Guest User

Untitled

a guest
Jun 20th, 2012
313
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.21 KB | None | 0 0
  1. $ smartctl --all /dev/sda
  2. smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.3-1-ARCH] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. Smartctl open device: /dev/sda failed: Permission denied
  6. [eugeno@toshiba ~]$ sudo smartctl --all /dev/sda
  7. Password:
  8. smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.3-1-ARCH] (local build)
  9. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  10.  
  11. === START OF INFORMATION SECTION ===
  12. Model Family: Toshiba 2.5" HDD MK..52GSX
  13. Device Model: TOSHIBA MK2552GSX
  14. Serial Number: 985GC1DIT
  15. LU WWN Device Id: 5 000039 143a80718
  16. Firmware Version: LV010M
  17. User Capacity: 250,059,350,016 bytes [250 GB]
  18. Sector Size: 512 bytes logical/physical
  19. Device is: In smartctl database [for details use: -P show]
  20. ATA Version is: 8
  21. ATA Standard is: Exact ATA specification draft version not indicated
  22. Local Time is: Wed Jun 20 15:55:33 2012 FET
  23. SMART support is: Available - device has SMART capability.
  24. SMART support is: Enabled
  25.  
  26. === START OF READ SMART DATA SECTION ===
  27. SMART overall-health self-assessment test result: PASSED
  28.  
  29. General SMART Values:
  30. Offline data collection status: (0x02) Offline data collection activity
  31. was completed without error.
  32. Auto Offline Data Collection: Disabled.
  33. Self-test execution status: ( 0) The previous self-test routine completed
  34. without error or no self-test has ever
  35. been run.
  36. Total time to complete Offline
  37. data collection: ( 120) seconds.
  38. Offline data collection
  39. capabilities: (0x5b) SMART execute Offline immediate.
  40. Auto Offline data collection on/off support.
  41. Suspend Offline collection upon new
  42. command.
  43. Offline surface scan supported.
  44. Self-test supported.
  45. No Conveyance Self-test supported.
  46. Selective Self-test supported.
  47. SMART capabilities: (0x0003) Saves SMART data before entering
  48. power-saving mode.
  49. Supports SMART auto save timer.
  50. Error logging capability: (0x01) Error logging supported.
  51. General Purpose Logging supported.
  52. Short self-test routine
  53. recommended polling time: ( 2) minutes.
  54. Extended self-test routine
  55. recommended polling time: ( 118) minutes.
  56. SCT capabilities: (0x0039) SCT Status supported.
  57. SCT Error Recovery Control supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  64. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  65. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  66. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1625
  67. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5241
  68. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
  69. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  70. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  71. 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 8311
  72. 10 Spin_Retry_Count 0x0033 204 100 030 Pre-fail Always - 0
  73. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4275
  74. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 46
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8716359
  76. 193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 205820
  77. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 37 (Min/Max 9/51)
  78. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  79. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  80. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  81. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  82. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8365
  83. 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6271
  84. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  85. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  86. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 322
  87. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  88.  
  89. SMART Error Log Version: 1
  90. ATA Error Count: 32 (device log contains only the most recent five errors)
  91. CR = Command Register [HEX]
  92. FR = Features Register [HEX]
  93. SC = Sector Count Register [HEX]
  94. SN = Sector Number Register [HEX]
  95. CL = Cylinder Low Register [HEX]
  96. CH = Cylinder High Register [HEX]
  97. DH = Device/Head Register [HEX]
  98. DC = Device Command Register [HEX]
  99. ER = Error register [HEX]
  100. ST = Status register [HEX]
  101. Powered_Up_Time is measured from power on, and printed as
  102. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  103. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  104.  
  105. Error 32 occurred at disk power-on lifetime: 2428 hours (101 days + 4 hours)
  106. When the command that caused the error occurred, the device was active or idle.
  107.  
  108. After command completion occurred, registers were:
  109. ER ST SC SN CL CH DH
  110. -- -- -- -- -- -- --
  111. 40 41 ca f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
  112.  
  113. Commands leading to the command that caused the error were:
  114. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  115. -- -- -- -- -- -- -- -- ---------------- --------------------
  116. 61 08 f8 08 e8 8c 40 00 16:41:01.608 WRITE FPDMA QUEUED
  117. 61 08 f0 28 f0 8d 40 00 16:41:01.607 WRITE FPDMA QUEUED
  118. 61 10 e8 80 0b 17 40 00 16:41:00.469 WRITE FPDMA QUEUED
  119. 61 08 e0 e0 ed 1f 40 00 16:41:00.469 WRITE FPDMA QUEUED
  120. 61 08 d8 a0 c1 3b 40 00 16:41:00.469 WRITE FPDMA QUEUED
  121.  
  122. Error 31 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
  123. When the command that caused the error occurred, the device was active or idle.
  124.  
  125. After command completion occurred, registers were:
  126. ER ST SC SN CL CH DH
  127. -- -- -- -- -- -- --
  128. 40 41 1a f8 74 d7 69 Error: UNC at LBA = 0x09d774f8 = 165115128
  129.  
  130. Commands leading to the command that caused the error were:
  131. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  132. -- -- -- -- -- -- -- -- ---------------- --------------------
  133. 60 a0 18 80 74 d7 40 00 08:56:45.860 READ FPDMA QUEUED
  134. 2f 00 01 10 00 00 40 00 08:56:45.860 READ LOG EXT
  135. 61 08 10 f8 e7 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
  136. 61 08 08 08 e8 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
  137. 61 40 00 08 48 8e 40 00 08:56:43.378 WRITE FPDMA QUEUED
  138.  
  139. Error 30 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
  140. When the command that caused the error occurred, the device was active or idle.
  141.  
  142. After command completion occurred, registers were:
  143. ER ST SC SN CL CH DH
  144. -- -- -- -- -- -- --
  145. 40 41 c2 f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
  146.  
  147. Commands leading to the command that caused the error were:
  148. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  149. -- -- -- -- -- -- -- -- ---------------- --------------------
  150. 61 08 10 f8 e7 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
  151. 61 08 08 08 e8 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
  152. 61 40 00 08 48 8e 40 00 08:56:43.378 WRITE FPDMA QUEUED
  153. 60 20 f8 40 4e 9f 40 00 08:56:41.275 READ FPDMA QUEUED
  154. 61 08 f0 d0 40 9f 40 00 08:56:41.275 WRITE FPDMA QUEUED
  155.  
  156. Error 29 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
  157. When the command that caused the error occurred, the device was active or idle.
  158.  
  159. After command completion occurred, registers were:
  160. ER ST SC SN CL CH DH
  161. -- -- -- -- -- -- --
  162. 40 41 8a f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
  163.  
  164. Commands leading to the command that caused the error were:
  165. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  166. -- -- -- -- -- -- -- -- ---------------- --------------------
  167. 61 08 b8 d8 14 40 40 00 08:56:39.254 WRITE FPDMA QUEUED
  168. 61 05 b0 e0 14 40 40 00 08:56:39.244 WRITE FPDMA QUEUED
  169. 61 08 a8 f0 e7 8c 40 00 08:56:38.372 WRITE FPDMA QUEUED
  170. 61 08 a0 00 e8 8c 40 00 08:56:38.371 WRITE FPDMA QUEUED
  171. 61 18 98 f0 47 8e 40 00 08:56:38.371 WRITE FPDMA QUEUED
  172.  
  173. Error 28 occurred at disk power-on lifetime: 2095 hours (87 days + 7 hours)
  174. When the command that caused the error occurred, the device was active or idle.
  175.  
  176. After command completion occurred, registers were:
  177. ER ST SC SN CL CH DH
  178. -- -- -- -- -- -- --
  179. 40 41 5a f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
  180.  
  181. Commands leading to the command that caused the error were:
  182. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  183. -- -- -- -- -- -- -- -- ---------------- --------------------
  184. 61 08 68 00 e8 8c 40 00 01:10:13.585 WRITE FPDMA QUEUED
  185. 61 20 60 28 04 8e 40 00 01:10:13.585 WRITE FPDMA QUEUED
  186. 60 a0 58 80 74 d7 40 00 01:10:12.792 READ FPDMA QUEUED
  187. 61 20 50 40 56 7d 40 00 01:10:12.792 WRITE FPDMA QUEUED
  188. 60 20 48 20 ad 95 40 00 01:10:12.791 READ FPDMA QUEUED
  189.  
  190. SMART Self-test log structure revision number 1
  191. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  192. # 1 Short offline Completed without error 00% 0 -
  193.  
  194. SMART Selective self-test log data structure revision number 1
  195. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  196. 1 0 0 Not_testing
  197. 2 0 0 Not_testing
  198. 3 0 0 Not_testing
  199. 4 0 0 Not_testing
  200. 5 0 0 Not_testing
  201. Selective self-test flags (0x0):
  202. After scanning selected spans, do NOT read-scan remainder of disk.
  203. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment