Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Terminal ready
- U-Boot SPL 2013.10-rc3-00001-g0db8b57 (Sep 18 2013 - 15:11:27)
- OMAP5432 ES2.0
- SPL: Please implement spl_start_uboot() for your board
- SPL: Direct Linux boot not active!
- reading u-boot.img
- reading u-boot.img
- U-Boot 2013.10-rc3-00001-g0db8b57 (Sep 18 2013 - 15:11:27)
- CPU : OMAP5432 ES2.0
- Board: OMAP5432 uEVM
- I2C: ready
- DRAM: 2 GiB
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Using default environment
- Net: No ethernet found.
- Hit any key to stop autoboot: 1 0
- mmc0 is current device
- reading boot.scr
- ** Unable to read file boot.scr **
- reading uEnv.txt
- 454 bytes read in 3 ms (147.5 KiB/s)
- Importing environment from mmc0 ...
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- scanning usb for ethernet devices... 1 Ethernet Device(s) found
- usbethaddr=02:41:00:87:a1:02
- Waiting for Ethernet connection... done.
- BOOTP broadcast 1
- *** Unhandled DHCP Option in OFFER/ACK: 44
- *** Unhandled DHCP Option in OFFER/ACK: 46
- *** Unhandled DHCP Option in OFFER/ACK: 150
- *** Unhandled DHCP Option in OFFER/ACK: 44
- *** Unhandled DHCP Option in OFFER/ACK: 46
- *** Unhandled DHCP Option in OFFER/ACK: 150
- DHCP client bound to address 128.247.91.32
- Using sms0 device
- TFTP from server 128.247.91.59; our IP address is 128.247.91.32
- Filename '/tftpboot/kernel/zImage'.
- Load address: 0x82000000
- Loading: *#################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ########################
- 555.7 KiB/s
- done
- Bytes transferred = 4114728 (3ec928 hex)
- stopping USB..
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- scanning usb for ethernet devices... 1 Ethernet Device(s) found
- usbethaddr=02:41:00:87:a1:02
- Waiting for Ethernet connection... done.
- BOOTP broadcast 1
- *** Unhandled DHCP Option in OFFER/ACK: 44
- *** Unhandled DHCP Option in OFFER/ACK: 46
- *** Unhandled DHCP Option in OFFER/ACK: 150
- *** Unhandled DHCP Option in OFFER/ACK: 44
- *** Unhandled DHCP Option in OFFER/ACK: 46
- *** Unhandled DHCP Option in OFFER/ACK: 150
- DHCP client bound to address 128.247.91.32
- Using sms0 device
- TFTP from server 128.247.91.59; our IP address is 128.247.91.32
- Filename '/tftpboot/kernel/omap5-uevm.dtb'.
- Load address: 0x80f80000
- Loading: *##########
- 529.3 KiB/s
- done
- Bytes transferred = 50452 (c514 hex)
- stopping USB..
- Booting from mmc0 ...
- Kernel image @ 0x82000000 [ 0x000000 - 0x3ec928 ]
- ## Flattened Device Tree blob at 80f80000
- Booting using the fdt blob at 0x80f80000
- Using Device Tree in place at 80f80000, end 80f8f513
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.12.0-rc6-00701-g61cf767 (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #33 SMP Thu Oct 24 08:50:38 CDT 2013
- [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: Generic OMAP5 (Flattened Device Tree), model: TI OMAP5 uEVM board
- [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] OMAP4: Map 0xfee00000 to 0xfe600000 for dram barrier
- [ 0.000000] OMAP5432 ES2.0
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1fa4000 s14656 r8192 d14016 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518160
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait no_console_suspend earlyprintk
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 2030876K/2078720K available (5339K kernel code, 656K rwdata, 2064K rodata, 406K init, 5522K bss, 47844K reserved, 1300480K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0742e18 (7404 kB)
- [ 0.000000] .init : 0xc0743000 - 0xc07a8940 ( 407 kB)
- [ 0.000000] .data : 0xc07aa000 - 0xc084e348 ( 657 kB)
- [ 0.000000] .bss : 0xc084e348 - 0xc0db2be8 (5523 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (virt).
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: ARM arch timer >56 bits at 6144kHz, resolution 162ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 3695 kB
- [ 0.000000] per task-struct memory footprint: 1152 bytes
- [ 20.817603] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440)
- [ 20.817615] pid_max: default: 32768 minimum: 301
- [ 20.817884] Security Framework initialized
- [ 20.817968] Mount-cache hash table entries: 512
- [ 20.842422] CPU: Testing write buffer coherency: ok
- [ 20.843100] /cpus/cpu@0 missing clock-frequency property
- [ 20.843119] /cpus/cpu@1 missing clock-frequency property
- [ 20.843130] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 20.843150] Setting up static identity map for 0xc050fab8 - 0xc050fb28
- [ 20.845893] CPU1: Booted secondary processor
- [ 20.845921] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 20.846277] Brought up 2 CPUs
- [ 20.846289] SMP: Total of 2 processors activated.
- [ 20.846296] CPU: All CPU(s) started in SVC mode.
- [ 20.847885] devtmpfs: initialized
- [ 20.856147] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 20.874083] omap_hwmod: dss_dispc: cannot be enabled for reset (3)
- [ 20.876507] omap_hwmod: dss_dsi1: cannot be enabled for reset (3)
- [ 20.878919] omap_hwmod: dss_dsi2: cannot be enabled for reset (3)
- [ 20.881326] omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
- [ 20.883731] omap_hwmod: dss_rfbi: cannot be enabled for reset (3)
- [ 20.924022] pinctrl core: initialized pinctrl subsystem
- [ 20.925977] regulator-dummy: no parameters
- [ 20.927303] NET: Registered protocol family 16
- [ 20.930869] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 21.000425] platform mpu.2: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.004497] OMAP GPIO hardware version 0.1
- [ 21.014809] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
- [ 21.015062] omap-gpmc 50000000.gpmc: error: clk_get
- [ 21.015091] omap-gpmc: probe of 50000000.gpmc failed with error -2
- [ 21.020411] platform 4a141100.sata: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.029122] platform 4a080000.ocp2scp: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.029515] platform 4a062000.usbhstll: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.029542] platform 4a062000.usbhstll: FIXME: clock-name 'usb_ch2_clk' DOES NOT exist in dt!
- [ 21.029568] platform 4a062000.usbhstll: FIXME: clock-name 'usb_ch0_clk' DOES NOT exist in dt!
- [ 21.029595] platform 4a062000.usbhstll: FIXME: clock-name 'usb_ch1_clk' DOES NOT exist in dt!
- [ 21.029935] platform 4a064000.usbhshost: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.030716] platform 58000000.dss: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.030744] platform 58000000.dss: FIXME: clock-name '32khz_clk' DOES NOT exist in dt!
- [ 21.030771] platform 58000000.dss: FIXME: clock-name 'sys_clk' DOES NOT exist in dt!
- [ 21.030798] platform 58000000.dss: FIXME: clock-name 'hdmi_clk' DOES NOT exist in dt!
- [ 21.031221] platform 58001000.dispc: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.031249] platform 58001000.dispc: FIXME: clock-name 'sys_clk' DOES NOT exist in dt!
- [ 21.031854] platform 58002000.encoder: FIXME: clock-name 'ick' DOES NOT exist in dt!
- [ 21.032302] platform 58004000.encoder: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.032330] platform 58004000.encoder: FIXME: clock-name 'sys_clk' DOES NOT exist in dt!
- [ 21.032750] platform 58005000.encoder: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.032779] platform 58005000.encoder: FIXME: clock-name 'sys_clk' DOES NOT exist in dt!
- [ 21.033314] platform 58040000.encoder: FIXME: clock-name 'fck' DOES NOT exist in dt!
- [ 21.033342] platform 58040000.encoder: FIXME: clock-name 'sys_clk' DOES NOT exist in dt!
- [ 21.035580] No ATAGs?
- [ 21.035602] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 21.035610] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 21.037516] OMAP DMA hardware revision 0.0
- [ 21.060732] bio: create slab <bio-0> at 0
- [ 21.063378] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
- [ 21.063401] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
- [ 21.095328] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
- [ 21.096513] vmmcsd_fixed: 3000 mV
- [ 21.100579] SCSI subsystem initialized
- [ 21.101720] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c1_pins, deferring probe
- [ 21.101739] platform 48070000.i2c: Driver omap_i2c requests probe deferral
- [ 21.101779] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c5_pins, deferring probe
- [ 21.101796] platform 4807c000.i2c: Driver omap_i2c requests probe deferral
- [ 21.105458] Switched to clocksource arch_sys_counter
- [ 21.181223] NET: Registered protocol family 2
- [ 21.182238] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 21.182485] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
- [ 21.184702] TCP: Hash tables configured (established 8192 bind 8192)
- [ 21.184815] TCP: reno registered
- [ 21.184832] UDP hash table entries: 512 (order: 3, 40960 bytes)
- [ 21.185162] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
- [ 21.186108] NET: Registered protocol family 1
- [ 21.186859] RPC: Registered named UNIX socket transport module.
- [ 21.186869] RPC: Registered udp transport module.
- [ 21.186876] RPC: Registered tcp transport module.
- [ 21.186883] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 21.187395] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 21.277981] bounce pool size: 64 pages
- [ 21.278346] VFS: Disk quotas dquot_6.5.2
- [ 21.278482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 21.279933] NFS: Registering the id_resolver key type
- [ 21.280134] Key type id_resolver registered
- [ 21.280144] Key type id_legacy registered
- [ 21.280208] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 21.280562] msgmni has been set to 1458
- [ 21.283490] io scheduler noop registered
- [ 21.283500] io scheduler deadline registered
- [ 21.283556] io scheduler cfq registered (default)
- [ 21.288485] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438
- [ 21.288837] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56
- [ 21.293370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 21.297202] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
- [ 21.298328] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
- [ 22.195658] console [ttyO2] enabled
- [ 22.200346] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137, base_baud = 3000000) is a OMAP UART4
- [ 22.224514] brd: module loaded
- [ 22.235578] loop: module loaded
- [ 22.242167] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 22.256748] mousedev: PS/2 mouse device common for all mice
- [ 22.265363] i2c /dev entries driver
- [ 22.269186] Driver for 1-wire Dallas network protocol.
- [ 22.275489] platform 4a0021e0.bandgap: Driver ti-soc-thermal requests probe deferral
- [ 22.285573] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 22.295785] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
- [ 22.303417] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
- [ 22.311043] omap_hsmmc 4809c000.mmc: vmmc regulator missing
- [ 22.316992] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
- [ 22.324306] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
- [ 22.331717] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
- [ 22.339258] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
- [ 22.346858] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
- [ 22.354710] omap_hsmmc 480b4000.mmc: pins are not configured from the driver
- [ 22.368117] omap_hwmod: gpio5: _wait_target_disable failed
- [ 22.409559] omap-dma-engine 4a056000.dma-controller: allocating channel for 78
- [ 22.417300] omap-dma-engine 4a056000.dma-controller: allocating channel for 77
- [ 22.425028] omap_hsmmc 480ad000.mmc: vmmc regulator missing
- [ 22.430903] omap-dma-engine 4a056000.dma-controller: freeing channel for 77
- [ 22.438235] omap-dma-engine 4a056000.dma-controller: freeing channel for 78
- [ 22.447772] ledtrig-cpu: registered to indicate activity on CPUs
- [ 22.459792] oprofile: no performance counters
- [ 22.465104] oprofile: using timer interrupt.
- [ 22.469903] TCP: cubic registered
- [ 22.473375] Initializing XFRM netlink socket
- [ 22.477893] NET: Registered protocol family 17
- [ 22.482600] NET: Registered protocol family 15
- [ 22.487447] Key type dns_resolver registered
- [ 22.491992] mux: Failed to setup hwmod io irq -22
- [ 22.497292] cpu cpu0: cpu0 regulator not ready, retry
- [ 22.502661] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral
- [ 22.510479] Power Management for TI OMAP4+ devices.
- [ 22.515775] ThumbEE CPU extension supported.
- [ 22.516974] mmc0: new high speed MMC card at address 0001
- [ 22.526925] mmcblk0: mmc0:0001 SEM08G 7.39 GiB
- [ 22.532148] mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB
- [ 22.538825] mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB
- [ 22.549712] palmas 0-0048: Irq flag is 0x00000000
- [ 22.557457] Alternate GPT is invalid, using primary GPT.
- [ 22.563152] mmcblk0: p1 p2 p3 p4 p5 p6 p7
- [ 22.569981] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0
- [ 22.575938] mmcblk0boot1: unknown partition table
- [ 22.583355] mmcblk0boot0: unknown partition table
- [ 22.632079] smps123: 600 <--> 1500 mV at 1060 mV
- [ 22.639206] smps45: 600 <--> 1310 mV at 1030 mV
- [ 22.646707] smps6: 1200 mV
- [ 22.651796] smps7: 1800 mV
- [ 22.656821] smps8: 600 <--> 1310 mV at 1040 mV
- [ 22.663695] smps9: 2100 mV
- [ 22.668312] smps10_out2: 5000 mV
- [ 22.673265] smps10_out1: 5000 mV
- [ 22.677631] ldo1: 1500 <--> 1800 mV
- [ 22.682929] ldo2: 2800 mV
- [ 22.687360] ldo3: 1500 mV
- [ 22.691448] ldo4: 1500 <--> 1800 mV
- [ 22.696780] ldo5: 1800 mV
- [ 22.701239] ldo6: 1200 mV
- [ 22.705612] ldo7: 2000 mV
- [ 22.710127] ldo8: 3000 mV
- [ 22.714339] ldo9: 1800 <--> 3000 mV at 3000 mV
- [ 22.720803] ldoln: 1800 mV
- [ 22.725389] ldousb: 3250 mV
- [ 22.729461] REGEN1: no parameters
- [ 22.733530] REGEN2: no parameters
- [ 22.737666] regen3: no parameters
- [ 22.741952] SYSEN1: no parameters
- [ 22.745884] SYSEN2: no parameters
- [ 22.749628] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
- [ 22.757353] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
- [ 22.763665] platform 4a0021e0.bandgap: Driver ti-soc-thermal requests probe deferral
- [ 22.772400] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
- [ 22.780151] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
- [ 22.838009] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 22.859740] Waiting for root device /dev/mmcblk1p2...
- [ 22.865341] mmc1: host does not support reading read-only switch. assuming write-enable.
- [ 22.876114] mmc1: new high speed SDHC card at address 0007
- [ 22.882592] mmcblk1: mmc1:0007 SD04G 3.72 GiB
- [ 22.889313] mmcblk1: p1 p2
- [ 25.765726] EXT4-fs (mmcblk1p2): recovery complete
- [ 25.777907] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 25.786781] VFS: Mounted root (ext4 filesystem) on device 179:26.
- [ 25.806183] devtmpfs: mounted
- [ 25.810089] Freeing unused kernel memory: 404K (c0743000 - c07a8000)
- Mounting proc : OK
- Mounting sysfs : OK
- Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
- boot mounted: OK
- ln: /dev/tty-bd: File exists
- /dev/ttyO2
- no_console_suspend linked to /dev/tty-bd - using as console
- ******************************************
- Starting System Init for GenericOMAP5(FlattenedDeviceTree)
- Release: X.x
- Kernel: Linux GenericOMAP5(FlattenedDeviceTree) 3.12.0-rc6-00701-g61cf767 #33 SMP Thu Oct 24 08:50:38 CDT 2013 armv7l GNU/Linux
- ******************************************
- Saving kernel ring buffer : OK
- Mounting devpts : OK
- Setting up networking
- Configuring lo : OK
- Starting syslogd : OK
- Starting klogd : OK
- Mounting filesystems : OK
- mount: mounting none on /proc/bus/usb/ failed: No such file or directory
- Please press Enter to activate this console. \
- / $ echo enabled > /sys/devices/44000000.ocp/48020000.serial/tty/ttyO2/power/wakeup
- / $
- / $ echo -n mem>/sys/power/state
- [ 249.011397] PM: Syncing filesystems ... done.
- [ 251.741762] Freezing user space processes ... (elapsed 0.002 seconds) done.
- [ 251.751900] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 251.787341] PM: suspend of devices complete after 20.497 msecs
- [ 251.798950] PM: late suspend of devices complete after 5.278 msecs
- [ 251.811602] PM: noirq suspend of devices complete after 5.963 msecs
- [ 251.818474] Disabling non-boot CPUs ...
- [ 251.829336] CPU1: shutdown
- [ 251.836785] cpufreq_cpu0: failed to scale voltage up: -13
- [ 253.124929] Powerdomain (core_pwrdm) didn't enter target state 1
- [ 253.131415] Powerdomain (emu_pwrdm) didn't enter target state 1
- [ 253.137807] Powerdomain (l3init_pwrdm) didn't enter target state 1
- [ 253.144464] Could not enter target state in pm_suspend
- [ 253.149980] A possible cause could be an old bootloader - try u-boot >= v2012.07
- [ 253.158724] Enabling non-boot CPUs ...
- [ 253.165598] CPU1: Booted secondary processor
- [ 253.166181] cpufreq_cpu0: failed to scale voltage up: -13
- [ 253.179029] cpufreq_cpu0: failed to scale voltage up: -13
- [ 253.185288] cpufreq_cpu0: failed to scale voltage up: -13
- [ 253.191223] CPU1 is up
- [ 253.196815] PM: noirq resume of devices complete after 3.055 msecs
- [ 253.208633] PM: early resume of devices complete after 3.744 msecs
- [ 253.372009] PM: resume of devices complete after 157.450 msecs
- [ 253.385095] Restarting tasks ... done.
- / $
- / $
- Skipping tty reset...
- Thanks for using picocom
- picocom v1.4
- port is : /dev/ttyUSB0
- flowcontrol : none
- baudrate is : 115200
- parity is : none
- databits are : 8
- escape is : C-a
- noinit is : yes
- noreset is : yes
- nolock is : yes
- send_cmd is : ascii_xfr -s -v -l10
- receive_cmd is : rz -vv
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement