Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.03.14 20:54:42 =~=~=~=~=~=~=~=~=~=~=~=
- ÿ¯OÃ ~ ,« QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:10;BOOT:1;INIT:0;READ:0;CHECK:0;EEEE I000000000294EEEE I0000F300F194EEEE I0000F300F194EEEE I0000E300E194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194EEEE I0000F300F194PASS:1;
- -----------------------------------------------------------------------
- * Welcome to Hardkernel's ODROID-C... (Built at 19:33:00 Dec 8 2014) *
- -----------------------------------------------------------------------
- CPU : AMLogic S805
- MEM : 1024MB (DDR3@792MHz)
- BID : HKC1310001
- S/N : HKC11122F37E3DDF
- 0x0000009f
- check SD_boot_type:0x1 card_type:0x1
- Loading U-boot...success.
- U-boot(odroidc@) (Jan 13 2015 - 19:59:14)
- DRAM: 1 GiB
- relocation Offset is: 2ff1c000
- MMC: SDCARD: 0, eMMC: 1
- IR init is done!
- vpu clk_level = 3
- set vpu clk: 182150000Hz, readback: 182150000Hz(0x701)
- mode = 6 vic = 4
- set HDMI vic: 4
- mode is: 6
- viu chan = 1
- config HPLL
- config HPLL done
- reconfig packet setting done
- MMC read: dev # 0, block # 33984, count 12288 ... 12288 blocks read: OK
- There is no valid bmp file at the given address
- ============================================================
- Vendor: Man 035344 Snr 205778a8 Rev: 8.0 Prod: SU32G
- Type: Removable Hard Disk
- Capacity: 30436.5 MB = 29.7 GB (62333952 x 512)
- ------------------------------------------------------------
- Partition Start Sector Num Sectors Type
- 1 3072 131072 6
- 2 134144 6216704 83
- 3 6350848 55982080 83
- ============================================================
- Net: Meson_Ethernet
- init suspend firmware done. (ret:0)
- Hit Enter key to stop autoboot -- : 1 tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- tstc enter
- 0
- exit abortboot: 0
- reading boot.ini
- 1722 bytes read
- Loading boot.ini from mmc0:1 (vfat)
- Executing the script...
- setenv m "1080p" # 1080P 1920x1080
- setenv vout_mode "hdmi"
- setenv m_bpp "32"
- setenv bootargs "console=ttyS0,115200n8 root=UUID=a131ce78-9841-40fe-8823-96a304a09859 rootwait ro no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout_mode} ${disableuhs}"
- fatload mmc 0:1 0x21000000 uImage
- reading uImage
- 5553711 bytes read
- fatload mmc 0:1 0x22000000 uInitrd
- reading uInitrd
- 4304128 bytes read
- fatload mmc 0:1 0x21800000 meson8b_odroidc.dtb
- reading meson8b_odroidc.dtb
- 18594 bytes read
- fdt addr 21800000
- fdt rm /mesonstream
- fdt rm /vdec
- fdt rm /ppmgr
- bootm 0x21000000 0x22000000 0x21800000
- ## Booting kernel from Legacy Image at 21000000 ...
- Image Name: Linux-3.10.80-142
- Image Type: ARM Linux Kernel Image (lzo compressed)
- Data Size: 5553647 Bytes = 5.3 MiB
- Load Address: 00208000
- Entry Point: 00208000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 22000000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 4304064 Bytes = 4.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 21800000
- Booting using the fdt blob at 0x21800000
- Uncompressing Kernel Image ... OK
- uboot time: 5823943 us.
- Using machid 0xf81 from environment
- From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5423001
- Loading Ramdisk to 05008000, end 05422cc0 ... OK
- Loading Device Tree to 05000000, end 050078a1 ... OK
- Starting kernel ...
- [ 0.000000@0] Booting Linux on physical CPU 0x200
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.10.80-142 (root@xu3-b2) (gcc version 4.9.2 (Ubuntu/Linaro 4.9.2-0ubuntu1~14.04) ) #1 SMP PREEMPT Fri Feb 12 06:10:28 BRST 2016
- [ 0.000000@0] Kernel was built at commit id '6496666'
- [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
- [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: ODROIDC, model: AMLOGIC
- [ 0.000000@0] physical memory start address is 0x200000
- [ 0.000000@0] reserved_end is 83fffff
- [ 0.000000@0]
- [ 0.000000@0] Total memory is 1022 MiB
- [ 0.000000@0] Reserved low memory from 0x06000000 to 0x083fffff, size: 36 MiB
- [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
- [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
- [ 0.000000@0] amvideocap0(low) : 0x07a00000 - 0x08400000 ( 10 MiB)
- [ 0.000000@0] cma: CMA: reserved 8 MiB at 3f800000
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
- [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c148c000 s8256 r8192 d16320 u32768
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 247312
- [ 0.000000@0] Kernel command line: console=ttyS0,115200n8 root=UUID=a131ce78-9841-40fe-8823-96a304a09859 rootwait ro no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=1080p m_bpp=32 vout=hdmi
- [ 0.000000@0] cvbs trimming line = 0xa000
- [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
- [ 0.000000@0] osd1:1
- [ 0.000000@0] loaded:268435459
- [ 0.000000@0] logo has been loaded
- [ 0.000000@0] 720p:11
- [ 0.000000@0] full:2
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] kernel get hdmimode form uboot is 1080p
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] allocated 2093056 bytes of page_cgroup
- [ 0.000000@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000@0] Memory: 64MB 16MB 892MB = 972MB total
- [ 0.000000@0] Memory: 958872k/958872k available, 36456k reserved, 260096K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc0937cfc (9408 kB)
- [ 0.000000@0] .init : 0xc0938000 - 0xc0970040 ( 225 kB)
- [ 0.000000@0] .data : 0xc0972000 - 0xc09eab40 ( 483 kB)
- [ 0.000000@0] .bss : 0xc09eab40 - 0xc0c7e6fc (2639 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-F (c098d400) initialized
- [ 0.000000@0] Switching to timer-based delay loop
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.326014@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.336290@0] pid_max: default: 32768 minimum: 301
- [ 0.341262@0] Security Framework initialized
- [ 0.345328@0] AppArmor: AppArmor initialized
- [ 0.349591@0] Mount-cache hash table entries: 512
- [ 0.358372@0] Initializing cgroup subsys memory
- [ 0.358754@0] Initializing cgroup subsys devices
- [ 0.363371@0] Initializing cgroup subsys freezer
- [ 0.367896@0] Initializing cgroup subsys blkio
- [ 0.372347@0] Initializing cgroup subsys perf_event
- [ 0.377296@0] CPU: Testing write buffer coherency: ok
- [ 0.382620@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.388058@0] Setting up static identity map for 0xc0693e40 - 0xc0693e98
- [ 0.394814@0] L310 cache controller enabled
- [ 0.398806@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
- [ 0.406300@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
- [ 0.414399@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
- [ 0.500321@1] CPU1: Booted secondary processor
- [ 0.500339@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.520326@2] CPU2: Booted secondary processor
- [ 0.520344@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
- [ 0.540319@3] CPU3: Booted secondary processor
- [ 0.540337@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
- [ 0.540427@0] Brought up 4 CPUs
- [ 0.568607@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
- [ 0.574833@0] CPU: All CPU(s) started in SVC mode.
- [ 0.580337@0] devtmpfs: initialized
- [ 0.589352@0] clkrate [ xtal ] : 24000000
- [ 0.589384@0] clkrate [ pll_sys ] : 1200000000
- [ 0.592342@0] clkrate [ pll_fixed ] : 2550000000
- [ 0.596994@0] clkrate [ pll_vid ] : 732000000
- [ 0.601421@0] clkrate [ pll_ddr ] : 0
- [ 0.605133@0] clkrate [ a9_clk ] : 1200000000
- [ 0.609549@0] clkrate [ clk81 ] : 159375000
- [ 0.614174@0] pinctrl core: initialized pinctrl subsystem
- [ 0.619371@0] regulator-dummy: no parameters
- [ 0.623933@0] NET: Registered protocol family 16
- [ 0.632040@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.636043@0] VPU driver version: v02
- [ 0.638730@0] load vpu_clk in dts: 182150000Hz(3)
- [ 0.643458@0] vpu_probe OK
- [ 0.647845@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.652044@0] register lm device lm-root
- [ 0.655557@0] register lm device lm1
- [ 0.659105@0] register lm device lm0
- [ 0.662703@0] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.670782@0] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.676828@0] Init pinux probe!
- [ 0.680537@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
- [ 0.685688@0] tv_init_module
- [ 0.688523@0] major number 254 for disp
- [ 0.692344@0] vout_register_server
- [ 0.695703@0] register tv module server ok
- [ 0.699832@0] hdmitx: system: amhdmitx_init
- [ 0.703945@0] hdmitx: system: Ver: 2014May6
- [ 0.708144@0] hdmitx: system: amhdmitx_probe
- [ 0.712616@0] hdmitx: system: gate/pwr cmd: 7
- [ 0.716659@0] hdmitx: system: ALREADY init VIC = 4
- [ 0.721437@0] hdmitx: system: gate/pwr cmd: 0
- [ 0.726170@1] hdmitx: system: reset intr mask
- [ 0.756692@0] bio: create slab <bio-0> at 0
- [ 0.757370@0] SCSI subsystem initialized
- [ 0.759306@0] usbcore: registered new interface driver usbfs
- [ 0.764833@0] usbcore: registered new interface driver hub
- [ 0.770326@0] usbcore: registered new device driver usb
- [ 0.775485@0] media: Linux media interface: v0.10
- [ 0.780148@0] Linux video capture interface: v2.00
- [ 0.785284@0] request vpu clk holdings: venci 106250000Hz
- [ 0.790244@0] TV mode 576cvbs selected.
- [ 0.794034@0] tvoutc_setmode[459]
- [ 0.797321@0] mode is: 8
- [ 0.799833@0] VPU_VIU_VENC_MUX_CTRL: 0x5
- [ 0.803740@0] viu chan = 1
- [ 0.806412@0] VPU_VIU_VENC_MUX_CTRL: 0x5
- [ 0.810318@0] config HPLL
- [ 0.830031@0] config HPLL done
- [ 1.840045@0] vdac open.1 = 0x1, 0x0
- [ 1.840073@0] aml_logo: outputmode changed(11->8), reset osd1 scaler.
- [ 1.923327@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.924365@0] Bluetooth: Core ver 2.16
- [ 1.927712@0] NET: Registered protocol family 31
- [ 1.932298@0] Bluetooth: HCI device and connection manager initialized
- [ 1.938769@0] Bluetooth: HCI socket layer initialized
- [ 1.943811@0] Bluetooth: L2CAP socket layer initialized
- [ 1.948998@0] Bluetooth: SCO socket layer initialized
- [ 1.954161@0] Loading modules backported from Linux version next-20150129-0-g828f79f
- [ 1.961730@0] Backport integrated by backports.git backports-20150129-0-gdd4a670
- [ 1.969290@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.976107@0] Switching to clocksource Timer-E
- [ 1.980345@0] AppArmor: AppArmor Filesystem Enabled
- [ 1.992398@0] NET: Registered protocol family 2
- [ 1.993121@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.998584@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 2.005209@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 2.011629@0] TCP: reno registered
- [ 2.014939@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.021046@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.027694@0] NET: Registered protocol family 1
- [ 2.032216@0] Unpacking initramfs...
- [ 2.276403@0] Freeing initrd memory: 4200K (c4e08000 - c5222000)
- [ 2.277275@0] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
- [ 2.285586@0] audit: initializing netlink socket (disabled)
- [ 2.290600@0] type=2000 audit(2.210:1): initialized
- [ 2.296069@0] bounce pool size: 64 pages
- [ 2.304412@0] VFS: Disk quotas dquot_6.5.2
- [ 2.304655@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.311868@0] aufs 3.10.x
- [ 2.312632@0] msgmni has been set to 1373
- [ 2.318072@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 2.324317@0] io scheduler noop registered
- [ 2.328207@0] io scheduler deadline registered
- [ 2.332770@0] io scheduler cfq registered (default)
- [ 2.381229@0] [drm] Initialized drm 1.1.0 20060810
- [ 2.381386@0] gpu cooling register okay with err=0
- [ 2.387993@0] Mali: Mali device driver loaded
- [ 2.389628@0] UMP: UMP device driver -jenkins-deb_kernel_c1-142 loaded
- [ 2.398807@0] loop: module loaded
- [ 2.399783@0] tun: Universal TUN/TAP device driver, 1.6
- [ 2.404498@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.410939@0] PPP generic driver version 2.4.2
- [ 2.415534@0] usbcore: registered new interface driver usb-storage
- [ 2.421480@0] usbcore: registered new interface driver usbserial
- [ 2.427346@0] usbcore: registered new interface driver usbserial_generic
- [ 2.434042@0] usbserial: USB Serial support registered for generic
- [ 2.440406@0] mousedev: PS/2 mouse device common for all mice
- [ 2.446090@0] i2c /dev entries driver
- [ 2.449834@0] device-mapper: uevent: version 1.0.3
- [ 2.454541@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.462985@0] Bluetooth: HCI UART driver ver 2.2
- [ 2.467408@0] Bluetooth: HCI H4 protocol initialized
- [ 2.472361@0] Bluetooth: HCI BCSP protocol initialized
- [ 2.477451@0] Bluetooth: HCILL protocol initialized
- [ 2.482320@0] Bluetooth: HCIATH3K protocol initialized
- [ 2.487409@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
- [ 2.494460@0] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.500144@0] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.505837@0] usbcore: registered new interface driver usbhid
- [ 2.511331@0] usbhid: USB HID core driver
- [ 2.515501@0] efuse===========================================
- [ 2.521269@0] efuse: device efuse created
- [ 2.525121@0] efuse--------------------------------------------
- [ 2.530983@0] vout_init_module
- [ 2.534023@0] start init vout module
- [ 2.537748@0] create vout attribute ok
- [ 2.541792@0] ge2d_init
- [ 2.544128@0] ge2d_dev major:244
- [ 2.547556@0] ge2d start monitor
- [ 2.550808@0] osd_init
- [ 2.550820@1] ge2d workqueue monitor start
- [ 2.557247@0] osd_probe, vinfo:c06d3f28
- [ 2.561357@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
- [ 2.569149@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d3f28
- [ 2.574715@0] init fbdev bpp is :32
- [ 2.578239@0] ---------------clear framebuffer0 memory
- [ 2.613285@0] Console: switching to colour frame buffer device 160x90
- [ 2.626416@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
- [ 2.634355@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d3f28
- [ 2.639875@0] don't find to display_size_default from mesonfb-dts
- [ 2.645959@0] init fbdev bpp is :24
- [ 2.660133@0] osd probe ok
- [ 2.660160@0] hdmitx: video: get current mode: 576cvbs
- [ 2.662583@0] hdmitx: edid: not find mapped vic
- [ 2.667081@0] hdmitx: hpd: HPD deassert!
- [ 2.720387@0] amlvideo-000: V4L2 device registered as video10
- [ 2.720719@0] ionvideo-000: V4L2 device registered as video13
- [ 2.726209@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
- [ 2.734721@0] aml_wdt_driver_init,306
- [ 2.738243@0] ** disable watchdog
- [ 2.741638@0] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
- [ 2.757625@0] AML Watchdog Timer probed done
- [ 2.762029@0] set uart_ao pinmux use pinctrl subsystem
- [ 2.766818@0] P_AO_RTI_PIN_MUX_REG:1801
- [ 2.770669@0] start uart_ao_ttyS0:(irq = 122)
- [ 2.774958@0] register uart_ao ok
- [ 2.778468@0] set uart_b pinmux use pinctrl subsystem
- [ 2.783296@0] P_AO_RTI_PIN_MUX_REG:1801
- [ 2.787095@0] start uart_b_ttyS2:(irq = 107)
- [ 2.791375@0] register uart_b ok
- [ 2.794601@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 2.799147@0] dwc_otg_driver_probe NOT match
- [ 2.843415@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- [ 2.846387@0] USB (1) use clock source: XTAL input
- [ 2.872350@0] Core Release: 3.10a
- [ 2.872384@0] Setting default values for core params
- [ 2.874974@0] curmode: 1, host_only: 1
- [ 2.898846@0] Using Buffer DMA mode
- [ 2.898874@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.901226@0] Working on port type = HOST
- [ 2.905420@0] dwc_otg lm1: DWC OTG Controller
- [ 2.909549@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 2.916233@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 2.921145@0] -------hcd->flags.d32 = 0
- [ 2.924947@0] Init: Port Power? op_state=1
- [ 2.928998@0] Init1: Power Port (0)
- [ 2.932989@0] hub 1-0:1.0: USB hub found
- [ 2.936372@0] hub 1-0:1.0: 1 port detected
- [ 2.940646@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
- [ 2.949009@0] USB (0) use clock source: XTAL input
- [ 2.974884@0] Core Release: 3.10a
- [ 2.974912@0] Setting default values for core params
- [ 2.977506@0] curmode: 1, host_only: 0
- [ 3.041385@0] Using Buffer DMA mode
- [ 3.041412@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.043742@0] Working on port type = OTG
- [ 3.047638@0] Current port type: SLAVE
- [ 3.051603@0] dwc_otg lm0: DWC OTG Controller
- [ 3.055721@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 3.062412@0] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 3.067723@0] hub 2-0:1.0: USB hub found
- [ 3.071223@0] hub 2-0:1.0: 1 port detected
- [ 3.075391@0] Dedicated Tx FIFOs mode
- [ 3.079270@0] using timer detect id change, ef596400
- [ 3.084009@0] ethernet_driver probe!
- [ 3.087396@0] ethernetinit(dbg[c09c52ec]=1)
- [ 3.091587@0] ethernet base addr is fe0c0000
- [ 3.095814@0] write mac add to:ef5e7bc8: 00 1e 06 10 61 5f |..a_|
- [ 3.113286@0] libphy: AMLMAC MII Bus: probed
- [ 3.113321@0] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
- [ 3.117638@0] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
- [ 3.123595@0] amvideocap_init_module
- [ 3.126999@0] amvideocap_probe,amvideocap
- [ 3.130914@0] amvideocap_dev_register buf:07a00000,size:a00000.
- [ 3.137143@0] [tsync_pcr_init]init success.
- [ 3.141119@1] Indeed it is in host mode hprt0 = 00021501
- [ 3.141132@0] regist mpeg12 codec profile
- [ 3.141174@0] regist mpeg4 codec profile
- [ 3.141176@0] amvdec_vc1 module init
- [ 3.141216@0] regist vc1 codec profile
- [ 3.141218@0] amvdec_h264 module init
- [ 3.141291@0] regist h264 codec profile
- [ 3.141293@0] amvdec_h265 module init
- [ 3.141334@0] regist hevc codec profile
- [ 3.141374@0] regist mjpeg codec profile
- [ 3.141376@0] amvdec_real module init
- [ 3.141416@0] regist real codec profile
- [ 3.141418@0] amvdec_avs module init
- [ 3.141578@0] regist avc codec profile
- [ 3.141579@0] jpegenc module init
- [ 3.141767@0] alloc_keep_buffer keep_y_addr ee600000
- [ 3.141841@0] alloc_keep_buffer keep_u_addr eeb00000
- [ 3.141868@0] alloc_keep_buffer keep_v_addr eec00000
- [ 3.141886@0] yaddr=ee600000,u_addr=eeb00000,v_addr=eec00000
- [ 3.218856@0] create_ge2d_work_queue video task ok
- [ 3.223835@0] SARADC Driver init.
- [ 3.226932@0] __saradc_probe__
- [ 3.370156@0] saradc calibration: ref_val = 508
- [ 3.370186@0] saradc calibration: ref_nominal = 512
- [ 3.373897@0] saradc calibration: coef = 4048
- [ 3.378442@0] ir irblaster probe
- [ 3.381675@0] Remote Driver
- [ 3.384289@0] ==touch_ts_init==
- [ 3.387395@0] ==ft5x0x_ts_init==
- [ 3.390610@0] ==goodix_ts_init==
- [ 3.393773@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
- [ 3.400050@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.400325@3] Indeed it is in host mode hprt0 = 00001101
- [ 3.412921@0] i2c-core: driver [gslx680_compatible] using legacy resume method
- [ 3.420098@0] !!!ntp_ts: ret = 0.
- [ 3.423458@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
- [ 3.429861@0] i2c-core: driver [ct36x] using legacy suspend method
- [ 3.436000@0] i2c-core: driver [ct36x] using legacy resume method
- [ 3.442090@0] VTL ct36x TouchScreen driver End.
- [ 3.446545@0] ==gsl_ts_init==
- [ 3.449518@0] ret=0
- [ 3.451755@0] i2c-core: driver [mir3da] using legacy suspend method
- [ 3.457802@0] i2c-core: driver [mir3da] using legacy resume method
- [ 3.464035@0] i2c-core: driver [lis3dh_acc] using legacy suspend method
- [ 3.470550@0] i2c-core: driver [lis3dh_acc] using legacy resume method
- [ 3.477074@0] i2c-core: driver [bma222] using legacy suspend method
- [ 3.483321@2] i2c-core: driver [bma222] using legacy resume method
- [ 3.489471@2] i2c-core: driver [dmard06] using legacy suspend method
- [ 3.495748@2] i2c-core: driver [dmard06] using legacy resume method
- [ 3.502003@2] lsm303d driver: init
- [ 3.505385@2] i2c-core: driver [dmard10] using legacy suspend method
- [ 3.511675@2] i2c-core: driver [dmard10] using legacy resume method
- [ 3.517922@2] stk8313_init
- [ 3.520619@2] ======stk831x init ok======
- [ 3.524561@2] stk831x_init
- [ 3.527270@2] mxc622x accelerometer driver: init
- [ 3.531876@2] i2c-core: driver [mxc622x] using legacy suspend method
- [ 3.538156@2] i2c-core: driver [mxc622x] using legacy resume method
- [ 3.544428@2] mxc6255xc accelerometer driver: init
- [ 3.549180@2] i2c-core: driver [mxc6255xc] using legacy suspend method
- [ 3.555672@2] i2c-core: driver [mxc6255xc] using legacy resume method
- [ 3.562150@2] cm3217 v.1.0.0.1
- [ 3.565108@2] i2c-core: driver [elan_epl6814] using legacy suspend method
- [ 3.571856@2] i2c-core: driver [elan_epl6814] using legacy resume method
- [ 3.578533@2] i2c-core: driver [LTR501] using legacy suspend method
- [ 3.584757@2] i2c-core: driver [LTR501] using legacy resume method
- [ 3.591022@2] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
- [ 3.592155@3] hub 1-1:1.0: USB hub found
- [ 3.592490@3] hub 1-1:1.0: 4 ports detected
- [ 3.607123@2] host->base fe108e00
- [ 3.609502@2] pdata->caps 78107
- [ 3.612583@2] pdata->caps2 0
- [ 3.615395@2] get property: port, value:0x00000004
- [ 3.621904@2] get property: ocr_avail, value:0x00200080
- [ 3.628382@2] get property: f_min, value:0x000493e0
- [ 3.634891@2] get property: f_max, value:0x05f5e100
- [ 3.641384@2] get property: max_req_size, value:0x00020000
- [ 3.647864@2] get property: irq_in, value:0x00000003
- [ 3.654404@2] get property: irq_out, value:0x00000005
- [ 3.660875@2] get property: gpio_cd, str:CARD_6
- [ 3.666829@2] get property: pinname, str:sd
- [ 3.672470@2] get property: card_type, value:0x00000005
- [ 3.678951@2] get property: gpio_dat3, str:CARD_4
- [ 3.684939@2] get property: gpio_volsw, str:GPIOAO_3
- [ 3.691248@2] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
- [ 3.750059@1] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 3.772115@1] aml_sd_voltage_switch[1309] : Switched to voltage -> 1.80 V
- [ 3.804439@1] sd: new ultra high speed SDR50 SDHC card at address aaaa, clock 94444444, 4-bit-bus-width
- [ 3.808536@1] mmcblk0: sd:aaaa SU32G 29.7 GiB
- [ 3.810046@2] [aml_sdhc_probe] aml_sdhc_probe() success!
- [ 3.818390@2] host->base fe108c20
- [ 3.819134@1] mmcblk0: p1 p2 p3
- [ 3.824441@2] pdata->caps 80000507
- [ 3.827753@2] pdata->caps2 1
- [ 3.830627@2] get property: port, value:0x00000002
- [ 3.837102@2] get property: ocr_avail, value:0x00200000
- [ 3.843611@2] get property: f_min, value:0x000493e0
- [ 3.850106@2] get property: f_max, value:0x02faf080
- [ 3.856584@2] get property: f_max_w, value:0x02faf080
- [ 3.863091@2] get property: max_req_size, value:0x00020000
- [ 3.869578@2] get property: pinname, str:emmc
- [ 3.875414@2] get property: card_type, value:0x00000001
- [ 3.881889@2] get property: gpio_dat3, str:BOOT_3
- [ 3.887844@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
- [ 3.930058@1] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 3.931205@1] aml_emmc_hw_reset 1379
- [ 3.990030@2] [aml_sdio_probe] aml_sdio_probe() success!
- [ 3.990152@2] [dsp]DSP start addr 0xc5e00000
- [ 3.993972@2] [dsp]register dsp to char divece(257)
- [ 3.999784@2] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
- [ 4.006287@2] amlogic rfkill init
- [ 4.008224@2] Bluetooth: btwake_control_init Driver Ver 1.1
- [ 4.014051@2] aml_hw_crypto initialization.
- [ 4.018957@2] pcm5102_platform_probe
- [ 4.021742@2] i2s get no clk src setting in dts, use the default mpll 0
- [ 4.028278@2] enter spdif_dit_probe
- [ 4.031547@2] aml_spdif_unmute
- [ 4.035583@2] aml-i2s 0:playback preallocate_dma_buffer: area=f04e8000, addr=3fc40000, size=65536
- [ 4.043841@2] aml-i2s 1:capture preallocate_dma_buffer: area=f04fa000, addr=3fc60000, size=65536
- [ 4.052261@2] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
- [ 4.061076@2] GACT probability NOT on
- [ 4.063742@2] Mirror/redirect action on
- [ 4.068131@2] NET: Registered protocol family 10
- [ 4.072869@2] mip6: Mobile IPv6
- [ 4.075254@2] sit: IPv6 over IPv4 tunneling driver
- [ 4.080931@2] NET: Registered protocol family 17
- [ 4.084629@2] NET: Registered protocol family 15
- [ 4.089257@2] Bridge firewalling registered
- [ 4.093563@2] Bluetooth: RFCOMM TTY layer initialized
- [ 4.098394@2] Bluetooth: RFCOMM socket layer initialized
- [ 4.103676@2] Bluetooth: RFCOMM ver 1.11
- [ 4.107552@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.113019@2] Bluetooth: BNEP filters: protocol multicast
- [ 4.118382@2] Bluetooth: BNEP socket layer initialized
- [ 4.123499@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.129550@2] Bluetooth: HIDP socket layer initialized
- [ 4.134689@2] NET: Registered protocol family 35
- [ 4.139659@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
- [ 4.147050@2] Registering SWP/SWPB emulation handler
- [ 4.152112@2] pm-meson: probe of aml_pm_m8 failed with error -1
- [ 4.158294@2] registered taskstats version 1
- [ 4.162183@2] regulator-dummy: disabling
- [ 4.166217@2] Mali DRM initialize, driver name: mali_drm, version 2.1
- [ 4.172719@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
- [ 4.178569@2] Mali DRM initialize, driver name: mali_drm, version 2.1
- [ 4.185188@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
- [ 4.191701@2] aml_rtc rtc.1: setting system clock to 1970-01-01 00:00:00 UTC (0)
- [ 4.198487@2] ### dt-test ### No testcase data in device tree; not running tests
- [ 4.205964@2] meson_cpufreq_probe:SYSPLL request to be fixed
- [ 4.211474@2] meson_cpufreq: no voltage_control prop
- [ 4.216391@2] voltage_control = 0
- [ 4.220544@2] <<-GTP-INFO->> GTP driver installing...
- [ 4.224888@2] buf[0]=f6,buf[1]=af,err=4
- [ 4.228515@2] adc=383,TS_C=22,flag=1
- [ 4.232079@2] efuse_flag=a
- [ 4.234749@2] amlogic_thermal_probe, this chip is trimmed, use thermal
- [ 4.241258@2] amlogic-thermal aml_thermal: amlogic thermal probe start
- [ 4.247738@2] #thermal-cells=7
- [ 4.250777@2] pdata->temp_trip_count=4
- [ 4.254492@2] temperature=70 on trip point=0
- [ 4.258732@2] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
- [ 4.265486@2] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
- [ 4.272165@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- [ 4.278561@2] cpu[0] core num==3
- [ 4.281775@2] gpu[0] core num==2
- [ 4.284969@2] temperature=80 on trip point=1
- [ 4.289211@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
- [ 4.295965@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
- [ 4.302644@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
- [ 4.309040@2] cpu[1] core num==2
- [ 4.312274@2] gpu[1] core num==2
- [ 4.315448@2] temperature=90 on trip point=2
- [ 4.319690@2] fixing high_freq=800001 to 696000 at trip point 2,level=11
- [ 4.326358@2] fixing low_freq=800001 to 696000 at trip point 2,level=11
- [ 4.332940@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- [ 4.339346@2] cpu[2] core num==1
- [ 4.342561@2] gpu[2] core num==1
- [ 4.345754@2] temperature=110 on trip point=3
- [ 4.350095@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
- [ 4.356144@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
- [ 4.362130@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
- [ 4.368353@2] cpu[3] core num==-1
- [ 4.371653@2] gpu[3] core num==-1
- [ 4.374935@2] idle interval=1000
- [ 4.378138@2] pdata->name:aml_thermal
- [ 4.381991@2] tmp_trip[0].cpu_core_upper=1
- [ 4.385854@2] tmp_trip[1].cpu_core_upper=2
- [ 4.389921@2] tmp_trip[2].cpu_core_upper=3
- [ 4.394008@2] tmp_trip[3].cpu_core_upper=-1
- [ 4.398153@2] aml_thermal bind thermal-cpucore-0 okay !
- [ 4.403382@2] aml_thermal bind thermal-cpufreq-0 okay !
- [ 4.408533@2] pdata->tmp_trip[0].gpu_lower_level=1
- [ 4.413305@2] pdata->tmp_trip[0].gpu_upper_level=1
- [ 4.418065@2] pdata->tmp_trip[1].gpu_lower_level=2
- [ 4.422847@2] pdata->tmp_trip[1].gpu_upper_level=2
- [ 4.427590@2] pdata->tmp_trip[2].gpu_lower_level=4
- [ 4.432355@2] pdata->tmp_trip[2].gpu_upper_level=4
- [ 4.437114@2] pdata->tmp_trip[3].gpu_lower_level=-1
- [ 4.441964@2] pdata->tmp_trip[3].gpu_upper_level=-1
- [ 4.446812@2] aml_thermal bind thermal-gpufreq-0 okay !
- [ 4.452134@2] amlogic: Kernel Thermal management registered
- [ 4.457543@2] amlogic-thermal aml_thermal: amlogic thermal probe done
- [ 4.464006@2] hdmitx: cec: CEC init
- [ 4.467493@1] hdmitx: cec: CEC task process
- [ 4.467630@2] input: cec_input as /devices/virtual/input/input0
- [ 4.477559@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
- [ 4.482[ 4.500040@2] Changing uart_ao_ttyS0: baud from 0 to 115200
- [ 4.520223@2] Freeing unused kernel memory: 224K (c0938000 - c0970000)
- Loading, please wait...
- [ 4.565054@0] udevd[108]: starting version 175
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... mdadm: No arrays found in config file or automatically
- Failure: failed to assemble all arrays.
- done.
- done.
- Begin: Running /scripts/local-premount ... done.
- [ 5.085739@1] force enable DISCARD here for ext4 fs
- [ 5.086916@1] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- [ 5.092557@1] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- [ 5.145491@1] EXT4-fs (mmcblk0p2): recovery complete
- [ 5.148481@1] checked enable EXT4 DISCARD here
- [ 5.149251@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
- [ 5.158909@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- Using makefile-style concurrent boot in runlevel S.
- Starting the hotplug events dispatcher: udevd[ 5.920894@1] udevd[311]: starting version 175
- .
- Synthesizing the initial hotplug events...done.
- Waiting for /dev to be fully populated...[ 6.119934@0] aml_gpio_probe : success
- [ 6.207548@3] Driver for 1-wire Dallas network protocol.
- [ 6.540749@3] amlvideo open[ 6.540781@3] ionvideo open
- amlvideo close[ 6.540988@3] ionvideo_stop_generating!!!!
- [ 6.541002@3] ionvideo release
- done.
- Setting parameters of disc: (none).
- Setting preliminary keymap...done.
- Activating swap...done.
- [ 7.134357@1] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- Checking root file system...fsck from util-linux 2.20.1
- wheezy: clean, 46077/196608 files, 322406/777088 blocks
- done.
- [ 7.261258@3] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
- Cleaning up temporary files... /tmp.
- Assembling MD arrays...done (no arrays found in config file or automatically).
- Setting up LVM Volume Groups... No volume groups found
- No volume groups found
- done.
- [ 7.941848@2] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
- [ 7.980049@2] aml_emmc_hw_reset 1379
- Activating lvm and md swap...done.
- Checking file systems...fsck from util-linux 2.20.1
- done.
- Mounting local filesystems...[ 8.857514@3] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- done.
- Activating swapfile swap...done.
- fs2ram: mount and execute the mount script for each handled mountpoints...tar: ./memory-year.png: time stamp 2016-03-13 17:00:15 is 1457910007.877017 s in the future
- tar: ./memory-month.png: time stamp 2016-03-13 17:00:15 is 1457910007.873774 s in the future
- tar: ./memory-week.png: time stamp 2016-03-13 17:00:15 is 1457910007.871781 s in the future
- tar: ./memory-day.png: time stamp 2016-03-13 17:00:14 is 1457910006.871382 s in the future
- tar: ./memory-hour.png: time stamp 2016-03-13 17:00:14 is 1457910006.870913 s in the future
- tar: ./load-year.png: time stamp 2016-03-13 17:00:09 is 1457910001.869931 s in the future
- tar: ./load-month.png: time stamp 2016-03-13 17:00:09 is 1457910001.866449 s in the future
- tar: ./load-week.png: time stamp 2016-03-13 17:00:08 is 1457910000.866084 s in the future
- tar: ./load-day.png: time stamp 2016-03-13 17:00:08 is 1457910000.865718 s in the future
- tar: ./load-hour.png: time stamp 2016-03-13 17:00:08 is 1457910000.86534 s in the future
- tar: ./df-root-year.png: time stamp 2016-03-13 17:00:05 is 1457909997.865034 s in the future
- tar: ./df-root-month.png: time stamp 2016-03-13 17:00:04 is 1457909996.864747 s in the future
- tar: ./df-root-week.png: time stamp 2016-03-13 17:00:04 is 1457909996.864468 s in the future
- tar: ./df-root-day.png: time stamp 2016-03-13 17:00:04 is 1457909996.864162 s in the future
- tar: ./df-root-hour.png: time stamp 2016-03-13 17:00:04 is 1457909996.862929 s in the future
- tar: ./cpu-0-year.png: time stamp 2016-03-13 17:00:04 is 1457909996.862651 s in the future
- tar: ./cpu-0-month.png: time stamp 2016-03-13 17:00:04 is 1457909996.859546 s in the future
- tar: ./cpu-0-week.png: time stamp 2016-03-13 17:00:04 is 1457909996.859175 s in the future
- tar: ./cpu-0-day.png: time stamp 2016-03-13 17:00:04 is 1457909996.858879 s in the future
- tar: ./cpu-0-hour.png: time stamp 2016-03-13 17:00:03 is 1457909995.858374 s in the future
- tar: .: time stamp 2016-03-13 17:00:15 is 1457910007.858126 s in the future
- tar: ./postfix/defer: time stamp 2015-01-17 12:15:54 is 1421522146.786772 s in the future
- tar: ./postfix/dev/random: time stamp 2015-01-17 12:15:58 is 1421522150.783714 s in the future
- tar: ./postfix/dev/urandom: time stamp 2015-01-17 12:15:58 is 1421522150.780765 s in the future
- tar: ./postfix/dev: time stamp 2016-03-13 17:09:53 is 1457910585.77914 s in the future
- tar: ./postfix/hold: time stamp 2015-01-17 12:15:58 is 1421522150.778393 s in the future
- tar: ./postfix/bounce: time stamp 2015-01-17 12:15:54 is 1421522146.778097 s in the future
- tar: ./postfix/maildrop/742A61C6D: time stamp 2015-02-05 19:37:25 is 1423190237.777286 s in the future
- tar: ./postfix/maildrop/5DC871E: time stamp 1969-12-31 17:16:01 is 953.776906 s in the future
- tar: ./postfix/maildrop: time stamp 2015-02-05 19:37:25 is 1423190237.775614 s in the future
- tar: ./postfix/private: time stamp 2015-01-17 12:15:58 is 1421522150.774942 s in the future
- tar: ./postfix/saved: time stamp 2015-01-17 12:15:54 is 1421522146.774776 s in the future
- tar: ./postfix/flush: time stamp 2015-01-17 12:15:54 is 1421522146.774396 s in the future
- tar: ./postfix/pid/master.pid: time stamp 2015-01-17 12:15:58 is 1421522150.77324 s in the future
- tar: ./postfix/pid: time stamp 2015-01-17 12:15:58 is 1421522150.773023 s in the future
- tar: ./postfix/etc/nsswitch.conf: time stamp 2015-01-17 12:15:58 is 1421522150.772329 s in the future
- tar: ./postfix/etc/ssl/certs/ca-certificates.crt: time stamp 2015-01-17 12:15:58 is 1421522150.763521 s in the future
- tar: ./postfix/etc/ssl/certs: time stamp 2015-01-17 12:15:58 is 1421522150.763257 s in the future
- tar: ./postfix/etc/ssl: time stamp 2015-01-17 12:15:58 is 1421522150.763094 s in the future
- tar: ./postfix/etc/hosts: time stamp 2015-01-17 12:15:58 is 1421522150.761547 s in the future
- tar: ./postfix/etc/services: time stamp 2015-01-17 12:15:58 is 1421522150.761219 s in the future
- tar: ./postfix/etc/localtime: time stamp 2015-01-17 12:15:58 is 1421522150.760917 s in the future
- tar: ./postfix/etc/resolv.conf: time stamp 2015-01-17 12:15:58 is 1421522150.760658 s in the future
- tar: ./postfix/etc: time stamp 2015-01-17 12:15:58 is 1421522150.760475 s in the future
- tar: ./postfix/usr/lib/sasl2: time stamp 2013-03-11 21:08:14 is 1363057686.760255 s in the future
- tar: ./postfix/active: time stamp 2015-01-17 12:15:54 is 1421522146.759752 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_dns-2.13.so: time stamp 2014-10-16 20:50:20 is 1413514212.759399 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_nis.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.75793 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_hesiod.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.757755 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_dns.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.757594 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_compat-2.13.so: time stamp 2014-10-16 20:50:20 is 1413514212.757278 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_hesiod-2.13.so: time stamp 2014-10-16 20:50:20 is 1413514212.756999 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_files.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.756813 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_files-2.13.so: time stamp 2014-10-16 20:50:19 is 1413514211.755163 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libresolv-2.13.so: time stamp 2014-10-16 20:50:20 is 1413514212.752519 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libresolv.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.752284 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_compat.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.752112 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_nis-2.13.so: time stamp 2014-10-16 20:50:21 is 1413514213.751781 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_nisplus-2.13.so: time stamp 2014-10-16 20:50:20 is 1413514212.750127 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libnss_nisplus.so.2: time stamp 2014-10-16 20:49:49 is 1413514181.7499 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf/libgcc_s.so.1: time stamp 2013-01-08 06:59:24 is 1357653556.747492 s in the future
- tar: ./postfix/lib/arm-linux-gnueabihf: time stamp 2015-01-17 12:15:58 is 1421522150.747131 s in the future
- tar: ./postfix/lib: time stamp 2015-01-17 12:15:58 is 1421522150.74699 s in the future
- tar: ./postfix/corrupt: time stamp 2015-01-17 12:15:54 is 1421522146.746827 s in the future
- tar: ./postfix/trace: time stamp 2015-01-17 12:15:58 is 1421522150.746674 s in the future
- tar: ./postfix/incoming: time stamp 2015-01-17 12:15:54 is 1421522146.746399 s in the future
- tar: ./postfix/public/pickup: time stamp 2015-01-17 12:25:59 is 1421522751.746207 s in the future
- tar: ./postfix/public/qmgr: time stamp 2015-01-17 12:25:58 is 1421522750.746046 s in the future
- tar: ./postfix/public: time stamp 2015-01-17 12:15:58 is 1421522150.745836 s in the future
- tar: ./postfix/deferred: time stamp 2015-01-17 12:15:54 is 1421522146.745603 s in the future
- tar: ./rsyslog: time stamp 2014-10-07 15:53:20 is 1412718792.745374 s in the future
- tar: ./cron/crontabs: time stamp 2012-07-03 15:42:28 is 1341351740.744945 s in the future
- tar: ./cron: time stamp 2015-01-17 12:19:39 is 1421522371.744769 s in the future
- tar: ./samba: time stamp 2014-06-22 06:40:07 is 1403440799.744606 s in the future
- tar: ./anacron/cron.monthly: time stamp 2015-01-17 12:43:16 is 1421523788.744391 s in the future
- tar: ./anacron/cron.daily: time stamp 2016-03-13 17:04:16 is 1457910248.744199 s in the future
- tar: ./anacron/cron.weekly: time stamp 2015-02-05 19:37:25 is 1423190237.744023 s in the future
- tar: ./anacron: time stamp 1969-12-31 17:00:20 is 12.743836 s in the future
- tar: ./postfix/usr/lib/zoneinfo/localtime: time stamp 2015-01-17 12:15:58 is 1421522150.743646 s in the future
- tar: ./mail: time stamp 2015-01-17 11:51:22 is 1421520674.743465 s in the future
- tar: ./postfix/usr/lib/zoneinfo: time stamp 2015-01-17 12:15:58 is 1421522150.743339 s in the future
- tar: ./postfix/usr/lib: time stamp 2015-01-17 12:15:46 is 1421522138.743221 s in the future
- tar: ./postfix/usr: time stamp 2015-01-17 12:15:46 is 1421522138.743101 s in the future
- tar: ./postfix: time stamp 2015-01-17 12:15:58 is 1421522150.742989 s in the future
- tar: .: time stamp 2015-01-17 12:21:20 is 1421522472.742879 s in the future
- tar: ./journal: time stamp 2016-03-13 17:09:45 is 1457910577.690257 s in the future
- tar: ./db/localhost/cpu-1/cpu-steal.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.687065 s in the future
- tar: ./db/localhost/cpu-1/cpu-softirq.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.684231 s in the future
- tar: ./db/localhost/cpu-1/cpu-user.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.681363 s in the future
- tar: ./db/localhost/cpu-1/cpu-interrupt.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.679047 s in the future
- tar: ./db/localhost/cpu-1/cpu-nice.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.676441 s in the future
- tar: ./db/localhost/cpu-1/cpu-wait.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.673354 s in the future
- tar: ./db/localhost/cpu-1/cpu-idle.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.670206 s in the future
- tar: ./db/localhost/cpu-1/cpu-system.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.667619 s in the future
- tar: ./db/localhost/cpu-1: time stamp 2015-01-17 12:26:39 is 1421522791.667476 s in the future
- tar: ./db/localhost/memory/memory-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.66454 s in the future
- tar: ./db/localhost/memory/memory-buffered.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.662011 s in the future
- tar: ./db/localhost/memory/memory-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.658972 s in the future
- tar: ./db/localhost/memory/memory-cached.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.656502 s in the future
- tar: ./db/localhost/memory: time stamp 2015-01-17 12:26:39 is 1421522791.656363 s in the future
- tar: ./db/localhost/interface-sit0/if_packets.rrd: time stamp 2016-03-13 17:09:45 is 145791[ 11.701675@0] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
- 0577.651246 s in the future
- tar: ./db/localhost/interface-sit0/if_octets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.646101 s in the future
- tar: ./db/localhost/interface-sit0/if_errors.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.64098 s in the future
- tar: ./db/localhost/interface-sit0: time stamp 2015-01-17 12:26:39 is 1421522791.640835 s in the future
- tar: ./db/localhost/df-root/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.637901 s in the future
- tar: ./db/localhost/df-root/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.635404 s in the future
- tar: ./db/localhost/df-root/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.632447 s in the future
- tar: ./db/localhost/df-root: time stamp 2015-01-17 12:26:39 is 1421522791.632309 s in the future
- tar: ./db/localhost/df-run-lock/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.629746 s in the future
- tar: ./db/localhost/df-run-lock/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.626837 s in the future
- tar: ./db/localhost/df-run-lock/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.62384 s in the future
- tar: ./db/localhost/df-run-lock: time stamp 2015-01-17 12:26:39 is 1421522791.623706 s in the future
- tar: ./db/localhost/interface-eth0/if_packets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.617986 s in the future
- tar: ./db/localhost/interface-eth0/if_octets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.612785 s in the future
- tar: ./db/localhost/interface-eth0/if_errors.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.607549 s in the future
- tar: ./db/localhost/interface-eth0: time stamp 2015-01-17 12:26:39 is 1421522791.607402 s in the future
- tar: ./db/localhost/df-run-shm/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.604875 s in the future
- tar: ./db/localhost/df-run-shm/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.601959 s in the future
- tar: ./db/localhost/df-run-shm/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.599425 s in the future
- tar: ./db/localhost/df-run-shm: time stamp 2015-01-17 12:26:39 is 1421522791.599283 s in the future
- tar: ./db/localhost/interface-ip6tnl0/if_packets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.593844 s in the future
- tar: ./db/localhost/interface-ip6tnl0/if_octets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.588633 s in the future
- tar: ./db/localhost/interface-ip6tnl0/if_errors.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.583538 s in the future
- tar: ./db/localhost/interface-ip6tnl0: time stamp 2015-01-17 12:26:39 is 1421522791.583396 s in the future
- tar: ./db/localhost/df-run/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.580839 s in the future
- tar: ./db/localhost/df-run/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.577899 s in the future
- tar: ./db/localhost/df-run/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.575384 s in the future
- tar: ./db/localhost/df-run: time stamp 2015-01-17 12:26:39 is 1421522791.575246 s in the future
- tar: ./db/localhost/interface-lo/if_packets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.570029 s in the future
- tar: ./db/localhost/interface-lo/if_octets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.564918 s in the future
- tar: ./db/localhost/interface-lo/if_errors.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.559704 s in the future
- tar: ./db/localhost/interface-lo: time stamp 2015-01-17 12:26:39 is 1421522791.559558 s in the future
- tar: ./db/localhost/df-dev/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.556673 s in the future
- tar: ./db/localhost/df-dev/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.554166 s in the future
- tar: ./db/localhost/df-dev/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.551195 s in the future
- tar: ./db/localhost/df-dev: time stamp 2015-01-17 12:26:39 is 1421522791.551053 s in the future
- tar: ./db/localhost/rrdcached/gauge-tree_depth.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.548564 s in the future
- tar: ./db/localhost/rrdcached/operations-receive-flush.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.54561 s in the future
- tar: ./db/localhost/rrdcached/operations-write-data_sets.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.542661 s in the future
- tar: ./db/localhost/rrdcached/counter-journal-bytes.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.540051 s in the future
- tar: ./db/localhost/rrdcached/operations-write-updates.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.537093 s in the future
- tar: ./db/localhost/rrdcached/operations-receive-update.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.534564 s in the future
- tar: ./db/localhost/rrdcached/counter-journal-rotates.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.531592 s in the future
- tar: ./db/localhost/rrdcached/queue_length.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.529052 s in the future
- tar: ./db/localhost/rrdcached/gauge-tree_nodes.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.526138 s in the future
- tar: ./db/localhost/rrdcached: time stamp 2015-01-17 12:26:59 is 1421522811.526001 s in the future
- tar: ./db/localhost/cpu-2/cpu-steal.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.523516 s in the future
- tar: ./db/localhost/cpu-2/cpu-softirq.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.52041 s in the future
- tar: ./db/localhost/cpu-2/cpu-user.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.517488 s in the future
- tar: ./db/localhost/cpu-2/cpu-interrupt.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.514811 s in the future
- tar: ./db/localhost/cpu-2/cpu-nice.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.511868 s in the future
- tar: ./db/localhost/cpu-2/cpu-wait.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.509376 s in the future
- tar: ./db/localhost/cpu-2/cpu-idle.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.506441 s in the future
- tar: ./db/localhost/cpu-2/cpu-system.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.503929 s in the future
- tar: ./db/localhost/cpu-2: time stamp 2015-01-17 12:26:39 is 1421522791.503789 s in the future
- tar: ./db/localhost/cpu-0/cpu-steal.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.500815 s in the future
- tar: ./db/localhost/cpu-0/cpu-softirq.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.498341 s in the future
- tar: ./db/localhost/cpu-0/cpu-user.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.495456 s in the future
- tar: ./db/localhost/cpu-0/cpu-interrupt.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.492699 s in the future
- tar: ./db/localhost/cpu-0/cpu-nice.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.490261 s in the future
- tar: ./db/localhost/cpu-0/cpu-wait.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.487417 s in the future
- tar: ./db/localhost/cpu-0/cpu-idle.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.484985 s in the future
- tar: ./db/localhost/cpu-0/cpu-system.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.482079 s in the future
- tar: ./db/localhost/cpu-0: time stamp 2015-01-17 12:26:39 is 1421522791.481965 s in the future
- tar: ./db/localhost/load/load.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.474707 s in the future
- tar: ./db/localhost/load: time stamp 2015-01-17 12:26:39 is 1421522791.474578 s in the future
- tar: ./db/localhost/df-tmp/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.471797 s in the future
- tar: ./db/localhost/df-tmp/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.469388 s in the future
- tar: ./db/localhost/df-tmp/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.466424 s in the future
- tar: ./db/localhost/df-tmp: time stamp 2015-01-17 12:26:39 is 1421522791.466297 s in the future
- tar: ./db/localhost/df-media-boot/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.463809 s in the future
- tar: ./db/localhost/df-media-boot/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.460846 s in the future
- tar: ./db/localhost/df-media-boot/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.458366 s in the future
- tar: ./db/localhost/df-media-boot: time stamp 2015-01-17 12:26:39 is 1421522791.458242 s in the future
- tar: ./db/localhost/cpu-3/cpu-steal.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.455215 s in the future
- tar: ./db/localhost/cpu-3/cpu-softirq.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.452173 s in the future
- tar: ./db/localhost/cpu-3/cpu-user.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.449555 s in the future
- tar: ./db/localhost/cpu-3/cpu-interrupt.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.446592 s in the future
- tar: ./db/localhost/cpu-3/cpu-nice.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.444082 s in the future
- tar: ./db/localhost/cpu-3/cpu-wait.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.441043 s in the future
- tar: ./db/localhost/cpu-3/cpu-idle.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.437914 s in the future
- tar: ./db/localhost/cpu-3/cpu-system.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.434313 s in the future
- tar: ./db/localhost/cpu-3: time stamp 2015-01-17 12:26:39 is 1421522791.434138 s in the future
- tar: ./db/localhost/df-var-cache/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.431503 s in the future
- tar: ./db/localhost/df-var-cache/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.428466 s in the future
- tar: ./db/localhost/df-var-cache/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.425471 s in the future
- tar: ./db/localhost/df-var-cache: time stamp 2015-03-10 12:06:12 is 1426010764.425341 s in the future
- tar: ./db/localhost/df-var-log/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.422833 s in the future
- tar: ./db/localhost/df-var-log/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.419817 s in the future
- tar: ./db/localhost/df-var-log/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.417264 s in the future
- tar: ./db/localhost/df-var-log: time stamp 2015-03-10 12:06:12 is 1426010764.41712 s in the future
- tar: ./db/localhost/df-var-tmp/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.414143 s in the future
- tar: ./db/localhost/df-var-tmp/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.41157 s in the future
- tar: ./db/localhost/df-var-tmp/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.40862 s in the future
- tar: ./db/localhost/df-var-tmp: time stamp 2015-03-10 12:06:13 is 1426010765.408493 s in the future
- tar: ./db/localhost/df-var-lib-openmediavault-rrd/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.405553 s in the future
- tar: ./db/localhost/df-var-lib-openmediavault-rrd/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.40303 s in the future
- tar: ./db/localhost/df-var-lib-openmediavault-rrd/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.400008 s in the future
- tar: ./db/localhost/df-var-lib-openmediavault-rrd: time stamp 2015-03-10 12:06:13 is 1426010765.399869 s in the future
- tar: ./db/localhost/df-var-spool/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.397368 s in the future
- tar: ./db/localhost/df-var-spool/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.394428 s in the future
- tar: ./db/localhost/df-var-spool/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.391915 s in the future
- tar: ./db/localhost/df-var-spool: time stamp 2015-03-10 12:06:13 is 1426010765.391788 s in the future
- tar: ./db/localhost/df-var-lib-rrdcached/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.389049 s in the future
- tar: ./db/localhost/df-var-lib-rrdcached/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.386607 s in the future
- tar: ./db/localhost/df-var-lib-rrdcached/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.383825 s in the future
- tar: ./db/localhost/df-var-lib-rrdcached: time stamp 2015-03-10 12:06:13 is 1426010765.383677 s in the future
- tar: ./db/localhost/df-var-lib-monit/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.380314 s in the future
- tar: ./db/localhost/df-var-lib-monit/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.377342 s in the future
- tar: ./db/localhost/df-var-lib-monit/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.374482 s in the future
- tar: ./db/localhost/df-var-lib-monit: time stamp 2015-03-10 12:06:13 is 1426010765.374353 s in the future
- tar: ./db/localhost/df-var-lib-php5/df_complex-free.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.37192 s in the future
- tar: ./db/localhost/df-var-lib-php5/df_complex-reserved.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.369053 s in the future
- tar: ./db/localhost/df-var-lib-php5/df_complex-used.rrd: time stamp 2016-03-13 17:09:45 is 1457910577.366705 s in the future
- tar: ./db/localhost/df-var-lib-php5: time stamp 2015-03-10 12:06:13 is 1426010765.365653 s in the future
- tar: ./db/localhost: time stamp 2015-03-10 12:06:13 is 1426010765.365542 s in the future
- tar: ./db: time stamp 2015-01-17 12:26:39 is 1421522791.365474 s in the future
- tar: .: time stamp 2015-01-17 12:24:51 is 1421522683.365412 s in the future
- tar: ./state: time stamp 2016-03-13 17:09:14 is 1457910546.334411 s in the future
- tar: ./id: time stamp 2015-01-17 12:24:07 is 1421522639.333951 s in the future
- tar: ./events: time stamp 2012-06-01 06:07:12 is 1338552424.33373 s in the future
- tar: .: time stamp 2016-03-13 16:59:21 is 1457909953.333601 s in the future
- done.
- Cleaning up temporary files....
- Cleaning up...done.
- Setting kernel variables ...done.
- Setting up resolvconf...done.
- Configuring network interfaces...[ 13.206938@0] netdev_open
- [ 13.206963@0] Ethernet reset
- [ 13.206997@0] NET MDA descpter start addr=ee100000
- [ 13.266611@0] phy_interface = 0
- [ 13.266646@0] aml_phy_init: trying to attach to 0:01
- [ 13.269323@0] am_rtl811f called phy reset
- [ 13.290134@0] --1--write mac add to:ef5e7bc8: 00 1e 06 10 61 5f |..a_|
- [ 13.291362@0] --2--write mac add to:ef5e7bc8: 00 1e 06 10 61 5f |..a_|
- [ 13.298049@0] write mac add to:ef5e7bc8: 00 1e 06 10 61 5f |..a_|
- [ 13.304304@0] Current DMA mode=0, set mode=621c100
- [ 13.319107@0] ether leave promiscuous mode
- [ 13.319130@0] ether leave all muticast mode
- [ 13.321977@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- done.
- Starting rpcbind daemon....
- Starting NFS common utilities: statd[ 14.482905@2] RPC: Registered named UNIX socket transport module.
- [ 14.483643@2] RPC: Registered udp transport module.
- [ 14.488225@2] RPC: Registered tcp transport module.
- [ 14.493121@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 14.507710@0] Key type dns_resolver registered
- [ 14.556987@1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- idmapd.
- Cleaning up temporary files....
- Setting console screen modes.
- setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
- [9;30][14;30]Skipping font and keymap setup (handled by console-setup).
- Setting up console font and keymap...done.
- Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- Starting rpcbind daemon...Already running..
- Starting NFS common utilities: statd idmapd.
- [ 15.536290@3] ** enable watchdog
- FATAL: Module softdog not found.
- Starting watchdog keepalive daemon: wd_keepalive.
- Starting RRDtool data caching daemon: rrdcached.
- Starting enhanced syslogd: rsyslogd.
- Starting ACPI services...RTNETLINK1 answers: No such file or directory
- acpid: error talking to the kernel via netlink
- .
- Starting anac(h)ronistic cron: anacron.
- Starting MD monitoring service: mdadm --monitor.
- Loading cpufreq kernel modules...done (none).
- Starting periodic command scheduler: cron.
- Autostarting btsync instance 'openmediavault': missing /etc/btsync/openmediavault.conf file ! ... failed!
- Config file openmediavault.conf found in /etc/btsync - Nothing to start ... (warning).
- Starting Samba daemons: nmbd smbd.
- CPUFreq Utilities: Setting conservative CPUFreq governor...CPU0...CPU1...CPU2...CPU3...done.
- Starting system message bus: dbus.
- Starting nginx: nginx.
- Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- saned disabled; edit /etc/default/saned
- Starting OpenBSD Secure Shell server: sshd.
- Starting statistics collection and monitoring daemon: collectd.
- Starting OpenMediaVault engine daemon: omv-engined.
- Starting Plex Media Server: done
- Starting NTP server: ntpdQA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:10;BOOT:1;INIT:0;READ:0;CHECK:0;PASS:1;
- -----------------------------------------------------------------------
- * Welcome to Hardkernel's ODROID-C... (Built at 19:33:00 Dec 8 2014) *
- -----------------------------------------------------------------------
- CPU : AMLogic S805
- MEM : 1024MB (DDR3@792MHz)
- BID : HKC1310001
- S/N : HKC11122F37E3DDF
- 0x0000009f
- check SD_boot_type:0x1 card_type:0x1
- Loading U-boot...success.
- U-boot(odroidc@) (Jan 13 2015 - 19:59:14)
- DRAM: 1 GiB
- relocation Offset is: 2ff1c000
- MMC: SDCARD: 0, eMMC: 1
- IR init is done!
- vpu clk_level = 3
- set vpu clk: 182150000Hz, readback: 182150000Hz(0x701)
- mode = 6 vic = 4
- set HDMI vic: 4
- mode is: 6
- viu chan = 1
- config HPLL
- config HPLL done
- reconfig packet setting done
- MMC read: dev # 0, block # 33984, count 12288 ... 12288 blocks read: OK
- There is no valid bmp file at the given address
- ============================================================
- Vendor: Man 035344 Snr 205778a8 Rev: 8.0 Prod: SU32G
- Type: Removable Hard Disk
- Capacity: 30436.5 MB = 29.7 GB (62333952 x 512)
- ------------------------------------------------------------
- Partition Start Sector Num Sectors Type
- 1 3072 131072 6
- 2 134144 6216704 83
- 3 6350848 55982080 83
- ============================================================
- Net: Meson_Ethernet
- init suspend firmware done. (ret:0)
- Hit Enter key to stop autoboot -- : 1 0
- exit abortboot: 0
- reading boot.ini
- 1722 bytes read
- Loading boot.ini from mmc0:1 (vfat)
- Executing the script...
- setenv m "1080p" # 1080P 1920x1080
- setenv vout_mode "hdmi"
- setenv m_bpp "32"
- setenv bootargs "console=ttyS0,115200n8 root=UUID=a131ce78-9841-40fe-8823-96a304a09859 rootwait ro no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout_mode} ${disableuhs}"
- fatload mmc 0:1 0x21000000 uImage
- reading uImage
- 5553711 bytes read
- fatload mmc 0:1 0x22000000 uInitrd
- reading uInitrd
- 4304128 bytes read
- fatload mmc 0:1 0x21800000 meson8b_odroidc.dtb
- reading meson8b_odroidc.dtb
- 18594 bytes read
- fdt addr 21800000
- fdt rm /mesonstream
- fdt rm /vdec
- fdt rm /ppmgr
- bootm 0x21000000 0x22000000 0x21800000
- ## Booting kernel from Legacy Image at 21000000 ...
- Image Name: Linux-3.10.80-142
- Image Type: ARM Linux Kernel Image (lzo compressed)
- Data Size: 5553647 Bytes = 5.3 MiB
- Load Address: 00208000
- Entry Point: 00208000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 22000000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 4304064 Bytes = 4.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 21800000
- Booting using the fdt blob at 0x21800000
- Uncompressing Kernel Image ... OK
- uboot time: 5478886 us.
- Using machid 0xf81 from environment
- From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5423001
- Loading Ramdisk to 05008000, end 05422cc0 ... OK
- Loading Device Tree to 05000000, end 050078a1 ... OK
- Starting kernel ...
- [ 0.000000@0] Booting Linux on physical CPU 0x200
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.10.80-142 (root@xu3-b2) (gcc version 4.9.2 (Ubuntu/Linaro 4.9.2-0ubuntu1~14.04) ) #1 SMP PREEMPT Fri Feb 12 06:10:28 BRST 2016
- [ 0.000000@0] Kernel was built at commit id '6496666'
- [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
- [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: ODROIDC, model: AMLOGIC
- [ 0.000000@0] physical memory start address is 0x200000
- [ 0.000000@0] reserved_end is 83fffff
- [ 0.000000@0]
- [ 0.000000@0] Total memory is 1022 MiB
- [ 0.000000@0] Reserved low memory from 0x06000000 to 0x083fffff, size: 36 MiB
- [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
- [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
- [ 0.000000@0] amvideocap0(low) : 0x07a00000 - 0x08400000 ( 10 MiB)
- [ 0.000000@0] cma: CMA: reserved 8 MiB at 3f800000
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
- [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c148c000 s8256 r8192 d16320 u32768
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 247312
- [ 0.000000@0] Kernel command line: console=ttyS0,115200n8 root=UUID=a131ce78-9841-40fe-8823-96a304a09859 rootwait ro no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=1080p m_bpp=32 vout=hdmi
- [ 0.000000@0] cvbs trimming line = 0xa000
- [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
- [ 0.000000@0] osd1:1
- [ 0.000000@0] loaded:268435459
- [ 0.000000@0] logo has been loaded
- [ 0.000000@0] 720p:11
- [ 0.000000@0] full:2
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] kernel get hdmimode form uboot is 1080p
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] allocated 2093056 bytes of page_cgroup
- [ 0.000000@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000@0] Memory: 64MB 16MB 892MB = 972MB total
- [ 0.000000@0] Memory: 958872k/958872k available, 36456k reserved, 260096K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc0937cfc (9408 kB)
- [ 0.000000@0] .init : 0xc0938000 - 0xc0970040 ( 225 kB)
- [ 0.000000@0] .data : 0xc0972000 - 0xc09eab40 ( 483 kB)
- [ 0.000000@0] .bss : 0xc09eab40 - 0xc0c7e6fc (2639 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-F (c098d400) initialized
- [ 0.000000@0] Switching to timer-based delay loop
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.326024@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.336301@0] pid_max: default: 32768 minimum: 301
- [ 0.341283@0] Security Framework initialized
- [ 0.345340@0] AppArmor: AppArmor initialized
- [ 0.349604@0] Mount-cache hash table entries: 512
- [ 0.358437@0] Initializing cgroup subsys memory
- [ 0.358764@0] Initializing cgroup subsys devices
- [ 0.363386@0] Initializing cgroup subsys freezer
- [ 0.367905@0] Initializing cgroup subsys blkio
- [ 0.372360@0] Initializing cgroup subsys perf_event
- [ 0.377313@0] CPU: Testing write buffer coherency: ok
- [ 0.382653@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.388069@0] Setting up static identity map for 0xc0693e40 - 0xc0693e98
- [ 0.394835@0] L310 cache controller enabled
- [ 0.398816@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
- [ 0.406311@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
- [ 0.414409@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
- [ 0.500322@1] CPU1: Booted secondary processor
- [ 0.500339@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.520327@2] CPU2: Booted secondary processor
- [ 0.520345@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
- [ 0.540317@3] CPU3: Booted secondary processor
- [ 0.540335@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
- [ 0.540424@0] Brought up 4 CPUs
- [ 0.568604@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
- [ 0.574830@0] CPU: All CPU(s) started in SVC mode.
- [ 0.580343@0] devtmpfs: initialized
- [ 0.589325@0] clkrate [ xtal ] : 24000000
- [ 0.589358@0] clkrate [ pll_sys ] : 1200000000
- [ 0.592317@0] clkrate [ pll_fixed ] : 2550000000
- [ 0.596967@0] clkrate [ pll_vid ] : 732000000
- [ 0.601395@0] clkrate [ pll_ddr ] : 0
- [ 0.605107@0] clkrate [ a9_clk ] : 1200000000
- [ 0.609523@0] clkrate [ clk81 ] : 159375000
- [ 0.614162@0] pinctrl core: initialized pinctrl subsystem
- [ 0.619343@0] regulator-dummy: no parameters
- [ 0.623891@0] NET: Registered protocol family 16
- [ 0.632136@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.636017@0] VPU driver version: v02
- [ 0.638704@0] load vpu_clk in dts: 182150000Hz(3)
- [ 0.643429@0] vpu_probe OK
- [ 0.647820@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.652016@0] register lm device lm-root
- [ 0.655531@0] register lm device lm1
- [ 0.659078@0] register lm device lm0
- [ 0.662676@0] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.670755@0] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.676803@0] Init pinux probe!
- [ 0.680514@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
- [ 0.685662@0] tv_init_module
- [ 0.688496@0] major number 254 for disp
- [ 0.692319@0] vout_register_server
- [ 0.695677@0] register tv module server ok
- [ 0.699807@0] hdmitx: system: amhdmitx_init
- [ 0.703920@0] hdmitx: system: Ver: 2014May6
- [ 0.708119@0] hdmitx: system: amhdmitx_probe
- [ 0.712586@0] hdmitx: system: gate/pwr cmd: 7
- [ 0.716633@0] hdmitx: system: ALREADY init VIC = 4
- [ 0.721411@0] hdmitx: system: gate/pwr cmd: 0
- [ 0.726145@1] hdmitx: system: reset intr mask
- [ 0.756674@0] bio: create slab <bio-0> at 0
- [ 0.757349@0] SCSI subsystem initialized
- [ 0.759288@0] usbcore: registered new interface driver usbfs
- [ 0.764814@0] usbcore: registered new interface driver hub
- [ 0.770308@0] usbcore: registered new device driver usb
- [ 0.775468@0] media: Linux media interface: v0.10
- [ 0.780131@0] Linux video capture interface: v2.00
- [ 0.785267@0] request vpu clk holdings: venci 106250000Hz
- [ 0.790226@0] TV mode 576cvbs selected.
- [ 0.794024@0] tvoutc_setmode[459]
- [ 0.797304@0] mode is: 8
- [ 0.799815@0] VPU_VIU_VENC_MUX_CTRL: 0x5
- [ 0.803722@0] viu chan = 1
- [ 0.806395@0] VPU_VIU_VENC_MUX_CTRL: 0x5
- [ 0.810301@0] config HPLL
- [ 0.830032@0] config HPLL done
- [ 1.840045@0] vdac open.1 = 0x1, 0x0
- [ 1.840073@0] aml_logo: outputmode changed(11->8), reset osd1 scaler.
- [ 1.923327@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.924364@0] Bluetooth: Core ver 2.16
- [ 1.927711@0] NET: Registered protocol family 31
- [ 1.932297@0] Bluetooth: HCI device and connection manager initialized
- [ 1.938769@0] Bluetooth: HCI socket layer initialized
- [ 1.943811@0] Bluetooth: L2CAP socket layer initialized
- [ 1.948998@0] Bluetooth: SCO socket layer initialized
- [ 1.954162@0] Loading modules backported from Linux version next-20150129-0-g828f79f
- [ 1.961730@0] Backport integrated by backports.git backports-20150129-0-gdd4a670
- [ 1.969290@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.976103@0] Switching to clocksource Timer-E
- [ 1.980346@0] AppArmor: AppArmor Filesystem Enabled
- [ 1.992433@0] NET: Registered protocol family 2
- [ 1.993158@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.998618@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 2.005245@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 2.011668@0] TCP: reno registered
- [ 2.014975@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.021083@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.027733@0] NET: Registered protocol family 1
- [ 2.032249@0] Unpacking initramfs...
- [ 2.276658@0] Freeing initrd memory: 4200K (c4e08000 - c5222000)
- [ 2.277529@0] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
- [ 2.285833@0] audit: initializing netlink socket (disabled)
- [ 2.290893@0] type=2000 audit(2.210:1): initialized
- [ 2.296320@0] bounce pool size: 64 pages
- [ 2.304835@0] VFS: Disk quotas dquot_6.5.2
- [ 2.305077@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.312131@0] aufs 3.10.x
- [ 2.312888@0] msgmni has been set to 1373
- [ 2.318369@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 2.324457@0] io scheduler noop registered
- [ 2.328462@0] io scheduler deadline registered
- [ 2.333022@0] io scheduler cfq registered (default)
- [ 2.382358@0] [drm] Initialized drm 1.1.0 20060810
- [ 2.382516@0] gpu cooling register okay with err=0
- [ 2.389093@0] Mali: Mali device driver loaded
- [ 2.390796@0] UMP: UMP device driver -jenkins-deb_kernel_c1-142 loaded
- [ 2.399914@0] loop: module loaded
- [ 2.400947@0] tun: Universal TUN/TAP device driver, 1.6
- [ 2.405587@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.412064@0] PPP generic driver version 2.4.2
- [ 2.416663@0] usbcore: registered new interface driver usb-storage
- [ 2.422616@0] usbcore: registered new interface driver usbserial
- [ 2.428476@0] usbcore: registered new interface driver usbserial_generic
- [ 2.435161@0] usbserial: USB Serial support registered for generic
- [ 2.441534@0] mousedev: PS/2 mouse device common for all mice
- [ 2.447217@0] i2c /dev entries driver
- [ 2.450988@0] device-mapper: uevent: version 1.0.3
- [ 2.455644@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.464115@0] Bluetooth: HCI UART driver ver 2.2
- [ 2.468537@0] Bluetooth: HCI H4 protocol initialized
- [ 2.473489@0] Bluetooth: HCI BCSP protocol initialized
- [ 2.478580@0] Bluetooth: HCILL protocol initialized
- [ 2.483451@0] Bluetooth: HCIATH3K protocol initialized
- [ 2.488538@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
- [ 2.495586@0] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.501268@0] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.506955@0] usbcore: registered new interface driver usbhid
- [ 2.512457@0] usbhid: USB HID core driver
- [ 2.516625@0] efuse===========================================
- [ 2.522396@0] efuse: device efuse created
- [ 2.526252@0] efuse--------------------------------------------
- [ 2.532113@0] vout_init_module
- [ 2.535153@0] start init vout module
- [ 2.538877@0] create vout attribute ok
- [ 2.542921@0] ge2d_init
- [ 2.545258@0] ge2d_dev major:244
- [ 2.548688@0] ge2d start monitor
- [ 2.551944@0] osd_init
- [ 2.551956@1] ge2d workqueue monitor start
- [ 2.558378@0] osd_probe, vinfo:c06d3f28
- [ 2.562476@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
- [ 2.570303@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d3f28
- [ 2.575820@0] init fbdev bpp is :32
- [ 2.579368@0] ---------------clear framebuffer0 memory
- [ 2.613284@0] Console: switching to colour frame buffer device 160x90
- [ 2.626417@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
- [ 2.634355@0] osd_probe, mydef_var:c09c06d0, vinfo:c06d3f28
- [ 2.639875@0] don't find to display_size_default from mesonfb-dts
- [ 2.645960@0] init fbdev bpp is :24
- [ 2.660133@0] osd probe ok
- [ 2.660161@0] hdmitx: video: get current mode: 576cvbs
- [ 2.662583@0] hdmitx: edid: not find mapped vic
- [ 2.667081@0] hdmitx: hpd: HPD deassert!
- [ 2.720389@0] amlvideo-000: V4L2 device registered as video10
- [ 2.720719@0] ionvideo-000: V4L2 device registered as video13
- [ 2.726211@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
- [ 2.734724@0] aml_wdt_driver_init,306
- [ 2.738246@0] ** disable watchdog
- [ 2.741644@0] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
- [ 2.757628@0] AML Watchdog Timer probed done
- [ 2.762032@0] set uart_ao pinmux use pinctrl subsystem
- [ 2.766821@0] P_AO_RTI_PIN_MUX_REG:1801
- [ 2.770672@0] start uart_ao_ttyS0:(irq = 122)
- [ 2.774960@0] register uart_ao ok
- [ 2.778472@0] set uart_b pinmux use pinctrl subsystem
- [ 2.783299@0] P_AO_RTI_PIN_MUX_REG:1801
- [ 2.787097@0] start uart_b_ttyS2:(irq = 107)
- [ 2.791377@0] register uart_b ok
- [ 2.794601@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 2.799151@0] dwc_otg_driver_probe NOT match
- [ 2.843418@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- [ 2.846391@0] USB (1) use clock source: XTAL input
- [ 2.872354@0] Core Release: 3.10a
- [ 2.872389@0] Setting default values for core params
- [ 2.874978@0] curmode: 1, host_only: 1
- [ 2.898851@0] Using Buffer DMA mode
- [ 2.898879@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.901232@0] Working on port type = HOST
- [ 2.905428@0] dwc_otg lm1: DWC OTG Controller
- [ 2.909556@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 2.916239@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 2.921152@0] -------hcd->flags.d32 = 0
- [ 2.924952@0] Init: Port Power? op_state=1
- [ 2.929003@0] Init1: Power Port (0)
- [ 2.932990@0] hub 1-0:1.0: USB hub found
- [ 2.936376@0] hub 1-0:1.0: 1 port detected
- [ 2.940651@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
- [ 2.949015@0] USB (0) use clock source: XTAL input
- [ 2.974891@0] Core Release: 3.10a
- [ 2.974919@0] Setting default values for core params
- [ 2.977513@0] curmode: 1, host_only: 0
- [ 3.041394@0] Using Buffer DMA mode
- [ 3.041421@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.043751@0] Working on port type = OTG
- [ 3.047647@0] Current port type: SLAVE
- [ 3.051607@0] dwc_otg lm0: DWC OTG Controller
- [ 3.055730@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 3.062419@0] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 3.067728@0] hub 2-0:1.0: USB hub found
- [ 3.071241@0] hub 2-0:1.0: 1 port detected
- [ 3.075401@0] Dedicated Tx FIFOs mode
- [ 3.079276@0] using timer detect id change, ef5ae400
- [ 3.084011@0] ethernet_driver probe!
- [ 3.087406@0] ethernetinit(dbg[c09c52ec]=1)
- [ 3.091595@0] ethernet base addr is fe0c0000
- [ 3.095825@0] write mac add to:ef5e7bc8: 00 1e 06 10 61 5f |..a_|
- [ 3.113282@0] libphy: AMLMAC MII Bus: probed
- [ 3.113318@0] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
- [ 3.117636@0] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
- [ 3.123582@0] amvideocap_init_module
- [ 3.126997@0] amvideocap_probe,amvideocap
- [ 3.130911@0] amvideocap_dev_register buf:07a00000,size:a00000.
- [ 3.137142@0] [tsync_pcr_init]init success.
- [ 3.141118@1] Indeed it is in host mode hprt0 = 00021501
- [ 3.141132@0] regist mpeg12 codec profile
- [ 3.141175@0] regist mpeg4 codec profile
- [ 3.141177@0] amvdec_vc1 module init
- [ 3.141217@0] regist vc1 codec profile
- [ 3.141219@0] amvdec_h264 module init
- [ 3.141292@0] regist h264 codec profile
- [ 3.141294@0] amvdec_h265 module init
- [ 3.141334@0] regist hevc codec profile
- [ 3.141374@0] regist mjpeg codec profile
- [ 3.141376@0] amvdec_real module init
- [ 3.141415@0] regist real codec profile
- [ 3.141417@0] amvdec_avs module init
- [ 3.141576@0] regist avc codec profile
- [ 3.141578@0] jpegenc module init
- [ 3.141770@0] alloc_keep_buffer keep_y_addr ee600000
- [ 3.141844@0] alloc_keep_buffer keep_u_addr eeb00000
- [ 3.141871@0] alloc_keep_buffer keep_v_addr eec00000
- [ 3.141890@0] yaddr=ee600000,u_addr=eeb00000,v_addr=eec00000
- [ 3.218869@0] create_ge2d_work_queue video task ok
- [ 3.223835@0] SARADC Driver init.
- [ 3.226931@0] __saradc_probe__
- [ 3.370156@0] saradc calibration: ref_val = 507
- [ 3.370186@0] saradc calibration: ref_nominal = 512
- [ 3.373897@0] saradc calibration: coef = 4040
- [ 3.378437@0] ir irblaster probe
- [ 3.381676@0] Remote Driver
- [ 3.384290@0] ==touch_ts_init==
- [ 3.387394@0] ==ft5x0x_ts_init==
- [ 3.390611@0] ==goodix_ts_init==
- [ 3.393773@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
- [ 3.400050@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.400325@3] Indeed it is in host mode hprt0 = 00001101
- [ 3.412919@0] i2c-core: driver [gslx680_compatible] using legacy resume method
- [ 3.420098@0] !!!ntp_ts: ret = 0.
- [ 3.423459@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
- [ 3.429861@0] i2c-core: driver [ct36x] using legacy suspend method
- [ 3.436026@0] i2c-core: driver [ct36x] using legacy resume method
- [ 3.442098@2] VTL ct36x TouchScreen driver End.
- [ 3.446545@2] ==gsl_ts_init==
- [ 3.449529@2] ret=0
- [ 3.451751@2] i2c-core: driver [mir3da] using legacy suspend method
- [ 3.457802@2] i2c-core: driver [mir3da] using legacy resume method
- [ 3.463996@2] i2c-core: driver [lis3dh_acc] using legacy suspend method
- [ 3.470548@2] i2c-core: driver [lis3dh_acc] using legacy resume method
- [ 3.477073@2] i2c-core: driver [bma222] using legacy suspend method
- [ 3.483274@2] i2c-core: driver [bma222] using legacy resume method
- [ 3.489457@2] i2c-core: driver [dmard06] using legacy suspend method
- [ 3.495745@2] i2c-core: driver [dmard06] using legacy resume method
- [ 3.502010@2] lsm303d driver: init
- [ 3.505386@2] i2c-core: driver [dmard10] using legacy suspend method
- [ 3.511686@2] i2c-core: driver [dmard10] using legacy resume method
- [ 3.517922@2] stk8313_init
- [ 3.520621@2] ======stk831x init ok======
- [ 3.524561@2] stk831x_init
- [ 3.527269@2] mxc622x accelerometer driver: init
- [ 3.531876@2] i2c-core: driver [mxc622x] using legacy suspend method
- [ 3.538156@2] i2c-core: driver [mxc622x] using legacy resume method
- [ 3.544406@2] mxc6255xc accelerometer driver: init
- [ 3.549178@2] i2c-core: driver [mxc6255xc] using legacy suspend method
- [ 3.555664@2] i2c-core: driver [mxc6255xc] using legacy resume method
- [ 3.562140@2] cm3217 v.1.0.0.1
- [ 3.565116@2] i2c-core: driver [elan_epl6814] using legacy suspend method
- [ 3.571857@2] i2c-core: driver [elan_epl6814] using legacy resume method
- [ 3.578533@2] i2c-core: driver [LTR501] using legacy suspend method
- [ 3.584758@2] i2c-core: driver [LTR501] using legacy resume method
- [ 3.591021@2] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
- [ 3.599039@2] host->base fe108e00
- [ 3.601473@2] pdata->caps 78107
- [ 3.602239@3] hub 1-1:1.0: USB hub found
- [ 3.602571@3] hub 1-1:1.0: 4 ports detected
- [ 3.612555@2] pdata->caps2 0
- [ 3.615395@2] get property: port, value:0x00000004
- [ 3.621901@2] get property: ocr_avail, value:0x00200080
- [ 3.628382@2] get property: f_min, value:0x000493e0
- [ 3.634891@2] get property: f_max, value:0x05f5e100
- [ 3.641386@2] get property: max_req_size, value:0x00020000
- [ 3.647864@2] get property: irq_in, value:0x00000003
- [ 3.654374@2] get property: irq_out, value:0x00000005
- [ 3.660872@2] get property: gpio_cd, str:CARD_6
- [ 3.666829@2] get property: pinname, str:sd
- [ 3.672469@2] get property: card_type, value:0x00000005
- [ 3.678951@2] get property: gpio_dat3, str:CARD_4
- [ 3.684939@2] get property: gpio_volsw, str:GPIOAO_3
- [ 3.691224@2] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
- [ 3.750054@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 3.779399@1] sd: new high speed SDHC card at address aaaa, clock 50000000, 4-bit-bus-width
- [ 3.782484@1] mmcblk0: sd:aaaa SU32G 29.7 GiB
- [ 3.787416@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x28
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 3.815545@1] ***********SDHC_REGS***********
- [ 3.819855@1] SDHC_ARGU: 0x00000900
- [ 3.823331@1] SDHC_SEND: 0x000700d2
- [ 3.826782@1] SDHC_CTRL: 0xe7ffe001
- [ 3.830032@2] [aml_sdhc_probe] aml_sdhc_probe() success!
- [ 3.835565@1] SDHC_STAT: 0x00000020
- [ 3.838998@1] SDHC_CLKC: 0x0002f010
- [ 3.842468@1] SDHC_ADDR: 0x3fc80200
- [ 3.845917@1] SDHC_PDMA: 0x2c43bcf0
- [ 3.849381@1] SDHC_MISC: 0xe0000150
- [ 3.852856@1] SDHC_DATA: 0xaedf0064
- [ 3.856308@1] SDHC_ICTL: 0x000030e6
- [ 3.859771@1] SDHC_ISTA: 0x00004549
- [ 3.863247@1] SDHC_SRST: 0x00000000
- [ 3.866699@1] SDHC_ESTA: 0x00000000
- [ 3.870173@1] SDHC_ENHC: 0x00fe0cff
- [ 3.873626@1] SDHC_CLK2: 0x0000100f
- [ 3.877242@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 3.877848@2] host->base fe108c20
- [ 3.877894@2] pdata->caps 80000507
- [ 3.877901@2] pdata->caps2 1
- [ 3.877906@2] get property: port, value:0x00000002
- [ 3.877909@2] get property: ocr_avail, value:0x00200000
- [ 3.877912@2] get property: f_min, value:0x000493e0
- [ 3.877915@2] get property: f_max, value:0x02faf080
- [ 3.877918@2] get property: f_max_w, value:0x02faf080
- [ 3.877921@2] get property: max_req_size, value:0x00020000
- [ 3.877930@2] get property: pinname, str:emmc
- [ 3.877934@2] get property: card_type, value:0x00000001
- [ 3.877941@2] get property: gpio_dat3, str:BOOT_3
- [ 3.877946@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
- [ 3.958412@2] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x28
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 3.986905@1] ***********SDHC_REGS***********
- [ 3.990029@2] [aml_sdio_probe] aml_sdio_probe() success!
- [ 3.990115@2] [dsp]DSP start addr 0xc5e00000
- [ 3.990146@2] [dsp]register dsp to char divece(257)
- [ 4.005606@1] SDHC_ARGU: 0x00000900
- [ 4.006508@2] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
- [ 4.007883@2] amlogic rfkill init
- [ 4.007961@2] Bluetooth: btwake_control_init Driver Ver 1.1
- [ 4.008297@2] aml_hw_crypto initialization.
- [ 4.020716@2] pcm5102_platform_probe
- [ 4.021013@2] i2s get no clk src setting in dts, use the default mpll 0
- [ 4.021310@2] enter spdif_dit_probe
- [ 4.021313@2] aml_spdif_unmute
- [ 4.044928@1] SDHC_SEND: 0x000700d2
- [ 4.048367@1] SDHC_CTRL: 0xe7ffe001
- [ 4.051843@1] SDHC_STAT: 0x00000020
- [ 4.055288@1] SDHC_CLKC: 0x0002f010
- [ 4.058751@1] SDHC_ADDR: 0x3fc80200
- [ 4.062229@1] SDHC_PDMA: 0x2c43bcf0
- [ 4.065678@1] SDHC_MISC: 0xe0000150
- [ 4.069142@1] SDHC_DATA: 0xaedf0020
- [ 4.072619@1] SDHC_ICTL: 0x000030e6
- [ 4.076069@1] SDHC_ISTA: 0x00004549
- [ 4.079532@1] SDHC_SRST: 0x00000000
- [ 4.083011@1] SDHC_ESTA: 0x00000000
- [ 4.086459@1] SDHC_ENHC: 0x00fe0cff
- [ 4.089923@1] SDHC_CLK2: 0x0000100f
- [ 4.093573@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 4.093883@2] aml-i2s 0:playback preallocate_dma_buffer: area=f04e8000, addr=3fc40000, size=65536
- [ 4.110250@2] aml-i2s 1:capture preallocate_dma_buffer: area=f04fa000, addr=3fc60000, size=65536
- [ 4.110476@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x2a
- [ 4.110476@1] [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 4.110489@1] ***********SDHC_REGS***********
- [ 4.110491@1] SDHC_ARGU: 0x00000900
- [ 4.110493@1] SDHC_SEND: 0x000700d2
- [ 4.110495@1] SDHC_CTRL: 0xe7ffe001
- [ 4.110497@1] SDHC_STAT: 0x00000020
- [ 4.110498@1] SDHC_CLKC: 0x0002f010
- [ 4.110500@1] SDHC_ADDR: 0x3fc80200
- [ 4.110502@1] SDHC_PDMA: 0x2c43bcf0
- [ 4.110504@1] SDHC_MISC: 0xe0000150
- [ 4.110505@1] SDHC_DATA: 0xaedf0020
- [ 4.110507@1] SDHC_ICTL: 0x000030e6
- [ 4.110509@1] SDHC_ISTA: 0x00000549
- [ 4.110510@1] SDHC_SRST: 0x00000000
- [ 4.110512@1] SDHC_ESTA: 0x00000000
- [ 4.110514@1] SDHC_ENHC: 0x00fe0cff
- [ 4.110515@1] SDHC_CLK2: 0x0000100f
- [ 4.110642@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 4.111020@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x32
- [ 4.111020@1] [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 4.111033@1] ***********SDHC_REGS***********
- [ 4.111035@1] SDHC_ARGU: 0x00000900
- [ 4.111037@1] SDHC_SEND: 0x000700d2
- [ 4.111039@1] SDHC_CTRL: 0xe7ffe001
- [ 4.111040@1] SDHC_STAT: 0x00000020
- [ 4.111042@1] SDHC_CLKC: 0x0002f010
- [ 4.111044@1] SDHC_ADDR: 0x3fc80200
- [ 4.111045@1] SDHC_PDMA: 0x2c43bcf0
- [ 4.111047@1] SDHC_MISC: 0xe0000150
- [ 4.111049@1] SDHC_DATA: 0xea9f0060
- [ 4.111051@1] SDHC_ICTL: 0x000030e6
- [ 4.111052@1] SDHC_ISTA: 0x00004549
- [ 4.111054@1] SDHC_SRST: 0x00000000
- [ 4.111056@1] SDHC_ESTA: 0x00000000
- [ 4.111057@1] SDHC_ENHC: 0x00fe0cff
- [ 4.111059@1] SDHC_CLK2: 0x0000100f
- [ 4.111182@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 4.111793@1] mmcblk0: p1 p2 p3
- [ 4.310832@2] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
- [ 4.319074@1] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 4.319640@2] GACT probability NOT on
- [ 4.319648@2] Mirror/redirect action on
- [ 4.320276@2] NET: Registered protocol family 10
- [ 4.320983@2] mip6: Mobile IPv6
- [ 4.320987@2] sit: IPv6 over IPv4 tunneling driver
- [ 4.321862@2] NET: Registered protocol family 17
- [ 4.321889@2] NET: Registered protocol family 15
- [ 4.321957@2] Bridge firewalling registered
- [ 4.322102@2] Bluetooth: RFCOMM TTY layer initialized
- [ 4.322130@2] Bluetooth: RFCOMM socket layer initialized
- [ 4.322134@2] Bluetooth: RFCOMM ver 1.11
- [ 4.322138@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.322140@2] Bluetooth: BNEP filters: protocol multicast
- [ 4.322149@2] Bluetooth: BNEP socket layer initialized
- [ 4.322151@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.322158@2] Bluetooth: HIDP socket layer initialized
- [ 4.322180@2] NET: Registered protocol family 35
- [ 4.404502@2] VFP support v0.3: [ 4.404538@1] aml_emmc_hw_reset 1379
- implementor 41 architecture 2 part 30 variant 5 rev 1
- [ 4.415860@2] Registering SWP/SWPB emulation handler
- [ 4.420928@2] pm-meson: probe of aml_pm_m8 failed with error -1
- [ 4.427070@2] registered taskstats version 1
- [ 4.430992@2] regulator-dummy: disabling
- [ 4.435015@2] Mali DRM initialize, driver name: mali_drm, version 2.1
- [ 4.441507@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
- [ 4.447376@2] Mali DRM initialize, driver name: mali_drm, version 2.1
- [ 4.453983@2] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
- [ 4.460528@2] aml_rtc rtc.1: setting system clock to 1970-01-01 00:00:00 UTC (0)
- [ 4.467291@2] ### dt-test ### No testcase data in device tree; not running tests
- [ 4.474770@2] meson_cpufreq_probe:SYSPLL request to be fixed
- [ 4.480282@2] meson_cpufreq: no voltage_control prop
- [ 4.485198@2] voltage_control = 0
- [ 4.489341@2] <<-GTP-INFO->> GTP driver installing...
- [ 4.493747@2] buf[0]=f6,buf[1]=af,err=4
- [ 4.497328@2] adc=383,TS_C=22,flag=1
- [ 4.500890@2] efuse_flag=a
- [ 4.503557@2] amlogic_thermal_probe, this chip is trimmed, use thermal
- [ 4.510067@2] amlogic-thermal aml_thermal: amlogic thermal probe start
- [ 4.516546@2] #thermal-cells=7
- [ 4.519574@2] pdata->temp_trip_count=4
- [ 4.523316@2] temperature=70 on trip point=0
- [ 4.527540@2] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
- [ 4.534293@2] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
- [ 4.540989@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- [ 4.547368@2] cpu[0] core num==3
- [ 4.550583@2] gpu[0] core num==2
- [ 4.553776@2] temperature=80 on trip point=1
- [ 4.558018@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
- [ 4.564773@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
- [ 4.571451@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
- [ 4.577847@2] cpu[1] core num==2
- [ 4.581061@2] gpu[1] core num==2
- [ 4.584255@2] temperature=90 on trip point=2
- [ 4.588497@2] fixing high_freq=800001 to 696000 at trip point 2,level=11
- [ 4.595165@2] fixing low_freq=800001 to 696000 at trip point 2,level=11
- [ 4.601757@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- [ 4.608153@2] cpu[2] core num==1
- [ 4.611367@2] gpu[2] core num==1
- [ 4.614561@2] temperature=110 on trip point=3
- [ 4.618890@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
- [ 4.624951@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
- [ 4.630937@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
- [ 4.637160@2] cpu[3] core num==-1
- [ 4.640460@2] gpu[3] core num==-1
- [ 4.643742@2] idle interval=1000
- [ 4.646946@2] pdata->name:aml_thermal
- [ 4.650797@2] tmp_trip[0].cpu_core_upper=1
- [ 4.654661@2] tmp_trip[1].cpu_core_upper=2
- [ 4.658728@2] tmp_trip[2].cpu_core_upper=3
- [ 4.662816@2] tmp_trip[3].cpu_core_upper=-1
- [ 4.666956@2] aml_thermal bind thermal-cpucore-0 okay !
- [ 4.672188@2] aml_thermal bind thermal-cpufreq-0 okay !
- [ 4.677340@2] pdata->tmp_trip[0].gpu_lower_level=1
- [ 4.682112@2] pdata->tmp_trip[0].gpu_upper_level=1
- [ 4.686872@2] pdata->tmp_trip[1].gpu_lower_level=2
- [ 4.691636@2] pdata->tmp_trip[1].gpu_upper_level=2
- [ 4.696396@2] pdata->tmp_trip[2].gpu_lower_level=4
- [ 4.701160@2] pdata->tmp_trip[2].gpu_upper_level=4
- [ 4.705921@2] pdata->tmp_trip[3].gpu_lower_level=-1
- [ 4.710771@2] pdata->tmp_trip[3].gpu_upper_level=-1
- [ 4.715619@2] aml_thermal bind thermal-gpufreq-0 okay !
- [ 4.720942@2] amlogic: Kernel Thermal management registered
- [ 4.726350@2] amlogic-thermal aml_thermal: amlogic thermal probe done
- [ 4.732828@2] hdmitx: cec: CEC init
- [ 4.736308@1] hdmitx: cec: CEC task process
- [ 4.736445@2] input: cec_input as /devices/virtual/input/input0
- [ 4.736608@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
- [ 4.736[ 4.770027@2] Changing uart_ao_ttyS0: baud from 0 to 115200
- [ 4.790223@2] Freeing unused kernel memory: 224K (c0938000 - c0970000)
- Loading, please wait...
- [ 4.835089@0] udevd[108]: starting version 175
- [ 4.924454@0] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 4.947978@1] ***********SDHC_REGS***********
- [ 4.952435@1] SDHC_ARGU: 0x00000900
- [ 4.955740@1] SDHC_SEND: 0x000700d2
- [ 4.959217@1] SDHC_CTRL: 0xe7ffe001
- [ 4.962766@1] SDHC_STAT: 0x0000003e
- [ 4.966178@1] SDHC_CLKC: 0x0002f010
- [ 4.969636@1] SDHC_ADDR: 0x3fc80200
- [ 4.973138@1] SDHC_PDMA: 0x2c43bcf0
- [ 4.976588@1] SDHC_MISC: 0xe0000150
- [ 4.980078@1] SDHC_DATA: 0xc0f50ea7
- [ 4.983535@1] SDHC_ICTL: 0x000030e6
- [ 4.987005@1] SDHC_ISTA: 0x00000549
- [ 4.990583@1] SDHC_SRST: 0x00000000
- [ 4.993950@1] SDHC_ESTA: 0x00000000
- [ 4.997423@1] SDHC_ENHC: 0x00fe0cff
- [ 5.000926@1] SDHC_CLK2: 0x0000100f
- [ 5.004501@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.013197@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x32
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.041660@1] ***********SDHC_REGS***********
- [ 5.045966@1] SDHC_ARGU: 0x00000900
- [ 5.049434@1] SDHC_SEND: 0x000700d2
- [ 5.052939@1] SDHC_CTRL: 0xe7ffe001
- [ 5.056383@1] SDHC_STAT: 0x0000003e
- [ 5.059855@1] SDHC_CLKC: 0x0002f010
- [ 5.063348@1] SDHC_ADDR: 0x3fc80200
- [ 5.066803@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.070291@1] SDHC_MISC: 0xe0000150
- [ 5.073750@1] SDHC_DATA: 0xc0f50ea7
- [ 5.077223@1] SDHC_ICTL: 0x000030e6
- [ 5.080726@1] SDHC_ISTA: 0x00000549
- [ 5.084171@1] SDHC_SRST: 0x00000000
- [ 5.087643@1] SDHC_ESTA: 0x00000000
- [ 5.091152@1] SDHC_ENHC: 0x00fe0cff
- [ 5.094591@1] SDHC_CLK2: 0x0000100f
- [ 5.098221@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.106882@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x3a
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.135272@1] ***********SDHC_REGS***********
- [ 5.139575@1] SDHC_ARGU: 0x00000900
- [ 5.143070@1] SDHC_SEND: 0x000700d2
- [ 5.146521@1] SDHC_CTRL: 0xe7ffe001
- [ 5.149994@1] SDHC_STAT: 0x0000003e
- [ 5.153500@1] SDHC_CLKC: 0x0002f010
- [ 5.156942@1] SDHC_ADDR: 0x3fc80200
- [ 5.160432@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.163889@1] SDHC_MISC: 0xe0000150
- [ 5.167362@1] SDHC_DATA: 0xc0f50ea7
- [ 5.170866@1] SDHC_ICTL: 0x000030e6
- [ 5.174310@1] SDHC_ISTA: 0x00000549
- [ 5.177782@1] SDHC_SRST: 0x00000000
- [ 5.181277@1] SDHC_ESTA: 0x00000000
- [ 5.184730@1] SDHC_ENHC: 0x00fe0cff
- [ 5.188203@1] SDHC_CLK2: 0x0000100f
- [ 5.191862@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.200459@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x34
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.228886@1] ***********SDHC_REGS***********
- [ 5.233206@1] SDHC_ARGU: 0x00000900
- [ 5.236660@1] SDHC_SEND: 0x000700d2
- [ 5.240146@1] SDHC_CTRL: 0xe7ffe001
- [ 5.243607@1] SDHC_STAT: 0x0000003e
- [ 5.247080@1] SDHC_CLKC: 0x0002f010
- [ 5.250566@1] SDHC_ADDR: 0x3fc80200
- [ 5.254028@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.257500@1] SDHC_MISC: 0xe0000150
- [ 5.260986@1] SDHC_DATA: 0xc0f50ea7
- [ 5.264448@1] SDHC_ICTL: 0x000030e6
- [ 5.267921@1] SDHC_ISTA: 0x00000549
- [ 5.271405@1] SDHC_SRST: 0x00000000
- [ 5.274868@1] SDHC_ESTA: 0x00000000
- [ 5.278342@1] SDHC_ENHC: 0x00fe0cff
- [ 5.281834@1] SDHC_CLK2: 0x0000100f
- [ 5.285418@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.294066@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x3e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.322473@1] ***********SDHC_REGS***********
- [ 5.326799@1] SDHC_ARGU: 0x00000900
- [ 5.330283@1] SDHC_SEND: 0x000700d2
- [ 5.333746@1] SDHC_CTRL: 0xe7ffe001
- [ 5.337219@1] SDHC_STAT: 0x0000003e
- [ 5.340702@1] SDHC_CLKC: 0x0002f010
- [ 5.344166@1] SDHC_ADDR: 0x3fc80200
- [ 5.347640@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.351124@1] SDHC_MISC: 0xe0000150
- [ 5.354587@1] SDHC_DATA: 0xc0f50ea7
- [ 5.358060@1] SDHC_ICTL: 0x000030e6
- [ 5.361543@1] SDHC_ISTA: 0x00000549
- [ 5.365008@1] SDHC_SRST: 0x00000000
- [ 5.368481@1] SDHC_ESTA: 0x00000000
- [ 5.371963@1] SDHC_ENHC: 0x00fe0cff
- [ 5.375428@1] SDHC_CLK2: 0x0000100f
- [ 5.379011@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.387672@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.416178@1] ***********SDHC_REGS***********
- [ 5.420507@1] SDHC_ARGU: 0x00000900
- [ 5.423971@1] SDHC_SEND: 0x000700d2
- [ 5.427445@1] SDHC_CTRL: 0xe7ffe001
- [ 5.430927@1] SDHC_STAT: 0x0000003e
- [ 5.434392@1] SDHC_CLKC: 0x0002f010
- [ 5.437866@1] SDHC_ADDR: 0x3fc80200
- [ 5.441348@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.444813@1] SDHC_MISC: 0xe0000150
- [ 5.448286@1] SDHC_DATA: 0xc0f50ea7
- [ 5.451768@1] SDHC_ICTL: 0x000030e6
- [ 5.455234@1] SDHC_ISTA: 0x00000549
- [ 5.458707@1] SDHC_SRST: 0x00000000
- [ 5.462189@1] SDHC_ESTA: 0x00000000
- [ 5.465654@1] SDHC_ENHC: 0x00fe0cff
- [ 5.469128@1] SDHC_CLK2: 0x0000100f
- [ 5.472711@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.480783@1] end_request: I/O error, dev mmcblk0, sector 62333824
- [ 5.486935@1] Buffer I/O error on device mmcblk0, logical block 7791728
- [ 5.494208@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x3e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.522550@1] ***********SDHC_REGS***********
- [ 5.526876@1] SDHC_ARGU: 0x00000900
- [ 5.530358@1] SDHC_SEND: 0x000700d2
- [ 5.533823@1] SDHC_CTRL: 0xe7ffe001
- [ 5.537296@1] SDHC_STAT: 0x0000003e
- [ 5.540781@1] SDHC_CLKC: 0x0002f010
- [ 5.544244@1] SDHC_ADDR: 0x3fc80200
- [ 5.547717@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.551199@1] SDHC_MISC: 0xe0000150
- [ 5.554665@1] SDHC_DATA: 0xc0f50ea7
- [ 5.558138@1] SDHC_ICTL: 0x000030e6
- [ 5.561620@1] SDHC_ISTA: 0x00000549
- [ 5.565085@1] SDHC_SRST: 0x00000000
- [ 5.568558@1] SDHC_ESTA: 0x00000000
- [ 5.572040@1] SDHC_ENHC: 0x00fe0cff
- [ 5.575506@1] SDHC_CLK2: 0x0000100f
- [ 5.579084@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.587747@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x32
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.616249@1] ***********SDHC_REGS***********
- [ 5.620584@1] SDHC_ARGU: 0x00000900
- [ 5.624049@1] SDHC_SEND: 0x000700d2
- [ 5.627523@1] SDHC_CTRL: 0xe7ffe001
- [ 5.631005@1] SDHC_STAT: 0x0000003e
- [ 5.634470@1] SDHC_CLKC: 0x0002f010
- [ 5.637943@1] SDHC_ADDR: 0x3fc80200
- [ 5.641425@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.644890@1] SDHC_MISC: 0xe0000150
- [ 5.648364@1] SDHC_DATA: 0xc0f50ea7
- [ 5.651846@1] SDHC_ICTL: 0x000030e6
- [ 5.655311@1] SDHC_ISTA: 0x00000549
- [ 5.658784@1] SDHC_SRST: 0x00000000
- [ 5.662266@1] SDHC_ESTA: 0x00000000
- [ 5.665732@1] SDHC_ENHC: 0x00fe0cff
- [ 5.669205@1] SDHC_CLK2: 0x0000100f
- [ 5.672791@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.681444@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x2e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.709940@1] ***********SDHC_REGS***********
- [ 5.714284@1] SDHC_ARGU: 0x00000900
- [ 5.717749@1] SDHC_SEND: 0x000700d2
- [ 5.721231@1] SDHC_CTRL: 0xe7ffe001
- [ 5.724696@1] SDHC_STAT: 0x0000003e
- [ 5.728169@1] SDHC_CLKC: 0x0002f010
- [ 5.731651@1] SDHC_ADDR: 0x3fc80200
- [ 5.735116@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.738590@1] SDHC_MISC: 0xe0000150
- [ 5.742072@1] SDHC_DATA: 0xc0f50ea7
- [ 5.745537@1] SDHC_ICTL: 0x000030e6
- [ 5.749010@1] SDHC_ISTA: 0x00000549
- [ 5.752492@1] SDHC_SRST: 0x00000000
- [ 5.755958@1] SDHC_ESTA: 0x00000000
- [ 5.759431@1] SDHC_ENHC: 0x00fe0cff
- [ 5.762913@1] SDHC_CLK2: 0x0000100f
- [ 5.766478@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.775144@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x38
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.803561@1] ***********SDHC_REGS***********
- [ 5.807888@1] SDHC_ARGU: 0x00000900
- [ 5.811370@1] SDHC_SEND: 0x000700d2
- [ 5.814835@1] SDHC_CTRL: 0xe7ffe001
- [ 5.818308@1] SDHC_STAT: 0x0000003e
- [ 5.821790@1] SDHC_CLKC: 0x0002f010
- [ 5.825255@1] SDHC_ADDR: 0x3fc80200
- [ 5.828729@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.832210@1] SDHC_MISC: 0xe0000150
- [ 5.835676@1] SDHC_DATA: 0xc0f50ea7
- [ 5.839149@1] SDHC_ICTL: 0x000030e6
- [ 5.842631@1] SDHC_ISTA: 0x00000549
- [ 5.846097@1] SDHC_SRST: 0x00000000
- [ 5.849570@1] SDHC_ESTA: 0x00000000
- [ 5.853052@1] SDHC_ENHC: 0x00fe0cff
- [ 5.856518@1] SDHC_CLK2: 0x0000100f
- [ 5.860101@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.868742@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x2a
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.897173@1] ***********SDHC_REGS***********
- [ 5.901509@1] SDHC_ARGU: 0x00000900
- [ 5.904974@1] SDHC_SEND: 0x000700d2
- [ 5.908447@1] SDHC_CTRL: 0xe7ffe001
- [ 5.911929@1] SDHC_STAT: 0x0000003e
- [ 5.915395@1] SDHC_CLKC: 0x0002f010
- [ 5.918868@1] SDHC_ADDR: 0x3fc80200
- [ 5.922350@1] SDHC_PDMA: 0x2c43bcf0
- [ 5.925815@1] SDHC_MISC: 0xe0000150
- [ 5.929289@1] SDHC_DATA: 0xc0f50ea7
- [ 5.932777@1] SDHC_ICTL: 0x000030e6
- [ 5.936236@1] SDHC_ISTA: 0x00000549
- [ 5.939709@1] SDHC_SRST: 0x00000000
- [ 5.943192@1] SDHC_ESTA: 0x00000000
- [ 5.946657@1] SDHC_ENHC: 0x00fe0cff
- [ 5.950138@1] SDHC_CLK2: 0x0000100f
- [ 5.953701@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 5.962367@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b72380, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x34
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 5.990875@1] ***********SDHC_REGS***********
- [ 5.995200@1] SDHC_ARGU: 0x00000900
- [ 5.998673@1] SDHC_SEND: 0x000700d2
- [ 6.002156@1] SDHC_CTRL: 0xe7ffe001
- [ 6.005621@1] SDHC_STAT: 0x0000003e
- [ 6.009094@1] SDHC_CLKC: 0x0002f010
- [ 6.012577@1] SDHC_ADDR: 0x3fc80200
- [ 6.016041@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.019515@1] SDHC_MISC: 0xe0000150
- [ 6.022997@1] SDHC_DATA: 0xc0f50ea7
- [ 6.026462@1] SDHC_ICTL: 0x000030e6
- [ 6.029935@1] SDHC_ISTA: 0x00000549
- [ 6.033417@1] SDHC_SRST: 0x00000000
- [ 6.036883@1] SDHC_ESTA: 0x00000000
- [ 6.040364@1] SDHC_ENHC: 0x00fe0cff
- [ 6.043830@1] SDHC_CLK2: 0x0000100f
- [ 6.047409@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.055484@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
- [ 6.062080@1] end_request: I/O error, dev mmcblk0, sector 62333824
- [ 6.068236@1] Buffer I/O error on device mmcblk0, logical block 7791728
- [ 6.075597@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.103940@1] ***********SDHC_REGS***********
- [ 6.108264@1] SDHC_ARGU: 0x00000900
- [ 6.111747@1] SDHC_SEND: 0x000700d2
- [ 6.115212@1] SDHC_CTRL: 0xe7ffe001
- [ 6.118685@1] SDHC_STAT: 0x0000003e
- [ 6.122168@1] SDHC_CLKC: 0x0002f010
- [ 6.125632@1] SDHC_ADDR: 0x3fc80200
- [ 6.129106@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.132588@1] SDHC_MISC: 0xe0000150
- [ 6.136053@1] SDHC_DATA: 0x60ed8fde
- [ 6.139526@1] SDHC_ICTL: 0x000030e6
- [ 6.143009@1] SDHC_ISTA: 0x00000549
- [ 6.146474@1] SDHC_SRST: 0x00000000
- [ 6.149947@1] SDHC_ESTA: 0x00000000
- [ 6.153429@1] SDHC_ENHC: 0x00fe0cff
- [ 6.156895@1] SDHC_CLK2: 0x0000100f
- [ 6.160488@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.169126@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.197644@1] ***********SDHC_REGS***********
- [ 6.201975@1] SDHC_ARGU: 0x00000900
- [ 6.205438@1] SDHC_SEND: 0x000700d2
- [ 6.208911@1] SDHC_CTRL: 0xe7ffe001
- [ 6.212393@1] SDHC_STAT: 0x0000003e
- [ 6.215858@1] SDHC_CLKC: 0x0002f010
- [ 6.219332@1] SDHC_ADDR: 0x3fc80200
- [ 6.222814@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.226279@1] SDHC_MISC: 0xe0000150
- [ 6.229752@1] SDHC_DATA: 0x60ed8fde
- [ 6.233234@1] SDHC_ICTL: 0x000030e6
- [ 6.236700@1] SDHC_ISTA: 0x00000549
- [ 6.240181@1] SDHC_SRST: 0x00000000
- [ 6.243647@1] SDHC_ESTA: 0x00000000
- [ 6.247120@1] SDHC_ENHC: 0x00fe0cff
- [ 6.250602@1] SDHC_CLK2: 0x0000100f
- [ 6.254166@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.262839@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x24
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.291250@1] ***********SDHC_REGS***********
- [ 6.295577@1] SDHC_ARGU: 0x00000900
- [ 6.299050@1] SDHC_SEND: 0x000700d2
- [ 6.302533@1] SDHC_CTRL: 0xe7ffe001
- [ 6.305997@1] SDHC_STAT: 0x0000003e
- [ 6.309471@1] SDHC_CLKC: 0x0002f010
- [ 6.312953@1] SDHC_ADDR: 0x3fc80200
- [ 6.316418@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.319891@1] SDHC_MISC: 0xe0000150
- [ 6.323373@1] SDHC_DATA: 0x60ed8fde
- [ 6.326839@1] SDHC_ICTL: 0x000030e6
- [ 6.330320@1] SDHC_ISTA: 0x00000549
- [ 6.333786@1] SDHC_SRST: 0x00000000
- [ 6.337259@1] SDHC_ESTA: 0x00000000
- [ 6.340741@1] SDHC_ENHC: 0x00fe0cff
- [ 6.344206@1] SDHC_CLK2: 0x0000100f
- [ 6.347777@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.356451@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x2c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.384950@1] ***********SDHC_REGS***********
- [ 6.389276@1] SDHC_ARGU: 0x00000900
- [ 6.392758@1] SDHC_SEND: 0x000700d2
- [ 6.396223@1] SDHC_CTRL: 0xe7ffe001
- [ 6.399697@1] SDHC_STAT: 0x0000003e
- [ 6.403179@1] SDHC_CLKC: 0x0002f010
- [ 6.406644@1] SDHC_ADDR: 0x3fc80200
- [ 6.410126@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.413591@1] SDHC_MISC: 0xe0000150
- [ 6.417065@1] SDHC_DATA: 0x60ed8fde
- [ 6.420547@1] SDHC_ICTL: 0x000030e6
- [ 6.424012@1] SDHC_ISTA: 0x00000549
- [ 6.427485@1] SDHC_SRST: 0x00000000
- [ 6.430967@1] SDHC_ESTA: 0x00000000
- [ 6.434432@1] SDHC_ENHC: 0x00fe0cff
- [ 6.437906@1] SDHC_CLK2: 0x0000100f
- [ 6.441486@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.450138@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x2e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.478563@1] ***********SDHC_REGS***********
- [ 6.482897@1] SDHC_ARGU: 0x00000900
- [ 6.486362@1] SDHC_SEND: 0x000700d2
- [ 6.489836@1] SDHC_CTRL: 0xe7ffe001
- [ 6.493318@1] SDHC_STAT: 0x0000003e
- [ 6.496783@1] SDHC_CLKC: 0x0002f010
- [ 6.500265@1] SDHC_ADDR: 0x3fc80200
- [ 6.503730@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.507204@1] SDHC_MISC: 0xe0000150
- [ 6.510685@1] SDHC_DATA: 0x60ed8fde
- [ 6.514151@1] SDHC_ICTL: 0x000030e6
- [ 6.517624@1] SDHC_ISTA: 0x00000549
- [ 6.521106@1] SDHC_SRST: 0x00000000
- [ 6.524572@1] SDHC_ESTA: 0x00000000
- [ 6.528045@1] SDHC_ENHC: 0x00fe0cff
- [ 6.531527@1] SDHC_CLK2: 0x0000100f
- [ 6.535089@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.543774@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x28
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.572175@1] ***********SDHC_REGS***********
- [ 6.576502@1] SDHC_ARGU: 0x00000900
- [ 6.579975@1] SDHC_SEND: 0x000700d2
- [ 6.583457@1] SDHC_CTRL: 0xe7ffe001
- [ 6.586922@1] SDHC_STAT: 0x0000003e
- [ 6.590404@1] SDHC_CLKC: 0x0002f010
- [ 6.593869@1] SDHC_ADDR: 0x3fc80200
- [ 6.597343@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.600824@1] SDHC_MISC: 0xe0000150
- [ 6.604290@1] SDHC_DATA: 0x60ed8fde
- [ 6.607763@1] SDHC_ICTL: 0x000030e6
- [ 6.611245@1] SDHC_ISTA: 0x00000549
- [ 6.614711@1] SDHC_SRST: 0x00000000
- [ 6.618184@1] SDHC_ESTA: 0x00000000
- [ 6.621666@1] SDHC_ENHC: 0x00fe0cff
- [ 6.625131@1] SDHC_CLK2: 0x0000100f
- [ 6.628702@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.636783@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
- [ 6.643382@1] end_request: I/O error, dev mmcblk0, sector 62333936
- [ 6.649537@1] Buffer I/O error on device mmcblk0, logical block 7791742
- [ 6.656781@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.685240@1] ***********SDHC_REGS***********
- [ 6.689566@1] SDHC_ARGU: 0x00000900
- [ 6.693048@1] SDHC_SEND: 0x000700d2
- [ 6.696513@1] SDHC_CTRL: 0xe7ffe001
- [ 6.699987@1] SDHC_STAT: 0x0000003e
- [ 6.703468@1] SDHC_CLKC: 0x0002f010
- [ 6.706934@1] SDHC_ADDR: 0x3fc80200
- [ 6.710416@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.713881@1] SDHC_MISC: 0xe0000150
- [ 6.717355@1] SDHC_DATA: 0x60ed8fde
- [ 6.720843@1] SDHC_ICTL: 0x000030e6
- [ 6.724302@1] SDHC_ISTA: 0x00000549
- [ 6.727775@1] SDHC_SRST: 0x00000000
- [ 6.731258@1] SDHC_ESTA: 0x00000000
- [ 6.734722@1] SDHC_ENHC: 0x00fe0cff
- [ 6.738196@1] SDHC_CLK2: 0x0000100f
- [ 6.741779@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.750430@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x28
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.778852@1] ***********SDHC_REGS***********
- [ 6.783187@1] SDHC_ARGU: 0x00000900
- [ 6.786652@1] SDHC_SEND: 0x000700d2
- [ 6.790134@1] SDHC_CTRL: 0xe7ffe001
- [ 6.793600@1] SDHC_STAT: 0x0000003e
- [ 6.797073@1] SDHC_CLKC: 0x0002f010
- [ 6.800555@1] SDHC_ADDR: 0x3fc80200
- [ 6.804020@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.807494@1] SDHC_MISC: 0xe0000150
- [ 6.810975@1] SDHC_DATA: 0x60ed8fde
- [ 6.814441@1] SDHC_ICTL: 0x000030e6
- [ 6.817914@1] SDHC_ISTA: 0x00000549
- [ 6.821396@1] SDHC_SRST: 0x00000000
- [ 6.824862@1] SDHC_ESTA: 0x00000000
- [ 6.828335@1] SDHC_ENHC: 0x00fe0cff
- [ 6.831817@1] SDHC_CLK2: 0x0000100f
- [ 6.835381@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.844053@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x2c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.872552@1] ***********SDHC_REGS***********
- [ 6.876878@1] SDHC_ARGU: 0x00000900
- [ 6.880361@1] SDHC_SEND: 0x000700d2
- [ 6.883826@1] SDHC_CTRL: 0xe7ffe001
- [ 6.887299@1] SDHC_STAT: 0x0000003e
- [ 6.890781@1] SDHC_CLKC: 0x0002f010
- [ 6.894246@1] SDHC_ADDR: 0x3fc80200
- [ 6.897720@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.901201@1] SDHC_MISC: 0xe0000150
- [ 6.904667@1] SDHC_DATA: 0x60ed8fde
- [ 6.908140@1] SDHC_ICTL: 0x000030e6
- [ 6.911624@1] SDHC_ISTA: 0x00000549
- [ 6.915088@1] SDHC_SRST: 0x00000000
- [ 6.918561@1] SDHC_ESTA: 0x00000000
- [ 6.922043@1] SDHC_ENHC: 0x00fe0cff
- [ 6.925508@1] SDHC_CLK2: 0x0000100f
- [ 6.929079@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 6.937752@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3e
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 6.966251@1] ***********SDHC_REGS***********
- [ 6.970586@1] SDHC_ARGU: 0x00000900
- [ 6.974052@1] SDHC_SEND: 0x000700d2
- [ 6.977525@1] SDHC_CTRL: 0xe7ffe001
- [ 6.981014@1] SDHC_STAT: 0x0000003e
- [ 6.984472@1] SDHC_CLKC: 0x0002f010
- [ 6.987946@1] SDHC_ADDR: 0x3fc80200
- [ 6.991430@1] SDHC_PDMA: 0x2c43bcf0
- [ 6.994893@1] SDHC_MISC: 0xe0000150
- [ 6.998366@1] SDHC_DATA: 0x60ed8fde
- [ 7.001851@1] SDHC_ICTL: 0x000030e6
- [ 7.005314@1] SDHC_ISTA: 0x00000549
- [ 7.008787@1] SDHC_SRST: 0x00000000
- [ 7.012269@1] SDHC_ESTA: 0x00000000
- [ 7.015734@1] SDHC_ENHC: 0x00fe0cff
- [ 7.019208@1] SDHC_CLK2: 0x0000100f
- [ 7.022792@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 7.031457@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x24
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.059942@1] ***********SDHC_REGS***********
- [ 7.064287@1] SDHC_ARGU: 0x00000900
- [ 7.067751@1] SDHC_SEND: 0x000700d2
- [ 7.071233@1] SDHC_CTRL: 0xe7ffe001
- [ 7.074698@1] SDHC_STAT: 0x0000003e
- [ 7.078172@1] SDHC_CLKC: 0x0002f010
- [ 7.081656@1] SDHC_ADDR: 0x3fc80200
- [ 7.085119@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.088592@1] SDHC_MISC: 0xe0000150
- [ 7.092081@1] SDHC_DATA: 0x60ed8fde
- [ 7.095539@1] SDHC_ICTL: 0x000030e6
- [ 7.099013@1] SDHC_ISTA: 0x00000549
- [ 7.102496@1] SDHC_SRST: 0x00000000
- [ 7.105960@1] SDHC_ESTA: 0x00000000
- [ 7.109434@1] SDHC_ENHC: 0x00fe0cff
- [ 7.112916@1] SDHC_CLK2: 0x0000100f
- [ 7.116493@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 7.125154@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 03b723f0, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x24
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.153563@1] ***********SDHC_REGS***********
- [ 7.157890@1] SDHC_ARGU: 0x00000900
- [ 7.161372@1] SDHC_SEND: 0x000700d2
- [ 7.164837@1] SDHC_CTRL: 0xe7ffe001
- [ 7.168311@1] SDHC_STAT: 0x0000003e
- [ 7.171792@1] SDHC_CLKC: 0x0002f010
- [ 7.175258@1] SDHC_ADDR: 0x3fc80200
- [ 7.178731@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.182213@1] SDHC_MISC: 0xe0000150
- [ 7.185679@1] SDHC_DATA: 0x60ed8fde
- [ 7.189152@1] SDHC_ICTL: 0x000030e6
- [ 7.192634@1] SDHC_ISTA: 0x00000549
- [ 7.196099@1] SDHC_SRST: 0x00000000
- [ 7.199573@1] SDHC_ESTA: 0x00000000
- [ 7.203054@1] SDHC_ENHC: 0x00fe0cff
- [ 7.206520@1] SDHC_CLK2: 0x0000100f
- [ 7.210099@1] mmcblk0: response CRC error sending r/w cmd command, card status 0x80000b00
- [ 7.218159@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
- [ 7.224773@1] end_request: I/O error, dev mmcblk0, sector 62333936
- [ 7.230937@1] Buffer I/O error on device mmcblk0, logical block 7791742
- [ 7.238328@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.266630@1] ***********SDHC_REGS***********
- [ 7.270963@1] SDHC_ARGU: 0x00000900
- [ 7.274428@1] SDHC_SEND: 0x000700d2
- [ 7.277902@1] SDHC_CTRL: 0xe7ffe001
- [ 7.281384@1] SDHC_STAT: 0x00000020
- [ 7.284849@1] SDHC_CLKC: 0x0002f010
- [ 7.288322@1] SDHC_ADDR: 0x3fc80200
- [ 7.291804@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.295270@1] SDHC_MISC: 0xe0000150
- [ 7.298743@1] SDHC_DATA: 0xaedf0020
- [ 7.302225@1] SDHC_ICTL: 0x000030e6
- [ 7.305691@1] SDHC_ISTA: 0x00004549
- [ 7.309164@1] SDHC_SRST: 0x00000000
- [ 7.312646@1] SDHC_ESTA: 0x00000000
- [ 7.316111@1] SDHC_ENHC: 0x00fe0cff
- [ 7.319584@1] SDHC_CLK2: 0x0000100f
- [ 7.323169@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.331282@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.359885@1] ***********SDHC_REGS***********
- [ 7.364229@1] SDHC_ARGU: 0x00000900
- [ 7.367694@1] SDHC_SEND: 0x000700d2
- [ 7.371176@1] SDHC_CTRL: 0xe7ffe001
- [ 7.374641@1] SDHC_STAT: 0x00000020
- [ 7.378114@1] SDHC_CLKC: 0x0002f010
- [ 7.381596@1] SDHC_ADDR: 0x3fc80200
- [ 7.385061@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.388535@1] SDHC_MISC: 0xe0000150
- [ 7.392017@1] SDHC_DATA: 0xaedf0064
- [ 7.395482@1] SDHC_ICTL: 0x000030e6
- [ 7.398956@1] SDHC_ISTA: 0x00004549
- [ 7.402438@1] SDHC_SRST: 0x00000000
- [ 7.405903@1] SDHC_ESTA: 0x00000000
- [ 7.409376@1] SDHC_ENHC: 0x00fe0cff
- [ 7.412858@1] SDHC_CLK2: 0x0000100f
- [ 7.416423@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.424546@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x30
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.453159@1] ***********SDHC_REGS***********
- [ 7.457485@1] SDHC_ARGU: 0x00000900
- [ 7.460967@1] SDHC_SEND: 0x000700d2
- [ 7.464433@1] SDHC_CTRL: 0xe7ffe001
- [ 7.467906@1] SDHC_STAT: 0x00000020
- [ 7.471388@1] SDHC_CLKC: 0x0002f010
- [ 7.474853@1] SDHC_ADDR: 0x3fc80200
- [ 7.478327@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.481808@1] SDHC_MISC: 0xe0000150
- [ 7.485274@1] SDHC_DATA: 0xaedf0020
- [ 7.488747@1] SDHC_ICTL: 0x000030e6
- [ 7.492229@1] SDHC_ISTA: 0x00004549
- [ 7.495694@1] SDHC_SRST: 0x00000000
- [ 7.499168@1] SDHC_ESTA: 0x00000000
- [ 7.502650@1] SDHC_ENHC: 0x00fe0cff
- [ 7.506115@1] SDHC_CLK2: 0x0000100f
- [ 7.509686@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.517817@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.546424@1] ***********SDHC_REGS***********
- [ 7.550759@1] SDHC_ARGU: 0x00000900
- [ 7.554224@1] SDHC_SEND: 0x000700d2
- [ 7.557698@1] SDHC_CTRL: 0xe7ffe001
- [ 7.561180@1] SDHC_STAT: 0x00000020
- [ 7.564645@1] SDHC_CLKC: 0x0002f010
- [ 7.568118@1] SDHC_ADDR: 0x3fc80200
- [ 7.571600@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.575066@1] SDHC_MISC: 0xe0000150
- [ 7.578539@1] SDHC_DATA: 0xae9f0060
- [ 7.582021@1] SDHC_ICTL: 0x000030e6
- [ 7.585486@1] SDHC_ISTA: 0x00004549
- [ 7.588960@1] SDHC_SRST: 0x00000000
- [ 7.592441@1] SDHC_ESTA: 0x00000000
- [ 7.595907@1] SDHC_ENHC: 0x00fe0cff
- [ 7.599380@1] SDHC_CLK2: 0x0000100f
- [ 7.602960@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.611079@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.639680@1] ***********SDHC_REGS***********
- [ 7.644025@1] SDHC_ARGU: 0x00000900
- [ 7.647490@1] SDHC_SEND: 0x000700d2
- [ 7.650971@1] SDHC_CTRL: 0xe7ffe001
- [ 7.654437@1] SDHC_STAT: 0x00000020
- [ 7.657910@1] SDHC_CLKC: 0x0002f010
- [ 7.661392@1] SDHC_ADDR: 0x3fc80200
- [ 7.664857@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.668331@1] SDHC_MISC: 0xe0000150
- [ 7.671813@1] SDHC_DATA: 0xaedf0064
- [ 7.675278@1] SDHC_ICTL: 0x000030e6
- [ 7.678751@1] SDHC_ISTA: 0x00004549
- [ 7.682233@1] SDHC_SRST: 0x00000000
- [ 7.685699@1] SDHC_ESTA: 0x00000000
- [ 7.689172@1] SDHC_ENHC: 0x00fe0cff
- [ 7.692654@1] SDHC_CLK2: 0x0000100f
- [ 7.696217@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.704341@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.732955@1] ***********SDHC_REGS***********
- [ 7.737281@1] SDHC_ARGU: 0x00000900
- [ 7.740764@1] SDHC_SEND: 0x000700d2
- [ 7.744228@1] SDHC_CTRL: 0xe7ffe001
- [ 7.747702@1] SDHC_STAT: 0x00000020
- [ 7.751184@1] SDHC_CLKC: 0x0002f010
- [ 7.754649@1] SDHC_ADDR: 0x3fc80200
- [ 7.758123@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.761604@1] SDHC_MISC: 0xe0000150
- [ 7.765070@1] SDHC_DATA: 0xaedf0064
- [ 7.768543@1] SDHC_ICTL: 0x000030e6
- [ 7.772031@1] SDHC_ISTA: 0x00004549
- [ 7.775491@1] SDHC_SRST: 0x00000000
- [ 7.778964@1] SDHC_ESTA: 0x00000000
- [ 7.782446@1] SDHC_ENHC: 0x00fe0cff
- [ 7.785911@1] SDHC_CLK2: 0x0000100f
- [ 7.789482@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.797129@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
- [ 7.803726@1] end_request: I/O error, dev mmcblk0, sector 0
- [ 7.809274@1] Buffer I/O error on device mmcblk0, logical block 0
- [ 7.815902@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x22
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.844456@1] ***********SDHC_REGS***********
- [ 7.848783@1] SDHC_ARGU: 0x00000900
- [ 7.852265@1] SDHC_SEND: 0x000700d2
- [ 7.855730@1] SDHC_CTRL: 0xe7ffe001
- [ 7.859203@1] SDHC_STAT: 0x00000020
- [ 7.862685@1] SDHC_CLKC: 0x0002f010
- [ 7.866151@1] SDHC_ADDR: 0x3fc80200
- [ 7.869624@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.873106@1] SDHC_MISC: 0xe0000150
- [ 7.876571@1] SDHC_DATA: 0xaedf0020
- [ 7.880053@1] SDHC_ICTL: 0x000030e6
- [ 7.883519@1] SDHC_ISTA: 0x00004549
- [ 7.886992@1] SDHC_SRST: 0x00000000
- [ 7.890473@1] SDHC_ESTA: 0x00000000
- [ 7.893939@1] SDHC_ENHC: 0x00fe0cff
- [ 7.897413@1] SDHC_CLK2: 0x0000100f
- [ 7.900994@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 7.909096@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x30
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 7.937635@1] ***********SDHC_REGS***********
- [ 7.941970@1] SDHC_ARGU: 0x00000900
- [ 7.945435@1] SDHC_SEND: 0x000700d2
- [ 7.948908@1] SDHC_CTRL: 0xe7ffe001
- [ 7.952390@1] SDHC_STAT: 0x00000020
- [ 7.955856@1] SDHC_CLKC: 0x0002f010
- [ 7.959329@1] SDHC_ADDR: 0x3fc80200
- [ 7.962811@1] SDHC_PDMA: 0x2c43bcf0
- [ 7.966276@1] SDHC_MISC: 0xe0000150
- [ 7.969750@1] SDHC_DATA: 0xae9f0020
- [ 7.973233@1] SDHC_ICTL: 0x000030e6
- [ 7.976697@1] SDHC_ISTA: 0x00004549
- [ 7.980179@1] SDHC_SRST: 0x00000000
- [ 7.983644@1] SDHC_ESTA: 0x00000000
- [ 7.987118@1] SDHC_ENHC: 0x00fe0cff
- [ 7.990601@1] SDHC_CLK2: 0x0000100f
- [ 7.994163@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.002291@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.030820@1] ***********SDHC_REGS***********
- [ 8.035140@1] SDHC_ARGU: 0x00000900
- [ 8.038613@1] SDHC_SEND: 0x000700d2
- [ 8.042097@1] SDHC_CTRL: 0xe7ffe001
- [ 8.045560@1] SDHC_STAT: 0x00000020
- [ 8.049034@1] SDHC_CLKC: 0x0002f010
- [ 8.052516@1] SDHC_ADDR: 0x3fc80200
- [ 8.055981@1] SDHC_PDMA: 0x2c43bcf0
- [ 8.059455@1] SDHC_MISC: 0xe0000150
- [ 8.062937@1] SDHC_DATA: 0xaedf0020
- [ 8.066402@1] SDHC_ICTL: 0x000030e6
- [ 8.069875@1] SDHC_ISTA: 0x00004549
- [ 8.073357@1] SDHC_SRST: 0x00000000
- [ 8.076822@1] SDHC_ESTA: 0x00000000
- [ 8.080307@1] SDHC_ENHC: 0x00fe0cff
- [ 8.083770@1] SDHC_CLK2: 0x0000100f
- [ 8.087345@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.095487@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x34
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.124079@1] ***********SDHC_REGS***********
- [ 8.128405@1] SDHC_ARGU: 0x00000900
- [ 8.131887@1] SDHC_SEND: 0x000700d2
- [ 8.135353@1] SDHC_CTRL: 0xe7ffe001
- [ 8.138826@1] SDHC_STAT: 0x00000020
- [ 8.142308@1] SDHC_CLKC: 0x0002f010
- [ 8.145773@1] SDHC_ADDR: 0x3fc80200
- [ 8.149246@1] SDHC_PDMA: 0x2c43bcf0
- [ 8.152728@1] SDHC_MISC: 0xe0000150
- [ 8.156194@1] SDHC_DATA: 0xaedf0060
- [ 8.159667@1] SDHC_ICTL: 0x000030e6
- [ 8.163149@1] SDHC_ISTA: 0x00004549
- [ 8.166614@1] SDHC_SRST: 0x00000000
- [ 8.170096@1] SDHC_ESTA: 0x00000000
- [ 8.173562@1] SDHC_ENHC: 0x00fe0cff
- [ 8.177035@1] SDHC_CLK2: 0x0000100f
- [ 8.180615@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.188718@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x3c
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.217344@1] ***********SDHC_REGS***********
- [ 8.221679@1] SDHC_ARGU: 0x00000900
- [ 8.225144@1] SDHC_SEND: 0x000700d2
- [ 8.228618@1] SDHC_CTRL: 0xe7ffe001
- [ 8.232099@1] SDHC_STAT: 0x00000020
- [ 8.235565@1] SDHC_CLKC: 0x0002f010
- [ 8.239038@1] SDHC_ADDR: 0x3fc80200
- [ 8.242520@1] SDHC_PDMA: 0x2c43bcf0
- [ 8.245985@1] SDHC_MISC: 0xe0000150
- [ 8.249459@1] SDHC_DATA: 0xaedf0020
- [ 8.252941@1] SDHC_ICTL: 0x000030e6
- [ 8.256406@1] SDHC_ISTA: 0x00004549
- [ 8.259879@1] SDHC_SRST: 0x00000000
- [ 8.263361@1] SDHC_ESTA: 0x00000000
- [ 8.266827@1] SDHC_ENHC: 0x00fe0cff
- [ 8.270308@1] SDHC_CLK2: 0x0000100f
- [ 8.273872@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.281996@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000000, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x20
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.310523@1] ***********SDHC_REGS***********
- [ 8.314849@1] SDHC_ARGU: 0x00000900
- [ 8.318322@1] SDHC_SEND: 0x000700d2
- [ 8.321805@1] SDHC_CTRL: 0xe7ffe001
- [ 8.325269@1] SDHC_STAT: 0x00000020
- [ 8.328743@1] SDHC_CLKC: 0x0002f010
- [ 8.332227@1] SDHC_ADDR: 0x3fc80200
- [ 8.335690@1] SDHC_PDMA: 0x2c43bcf0
- [ 8.339164@1] SDHC_MISC: 0xe0000150
- [ 8.342646@1] SDHC_DATA: 0xaedf0024
- [ 8.346111@1] SDHC_ICTL: 0x000030e6
- [ 8.349584@1] SDHC_ISTA: 0x00004549
- [ 8.353066@1] SDHC_SRST: 0x00000000
- [ 8.356532@1] SDHC_ESTA: 0x00000000
- [ 8.360016@1] SDHC_ENHC: 0x00fe0cff
- [ 8.363479@1] SDHC_CLK2: 0x0000100f
- [ 8.367052@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.374697@1] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
- [ 8.381294@1] end_request: I/O error, dev mmcblk0, sector 0
- [ 8.386842@1] Buffer I/O error on device mmcblk0, logical block 0
- [ 8.393563@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000008, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x20
- [0m[ 8.411049@0] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
- Pinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.428797@1] ***********SDHC_REGS***********
- [ 8.433132@1] SDHC_ARGU: 0x00000900
- [ 8.436597@1] SDHC_SEND: 0x000700d2
- [ 8.440079@1] SDHC_CTRL: 0xe7ffe001
- [ 8.443545@1] SDHC_STAT: 0x00000020
- [ 8.447018@1] SDHC_CLKC: 0x0002f010
- [ 8.450029@0] aml_emmc_hw_reset 1379
- [ 8.454061@1] SDHC_ADDR: 0x3fc80200
- [ 8.457526@1] SDHC_PDMA: 0x2c43bcf0
- [ 8.461008@1] SDHC_MISC: 0xe0000150
- [ 8.464473@1] SDHC_DATA: 0xe4ff1874
- [ 8.467946@1] SDHC_ICTL: 0x000030e6
- [ 8.471428@1] SDHC_ISTA: 0x00004549
- [ 8.474894@1] SDHC_SRST: 0x00000000
- [ 8.478367@1] SDHC_ESTA: 0x00000000
- [ 8.481849@1] SDHC_ENHC: 0x00fe0cff
- [ 8.485314@1] SDHC_CLK2: 0x0000100f
- [ 8.488890@1] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.497075@1] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000008, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x549, STAT=0x22
- [0mPinmux: REG2=0x000000f0, REG3=0x00000000, REG4=0x00000300, REG5=0x00000000, REG6=0xfc003e4f, REG8=0x00000000
- [ 8.525562@0] ***********SDHC_REGS***********
- [ 8.529863@0] SDHC_ARGU: 0x00000900
- [ 8.533352@0] SDHC_SEND: 0x000700d2
- [ 8.536810@0] SDHC_CTRL: 0xe7ffe001
- [ 8.540303@0] SDHC_STAT: 0x00000020
- [ 8.543757@0] SDHC_CLKC: 0x0002f010
- [ 8.547231@0] SDHC_ADDR: 0x3fc80200
- [ 8.550713@0] SDHC_PDMA: 0x2c43bcf0
- [ 8.554178@0] SDHC_MISC: 0xe0000150
- [ 8.557651@0] SDHC_DATA: 0xe4ff1870
- [ 8.561142@0] SDHC_ICTL: 0x000030e6
- [ 8.564599@0] SDHC_ISTA: 0x00004549
- [ 8.568072@0] SDHC_SRST: 0x00000000
- [ 8.571554@0] SDHC_ESTA: 0x00000000
- [ 8.575019@0] SDHC_ENHC: 0x00fe0cff
- [ 8.578493@0] SDHC_CLK2: 0x0000100f
- [ 8.582082@0] mmcblk0: response CRC error sending r/w cmd command, card status 0xb00
- [ 8.590242@0] [aml_sdhc_print_err][0;40;32m sd: data CRC error, port=4, Cmd18 Arg 00000008, xfer_step=3, status=4, cmd25=0, fifo_empty=0, fifo_full=0, timeout=0, Xfer 4096 Bytes, SEND=0x700d2, iSTA=0x4549, STAT=0x30
- [0mPinmux: REG QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0; QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement