API tools faq
paste
Advertisement
Guest User

MESA 5i25-7i77 error message

a guest
Nov 12th, 2013
219
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.68 KB | None | 0 0
raw download clone embed print report
  1. [ 0.640748] usb usb1: configuration #1 chosen from 1 choice
  2. [ 0.640774] hub 1-0:1.0: USB hub found
  3. [ 0.640781] hub 1-0:1.0: 4 ports detected
  4. [ 0.640831] alloc irq_desc for 20 on node -1
  5. [ 0.640833] alloc kstat_irqs on node -1
  6. [ 0.640837] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  7. [ 0.640846] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  8. [ 0.640849] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  9. [ 0.640876] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  10. [ 0.640897] ehci_hcd 0000:00:1d.7: debug port 1
  11. [ 0.644789] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  12. [ 0.644800] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf3026400
  13. [ 0.660567] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  14. [ 0.660655] usb usb2: configuration #1 chosen from 1 choice
  15. [ 0.660687] hub 2-0:1.0: USB hub found
  16. [ 0.660694] hub 2-0:1.0: 6 ports detected
  17. [ 0.660751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  18. [ 0.660773] uhci_hcd: USB Universal Host Controller Interface driver
  19. [ 0.660792] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  20. [ 0.660797] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  21. [ 0.660800] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  22. [ 0.660827] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  23. [ 0.660847] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
  24. [ 0.660922] usb usb3: configuration #1 chosen from 1 choice
  25. [ 0.660944] hub 3-0:1.0: USB hub found
  26. [ 0.660951] hub 3-0:1.0: 2 ports detected
  27. [ 0.660990] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  28. [ 0.660995] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  29. [ 0.660998] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  30. [ 0.661024] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  31. [ 0.661051] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
  32. [ 0.661127] usb usb4: configuration #1 chosen from 1 choice
  33. [ 0.661150] hub 4-0:1.0: USB hub found
  34. [ 0.661156] hub 4-0:1.0: 2 ports detected
  35. [ 0.661196] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  36. [ 0.661201] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  37. [ 0.661204] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  38. [ 0.661236] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  39. [ 0.661256] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
  40. [ 0.661329] usb usb5: configuration #1 chosen from 1 choice
  41. [ 0.661353] hub 5-0:1.0: USB hub found
  42. [ 0.661359] hub 5-0:1.0: 2 ports detected
  43. [ 0.661395] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  44. [ 0.661400] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  45. [ 0.661403] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  46. [ 0.661428] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  47. [ 0.661448] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
  48. [ 0.661527] usb usb6: configuration #1 chosen from 1 choice
  49. [ 0.661551] hub 6-0:1.0: USB hub found
  50. [ 0.661557] hub 6-0:1.0: 2 ports detected
  51. [ 0.661594] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  52. [ 0.661599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  53. [ 0.661602] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  54. [ 0.661628] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  55. [ 0.661648] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0
  56. [ 0.661726] usb usb7: configuration #1 chosen from 1 choice
  57. [ 0.661749] hub 7-0:1.0: USB hub found
  58. [ 0.661755] hub 7-0:1.0: 2 ports detected
  59. [ 0.661844] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
  60. [ 0.664647] serio: i8042 KBD port at 0x60,0x64 irq 1
  61. [ 0.664653] serio: i8042 AUX port at 0x60,0x64 irq 12
  62. [ 0.664762] mice: PS/2 mouse device common for all mice
  63. [ 0.664866] rtc_cmos 00:03: RTC can wake from S4
  64. [ 0.664902] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  65. [ 0.664922] rtc0: alarms up to one month, y3k, 114 bytes nvram
  66. [ 0.665011] device-mapper: uevent: version 1.0.3
  67. [ 0.665093] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  68. [ 0.665152] device-mapper: multipath: version 1.1.0 loaded
  69. [ 0.665154] device-mapper: multipath round-robin: version 1.0.0 loaded
  70. [ 0.665245] EISA: Probing bus 0 at eisa.0
  71. [ 0.665250] Cannot allocate resource for EISA slot 1
  72. [ 0.665254] Cannot allocate resource for EISA slot 3
  73. [ 0.665257] Cannot allocate resource for EISA slot 4
  74. [ 0.665269] EISA: Detected 0 cards.
  75. [ 0.665272] cpuidle: using governor ladder
  76. [ 0.665274] cpuidle: using governor menu
  77. [ 0.665641] TCP cubic registered
  78. [ 0.665778] NET: Registered protocol family 10
  79. [ 0.666167] lo: Disabled Privacy Extensions
  80. [ 0.666442] NET: Registered protocol family 17
  81. [ 0.666463] Using IPI No-Shortcut mode
  82. [ 0.666536] registered taskstats version 1
  83. [ 0.666894] rtc_cmos 00:03: setting system clock to 2013-11-12 09:24:34 UTC (1384248274)
  84. [ 0.666897] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  85. [ 0.666899] EDD information not available.
  86. [ 0.881306] ata2.00: link resume succeeded after 1 retries
  87. [ 0.959942] ata3: SATA link down (SStatus 0 SControl 300)
  88. [ 0.959961] usb 1-4: new high speed USB device using ehci_hcd and address 2
  89. [ 1.049741] ata4: link resume succeeded after 1 retries
  90. [ 1.090704] usb 1-4: configuration #1 chosen from 1 choice
  91. [ 1.168504] ata4: SATA link down (SStatus 0 SControl 300)
  92. [ 1.264068] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  93. [ 1.264079] ata1.01: SATA link down (SStatus 0 SControl 300)
  94. [ 1.272201] ata1.00: ATA-8: WDC WD2500AAJS-60Z0A0, 03.03E03, max UDMA/100
  95. [ 1.272204] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  96. [ 1.288228] ata1.00: configured for UDMA/100
  97. [ 1.288329] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAJS-6 03.0 PQ: 0 ANSI: 5
  98. [ 1.288434] sd 0:0:0:0: Attached scsi generic sg0 type 0
  99. [ 1.288437] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  100. [ 1.288486] sd 0:0:0:0: [sda] Write Protect is off
  101. [ 1.288489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  102. [ 1.288514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  103. [ 1.288646] sda: sda1 sda2 < sda5 >
  104. [ 1.325886] sd 0:0:0:0: [sda] Attached SCSI disk
  105. [ 1.468064] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
  106. [ 1.468076] ata2.01: SATA link down (SStatus 0 SControl 300)
  107. [ 1.468086] ata2.01: link offline, clearing class 3 to NONE
  108. [ 1.476197] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, HB02, max UDMA/100
  109. [ 1.480023] usb 2-6: new high speed USB device using ehci_hcd and address 5
  110. [ 1.492234] ata2.00: configured for UDMA/100
  111. [ 1.493347] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N HB02 PQ: 0 ANSI: 5
  112. [ 1.497427] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  113. [ 1.497430] Uniform CD-ROM driver Revision: 3.20
  114. [ 1.497506] sr 1:0:0:0: Attached scsi CD-ROM sr0
  115. [ 1.497549] sr 1:0:0:0: Attached scsi generic sg1 type 5
  116. [ 1.497603] Freeing unused kernel memory: 620k freed
  117. [ 1.497863] Write protecting the kernel text: 4540k
  118. [ 1.497892] Write protecting the kernel read-only data: 1668k
  119. [ 1.513857] udev: starting version 151
  120. [ 1.591176] Linux agpgart interface v0.103
  121. [ 1.613681] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
  122. [ 1.613684] e1000e: Copyright (c) 1999-2008 Intel Corporation.
  123. [ 1.613715] alloc irq_desc for 19 on node -1
  124. [ 1.613718] alloc kstat_irqs on node -1
  125. [ 1.613725] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  126. [ 1.613735] e1000e 0000:00:19.0: setting latency timer to 64
  127. [ 1.613811] alloc irq_desc for 27 on node -1
  128. [ 1.613813] alloc kstat_irqs on node -1
  129. [ 1.613822] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
  130. [ 1.620118] Initializing USB Mass Storage driver...
  131. [ 1.620212] scsi4 : SCSI emulation for USB Mass Storage devices
  132. [ 1.620286] usbcore: registered new interface driver usb-storage
  133. [ 1.620289] USB Mass Storage support registered.
  134. [ 1.620377] usb-storage: device found at 2
  135. [ 1.620379] usb-storage: waiting for device to settle before scanning
  136. [ 1.638464] FDC 0 is a post-1991 82077
  137. [ 1.706761] [drm] Initialized drm 1.1.0 20060810
  138. [ 1.730245] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  139. [ 1.730251] nouveau 0000:01:00.0: setting latency timer to 64
  140. [ 1.731367] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
  141. [ 1.731524] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086200a2)
  142. [ 1.731880] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
  143. [ 1.779062] [drm] nouveau 0000:01:00.0: ... appears to be valid
  144. [ 1.779066] [drm] nouveau 0000:01:00.0: BIT BIOS found
  145. [ 1.779069] [drm] nouveau 0000:01:00.0: Bios version 60.86.41.00
  146. [ 1.779072] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
  147. [ 1.779074] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
  148. [ 1.779076] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
  149. [ 1.779079] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
  150. [ 1.779082] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
  151. [ 1.779084] [drm] nouveau 0000:01:00.0: 1: 0x00000110: type 0x10 idx 1 tag 0xff
  152. [ 1.779087] [drm] nouveau 0000:01:00.0: 2: 0x00000111: type 0x11 idx 1 tag 0xff
  153. [ 1.779090] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
  154. [ 1.779092] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
  155. [ 1.779095] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 010213f1 07a0c030
  156. [ 1.779097] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
  157. [ 1.779103] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBEC5
  158. [ 1.824145] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC205
  159. [ 1.846485] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0f:fe:eb:c7:2e
  160. [ 1.846488] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
  161. [ 1.846511] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1062ff-0ff
  162. [ 1.856019] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCE46
  163. [ 1.856027] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCF38
  164. [ 1.864090] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD132
  165. [ 1.864093] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD197
  166. [ 1.888096] [drm] nouveau 0000:01:00.0: 0xD197: Condition still not met after 20ms, skipping following opcodes
  167. [ 1.888103] [drm] nouveau 0000:01:00.0: 0xB152: parsing output script 0
  168. [ 1.888106] [drm] nouveau 0000:01:00.0: 0xA7C8: parsing output script 0
  169. [ 1.959560] [TTM] Zone kernel: Available graphics memory: 437098 kiB.
  170. [ 1.959562] [TTM] Zone highmem: Available graphics memory: 1012940 kiB.
  171. [ 1.959570] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
  172. [ 1.973906] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
  173. [ 1.974943] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
  174. [ 1.978055] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
  175. [ 1.978529] [drm] nouveau 0000:01:00.0: Detected a DAC output
  176. [ 1.978532] [drm] nouveau 0000:01:00.0: Detected a TMDS output
  177. [ 1.978535] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
  178. [ 1.978538] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
  179. [ 2.106963] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo f6967e00
  180. [ 2.107012] fb0: nouveaufb frame buffer device
  181. [ 2.107014] registered panic notifier
  182. [ 2.107018] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
  183. [ 2.108450] vga16fb: initializing
  184. [ 2.108453] vga16fb: mapped to 0xc00a0000
  185. [ 2.108456] vga16fb: not registering due to another framebuffer present
  186. [ 2.114138] [drm] nouveau 0000:01:00.0: 0xB156: parsing output script 1
  187. [ 2.114158] [drm] nouveau 0000:01:00.0: 0x82DB: parsing clock script 0
  188. [ 2.114698] Console: switching to colour frame buffer device 180x56
  189. [ 2.152946] usb 2-6: configuration #1 chosen from 1 choice
  190. [ 2.383665] xor: automatically using best checksumming function: pIII_sse
  191. [ 2.399994] pIII_sse : 8734.000 MB/sec
  192. [ 2.400003] xor: using function: pIII_sse (8734.000 MB/sec)
  193. [ 2.402137] device-mapper: dm-raid45: initialized v0.2594b
  194. [ 2.404039] usb 5-1: new low speed USB device using uhci_hcd and address 2
  195. [ 2.579548] usb 5-1: configuration #1 chosen from 1 choice
  196. [ 2.590944] usbcore: registered new interface driver hiddev
  197. [ 2.603671] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
  198. [ 2.603753] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
  199. [ 2.603770] usbcore: registered new interface driver usbhid
  200. [ 2.603772] usbhid: v2.6:USB HID core driver
  201. [ 2.660998] EXT4-fs (sda1): mounted filesystem with ordered data mode
  202. [ 2.820034] usb 5-2: new full speed USB device using uhci_hcd and address 3
  203. [ 3.031595] usb 5-2: configuration #1 chosen from 1 choice
  204. [ 3.044746] input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
  205. [ 3.044804] generic-usb 0003:03F0:1024.0002: input,hidraw1: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1d.0-2/input0
  206. [ 3.288035] usb 7-1: new full speed USB device using uhci_hcd and address 2
  207. [ 3.484047] usb 7-1: configuration #1 chosen from 1 choice
  208. [ 3.498010] input: Elo TouchSystems Elo TouchSystems Surface Capacitive 5020 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input5
  209. [ 3.498091] generic-usb 0003:04E7:0042.0003: input,hidraw2: USB HID v1.11 Pointer [Elo TouchSystems Elo TouchSystems Surface Capacitive 5020] on usb-0000:00:1d.2-1/input0
  210. [ 6.620814] usb-storage: device scan complete
  211. [ 6.621301] scsi 4:0:0:0: Direct-Access SanDisk 1.26 PQ: 0 ANSI: 5
  212. [ 6.621705] sd 4:0:0:0: Attached scsi generic sg2 type 0
  213. [ 6.622294] sd 4:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
  214. [ 6.624040] sd 4:0:0:0: [sdb] Write Protect is off
  215. [ 6.624044] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
  216. [ 6.624046] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  217. [ 6.627165] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  218. [ 6.627169] sdb: sdb1
  219. [ 6.629415] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  220. [ 6.629418] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  221. [ 8.787798] udev: starting version 151
  222. [ 8.789757] Adding 5932024k swap on /dev/sda5. Priority:-1 extents:1 across:5932024k
  223. [ 8.807085] lp: driver loaded but no devices found
  224. [ 9.000105] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
  225. [ 9.000144] tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
  226. [ 9.017791] parport_pc 00:07: reported by Plug and Play ACPI
  227. [ 9.017845] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
  228. [ 9.026668] Linux video capture interface: v2.00
  229. [ 9.029840] uvcvideo: Found UVC 1.00 device Video Camera (045e:0294)
  230. [ 9.043253] ppdev: user-space parallel port driver
  231. [ 9.049256] type=1505 audit(1384248282.881:2): operation="profile_load" pid=679 name="/sbin/dhclient3"
  232. [ 9.049969] type=1505 audit(1384248282.881:3): operation="profile_load" pid=679 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  233. [ 9.050340] type=1505 audit(1384248282.881:4): operation="profile_load" pid=679 name="/usr/lib/connman/scripts/dhclient-script"
  234. [ 9.061357] type=1505 audit(1384248282.893:5): operation="profile_replace" pid=705 name="/sbin/dhclient3"
  235. [ 9.061990] type=1505 audit(1384248282.893:6): operation="profile_replace" pid=705 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  236. [ 9.062338] type=1505 audit(1384248282.893:7): operation="profile_replace" pid=705 name="/usr/lib/connman/scripts/dhclient-script"
  237. [ 9.112183] lp0: using parport0 (interrupt-driven).
  238. [ 9.158394] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  239. [ 9.158432] HDA Intel 0000:00:1b.0: setting latency timer to 64
  240. [ 9.263596] type=1505 audit(1384248283.093:8): operation="profile_load" pid=902 name="/usr/share/gdm/guest-session/Xsession"
  241. [ 9.265735] type=1505 audit(1384248283.097:9): operation="profile_replace" pid=903 name="/sbin/dhclient3"
  242. [ 9.266366] type=1505 audit(1384248283.097:10): operation="profile_replace" pid=903 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  243. [ 9.266907] type=1505 audit(1384248283.097:11): operation="profile_replace" pid=903 name="/usr/lib/connman/scripts/dhclient-script"
  244. [ 9.391385] usbcore: registered new interface driver uvcvideo
  245. [ 9.391390] USB Video Class driver (v0.1.0)
  246. [ 9.638881] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
  247. [ 9.644476] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
  248. [ 9.730794] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
  249. [ 9.731026] ADDRCONF(NETDEV_UP): eth0: link is not ready
  250. [ 9.735657] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
  251. [ 9.746317] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
  252. [ 9.970628] CPU0 attaching NULL sched-domain.
  253. [ 9.970634] CPU1 attaching NULL sched-domain.
  254. [ 9.992094] CPU0 attaching sched-domain:
  255. [ 9.992098] domain 0: span 0-1 level MC
  256. [ 9.992100] groups: 0 1
  257. [ 9.992106] CPU1 attaching sched-domain:
  258. [ 9.992108] domain 0: span 0-1 level MC
  259. [ 9.992111] groups: 1 0
  260. [ 10.268761] input: PC Speaker as /devices/platform/pcspkr/input/input7
  261. [ 11.032854] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
  262. [ 11.032858] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
  263. [ 11.033039] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  264. [ 11.766741] CPU0 attaching NULL sched-domain.
  265. [ 11.766747] CPU1 attaching NULL sched-domain.
  266. [ 11.788568] CPU0 attaching sched-domain:
  267. [ 11.788572] domain 0: span 0-1 level MC
  268. [ 11.788575] groups: 0 1
  269. [ 11.788581] CPU1 attaching sched-domain:
  270. [ 11.788583] domain 0: span 0-1 level MC
  271. [ 11.788586] groups: 1 0
  272. [ 2278.504583] I-pipe: Domain RTAI registered.
  273. [ 2278.504589] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  274. [ 2278.504591] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  275. [ 2278.504619] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  276. [ 2278.504621] PIPELINE layers:
  277. [ 2278.504623] fddf5e20 9ac15d93 RTAI 200
  278. [ 2278.504626] c085cb20 0 Linux 100
  279. [ 2278.521917] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  280. [ 2278.522018] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  281. [ 2278.522022] RTAI[sched]: hard timer type/freq = APIC/20781191(Hz); default timing: periodic; linear timed lists.
  282. [ 2278.522026] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2327285000 hz.
  283. [ 2278.522028] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns.
  284. [ 2278.522084] RTAI[usi]: enabled.
  285. [ 2278.563803] RTAI[math]: loaded.
  286. [ 2278.656008] hm2: loading Mesa HostMot2 driver version 0.15
  287. [ 2278.658268] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  288. [ 2278.658302] hm2_pci 0000:07:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  289. [ 2278.658305] hm2_pci: discovered 5i25 at 0000:07:04.0
  290. [ 2278.658940] hm2/hm2_5i25.0: Smart Serial Firmware Version 38
  291. [ 2278.767704] hm2/hm2_5i25.0: 34 I/O Pins used:
  292. [ 2278.767706] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort
  293. [ 2278.767709] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort
  294. [ 2278.767711] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort
  295. [ 2278.767713] hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort
  296. [ 2278.767716] hm2/hm2_5i25.0: IO Pin 004 (P3-03): IOPort
  297. [ 2278.767719] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output)
  298. [ 2278.767722] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input)
  299. [ 2278.767725] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  300. [ 2278.767728] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input)
  301. [ 2278.767730] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input)
  302. [ 2278.767733] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input)
  303. [ 2278.767736] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input)
  304. [ 2278.767739] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input)
  305. [ 2278.767742] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input)
  306. [ 2278.767744] hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort
  307. [ 2278.767746] hm2/hm2_5i25.0: IO Pin 015 (P3-12): IOPort
  308. [ 2278.767748] hm2/hm2_5i25.0: IO Pin 016 (P3-13): IOPort
  309. [ 2278.767751] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort
  310. [ 2278.767753] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort
  311. [ 2278.767755] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort
  312. [ 2278.767757] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort
  313. [ 2278.767759] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort
  314. [ 2278.767761] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort
  315. [ 2278.767763] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort
  316. [ 2278.767766] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort
  317. [ 2278.767768] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort
  318. [ 2278.767770] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort
  319. [ 2278.767772] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort
  320. [ 2278.767774] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort
  321. [ 2278.767776] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort
  322. [ 2278.767778] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort
  323. [ 2278.767781] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort
  324. [ 2278.767783] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort
  325. [ 2278.767785] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort
  326. [ 2278.767832] hm2/hm2_5i25.0: registered
  327. [ 2278.767834] hm2_5i25.0: initialized AnyIO board at 0000:07:04.0
  328. [ 2279.081045] hm2_5i25.0: dropping AnyIO board at 0000:07:04.0
  329. [ 2279.081050] hm2/hm2_5i25.0: unregistered
  330. [ 2279.081068] hm2_pci 0000:07:04.0: PCI INT A disabled
  331. [ 2279.081087] hm2_pci: driver unloaded
  332. [ 2279.082770] hm2: unloading
  333. [ 2279.132318] RTAI[math]: unloaded.
  334. [ 2279.151054] SCHED releases registered named ALIEN RTGLBH
  335. [ 2279.180278] RTAI[malloc]: unloaded.
  336. [ 2279.280171] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  337. [ 2279.282136] I-pipe: Domain RTAI unregistered.
  338. [ 2279.282166] RTAI[hal]: unmounted.
  339. [ 2359.942731] I-pipe: Domain RTAI registered.
  340. [ 2359.942737] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  341. [ 2359.942739] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  342. [ 2359.942767] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  343. [ 2359.942769] PIPELINE layers:
  344. [ 2359.942771] fe815e20 9ac15d93 RTAI 200
  345. [ 2359.942774] c085cb20 0 Linux 100
  346. [ 2359.958886] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  347. [ 2359.958981] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  348. [ 2359.958986] RTAI[sched]: hard timer type/freq = APIC/20781191(Hz); default timing: periodic; linear timed lists.
  349. [ 2359.958990] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2327285000 hz.
  350. [ 2359.958992] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns.
  351. [ 2359.959051] RTAI[usi]: enabled.
  352. [ 2359.989513] RTAI[math]: loaded.
  353. [ 2366.064245] hm2: loading Mesa HostMot2 driver version 0.15
  354. [ 2375.821969] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  355. [ 2375.822002] hm2_pci 0000:07:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  356. [ 2375.822005] hm2_pci: discovered 5i25 at 0000:07:04.0
  357. [ 2375.822042] hm2: no firmware specified in config modparam! the board had better have firmware configured already, or this won't work
  358. [ 2375.823378] hm2/hm2_5i25.0: Smart Serial Firmware Version 38
  359. [ 2375.931957] hm2/hm2_5i25.0: 34 I/O Pins used:
  360. [ 2375.931961] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort
  361. [ 2375.931963] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort
  362. [ 2375.931965] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort
  363. [ 2375.931968] hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort
  364. [ 2375.931970] hm2/hm2_5i25.0: IO Pin 004 (P3-03): IOPort
  365. [ 2375.931973] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output)
  366. [ 2375.931976] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input)
  367. [ 2375.931979] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  368. [ 2375.931982] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input)
  369. [ 2375.931985] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input)
  370. [ 2375.931987] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input)
  371. [ 2375.931990] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input)
  372. [ 2375.932008] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input)
  373. [ 2375.932011] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input)
  374. [ 2375.932014] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input)
  375. [ 2375.932016] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input)
  376. [ 2375.932019] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input)
  377. [ 2375.932022] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort
  378. [ 2375.932024] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort
  379. [ 2375.932026] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort
  380. [ 2375.932028] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort
  381. [ 2375.932031] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort
  382. [ 2375.932033] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort
  383. [ 2375.932035] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort
  384. [ 2375.932038] hm2/hm2_5i25.0: IO Pin 024 (P2-17): Muxed Encoder Select #6, pin Mux Select 0 (Output)
  385. [ 2375.932041] hm2/hm2_5i25.0: IO Pin 025 (P2-05): Muxed Encoder #3, pin Muxed A (Input)
  386. [ 2375.932043] hm2/hm2_5i25.0: IO Pin 026 (P2-06): Muxed Encoder #3, pin Muxed B (Input)
  387. [ 2375.932046] hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder #3, pin Muxed Index (Input)
  388. [ 2375.932049] hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #4, pin Muxed A (Input)
  389. [ 2375.932052] hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #4, pin Muxed B (Input)
  390. [ 2375.932055] hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #4, pin Muxed Index (Input)
  391. [ 2375.932057] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #5, pin Muxed A (Input)
  392. [ 2375.932060] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #5, pin Muxed B (Input)
  393. [ 2375.932063] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #5, pin Muxed Index (Input)
  394. [ 2375.932116] hm2/hm2_5i25.0: registered
  395. [ 2375.932119] hm2_5i25.0: initialized AnyIO board at 0000:07:04.0
  396. [ 2420.342178] hm2_5i25.0: dropping AnyIO board at 0000:07:04.0
  397. [ 2420.342183] hm2/hm2_5i25.0: unregistered
  398. [ 2420.342206] hm2_pci 0000:07:04.0: PCI INT A disabled
  399. [ 2420.342232] hm2_pci: driver unloaded
  400. [ 2420.344142] hm2: unloading
  401. [ 2420.365313] RTAI[math]: unloaded.
  402. [ 2420.394376] SCHED releases registered named ALIEN RTGLBH
  403. [ 2420.428230] RTAI[malloc]: unloaded.
  404. [ 2420.524044] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  405. [ 2420.526003] I-pipe: Domain RTAI unregistered.
  406. [ 2420.526033] RTAI[hal]: unmounted.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!