Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Tail of dmesg.boot:
- Copyright (c) 1992-2013 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-STABLE #1: Mon Dec 31 22:28:36 CET 2012
- root@AryaStark.norad:/usr/obj/GENERIC/amd64/usr/src/sys/GENERIC amd64
- CPU: AMD Athlon(tm) II X4 610e Processor (2394.83-MHz K8-class CPU)
- Origin = "AuthenticAMD" Id = 0x100f53 Family = 0x10 Model = 0x5 Stepping = 3
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x802009<SSE3,MON,CX16,POPCNT>
- AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
- AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
- TSC: P-state invariant
- real memory = 8589934592 (8192 MB)
- avail memory = 8232087552 (7850 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <112609 APIC1803>
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- ctl: CAM Target Layer loaded
- acpi0: <112609 RSDT1803> on motherboard
- acpi0: Power Button (fixed)
- acpi0: reservation of fee00000, 1000 (3) failed
- acpi0: reservation of ffb80000, 80000 (3) failed
- acpi0: reservation of fec10000, 20 (3) failed
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, c7e00000 (3) failed
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- hpet0: HPET never increments, disabling
- device_attach: hpet0 attach returned 6
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xc8000000-0xcfffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
- hdac0: <ATI (0x970f) HDA Controller> mem 0xfe9e8000-0xfe9ebfff irq 19 at device 5.1 on pci1
- pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- vgapci1: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeae0000-0xfeafffff irq 18 at device 0.0 on pci2
- hdac1: <ATI RV840 HDA Controller> mem 0xfeabc000-0xfeabffff irq 19 at device 0.1 on pci2
- pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci3
- re0: Using 1 MSI-X message
- re0: Chip rev. 0x28000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: 00:25:22:34:96:dd
- ahci0: <ATI IXP700 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0
- ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0
- usbus0 on ohci0
- ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0
- usbus1 on ohci1
- ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci0
- ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0
- usbus3 on ohci2
- ohci3: <OHCI (generic) USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0
- usbus4 on ohci3
- ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0
- usbus5: EHCI version 1.0
- usbus5 on ehci1
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
- ata1: <ATA channel> at channel 1 on atapci0
- hdac2: <ATI SB600 HDA Controller> mem 0xfe7f0000-0xfe7f3fff irq 16 at device 20.2 on pci0
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci4: <ACPI PCI bus> on pcib4
- ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0
- usbus6 on ohci4
- amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
- acpi_button0: <Power Button> on acpi0
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- hwpstate0: <Cool`n'Quiet 2.0> on cpu0
- Timecounters tick every 1.000 msec
- hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0
- hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0
- pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0
- hdacc1: <ATI R6xx HDA CODEC> at cad 0 on hdac1
- hdaa1: <ATI R6xx Audio Function Group> at nid 1 on hdacc1
- pcm1: <ATI R6xx (HDMI)> at nid 3 on hdaa1
- hdacc2: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac2
- hdaa2: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc2
- hdaa2: No presence detection support at nid 29
- pcm2: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,31,30,27 on hdaa2
- pcm3: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa2
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 480Mbps High Speed USB v2.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 480Mbps High Speed USB v2.0
- usbus6: 12Mbps Full Speed USB v1.0
- ugen0.1: <ATI> at usbus0
- uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <ATI> at usbus1
- uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <ATI> at usbus2
- uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- ugen3.1: <ATI> at usbus3
- uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <ATI> at usbus4
- uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <ATI> at usbus5
- uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
- ugen6.1: <ATI> at usbus6
- uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
- uhub6: 2 ports with 2 removable, self powered
- uhub0: 3 ports with 3 removable, self powered
- uhub1: 3 ports with 3 removable, self powered
- uhub3: 3 ports with 3 removable, self powered
- uhub4: 3 ports with 3 removable, self powered
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <WDC WD10EALS-00Z8A0 05.01D05> ATA-8 SATA 2.x device
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada1: <WDC WD10EALS-00Z8A0 05.01D05> ATA-8 SATA 2.x device
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad6
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #3 Launched!
- cd1 at ahcich3 bus 0 scbus3 target 0 lun 0
- cd1: <Optiarc DVD RW AD-7240S 1.03> Removable CD-ROM SCSI-0 device
- SMP: AP CPU #2 Launched!
- cd1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
- cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- Timecounter "TSC-low" frequency 9354805 Hz quality 800
- cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
- cd0: <HL-DT-ST BD-RE BH10LS30 1.01> Removable CD-ROM SCSI-0 device
- cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- Root mount waiting for: usbus5 usbus2
- uhub2: 6 ports with 6 removable, self powered
- uhub5: 6 ports with 6 removable, self powered
- Root mount waiting for: usbus2
- Trying to mount root from ufs:/dev/ufs/3root [rw,noatime]...
- ugen0.2: <vendor 0x046d> at usbus0
- uhid0: <vendor 0x046d product 0xc212, class 0/0, rev 1.00/1.05, addr 2> on usbus0
- ugen1.2: <vendor 0x05e3> at usbus1
- ums0: <vendor 0x05e3 USB Mouse, class 0/0, rev 1.00/1.01, addr 2> on usbus1
- ums0: 5 buttons and [XYZ] coordinates ID=0
- ugen0.3: <Microsoft> at usbus0
- ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 3> on usbus0
- kbd2 at ukbd0
- uhid1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 3> on usbus0
- GEOM_SCHED: Initializing global data.
- GEOM_SCHED: Loading: mp = 0xffffffff8161df60, g_sched_class = 0xffffffff8161df60.
- GEOM_SCHED: Modevent 0.
- GEOM_SCHED: Loaded module rr error 0.
- GEOM_SCHED: Device ada0.sched. created.
- GEOM_SCHED: Device ada1.sched. created.
- drm0: <ATI Radeon HD 4200> on vgapci0
- info: [drm] MSI enabled 1 message(s)
- info: [drm] Initialized radeon 1.31.0 20080613
- info: [drm] Setting GART location based on new memory map
- info: [drm] Loading RS780/RS880 Microcode
- info: [drm] Resetting GPU
- info: [drm] writeback test succeeded in 1 usecs
- info: [drm] Resetting GPU
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement