Advertisement
Guest User

Untitled

a guest
Jun 26th, 2015
340
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.62 KB | None | 0 0
  1.  
  2. U-Boot-PetaLinux> bootm 0x2000000 0x3000000 0x2A00000
  3. ## Booting kernel from Legacy Image at 02000000 ...
  4. Image Name: Linux-3.8.11-xilinx
  5. Image Type: ARM Linux Kernel Image (uncompressed)
  6. Data Size: 2858760 Bytes = 2.7 MiB
  7. Load Address: 00008000
  8. Entry Point: 00008000
  9. Verifying Checksum ... OK
  10. ## Loading init Ramdisk from Legacy Image at 03000000 ...
  11. Image Name: core-image-sato-zedboard-zynq7-2
  12. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  13. Data Size: 47650964 Bytes = 45.4 MiB
  14. Load Address: 00000000
  15. Entry Point: 00000000
  16. Verifying Checksum ... OK
  17. ## Flattened Device Tree blob at 02a00000
  18. Booting using the fdt blob at 0x2a00000
  19. Loading Kernel Image ... OK
  20. Loading Ramdisk to 1ce16000, end 1fb87894 ... OK
  21. Loading Device Tree to 07ff7000, end 07fffa1f ... OK
  22.  
  23. Starting kernel ...
  24.  
  25. Booting Linux on physical CPU 0x0
  26. Linux version 3.8.11-xilinx (lukas@lukas-Lenovo-B50-30) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Tue Jun 23 19:35:50 CEST 2015
  27. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  28. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  29. Machine: Xilinx Zynq Platform, model: ZedBoard
  30. bootconsole [earlycon0] enabled
  31. cma: CMA: reserved 16 MiB at 1bc00000
  32. Memory policy: ECC disabled, Data cache writealloc
  33. PERCPU: Embedded 7 pages/cpu @c09a6000 s7616 r8192 d12864 u32768
  34. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  35. Kernel command line: console=ttyPS0,115200 root=/dev/ram rw earlyprintk
  36. PID hash table entries: 2048 (order: 1, 8192 bytes)
  37. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  38. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  39. __ex_table already sorted, skipping sort
  40. Memory: 512MB = 512MB total
  41. Memory: 450956k/450956k available, 73332k reserved, 0K highmem
  42. Virtual kernel memory layout:
  43. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  44. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  45. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  46. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  47. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  48. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  49. .text : 0xc0008000 - 0xc050f8bc (5151 kB)
  50. .init : 0xc0510000 - 0xc0539dc0 ( 168 kB)
  51. .data : 0xc053a000 - 0xc0573688 ( 230 kB)
  52. .bss : 0xc0573688 - 0xc059dcdc ( 170 kB)
  53. Preemptible hierarchical RCU implementation.
  54. Dump stacks of tasks blocking RCU-preempt GP.
  55. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  56. NR_IRQS:16 nr_irqs:16 16
  57. xslcr mapped to e0802000
  58. Zynq clock init
  59. sched_clock: 16 bits at 54kHz, resolution 18432ns, wraps every 1207ms
  60. ps7-ttc #0 at e0804000, irq=43
  61. Console: colour dummy device 80x30
  62. Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
  63. pid_max: default: 32768 minimum: 301
  64. Mount-cache hash table entries: 512
  65. CPU: Testing write buffer coherency: ok
  66. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  67. Setting up static identity map for 0x3ac9d0 - 0x3aca04
  68. L310 cache controller enabled
  69. l2x0: 8 ways, CACHE_ID 0x000000c0, AUX_CTRL 0x72360000, Cache size: 524288 B
  70. CPU1: Booted secondary processor
  71. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  72. Brought up 2 CPUs
  73. SMP: Total of 2 processors activated (2664.03 BogoMIPS).
  74. devtmpfs: initialized
  75. NET: Registered protocol family 16
  76. DMA: preallocated 256 KiB pool for atomic coherent allocations
  77. xgpiops e000a000.ps7-gpio: gpio at 0xe000a000 mapped to 0xe080c000
  78. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  79. hw-breakpoint: maximum watchpoint size is 4 bytes.
  80. bio: create slab <bio-0> at 0
  81. vgaarb: loaded
  82. SCSI subsystem initialized
  83. usbcore: registered new interface driver usbfs
  84. usbcore: registered new interface driver hub
  85. usbcore: registered new device driver usb
  86. pps_core: LinuxPPS API ver. 1 registered
  87. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  88. PTP clock support registered
  89. Switching to clocksource xttcps_clocksource
  90. NET: Registered protocol family 2
  91. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  92. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  93. TCP: Hash tables configured (established 4096 bind 4096)
  94. TCP: reno registered
  95. UDP hash table entries: 256 (order: 1, 8192 bytes)
  96. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  97. NET: Registered protocol family 1
  98. RPC: Registered named UNIX socket transport module.
  99. RPC: Registered udp transport module.
  100. RPC: Registered tcp transport module.
  101. RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. Trying to unpack rootfs image as initramfs...
  103. Freeing initrd memory: 46532K
  104. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  105. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  106. msgmni has been set to 1003
  107. io scheduler noop registered
  108. io scheduler deadline registered
  109. io scheduler cfq registered (default)
  110. dma-pl330 f8004000.ps7-dma: PERIPH_ID 0x0, PCELL_ID 0x0 !
  111. dma-pl330: probe of f8004000.ps7-dma failed with error -22
  112. dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-267056
  113. dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  114. e0001▒˽▒▒[ttyPS0] enabled, bootconsole disabled
  115. console [ttyPS0] enabled, bootconsole disabled
  116. xdevcfg f8007000.ps7-dev-cfg: ioremap f8007000 to e0864000 with size 100
  117. brd: module loaded
  118. loop: module loaded
  119. xspips e0006000.ps7-spi: master is unqueued, this is deprecated
  120. xspips e0006000.ps7-spi: at 0xE0006000 mapped to 0xE0866000, irq=58
  121. xspips e0007000.ps7-spi: master is unqueued, this is deprecated
  122. xspips e0007000.ps7-spi: at 0xE0007000 mapped to 0xE0868000, irq=81
  123. xqspips e000d000.ps7-qspi: master is unqueued, this is deprecated
  124. m25p80 spi32766.0: found s25fl256s1, expected n25q128
  125. m25p80 spi32766.0: fallback to 3-byte address mode
  126. m25p80 spi32766.0: maximum accessible size is 16MB
  127. m25p80 spi32766.0: s25fl256s1 (32768 Kbytes)
  128. 5 ofpart partitions found on MTD device spi32766.0
  129. Creating 5 MTD partitions on "spi32766.0":
  130. 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
  131. 0x000000100000-0x000000600000 : "qspi-linux"
  132. 0x000000600000-0x000000620000 : "qspi-device-tree"
  133. 0x000000620000-0x000000c00000 : "qspi-rootfs"
  134. 0x000000c00000-0x000001000000 : "qspi-bitstream"
  135. xqspips e000d000.ps7-qspi: at 0xE000D000 mapped to 0xE086A000, irq=51
  136. e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
  137. e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
  138. libphy: XEMACPS mii bus: probed
  139. xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
  140. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  141. ehci-pci: EHCI PCI platform driver
  142. xusbps-dr e0002000.ps7-usb: Unable to init USB phy, missing?
  143. Initializing USB Mass Storage driver...
  144. usbcore: registered new interface driver usb-storage
  145. USB Mass Storage support registered.
  146. mousedev: PS/2 mouse device common for all mice
  147. i2c /dev entries driver
  148. xadcps f8007100.ps7-xadc: enabled: yes reference: external
  149. sdhci: Secure Digital Host Controller Interface driver
  150. sdhci: Copyright(c) Pierre Ossman
  151. sdhci-pltfm: SDHCI platform and OF driver helper
  152. mmc0: Invalid maximum block size, assuming 512 bytes
  153. mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  154. usbcore: registered new interface driver usbhid
  155. usbhid: USB HID core driver
  156. TCP: cubic registered
  157. NET: Registered protocol family 17
  158. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  159. Registering SWP/SWPB emulation handler
  160. dmatest: Started 1 threads using dma0chan0
  161. dmatest: Started 1 threads using dma0chan1
  162. dmatest: Started 1 threads using dma0chan2
  163. dmatest: Started 1 threads using dma0chan3
  164. dmatest: Started 1 threads using dma0chan4
  165. dmatest: Started 1 threads using dma0chan5
  166. dmatest: Started 1 threads using dma0chan6
  167. dmatest: Started 1 threads using dma0chan7
  168. Freeing init memory: 164K
  169. Failed to execute /init
  170. INIT: mmc0: new SD card at address e624
  171. mmcblk0: mmc0:e624 SD02G 1.84 GiB
  172. version 2.88 booting mmcblk0: p1
  173.  
  174. Error opening /dev/fb0: No such device
  175. Starting udev
  176. udevd[695]: starting version 182
  177. Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
  178. bootlogd.
  179. Populating dev cache
  180. Configuring network interfaces... udhcpc (v1.21.1) started
  181. Sending discover...
  182. Sending discover...
  183. xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
  184. xemacps e000b000.ps7-ethernet: link up (1000/FULL)
  185. Sending discover...
  186. No lease, failing
  187. Starting rpcbind daemon...rpcbind: cannot create socket for udp6
  188. rpcbind: cannot create socket for tcp6
  189. done.
  190. hwclock: can't open '/dev/misc/rtc': No such file or directory
  191. Fri Jun 26 12:21:00 UTC 2015
  192. hwclock: can't open '/dev/misc/rtc': No such file or directory
  193. INIT: Entering runlevel: 5
  194. Starting Xserver
  195. open /dev/fb0: No such file or directory
  196. Starting system message bus: dbus.
  197. Starting Connection Manager
  198. Starting Dropbear SSH server: Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
  199. Generating key, this may take a while...
  200. Public key portion is:
  201. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCGTYhFMT0ZaJW8H/+FWuF1xksE/XxG4Y2COX1ZLd7JdkIFhRHXgRu3DWYvtkfFCGvLPCu8r+XYFFz+piuiYlz5eUho+RnkLBXUz9FTDggfin3138XSQgxm54SH3RzKbSigBUtC07MjaYW6k2B+0bVgMMIVyvkHMem3R52vUeR5Y6P7 root@zedboard-zynq7
  202. Fingerprint: md5 b2:79:16:a2:e8:fa:4c:63:0e:c2:a6:ee:24:d8:f5:ec
  203. dropbear.
  204. hwclock: can't open '/dev/misc/rtc': No such file or directory
  205. Starting syslogd/klogd: done
  206. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
  207. ...done.
  208. Starting Telephony daemon
  209. Stopping Bootlog daemon: bootlogd.
  210.  
  211. Poky (Yocto Project Reference Distro) 1.5.4 zedboard-zynq7 /dev/ttyPS0
  212.  
  213. zedboard-zynq7 login: root
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement