Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.12.25+ (pi@raspi2) (gcc version 4.8.3 20140106 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) ) #1 PREEMPT Sat Aug 2 18:11:04 CEST 2014
- [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: BCM2708
- [ 0.000000] cma: CMA: reserved 8 MiB at 1b800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 114688
- [ 0.000000] free_area_init_node: node 0, pgdat c0652130, node_mem_map c070a000
- [ 0.000000] Normal zone: 896 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 114688 pages, LIFO batch:31
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0x3ebd9976 smsc95xx.macaddr=B8:27:EB:BD:99:76 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=rotate:2 fbcon=font:ProFont6x11
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 439296K/458752K available (4583K kernel code, 263K rwdata, 1460K rodata, 146K init, 710K bss, 19456K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05ef044 (6045 kB)
- [ 0.000000] .init : 0xc05f0000 - 0xc0614bf4 ( 147 kB)
- [ 0.000000] .data : 0xc0616000 - 0xc0657c68 ( 264 kB)
- [ 0.000000] .bss : 0xc0657c74 - 0xc0709500 ( 711 kB)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:394
- [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001170] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.001225] pid_max: default: 32768 minimum: 301
- [ 0.001743] Mount-cache hash table entries: 512
- [ 0.002557] Initializing cgroup subsys memory
- [ 0.002666] Initializing cgroup subsys devices
- [ 0.002704] Initializing cgroup subsys freezer
- [ 0.002736] Initializing cgroup subsys blkio
- [ 0.002881] CPU: Testing write buffer coherency: ok
- [ 0.003337] Setting up static identity map for 0xc045dd18 - 0xc045dd74
- [ 0.006485] devtmpfs: initialized
- [ 0.022512] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [ 0.024078] NET: Registered protocol family 16
- [ 0.029496] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.030283] cpuidle: using governor ladder
- [ 0.030335] cpuidle: using governor menu
- [ 0.030852] bcm2708.uart_clock = 0
- [ 0.032573] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.032625] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.032659] mailbox: Broadcom VideoCore Mailbox driver
- [ 0.032754] bcm2708_vcio: mailbox at f200b880
- [ 0.032858] bcm_power: Broadcom power driver
- [ 0.032895] bcm_power_open() -> 0
- [ 0.032919] bcm_power_request(0, 8)
- [ 0.533641] bcm_mailbox_read -> 00000080, 0
- [ 0.533681] bcm_power_request -> 0
- [ 0.533938] Serial: AMBA PL011 UART driver
- [ 0.534102] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
- [ 0.898364] console [ttyAMA0] enabled
- [ 0.923728] bio: create slab <bio-0> at 0
- [ 0.929410] SCSI subsystem initialized
- [ 0.933378] usbcore: registered new interface driver usbfs
- [ 0.939072] usbcore: registered new interface driver hub
- [ 0.944637] usbcore: registered new device driver usb
- [ 0.951289] Switched to clocksource stc
- [ 0.955554] FS-Cache: Loaded
- [ 0.958714] CacheFiles: Loaded
- [ 0.974445] NET: Registered protocol family 2
- [ 0.979918] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.987326] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.993916] TCP: Hash tables configured (established 4096 bind 4096)
- [ 1.000361] TCP: reno registered
- [ 1.003658] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.009528] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.016287] NET: Registered protocol family 1
- [ 1.021212] RPC: Registered named UNIX socket transport module.
- [ 1.027272] RPC: Registered udp transport module.
- [ 1.032029] RPC: Registered tcp transport module.
- [ 1.036747] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.044182] bcm2708_dma: DMA manager at f2007000
- [ 1.048918] bcm2708_gpio: bcm2708_gpio_probe c0623f90
- [ 1.054460] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- [ 1.064072] audit: initializing netlink socket (disabled)
- [ 1.069572] type=2000 audit(0.910:1): initialized
- [ 1.244065] VFS: Disk quotas dquot_6.5.2
- [ 1.248349] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.257271] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.264230] NFS: Registering the id_resolver key type
- [ 1.269401] Key type id_resolver registered
- [ 1.273719] Key type id_legacy registered
- [ 1.278441] msgmni has been set to 874
- [ 1.284198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.292064] io scheduler noop registered
- [ 1.296019] io scheduler deadline registered (default)
- [ 1.301643] io scheduler cfq registered
- [ 1.306732] BCM2708FB: allocated DMA memory 5bc00000
- [ 1.311912] BCM2708FB: allocated DMA channel 0 @ f2007000
- [ 1.324650] Console: switching to colour frame buffer device 109x37
- [ 1.336180] uart-pl011 dev:f1: no DMA platform data
- [ 1.342876] kgdb: Registered I/O driver kgdboc.
- [ 1.349670] vc-cma: Videocore CMA driver
- [ 1.355315] vc-cma: vc_cma_base = 0x00000000
- [ 1.361657] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 1.368580] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 1.384664] brd: module loaded
- [ 1.394558] loop: module loaded
- [ 1.399567] vchiq: vchiq_init_state: slot_zero = 0xdb800000, is_master = 0
- [ 1.409147] Loading iSCSI transport class v2.0-870.
- [ 1.416807] CAN device driver interface
- [ 1.422686] usbcore: registered new interface driver smsc95xx
- [ 1.430060] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.637542] Core Release: 2.80a
- [ 1.642315] Setting default values for core params
- [ 1.648643] Finished setting default values for core params
- [ 1.855780] Using Buffer DMA mode
- [ 1.860591] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.867948] Multiprocessor Interrupt Enhancement - disabled
- [ 1.875052] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.880918] Dedicated Tx FIFOs mode
- [ 1.886323] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdbc14000 dma = 0x5bc14000 len=9024
- [ 1.899327] FIQ FSM acceleration enabled for :
- [ 1.899327] Non-periodic Split Transactions
- [ 1.899327] Periodic Split Transactions
- [ 1.899327] High-Speed Isochronous Endpoints
- [ 1.922214] dwc_otg: Microframe scheduler enabled
- [ 1.922310] WARN::hcd_init:473: FIQ at 0xc0331094
- [ 1.928569] WARN::hcd_init:474: FIQ ASM at 0xc0331344 length 36
- [ 1.936070] WARN::hcd_init:500: MPHI regs_base at 0xdc806000
- [ 1.943309] dwc_otg bcm2708_usb: DWC OTG Controller
- [ 1.949765] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- [ 1.958652] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- [ 1.965795] Init: Port Power? op_state=1
- [ 1.971349] Init: Power Port (0)
- [ 1.976418] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.984914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.993803] usb usb1: Product: DWC OTG Controller
- [ 2.000102] usb usb1: Manufacturer: Linux 3.12.25+ dwc_otg_hcd
- [ 2.007573] usb usb1: SerialNumber: bcm2708_usb
- [ 2.014565] hub 1-0:1.0: USB hub found
- [ 2.020030] hub 1-0:1.0: 1 port detected
- [ 2.026032] dwc_otg: FIQ enabled
- [ 2.026052] dwc_otg: NAK holdoff enabled
- [ 2.026063] dwc_otg: FIQ split-transaction FSM enabled
- [ 2.026082] Module dwc_common_port init
- [ 2.026541] usbcore: registered new interface driver usb-storage
- [ 2.034660] mousedev: PS/2 mouse device common for all mice
- [ 2.042628] bcm2835-cpufreq: min=700000 max=700000 cur=700000
- [ 2.050088] bcm2835-cpufreq: switching to governor powersave
- [ 2.057417] bcm2835-cpufreq: switching to governor powersave
- [ 2.064736] sdhci: Secure Digital Host Controller Interface driver
- [ 2.072492] sdhci: Copyright(c) Pierre Ossman
- [ 2.078469] sdhci: Enable low-latency mode
- [ 2.121537] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- [ 2.131053] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- [ 2.138656] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.147994] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.163094] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.170373] usbcore: registered new interface driver usbhid
- [ 2.179646] usbhid: USB HID core driver
- [ 2.189737] TCP: cubic registered
- [ 2.196764] Initializing XFRM netlink socket
- [ 2.202757] NET: Registered protocol family 17
- [ 2.211999] can: controller area network core (rev 20120528 abi 9)
- [ 2.221513] Indeed it is in host mode hprt0 = 00021501
- [ 2.232545] NET: Registered protocol family 29
- [ 2.238669] can: netlink gateway (rev 20130117) max_hops=1
- [ 2.261546] Key type dns_resolver registered
- [ 2.269056] registered taskstats version 1
- [ 2.283386] mmc0: read SD Status register (SSR) after 2 attempts
- [ 2.301977] Waiting for root device /dev/mmcblk0p2...
- [ 2.312283] mmc0: new high speed SDHC card at address e624
- [ 2.331614] mmcblk0: mmc0:e624 SU32G 29.7 GiB
- [ 2.342641] mmcblk0: p1 p2
- [ 2.471470] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 2.481258] Indeed it is in host mode hprt0 = 00001101
- [ 2.648375] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
- [ 2.655576] EXT4-fs (mmcblk0p2): recovery complete
- [ 2.687711] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.697825] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 2.705998] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
- [ 2.714874] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.724348] devtmpfs: mounted
- [ 2.729540] Freeing unused kernel memory: 144K (c05f0000 - c0614000)
- [ 2.738499] hub 1-1:1.0: USB hub found
- [ 2.744187] hub 1-1:1.0: 3 ports detected
- [ 3.031557] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 3.151840] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 3.160897] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.174010] smsc95xx v1.0.4
- [ 3.236014] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bd:99:76
- [ 3.331601] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
- [ 3.463290] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9041
- [ 3.479291] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.498872] usb 1-1.2: Product: 802.11n WLAN Adapter
- [ 3.514662] usb 1-1.2: Manufacturer: Realtek
- [ 3.520870] usb 1-1.2: SerialNumber: 00e04c000001
- [ 4.294336] udevd[156]: starting version 175
- [ 5.318148] bcm2708_spi bcm2708_spi.0: DMA channel 4 at address 0xf2007400 with irq 20
- [ 5.508374] bcm2708_spi bcm2708_spi.0: DMA channel 5 at address 0xf2007500 with irq 21
- [ 5.680866] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
- [ 5.833131] bcm2708_spi bcm2708_spi.0: SPI Controller running in dma mode
- [ 6.569513] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
- [ 7.783891] usbcore: registered new interface driver rtl8192cu
- [ 11.127482] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 11.621637] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 12.610193] fbtft_device: SPI devices registered:
- [ 12.620067] fbtft_device: spidev spi0.0 500kHz 8 bits mode=0x00
- [ 12.635483] fbtft_device: spidev spi0.1 500kHz 8 bits mode=0x00
- [ 12.651480] fbtft_device: 'fb' Platform devices registered:
- [ 12.658999] fbtft_device: bcm2708_fb id=-1 pdata? no
- [ 12.678662] fbtft_device: Deleting spi0.0
- [ 12.691282] flexfb spi0.0: fbtft_request_gpios: 'reset' = GPIO25
- [ 12.706730] flexfb spi0.0: fbtft_request_gpios: 'dc' = GPIO24
- [ 12.727144] flexfb spi0.0: fbtft_request_gpios: 'led' = GPIO22
- [ 12.741477] flexfb spi0.0: flexfb_verify_gpios_dc()
- [ 12.747902] flexfb spi0.0: fbtft_init_display()
- [ 12.756292] flexfb spi0.0: fbtft_reset()
- [ 12.881731] flexfb spi0.0: init: write(0xB0) 0x00
- [ 12.888085] flexfb spi0.0: init: write(0x11)
- [ 12.893898] flexfb spi0.0: init: mdelay(250)
- [ 13.164795] flexfb spi0.0: init: write(0x3A) 0x55
- [ 13.171093] flexfb spi0.0: init: write(0x36) 0x28
- [ 13.177312] flexfb spi0.0: init: write(0xC2) 0x44
- [ 13.183495] flexfb spi0.0: init: write(0xC5) 0x00 0x00 0x00 0x00
- [ 13.190968] flexfb spi0.0: init: write(0xE0) 0x0F 0x1F 0x1C 0x0C 0x0F 0x08 0x48 0x98 0x37 0x0A 0x13 0x04 0x11 0x0D 0x00
- [ 13.204667] flexfb spi0.0: init: write(0xE1) 0x0F 0x32 0x2E 0x0B 0x0D 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00
- [ 13.218475] flexfb spi0.0: init: write(0xE2) 0x0F 0x32 0x2E 0x0B 0x0D 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00
- [ 13.232423] flexfb spi0.0: init: write(0x11)
- [ 13.238324] flexfb spi0.0: init: write(0x29)
- [ 13.568192] flexfb spi0.0: Display update: 925 kB/s (323.907 ms), fps=0 (0.000 ms)
- [ 13.586459] flexfb spi0.0: fbtft_register_backlight()
- [ 13.757234] graphics fb1: flexfb frame buffer, 480x320, 300 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi0.0 at 8 MHz
- [ 13.772786] flexfb spi0.0: fbtft_backlight_update_status: polarity=1, power=0, fb_blank=0
- [ 13.784902] fbtft_device: GPIOS used by 'flexfb':
- [ 13.791856] fbtft_device: 'reset' = GPIO25
- [ 13.798159] fbtft_device: 'dc' = GPIO24
- [ 13.804226] fbtft_device: 'led' = GPIO22
- [ 13.810331] fbtft_device: SPI devices registered:
- [ 13.817097] fbtft_device: spidev spi0.1 500kHz 8 bits mode=0x00
- [ 13.825457] fbtft_device: flexfb spi0.0 8000kHz 8 bits mode=0x00
- [ 13.912380]
- [ 13.912380]
- [ 13.912380] ads7846_device: ads7846_device_init()
- [ 13.925879] ads7846_device: SPI devices registered:
- [ 13.932956] ads7846_device: spidev spi0.1 500kHz 8 bits mode=0x00
- [ 13.941497] ads7846_device: flexfb spi0.0 8000kHz 8 bits mode=0x00
- [ 13.950072] ads7846_device:
- [ 13.954995] ads7846_device: Settings:
- [ 13.965851] ads7846_device: model = 7846
- [ 13.977324] ads7846_device: gpio_pendown = 17
- [ 13.991184] ads7846_device: swap_xy = 1
- [ 13.997364] ads7846_device: x_min = 0
- [ 14.003065] ads7846_device: x_max = 4095
- [ 14.008877] ads7846_device: y_min = 0
- [ 14.014609] ads7846_device: y_max = 4095
- [ 14.020401] ads7846_device: x_plate_ohms = 100
- [ 14.026732] ads7846_device: pressure_min = 0
- [ 14.032828] ads7846_device: pressure_max = 255
- [ 14.038968] ads7846_device: keep_vref_on = 1
- [ 14.044907] ads7846_device: vref_delay_usecs = 0
- [ 14.051103] ads7846_device: vref_mv = 0
- [ 14.056506] ads7846_device: settle_delay_usecs = 0
- [ 14.063168] ads7846_device: penirq_recheck_delay_usecs = 0
- [ 14.070236] ads7846_device: y_plate_ohms = 0
- [ 14.076119] ads7846_device: debounce_max = 0
- [ 14.081984] ads7846_device: debounce_tol = 0
- [ 14.087759] ads7846_device: debounce_rep = 0
- [ 14.093582] ads7846_device: Deleting spi0.1
- [ 14.102042] ads7846_device: SPI devices registered:
- [ 14.117060] ads7846_device: flexfb spi0.0 8000kHz 8 bits mode=0x00
- [ 14.133862] ads7846_device: ads7846 spi0.1 2000kHz 8 bits mode=0x00
- [ 14.143667] ads7846_device:
- [ 14.161599] ads7846 spi0.1: touchscreen, irq 187
- [ 14.177258] input: ADS7846 Touchscreen as /devices/platform/bcm2708_spi.0/spi_master/spi0/spi0.1/input/input0
- [ 19.446604] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 22.836497] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 151.356321] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement