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2183MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000bff80
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000bff80
- [ 0.000000] On node 0 totalpages: 786191
- [ 0.000000] free_area_init_node: node 0, pgdat c1764f00, node_mem_map f5ffd200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4368 pages used for memmap
- [ 0.000000] HighMem zone: 554610 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
- [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000000000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
- [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s29504 r0 d23744 u2097152
- [ 0.000000] pcpu-alloc: s29504 r0 d23744 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780047
- [ 0.000000] Kernel command line: video=vesafb:mttr:3,ywrap vga=0x369 root=/dev/sda1 zcache quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff80)
- [ 0.000000] Memory: 3110516k/3145216k available (5325k kernel code, 34248k reserved, 2281k data, 380k init, 2235912k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc176e000 - 0xc17cd000 ( 380 kB)
- [ 0.000000] .data : 0xc15335ff - 0xc176db80 (2281 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc15335ff (5325 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2669.688 MHz processor.
- [ 0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5339.37 BogoMIPS (lpj=2669688)
- [ 0.001005] pid_max: default: 32768 minimum: 301
- [ 0.001023] Security Framework initialized
- [ 0.001036] Mount-cache hash table entries: 512
- [ 0.001144] Initializing cgroup subsys cpuacct
- [ 0.001148] Initializing cgroup subsys freezer
- [ 0.001150] Initializing cgroup subsys blkio
- [ 0.001173] CPU: Physical Processor ID: 0
- [ 0.001174] CPU: Processor Core ID: 0
- [ 0.001177] mce: CPU supports 6 MCE banks
- [ 0.001183] CPU0: Thermal monitoring enabled (TM2)
- [ 0.001186] using mwait in idle threads.
- [ 0.001247] ACPI: Core revision 20110623
- [ 0.005051] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.006173] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.016180] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
- [ 0.016998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- [ 0.016998] PEBS disabled due to CPU errata.
- [ 0.016998] ... version: 2
- [ 0.016998] ... bit width: 40
- [ 0.016998] ... generic registers: 2
- [ 0.016998] ... value mask: 000000ffffffffff
- [ 0.016998] ... max period: 000000007fffffff
- [ 0.016998] ... fixed-purpose events: 3
- [ 0.016998] ... event mask: 0000000000000000
- [ 0.028022] CPU 1 irqstacks, hard=f547e000 soft=f5480000
- [ 0.028025] Booting Node 0, Processors #1 Ok.
- [ 0.028028] smpboot cpu 1: start_ip = 9b000
- [ 0.001999] Initializing CPU#1
- [ 0.001999] calibrate_delay_direct() dropping max bogoMips estimate 4 = 8009116
- [ 0.100003] Brought up 2 CPUs
- [ 0.100006] Total of 2 processors activated (10678.80 BogoMIPS).
- [ 0.101032] devtmpfs: initialized
- [ 0.101148] PM: Registering ACPI NVS region at bff8e000 (335872 bytes)
- [ 0.101148] kworker/u:0 used greatest stack depth: 7120 bytes left
- [ 0.101148] NET: Registered protocol family 16
- [ 0.102026] ACPI: bus type pci registered
- [ 0.102027] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.102027] PCI: not using MMCONFIG
- [ 0.102227] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
- [ 0.102229] PCI: Using configuration type 1 for base access
- [ 0.102254] kworker/u:0 used greatest stack depth: 6944 bytes left
- [ 0.108087] bio: create slab <bio-0> at 0
- [ 0.108087] ACPI: Added _OSI(Module Device)
- [ 0.108087] ACPI: Added _OSI(Processor Device)
- [ 0.108087] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.108087] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.109605] ACPI: EC: Look up EC in DSDT
- [ 0.110830] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.115138] ACPI: SSDT bff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.115436] ACPI: Dynamic OEM Table Load:
- [ 0.115439] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.115589] ACPI: SSDT bff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.115882] ACPI: Dynamic OEM Table Load:
- [ 0.115885] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.116028] ACPI: Interpreter enabled
- [ 0.116038] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.116057] ACPI: Using IOAPIC for interrupt routing
- [ 0.116077] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.116512] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.116514] PCI: Using MMCONFIG for extended config space
- [ 0.122072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.122072] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.123015] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.123018] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.123020] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.123022] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.123024] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
- [ 0.123036] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
- [ 0.123075] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
- [ 0.123112] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.123115] pci 0000:00:01.0: PME# disabled
- [ 0.123148] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
- [ 0.123186] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
- [ 0.123232] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
- [ 0.123270] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
- [ 0.123316] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
- [ 0.123354] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
- [ 0.123408] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
- [ 0.123427] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
- [ 0.123509] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.123513] pci 0000:00:1a.7: PME# disabled
- [ 0.123534] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
- [ 0.123548] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
- [ 0.123608] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.123612] pci 0000:00:1b.0: PME# disabled
- [ 0.123629] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
- [ 0.123668] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
- [ 0.123714] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
- [ 0.123752] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
- [ 0.123797] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
- [ 0.123835] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
- [ 0.123889] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
- [ 0.123908] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
- [ 0.124014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.124018] pci 0000:00:1d.7: PME# disabled
- [ 0.124035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.124090] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
- [ 0.124164] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.124207] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
- [ 0.124221] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
- [ 0.124229] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
- [ 0.124236] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
- [ 0.124243] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
- [ 0.124250] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
- [ 0.124258] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
- [ 0.124299] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
- [ 0.124312] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
- [ 0.124331] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- [ 0.124360] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
- [ 0.124374] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
- [ 0.124381] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
- [ 0.124388] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
- [ 0.124395] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
- [ 0.124403] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
- [ 0.124410] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
- [ 0.124479] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
- [ 0.124488] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
- [ 0.124498] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.124508] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
- [ 0.124515] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
- [ 0.124523] pci 0000:01:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
- [ 0.124571] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.124574] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.124577] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
- [ 0.124581] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.124609] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
- [ 0.124625] pci 0000:02:01.0: reg 10: [io 0xe800-0xe8ff]
- [ 0.124635] pci 0000:02:01.0: reg 14: [mem 0xfebffc00-0xfebffcff]
- [ 0.124697] pci 0000:02:01.0: supports D1 D2
- [ 0.124699] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.124703] pci 0000:02:01.0: PME# disabled
- [ 0.124742] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
- [ 0.124746] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.124750] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.124755] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.124757] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.124760] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.124762] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.124764] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
- [ 0.124773] pci_bus 0000:00: on NUMA node 0
- [ 0.124775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.124899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
- [ 0.124932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.125042] pci0000:00: Requesting ACPI _OSC control (0x15)
- [ 0.125045] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x15
- [ 0.125047] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.131394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
- [ 0.131394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12 *14 15)
- [ 0.132039] ACPI: PCI Interrupt Link [LNKC] (IRQs 0 0 0 0 0 00 00 00 00 *15)
- [ 0.132079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.132119] ACPI: PCI Interrupt Link [LNKE] (IRQs 0 0 0 0 0 00 00 00 00 00) *0, disabled.
- [ 0.132159] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *0 0 0 00 00 00 00 00)
- [ 0.132199] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.132239] ACPI: PCI Interrupt Link [LNKH] (IRQs *0 0 0 0 0 00 00 00 00 00)
- [ 0.132267] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.132267] vgaarb: loaded
- [ 0.132267] vgaarb: bridge control possible 0000:01:00.0
- [ 0.132267] SCSI subsystem initialized
- [ 0.132267] libata version 3.00 loaded.
- [ 0.132267] usbcore: registered new interface driver usbfs
- [ 0.132267] usbcore: registered new interface driver hub
- [ 0.132267] usbcore: registered new device driver usb
- [ 0.133009] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.133009] PCI: Using ACPI for IRQ routing
- [ 0.133009] PCI: pci_cache_line_size set to 64 bytes
- [ 0.133057] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.133059] reserve RAM buffer: 00000000bff80000 - 00000000bfffffff
- [ 0.133084] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.133084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.133084] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.138101] Switching to clocksource hpet
- [ 0.140065] FS-Cache: Loaded
- [ 0.140119] CacheFiles: Loaded
- [ 0.143417] pnp: PnP ACPI init
- [ 0.143424] ACPI: bus type pnp registered
- [ 0.143499] pnp 00:00: [bus 00-ff]
- [ 0.143502] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.143504] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.143506] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.143508] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.143510] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.143512] pnp 00:00: [mem 0xc0000000-0xffffffff window]
- [ 0.143580] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.143590] pnp 00:01: [mem 0xfed14000-0xfed19fff]
- [ 0.143648] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.143651] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.143681] pnp 00:02: [dma 4]
- [ 0.143683] pnp 00:02: [io 0x0000-0x000f]
- [ 0.143685] pnp 00:02: [io 0x0081-0x0083]
- [ 0.143687] pnp 00:02: [io 0x0087]
- [ 0.143689] pnp 00:02: [io 0x0089-0x008b]
- [ 0.143690] pnp 00:02: [io 0x008f]
- [ 0.143692] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.143735] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.143746] pnp 00:03: [io 0x0070-0x0071]
- [ 0.143754] pnp 00:03: [irq 8]
- [ 0.143796] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.143805] pnp 00:04: [io 0x0061]
- [ 0.143847] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.143856] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.143861] pnp 00:05: [irq 13]
- [ 0.143907] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.144195] pnp 00:06: [irq 6]
- [ 0.144197] pnp 00:06: [dma 2]
- [ 0.144199] pnp 00:06: [io 0x03f0-0x03f5]
- [ 0.144201] pnp 00:06: [io 0x03f7]
- [ 0.144306] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.144333] pnp 00:07: [io 0x0000-0xffffffff disabled]
- [ 0.144335] pnp 00:07: [io 0x0000-0xffffffff disabled]
- [ 0.144337] pnp 00:07: [io 0x0290-0x0297]
- [ 0.144398] system 00:07: [io 0x0290-0x0297] has been reserved
- [ 0.144401] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.144488] pnp 00:08: [io 0x0010-0x001f]
- [ 0.144490] pnp 00:08: [io 0x0022-0x003f]
- [ 0.144492] pnp 00:08: [io 0x0044-0x004d]
- [ 0.144494] pnp 00:08: [io 0x0050-0x005f]
- [ 0.144495] pnp 00:08: [io 0x0062-0x0063]
- [ 0.144497] pnp 00:08: [io 0x0065-0x006f]
- [ 0.144499] pnp 00:08: [io 0x0072-0x007f]
- [ 0.144501] pnp 00:08: [io 0x0080]
- [ 0.144503] pnp 00:08: [io 0x0084-0x0086]
- [ 0.144504] pnp 00:08: [io 0x0088]
- [ 0.144506] pnp 00:08: [io 0x008c-0x008e]
- [ 0.144508] pnp 00:08: [io 0x0090-0x009f]
- [ 0.144510] pnp 00:08: [io 0x00a2-0x00bf]
- [ 0.144511] pnp 00:08: [io 0x00e0-0x00ef]
- [ 0.144513] pnp 00:08: [io 0x04d0-0x04d1]
- [ 0.144515] pnp 00:08: [io 0x0800-0x087f]
- [ 0.144517] pnp 00:08: [io 0x0400-0x03ff disabled]
- [ 0.144519] pnp 00:08: [io 0x0480-0x04bf]
- [ 0.144521] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
- [ 0.144522] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
- [ 0.144524] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
- [ 0.144526] pnp 00:08: [mem 0xffa00000-0xffafffff]
- [ 0.144528] pnp 00:08: [mem 0xffb00000-0xffbfffff]
- [ 0.144530] pnp 00:08: [mem 0xffe00000-0xffefffff]
- [ 0.144532] pnp 00:08: [mem 0xfff00000-0xfffffffe]
- [ 0.144614] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.144617] system 00:08: [io 0x0800-0x087f] has been reserved
- [ 0.144619] system 00:08: [io 0x0480-0x04bf] has been reserved
- [ 0.144622] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.144625] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.144627] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
- [ 0.144629] system 00:08: [mem 0xffa00000-0xffafffff] has been reserved
- [ 0.144632] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.144634] system 00:08: [mem 0xffe00000-0xffefffff] has been reserved
- [ 0.144637] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
- [ 0.144640] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.144696] pnp 00:09: [mem 0xfed00000-0xfed003ff]
- [ 0.144743] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.144961] pnp 00:0a: [irq 4]
- [ 0.144963] pnp 00:0a: [dma 0 disabled]
- [ 0.144965] pnp 00:0a: [io 0x03f8-0x03ff]
- [ 0.145063] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.145103] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
- [ 0.145105] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
- [ 0.145165] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.145168] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.145171] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.145196] pnp 00:0c: [io 0x0060]
- [ 0.145198] pnp 00:0c: [io 0x0064]
- [ 0.145203] pnp 00:0c: [irq 1]
- [ 0.145254] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.145283] pnp 00:0d: [mem 0xe0000000-0xefffffff]
- [ 0.145345] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.145348] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.145482] pnp 00:0e: [mem 0x00000000-0x0009ffff]
- [ 0.145485] pnp 00:0e: [mem 0x000c0000-0x000cffff]
- [ 0.145487] pnp 00:0e: [mem 0x000e0000-0x000fffff]
- [ 0.145489] pnp 00:0e: [mem 0x00100000-0xbfffffff]
- [ 0.145491] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
- [ 0.145561] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.145564] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.145567] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.145569] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
- [ 0.145572] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.145685] pnp: PnP ACPI: found 15 devices
- [ 0.145686] ACPI: ACPI bus type pnp unregistered
- [ 0.180288] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.180302] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.180305] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.180308] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
- [ 0.180311] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.180316] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
- [ 0.180318] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.180322] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.180338] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.180342] pci 0000:00:01.0: setting latency timer to 64
- [ 0.180347] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.180350] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.180353] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.180355] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.180357] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.180359] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.180361] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.180363] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
- [ 0.180365] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.180368] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.180370] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
- [ 0.180372] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
- [ 0.180374] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
- [ 0.180376] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.180378] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.180380] pci_bus 0000:02: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.180404] NET: Registered protocol family 2
- [ 0.180448] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.180609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.180991] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.181187] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.181189] TCP reno registered
- [ 0.181191] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.181197] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.181247] NET: Registered protocol family 1
- [ 0.181328] RPC: Registered named UNIX socket transport module.
- [ 0.181330] RPC: Registered udp transport module.
- [ 0.181331] RPC: Registered tcp transport module.
- [ 0.181333] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.181348] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.181363] pci 0000:00:1a.0: PCI INT A disabled
- [ 0.181374] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.181389] pci 0000:00:1a.1: PCI INT B disabled
- [ 0.181397] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.181411] pci 0000:00:1a.2: PCI INT C disabled
- [ 0.181419] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.181437] pci 0000:00:1a.7: PCI INT C disabled
- [ 0.181447] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.181462] pci 0000:00:1d.0: PCI INT A disabled
- [ 0.181470] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.181485] pci 0000:00:1d.1: PCI INT B disabled
- [ 0.181490] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.181505] pci 0000:00:1d.2: PCI INT C disabled
- [ 0.181512] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.181523] pci 0000:00:1d.7: PCI INT A disabled
- [ 0.181544] pci 0000:01:00.0: Boot video device
- [ 0.181549] PCI: CLS 32 bytes, default 64
- [ 0.188290] highmem bounce pool size: 64 pages
- [ 0.188297] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.201162] DLM installed
- [ 0.201891] Registering the id_resolver key type
- [ 0.202079] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.202230] msgmni has been set to 1708
- [ 0.202521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.202542] io scheduler noop registered
- [ 0.202545] io scheduler deadline registered
- [ 0.202551] io scheduler cfq registered (default)
- [ 0.202640] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.202668] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.202848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.467143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.544782] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.554412] Non-volatile memory driver v1.3
- [ 0.554474] Linux agpgart interface v0.103
- [ 0.557329] vesafb: mode is 1680x1050x32, linelength=6720, pages=1
- [ 0.557331] vesafb: protected mode interface info at c000:b460
- [ 0.557333] vesafb: pmi: set display start = c00cb4c3, set palette = c00cb51e
- [ 0.557335] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
- [ 0.557346] vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2100
- [ 0.557349] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.558484] vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 13781k, total 14336k
- [ 0.601878] Console: switching to colour frame buffer device 210x65
- [ 0.641778] fb0: VESA VGA frame buffer device
- [ 0.641807] intel_idle: MWAIT substates: 0x220
- [ 0.641809] intel_idle: does not run on family 6 model 15
- [ 0.641881] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.641885] ACPI: Power Button [PWRB]
- [ 0.641945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.641948] ACPI: Power Button [PWRF]
- [ 0.643906] [drm] Initialized drm 1.1.0 20060810
- [ 0.644146] Floppy drive(s): fd0 is 1.44M
- [ 0.658669] FDC 0 is a post-1991 82077
- [ 0.661496] brd: module loaded
- [ 0.662494] loop: module loaded
- [ 0.662693] VMware PVSCSI driver - version 1.0.1.0-k
- [ 0.662902] ata_piix 0000:00:1f.2: version 2.13
- [ 0.662920] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 0.662924] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
- [ 0.662956] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.663233] scsi0 : ata_piix
- [ 0.663332] scsi1 : ata_piix
- [ 0.664414] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
- [ 0.664418] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
- [ 0.664435] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 0.664439] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 0.664473] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 0.664747] scsi2 : ata_piix
- [ 0.664842] scsi3 : ata_piix
- [ 0.665822] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
- [ 0.665826] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
- [ 0.666385] 8139too: 8139too Fast Ethernet driver 0.9.28
- [ 0.666400] 8139too 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.666893] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0xf8022c00, 00:0a:cd:09:1c:2d, IRQ 17
- [ 0.666929] PPP generic driver version 2.4.2
- [ 0.667015] NET: Registered protocol family 24
- [ 0.667022] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
- [ 0.667073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.667085] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.667094] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.667098] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.667103] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.667124] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.670995] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.671041] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
- [ 0.680020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.680224] hub 1-0:1.0: USB hub found
- [ 0.680230] hub 1-0:1.0: 6 ports detected
- [ 0.680296] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.680305] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.680308] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.680312] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.680332] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.684210] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.684224] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
- [ 0.694020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.694191] hub 2-0:1.0: USB hub found
- [ 0.694196] hub 2-0:1.0: 6 ports detected
- [ 0.694301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.694337] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.694351] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.694357] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.694360] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.694364] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.694393] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
- [ 0.694542] hub 3-0:1.0: USB hub found
- [ 0.694546] hub 3-0:1.0: 2 ports detected
- [ 0.694593] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.694599] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.694602] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.694606] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.694633] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
- [ 0.694769] hub 4-0:1.0: USB hub found
- [ 0.694773] hub 4-0:1.0: 2 ports detected
- [ 0.694817] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.694823] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 0.694826] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.694830] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.694849] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
- [ 0.694982] hub 5-0:1.0: USB hub found
- [ 0.694986] hub 5-0:1.0: 2 ports detected
- [ 0.695035] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.695041] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.695044] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.695048] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.695067] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
- [ 0.695207] hub 6-0:1.0: USB hub found
- [ 0.695211] hub 6-0:1.0: 2 ports detected
- [ 0.695254] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.695260] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.695262] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.695268] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.695295] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
- [ 0.695429] hub 7-0:1.0: USB hub found
- [ 0.695433] hub 7-0:1.0: 2 ports detected
- [ 0.695477] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.695483] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.695486] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.695490] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.695509] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
- [ 0.695642] hub 8-0:1.0: USB hub found
- [ 0.695646] hub 8-0:1.0: 2 ports detected
- [ 0.695752] usbcore: registered new interface driver usblp
- [ 0.695754] Initializing USB Mass Storage driver...
- [ 0.695806] usbcore: registered new interface driver usb-storage
- [ 0.695808] USB Mass Storage support registered.
- [ 0.695860] usbcore: registered new interface driver libusual
- [ 0.695894] usbcore: registered new interface driver ums-realtek
- [ 0.695993] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.695995] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.696521] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.696597] mousedev: PS/2 mouse device common for all mice
- [ 0.697180] i2c /dev entries driver
- [ 0.697223] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.697227] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
- [ 0.697229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.697267] cpuidle: using governor ladder
- [ 0.697269] cpuidle: using governor menu
- [ 0.697298] wbsd: Winbond W83L51xD SD/MMC card interface driver
- [ 0.697299] wbsd: Copyright(c) Pierre Ossman
- [ 0.697362] usbcore: registered new interface driver ushc
- [ 0.697979] usbcore: registered new interface driver usbhid
- [ 0.697982] usbhid: USB HID core driver
- [ 0.698105] zcache: cleancache enabled using kernel transcendent memory and compression buddies
- [ 0.698394] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 0.698431] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
- [ 0.698454] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 0.709060] hda_codec: ALC883: BIOS auto-probing.
- [ 0.716288] ALSA device list:
- [ 0.716291] #0: HDA Intel at 0xf9ff8000 irq 41
- [ 0.716491] TCP cubic registered
- [ 0.716494] NET: Registered protocol family 17
- [ 0.716885] sctp: Hash tables configured (established 65536 bind 65536)
- [ 0.717025] Registering the dns_resolver key type
- [ 0.717044] Using IPI No-Shortcut mode
- [ 0.726856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 0.980650] ata4: SATA link down (SStatus 0 SControl 300)
- [ 0.982020] usb 1-4: new high-speed USB device number 2 using ehci_hcd
- [ 1.096663] hub 1-4:1.0: USB hub found
- [ 1.096717] hub 1-4:1.0: 4 ports detected
- [ 1.120057] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.120157] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.131054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.134128] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
- [ 1.139228] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
- [ 1.139232] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.140127] ata3.00: configured for UDMA/100
- [ 1.150129] ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
- [ 1.150133] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.159227] ata1.00: configured for UDMA/133
- [ 1.159353] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
- [ 1.159515] sd 0:0:0:0: [sda] 0000000000 000-byte logical blocks: (1.00 TB/931 GiB)
- [ 1.159565] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.159567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.159586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.159589] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.168690] sda: sda1 sda2 sda3
- [ 1.169167] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.184020] Refined TSC clocksource calibration: 2669.789 MHz.
- [ 1.184026] Switching to clocksource tsc
- [ 1.225099] ata2.00: configured for UDMA/133
- [ 1.225202] scsi 1:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
- [ 1.225385] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 1.225424] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.225426] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.225444] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.225447] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.250103] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
- [ 1.273089] sdb: sdb1
- [ 1.273366] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.360787] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.360791] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.360954] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 1.361090] sr 2:0:0:0: Attached scsi generic sg2 type 5
- [ 1.361289] registered taskstats version 1
- [ 1.396865] zcache: created ephemeral tmem pool, id=0, client=65535
- [ 1.396996] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.397010] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- [ 1.410024] usb 5-1: new low-speed USB device number 2 using uhci_hcd
- [ 1.458633] devtmpfs: mounted
- [ 1.458660] Freeing unused kernel memory: 380k freed
- [ 1.458753] Write protecting the kernel text: 5328k
- [ 1.458790] Write protecting the kernel read-only data: 1996k
- [ 1.571977] kworker/u:3 used greatest stack depth: 6764 bytes left
- [ 1.599366] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
- [ 1.599499] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.2-1/input0
- [ 2.371343] cat used greatest stack depth: 6256 bytes left
- [ 2.475885] gzip used greatest stack depth: 6080 bytes left
- [ 2.569667] init-early.sh used greatest stack depth: 5932 bytes left
- [ 3.562058] udevd[1077]: starting version 171
- [ 4.342172] udevd[1114]: renamed network interface eth0 to eth1
- [ 4.694822] nvidia: module license 'NVIDIA' taints kernel.
- [ 4.694826] Disabling lock debugging due to kernel taint
- [ 4.980814] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 4.980823] nvidia 0000:01:00.0: setting latency timer to 64
- [ 4.980827] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 4.980986] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.20 Mon Feb 6 20:25:38 PST 2012
- [ 5.993408] alsactl used greatest stack depth: 5852 bytes left
- [ 7.211855] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
- [ 7.282143] scsi4 : vhba
- [ 7.329189] fuse init (API version 7.17)
- [ 7.778145] zcache: created ephemeral tmem pool, id=1, client=65535
- [ 7.778151] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 7.835172] mount used greatest stack depth: 5696 bytes left
- [ 7.933207] zcache: created ephemeral tmem pool, id=2, client=65535
- [ 7.963156] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 10.495801] coretemp coretemp.0: Using relative temperature scale!
- [ 10.495819] coretemp coretemp.0: Using relative temperature scale!
- [ 10.614843] w83627ehf: Found W83627DHG chip at 0x290
- [ 10.614864] ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
- [ 10.614866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 10.829930] 8139too 0000:02:01.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 11.276262] /dev/vmmon[2124]: Module vmmon: registered with major=10 minor=165
- [ 11.276268] /dev/vmmon[2124]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
- [ 11.276272] /dev/vmmon[2124]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
- [ 11.276275] /dev/vmmon[2124]: Module vmmon: initialized
- [ 11.292846] [2124]: VMCI: shared components initialized.
- [ 11.292883] [2124]: VMCI: host components initialized.
- [ 11.292976] [2124]: VMCI: Module registered (name=vmci,major=10,minor=52).
- [ 11.292979] [2124]: VMCI: Using host personality
- [ 11.292980] [2124]: VMCI: Module (name=vmci) is initialized
- [ 12.130981] /dev/vmnet: open called by PID 2157 (vmnet-bridge)
- [ 12.130988] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 12.131005] /dev/vmnet: port on hub 0 successfully opened
- [ 12.131014] bridge-eth1: up
- [ 12.131023] bridge-eth1: attached
- [ 13.569517] smbd used greatest stack depth: 5488 bytes left
- [ 13.785954] /dev/vmnet: open called by PID 2184 (vmnet-netifup)
- [ 13.785964] /dev/vmnet: hub 1 does not exist, allocating memory.
- [ 13.785986] /dev/vmnet: port on hub 1 successfully opened
- [ 14.657101] /dev/vmnet: open called by PID 2187 (vmnet-dhcpd)
- [ 14.657116] /dev/vmnet: port on hub 1 successfully opened
- [ 15.192649] /dev/vmnet: open called by PID 2192 (vmnet-natd)
- [ 15.192658] /dev/vmnet: hub 8 does not exist, allocating memory.
- [ 15.192676] /dev/vmnet: port on hub 8 successfully opened
- [ 15.269171] userif-3: sent link down event.
- [ 15.269174] userif-3: sent link up event.
- [ 15.270471] /dev/vmnet: open called by PID 2193 (vmnet-netifup)
- [ 15.270481] /dev/vmnet: port on hub 8 successfully opened
- [ 15.669942] /dev/vmnet: open called by PID 2196 (vmnet-dhcpd)
- [ 15.669956] /dev/vmnet: port on hub 8 successfully opened
- [ 43.164732] EXT4-fs (sda1): re-mounted. Opts: commit=0
- [ 43.657144] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 4703.150072] EXT4-fs (sda1): re-mounted. Opts: commit=0
- [ 4703.378275] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 4704.569045] PM: Syncing filesystems ... done.
- [ 4704.575249] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 4704.587027] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 4704.598049] Suspending console(s) (use no_console_suspend to debug)
- [ 4704.598318] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
- [ 4704.598420] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 4704.598498] sd 1:0:0:0: [sdb] Stopping disk
- [ 4704.602798] i8042 kbd 00:0c: wake-up capability enabled by ACPI
- [ 4704.603143] serial 00:0a: disabled
- [ 4704.603148] serial 00:0a: wake-up capability disabled by ACPI
- [ 4704.603317] ata_piix 0000:00:1f.5: PCI INT B disabled
- [ 4704.603339] pci 0000:00:1f.3: PCI INT C disabled
- [ 4704.603396] uhci_hcd 0000:00:1d.2: PCI INT C disabled
- [ 4704.603404] uhci_hcd 0000:00:1d.1: PCI INT B disabled
- [ 4704.603411] uhci_hcd 0000:00:1d.0: PCI INT A disabled
- [ 4704.603497] uhci_hcd 0000:00:1a.2: PCI INT C disabled
- [ 4704.603513] uhci_hcd 0000:00:1a.1: PCI INT B disabled
- [ 4704.603522] uhci_hcd 0000:00:1a.0: PCI INT A disabled
- [ 4704.614099] ehci_hcd 0000:00:1d.7: PCI INT A disabled
- [ 4704.614109] ehci_hcd 0000:00:1a.7: PCI INT C disabled
- [ 4704.658981] sd 0:0:0:0: [sda] Stopping disk
- [ 4704.704101] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
- [ 4704.704130] ACPI handle has no context!
- [ 4707.174950] ata_piix 0000:00:1f.2: PCI INT B disabled
- [ 4707.185042] PM: suspend of devices complete after 2586.807 msecs
- [ 4707.185294] ehci_hcd 0000:00:1d.7: PME# enabled
- [ 4707.185303] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
- [ 4707.196072] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
- [ 4707.196113] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
- [ 4707.196152] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
- [ 4707.196185] ehci_hcd 0000:00:1a.7: PME# enabled
- [ 4707.196191] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
- [ 4707.207062] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
- [ 4707.207101] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
- [ 4707.207140] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
- [ 4707.207174] PM: late suspend of devices complete after 22.128 msecs
- [ 4707.207581] ACPI: Preparing to enter system sleep state S3
- [ 4707.207785] PM: Saving platform NVS memory
- [ 4707.208106] Disabling non-boot CPUs ...
- [ 4707.209326] CPU 1 is now offline
- [ 4707.209721] ACPI: Low-level resume complete
- [ 4707.209721] PM: Restoring platform NVS memory
- [ 4707.209721] Enabling non-boot CPUs ...
- [ 4707.211913] Booting Node 0 Processor 1 APIC 0x1
- [ 4707.211915] smpboot cpu 1: start_ip = 9b000
- [ 4707.209252] Initializing CPU#1
- [ 4707.209252] Calibrating delay loop (skipped) already calibrated this CPU
- [ 4707.245056] CPU1 is up
- [ 4707.246705] ACPI: Waking up from system sleep state S3
- [ 4707.246941] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0xa0100, writing 0xa010b)
- [ 4707.246950] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
- [ 4707.246982] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247013] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
- [ 4707.247034] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247053] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
- [ 4707.247074] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247093] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
- [ 4707.247120] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
- [ 4707.247135] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
- [ 4707.247139] ehci_hcd 0000:00:1a.7: PME# disabled
- [ 4707.247163] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
- [ 4707.247191] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247210] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
- [ 4707.247230] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247250] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
- [ 4707.247270] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
- [ 4707.247289] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
- [ 4707.247316] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
- [ 4707.247330] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
- [ 4707.247334] ehci_hcd 0000:00:1d.7: PME# disabled
- [ 4707.247342] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
- [ 4707.247459] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfeae0000, writing 0x0)
- [ 4707.247468] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
- [ 4707.247605] PM: early resume of devices complete after 0.706 msecs
- [ 4707.247653] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 4707.247658] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 4707.247678] usb usb3: root hub lost power or was reset
- [ 4707.247689] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 4707.247693] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 4707.247712] usb usb4: root hub lost power or was reset
- [ 4707.247720] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 4707.247725] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 4707.247728] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 4707.247731] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 4707.247749] usb usb5: root hub lost power or was reset
- [ 4707.247750] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 4707.247755] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 4707.247759] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 4707.247765] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 4707.247787] usb usb6: root hub lost power or was reset
- [ 4707.247796] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 4707.247798] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
- [ 4707.247801] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 4707.247822] usb usb7: root hub lost power or was reset
- [ 4707.247830] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 4707.247835] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 4707.247849] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 4707.247857] usb usb8: root hub lost power or was reset
- [ 4707.247857] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 4707.247867] pci 0000:00:1e.0: setting latency timer to 64
- [ 4707.247877] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 4707.247879] pci 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 4707.247882] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 4707.247886] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 4707.247890] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 4707.247911] 8139too 0000:02:01.0: eth1: link down
- [ 4707.250665] sd 0:0:0:0: [sda] Starting disk
- [ 4707.250703] sd 1:0:0:0: [sdb] Starting disk
- [ 4707.252655] serial 00:0a: activated
- [ 4707.252663] i8042 kbd 00:0c: wake-up capability disabled by ACPI
- [ 4707.494023] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
- [ 4707.565782] ata4: SATA link down (SStatus 0 SControl 300)
- [ 4707.652005] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445412958999448218 new 18445412955631448246 attempts 1
- [ 4707.756068] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4707.759267] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 4707.759270] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 4707.759273] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 4707.765264] ata3.00: configured for UDMA/100
- [ 4707.860011] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
- [ 4708.250824] 8139too 0000:02:01.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 4710.256014]
- [ 4710.256016] floppy driver state
- [ 4710.256017] -------------------
- [ 4710.256023] now=4410256 last interrupt=4294667955 diff=4709597 last called handler=reset_interrupt
- [ 4710.256026] timeout_message=lock fdc
- [ 4710.256027] last output bytes:
- [ 4710.256029] 0 00 0000000000
- [ 4710.256031] 0 00 0000000000
- [ 4710.256033] 0 00 0000000000
- [ 4710.256034] 0 00 0000000000
- [ 4710.256036] 0 00 0000000000
- [ 4710.256037] 0 00 0000000000
- [ 4710.256039] 0 00 0000000000
- [ 4710.256041] e 80 4294667954
- [ 4710.256042] 00 00 0000000000
- [ 4710.256044] 0 00 0000000000
- [ 4710.256045] 1a 90 4294667954
- [ 4710.256047] 0 00 0000000000
- [ 4710.256049] 00 00 0000000000
- [ 4710.256050] 0 00 0000000000
- [ 4710.256052] 00 00 0000000000
- [ 4710.256053] 00 00 0000000000
- [ 4710.256055] 0 00 0000000000
- [ 4710.256057] 0 00 0000000000
- [ 4710.256058] 0 00 0000000000
- [ 4710.256060] 0 00 0000000000
- [ 4710.256061] last result at 4294667955
- [ 4710.256063] last redo_fd_request at 4294667955
- [ 4710.256069] status=0
- [ 4710.256070] fdc_busy=1
- [ 4710.256072] do_floppy=reset_interrupt
- [ 4710.256074] cont=c15f6328
- [ 4710.256075] current_req= (null)
- [ 4710.256077] command_status=-1
- [ 4710.256078]
- [ 4710.256081] floppy0: floppy timeout called
- [ 4710.572241] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4710.651135] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 4710.651139] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 4710.651215] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 4710.651219] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 4710.764495] ata2.00: configured for UDMA/133
- [ 4712.765017] ata1: link is slow to respond, please be patient (ready=0)
- [ 4716.080048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4716.099123] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 4716.099128] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 4716.099211] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 4716.099215] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 4716.137275] ata1.00: configured for UDMA/133
- [ 4716.173308] PM: resume of devices complete after 8925.675 msecs
- [ 4716.173468] Restarting tasks ...
- [ 4716.173802] bridge-eth1: disabling the bridge
- [ 4716.178041] bridge-eth1: down
- [ 4716.178048] bridge-eth1: detached
- [ 4716.178095] /dev/vmnet: open called by PID 2157 (vmnet-bridge)
- [ 4716.178102] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 4716.178119] /dev/vmnet: port on hub 0 successfully opened
- [ 4716.178128] bridge-eth1: up
- [ 4716.178131] bridge-eth1: attached
- [ 4716.178267] done.
- [ 4716.374122] userif-3: sent link down event.
- [ 4716.374125] userif-3: sent link up event.
- [ 4716.739545] EXT4-fs (sda1): re-mounted. Opts: commit=0
- [ 4717.031409] EXT4-fs (sda3): re-mounted. Opts: commit=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement