Pokemon GO SPOOFING Guide + Auto Routing. 100% NO BAN

Ok this will show you how exactly to setup an emulator on PC so you can either play Pokemon Go yourself from Home or Spoof Pokemon GO if you can't go outside in your town/area right now. I will show you exact steps on how to not only emulate pokemon go, but auto walk, and auto setup routes to pokestops/gyms, everything. Please read carefully. Anything that goes wrong for you is not my responsibility.

Requirements: 64 bit OS, Windows 7 and up

Step 1: Download & Install "Nox App Player" - http://en.bignox.com/

Step 2: The first thing we do is update Google Play Services inside Nox. This is important so everything works. It's also IMPORTANT to install the correct version. I've made this trivial for you. Click on Browser on the home page in Nox and paste this link: http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-9-2-56-release/google-play-services-9-2-56-070-124593566-android-apk-download/ then click download APK button. On the home screen click Downloads, then install the APK.

Step 3: Start up Nox. You will then see an Android like Home screen.

Step 4: Go to https://apkpure.com/pok%C3%A9mon-go/com.nianticlabs.pokemongo and download the Pokemon GO APK to your PC.

Step 5: In Nox, look for a button on the side with an Up arrow and APK, click it. Then Locate Pokemon GO on your PC and Click it to Install it into NOX. !!IMPORTANT!! When it is done installing, it will launch the App. QUICKLY at the bottom right click the button at the bottom right and swipe with your mouse to stop the app from running. We don't want to run it yet. (Nothing will majorly go wrong but its best to close it asap)

Step 6: Now we will root Nox. At the top right near the minimize button is the Settings button. Click it. In the middle will be Root Off. Turn Root to on. Click Save Changes, then click "Restart" to reboot Nox.

Step 8: Once Nox restarts, click the Browser app on the Home screen. Navigate to http://repo.xposed.info/module/de.robv.android.xposed.installer or google "Xposed Installer".  Scroll down on the page and click the link next to "Download" (Below Release Type and above Number of Downloads)

Step 9: On the home screen, click downloads, then click what you downloaded and Install the APK. Once installed on the home screen the app will appear "Xposed Installer" click it to open it.

Step 10: A menu with various options will appear. Click Framework. Click Install/Update button. Once installed, below the Install APK button you used earlier is "Reboot Android" button. Click this once to reboot Android. !!WARNING!! Only click reboot once, reboot will take longer than normal just wait it out (normally takes 1-2mins).

Step 11: Reopen Xposed Installer and click Downloads. At the top click the search magnifying glass then search for ""Mock Mock Locations" then click it. Scroll across to "Versions" then click Download on the latest version (1.4 as of this guide). Then Click Install.

Step 12: Once installed, click the back arrow at the top left until at the menu again and click "Modules". Mock Mock Locations will now be here, and an empty box. Click the empty box to Tick the box then !!IMPORTANT!! REBOOT ANDROID.

Step 13: Go back into Xposed Installer and into Modules. It will now be ticked and active. Click on Mock Mock Locations (the text). UNTICK THE BOX "All Apps" and then click "Add App". SCROLL down the list until you see Pokemon GO that you installed earlier, then click it to add it to the block list. !!IMPORTANT!! REBOOT ANDROID AGAIN WHEN YOU'VE DONE THIS. Now Pokemon Go will be prevented from checking if we have Mock Locations on, which we will now enable in the next step.

Step 14: On the Home screen click Settings at the bottom right. Scroll right down to "About Tablet" and click it. At the bottom you will see "Build Number", use your mouse and click it 6-8 times until it says "You are now a developer!" - this enables developer options.

Step 15: Go back, and just above About Tablet is now "Developer Options" - Click it. Scroll down until you see "Allow Mock Locations" Click the checkbox.

Step 16: Go back to settings, and click "Location". Click on Mode and make sure it is "Device only".

CONGRATULATIONS you've survived the hard part. Now I will show you how to make custom routes, import them, and use them for Pokemon GO!

Step 1: On the home screen, click Browser. Navigate to this link: https://apkpure.com/lockito-%E2%80%93-fake-gps-itinerary/fr.dvilleneuve.lockito and then click "Download APK (4.4MB)"

Step 2: On the Home Screen click Downloads then Install the Lockito APK you downloaded. Do not open it yet. We will use it later.

Step 3: Now is the time to plan a route you will make. It can be anywhere, your town, a city, central park new york, anywhere you want. VISIT this site to find locations of Pokestops and Gyms: https://www.pokegoworld.com/ - It is important to make a simple and small route that will link up with pokestops and gyms. SEE the step below on making a route.

Step 4: Go to this site: http://www.gpsies.com/ - Click register at the top right to make an account (YOU DONT NEED TO VERIFY EMAIL AND THEY MAKE YOU REGISTER TO MAKE A ROUTE, JUST DO IT ITS WORTH IT).

Step 5: On the home page, once registered and logged in, click "Create Tracks"

Step 6: THE FOLLOWING IS IMPORTANT READ CAREFULLY OR IT WON'T WORK. At the top left, set the speed (MPH) to 5.4 - then look for the menu on the right in the map screen. Click the Shoe icon BELOW the current Bike Icon, and then uncheck "Follow Roads" !!IMPORTANT!!

Step 7: Now is the fun part. Making a route. If you combine step 3 with this step, you can custom tailor a route for your area or anywhere you like that will tailor your needs. Click the screen to add a start point, then keep clicking to make the route. If you make a mistake click the "reset" button to try again. Once you have made a route and Set the speed !!IMPORTANT!! then click Save.

Step 8: Give the route a good name (just call it your town name "walk" or something. If you use bad names the site won't save the route). Then scroll down and click "Walking" !!IMPORTANT!! then click Save at the very bottom.

Step 9: You'll be taken to the completed route page. Scroll down and on the right find the "Download" option. Download the file to this location: C://Users/(YOUR PC NAME)/Nox_Share/Other and save it in here.

Step 10: Go into Nox and open Lockito. Click the 3 dots at the top right and click "Import". A bunch of folders will appear. Click the "mnt" folder then "shared" then "other". Your route should be here. Click it then click the Tick at the top right TWICE to import it.

Step 11: !!IMPORTANT!! At the top left, set the Speed from 50.0 km/h to "8.8km/h". Leave Accuracy as is. Then Click the Save disc at the top right to save the route.

YOU ARE DONE. Now here is the final process to get it running!

ALWAYS, ALWAYS ALWAYS ALWAYS, run Lockito first and open your route then click The Play button, then immediately pause, so then your location is ready.

DO NOT EVER OPEN POKEMON GO FIRST WITHOUT DOING THE ABOVE FIRST OTHERWISE IT WILL SKIP OVER THE OCEAN AND YOU'LL BE BANNED.

Once you have the route played but paused in Lockito, Open Pokemon GO, Login to your account (or make one), then the game should begin where your Lockito is paused. Simply Click Play in Lockito and go back into Pokemon GO. YOU ARE DONE, THE GAME IS NOW AUTO WALKING YOUR ROUTE.


If you got anything wrong or it is not working, please refollow all steps.