Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-35-generic-pae (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55-Ubuntu SMP Wed Dec 5 18:04:39 UTC 2012 (Ubuntu 3.2.0-35.55-generic-pae 3.2.34)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
- [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: - N/A /IFL90 , BIOS 1.16 12/31/2007
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 1 base 000000000 mask F00000000 write-back
- [ 0.000000] 2 base 100000000 mask FC0000000 write-back
- [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC
- [ 0.000000] reg 1, base: 0GB, range: 4GB, type WB
- [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
- [ 0.000000] reg 3, base: 3071MB, range: 1MB, type UC
- [ 0.000000] total RAM covered: 4095M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
- [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
- [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] found SMP MP-table at [c00f7bc0] f7bc0
- [ 0.000000] initial memory mapped : 0 - 02000000
- [ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 0037a00000 page 2M
- [ 0.000000] 0037a00000 - 0037bfe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
- [ 0.000000] RAMDISK: 359aa000 - 36ccd000
- [ 0.000000] ACPI: RSDP 000f7b40 00024 (v02 Compal)
- [ 0.000000] ACPI: XSDT bfed8622 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP bfedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
- [ 0.000000] ACPI: DSDT bfed9b51 0600D (v02 Compal CRESTLNE 06040000 INTL 20061109)
- [ 0.000000] ACPI: FACS bfee2fc0 00040
- [ 0.000000] ACPI: APIC bfedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: HPET bfedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: MCFG bfedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: TCPA bfedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: TMOR bfedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
- [ 0.000000] ACPI: SLIC bfedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
- [ 0.000000] ACPI: APIC bfedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT bfedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: SSDT bfed988c 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
- [ 0.000000] ACPI: SSDT bfed8c3a 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT bfed8b94 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT bfed86ae 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
- [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
- [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 4228MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x00037bfe
- [ 0.000000] HighMem 0x00037bfe -> 0x00140000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009b
- [ 0.000000] 0: 0x00000100 -> 0x000bfed0
- [ 0.000000] 0: 0x00100000 -> 0x00140000
- [ 0.000000] On node 0 totalpages: 1048155
- [ 0.000000] free_area_init_node: node 0, pgdat c186b1c0, node_mem_map f31aa200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3947 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1752 pages used for memmap
- [ 0.000000] Normal zone: 222502 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 8457 pages used for memmap
- [ 0.000000] HighMem zone: 811465 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000
- [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000
- [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000dc000
- [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bcf000 s34240 r0 d23104 u57344
- [ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037914
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic-pae root=UUID=8c779618-6574-40ae-8014-ddbc9e01f1de ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 20971264 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
- [ 0.000000] Memory: 4100216k/5242880k available (5825k kernel code, 92404k reserved, 2849k data, 744k init, 3279688k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- [ 0.000000] .init : 0xc1879000 - 0xc1933000 ( 744 kB)
- [ 0.000000] .data : 0xc15b05bc - 0xc1878a00 (2849 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc15b05bc (5825 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2493.803 MHz processor.
- [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.60 BogoMIPS (lpj=9975212)
- [ 0.004007] pid_max: default: 32768 minimum: 301
- [ 0.004025] Security Framework initialized
- [ 0.004041] AppArmor: AppArmor initialized
- [ 0.004043] Yama: becoming mindful.
- [ 0.004092] Mount-cache hash table entries: 512
- [ 0.004212] Initializing cgroup subsys cpuacct
- [ 0.004217] Initializing cgroup subsys memory
- [ 0.004224] Initializing cgroup subsys devices
- [ 0.004225] Initializing cgroup subsys freezer
- [ 0.004227] Initializing cgroup subsys blkio
- [ 0.004233] Initializing cgroup subsys perf_event
- [ 0.004258] CPU: Physical Processor ID: 0
- [ 0.004260] CPU: Processor Core ID: 0
- [ 0.004263] mce: CPU supports 6 MCE banks
- [ 0.004270] CPU0: Thermal monitoring handled by SMI
- [ 0.004273] using mwait in idle threads.
- [ 0.008402] ACPI: Core revision 20110623
- [ 0.012013] ftrace: allocating 26576 entries in 53 pages
- [ 0.016036] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.020155] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.059838] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
- [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- [ 0.060003] ... version: 2
- [ 0.060003] ... bit width: 40
- [ 0.060003] ... generic registers: 2
- [ 0.060003] ... value mask: 000000ffffffffff
- [ 0.060003] ... max period: 000000007fffffff
- [ 0.060003] ... fixed-purpose events: 3
- [ 0.060003] ... event mask: 0000000700000003
- [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.060003] CPU 1 irqstacks, hard=f74ea000 soft=f74ec000
- [ 0.060003] Booting Node 0, Processors #1 Ok.
- [ 0.060003] smpboot cpu 1: start_ip = 97000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU1: Thermal monitoring handled by SMI
- [ 0.148037] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.148075] Brought up 2 CPUs
- [ 0.148078] Total of 2 processors activated (9975.04 BogoMIPS).
- [ 0.151187] devtmpfs: initialized
- [ 0.151187] EVM: security.selinux
- [ 0.151187] EVM: security.SMACK64
- [ 0.151187] EVM: security.capability
- [ 0.151187] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
- [ 0.152518] print_constraints: dummy:
- [ 0.152554] RTC time: 21:04:34, date: 01/07/13
- [ 0.152590] NET: Registered protocol family 16
- [ 0.152616] Trying to unpack rootfs image as initramfs...
- [ 0.152715] EISA bus registered
- [ 0.152730] ACPI: bus type pci registered
- [ 0.152792] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.152795] PCI: not using MMCONFIG
- [ 0.152962] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
- [ 0.153187] PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
- [ 0.153189] PCI: Using configuration type 1 for base access
- [ 0.154273] bio: create slab <bio-0> at 0
- [ 0.154347] ACPI: Added _OSI(Module Device)
- [ 0.154349] ACPI: Added _OSI(Processor Device)
- [ 0.154351] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.154354] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.155609] ACPI: EC: Look up EC in DSDT
- [ 0.157931] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.158466] ACPI: SSDT bfed9508 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.158771] ACPI: Dynamic OEM Table Load:
- [ 0.158774] ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.158896] ACPI: SSDT bfed8e99 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.159184] ACPI: Dynamic OEM Table Load:
- [ 0.159187] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.159398] ACPI: SSDT bfed97c4 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.159695] ACPI: Dynamic OEM Table Load:
- [ 0.159697] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.159781] ACPI: SSDT bfed9483 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.160081] ACPI: Dynamic OEM Table Load:
- [ 0.160084] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.160377] ACPI: Interpreter enabled
- [ 0.160381] ACPI: (supports S0 S3 S4 S5)
- [ 0.160399] ACPI: Using IOAPIC for interrupt routing
- [ 0.160411] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.161106] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.161108] PCI: Using MMCONFIG for extended config space
- [ 0.200770] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
- [ 0.200913] ACPI: No dock devices found.
- [ 0.200916] HEST: Table not found.
- [ 0.200921] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.201270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.201922] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.201925] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.201928] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.201931] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
- [ 0.201934] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
- [ 0.201936] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
- [ 0.201948] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
- [ 0.201997] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
- [ 0.202044] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.202048] pci 0000:00:01.0: PME# disabled
- [ 0.202103] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
- [ 0.202160] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
- [ 0.202204] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
- [ 0.202262] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
- [ 0.202321] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
- [ 0.202345] pci 0000:00:1a.7: reg 10: [mem 0xf8504800-0xf8504bff]
- [ 0.202454] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.202459] pci 0000:00:1a.7: PME# disabled
- [ 0.202491] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
- [ 0.202514] pci 0000:00:1b.0: reg 10: [mem 0xf8500000-0xf8503fff 64bit]
- [ 0.202623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.202628] pci 0000:00:1b.0: PME# disabled
- [ 0.202658] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
- [ 0.202772] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.202777] pci 0000:00:1c.0: PME# disabled
- [ 0.202810] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
- [ 0.202924] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.202929] pci 0000:00:1c.1: PME# disabled
- [ 0.202962] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
- [ 0.203074] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.203080] pci 0000:00:1c.2: PME# disabled
- [ 0.203114] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
- [ 0.203226] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.203231] pci 0000:00:1c.3: PME# disabled
- [ 0.203265] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
- [ 0.203380] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.203385] pci 0000:00:1c.4: PME# disabled
- [ 0.203418] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
- [ 0.203531] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.203536] pci 0000:00:1c.5: PME# disabled
- [ 0.203567] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
- [ 0.203625] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
- [ 0.203670] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
- [ 0.203728] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
- [ 0.203771] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
- [ 0.203829] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
- [ 0.203887] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
- [ 0.203912] pci 0000:00:1d.7: reg 10: [mem 0xf8504c00-0xf8504fff]
- [ 0.204031] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.204036] pci 0000:00:1d.7: PME# disabled
- [ 0.204060] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 0.204160] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
- [ 0.204277] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
- [ 0.204283] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
- [ 0.204288] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
- [ 0.204294] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
- [ 0.204299] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
- [ 0.204356] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
- [ 0.204375] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- [ 0.204387] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- [ 0.204399] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- [ 0.204412] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- [ 0.204424] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
- [ 0.204479] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
- [ 0.204507] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
- [ 0.204519] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
- [ 0.204531] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
- [ 0.204543] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
- [ 0.204556] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
- [ 0.204568] pci 0000:00:1f.2: reg 24: [mem 0xf8504000-0xf85047ff]
- [ 0.204636] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.204641] pci 0000:00:1f.2: PME# disabled
- [ 0.204662] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
- [ 0.204680] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
- [ 0.204724] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
- [ 0.204808] pci 0000:01:00.0: [1002:95c4] type 0 class 0x000300
- [ 0.204829] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.204847] pci 0000:01:00.0: reg 18: [mem 0xc7ef0000-0xc7efffff 64bit]
- [ 0.204858] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
- [ 0.204879] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.204930] pci 0000:01:00.0: supports D1 D2
- [ 0.204961] pci 0000:01:00.1: [1002:aa28] type 0 class 0x000403
- [ 0.204982] pci 0000:01:00.1: reg 10: [mem 0xc7eec000-0xc7eeffff 64bit]
- [ 0.205083] pci 0000:01:00.1: supports D1 D2
- [ 0.205129] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.205133] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
- [ 0.205136] pci 0000:00:01.0: bridge window [mem 0xc7e00000-0xc7efffff]
- [ 0.205140] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.205203] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.205208] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.205213] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
- [ 0.205221] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
- [ 0.205397] pci 0000:04:00.0: [14e4:1693] type 0 class 0x000200
- [ 0.205468] pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
- [ 0.205896] pci 0000:04:00.0: PME# supported from D3hot D3cold
- [ 0.205907] pci 0000:04:00.0: PME# disabled
- [ 0.206058] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
- [ 0.206064] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
- [ 0.206069] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
- [ 0.206077] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
- [ 0.206140] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
- [ 0.206145] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
- [ 0.206150] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
- [ 0.206158] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
- [ 0.206220] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
- [ 0.206225] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
- [ 0.206230] pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
- [ 0.206239] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
- [ 0.206332] pci 0000:0a:00.0: [8086:444e] type 0 class 0x000580
- [ 0.206360] pci 0000:0a:00.0: reg 10: [mem 0xf8100000-0xf81003ff]
- [ 0.206398] pci 0000:0a:00.0: reg 18: [io 0x7000-0x707f]
- [ 0.206472] pci 0000:0a:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- [ 0.212034] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
- [ 0.212039] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
- [ 0.212044] pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff]
- [ 0.212156] pci 0000:0c:00.0: [168c:001c] type 0 class 0x000200
- [ 0.212204] pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf800ffff 64bit]
- [ 0.212495] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.212511] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
- [ 0.212520] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
- [ 0.212581] pci 0000:0e:06.0: [1180:0832] type 0 class 0x000c00
- [ 0.212597] pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
- [ 0.212599] pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
- [ 0.212615] pci 0000:0e:06.0: reg 10: [mem 0xf8200000-0xf82007ff]
- [ 0.212712] pci 0000:0e:06.0: supports D1 D2
- [ 0.212714] pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.212719] pci 0000:0e:06.0: PME# disabled
- [ 0.212740] pci 0000:0e:06.1: [1180:0822] type 0 class 0x000805
- [ 0.212761] pci 0000:0e:06.1: reg 10: [mem 0xf8200800-0xf82008ff]
- [ 0.212860] pci 0000:0e:06.1: supports D1 D2
- [ 0.212862] pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.212867] pci 0000:0e:06.1: PME# disabled
- [ 0.212888] pci 0000:0e:06.2: [1180:0592] type 0 class 0x000880
- [ 0.212909] pci 0000:0e:06.2: reg 10: [mem 0xf8201000-0xf82010ff]
- [ 0.213006] pci 0000:0e:06.2: supports D1 D2
- [ 0.213008] pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.213013] pci 0000:0e:06.2: PME# disabled
- [ 0.213071] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
- [ 0.213079] pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
- [ 0.213087] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.213090] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
- [ 0.213140] pci_bus 0000:00: on NUMA node 0
- [ 0.213143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.213322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
- [ 0.213375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.213419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.213464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
- [ 0.213508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
- [ 0.213552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
- [ 0.213597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
- [ 0.213664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 0.213711] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.213714] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.213716] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.219406] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
- [ 0.219458] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.219507] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
- [ 0.219554] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.219602] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.219648] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 0.219694] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.219742] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.219874] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.219880] vgaarb: loaded
- [ 0.219881] vgaarb: bridge control possible 0000:01:00.0
- [ 0.219994] i2c-core: driver [aat2870] using legacy suspend method
- [ 0.219996] i2c-core: driver [aat2870] using legacy resume method
- [ 0.220089] SCSI subsystem initialized
- [ 0.220144] libata version 3.00 loaded.
- [ 0.220188] usbcore: registered new interface driver usbfs
- [ 0.220199] usbcore: registered new interface driver hub
- [ 0.220226] usbcore: registered new device driver usb
- [ 0.220320] PCI: Using ACPI for IRQ routing
- [ 0.220589] PCI: pci_cache_line_size set to 64 bytes
- [ 0.220597] pci 0000:00:1c.3: address space collision: [mem 0xb8000000-0xbbffffff] conflicts with System RAM [mem 0x00100000-0xbfecffff]
- [ 0.220777] reserve RAM buffer: 000000000009b400 - 000000000009ffff
- [ 0.220779] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
- [ 0.220882] NetLabel: Initializing
- [ 0.220884] NetLabel: domain hash size = 128
- [ 0.220886] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.220897] NetLabel: unlabeled traffic allowed by default
- [ 0.220940] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.220947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.220951] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.224265] Switching to clocksource hpet
- [ 0.231973] AppArmor: AppArmor Filesystem Enabled
- [ 0.232016] pnp: PnP ACPI init
- [ 0.232031] ACPI: bus type pnp registered
- [ 0.232405] pnp 00:00: [bus 00-ff]
- [ 0.232408] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.232410] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.232412] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.232417] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.232419] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 0.232421] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 0.232424] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 0.232426] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 0.232428] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 0.232430] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 0.232432] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 0.232435] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 0.232437] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 0.232439] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 0.232441] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 0.232444] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 0.232446] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 0.232448] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
- [ 0.232450] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- [ 0.232453] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
- [ 0.232508] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.232585] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
- [ 0.232587] pnp 00:01: [mem 0xfed14000-0xfed17fff]
- [ 0.232589] pnp 00:01: [mem 0xfed18000-0xfed18fff]
- [ 0.232591] pnp 00:01: [mem 0xfed19000-0xfed19fff]
- [ 0.232593] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.232595] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
- [ 0.232597] pnp 00:01: [mem 0xfed40000-0xfed44fff]
- [ 0.232599] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
- [ 0.232666] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.232669] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
- [ 0.232672] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.232674] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.232677] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.232680] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.232682] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.232685] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.232688] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.232881] pnp 00:02: [io 0x0000-0x001f]
- [ 0.232883] pnp 00:02: [io 0x0081-0x0091]
- [ 0.232885] pnp 00:02: [io 0x0093-0x009f]
- [ 0.232887] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.232890] pnp 00:02: [dma 4]
- [ 0.232927] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.232936] pnp 00:03: [mem 0xff000000-0xffffffff]
- [ 0.232973] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.233035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
- [ 0.233097] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
- [ 0.233101] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- [ 0.233112] pnp 00:05: [io 0x00f0]
- [ 0.233124] pnp 00:05: [irq 13]
- [ 0.233162] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.233173] pnp 00:06: [io 0x002e-0x002f]
- [ 0.233175] pnp 00:06: [io 0x0061]
- [ 0.233177] pnp 00:06: [io 0x0063]
- [ 0.233179] pnp 00:06: [io 0x0065]
- [ 0.233181] pnp 00:06: [io 0x0067]
- [ 0.233182] pnp 00:06: [io 0x0068]
- [ 0.233184] pnp 00:06: [io 0x006c]
- [ 0.233186] pnp 00:06: [io 0x0080]
- [ 0.233188] pnp 00:06: [io 0x0092]
- [ 0.233190] pnp 00:06: [io 0x00b2-0x00b3]
- [ 0.233192] pnp 00:06: [io 0x0680-0x069f]
- [ 0.233194] pnp 00:06: [io 0x0800-0x080f]
- [ 0.233196] pnp 00:06: [io 0x1000-0x107f]
- [ 0.233198] pnp 00:06: [io 0x1180-0x11bf]
- [ 0.233199] pnp 00:06: [io 0x1640-0x164f]
- [ 0.233201] pnp 00:06: [io 0xfe00]
- [ 0.233203] pnp 00:06: [io 0xff00-0xff7f]
- [ 0.233279] system 00:06: [io 0x0680-0x069f] has been reserved
- [ 0.233281] system 00:06: [io 0x0800-0x080f] has been reserved
- [ 0.233284] system 00:06: [io 0x1000-0x107f] has been reserved
- [ 0.233286] system 00:06: [io 0x1180-0x11bf] has been reserved
- [ 0.233291] system 00:06: [io 0x1640-0x164f] has been reserved
- [ 0.233294] system 00:06: [io 0xfe00] has been reserved
- [ 0.233296] system 00:06: [io 0xff00-0xff7f] has been reserved
- [ 0.233299] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.233308] pnp 00:07: [io 0x0070-0x0077]
- [ 0.233314] pnp 00:07: [irq 8]
- [ 0.233354] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.252056] pnp 00:08: [io 0x0060]
- [ 0.252059] pnp 00:08: [io 0x0064]
- [ 0.252066] pnp 00:08: [irq 1]
- [ 0.252115] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.252127] pnp 00:09: [irq 12]
- [ 0.252171] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 0.252194] pnp: PnP ACPI: found 10 devices
- [ 0.252195] ACPI: ACPI bus type pnp unregistered
- [ 0.252199] PnPBIOS: Disabled by ACPI PNP
- [ 0.288534] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.288632] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc40fffff pref]
- [ 0.288635] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4100000-0xc41000ff]
- [ 0.288642] pci 0000:00:1f.3: BAR 0: set to [mem 0xc4100000-0xc41000ff] (PCI address [0xc4100000-0xc41000ff])
- [ 0.288646] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
- [ 0.288651] pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
- [ 0.288655] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4400000-0xc46fffff pref]
- [ 0.288658] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc4700000-0xc4afffff]
- [ 0.288662] pci 0000:01:00.0: BAR 6: assigned [mem 0xc7e00000-0xc7e1ffff pref]
- [ 0.288665] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.288668] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
- [ 0.288672] pci 0000:00:01.0: bridge window [mem 0xc7e00000-0xc7efffff]
- [ 0.288675] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.288680] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.288683] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.288690] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
- [ 0.288695] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
- [ 0.288704] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
- [ 0.288707] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
- [ 0.288713] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
- [ 0.288718] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
- [ 0.288726] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
- [ 0.288730] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
- [ 0.288736] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
- [ 0.288742] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
- [ 0.288750] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
- [ 0.288753] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
- [ 0.288760] pci 0000:00:1c.3: bridge window [mem 0xc4700000-0xc4afffff]
- [ 0.288765] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
- [ 0.288774] pci 0000:0a:00.0: BAR 6: assigned [mem 0xc4400000-0xc440ffff pref]
- [ 0.288776] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
- [ 0.288780] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
- [ 0.288786] pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff]
- [ 0.288791] pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc46fffff pref]
- [ 0.288799] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
- [ 0.288803] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
- [ 0.288809] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
- [ 0.288814] pci 0000:00:1c.5: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
- [ 0.288822] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
- [ 0.288829] pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
- [ 0.288858] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.288862] pci 0000:00:01.0: setting latency timer to 64
- [ 0.288873] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.288878] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.288886] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.288891] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.288902] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.288908] pci 0000:00:1c.2: setting latency timer to 64
- [ 0.288920] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.288925] pci 0000:00:1c.3: setting latency timer to 64
- [ 0.288933] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.288938] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.288946] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.288951] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.288960] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.288964] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.288966] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.288969] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
- [ 0.288971] pci_bus 0000:01: resource 1 [mem 0xc7e00000-0xc7efffff]
- [ 0.288973] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.288976] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
- [ 0.288978] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
- [ 0.288981] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
- [ 0.288983] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
- [ 0.288985] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
- [ 0.288988] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
- [ 0.288990] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
- [ 0.288993] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
- [ 0.288995] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
- [ 0.288997] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
- [ 0.289000] pci_bus 0000:08: resource 1 [mem 0xc4700000-0xc4afffff]
- [ 0.289002] pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
- [ 0.289004] pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
- [ 0.289007] pci_bus 0000:0a: resource 1 [mem 0xf8100000-0xf81fffff]
- [ 0.289009] pci_bus 0000:0a: resource 2 [mem 0xc4400000-0xc46fffff pref]
- [ 0.289011] pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
- [ 0.289014] pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
- [ 0.289016] pci_bus 0000:0c: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
- [ 0.289019] pci_bus 0000:0e: resource 1 [mem 0xf8200000-0xf82fffff]
- [ 0.289021] pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
- [ 0.289023] pci_bus 0000:0e: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.289067] NET: Registered protocol family 2
- [ 0.289136] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.289370] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.289835] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.290057] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.290059] TCP reno registered
- [ 0.290061] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.290071] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.290129] NET: Registered protocol family 1
- [ 0.290146] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.290166] pci 0000:00:1a.0: PCI INT A disabled
- [ 0.290177] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.290196] pci 0000:00:1a.1: PCI INT B disabled
- [ 0.290206] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.290236] pci 0000:00:1a.7: PCI INT C disabled
- [ 0.290264] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.290283] pci 0000:00:1d.0: PCI INT A disabled
- [ 0.290290] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.290309] pci 0000:00:1d.1: PCI INT B disabled
- [ 0.290317] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.290335] pci 0000:00:1d.2: PCI INT C disabled
- [ 0.290344] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.290362] pci 0000:00:1d.7: PCI INT A disabled
- [ 0.290381] pci 0000:01:00.0: Boot video device
- [ 0.290442] PCI: CLS 64 bytes, default 64
- [ 0.290449] Simple Boot Flag at 0x38 set to 0x1
- [ 0.290757] audit: initializing netlink socket (disabled)
- [ 0.290765] type=2000 audit(1357592674.284:1): initialized
- [ 0.310443] highmem bounce pool size: 64 pages
- [ 0.310449] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.312793] VFS: Disk quotas dquot_6.5.2
- [ 0.312852] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.313373] fuse init (API version 7.17)
- [ 0.313460] msgmni has been set to 1602
- [ 0.313761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.313789] io scheduler noop registered
- [ 0.313791] io scheduler deadline registered
- [ 0.313797] io scheduler cfq registered (default)
- [ 0.313921] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.313955] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.314008] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.314064] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.314143] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.314198] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
- [ 0.314277] pcieport 0000:00:1c.2: setting latency timer to 64
- [ 0.314333] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
- [ 0.314413] pcieport 0000:00:1c.3: setting latency timer to 64
- [ 0.314468] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
- [ 0.314548] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.314603] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
- [ 0.314682] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.314737] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
- [ 0.314841] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.314865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.314940] intel_idle: MWAIT substates: 0x3122220
- [ 0.314942] intel_idle: does not run on family 6 model 23
- [ 0.317329] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.319777] ACPI: AC Adapter [ACAD] (on-line)
- [ 0.319865] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.319885] ACPI: Lid Switch [LID0]
- [ 0.319926] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 0.319931] ACPI: Power Button [PWRB]
- [ 0.319980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.319983] ACPI: Power Button [PWRF]
- [ 0.321997] Monitor-Mwait will be used to enter C-1 state
- [ 0.322003] Monitor-Mwait will be used to enter C-2 state
- [ 0.322008] Monitor-Mwait will be used to enter C-3 state
- [ 0.322012] Marking TSC unstable due to TSC halts in idle
- [ 0.322023] ACPI: acpi_idle registered with cpuidle
- [ 0.348223] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.348232] ACPI: Battery Slot [BAT1] (battery present)
- [ 0.348259] ERST: Table is not found!
- [ 0.348260] GHES: HEST is not enabled!
- [ 0.348349] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.348684] isapnp: Scanning for PnP cards...
- [ 0.368332] ACPI: Battery Slot [BAT1] (battery present)
- [ 0.521117] Freeing initrd memory: 19596k freed
- [ 0.702748] isapnp: No Plug & Play device found
- [ 0.756511] Linux agpgart interface v0.103
- [ 0.758249] brd: module loaded
- [ 0.759046] loop: module loaded
- [ 0.759190] ahci 0000:00:1f.2: version 3.0
- [ 0.759206] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.759259] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
- [ 0.759335] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
- [ 0.759339] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
- [ 0.759345] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.759900] scsi0 : ahci
- [ 0.759992] scsi1 : ahci
- [ 0.760084] scsi2 : ahci
- [ 0.760212] ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 47
- [ 0.760216] ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 47
- [ 0.760219] ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 47
- [ 0.760301] ata_piix 0000:00:1f.1: version 2.13
- [ 0.760309] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.760348] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.760664] scsi3 : ata_piix
- [ 0.760742] scsi4 : ata_piix
- [ 0.761103] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
- [ 0.761105] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
- [ 0.761479] Fixed MDIO Bus: probed
- [ 0.761498] tun: Universal TUN/TAP device driver, 1.6
- [ 0.761500] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.761651] PPP generic driver version 2.4.2
- [ 0.761761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.761776] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.761788] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.761792] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.761837] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.761870] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.765751] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
- [ 0.765765] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
- [ 0.780019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.780161] hub 1-0:1.0: USB hub found
- [ 0.780165] hub 1-0:1.0: 4 ports detected
- [ 0.780240] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.780252] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.780255] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.780302] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.780330] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.784215] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- [ 0.784230] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00
- [ 0.800018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.800139] hub 2-0:1.0: USB hub found
- [ 0.800143] hub 2-0:1.0: 6 ports detected
- [ 0.800222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.800236] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.800251] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.800259] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.800262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.800312] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.800349] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
- [ 0.800481] hub 3-0:1.0: USB hub found
- [ 0.800485] hub 3-0:1.0: 2 ports detected
- [ 0.800553] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.800561] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.800564] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.800610] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.800645] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
- [ 0.800770] hub 4-0:1.0: USB hub found
- [ 0.800773] hub 4-0:1.0: 2 ports detected
- [ 0.800841] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.800851] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.800855] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.800899] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 0.800923] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
- [ 0.801051] hub 5-0:1.0: USB hub found
- [ 0.801054] hub 5-0:1.0: 2 ports detected
- [ 0.801121] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.801129] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.801132] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.801176] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 0.801212] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
- [ 0.801340] hub 6-0:1.0: USB hub found
- [ 0.801344] hub 6-0:1.0: 2 ports detected
- [ 0.801408] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.801416] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.801420] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.801468] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 0.801492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
- [ 0.801619] hub 7-0:1.0: USB hub found
- [ 0.801623] hub 7-0:1.0: 2 ports detected
- [ 0.801742] usbcore: registered new interface driver libusual
- [ 0.801785] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.836315] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.836321] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.836458] mousedev: PS/2 mouse device common for all mice
- [ 0.838577] rtc_cmos 00:07: RTC can wake from S4
- [ 0.838707] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
- [ 0.838738] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.838790] device-mapper: uevent: version 1.0.3
- [ 0.838871] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.838901] EISA: Probing bus 0 at eisa.0
- [ 0.838907] Cannot allocate resource for EISA slot 1
- [ 0.838909] Cannot allocate resource for EISA slot 2
- [ 0.838911] Cannot allocate resource for EISA slot 3
- [ 0.838912] Cannot allocate resource for EISA slot 4
- [ 0.838914] Cannot allocate resource for EISA slot 5
- [ 0.838916] Cannot allocate resource for EISA slot 6
- [ 0.838918] Cannot allocate resource for EISA slot 7
- [ 0.838920] Cannot allocate resource for EISA slot 8
- [ 0.838921] EISA: Detected 0 cards.
- [ 0.838932] cpufreq-nforce2: No nForce2 chipset.
- [ 0.838991] cpuidle: using governor ladder
- [ 0.839084] cpuidle: using governor menu
- [ 0.839086] EFI Variables Facility v0.08 2004-May-17
- [ 0.839333] TCP cubic registered
- [ 0.839450] NET: Registered protocol family 10
- [ 0.839980] NET: Registered protocol family 17
- [ 0.839985] Registering the dns_resolver key type
- [ 0.840017] Using IPI No-Shortcut mode
- [ 0.840195] PM: Hibernation image not present or could not be loaded.
- [ 0.840207] registered taskstats version 1
- [ 0.847146] Magic number: 13:235:95
- [ 0.847163] pci_express 0000:00:1c.2:pcie08: hash matches
- [ 0.847238] rtc_cmos 00:07: setting system clock to 2013-01-07 21:04:35 UTC (1357592675)
- [ 0.847723] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.847724] EDD information not available.
- [ 0.866494] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 0.948656] ata4.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33
- [ 0.988548] ata4.00: configured for UDMA/33
- [ 1.080237] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.080345] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.084233] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.084389] ata1.00: unexpected _GTF length (8)
- [ 1.092266] usb 1-2: new high-speed USB device number 2 using ehci_hcd
- [ 1.092341] ata1.00: ATA-8: SAMSUNG HM201JJ, 2AA00_00, max UDMA7
- [ 1.092347] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.120202] ata1.00: unexpected _GTF length (8)
- [ 1.144200] ata1.00: configured for UDMA/133
- [ 1.144405] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM201JJ 2AA0 PQ: 0 ANSI: 5
- [ 1.144534] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
- [ 1.144540] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.144578] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.144581] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.144603] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.146450] scsi 3:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5
- [ 1.151856] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.151861] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.152055] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.152166] sr 3:0:0:0: Attached scsi generic sg1 type 5
- [ 1.260067] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
- [ 1.260916] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.261032] Freeing unused kernel memory: 744k freed
- [ 1.261447] Write protecting the kernel text: 5828k
- [ 1.261479] Write protecting the kernel read-only data: 2380k
- [ 1.261480] NX-protecting the kernel data: 4412k
- [ 1.277724] udevd[96]: starting version 175
- [ 1.325961] wmi: Mapper loaded
- [ 1.331699] tg3.c:v3.121 (November 2, 2011)
- [ 1.331757] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.331776] tg3 0000:04:00.0: setting latency timer to 64
- [ 1.344728] sdhci: Secure Digital Host Controller Interface driver
- [ 1.344731] sdhci: Copyright(c) Pierre Ossman
- [ 1.345098] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
- [ 1.345114] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
- [ 1.346136] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 1.358907] mmc0: no vmmc regulator found
- [ 1.359931] Registered led device: mmc0::
- [ 1.368020] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
- [ 1.368055] firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.372055] acpi device:04: registered as cooling_device2
- [ 1.372125] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input4
- [ 1.372173] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 1.408018] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
- [ 1.432100] firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
- [ 1.468015] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
- [ 1.528016] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
- [ 1.529445] tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:d4:8b:87
- [ 1.529448] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 1.529452] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 1.529454] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 1.932385] firewire_core: created device fw0: GUID 00023f82cd403868, S400
- [ 49.450624] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 49.450626] vesafb: scrolling: redraw
- [ 49.450629] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 49.454013] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 3072k, total 3072k
- [ 49.454139] Console: switching to colour frame buffer device 128x48
- [ 49.454159] fb0: VESA VGA frame buffer device
- [ 50.048913] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 67.295855] Adding 1048572k swap on /dev/sda6. Priority:-1 extents:1 across:1048572k
- [ 67.302991] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 67.316348] udevd[431]: starting version 175
- [ 67.357031] lp: driver loaded but no devices found
- [ 67.431930] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 67.431934] Disabling lock debugging due to kernel taint
- [ 67.458444] cfg80211: Calling CRDA to update world regulatory domain
- [ 67.474231] ath5k 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 67.474245] ath5k 0000:0c:00.0: setting latency timer to 64
- [ 67.474290] ath5k 0000:0c:00.0: registered as 'phy0'
- [ 67.679791] r592 0000:0e:06.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
- [ 67.709764] r592: driver successfully loaded
- [ 67.763805] type=1400 audit(1357589142.409:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=588 comm="apparmor_parser"
- [ 67.764223] type=1400 audit(1357589142.413:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=588 comm="apparmor_parser"
- [ 67.764451] type=1400 audit(1357589142.413:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=588 comm="apparmor_parser"
- [ 67.781403] compal_laptop: Identified laptop model 'FL90/IFL90'
- [ 67.805824] compal_laptop: Driver 0.2.7 successfully loaded
- [ 67.838786] [fglrx] Maximum main memory to use for locked dma buffers: 3860 MBytes.
- [ 67.839322] [fglrx] vendor: 1002 device: 95c4 count: 1
- [ 67.853815] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
- [ 67.853829] pci 0000:01:00.0: power state changed by ACPI to D0
- [ 67.853833] pci 0000:01:00.0: power state changed by ACPI to D0
- [ 67.853843] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 67.853849] pci 0000:01:00.0: setting latency timer to 64
- [ 67.854223] [fglrx] Kernel PAT support is enabled
- [ 67.854240] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
- [ 67.976789] ath: EEPROM regdomain: 0x37
- [ 67.976791] ath: EEPROM indicates we should expect a direct regpair map
- [ 67.976794] ath: Country alpha2 being used: AW
- [ 67.976795] ath: Regpair used: 0x37
- [ 67.976799] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976802] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976804] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976807] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976809] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976812] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976814] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976816] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976819] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976821] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976823] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976826] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976828] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976833] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976835] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976838] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976840] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976842] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976847] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.976850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.976852] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 67.976854] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 67.976856] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 67.979189] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979193] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979195] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979198] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979200] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979203] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979205] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979207] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979210] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979212] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979214] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979217] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979219] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979222] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979224] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979229] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979231] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979233] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979238] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 67.979243] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979246] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
- [ 67.979248] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979250] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
- [ 67.979252] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.979255] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
- [ 67.981441] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981445] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981447] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981450] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981452] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981455] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981457] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981459] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981461] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981464] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981466] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981469] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981471] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981473] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981476] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981478] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981480] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981483] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981485] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981488] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981490] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981494] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981497] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 67.981499] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981502] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 67.981504] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.981507] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 67.981509] cfg80211: World regulatory domain updated:
- [ 67.981511] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 67.981514] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981517] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 67.981519] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 67.981522] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.981524] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 67.985878] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 67.986444] cfg80211: Calling CRDA for country: AW
- [ 67.986571] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
- [ 67.993957] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 67.994021] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
- [ 67.994053] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 67.995431] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995435] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995437] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995440] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995442] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995445] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995447] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995449] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995451] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995454] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995456] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995459] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995461] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995463] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995466] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995468] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995470] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995473] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995475] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995480] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995482] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995484] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995487] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995489] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 67.995492] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 67.995494] cfg80211: Disabling freq 2484 MHz
- [ 67.995497] cfg80211: Regulatory domain changed to country: AW
- [ 67.995499] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 67.995501] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 67.995503] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 67.995506] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 67.995508] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 68.009210] Linux video capture interface: v2.00
- [ 68.014187] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
- [ 68.016246] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input5
- [ 68.016586] usbcore: registered new interface driver uvcvideo
- [ 68.016588] USB Video Class driver (1.1.1)
- [ 68.056350] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 68.056431] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 68.056934] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 68.057007] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
- [ 68.057036] snd_hda_intel 0000:01:00.1: setting latency timer to 64
- [ 68.074127] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 68.074190] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
- [ 68.358258] psmouse serio1: elantech: assuming hardware version 1 (with firmware version 0x020004)
- [ 68.444322] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
- [ 68.964416] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 69.112266] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
- [ 69.432227] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- [ 69.614857] init: failsafe main process (865) killed by TERM signal
- [ 69.881253] Bluetooth: Core ver 2.16
- [ 69.881276] NET: Registered protocol family 31
- [ 69.881278] Bluetooth: HCI device and connection manager initialized
- [ 69.881281] Bluetooth: HCI socket layer initialized
- [ 69.881283] Bluetooth: L2CAP socket layer initialized
- [ 69.881548] Bluetooth: SCO socket layer initialized
- [ 69.883919] ppdev: user-space parallel port driver
- [ 69.902228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 69.902231] Bluetooth: BNEP filters: protocol multicast
- [ 69.907045] type=1400 audit(1357589144.553:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=977 comm="apparmor_parser"
- [ 69.908170] type=1400 audit(1357589144.557:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=977 comm="apparmor_parser"
- [ 69.922449] type=1400 audit(1357589144.569:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=975 comm="apparmor_parser"
- [ 69.922956] type=1400 audit(1357589144.569:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
- [ 69.923184] type=1400 audit(1357589144.569:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
- [ 69.926115] type=1400 audit(1357589144.573:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=982 comm="apparmor_parser"
- [ 69.926154] Bluetooth: RFCOMM TTY layer initialized
- [ 69.926159] Bluetooth: RFCOMM socket layer initialized
- [ 69.926161] Bluetooth: RFCOMM ver 1.11
- [ 69.926673] type=1400 audit(1357589144.573:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=982 comm="apparmor_parser"
- [ 69.995580] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
- [ 70.024425] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 70.024813] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 70.033878] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 70.034014] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 70.772692] fglrx_pci 0000:01:00.0: irq 51 for MSI/MSI-X
- [ 70.773754] [fglrx] Firegl kernel thread PID: 1127
- [ 70.773876] [fglrx] Firegl kernel thread PID: 1128
- [ 70.773994] [fglrx] Firegl kernel thread PID: 1129
- [ 70.774154] [fglrx] IRQ 51 Enabled
- [ 71.462613] [fglrx] Gart USWC size:1260 M.
- [ 71.462616] [fglrx] Gart cacheable size:498 M.
- [ 71.462620] [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 71.462623] [fglrx] Reserved FB block: Unshared offset:fc0a000, size:3f1000
- [ 71.462625] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
- [ 71.601616] postgres (1143): /proc/1143/oom_adj is deprecated, please use /proc/1143/oom_score_adj instead.
- [ 71.613569] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
- [ 71.613572] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
- [ 71.613711] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 72.222743] [fglrx:firegl_irq_enable] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
- [ 75.414626] vboxdrv: Found 2 processor cores.
- [ 75.414830] vboxdrv: fAsync=0 offMin=0x1c2 offMax=0xef1
- [ 75.414887] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 75.414889] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
- [ 75.428443] vboxpci: IOMMU not found (not registered)
- [ 76.064056] init: plymouth-stop pre-start process (1556) terminated with status 1
- [ 81.992228] eth0: no IPv6 routers present
- [ 97.025538] [fglrx:firegl_irq_enable] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
- [ 1329.321458] ACPI: EC: GPE storm detected, transactions will use polling mode
- [ 2183.445822] show_signal_msg: 15 callbacks suppressed
- [ 2183.445826] chromium-browse[3918]: segfault at 34 ip b40a6b37 sp bfbef850 error 4 in chromium-browser[b327b000+456a000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement