Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] Disabled fast string operations
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f79ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000003f7a0000-0x000000003f7adfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000003f7ae000-0x000000003f7effff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000003f7f0000-0x000000003f7fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: ASUSTeK Computer INC. 1005HA/1005HA, BIOS 0505 06/12/2009
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask 0C0000000 write-back
- [ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
- [ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
- [ 0.000000] total RAM covered: 1016M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
- [ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
- [ 0.000000] [mem 0x00000000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x379fffff] page 2M
- [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
- [ 0.000000] RAMDISK: [mem 0x3e787000-0x3f79ffff]
- [ 0.000000] Allocated new RAMDISK: [mem 0x36be5000-0x37bfdeff]
- [ 0.000000] Move RAMDISK from [mem 0x3e787000-0x3f79feff] to [mem 0x36be5000-0x37bfdeff]
- [ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 06000912 MSFT 00000097)
- [ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 06000912 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 3f7a0430 06A52 (v01 A1311 A1311000 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 3f7ae000 00040
- [ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 06000912 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 06000912 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 06000912 MSFT 00000097)
- [ 0.000000] ACPI: HPET 3f7a6e90 00038 (v01 A_M_I_ OEMHPET 06000912 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 123MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
- [ 0.000000] HighMem [mem 0x37bfe000-0x3f79ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x3f79ffff]
- [ 0.000000] On node 0 totalpages: 259887
- [ 0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f63f4200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1752 pages used for memmap
- [ 0.000000] Normal zone: 222502 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 248 pages used for memmap
- [ 0.000000] HighMem zone: 31402 pages, LIFO batch:7
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
- [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
- [ 0.000000] e820: [mem 0x3f800000-0xfedfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f63d2000 s34176 r0 d23168 u57344
- [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
- [ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 2079872 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003f7a0)
- [ 0.000000] Memory: 1001356k/1040000k available (5956k kernel code, 38192k reserved, 2928k data, 756k init, 126600k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
- [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- [ 0.000000] .init : 0xc18ae000 - 0xc196b000 ( 756 kB)
- [ 0.000000] .data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc15d1358 (5956 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1599.806 MHz processor.
- [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.61 BogoMIPS (lpj=6399224)
- [ 0.004013] pid_max: default: 32768 minimum: 301
- [ 0.004071] Security Framework initialized
- [ 0.004108] AppArmor: AppArmor initialized
- [ 0.004112] Yama: becoming mindful.
- [ 0.004230] Mount-cache hash table entries: 512
- [ 0.004658] Initializing cgroup subsys cpuacct
- [ 0.004665] Initializing cgroup subsys memory
- [ 0.004684] Initializing cgroup subsys devices
- [ 0.004689] Initializing cgroup subsys freezer
- [ 0.004693] Initializing cgroup subsys blkio
- [ 0.004698] Initializing cgroup subsys perf_event
- [ 0.004753] Disabled fast string operations
- [ 0.004763] CPU: Physical Processor ID: 0
- [ 0.004767] CPU: Processor Core ID: 0
- [ 0.004772] mce: CPU supports 5 MCE banks
- [ 0.004790] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004796] using mwait in idle threads.
- [ 0.011090] ACPI: Core revision 20120320
- [ 0.024018] ftrace: allocating 24585 entries in 49 pages
- [ 0.044122] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.044561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.086619] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
- [ 0.088004] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
- [ 0.088004] ... version: 3
- [ 0.088004] ... bit width: 40
- [ 0.088004] ... generic registers: 2
- [ 0.088004] ... value mask: 000000ffffffffff
- [ 0.088004] ... max period: 000000007fffffff
- [ 0.088004] ... fixed-purpose events: 3
- [ 0.088004] ... event mask: 0000000700000003
- [ 0.088004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.088004] CPU 1 irqstacks, hard=f5ce2000 soft=f5ce4000
- [ 0.088004] Booting Node 0, Processors #1 Ok.
- [ 0.008000] Initializing CPU#1
- [ 0.008000] Disabled fast string operations
- [ 0.096159] Brought up 2 CPUs
- [ 0.096175] Total of 2 processors activated (6399.22 BogoMIPS).
- [ 0.100564] devtmpfs: initialized
- [ 0.100564] EVM: security.selinux
- [ 0.100564] EVM: security.SMACK64
- [ 0.100564] EVM: security.capability
- [ 0.100564] PM: Registering ACPI NVS region [mem 0x3f7ae000-0x3f7effff] (270336 bytes)
- [ 0.100882] dummy:
- [ 0.100945] RTC time: 8:32:45, date: 11/04/12
- [ 0.101041] NET: Registered protocol family 16
- [ 0.104212] Trying to unpack rootfs image as initramfs...
- [ 0.104015] EISA bus registered
- [ 0.104015] ACPI: bus type pci registered
- [ 0.104015] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
- [ 0.104015] PCI: not using MMCONFIG
- [ 0.104015] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
- [ 0.104015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
- [ 0.104015] PCI: Using configuration type 1 for base access
- [ 0.961999] bio: create slab <bio-0> at 0
- [ 0.962405] ACPI: Added _OSI(Module Device)
- [ 0.962405] ACPI: Added _OSI(Processor Device)
- [ 0.962405] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.962405] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.963840] ACPI: EC: Look up EC in DSDT
- [ 0.969166] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.980132] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.981409] ACPI: Dynamic OEM Table Load:
- [ 0.981420] ACPI: SSDT (null) 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.981989] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.983203] ACPI: Dynamic OEM Table Load:
- [ 0.983213] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.984035] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.985293] ACPI: Dynamic OEM Table Load:
- [ 0.985304] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.985641] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.986846] ACPI: Dynamic OEM Table Load:
- [ 0.986856] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.987988] ACPI: Interpreter enabled
- [ 0.988015] ACPI: (supports S0 S3 S4 S5)
- [ 0.988094] ACPI: Using IOAPIC for interrupt routing
- [ 0.988178] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
- [ 0.989818] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
- [ 0.989825] PCI: Using MMCONFIG for extended config space
- [ 1.007614] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
- [ 1.008180] ACPI: No dock devices found.
- [ 1.008198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.008454] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 1.008855] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
- [ 1.008866] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
- [ 1.008876] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
- [ 1.008885] pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000dffff]
- [ 1.008894] pci_root PNP0A08:00: >host bridge window [mem 0x3f800000-0xffffffff]
- [ 1.009035] PCI host bridge to bus 0000:00
- [ 1.009046] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
- [ 1.009055] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
- [ 1.009064] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
- [ 1.009073] pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000dffff]
- [ 1.009083] pci_bus 0000:00: >root bus resource [mem 0x3f800000-0xffffffff]
- [ 1.009114] pci 0000:00:00.0: >[8086:27ac] type 00 class 0x060000
- [ 1.009212] pci 0000:00:02.0: >[8086:27ae] type 00 class 0x030000
- [ 1.009238] pci 0000:00:02.0: >reg 10: [mem 0xf7e00000-0xf7e7ffff]
- [ 1.009254] pci 0000:00:02.0: >reg 14: [io 0xdc00-0xdc07]
- [ 1.009270] pci 0000:00:02.0: >reg 18: [mem 0xd0000000-0xdfffffff pref]
- [ 1.009286] pci 0000:00:02.0: >reg 1c: [mem 0xf7dc0000-0xf7dfffff]
- [ 1.009369] pci 0000:00:02.1: >[8086:27a6] type 00 class 0x038000
- [ 1.009392] pci 0000:00:02.1: >reg 10: [mem 0xf7e80000-0xf7efffff]
- [ 1.009562] pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
- [ 1.009602] pci 0000:00:1b.0: >reg 10: [mem 0xf7db8000-0xf7dbbfff 64bit]
- [ 1.009750] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
- [ 1.009810] pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
- [ 1.009966] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
- [ 1.010029] pci 0000:00:1c.1: >[8086:27d2] type 01 class 0x060400
- [ 1.010184] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
- [ 1.010249] pci 0000:00:1c.3: >[8086:27d6] type 01 class 0x060400
- [ 1.010405] pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
- [ 1.010468] pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
- [ 1.010551] pci 0000:00:1d.0: >reg 20: [io 0xd400-0xd41f]
- [ 1.010628] pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
- [ 1.010711] pci 0000:00:1d.1: >reg 20: [io 0xd480-0xd49f]
- [ 1.010786] pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
- [ 1.010869] pci 0000:00:1d.2: >reg 20: [io 0xd800-0xd81f]
- [ 1.010944] pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
- [ 1.011026] pci 0000:00:1d.3: >reg 20: [io 0xd880-0xd89f]
- [ 1.011118] pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
- [ 1.011158] pci 0000:00:1d.7: >reg 10: [mem 0xf7db7c00-0xf7db7fff]
- [ 1.011308] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
- [ 1.011357] pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
- [ 1.011508] pci 0000:00:1f.0: >[8086:27b9] type 00 class 0x060100
- [ 1.011653] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
- [ 1.011664] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
- [ 1.011675] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
- [ 1.011759] pci 0000:00:1f.1: >[8086:27df] type 00 class 0x01018a
- [ 1.011789] pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007]
- [ 1.011812] pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003]
- [ 1.011834] pci 0000:00:1f.1: >reg 18: [io 0x08f0-0x08f7]
- [ 1.011857] pci 0000:00:1f.1: >reg 1c: [io 0x08f8-0x08fb]
- [ 1.011878] pci 0000:00:1f.1: >reg 20: [io 0xffa0-0xffaf]
- [ 1.011966] pci 0000:00:1f.2: >[8086:27c5] type 00 class 0x010601
- [ 1.012005] pci 0000:00:1f.2: >reg 10: [io 0xd080-0xd087]
- [ 1.012027] pci 0000:00:1f.2: >reg 14: [io 0xd000-0xd003]
- [ 1.012049] pci 0000:00:1f.2: >reg 18: [io 0xcc00-0xcc07]
- [ 1.012085] pci 0000:00:1f.2: >reg 1c: [io 0xc880-0xc883]
- [ 1.012107] pci 0000:00:1f.2: >reg 20: [io 0xc800-0xc80f]
- [ 1.012130] pci 0000:00:1f.2: >reg 24: [mem 0xf7db7800-0xf7db7bff]
- [ 1.012214] pci 0000:00:1f.2: >PME# supported from D3hot
- [ 1.012335] pci 0000:00:1c.0: >PCI bridge to [bus 04-04]
- [ 1.012478] pci 0000:02:00.0: >[168c:002b] type 00 class 0x028000
- [ 1.012525] pci 0000:02:00.0: >reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
- [ 1.012710] pci 0000:02:00.0: >supports D1
- [ 1.012719] pci 0000:02:00.0: >PME# supported from D0 D1 D3hot D3cold
- [ 1.024116] pci 0000:00:1c.1: >PCI bridge to [bus 02-03]
- [ 1.024139] pci 0000:00:1c.1: > bridge window [mem 0xf8000000-0xfbffffff]
- [ 1.024157] pci 0000:00:1c.1: > bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
- [ 1.024294] pci 0000:01:00.0: >[1969:1062] type 00 class 0x020000
- [ 1.024345] pci 0000:01:00.0: >reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
- [ 1.024372] pci 0000:01:00.0: >reg 18: [io 0xec00-0xec7f]
- [ 1.024557] pci 0000:01:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
- [ 1.036116] pci 0000:00:1c.3: >PCI bridge to [bus 01-01]
- [ 1.036135] pci 0000:00:1c.3: > bridge window [io 0xe000-0xefff]
- [ 1.036149] pci 0000:00:1c.3: > bridge window [mem 0xf7f00000-0xf7ffffff]
- [ 1.036286] pci 0000:00:1e.0: >PCI bridge to [bus 05-05] (subtractive decode)
- [ 1.036312] pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 1.036321] pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 1.036330] pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 1.036339] pci 0000:00:1e.0: > bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 1.036349] pci 0000:00:1e.0: > bridge window [mem 0x3f800000-0xffffffff] (subtractive decode)
- [ 1.036394] pci_bus 0000:00: >on NUMA node 0
- [ 1.036413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 1.036873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
- [ 1.036955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
- [ 1.037135] pci0000:00: >Requesting ACPI _OSC control (0x1d)
- [ 1.037146] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 1.037151] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 1.060617] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 1.060804] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 1.060994] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 1.061175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 1.061356] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 1.061540] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 1.061725] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 1.062466] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 1.064066] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 1.064066] vgaarb: loaded
- [ 1.064066] vgaarb: bridge control possible 0000:00:02.0
- [ 1.064066] SCSI subsystem initialized
- [ 1.064084] libata version 3.00 loaded.
- [ 1.064193] ACPI: bus type usb registered
- [ 1.064285] usbcore: registered new interface driver usbfs
- [ 1.064333] usbcore: registered new interface driver hub
- [ 1.064437] usbcore: registered new device driver usb
- [ 1.064856] PCI: Using ACPI for IRQ routing
- [ 1.064940] PCI: pci_cache_line_size set to 64 bytes
- [ 1.065095] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 1.065103] e820: reserve RAM buffer [mem 0x3f7a0000-0x3fffffff]
- [ 1.065470] NetLabel: Initializing
- [ 1.065477] NetLabel: domain hash size = 128
- [ 1.065481] NetLabel: protocols = UNLABELED CIPSOv4
- [ 1.065515] NetLabel: unlabeled traffic allowed by default
- [ 1.065910] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 1.065924] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 1.065940] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 1.728164] Switching to clocksource hpet
- [ 1.755484] AppArmor: AppArmor Filesystem Enabled
- [ 1.755566] pnp: PnP ACPI init
- [ 1.755613] ACPI: bus type pnp registered
- [ 1.755917] pnp 00:00: >[bus 00-ff]
- [ 1.755928] pnp 00:00: >[io 0x0cf8-0x0cff]
- [ 1.755938] pnp 00:00: >[io 0x0000-0x0cf7 window]
- [ 1.755947] pnp 00:00: >[io 0x0d00-0xffff window]
- [ 1.755956] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
- [ 1.755965] pnp 00:00: >[mem 0x000d0000-0x000dffff window]
- [ 1.755974] pnp 00:00: >[mem 0x3f800000-0xffffffff window]
- [ 1.756198] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 1.756241] pnp 00:01: >[mem 0xfed13000-0xfed19fff]
- [ 1.756389] system 00:01: >[mem 0xfed13000-0xfed19fff] has been reserved
- [ 1.756402] system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 1.756472] pnp 00:02: >[dma 4]
