API tools faq
paste
Advertisement
Guest User

last_kmsg [xt907]

a guest
Nov 27th, 2013
101
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.19 KB | None | 0 0
raw download clone embed print report
  1. [ 0.333709,0] mot_init_factory_kill: Factory Kill Circuit: enabled
  2. [ 0.342621,0] select_freq_plan: ACPU PVS: Nominal
  3. [ 0.342743,0] select_freq_plan: Max ACPU freq: 1512000 KHz
  4. [ 0.346039,0] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
  5. [ 0.346162,0] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
  6. [ 0.347504,0] mmi_unit_info (SMEM): version = 0x01, system_rev = 0x000082a0, system_serial = 0x00010002098e6892, machine = 'msm8960dt', barcode = 'TA59702YKG', baseband = '', carrier = 'vzw'
  7. [ 0.347718,0] init_sysfs_extended_baseband: No extended_baseband available!
  8. [ 0.350312,0] sps:REVISION of BAM 0xe1828000 is 0x5.
  9. [ 0.350953,0] sps is ready.
  10. [ 0.352662,0] iommu_dev: device vpe mapped at e1c00000, with 2 ctx banks
  11. [ 0.352968,0] iommu_dev: device mdp0 mapped at e1e00000, with 2 ctx banks
  12. [ 0.353151,0] iommu_dev: device mdp1 mapped at e2000000, with 2 ctx banks
  13. [ 0.353395,0] iommu_dev: device rot mapped at e2200000, with 2 ctx banks
  14. [ 0.353578,0] iommu_dev: device ijpeg mapped at e2400000, with 2 ctx banks
  15. [ 0.353822,0] iommu_dev: device vfe mapped at e2600000, with 2 ctx banks
  16. [ 0.354066,0] iommu_dev: device vcodec_a mapped at e2800000, with 2 ctx banks
  17. [ 0.354280,0] iommu_dev: device vcodec_b mapped at e2a00000, with 2 ctx banks
  18. [ 0.354524,0] iommu_dev: device gfx3d mapped at e2c00000, with 3 ctx banks
  19. [ 0.354738,0] iommu_dev: device jpegd mapped at e2e00000, with 2 ctx banks
  20. [ 0.354982,0] iommu_dev: device gfx2d0 mapped at e3000000, with 2 ctx banks
  21. [ 0.355257,0] iommu_dev: device gfx2d1 mapped at e3200000, with 2 ctx banks
  22. [ 0.355501,0] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  23. [ 0.355775,0] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  24. [ 0.355989,0] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  25. [ 0.356233,0] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  26. [ 0.356477,0] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  27. [ 0.356691,0] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  28. [ 0.356966,0] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  29. [ 0.357210,0] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  30. [ 0.357424,0] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  31. [ 0.357668,0] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  32. [ 0.357942,0] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  33. [ 0.358126,0] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  34. [ 0.358400,0] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  35. [ 0.358614,0] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  36. [ 0.358889,0] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  37. [ 0.359163,0] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  38. [ 0.359377,0] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  39. [ 0.359652,0] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  40. [ 0.359896,0] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  41. [ 0.360109,0] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0
  42. [ 0.360384,0] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0
  43. [ 0.373599,0] bio: create slab <bio-0> at 0
  44. [ 0.374027,0] ION heap vmalloc created
  45. [ 0.374088,0] ION heap mm created at b0200000 with size 3800000
  46. [ 0.374240,0] ION heap mm_fw created at b0000000 with size 200000
  47. [ 0.374301,0] ION heap mfc created at b3a00000 with size 2000
  48. [ 0.374423,0] ION heap iommu created
  49. [ 0.374515,0] ION heap qsecom created at af303000 with size 380000
  50. [ 0.374637,0] ION heap audio created at af683000 with size 4cf000
  51. [ 0.375125,0] pm8xxx_pwm_probe: OK
  52. [ 0.375461,0] SCSI subsystem initialized
  53. [ 0.375675,0] sps:REVISION of BAM 0xe1834000 is 0x12.
  54. [ 0.376438,0] usbcore: registered new interface driver usbfs
  55. [ 0.376621,0] usbcore: registered new interface driver hub
  56. [ 0.376743,0] usbcore: registered new device driver usb
  57. [ 0.377201,0] Registered led device: charging
  58. [ 0.377537,1] slimbus:1 laddr:0x0, EAPC:0x1:0x1
  59. [ 0.377628,1] slimbus:1 laddr:0x1, EAPC:0x0:0x1
  60. [ 0.377842,1] slimbus:1 laddr:0x2, EAPC:0x5:0x1
  61. [ 0.378025,0] Registered led device: reserved
  62. [ 0.378971,0] Advanced Linux Sound Architecture Driver Version 1.0.24.
