API tools faq
paste
Advertisement
Guest User

SMART

a guest
Sep 27th, 2013
58
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.08 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-30-generic] (local build)
  2. Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Toshiba 2.5" HDD MK..59GSM (Adv. Format)
  6. Device Model: TOSHIBA MK1059GSM
  7. Serial Number: 71B2P124T
  8. LU WWN Device Id: 5 000039 3622035f4
  9. Firmware Version: GL001J
  10. User Capacity: 1,000,203,804,160 bytes [1.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Fri Sep 27 17:47:55 2013 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: FAILED!
  21. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  22. See vendor-specific Attribute list for failed Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 73) The previous self-test completed having
  29. a test element that failed and the test
  30. element that failed is not known.
  31. Total time to complete Offline
  32. data collection: ( 120) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 310) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  61. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 3146
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3220
  63. 5 Reallocated_Sector_Ct 0x0033 001 001 050 Pre-fail Always FAILING_NOW 16376
  64. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  66. 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 5233
  67. 10 Spin_Retry_Count 0x0033 164 100 030 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3023
  69. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 13672
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 114
  71. 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 28224
  72. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 11/46)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 613
  74. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  77. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 16448
  78. 222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4290
  79. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  80. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  81. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 266
  82. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 3573 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 3573 occurred at disk power-on lifetime: 5174 hours (215 days + 14 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 04 41 90 b8 b4 71 60 Error: ABRT at LBA = 0x0071b4b8 = 7451832
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 61 48 88 80 c8 7d 40 00 00:14:02.704 WRITE FPDMA QUEUED
  112. 61 48 80 c0 b4 7d 40 00 00:14:01.639 WRITE FPDMA QUEUED
  113. 61 48 78 c0 b3 7d 40 00 00:14:01.634 WRITE FPDMA QUEUED
  114. 61 48 70 00 b2 7d 40 00 00:14:01.628 WRITE FPDMA QUEUED
  115. 61 d8 68 d0 51 7d 40 00 00:14:01.621 WRITE FPDMA QUEUED
  116.  
  117. Error 3572 occurred at disk power-on lifetime: 5165 hours (215 days + 5 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 04 41 50 98 d0 04 60 Error: ABRT at LBA = 0x0004d098 = 315544
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 60 88 08 c8 fd a7 40 00 00:01:33.318 READ FPDMA QUEUED
  129. 60 70 00 50 f8 87 40 00 00:01:33.186 READ FPDMA QUEUED
  130. 61 b0 78 40 21 c4 40 00 00:01:33.092 WRITE FPDMA QUEUED
  131. 60 00 70 30 7f a8 40 00 00:01:33.092 READ FPDMA QUEUED
  132. 60 08 68 b8 64 8b 40 00 00:01:33.092 READ FPDMA QUEUED
  133.  
  134. Error 3571 occurred at disk power-on lifetime: 5165 hours (215 days + 5 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 30 00 01 01 00 00 00
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. aa aa aa aa aa aa aa ff 00:01:32.708 [RESERVED]
  146. 2f 00 01 10 00 00 a0 00 00:01:32.693 READ LOG EXT
  147. 60 20 70 30 f8 87 40 00 00:01:31.910 READ FPDMA QUEUED
  148. 61 18 68 20 2d 04 40 00 00:01:30.350 WRITE FPDMA QUEUED
  149. 61 60 60 98 f9 0d 40 00 00:01:30.350 WRITE FPDMA QUEUED
  150.  
  151. Error 3570 occurred at disk power-on lifetime: 5165 hours (215 days + 5 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 04 01 10 f8 6b 04 60 Error: ABRT at LBA = 0x00046bf8 = 289784
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 60 20 70 30 f8 87 40 00 00:01:31.910 READ FPDMA QUEUED
  163. 61 18 68 20 2d 04 40 00 00:01:30.350 WRITE FPDMA QUEUED
  164. 61 60 60 98 f9 0d 40 00 00:01:30.350 WRITE FPDMA QUEUED
  165. 61 08 58 10 1c 09 40 00 00:01:30.350 WRITE FPDMA QUEUED
  166. 60 00 50 e0 cf 2d 40 00 00:01:29.111 READ FPDMA QUEUED
  167.  
  168. Error 3569 occurred at disk power-on lifetime: 5162 hours (215 days + 2 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 04 51 00 9f 28 04 e0 Error: ABRT at LBA = 0x0004289f = 272543
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. ca 00 10 90 28 04 e0 00 00:01:19.041 WRITE DMA
  180. ef 10 02 00 00 00 a0 00 00:01:19.041 SET FEATURES [Reserved for Serial ATA]
  181. 27 00 00 00 00 00 e0 00 00:01:19.041 READ NATIVE MAX ADDRESS EXT
  182. ec 00 00 00 00 00 a0 00 00:01:19.040 IDENTIFY DEVICE
  183. ef 03 45 00 00 00 a0 00 00:01:19.040 SET FEATURES [Set transfer mode]
  184.  
  185. SMART Self-test log structure revision number 1
  186. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  187. # 1 Extended offline Completed: unknown failure 90% 5233 0
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!