API tools faq
paste
Guest User

DM-2

a guest
Aug 1st, 2012
41
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.94 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.43 2012-06-30 r3573 [i686-linux-3.2.0-23-generic-pae] (local build)
  2. Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
  6. Device Model: ST1000DM003-9YN162
  7. Serial Number: W1D0Y6WT
  8. LU WWN Device Id: 5 000c50 0495fb581
  9. Firmware Version: CC4D
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Wed Aug 1 18:36:26 2012 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x00) Offline data collection activity
  24. was never started.
  25. Auto Offline Data Collection: Disabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 584) seconds.
  31. Offline data collection
  32. capabilities: (0x73) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. No Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 115) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 2) minutes.
  51. SCT capabilities: (0x3085) SCT Status supported.
  52.  
  53. SMART Attributes Data Structure revision number: 10
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x000f 097 097 006 Pre-fail Always - 130516953
  57. 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
  58. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 26
  59. 5 Reallocated_Sector_Ct 0x0033 088 051 036 Pre-fail Always - 16824
  60. 7 Seek_Error_Rate 0x000f 064 060 030 Pre-fail Always - 8595790967
  61. 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1387
  62. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 26
  64. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  65. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  66. 187 Reported_Uncorrect 0x0032 005 005 000 Old_age Always - 95
  67. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 8590065666
  68. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  69. 190 Airflow_Temperature_Cel 0x0022 068 061 045 Old_age Always - 32 (Min/Max 32/32)
  70. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 25
  72. 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2071
  73. 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 26 0 0 0)
  74. 197 Current_Pending_Sector 0x0012 100 079 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0010 100 079 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  77. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13915694040422
  78. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4723956375599
  79. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 231992472700369
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 17 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 17 occurred at disk power-on lifetime: 1386 hours (57 days + 18 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 61 00 01 d8 5d 4e 40 00 19:42:10.902 WRITE FPDMA QUEUED
  109. 61 00 22 00 12 0e 40 00 19:42:10.902 WRITE FPDMA QUEUED
  110. 61 00 18 ff ff ff 4f 00 19:42:10.902 WRITE FPDMA QUEUED
  111. 61 00 10 ff ff ff 4f 00 19:42:10.901 WRITE FPDMA QUEUED
  112. 61 00 08 ff ff ff 4f 00 19:42:10.901 WRITE FPDMA QUEUED
  113.  
  114. Error 16 occurred at disk power-on lifetime: 1143 hours (47 days + 15 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 42 00 00 ff ff ff 4f 00 13d+23:20:30.424 READ VERIFY SECTOR(S) EXT
  126. 42 00 00 ff ff ff 4f 00 13d+23:20:27.575 READ VERIFY SECTOR(S) EXT
  127. 42 00 00 ff ff ff 4f 00 13d+23:20:24.649 READ VERIFY SECTOR(S) EXT
  128. 42 00 00 ff ff ff 4f 00 13d+23:20:21.930 READ VERIFY SECTOR(S) EXT
  129. 42 00 00 ff ff ff 4f 00 13d+23:20:19.254 READ VERIFY SECTOR(S) EXT
  130.  
  131. Error 15 occurred at disk power-on lifetime: 1143 hours (47 days + 15 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 42 00 00 ff ff ff 4f 00 13d+23:20:27.575 READ VERIFY SECTOR(S) EXT
  143. 42 00 00 ff ff ff 4f 00 13d+23:20:24.649 READ VERIFY SECTOR(S) EXT
  144. 42 00 00 ff ff ff 4f 00 13d+23:20:21.930 READ VERIFY SECTOR(S) EXT
  145. 42 00 00 ff ff ff 4f 00 13d+23:20:19.254 READ VERIFY SECTOR(S) EXT
  146. 42 00 00 ff ff ff 4f 00 13d+23:20:16.525 READ VERIFY SECTOR(S) EXT
  147.  
  148. Error 14 occurred at disk power-on lifetime: 1143 hours (47 days + 15 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 42 00 00 ff ff ff 4f 00 13d+23:20:24.649 READ VERIFY SECTOR(S) EXT
  160. 42 00 00 ff ff ff 4f 00 13d+23:20:21.930 READ VERIFY SECTOR(S) EXT
  161. 42 00 00 ff ff ff 4f 00 13d+23:20:19.254 READ VERIFY SECTOR(S) EXT
  162. 42 00 00 ff ff ff 4f 00 13d+23:20:16.525 READ VERIFY SECTOR(S) EXT
  163. 42 00 00 ff ff ff 4f 00 13d+23:20:13.823 READ VERIFY SECTOR(S) EXT
  164.  
  165. Error 13 occurred at disk power-on lifetime: 1140 hours (47 days + 12 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 60 00 00 ff ff ff 4f 00 13d+20:27:27.286 READ FPDMA QUEUED
  177. 2f 00 01 10 00 00 00 00 13d+20:27:27.083 READ LOG EXT
  178. 60 00 00 ff ff ff 4f 00 13d+20:27:24.210 READ FPDMA QUEUED
  179. 2f 00 01 10 00 00 00 00 13d+20:27:24.000 READ LOG EXT
  180. 60 00 00 ff ff ff 4f 00 13d+20:27:21.260 READ FPDMA QUEUED
  181.  
  182. SMART Self-test log structure revision number 1
  183. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  184.  
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!