Sat Aug  9 18:06:28 2014 : Info: Cleaning up request 24 ID 2 with timestamp +827
Sat Aug  9 18:06:28 2014 : Info: Ready to process requests.
rad_recv: Access-Request packet from host 192.168.87.2 port 53280, id=2, length=123
        User-Name = "adrian"
        NAS-IP-Address = 192.168.87.2
        Called-Station-Id = "e03f4903e748"
        Calling-Station-Id = "00c2c6367f27"
        NAS-Identifier = "e03f4903e748"
        NAS-Port = 46
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0200000a01627269616e
        Message-Authenticator = 0xcf1f9115dca686858446df79d7166267
Sat Aug  9 18:06:45 2014 : Info: # Executing section authorize from file /opt/etc/freeradius2/sites/default
Sat Aug  9 18:06:45 2014 : Info: +group authorize {
Sat Aug  9 18:06:45 2014 : Info: [eap] EAP packet type response id 0 length 10
Sat Aug  9 18:06:45 2014 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Sat Aug  9 18:06:45 2014 : Info: ++[eap] = updated
Sat Aug  9 18:06:45 2014 : Info: +} # group authorize = updated
Sat Aug  9 18:06:45 2014 : Info: Found Auth-Type = EAP
Sat Aug  9 18:06:45 2014 : Info: # Executing group from file /opt/etc/freeradius2/sites/default
Sat Aug  9 18:06:45 2014 : Info: +group authenticate {
Sat Aug  9 18:06:45 2014 : Info: [eap] EAP Identity
Sat Aug  9 18:06:45 2014 : Info: [eap] processing type tls
Sat Aug  9 18:06:45 2014 : Info: [tls] Initiate
Sat Aug  9 18:06:45 2014 : Info: [tls] Start returned 1
Sat Aug  9 18:06:45 2014 : Info: ++[eap] = handled
Sat Aug  9 18:06:45 2014 : Info: +} # group authenticate = handled
Sending Access-Challenge of id 2 to 192.168.87.2 port 53280
        EAP-Message = 0x010100061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf3574974f3565c0e9ea846087a9effc2
Sat Aug  9 18:06:45 2014 : Info: Finished request 25.
Sat Aug  9 18:06:45 2014 : Debug: Going to the next request
Sat Aug  9 18:06:45 2014 : Debug: Waking up in 6.9 seconds.
rad_recv: Access-Request packet from host 192.168.87.2 port 53280, id=2, length=240
Sat Aug  9 18:06:45 2014 : Info: Cleaning up request 25 ID 2 with timestamp +856
        User-Name = "adrian"
        NAS-IP-Address = 192.168.87.2
        Called-Station-Id = "e03f4903e748"
        Calling-Station-Id = "00c2c6367f27"
        NAS-Identifier = "e03f4903e748"
        NAS-Port = 46
        Framed-MTU = 1400
        State = 0xf3574974f3565c0e9ea846087a9effc2
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0201006d158000000063160301005e0100005a030153e69b773bffe27422131b04a58c4bedacd25c7ddec21bc1b13bcb0481e9cf3b000018c014c0130035002fc00ac00900380032000a00130005000401000019ff01000100000a0006000400170018000b0002010000230000
        Message-Authenticator = 0x7baa19787daef25291a040f02a9b2973
Sat Aug  9 18:06:45 2014 : Info: # Executing section authorize from file /opt/etc/freeradius2/sites/default
Sat Aug  9 18:06:45 2014 : Info: +group authorize {
Sat Aug  9 18:06:45 2014 : Info: [eap] EAP packet type response id 1 length 109
Sat Aug  9 18:06:45 2014 : Info: [eap] Continuing tunnel setup.
Sat Aug  9 18:06:45 2014 : Info: ++[eap] = ok
Sat Aug  9 18:06:45 2014 : Info: +} # group authorize = ok
Sat Aug  9 18:06:45 2014 : Info: Found Auth-Type = EAP
Sat Aug  9 18:06:45 2014 : Info: # Executing group from file /opt/etc/freeradius2/sites/default
Sat Aug  9 18:06:45 2014 : Info: +group authenticate {
Sat Aug  9 18:06:45 2014 : Info: [eap] Request found, released from the list
Sat Aug  9 18:06:45 2014 : Info: [eap] EAP/ttls
Sat Aug  9 18:06:45 2014 : Info: [eap] processing type ttls
Sat Aug  9 18:06:45 2014 : Info: [ttls] Authenticate
Sat Aug  9 18:06:45 2014 : Info: [ttls] processing EAP-TLS
Sat Aug  9 18:06:45 2014 : Debug:   TLS Length 99
Sat Aug  9 18:06:45 2014 : Info: [ttls] Length Included
Sat Aug  9 18:06:45 2014 : Info: [ttls] eaptls_verify returned 11
Sat Aug  9 18:06:45 2014 : Info: [ttls]     (other): before/accept initialization
Sat Aug  9 18:06:45 2014 : Info: [ttls]     TLS_accept: before/accept initialization
Sat Aug  9 18:06:45 2014 : Info: [ttls] <<< TLS 1.0 Handshake [length 005e], ClientHello
Sat Aug  9 18:06:45 2014 : Info: [ttls] >>> TLS 1.0 Alert [length 0002], fatal handshake_failure
Sat Aug  9 18:06:45 2014 : Error: TLS Alert write:fatal:handshake failure
Sat Aug  9 18:06:45 2014 : Error:     TLS_accept: error in SSLv3 read client hello C
Sat Aug  9 18:06:45 2014 : Error: rlm_eap: SSL error error:1408A0C1:lib(20):func(138):reason(193)
Sat Aug  9 18:06:45 2014 : Error: SSL: SSL_read failed in a system call (-1), TLS session fails.
Sat Aug  9 18:06:45 2014 : Debug: TLS receive handshake failed during operation
Sat Aug  9 18:06:45 2014 : Info: [ttls] eaptls_process returned 4
Sat Aug  9 18:06:45 2014 : Info: [eap] Handler failed in EAP/ttls
Sat Aug  9 18:06:45 2014 : Info: [eap] Failed in EAP select
Sat Aug  9 18:06:45 2014 : Info: ++[eap] = invalid
Sat Aug  9 18:06:45 2014 : Info: +} # group authenticate = invalid
Sat Aug  9 18:06:45 2014 : Info: Failed to authenticate the user.
Sat Aug  9 18:06:45 2014 : Info: Delaying reject of request 26 for 5 seconds
Sat Aug  9 18:06:45 2014 : Debug: Going to the next request
Sat Aug  9 18:06:45 2014 : Debug: Waking up in 0.9 seconds.
Sat Aug  9 18:06:46 2014 : Debug: Waking up in 3.9 seconds.
Sat Aug  9 18:06:50 2014 : Info: Sending delayed reject for request 26
Sending Access-Reject of id 2 to 192.168.87.2 port 53280
        EAP-Message = 0x04010004
        Message-Authenticator = 0x00000000000000000000000000000000
Sat Aug  9 18:06:50 2014 : Debug: Waking up in 6.9 seconds.
Sat Aug  9 18:06:57 2014 : Info: Cleaning up request 26 ID 2 with timestamp +856
Sat Aug  9 18:06:57 2014 : Info: Ready to process requests.