  63. [ 0.379368,0] Bluetooth: Core ver 2.16
  64. [ 0.379490,0] NET: Registered protocol family 31
  65. [ 0.379551,0] Bluetooth: HCI device and connection manager initialized
  66. [ 0.379673,0] Bluetooth: HCI socket layer initialized
  67. [ 0.379734,0] Bluetooth: L2CAP socket layer initialized
  68. [ 0.379917,0] Bluetooth: SCO socket layer initialized
  69. [ 0.380161,0] Switching to clocksource gp_timer
  70. [ 0.394506,0] NET: Registered protocol family 2
  71. [ 0.394689,0] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  72. [ 0.395055,0] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  73. [ 0.395910,0] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  74. [ 0.396429,0] TCP: Hash tables configured (established 131072 bind 65536)
  75. [ 0.396490,0] TCP reno registered
  76. [ 0.396612,0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  77. [ 0.396703,0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  78. [ 0.397100,0] NET: Registered protocol family 1
  79. [ 0.397405,0] RPC: Registered named UNIX socket transport module.
  80. [ 0.397527,0] RPC: Registered udp transport module.
  81. [ 0.397588,0] RPC: Registered tcp transport module.
  82. [ 0.397649,0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  83. [ 0.397924,0] Trying to unpack rootfs image as initramfs...
  84. [ 0.483564,0] Freeing initrd memory: 2348K
  85. [ 0.483808,0] PMU: registered new PMU device of type 0
  86. [ 0.483992,0] PMU: registered new PMU device of type 1
  87. [ 0.484632,1] msm_etb msm_etb: ETB initialized
  88. [ 0.484816,1] msm_tpiu msm_tpiu: TPIU initialized
  89. [ 0.485060,1] msm_funnel msm_funnel: FUNNEL initialized
  90. [ 0.486555,0] msm_etm msm_etm: ETM initialized
  91. [ 0.486677,0] QDSS initialized
  92. [ 0.487562,0] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  93. [ 0.488448,0] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  94. [ 0.489363,0] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  95. [ 0.490218,0] pil_riva pil_riva: using non-secure boot
  96. [ 0.491988,0] smd_channel_probe_worker: allocation table not initialized
  97. [ 0.496169,0] msm_dsps driver version 3.03.
  98. [ 0.496902,0] NET: Registered protocol family 27
  99. [ 0.497298,0] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  100. [ 0.499008,0] modem_8960_init: modem fatal driver init'ed.
  101. [ 0.499191,0] lpass_fatal_init: lpass SSR driver init'ed.
  102. [ 0.499465,0] wcnss_8960: module initialized
  103. [ 0.578330,0] highmem bounce pool size: 64 pages
  104. [ 0.578635,0] ashmem: initialized
  105. [ 0.586204,0] fuse init (API version 7.16)
  106. [ 0.586540,0] msgmni has been set to 974
  107. [ 0.587852,0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  108. [ 0.587913,0] io scheduler noop registered
  109. [ 0.588036,0] io scheduler deadline registered (default)
  110. [ 0.588097,0] io scheduler row registered
  111. [ 0.588219,0] io scheduler cfq registered
  112. [ 0.588341,0] io scheduler sio registered
  113. [ 0.588554,0] io scheduler bfq registered
  114. [ 0.589897,0] mipi_dsi base phy_addr = 0x4700000 virt = 0xe3400000
  115. [ 0.590019,0] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1874000
  116. [ 0.590325,0] msm_fb_detect_panel: not supported 'mipi_mot_cmd_auo_hd_450'
  117. [ 0.590416,0] msm_fb_detect_panel: not supported 'mipi_mot_video_smd_hd_465'
  118. [ 0.590599,0] msm_fb_detect_panel: not supported 'mipi_mot_cmd_auo_qhd_430'
  119. [ 0.590721,0] msm_fb_detect_panel: detected mipi_mot_cmd_smd_qhd_429
  120. [ 0.591088,0] setting pdata->panel_info.fb_num to 3. type: 9
  121. [ 0.601800,0] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
  122. [ 0.602075,0] msm_fb_config_backlight: registered lcd-backlight
  123. [ 0.602350,0] msm_fb_detect_panel: not supported 'hdmi_msm'
  124. [ 0.602838,0] setting pdata->panel_info.fb_num to 1. type: 10
  125. [ 0.603113,0] Inside writeback_driver_init
  126. [ 0.603296,0] Inside writeback_probe
  127. [ 0.603754,0] FrameBuffer[1] 1280x720 size=0 bytes is registered successfully!
  128. [ 0.604608,0]
  129. [ 0.604639,0] msm_vidc_enc: Inside vid_enc_init()
  130. [ 0.604974,0]
  131. [ 0.604974,0] msm_vidc_enc: Inside vid_enc_vcd_init()
  132. [ 0.605493,0] msm_serial: driver initialized
  133. [ 0.605859,0] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  134. [ 0.640958,0] msm_serial_hs.1: ttyHS1 at MMIO 0x16340000 (irq = 184) is a MSM HS UART
  135. [ 0.680482,0] msm_serial_hs module loaded
  136. [ 0.680604,0] msm_serial_hsl: detected port #0
  137. [ 0.680787,0] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
  138. [ 0.680848,0] msm_hsl_power(): Error setting UART clock rate to zero.
  139. [ 0.770608,0] msm_serial_hsl: driver initialized
  140. [ 0.771616,0] msm_rotator_probe: rotator_hw_revision=2
  141. [ 0.772501,0] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  142. [ 0.773447,0] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  143. [ 0.774149,0] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU
  144. [ 0.778452,0] brd: module loaded
  145. [ 0.780405,0] loop: module loaded
  146. [ 0.781138,0] TZCOM: Enabled clock
  147. [ 0.782145,0] Inserting sec module
  148. [ 0.782237,0] tabla-slim tabla-slim: Initialized slim device tabla-slim
  149. [ 0.811262,0] slimbus:1 laddr:0x3, EAPC:0x1:0x60
  150. [ 0.811414,0] slimbus:1 laddr:0x4, EAPC:0x0:0x60
  151. [ 0.941217,0] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
  152. [ 0.943964,0] tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
  153. [ 1.006561,0] wcd9xxx_device_init : Codec version 2 initialized
  154. [ 1.006836,0] wcd9xxx_alloc_slim_sh_ch_tx: pgd_la[3]
  155. [ 1.007019,0] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  156. [ 1.007111,0] i2c-core: driver [tabla-i2c-core] using legacy resume method
  157. [ 1.007599,0] Loading pn544 driver
  158. [ 1.007691,0] pn544_probe : Probing pn544 driver
  159. [ 1.007874,0] pn544_probe : PN544 Misc Minor: 26
  160. [ 1.007935,0] pn544_probe : requesting IRQ 394
  161. [ 1.008454,0] SCSI Media Changer driver v0.25
  162. [ 1.009125,0] PPP generic driver version 2.4.2
  163. [ 1.009339,0] PPP Deflate Compression module registered
  164. [ 1.009430,0] PPP BSD Compression module registered
  165. [ 1.015840,0] PPP MPPE Compression module registered
  166. [ 1.015901,0] NET: Registered protocol family 24
  167. [ 1.016053,0] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  168. [ 1.016145,0] CSLIP: code copyright 1989 Regents of the University of California.
  169. [ 1.016511,0] tun: Universal TUN/TAP device driver, 1.6
  170. [ 1.016633,0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  171. [ 1.017427,0] usbcore: registered new interface driver asix
  172. [ 1.017549,0] usbcore: registered new interface driver cdc_ether
  173. [ 1.017671,0] usbcore: registered new interface driver net1080
  174. [ 1.017823,0] usbcore: registered new interface driver cdc_subset
  175. [ 1.017915,0] usbcore: registered new interface driver zaurus
  176. [ 1.018068,0] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  177. [ 1.018190,0] cdc_ncm: 04-Aug-2011
  178. [ 1.018281,0] usbcore: registered new interface driver cdc_ncm
  179. [ 1.018403,0] usbcore: registered new interface driver rmnet_usb
  180. [ 1.018892,0] rmnet usb ctrl Initialized.
  181. [ 1.018983,0] wcnss_wlan probed in built-in mode
  182. [ 1.019410,0] rmnet_init: BAM devices[8]
  183. [ 1.022279,0] msm_otg msm_otg: msm_otg probe
  184. [ 1.022401,0] msm_otg msm_otg: OTG regs = e18a0000
  185. [ 1.024782,0] msm_otg_probe: MSM OTG Driver will operate in ACCY CONTROL mode
  186. [ 1.024904,0] msm_otg_init_sm: setting default inputs for ACCY mode
  187. [ 1.025362,0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  188. [ 1.025850,0] usbcore: registered new interface driver cdc_acm
  189. [ 1.025911,0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  190. [ 1.026094,0] usbcore: registered new interface driver usblp
  191. [ 1.026155,0] Initializing USB Mass Storage driver...
  192. [ 1.026308,0] usbcore: registered new interface driver usb-storage
  193. [ 1.026369,0] USB Mass Storage support registered.
  194. [ 1.026522,0] usbcore: registered new interface driver ums-alauda
  195. [ 1.026613,0] usbcore: registered new interface driver ums-cypress
  196. [ 1.026766,0] usbcore: registered new interface driver ums-datafab
  197. [ 1.026857,0] usbcore: registered new interface driver ums-freecom
  198. [ 1.027010,0] usbcore: registered new interface driver ums-isd200
  199. [ 1.027163,0] usbcore: registered new interface driver ums-jumpshot
  200. [ 1.027254,0] usbcore: registered new interface driver ums-karma
  201. [ 1.027407,0] usbcore: registered new interface driver ums-onetouch
  202. [ 1.027529,0] usbcore: registered new interface driver ums-sddr09
  203. [ 1.027681,0] usbcore: registered new interface driver ums-sddr55
  204. [ 1.027773,0] usbcore: registered new interface driver ums-usbat
  205. [ 1.027987,0] usbcore: registered new interface driver usbserial
  206. [ 1.028048,0] usbserial: USB Serial Driver core
  207. [ 1.028170,0] USB Serial support registered for Qualcomm USB modem
  208. [ 1.028292,0] usbcore: registered new interface driver qcserial
  209. [ 1.028444,0] usbcore: registered new interface driver usb_ehset_test
  210. [ 1.028536,0] usbcore: registered new interface driver diag_bridge
  211. [ 1.028719,0] usbcore: registered new interface driver mdm_bridge
  212. [ 1.029330,0] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
  213. [ 1.030734,0] android_usb gadget: Mass Storage Function, version: 2009/09/11
  214. [ 1.030856,0] android_usb gadget: Number of LUNs=1
  215. [ 1.030917,0] lun0: LUN: removable file: (no medium)
  216. [ 1.031619,0] android_usb gadget: android_usb ready
  217. [ 1.032748,0] diagchar initialized now
  218. [ 1.032992,0] mousedev: PS/2 mouse device common for all mice
  219. [ 1.033969,0] input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
  220. [ 1.034396,0] usbcore: registered new interface driver xpad
  221. [ 1.034488,0] usbcore: registered new interface driver usb_acecad
  222. [ 1.034610,0] acecad: v3.2:USB Acecad Flair tablet driver
  223. [ 1.034701,0] usbcore: registered new interface driver aiptek
  224. [ 1.034823,0] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  225. [ 1.034884,0] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  226. [ 1.035037,0] usbcore: registered new interface driver gtco
  227. [ 1.035159,0] GTCO usb driver version: 2.00.0006
  228. [ 1.035251,0] usbcore: registered new interface driver hanwang
  229. [ 1.035434,0] usbcore: registered new interface driver kbtab
  230. [ 1.035525,0] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  231. [ 1.035647,0] usbcore: registered new interface driver wacom
  232. [ 1.035739,0] wacom: v1.52:USB Wacom tablet driver
  233. [ 1.035891,0] atmxt_probe: Driver: atmxt-i2c, Version: YN-04-01, Date: 2012-06-28
  234. [ 1.037204,0] atmxt_probe: Probe successful.
  235. [ 1.037631,0] input: light-prox as /devices/virtual/input/input1
  236. [ 1.037997,0] ct406_probe: CT406 part detected
  237. [ 1.038913,0] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
  238. [ 1.039493,0] using input dev keypad_8960 for key reset
  239. [ 1.039615,0] using input dev pmic8xxx_pwrkey for key reset
  240. [ 1.040408,0] using rtc device, pm8xxx_rtc, for alarms
  241. [ 1.040531,0] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  242. [ 1.040866,0] i2c /dev entries driver
  243. [ 1.041294,0] Linux media interface: v0.10
  244. [ 1.041446,0] lirc_dev: IR Remote Control driver registered, major 235
  245. [ 1.041568,0] IR NEC protocol handler initialized
  246. [ 1.041629,0] IR RC5(x) protocol handler initialized
  247. [ 1.041690,0] IR RC6 protocol handler initialized
  248. [ 1.041812,0] IR JVC protocol handler initialized
  249. [ 1.041873,0] IR Sony protocol handler initialized
  250. [ 1.041996,0] IR RC5 (streamzap) protocol handler initialized
  251. [ 1.042057,0] IR LIRC bridge handler initialized
  252. [ 1.042148,0] Linux video capture interface: v2.00
  253. [ 1.042301,0] usbcore: registered new interface driver uvcvideo
  254. [ 1.042362,0] USB Video Class driver (v1.1.0)
  255. [ 1.042698,0] ov8820_power_up R:97 P:95 D:58 A:54 1.8:-
  256. [ 1.134533,0] ov8820 chipid: 8820
  257. [ 1.455882,0] ov8820: match_id success
  258. [ 1.456279,0] msm_sensor_register mctl_node_name[0] = video1
  259. [ 1.456340,0] ov8820_power_down
  260. [ 1.501602,0] ov7736_power_up R:76 P:89 A:82 1.8:8921_l29
  261. [ 1.501693,0] ov7736_regulator_on: 8921_l29 1800000
  262. [ 1.561361,0] ov7736 chipid: 7736
  263. [ 1.561422,0] ov7736: match_id success
  264. [ 1.561666,0] msm_sensor_register mctl_node_name[1] = video3
  265. [ 1.561788,0] ov7736_power_down
  266. [ 1.563863,0] ov7736_regulator_off: 1.8
  267. [ 1.565725,0] Driver for 1-wire Dallas network protocol.
  268. [ 1.582725,0] lm75 10-0048: hwmon0: sensor 'tmp105'
  269. [ 1.603418,0] pm8xxx_tm_probe: OK
  270. [ 1.604028,0] device-mapper: uevent: version 1.0.3
  271. [ 1.604425,0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  272. [ 1.604791,0] cpuidle: using governor ladder
  273. [ 1.604852,0] cpuidle: using governor menu
  274. [ 1.605218,0] mmc0: mci-version: 18
  275. [ 1.606958,0] mmc0: bam physical base=0x12402000
  276. [ 1.607050,0] mmc0: bam virtual base=0xe18ac000
  277. [ 1.607141,0] mmc0: BAM device registered. bam_handle=0xe05a2800
  278. [ 1.607294,0] sps:REVISION of BAM 0xe18ac000 is 0x5.
  279. [ 1.607630,0] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  280. [ 1.607691,0] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  281. [ 1.607843,0] mmc0: No card detect facilities available
  282. [ 1.608087,0] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  283. [ 1.608209,0] mmc0: 8 bit data mode enabled
  284. [ 1.608271,0] mmc0: 4 bit data mode disabled
  285. [ 1.608362,0] mmc0: polling status mode disabled
  286. [ 1.608423,0] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  287. [ 1.608545,0] mmc0: Slot eject status = 0
  288. [ 1.608606,0] mmc0: Power save feature enable = 1
  289. [ 1.608698,0] mmc0: SPS-BAM data transfer mode available
  290. [ 1.608942,0] mmc1: mci-version: 18
  291. [ 1.611506,0] mmc1: bam physical base=0x12182000
  292. [ 1.611567,0] mmc1: bam virtual base=0xe18b8000
  293. [ 1.611689,0] mmc1: BAM device registered. bam_handle=0xe05a2e00
  294. [ 1.611811,0] sps:REVISION of BAM 0xe18b8000 is 0x5.
  295. [ 1.612147,0] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  296. [ 1.612208,0] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  297. [ 1.612818,0] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,651 dma -1 dmacrcri -1
  298. [ 1.612910,0] mmc1: 8 bit data mode disabled
  299. [ 1.612971,0] mmc1: 4 bit data mode enabled
  300. [ 1.613032,0] mmc1: polling status mode disabled
  301. [ 1.613154,0] mmc1: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  302. [ 1.613215,0] mmc1: Slot eject status = 0
  303. [ 1.613337,0] mmc1: Power save feature enable = 1
  304. [ 1.613398,0] mmc1: SPS-BAM data transfer mode available
  305. [ 1.613795,0] pm8xxx_rgb_led_probe: num_leds is 3
  306. [ 1.613947,0] Registered led device: red
  307. [ 1.614008,0] create_pm8xxx_rgb_led: LED class red, gpio 175, can sleep = 1
  308. [ 1.614130,0] create_pm8xxx_rgb_led: requested pwm for red, pwm_id=0
  309. [ 1.614314,0] Registered led device: green
  310. [ 1.614375,0] create_pm8xxx_rgb_led: LED class green, gpio 176, can sleep = 1
  311. [ 1.614497,0] create_pm8xxx_rgb_led: requested pwm for green, pwm_id=1
  312. [ 1.614619,0] Registered led device: blue
  313. [ 1.614680,0] create_pm8xxx_rgb_led: LED class blue, gpio 177, can sleep = 1
  314. [ 1.614741,0] create_pm8xxx_rgb_led: requested pwm for blue, pwm_id=2
  315. [ 1.616328,0] Registered led device: torch-flash
  316. [ 1.618281,0] usbcore: registered new interface driver usbhid
  317. [ 1.618403,0] usbhid: USB HID core driver
  318. [ 1.618800,1] logger: created 1024K log 'log_main'
  319. [ 1.618953,1] logger: created 512K log 'log_events'
  320. [ 1.619166,1] logger: created 64K log 'log_radio'
  321. [ 1.619319,1] logger: created 64K log 'log_system'
  322. [ 1.619594,1] zram: num_devices not specified. Using default: 1
  323. [ 1.619655,1] zram: Creating 1 devices ...
  324. [ 1.620326,1] zcache: using lzo compressor
  325. [ 1.620692,1] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  326. [ 1.621089,1] usbcore: registered new interface driver snd-usb-audio
  327. [ 1.622707,1] msm_pcm_probe: dev name msm-voip-dsp
  328. [ 1.623409,1] msm_pcm_probe: dev name msm-pcm-dsp
  329. [ 1.623622,1] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  330. [ 1.623897,1] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  331. [ 1.624446,1] msm_compr_probe: dev name msm-compr-dsp
  332. [ 1.624721,1] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  333. [ 1.625698,1] msm8960_configure_headset_mic_gpios: US_EURO_, AV_SWITCH gpios not configured!!!
  334. [ 1.625820,1] msm8960_audio_init Fail to configure headset mic gpios
  335. [ 1.625881,1] msm_audio_init: Not the right machine type
  336. [ 1.816511,0] MMI Battery EEPROM Read 192 Bytes
  337. [ 1.825118,0] MMI Battery EEPROM Page 2 Checksum = 0
  338. [ 1.825240,0] MMI Battery EEPROM Page 3 Checksum = 0
  339. [ 1.825301,0] MMI Battery EEPROM Copyright Valid = 1
  340. [ 1.825423,0] MMI Battery Full Capacity 0xC2
  341. [ 1.825484,0] MMI Battery Peak Voltage 0xB9
  342. [ 1.825545,0] MMI Battery DC Impedance 0x5D
  343. [ 1.825667,0] MMI Battery Cell ID 0x424C
  344. [ 1.825942,0] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  345. [ 1.831893,0] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  346. [ 1.837723,0] asoc: null-codec-dai <-> CS-VOICE mapping ok
  347. [ 1.843735,0] asoc: null-codec-dai <-> VoIP mapping ok
  348. [ 1.849565,0] asoc: null-codec-dai <-> MultiMedia3 mapping ok
  349. [ 1.855516,0] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  350. [ 1.857958,1] mmc0: new high speed DDR MMC card at address 0001
  351. [ 1.858415,1] mmcblk0: mmc0:0001 008G92 7.28 GiB
  352. [ 1.858660,1] mmcblk0boot0: mmc0:0001 008G92 partition 1 4.00 MiB
  353. [ 1.858965,1] mmcblk0boot1: mmc0:0001 008G92 partition 2 4.00 MiB
  354. [ 1.861620,1] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38
  355. [ 1.862047,0] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  356. [ 1.865801,1] apanic: Bound to mmc block device 'mmcblk0p33(259:1)'
  357. [ 1.865893,1] apanic: c(1024, 47445) t(49664, 72269) a(49152, 152)
  358. [ 1.867968,1] mmcblk0boot1: unknown partition table
  359. [ 1.868243,0] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  360. [ 1.870074,1] mmcblk0boot0: unknown partition table
  361. [ 1.874195,0] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  362. [ 1.880054,0] asoc: null-codec-dai <-> MultiMedia4 mapping ok
  363. [ 1.885914,0] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
  364. [ 1.891805,0] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok
  365. [ 1.907858,0] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  366. [ 1.933892,0] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  367. [ 1.939813,0] asoc: null-codec-dai <-> MultiMedia5 mapping ok
  368. [ 1.945673,0] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  369. [ 1.951564,0] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  370. [ 1.957393,0] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  371. [ 1.963283,0] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  372. [ 1.969113,0] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  373. [ 1.975034,0] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  374. [ 1.980863,0] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  375. [ 1.986754,0] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  376. [ 1.992614,0] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  377. [ 1.998473,0] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  378. [ 1.998748,0] msm8960_audrx_init : Tabla version 2
  379. [ 1.998992,0] tabla_codec tabla_codec: Failed to add route ANCRight Headset Mic->MIC BIAS3 Internal1
  380. [ 2.047092,0] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  381. [ 2.054265,0] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  382. [ 2.054784,0] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  383. [ 2.055089,0] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  384. [ 2.057225,0] mmc1: host does not support reading read-only switch. assuming write-enable.
  385. [ 2.058843,0] ALSA device list:
  386. [ 2.058904,0] #0: msm8960-snd-card
  387. [ 2.059545,0] mmc1: new high speed SD card at address b368
  388. [ 2.059972,0] mmcblk1: mmc1:b368 958 MiB
  389. [ 2.060552,0] oprofile: using arm/armv7-krait
  390. [ 2.060766,0] GACT probability NOT on
  391. [ 2.060827,0] Mirror/redirect action on
  392. [ 2.060979,0] u32 classifier
  393. [ 2.061101,0] Actions configured
  394. [ 2.061162,0] Netfilter messages via NETLINK v0.30.
  395. [ 2.061254,0] nf_conntrack version 0.5.0 (12917 buckets, 51668 max)
  396. [ 2.061773,0] ctnetlink v0.93: registering with nfnetlink.
  397. [ 2.061864,0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  398. [ 2.061986,0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  399. [ 2.062505,0] xt_time: kernel timezone is -0000
  400. [ 2.062749,0] ip_tables: (C) 2000-2006 Netfilter Core Team
  401. [ 2.062841,0] mmcblk1: p1
  402. [ 2.063360,0] arp_tables: (C) 2002 David S. Miller
  403. [ 2.063482,0] TCP bic registered
  404. [ 2.063543,0] TCP cubic registered
  405. [ 2.063665,0] TCP htcp registered
  406. [ 2.063726,0] Initializing XFRM netlink socket
  407. [ 2.064306,0] NET: Registered protocol family 10
  408. [ 2.065527,0] Mobile IPv6
  409. [ 2.065588,0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  410. [ 2.065771,0] IPv6 over IPv4 tunneling driver
  411. [ 2.066503,0] NET: Registered protocol family 17
  412. [ 2.066595,0] NET: Registered protocol family 15
  413. [ 2.066778,0] Bridge firewalling registered
  414. [ 2.066961,0] Bluetooth: RFCOMM TTY layer initialized
  415. [ 2.067083,0] Bluetooth: RFCOMM socket layer initialized
  416. [ 2.067144,0] Bluetooth: RFCOMM ver 1.11
  417. [ 2.067205,0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  418. [ 2.067327,0] Bluetooth: BNEP filters: protocol multicast
  419. [ 2.067388,0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  420. [ 2.067633,0] L2TP core driver, V2.0
  421. [ 2.067694,0] Registering the dns_resolver key type
  422. [ 2.067816,0] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
  423. [ 2.067968,0] Registering SWP/SWPB emulation handler
  424. [ 2.075202,0] clock_late_init() disabled 202 unused clocks
  425. [ 2.083137,0] MSM Watchdog Initialized
  426. [ 2.087837,1] registered taskstats version 1
  427. [ 2.089272,0] EMU-det(request_gpios): requesting gpio[2] EMU_SCI_OUT_GPIO-205
  428. [ 2.089394,0] EMU-det(request_gpios): gpio 205 is IN
  429. [ 2.089546,0] EMU-det(request_gpios): exporting gpio EMU_SCI_OUT_GPIO-205
  430. [ 2.089668,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_EN_GPIO
  431. [ 2.089729,0] EMU-det(request_gpios): requesting gpio[0] EMU_MUX_CTRL0_GPIO-107
  432. [ 2.089851,0] EMU-det(request_gpios): gpio 107 is OUT
  433. [ 2.089913,0] EMU-det(request_gpios): requesting gpio[1] EMU_MUX_CTRL1_GPIO-96
  434. [ 2.090035,0] EMU-det(request_gpios): gpio 96 is OUT
  435. [ 2.090096,0] EMU-det(request_gpios): requesting gpio[4] SEMU_PPD_DET_GPIO-174
  436. [ 2.090218,0] EMU-det(request_gpios): gpio 174 is IN
  437. [ 2.090370,0] EMU-det(request_gpios): exporting gpio SEMU_PPD_DET_GPIO-174
  438. [ 2.090492,0] EMU-det(request_gpios): requesting gpio[5] SEMU_ALT_MODE_EN_GPIO-186
  439. [ 2.090645,0] EMU-det(request_gpios): exporting gpio SEMU_ALT_MODE_EN_GPIO-186
  440. [ 2.090737,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_GPIO
  441. [ 2.090828,0] EMU-det(request_gpios): requesting gpio[7] DMB_PPD_DET_GPIO-204
  442. [ 2.091042,0] EMU-det(request_gpios): gpio 204 is IN
  443. [ 2.091164,0] EMU-det(request_gpios): exporting gpio DMB_PPD_DET_GPIO-204
  444. [ 2.091286,0] EMU-det(request_gpios): requesting gpio[8] DPLUS_GPIO-192
  445. [ 2.091347,0] EMU-det(request_gpios): requesting gpio[9] DMINUS_GPIO-172
  446. [ 2.091469,0] EMU-det(request_gpios): requesting gpio[10] WHISPER_UART_TX_GPIO-18
  447. [ 2.091530,0] EMU-det(request_gpios): gpio 18 is OUT
  448. [ 2.091713,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_TX_GPIO-18
  449. [ 2.091835,0] EMU-det(request_gpios): requesting gpio[11] WHISPER_UART_RX_GPIO-19
  450. [ 2.091896,0] EMU-det(request_gpios): gpio 19 is IN
  451. [ 2.092049,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_RX_GPIO-19
  452. [ 2.092141,0] EMU-det(request_gpios): requesting gpio[12] TX_PAIR_GPIO-173
  453. [ 2.092232,0] EMU-det(request_gpios): requesting gpio[13] RX_PAIR_GPIO-193
  454. [ 2.092324,0] EMU-det(emu_id_protection_setup): No neccessary action
  455. [ 2.092415,0] EMU-det(emu_det_probe): done with gpios
  456. [ 2.116801,1] msm_otg msm_otg: phy_reset: success
  457. [ 2.220967,1] EMU-det(request_irqs): requesting irq[1] EMU_SCI_OUT_GPIO-577
  458. [ 2.221333,1] EMU-det(request_irqs): requesting irq[0] SEMU_PPD_DET_GPIO-654
  459. [ 2.221699,1] EMU-det(emu_det_probe): done with irqs
  460. [ 2.222035,1] EMU-det(emu_det_probe): registered callback with PM8921
  461. [ 2.223164,1] EMU-det(emu_det_probe): EMU detection driver started
  462. [ 2.223836,1] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-11-28 00:01:07 UTC (1385596867)
  463. [ 2.225331,0] Battery Cell ID Found: 9
  464. [ 2.228963,0] read_shutdown_soc: shutdown_soc = 77
  465. [ 2.229909,0] read_ocv_trim: program rev reg is 0x33
  466. [ 2.230276,0] read_ocv_trim: trim reg is 0x44
  467. [ 2.230459,0] read_ocv_trim: trim delta is 5
  468. [ 2.236136,0] adjust_remaining_charge_for_shutdown_soc: shutdown_soc = 77 forcing it now
  469. [ 2.236502,0] adjust_remaining_charge_for_shutdown_soc: To force shutdown_soc = 77, rc = 1540778, pc = 77, ocv mv = 4064
  470. [ 2.236868,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 77 for ocv = 4064
  471. [ 2.237204,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  472. [ 2.237417,0] pm8921_bms_probe: OK battery_capacity_at_boot=77 volt = 3893799 ocv = 4064000
  473. [ 2.240286,0] get_prop_batt_status: alarm_state=0,batt_valid=0
  474. [ 2.245139,0] pm8921_is_battery_charging: called before init
  475. [ 2.245231,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  476. [ 2.253715,0] get_prop_batt_status: alarm_state=0,batt_valid=0
  477. [ 2.253837,0] get_prop_batt_status: alarm_state=0,batt_valid=0
  478. [ 2.256218,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  479. [ 2.262841,1] EMU-det(emu_det_vbus_state): PM8921 USBIN callback: in
  480. [ 2.264642,0] Battery Cell ID Found: 9
  481. [ 2.266198,0] Warning: unable to open an initial console.
  482. [ 2.266992,0] Freeing init memory: 992K
  483. [ 2.354646,0] systemd-udevd[147]: starting version 204
  484. [ 2.453685,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  485. [ 2.559346,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  486. [ 2.572348,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  487. [ 2.586265,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  488. [ 2.761300,1] EMU-det(detection_work): state CONFIG, time since last run -297250 ms
  489. [ 2.761544,1] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
  490. [ 2.771310,1] EMU-det(detection_work): state SAMPLE, time since last run 10 ms
  491. [ 2.772531,1] EMU-det(adc_vbus_get): vbus=5012 mV
  492. [ 2.831344,1] EMU-det(get_sense): SEMU_PPD_DET: ID floating
  493. [ 2.891561,1] EMU-det(get_sense): No need to check DMB_PPD_DET_N
  494. [ 2.891713,1] EMU-det(sense_dp_dm): D+/D- mask: 0x0
  495. [ 2.891774,1] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
  496. [ 2.891896,1] EMU-det(detection_work): SAMPLE keep waiting ...
  497. [ 2.901358,1] EMU-det(detection_work): state SAMPLE, time since last run 130 ms
  498. [ 2.902609,0] EMU-det(adc_vbus_get): vbus=5012 mV
  499. [ 2.961330,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
  500. [ 3.021364,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
  501. [ 3.021608,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
  502. [ 3.021730,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
  503. [ 3.021944,0] EMU-det(detection_work): state IDENTIFY, time since last run 120 ms
  504. [ 3.023195,0] EMU-det(adc_vbus_get): vbus=5012 mV
  505. [ 3.081367,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
  506. [ 3.141400,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
  507. [ 3.141522,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
  508. [ 3.141614,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
  509. [ 3.141706,0] EMU-det(notify_accy): EMU detection Notify: USB
  510. [ 3.141980,0] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
  511. [ 3.142072,0] msm_otg msm_otg: received VBUS event
  512. [ 3.142163,0] msm_otg msm_otg: UNDEFINED --> PERIPHERAL
  513. [ 3.142347,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 7
  514. [ 3.143140,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 0
  515. [ 3.145124,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  516. [ 3.163253,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  517. [ 3.166152,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  518. [ 3.169784,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  519. [ 3.173721,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  520. [ 3.186540,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  521. [ 3.197436,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  522. [ 3.208393,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  523. [ 3.219380,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  524. [ 3.230459,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 77
  525. [ 3.443216,0] initrd: mounting /dev/mmcblk0p38
  526. [ 3.450938,0] EXT3-fs (mmcblk0p38): error: couldn't mount because of unsupported optional features (40)
  527. [ 3.482771,0] EXT2-fs (mmcblk0p38): error: couldn't mount because of unsupported optional features (44)
  528. [ 3.540668,1] zcache: created ephemeral tmem pool, id=0, client=65535
  529. [ 3.542133,1] EXT4-fs (mmcblk0p38): recovery complete
  530. [ 3.542347,1] EXT4-fs (mmcblk0p38): mounted filesystem with ordered data mode. Opts: (null)
  531. [ 3.873859,0] Kernel panic - not syncing: Attempted to kill init!
  532. [ 3.874164,1] CPU1: stopping
  533. [ 3.874408,1] [<c010b5f0>] (unwind_backtrace+0x0/0xe0) from [<c010a0f8>] (handle_IPI+0x100/0x1d8)
  534. [ 3.874774,1] [<c010a0f8>] (handle_IPI+0x100/0x1d8) from [<c010040c>] (gic_handle_irq+0x8c/0x9c)
  535. [ 3.875019,1] [<c010040c>] (gic_handle_irq+0x8c/0x9c) from [<c07f33d4>] (__irq_svc+0x54/0x80)
  536. [ 3.875385,1] Exception stack(0xc8c7ff70 to 0xc8c7ffb8)
  537. [ 3.875721,1] ff60: 00000000 00000000 00000001 00000000
  538. [ 3.875934,1] ff80: c2ae12c8 00000989 c0cbb3cc c0cbb7f0 00000000 511f04d4 00000001 00000000
  539. [ 3.876300,1] ffa0: 00000000 c8c7ffb8 c07f5730 c014454c 60000013 ffffffff
  540. [ 3.876667,1] [<c07f33d4>] (__irq_svc+0x54/0x80) from [<c014454c>] (msm_cpuidle_enter+0x64/0x74)
  541. [ 3.877063,1] [<c014454c>] (msm_cpuidle_enter+0x64/0x74) from [<c05b4f18>] (cpuidle_idle_call+0x1e4/0x380)
  542. [ 3.877277,1] [<c05b4f18>] (cpuidle_idle_call+0x1e4/0x380) from [<c01067d8>] (cpu_idle+0x50/0xe8)
  543. [ 3.877643,1] [<c01067d8>] (cpu_idle+0x50/0xe8) from [<809e10b4>] (0x809e10b4)
  544. [ 3.878010,0] mbm_version=0x0000109b
  545. [ 3.878162,0] CPU type is ACPU PVS: Nominal
  546. [ 3.881458,0] In oops, interrupt is disabled on IRQ18
  547. [ 4.096688,0] Crash partition in use!
  548. [ 4.096841,0] wcnss_8960: crash shutdown : 0
  549. [ 4.197558,0] Rebooting in 5 seconds..
  550. [ 9.206683,0] Going down for restart now
  551.  
  552. No errors detected
  553. CPU type is ACPU PVS: Nominal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!