template6

public async void Template6()
        {
            Sections group6 = new Sections
            {
                desc = "Process Control"
            };
            Sections group61 = new Sections
            {
                desc = "Processes are documented and quality procedures have been developed and implemented within manufacturing operations."
            };
            Sections group611 = new Sections
            {
                desc = "Documented process and quality instruction procedures, including applicable standards, are located at work stations and reflect current practices."
            };
            Sections group612 = new Sections
            {
                desc = "Sampling plans are utilized as a part of the quality inspection plan."
            };
            Sections group613 = new Sections
            {
                desc = "Quality inspection sampling plans utilize acceptance criteria targeted at zero defects."
            };
            Sections group614 = new Sections
            {
                desc = "All instruction procedures are controlled documents and are signed off by appropriate personnel."
            };
            Sections group615 = new Sections
            {
                desc = "A formal procedure exists, which details the responsibility for procedure development and approval processes."
            };
            Sections group616 = new Sections
            {
                desc = "All written instruction procedures are routinely reviewed for application of processing methods and accuracy of quality requirements."
            };
            Sections group62 = new Sections
            {
                desc = "There are procedures for controlling manufacturing process changes."
            };
            Sections group621 = new Sections
            {
                desc = "Manufacturing process changes are documented on all key operations."
            };
            Sections group622 = new Sections
            {
                desc = "Process change procedure breaks responsibility down to affected department responsibility level."
            };
            Sections group623 = new Sections
            {
                desc = "Process F.M.E.A.'s (Failure Mode & Effects Analysis) are reviewed and updated for changes made to key operations."
            };
            Sections group624 = new Sections
            {
                desc = "Evaluation studies for quality specifications are required on process changes made to key operations."
            };
            Sections group625 = new Sections
            {
                desc = "All process changes are documented, reviewed, and approved by appropriate personnel before change is made."
            };
            Sections group626 = new Sections
            {
                desc = "All manufacturing process changes are promptly communicated to customer."
            };
            Sections group627 = new Sections
            {
                desc = "New processes are not implemented without customer knowledge and approval."
            };
            Sections group63 = new Sections
            {
                desc = "Control plans are developed which detail quality planning activities required to ensure conformance to quality requirements."
            };
            Sections group631 = new Sections
            {
                desc = "Supplier control plans satisfy customer driven quality requirements."
            };
            Sections group632 = new Sections
            {
                desc = "Control plans have been developed on all customer material."
            };
            Sections group633 = new Sections
            {
                desc = "Process instruction procedures agree with control plan."
            };
            Sections group634 = new Sections
            {
                desc = "Control plans are controlled documents."
            };
            Sections group635 = new Sections
            {
                desc = "Authority to stop the manufacturing process in the case of non-conforming product is defined."
            };
            Sections group636 = new Sections
            {
                desc = "Control plans are actively used throughout all operations and have been developed on 100% of key process operations."
            };
            Sections group637 = new Sections
            {
                desc = "Supplier utilizes control plan for quality planning activities on new and change processes."
            };
            Sections group638 = new Sections
            {
                desc = "Control plans are routinely reviewed for effectiveness and updated as required."
            };
            Sections group64 = new Sections
            {
                desc = "In-process quality expected to be achieved through superior process controls."
            };
            Sections group641 = new Sections
            {
                desc = "Consistently meets/exceeds quality goal."
            };
            Sections group642 = new Sections
            {
                desc = "Deficient processes are immediately identified and actions implemented for improvement."
            };
            Sections group643 = new Sections
            {
                desc = "Quality goals are regularly reviewed and supported by top management."
            };
            Sections group644 = new Sections
            {
                desc = "Annual quality goals are revised by top management."
            };
            Sections group645 = new Sections
            {
                desc = "SPC is used for in-process inspection."
            };
            Sections group65 = new Sections
            {
                desc = "Manufacturing quality systems achieved through Total Quality Control philosophies."
            };
            Sections group651 = new Sections
            {
                desc = "Uses SPC or other effective processes to control manufacturing processes."
            };
            Sections group652 = new Sections
            {
                desc = "Proactively implements effective quality and reliability programs."
            };
            Sections group653 = new Sections
            {
                desc = "Operates under total quality control principles, including validation."
            };
            Sections group654 = new Sections
            {
                desc = "All processes documented."
            };
            Sections group655 = new Sections
            {
                desc = "Supplier evaluates equipment for capability."
            };
            Sections group66 = new Sections
            {
                desc = "A preventive maintenance program has been documented and implemented."
            };
            Sections group661 = new Sections
            {
                desc = "Plant wide preventive maintenance program is in place and operational."
            };
            Sections group662 = new Sections
            {
                desc = "Preventive maintenance "procedures" are available which were supplied from the original equipment manufacturer or have been developed if not available."
            };
            Sections group663 = new Sections
            {
                desc = "Complete preventive maintenance and repair records are readily available for all process equipment."
            };
            Sections group664 = new Sections
            {
                desc = "Records indicate that high wear parts, for critical processes, are kept in stock."
            };
            Sections group665 = new Sections
            {
                desc = "Preventive maintenance program is reviewed on a routine basis and includes the effects of process changes."
            };
            Sections group666 = new Sections
            {
                desc = "Where necessary, preventive maintenance is concluded with a process capability study to verify conformance."
            };
            Sections group667 = new Sections
            {
                desc = "Preventive maintenance program is structured and performed based on time requirements."
            };

            group6.Add(group61);
            group6.Add(group62);
            group6.Add(group63);
            group6.Add(group64);
            group6.Add(group65);
            group6.Add(group66);
            group61.Add(group611);
            group61.Add(group612);
            group61.Add(group613);
            group61.Add(group614);
            group61.Add(group615);
            group61.Add(group616);
            group62.Add(group621);
            group62.Add(group622);
            group62.Add(group623);
            group62.Add(group624);
            group62.Add(group625);
            group62.Add(group626);
            group62.Add(group627);
            group63.Add(group631);
            group63.Add(group632);
            group63.Add(group633);
            group63.Add(group634);
            group63.Add(group635);
            group63.Add(group636);
            group63.Add(group637);
            group63.Add(group638);
            group64.Add(group641);
            group64.Add(group642);
            group64.Add(group643);
            group64.Add(group644);
            group64.Add(group645);
            group65.Add(group651);
            group65.Add(group652);
            group65.Add(group653);
            group65.Add(group654);
            group65.Add(group655);
            group66.Add(group661);
            group66.Add(group662);
            group66.Add(group663);
            group66.Add(group664);
            group66.Add(group665);
            group66.Add(group666);
            group66.Add(group667);

            await connection.InsertWithChildrenAsync(group6, recursive: true);
        }