API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Dec 29th, 2010
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.37 KB | None | 0 0
raw download clone embed print report
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
  4. BIOS-provided physical RAM map:
  5. BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  6. BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  7. BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  8. BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
  9. BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
  10. BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
  11. BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
  12. BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  13. Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
  14. DMI 2.3 present.
  15. AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  16. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  17. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
  18. e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  19. last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
  20. MTRR default type: uncachable
  21. MTRR fixed ranges enabled:
  22. 00000-9FFFF write-back
  23. A0000-DFFFF uncachable
  24. E0000-EFFFF write-through
  25. F0000-FFFFF write-protect
  26. MTRR variable ranges enabled:
  27. 0 base 000000000 mask FC0000000 write-back
  28. 1 disabled
  29. 2 disabled
  30. 3 disabled
  31. 4 disabled
  32. 5 disabled
  33. 6 disabled
  34. 7 disabled
  35. PAT not supported by CPU.
  36. Scanning 0 areas for low memory corruption
  37. modified physical RAM map:
  38. modified: 0000000000000000 - 0000000000010000 (reserved)
  39. modified: 0000000000010000 - 000000000009fc00 (usable)
  40. modified: 000000000009fc00 - 00000000000a0000 (reserved)
  41. modified: 00000000000e0000 - 0000000000100000 (reserved)
  42. modified: 0000000000100000 - 000000003ffd0000 (usable)
  43. modified: 000000003ffd0000 - 000000003ffde000 (ACPI data)
  44. modified: 000000003ffde000 - 0000000040000000 (ACPI NVS)
  45. modified: 00000000fed13000 - 00000000fed1a000 (reserved)
  46. modified: 00000000fff80000 - 0000000100000000 (reserved)
  47. initial memory mapped : 0 - 01800000
  48. found SMP MP-table at [c00ff780] ff780
  49. init_memory_mapping: 0000000000000000-00000000377fe000
  50. 0000000000 - 0000400000 page 4k
  51. 0000400000 - 0037400000 page 2M
  52. 0037400000 - 00377fe000 page 4k
  53. kernel direct mapping tables up to 377fe000 @ 15000-1a000
  54. RAMDISK: 3fe5f000 - 3ffc0000
  55. Allocated new RAMDISK: 00100000 - 00260e7d
  56. Move RAMDISK from 000000003fe5f000 - 000000003ffbfe7c to 00100000 - 00260e7c
  57. ACPI: RSDP 000f8110 00014 (v00 ACPIAM)
  58. ACPI: RSDT 3ffd0000 00038 (v01 A M I OEMRSDT 10000505 MSFT 00000097)
  59. ACPI: FACP 3ffd0200 00084 (v02 A M I OEMFACP 10000505 MSFT 00000097)
  60. ACPI: DSDT 3ffd0430 04A43 (v01 UW____ F18_____ 00000001 INTL 02002026)
  61. ACPI: FACS 3ffde000 00040
  62. ACPI: APIC 3ffd0390 00054 (v01 A M I OEMAPIC 10000505 MSFT 00000097)
  63. ACPI: MCFG 3ffd03f0 0003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
  64. ACPI: OEMB 3ffde040 00046 (v01 A M I AMI_OEM 10000505 MSFT 00000097)
  65. ACPI: MCFG 3ffd4e80 0003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
  66. ACPI: Local APIC address 0xfee00000
  67. 135MB HIGHMEM available.
  68. 887MB LOWMEM available.
  69. mapped low ram: 0 - 377fe000
  70. low ram: 0 - 377fe000
  71. Zone PFN ranges:
  72. DMA 0x00000010 -> 0x00001000
  73. Normal 0x00001000 -> 0x000377fe
  74. HighMem 0x000377fe -> 0x0003ffd0
  75. Movable zone start PFN for each node
  76. early_node_map[2] active PFN ranges
  77. 0: 0x00000010 -> 0x0000009f
  78. 0: 0x00000100 -> 0x0003ffd0
  79. On node 0 totalpages: 261983
  80. free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598200
  81. DMA zone: 32 pages used for memmap
  82. DMA zone: 0 pages reserved
  83. DMA zone: 3951 pages, LIFO batch:0
  84. Normal zone: 1744 pages used for memmap
  85. Normal zone: 221486 pages, LIFO batch:31
  86. HighMem zone: 272 pages used for memmap
  87. HighMem zone: 34498 pages, LIFO batch:7
  88. Using APIC driver default
  89. ACPI: PM-Timer IO Port: 0x808
  90. ACPI: Local APIC address 0xfee00000
  91. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  92. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  93. IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  94. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  95. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  96. ACPI: IRQ0 used by override.
  97. ACPI: IRQ2 used by override.
  98. ACPI: IRQ9 used by override.
  99. Using ACPI (MADT) for SMP configuration information
  100. SMP: Allowing 1 CPUs, 0 hotplug CPUs
  101. nr_irqs_gsi: 40
  102. early_res array is doubled to 64 at [16000 - 167ff]
  103. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  104. PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  105. PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  106. Allocating PCI resources starting at 40000000 (gap: 40000000:bed13000)
  107. Booting paravirtualized kernel on bare hardware
  108. setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
  109. PERCPU: Embedded 13 pages/cpu @c2000000 s31488 r0 d21760 u4194304
  110. pcpu-alloc: s31488 r0 d21760 u4194304 alloc=1*4194304
  111. pcpu-alloc: [0] 0
  112. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935
  113. Kernel command line: root=/dev/disk/by-uuid/11f3c59d-dbc2-4797-b2c0-75eceb2080db ro
  114. PID hash table entries: 4096 (order: 2, 16384 bytes)
  115. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  116. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  117. Enabling fast FPU save and restore... done.
  118. Enabling unmasked SIMD FPU exception support... done.
  119. Initializing CPU#0
  120. allocated 5241600 bytes of page_cgroup
  121. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  122. Subtract (45 early reservations)
  123. #1 [0000001000 - 0000002000] EX TRAMPOLINE
  124. #2 [0001000000 - 000158fe8c] TEXT DATA BSS
  125. #3 [0001590000 - 00015960d1] BRK
  126. #4 [00000ff790 - 0000100000] BIOS reserved
  127. #5 [00000ff780 - 00000ff790] MP-table mpf
  128. #6 [000009f400 - 00000fb700] BIOS reserved
  129. #7 [00000fb850 - 00000ff780] BIOS reserved
  130. #8 [00000fb700 - 00000fb850] MP-table mpc
  131. #9 [0000010000 - 0000011000] TRAMPOLINE
  132. #10 [0000011000 - 0000015000] ACPI WAKEUP
  133. #11 [0000015000 - 0000016000] PGTABLE
  134. #12 [0000100000 - 0000261000] NEW RAMDISK
  135. #13 [0001597000 - 0001598000] BOOTMEM
  136. #14 [0001598000 - 0001d98000] BOOTMEM
  137. #15 [000158fec0 - 000158fec4] BOOTMEM
  138. #16 [000158ff00 - 000158ffc0] BOOTMEM
  139. #17 [0001596100 - 0001596154] BOOTMEM
  140. #18 [0001d98000 - 0001d9b000] BOOTMEM
  141. #19 [000158ffc0 - 000158ffd0] BOOTMEM
  142. #20 [0001596180 - 0001596d80] BOOTMEM
  143. #21 [0001596d80 - 0001596da7] BOOTMEM
  144. #22 [0001596dc0 - 0001596ebc] BOOTMEM
  145. #23 [0001596ec0 - 0001596f00] BOOTMEM
  146. #24 [0001596f00 - 0001596f40] BOOTMEM
  147. #25 [0001596f40 - 0001596f80] BOOTMEM
  148. #26 [0001596f80 - 0001596fc0] BOOTMEM
  149. #27 [0001596fc0 - 0001597000] BOOTMEM
  150. #28 [0001d9b000 - 0001d9b040] BOOTMEM
  151. #29 [0001d9b040 - 0001d9b080] BOOTMEM
  152. #30 [0001d9b080 - 0001d9b0c0] BOOTMEM
  153. #31 [0001d9b0c0 - 0001d9b0d0] BOOTMEM
  154. #32 [0001d9b100 - 0001d9b13f] BOOTMEM
  155. #33 [0001d9b140 - 0001d9b17f] BOOTMEM
  156. #34 [0002000000 - 000200d000] BOOTMEM
  157. #35 [0001d9d180 - 0001d9d184] BOOTMEM
  158. #36 [0001d9d1c0 - 0001d9d1c4] BOOTMEM
  159. #37 [0001d9d200 - 0001d9d204] BOOTMEM
  160. #38 [0001d9d240 - 0001d9d244] BOOTMEM
  161. #39 [0001d9d280 - 0001d9d330] BOOTMEM
  162. #40 [0001d9d340 - 0001d9d3e8] BOOTMEM
  163. #41 [0001d9d400 - 0001da1400] BOOTMEM
  164. #42 [0001da1400 - 0001e21400] BOOTMEM
  165. #43 [0001e21400 - 0001e61400] BOOTMEM
  166. #44 [000200d000 - 000250cb00] BOOTMEM
  167. Initializing HighMem for node 0 (000377fe:0003ffd0)
  168. Memory: 1026600k/1048384k available (3104k kernel code, 21332k reserved, 1205k data, 428k init, 139080k highmem)
  169. virtual kernel memory layout:
  170. fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
  171. pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  172. vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  173. lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  174. .init : 0xc1436000 - 0xc14a1000 ( 428 kB)
  175. .data : 0xc1308056 - 0xc1435820 (1205 kB)
  176. .text : 0xc1000000 - 0xc1308056 (3104 kB)
  177. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  178. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  179. Hierarchical RCU implementation.
  180. RCU-based detection of stalled CPUs is disabled.
  181. Verbose stalled-CPUs detection is disabled.
  182. NR_IRQS:512
  183. Console: colour VGA+ 80x25
  184. console [tty0] enabled
  185. Fast TSC calibration using PIT
  186. Detected 800.072 MHz processor.
  187. Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.81 BogoMIPS (lpj=2666906)
  188. pid_max: default: 32768 minimum: 301
  189. Security Framework initialized
  190. TOMOYO Linux initialized
  191. AppArmor: AppArmor disabled by boot time parameter
  192. Mount-cache hash table entries: 512
  193. Initializing cgroup subsys ns
  194. Initializing cgroup subsys cpuacct
  195. Initializing cgroup subsys memory
  196. Initializing cgroup subsys devices
  197. Initializing cgroup subsys freezer
  198. Initializing cgroup subsys net_cls
  199. Initializing cgroup subsys blkio
  200. mce: CPU supports 5 MCE banks
  201. CPU0: Thermal monitoring enabled (TM2)
  202. Performance Events: p6 PMU driver.
  203. ... version: 0
  204. ... bit width: 32
  205. ... generic registers: 2
  206. ... value mask: 00000000ffffffff
  207. ... max period: 000000007fffffff
  208. ... fixed-purpose events: 0
  209. ... event mask: 0000000000000003
  210. SMP alternatives: switching to UP code
  211. Freeing SMP alternatives: 16k freed
  212. ACPI: Core revision 20100702
  213. Enabling APIC mode: Flat. Using 1 I/O APICs
  214. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  215. CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
  216. NMI watchdog enabled, takes one hw-pmu counter.
  217. Brought up 1 CPUs
  218. Total of 1 processors activated (1600.81 BogoMIPS).
  219. devtmpfs: initialized
  220. NET: Registered protocol family 16
  221. ACPI: bus type pci registered
  222. PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  223. PCI: not using MMCONFIG
  224. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
  225. PCI: Using configuration type 1 for base access
  226. bio: create slab <bio-0> at 0
  227. ACPI: EC: Look up EC in DSDT
  228. ACPI: Executed 1 blocks of module-level executable AML code
  229. ACPI: Interpreter enabled
  230. ACPI: (supports S0 S4 S5)
  231. ACPI: Using IOAPIC for interrupt routing
  232. PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  233. PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  234. PCI: Using MMCONFIG for extended config space
