Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # smartctl -a /dev/sda
- smartctl 5.43 2012-06-20 r3567 [x86_64-linux-3.7.1-gentoo] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Intel 520 Series SSDs
- Device Model: INTEL SSDSC2CW120A3
- Serial Number: CVCV153605KU120BGN
- LU WWN Device Id: 5 001517 bb27d704f
- Firmware Version: 400i
- User Capacity: 120 034 123 776 bytes [120 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ACS-2 revision 3
- Local Time is: Tue Mar 12 13:01:44 2013 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 2097) seconds.
- Offline data collection
- capabilities: (0x7f) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Abort Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 48) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x0021) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
- 9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 903335h+38m+08.520s
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 200
- 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
- 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
- 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
- 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 200
- 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
- 187 Uncorrectable_Error_Cnt 0x000f 100 100 050 Pre-fail Always - 3025011
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 200
- 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 24017
- 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535
- 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 70
- 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535
- 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
- 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
- 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 24017
- 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 56799
- 249 NAND_Writes_1GiB 0x0013 100 100 000 Pre-fail Always - 1058
- SMART Error Log not supported
- SMART Self-test Log not supported
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