  235. ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
  236. ACPI: No dock devices found.
  237. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  238. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  239. pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  240. pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
  241. pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  242. pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
  243. pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
  244. pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  245. pci 0000:00:01.0: PME# disabled
  246. pci 0000:00:1b.0: reg 10: [mem 0xfebf8000-0xfebfbfff 64bit]
  247. pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  248. pci 0000:00:1b.0: PME# disabled
  249. pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  250. pci 0000:00:1c.0: PME# disabled
  251. pci 0000:00:1d.0: reg 20: [io 0xe480-0xe49f]
  252. pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f]
  253. pci 0000:00:1d.2: reg 20: [io 0xe880-0xe89f]
  254. pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f]
  255. pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
  256. pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  257. pci 0000:00:1d.7: PME# disabled
  258. pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
  259. pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
  260. pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
  261. pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
  262. pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
  263. pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
  264. pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
  265. pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
  266. pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
  267. pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
  268. pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
  269. pci 0000:03:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
  270. pci 0000:03:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
  271. pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
  272. pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  273. pci 0000:00:01.0: PCI bridge to [bus 03-03]
  274. pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
  275. pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
  276. pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
  277. pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  278. pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
  279. pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
  280. pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
  281. pci 0000:01:03.0: reg 10: [mem 0xfa9fe000-0xfa9fefff]
  282. pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
  283. pci 0000:01:03.0: PME# disabled
  284. pci 0000:01:04.0: reg 10: [mem 0xfa9ff000-0xfa9ff7ff]
  285. pci 0000:01:04.0: reg 14: [mem 0xfa9f8000-0xfa9fbfff]
  286. pci 0000:01:04.0: supports D1 D2
  287. pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot
  288. pci 0000:01:04.0: PME# disabled
  289. pci 0000:01:05.0: reg 10: [io 0xc800-0xc8ff]
  290. pci 0000:01:05.0: reg 14: [mem 0xfa9ffc00-0xfa9ffcff]
  291. pci 0000:01:05.0: reg 30: [mem 0xfa9c0000-0xfa9dffff pref]
  292. pci 0000:01:05.0: supports D1 D2
  293. pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
  294. pci 0000:01:05.0: PME# disabled
  295. pci 0000:01:07.0: reg 10: [io 0xdc00-0xdc0f]
  296. pci 0000:01:07.0: reg 14: [io 0xd880-0xd88f]
  297. pci 0000:01:07.0: reg 18: [io 0xd800-0xd80f]
  298. pci 0000:01:07.0: reg 1c: [io 0xd480-0xd48f]
  299. pci 0000:01:07.0: reg 20: [io 0xd400-0xd41f]
  300. pci 0000:01:07.0: reg 24: [io 0xd000-0xd0ff]
  301. pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
  302. pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
  303. pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
  304. pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  305. pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  306. pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  307. pci_bus 0000:00: on NUMA node 0
  308. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  309. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  310. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
  311. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  312. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  313. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  314. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
  315. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  316. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  317. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  318. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  319. HEST: Table is not found!
  320. vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
  321. vgaarb: loaded
  322. PCI: Using ACPI for IRQ routing
  323. PCI: pci_cache_line_size set to 64 bytes
  324. pci 0000:00:1e.0: address space collision: [io 0xc000-0xdfff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  325. pci 0000:01:07.0: address space collision: [io 0xdc00-0xdc0f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  326. pci 0000:01:07.0: address space collision: [io 0xd880-0xd88f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  327. pci 0000:01:07.0: address space collision: [io 0xd800-0xd80f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  328. pci 0000:01:07.0: address space collision: [io 0xd480-0xd48f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  329. pci 0000:01:07.0: address space collision: [io 0xd400-0xd41f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  330. pci 0000:01:07.0: address space collision: [io 0xd000-0xd0ff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
  331. reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  332. reserve RAM buffer: 000000003ffd0000 - 000000003fffffff
  333. NetLabel: Initializing
  334. NetLabel: domain hash size = 128
  335. NetLabel: protocols = UNLABELED CIPSOv4
  336. NetLabel: unlabeled traffic allowed by default
  337. hpet clockevent registered
  338. HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  339. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  340. hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  341. Switching to clocksource tsc
  342. pnp: PnP ACPI init
  343. ACPI: bus type pnp registered
  344. pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:01:07.0 BAR 4 [io 0x0000-0x001f]
  345. pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  346. pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  347. pnp 00:08: disabling [io 0x0044-0x004d] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  348. pnp 00:08: disabling [io 0x0050-0x005f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  349. pnp 00:08: disabling [io 0x0063] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  350. pnp 00:08: disabling [io 0x0065] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  351. pnp 00:08: disabling [io 0x0067-0x006f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  352. pnp 00:08: disabling [io 0x0072-0x007f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  353. pnp 00:08: disabling [io 0x0080] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  354. pnp 00:08: disabling [io 0x0084-0x0086] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  355. pnp 00:08: disabling [io 0x0088] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  356. pnp 00:08: disabling [io 0x008c-0x008e] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  357. pnp 00:08: disabling [io 0x0090-0x009f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  358. pnp 00:08: disabling [io 0x00a2-0x00bf] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  359. pnp 00:08: disabling [io 0x00e0-0x00ef] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
  360. pnp: PnP ACPI: found 12 devices
  361. ACPI: ACPI bus type pnp unregistered
  362. system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
  363. system 00:08: [io 0x04d0-0x04d1] has been reserved
  364. system 00:08: [io 0x0800-0x087f] has been reserved
  365. system 00:08: [io 0x0480-0x04bf] has been reserved
  366. system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
  367. system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
  368. system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
  369. system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
  370. system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
  371. system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
  372. system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  373. system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  374. system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
  375. system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  376. system 00:0b: [mem 0x00100000-0x3fffffff] could not be reserved
  377. pci 0000:00:1e.0: BAR 13: assigned [io 0x1000-0x1fff]
  378. pci 0000:00:01.0: PCI bridge to [bus 03-03]
  379. pci 0000:00:01.0: bridge window [io disabled]
  380. pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
  381. pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
  382. pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  383. pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
  384. pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
  385. pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
  386. pci 0000:01:07.0: BAR 5: assigned [io 0x1000-0x10ff]
  387. pci 0000:01:07.0: BAR 5: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff]
  388. pci 0000:01:07.0: BAR 4: assigned [io 0x1400-0x141f]
  389. pci 0000:01:07.0: BAR 4: set to [io 0x1400-0x141f] (PCI address [0x1400-0x141f]
  390. pci 0000:01:07.0: BAR 0: assigned [io 0x1420-0x142f]
  391. pci 0000:01:07.0: BAR 0: set to [io 0x1420-0x142f] (PCI address [0x1420-0x142f]
  392. pci 0000:01:07.0: BAR 1: assigned [io 0x1430-0x143f]
  393. pci 0000:01:07.0: BAR 1: set to [io 0x1430-0x143f] (PCI address [0x1430-0x143f]
  394. pci 0000:01:07.0: BAR 2: assigned [io 0x1440-0x144f]
  395. pci 0000:01:07.0: BAR 2: set to [io 0x1440-0x144f] (PCI address [0x1440-0x144f]
  396. pci 0000:01:07.0: BAR 3: assigned [io 0x1450-0x145f]
  397. pci 0000:01:07.0: BAR 3: set to [io 0x1450-0x145f] (PCI address [0x1450-0x145f]
  398. pci 0000:00:1e.0: PCI bridge to [bus 01-01]
  399. pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
  400. pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
  401. pci 0000:00:1e.0: bridge window [mem pref disabled]
  402. pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  403. pci 0000:00:01.0: setting latency timer to 64
  404. pci 0000:00:1c.0: enabling device (0106 -> 0107)
  405. pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  406. pci 0000:00:1c.0: setting latency timer to 64
  407. pci 0000:00:1e.0: setting latency timer to 64
  408. pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  409. pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
  410. pci_bus 0000:03: resource 1 [mem 0xfaa00000-0xfeafffff]
  411. pci_bus 0000:03: resource 2 [mem 0xbfe00000-0xdfefffff pref]
  412. pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
  413. pci_bus 0000:02: resource 1 [mem 0xbfc00000-0xbfcfffff]
  414. pci_bus 0000:02: resource 2 [mem 0xbfd00000-0xbfdfffff 64bit pref]
  415. pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
  416. pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfa9fffff]
  417. pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
  418. pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
  419. NET: Registered protocol family 2
  420. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  421. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  422. TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  423. TCP: Hash tables configured (established 131072 bind 65536)
  424. TCP reno registered
  425. UDP hash table entries: 512 (order: 2, 16384 bytes)
  426. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  427. NET: Registered protocol family 1
  428. pci 0000:03:00.0: Boot video device
  429. PCI: CLS 32 bytes, default 64
  430. Unpacking initramfs...
  431. Freeing initrd memory: 1412k freed
  432. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  433. apm: overridden by ACPI.
  434. Scanning for low memory corruption every 60 seconds
  435. audit: initializing netlink socket (disabled)
  436. type=2000 audit(1293633632.386:1): initialized
  437. highmem bounce pool size: 64 pages
  438. HugeTLB registered 4 MB page size, pre-allocated 0 pages
  439. VFS: Disk quotas dquot_6.5.2
  440. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  441. msgmni has been set to 1736
  442. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  443. io scheduler noop registered
  444. io scheduler deadline registered
  445. io scheduler cfq registered (default)
  446. ERST: Table is not found!
  447. isapnp: Scanning for PnP cards...
  448. isapnp: No Plug & Play device found
  449. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  450. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  451. i8042.c: Detected active multiplexing controller, rev 1.0.
  452. serio: i8042 KBD port at 0x60,0x64 irq 1
  453. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  454. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  455. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  456. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  457. mice: PS/2 mouse device common for all mice
  458. rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  459. rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
  460. cpuidle: using governor ladder
  461. cpuidle: using governor menu
  462. TCP cubic registered
  463. NET: Registered protocol family 17
  464. Registering the dns_resolver key type
  465. Using IPI No-Shortcut mode
  466. PM: Resume from disk failed.
  467. registered taskstats version 1
  468. rtc_cmos 00:03: setting system clock to 2010-12-29 14:40:33 UTC (1293633633)
  469. Initalizing network drop monitor service
  470. Freeing unused kernel memory: 428k freed
  471. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  472. udev[33]: starting version 164
  473. SCSI subsystem initialized
  474. libata version 3.00 loaded.
  475. sata_via 0000:01:07.0: version 2.6
  476. sata_via 0000:01:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  477. sata_via 0000:01:07.0: routed to hard irq line 10
  478. scsi0 : sata_via
  479. ata_piix 0000:00:1f.1: version 2.13
  480. ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  481. ata_piix 0000:00:1f.1: setting latency timer to 64
  482. scsi2 : ata_piix
  483. scsi1 : sata_via
  484. scsi3 : ata_piix
  485. ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  486. ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  487. scsi4 : sata_via
  488. ata1: SATA max UDMA/133 port i16@0x1420 bmdma 0x1400 irq 16
  489. ata2: SATA max UDMA/133 port i16@0x1430 bmdma 0x1408 irq 16
  490. ata3: PATA max UDMA/133 port i16@0x1440 bmdma 0x1410 irq 16
  491. ata4.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
  492. ata4.00: configured for UDMA/33
  493. scsi 2:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
  494. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  495. ata1.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7
  496. ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  497. ata1.00: configured for UDMA/133
  498. scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0 ANSI: 5
  499. ata2: SATA link down (SStatus 0 SControl 310)
  500. sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  501. sd 0:0:0:0: [sda] Write Protect is off
  502. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  503. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  504. sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  505. cdrom: Uniform CD-ROM driver Revision: 3.20
  506. sr 2:0:0:0: Attached scsi CD-ROM sr0
  507. sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
  508. sd 0:0:0:0: [sda] Attached SCSI disk
  509. EXT3-fs: barriers not enabled
  510. EXT3-fs (sda1): mounted filesystem with writeback data mode
  511. kjournald starting. Commit interval 5 seconds
  512. Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
  513. udev[669]: starting version 164
  514. ACPI: acpi_idle registered with cpuidle
  515. Marking TSC unstable due to TSC halts in idle
  516. Switching to clocksource hpet
  517. input: PC Speaker as /devices/platform/pcspkr/input/input1
  518. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  519. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  520. intel_rng: FWH not detected
  521. iTCO_vendor_support: vendor-support=0
  522. Linux agpgart interface v0.103
  523. input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
  524. ACPI: Lid Switch [LID]
  525. input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
  526. ACPI: Sleep Button [SLPB]
  527. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
  528. ACPI: Power Button [PWRB]
  529. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
  530. ACPI: Power Button [PWRF]
  531. thermal LNXTHERM:01: registered as thermal_zone0
  532. ACPI: Thermal Zone [THRM] (59 C)
  533. sr 2:0:0:0: Attached scsi generic sg0 type 5
  534. sd 0:0:0:0: Attached scsi generic sg1 type 0
  535. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
  536. iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
  537. iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  538. i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  539. lib80211: common routines for IEEE802.11 drivers
  540. lib80211_crypt: registered algorithm 'NULL'
  541. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  542. r8169 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  543. r8169 0000:01:05.0: (unregistered net_device): no PCI Express capability
  544. r8169 0000:01:05.0: eth0: RTL8169sb/8110sb at 0xf9132c00, 00:03:0d:30:d1:6f, XID 10000000 IRQ 19
  545. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a/0x0
  546. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
  547. nvidia: module license 'NVIDIA' taints kernel.
  548. Disabling lock debugging due to kernel taint
  549. ACPI: AC Adapter [AC0] (on-line)
  550. usbcore: registered new interface driver usbfs
  551. usbcore: registered new interface driver hub
  552. usbcore: registered new device driver usb
  553. ACPI: Battery Slot [BAT0] (battery absent)
  554. firewire_ohci 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  555. firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
  556. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  557. ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  558. ehci_hcd 0000:00:1d.7: setting latency timer to 64
  559. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  560. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  561. ehci_hcd 0000:00:1d.7: debug port 1
  562. ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  563. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
  564. ACPI: Cant attach device
  565. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input7
  566. ACPI: Video Device [PEG] (multi-head: yes rom: no post: no)
  567. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  568. hub 1-0:1.0: USB hub found
  569. hub 1-0:1.0: 8 ports detected
  570. uhci_hcd: USB Universal Host Controller Interface driver
  571. uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  572. uhci_hcd 0000:00:1d.0: setting latency timer to 64
  573. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  574. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  575. uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
  576. hub 2-0:1.0: USB hub found
  577. hub 2-0:1.0: 2 ports detected
  578. uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  579. uhci_hcd 0000:00:1d.1: setting latency timer to 64
  580. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  581. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  582. uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
  583. hub 3-0:1.0: USB hub found
  584. hub 3-0:1.0: 2 ports detected
  585. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  586. uhci_hcd 0000:00:1d.2: setting latency timer to 64
  587. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  588. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  589. uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
  590. hub 4-0:1.0: USB hub found
  591. hub 4-0:1.0: 2 ports detected
  592. uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  593. uhci_hcd 0000:00:1d.3: setting latency timer to 64
  594. uhci_hcd 0000:00:1d.3: UHCI Host Controller
  595. uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  596. uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
  597. hub 5-0:1.0: USB hub found
  598. hub 5-0:1.0: 2 ports detected
  599. firewire_core: created device fw0: GUID 00030d4971e19d68, S400
  600. cfg80211: Calling CRDA to update world regulatory domain
  601. ACPI: WMI: Mapper loaded
  602. usb 4-2: new low speed USB device using uhci_hcd and address 2
  603. libipw: 802.11 data/management/control stack, git-1.1.13
  604. libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
  605. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  606. HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
  607. HDA Intel 0000:00:1b.0: setting latency timer to 64
  608. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
  609. ipw2200: Copyright(c) 2003-2006 Intel Corporation
  610. ipw2200 0000:01:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  611. ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
  612. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
  613. ipw2200: Radio Frequency Kill Switch is On:
  614. Kill switch must be turned off for wireless networking to work.
  615. ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
  616. usbcore: registered new interface driver hiddev
  617. input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input9
  618. generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.2-2/input0
  619. usbcore: registered new interface driver usbhid
  620. usbhid: USB HID core driver
  621. nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  622. nvidia 0000:03:00.0: setting latency timer to 64
  623. vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  624. NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.29 Wed Dec 8 12:09:09 PST 2010
  625. EXT3-fs (sda1): using internal journal
  626. EXT3-fs: barriers not enabled
  627. kjournald starting. Commit interval 5 seconds
  628. EXT3-fs (sda2): using internal journal
  629. EXT3-fs (sda2): mounted filesystem with writeback data mode
  630. Adding 1052252k swap on /dev/sda3. Priority:-1 extents:1 across:1052252k
  631. r8169 0000:01:05.0: eth0: link up
  632. NET: Registered protocol family 10
  633. lo: Disabled Privacy Extensions
  634. eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!