- [ 1.756482] pnp 00:02: >[io 0x0000-0x000f]
- [ 1.756490] pnp 00:02: >[io 0x0081-0x0083]
- [ 1.756498] pnp 00:02: >[io 0x0087]
- [ 1.756506] pnp 00:02: >[io 0x0089-0x008b]
- [ 1.756513] pnp 00:02: >[io 0x008f]
- [ 1.756521] pnp 00:02: >[io 0x00c0-0x00df]
- [ 1.756607] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
- [ 1.756652] pnp 00:03: >[io 0x0070-0x0071]
- [ 1.756681] pnp 00:03: >[irq 8]
- [ 1.756768] pnp 00:03: >Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 1.756889] pnp 00:04: >[io 0x0060]
- [ 1.756898] pnp 00:04: >[io 0x0064]
- [ 1.756915] pnp 00:04: >[irq 1]
- [ 1.757014] pnp 00:04: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 1.757147] pnp 00:05: >[irq 12]
- [ 1.757243] pnp 00:05: >Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
- [ 1.757281] pnp 00:06: >[io 0x0061]
- [ 1.757372] pnp 00:06: >Plug and Play ACPI device, IDs PNP0800 (active)
- [ 1.757410] pnp 00:07: >[io 0x00f0-0x00ff]
- [ 1.757428] pnp 00:07: >[irq 13]
- [ 1.757525] pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 1.757929] pnp 00:08: >[io 0x0010-0x001f]
- [ 1.757940] pnp 00:08: >[io 0x0022-0x003f]
- [ 1.757948] pnp 00:08: >[io 0x0044-0x004d]
- [ 1.757956] pnp 00:08: >[io 0x0050-0x005e]
- [ 1.757964] pnp 00:08: >[io 0x0063]
- [ 1.757971] pnp 00:08: >[io 0x0065]
- [ 1.757979] pnp 00:08: >[io 0x0067-0x006f]
- [ 1.757987] pnp 00:08: >[io 0x0072-0x007f]
- [ 1.757995] pnp 00:08: >[io 0x0080]
- [ 1.758002] pnp 00:08: >[io 0x0084-0x0086]
- [ 1.758010] pnp 00:08: >[io 0x0088]
- [ 1.758018] pnp 00:08: >[io 0x008c-0x008e]
- [ 1.758026] pnp 00:08: >[io 0x0090-0x009f]
- [ 1.758033] pnp 00:08: >[io 0x00a2-0x00bf]
- [ 1.758041] pnp 00:08: >[io 0x00e0-0x00ef]
- [ 1.758050] pnp 00:08: >[io 0x025c-0x025f]
- [ 1.758058] pnp 00:08: >[io 0x0380-0x0383]
- [ 1.758066] pnp 00:08: >[io 0x0400-0x041f]
- [ 1.758074] pnp 00:08: >[io 0x04d0-0x04d1]
- [ 1.758082] pnp 00:08: >[io 0x0800-0x087f]
- [ 1.758090] pnp 00:08: >[io 0x0400-0x03ff disabled]
- [ 1.758098] pnp 00:08: >[io 0x0480-0x04bf]
- [ 1.758107] pnp 00:08: >[mem 0x8c000000-0x8c01ffff]
- [ 1.758116] pnp 00:08: >[mem 0xfed1c000-0xfed1ffff]
- [ 1.758124] pnp 00:08: >[mem 0xfed20000-0xfed3ffff]
- [ 1.758133] pnp 00:08: >[mem 0xfed50000-0xfed8ffff]
- [ 1.758141] pnp 00:08: >[mem 0xffb00000-0xffbfffff]
- [ 1.758150] pnp 00:08: >[mem 0xfff00000-0xffffffff]
- [ 1.758368] system 00:08: >[io 0x025c-0x025f] has been reserved
- [ 1.758380] system 00:08: >[io 0x0380-0x0383] has been reserved
- [ 1.758391] system 00:08: >[io 0x0400-0x041f] has been reserved
- [ 1.758401] system 00:08: >[io 0x04d0-0x04d1] has been reserved
- [ 1.758411] system 00:08: >[io 0x0800-0x087f] has been reserved
- [ 1.758421] system 00:08: >[io 0x0480-0x04bf] has been reserved
- [ 1.758433] system 00:08: >[mem 0x8c000000-0x8c01ffff] has been reserved
- [ 1.758450] system 00:08: >[mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 1.758461] system 00:08: >[mem 0xfed20000-0xfed3ffff] has been reserved
- [ 1.758471] system 00:08: >[mem 0xfed50000-0xfed8ffff] has been reserved
- [ 1.758482] system 00:08: >[mem 0xffb00000-0xffbfffff] has been reserved
- [ 1.758493] system 00:08: >[mem 0xfff00000-0xffffffff] could not be reserved
- [ 1.758505] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.758714] pnp 00:09: >[mem 0xfed00000-0xfed003ff]
- [ 1.758812] pnp 00:09: >Plug and Play ACPI device, IDs PNP0103 (active)
- [ 1.758987] pnp 00:0a: >[mem 0xfec00000-0xfec00fff]
- [ 1.758998] pnp 00:0a: >[mem 0xfee00000-0xfee00fff]
- [ 1.759143] system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved
- [ 1.759155] system 00:0a: >[mem 0xfee00000-0xfee00fff] has been reserved
- [ 1.759167] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.759294] pnp 00:0b: >[mem 0xe0000000-0xe3ffffff]
- [ 1.759448] system 00:0b: >[mem 0xe0000000-0xe3ffffff] has been reserved
- [ 1.759461] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.760192] pnp 00:0c: >[mem 0x00000000-0x0009ffff]
- [ 1.760203] pnp 00:0c: >[mem 0x000c0000-0x000cffff]
- [ 1.760211] pnp 00:0c: >[mem 0x000e0000-0x000fffff]
- [ 1.760220] pnp 00:0c: >[mem 0x00100000-0x3f7fffff]
- [ 1.760229] pnp 00:0c: >[mem 0x00000000-0xffffffffffffffff disabled]
- [ 1.760421] system 00:0c: >[mem 0x00000000-0x0009ffff] could not be reserved
- [ 1.760434] system 00:0c: >[mem 0x000c0000-0x000cffff] could not be reserved
- [ 1.760444] system 00:0c: >[mem 0x000e0000-0x000fffff] could not be reserved
- [ 1.760455] system 00:0c: >[mem 0x00100000-0x3f7fffff] could not be reserved
- [ 1.760467] system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 1.760992] pnp: PnP ACPI: found 13 devices
- [ 1.760999] ACPI: ACPI bus type pnp unregistered
- [ 1.761008] PnPBIOS: Disabled by ACPI PNP
- [ 1.802504] pci 0000:00:1c.0: >bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
- [ 1.802523] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
- [ 1.802535] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
- [ 1.802559] pci 0000:00:1c.1: >bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
- [ 1.802584] pci 0000:00:1c.3: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
- [ 1.802618] pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- [ 1.802629] pci 0000:00:1c.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 1.802640] pci 0000:00:1c.3: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 1.802649] pci 0000:00:1c.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 1.802659] pci 0000:00:1c.1: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 1.802677] pci 0000:00:1c.0: >BAR 14: assigned [mem 0x3f800000-0x3f9fffff]
- [ 1.802690] pci 0000:00:1c.0: >BAR 15: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
- [ 1.802703] pci 0000:00:1c.3: >BAR 15: assigned [mem 0x3fc00000-0x3fdfffff 64bit pref]
- [ 1.802718] pci 0000:00:1c.0: >BAR 13: assigned [io 0x1000-0x1fff]
- [ 1.802731] pci 0000:00:1c.1: >BAR 13: assigned [io 0x2000-0x2fff]
- [ 1.802743] pci 0000:00:1c.0: >PCI bridge to [bus 04-04]
- [ 1.802754] pci 0000:00:1c.0: > bridge window [io 0x1000-0x1fff]
- [ 1.802769] pci 0000:00:1c.0: > bridge window [mem 0x3f800000-0x3f9fffff]
- [ 1.802783] pci 0000:00:1c.0: > bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
- [ 1.802799] pci 0000:00:1c.1: >PCI bridge to [bus 02-03]
- [ 1.802809] pci 0000:00:1c.1: > bridge window [io 0x2000-0x2fff]
- [ 1.802824] pci 0000:00:1c.1: > bridge window [mem 0xf8000000-0xfbffffff]
- [ 1.802837] pci 0000:00:1c.1: > bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
- [ 1.802853] pci 0000:00:1c.3: >PCI bridge to [bus 01-01]
- [ 1.802864] pci 0000:00:1c.3: > bridge window [io 0xe000-0xefff]
- [ 1.802878] pci 0000:00:1c.3: > bridge window [mem 0xf7f00000-0xf7ffffff]
- [ 1.802891] pci 0000:00:1c.3: > bridge window [mem 0x3fc00000-0x3fdfffff 64bit pref]
- [ 1.802907] pci 0000:00:1e.0: >PCI bridge to [bus 05-05]
- [ 1.802944] pci 0000:00:1c.0: >enabling device (0104 -> 0107)
- [ 1.802995] pci 0000:00:1c.1: >enabling device (0106 -> 0107)
- [ 1.803053] pci 0000:00:1e.0: >setting latency timer to 64
- [ 1.803066] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
- [ 1.803075] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
- [ 1.803084] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
- [ 1.803093] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000dffff]
- [ 1.803102] pci_bus 0000:00: >resource 8 [mem 0x3f800000-0xffffffff]
- [ 1.803111] pci_bus 0000:04: >resource 0 [io 0x1000-0x1fff]
- [ 1.803120] pci_bus 0000:04: >resource 1 [mem 0x3f800000-0x3f9fffff]
- [ 1.803130] pci_bus 0000:04: >resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
- [ 1.803139] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
- [ 1.803148] pci_bus 0000:02: >resource 1 [mem 0xf8000000-0xfbffffff]
- [ 1.803157] pci_bus 0000:02: >resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
- [ 1.803166] pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
- [ 1.803175] pci_bus 0000:01: >resource 1 [mem 0xf7f00000-0xf7ffffff]
- [ 1.803184] pci_bus 0000:01: >resource 2 [mem 0x3fc00000-0x3fdfffff 64bit pref]
- [ 1.803194] pci_bus 0000:05: >resource 4 [io 0x0000-0x0cf7]
- [ 1.803202] pci_bus 0000:05: >resource 5 [io 0x0d00-0xffff]
- [ 1.803211] pci_bus 0000:05: >resource 6 [mem 0x000a0000-0x000bffff]
- [ 1.803220] pci_bus 0000:05: >resource 7 [mem 0x000d0000-0x000dffff]
- [ 1.803229] pci_bus 0000:05: >resource 8 [mem 0x3f800000-0xffffffff]
- [ 1.803341] NET: Registered protocol family 2
- [ 1.803520] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 1.804167] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 1.805341] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.805945] TCP: Hash tables configured (established 131072 bind 65536)
- [ 1.805954] TCP: reno registered
- [ 1.805967] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.805992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.806219] NET: Registered protocol family 1
- [ 1.806275] pci 0000:00:02.0: >Boot video device
- [ 1.806604] PCI: CLS 32 bytes, default 64
- [ 1.808069] audit: initializing netlink socket (disabled)
- [ 1.808102] type=2000 audit(1352017965.804:1): initialized
- [ 1.869112] highmem bounce pool size: 64 pages
- [ 1.869155] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.875439] VFS: Disk quotas dquot_6.5.2
- [ 1.875633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.877738] fuse init (API version 7.19)
- [ 1.878080] msgmni has been set to 1708
- [ 1.879155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.879248] io scheduler noop registered
- [ 1.879255] io scheduler deadline registered (default)
- [ 1.879278] io scheduler cfq registered
- [ 1.879733] pcieport 0000:00:1c.0: >irq 40 for MSI/MSI-X
- [ 1.879990] pcieport 0000:00:1c.1: >irq 41 for MSI/MSI-X
- [ 1.880271] pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
- [ 1.880530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.880631] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.880858] intel_idle: MWAIT substates: 0x20220
- [ 1.880874] intel_idle: v0.4 model 0x1C
- [ 1.880879] intel_idle: lapic_timer_reliable_states 0x2
- [ 1.880886] Marking TSC unstable due to TSC halts in idle states deeper than C2
- [ 1.881167] ACPI: AC Adapter [AC0] (off-line)
- [ 1.881403] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 1.886137] ACPI: Lid Switch [LID]
- [ 1.886317] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
- [ 1.886330] ACPI: Sleep Button [SLPB]
- [ 1.886483] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- [ 1.886494] ACPI: Power Button [PWRB]
- [ 1.886645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 1.886657] ACPI: Power Button [PWRF]
- [ 1.886908] ACPI: Requesting acpi_cpufreq
- [ 9.390297] Freeing initrd memory: 16484k freed
- [ 9.424895] thermal LNXTHERM:00: >registered as thermal_zone0
- [ 9.424903] ACPI: Thermal Zone [TZ00] (62 C)
- [ 9.424964] ACPI: Battery Slot [BAT0] (battery present)
- [ 9.425062] GHES: HEST is not enabled!
- [ 9.425381] isapnp: Scanning for PnP cards...
- [ 9.428118] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 9.432373] Linux agpgart interface v0.103
- [ 9.432557] agpgart-intel 0000:00:00.0: >Intel 945GME Chipset
- [ 9.432673] agpgart-intel 0000:00:00.0: >detected gtt size: 262144K total, 262144K mappable
- [ 9.432821] agpgart-intel 0000:00:00.0: >detected 8192K stolen memory
- [ 9.433083] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xd0000000
- [ 9.438296] brd: module loaded
- [ 9.440892] loop: module loaded
- [ 9.441343] ahci 0000:00:1f.2: >version 3.0
- [ 9.441474] ahci 0000:00:1f.2: >irq 43 for MSI/MSI-X
- [ 9.441628] ahci 0000:00:1f.2: >AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
- [ 9.441639] ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part
- [ 9.441651] ahci 0000:00:1f.2: >setting latency timer to 64
- [ 9.443388] scsi0 : ahci
- [ 9.443654] scsi1 : ahci
- [ 9.443856] scsi2 : ahci
- [ 9.444104] scsi3 : ahci
- [ 9.444729] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 43
- [ 9.444736] ata2: DUMMY
- [ 9.444743] ata3: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7a00 irq 43
- [ 9.444748] ata4: DUMMY
- [ 9.444862] ata_piix 0000:00:1f.1: >version 2.13
- [ 9.444970] ata_piix 0000:00:1f.1: >setting latency timer to 64
- [ 9.445911] scsi4 : ata_piix
- [ 9.446102] scsi5 : ata_piix
- [ 9.449229] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 9.449238] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 9.450521] Fixed MDIO Bus: probed
- [ 9.450737] tun: Universal TUN/TAP device driver, 1.6
- [ 9.450742] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 9.450902] PPP generic driver version 2.4.2
- [ 9.451037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 9.451150] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
- [ 9.451161] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
- [ 9.451183] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
- [ 9.451236] ehci_hcd 0000:00:1d.7: >using broken periodic workaround
- [ 9.451257] ehci_hcd 0000:00:1d.7: >debug port 1
- [ 9.455142] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported
- [ 9.455187] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xf7db7c00
- [ 9.455820] ata6: port disabled--ignoring
- [ 9.464052] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
- [ 9.464113] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
- [ 9.464122] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.464130] usb usb1: >Product: EHCI Host Controller
- [ 9.464137] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
- [ 9.464144] usb usb1: >SerialNumber: 0000:00:1d.7
- [ 9.464512] hub 1-0:1.0: >USB hub found
- [ 9.464528] hub 1-0:1.0: >8 ports detected
- [ 9.464758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 9.464834] uhci_hcd: USB Universal Host Controller Interface driver
- [ 9.464901] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
- [ 9.464911] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
- [ 9.464927] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
- [ 9.464982] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000d400
- [ 9.465086] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.465094] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.465102] usb usb2: >Product: UHCI Host Controller
- [ 9.465110] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
- [ 9.465117] usb usb2: >SerialNumber: 0000:00:1d.0
- [ 9.465479] hub 2-0:1.0: >USB hub found
- [ 9.465494] hub 2-0:1.0: >2 ports detected
- [ 9.465681] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
- [ 9.465691] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
- [ 9.465707] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
- [ 9.465776] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000d480
- [ 9.465876] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.465885] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.465892] usb usb3: >Product: UHCI Host Controller
- [ 9.465900] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
- [ 9.465907] usb usb3: >SerialNumber: 0000:00:1d.1
- [ 9.466206] hub 3-0:1.0: >USB hub found
- [ 9.466221] hub 3-0:1.0: >2 ports detected
- [ 9.466411] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
- [ 9.466421] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
- [ 9.466441] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
- [ 9.466509] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000d800
- [ 9.466612] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.466620] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.466628] usb usb4: >Product: UHCI Host Controller
- [ 9.466635] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
- [ 9.466642] usb usb4: >SerialNumber: 0000:00:1d.2
- [ 9.466926] hub 4-0:1.0: >USB hub found
- [ 9.466941] hub 4-0:1.0: >2 ports detected
- [ 9.467111] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
- [ 9.467121] uhci_hcd 0000:00:1d.3: >UHCI Host Controller
- [ 9.467136] uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
- [ 9.467203] uhci_hcd 0000:00:1d.3: >irq 16, io base 0x0000d880
- [ 9.467311] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.467320] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.467327] usb usb5: >Product: UHCI Host Controller
- [ 9.467335] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
- [ 9.467342] usb usb5: >SerialNumber: 0000:00:1d.3
- [ 9.467621] hub 5-0:1.0: >USB hub found
- [ 9.467635] hub 5-0:1.0: >2 ports detected
- [ 9.467999] usbcore: registered new interface driver libusual
- [ 9.468213] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 9.490996] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 9.491015] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 9.491394] mousedev: PS/2 mouse device common for all mice
- [ 9.494833] rtc_cmos 00:03: >RTC can wake from S4
- [ 9.495088] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0
- [ 9.495142] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 9.495309] device-mapper: uevent: version 1.0.3
- [ 9.495513] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 9.495625] EISA: Probing bus 0 at eisa.0
- [ 9.495633] EISA: Cannot allocate resource for mainboard
- [ 9.495640] Cannot allocate resource for EISA slot 1
- [ 9.495647] Cannot allocate resource for EISA slot 2
- [ 9.495653] Cannot allocate resource for EISA slot 3
- [ 9.495660] Cannot allocate resource for EISA slot 4
- [ 9.495666] Cannot allocate resource for EISA slot 5
- [ 9.495672] Cannot allocate resource for EISA slot 6
- [ 9.495679] Cannot allocate resource for EISA slot 7
- [ 9.495685] Cannot allocate resource for EISA slot 8
- [ 9.495690] EISA: Detected 0 cards.
- [ 9.495829] cpuidle: using governor ladder
- [ 9.495992] cpuidle: using governor menu
- [ 9.495998] EFI Variables Facility v0.08 2004-May-17
- [ 9.496728] ashmem: initialized
- [ 9.497093] TCP: cubic registered
- [ 9.497454] NET: Registered protocol family 10
- [ 9.497960] NET: Registered protocol family 17
- [ 9.497991] Key type dns_resolver registered
- [ 9.498258] Using IPI No-Shortcut mode
- [ 9.498583] PM: Hibernation image not present or could not be loaded.
- [ 9.498613] registered taskstats version 1
- [ 9.505582] Key type trusted registered
- [ 9.512132] Key type encrypted registered
- [ 9.519640] Magic number: 4:654:522
- [ 9.519819] rtc_cmos 00:03: >setting system clock to 2012-11-04 08:32:54 UTC (1352017974)
- [ 9.520786] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 9.520792] EDD information not available.
- [ 9.540698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 9.616371] ACPI: Battery Slot [BAT0] (battery present)
- [ 9.772076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 9.772122] ata3: SATA link down (SStatus 0 SControl 300)
- [ 9.773197] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 9.773601] ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
- [ 9.773611] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 9.774883] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 9.775280] ata1.00: configured for UDMA/133
- [ 9.779719] isapnp: No Plug & Play device found
- [ 9.780056] scsi 0:0:0:0: >Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
- [ 9.780064] usb 1-2: >new high-speed USB device number 2 using ehci_hcd
- [ 9.780398] sd 0:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 9.780505] sd 0:0:0:0: >Attached scsi generic sg0 type 0
- [ 9.780587] sd 0:0:0:0: >[sda] Write Protect is off
- [ 9.780616] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
- [ 9.780714] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 9.948423] usb 1-2: >New USB device found, idVendor=13d3, idProduct=5108
- [ 9.948442] usb 1-2: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 9.948454] usb 1-2: >Product: USB 2.0 Camera
- [ 9.948466] usb 1-2: >Manufacturer: Sonix Technology Co., Ltd.
- [ 9.948476] usb 1-2: >SerialNumber: SN0001
- [ 10.060143] usb 1-3: >new high-speed USB device number 3 using ehci_hcd
- [ 10.166040] sda: sda1 sda2 < sda5 >
- [ 10.167078] sd 0:0:0:0: >[sda] Attached SCSI disk
- [ 10.167249] Freeing unused kernel memory: 756k freed
- [ 10.167881] Write protecting the kernel text: 5960k
- [ 10.167929] Write protecting the kernel read-only data: 2424k
- [ 10.167934] NX-protecting the kernel data: 4280k
- [ 10.193755] usb 1-3: >New USB device found, idVendor=058f, idProduct=6335
- [ 10.193770] usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 10.193779] usb 1-3: >Product: Mass Storage Device
- [ 10.193787] usb 1-3: >Manufacturer: Generic
- [ 10.193795] usb 1-3: >SerialNumber: 058F63356336
- [ 10.199545] Initializing USB Mass Storage driver...
- [ 10.199940] scsi6 : usb-storage 1-3:1.0
- [ 10.200246] usbcore: registered new interface driver usb-storage
- [ 10.200252] USB Mass Storage support registered.
- [ 10.220379] udevd[111]: starting version 175
- [ 10.304104] usb 1-5: >new high-speed USB device number 4 using ehci_hcd
- [ 10.406838] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 10.407051] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 10.516123] usb 1-5: >New USB device found, idVendor=058f, idProduct=6387
- [ 10.516137] usb 1-5: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 10.516146] usb 1-5: >Product: DT 101 G2
- [ 10.516155] usb 1-5: >Manufacturer: Kingston
- [ 10.516163] usb 1-5: >SerialNumber: 11BD7AB6
- [ 10.518828] scsi7 : usb-storage 1-5:1.0
- [ 10.556814] [drm] Initialized drm 1.1.0 20060810
- [ 10.600944] atl1c 0000:01:00.0: >version 1.0.1.0-NAPI
- [ 10.601510] i915 0000:00:02.0: >setting latency timer to 64
- [ 10.602211] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 10.602219] [drm] Driver supports precise vblank timestamp query.
- [ 10.602876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 10.752117] composite sync not supported
- [ 11.027000] [drm] initialized overlay support
- [ 11.027052] composite sync not supported
- [ 11.045680] fbcon: inteldrmfb (fb0) is primary device
- [ 11.201388] scsi 6:0:0:0: >Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
- [ 11.203447] sd 6:0:0:0: >Attached scsi generic sg1 type 0
- [ 11.427662] Console: switching to colour frame buffer device 128x37
- [ 11.435082] fb0: inteldrmfb frame buffer device
- [ 11.435085] drm: registered panic notifier
- [ 11.435103] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 11.518633] scsi 7:0:0:0: >Direct-Access Kingston DT 101 G2 8.07 PQ: 0 ANSI: 2
- [ 11.520794] sd 7:0:0:0: >Attached scsi generic sg2 type 0
- [ 11.523497] sd 7:0:0:0: >[sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
- [ 11.524141] sd 7:0:0:0: >[sdc] Write Protect is off
- [ 11.524154] sd 7:0:0:0: >[sdc] Mode Sense: 03 00 00 00
- [ 11.524747] sd 7:0:0:0: >[sdc] No Caching mode page present
- [ 11.524759] sd 7:0:0:0: >[sdc] Assuming drive cache: write through
- [ 11.527992] sd 7:0:0:0: >[sdc] No Caching mode page present
- [ 11.528052] sd 7:0:0:0: >[sdc] Assuming drive cache: write through
- [ 11.612323] sdc: sdc1
- [ 11.615112] sd 7:0:0:0: >[sdc] No Caching mode page present
- [ 11.615122] sd 7:0:0:0: >[sdc] Assuming drive cache: write through
- [ 11.615130] sd 7:0:0:0: >[sdc] Attached SCSI removable disk
- [ 12.082017] sd 6:0:0:0: >[sdb] 250116096 512-byte logical blocks: (128 GB/119 GiB)
- [ 12.082811] sd 6:0:0:0: >[sdb] Write Protect is off
- [ 12.082820] sd 6:0:0:0: >[sdb] Mode Sense: 03 00 00 00
- [ 12.083610] sd 6:0:0:0: >[sdb] No Caching mode page present
- [ 12.083624] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
- [ 12.087068] sd 6:0:0:0: >[sdb] No Caching mode page present
- [ 12.087078] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
- [ 12.089746] sdb: sdb1 sdb2
- [ 12.093222] sd 6:0:0:0: >[sdb] No Caching mode page present
- [ 12.093233] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
- [ 12.093241] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
- [ 12.518168] composite sync not supported
- [ 12.725991] xor: automatically using best checksumming function:
- [ 12.764033] pIII_sse : 4859.000 MB/sec
- [ 12.765504] device-mapper: dm-raid45: initialized v0.2594b
- [ 13.030417] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 14.624203] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 37.684783] Adding 2010108k swap on /dev/sdb2. Priority:-1 extents:1 across:2010108k
- [ 38.042182] Adding 2980020k swap on /dev/sda5. Priority:-2 extents:1 across:2980020k
- [ 38.102262] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 38.220638] udevd[1244]: starting version 175
- [ 38.830651] Bluetooth: Core ver 2.16
- [ 38.835612] NET: Registered protocol family 31
- [ 38.835623] Bluetooth: HCI device and connection manager initialized
- [ 38.835631] Bluetooth: HCI socket layer initialized
- [ 38.835638] Bluetooth: L2CAP socket layer initialized
- [ 38.835664] Bluetooth: SCO socket layer initialized
- [ 38.856702] lp: driver loaded but no devices found
- [ 38.888271] ppdev: user-space parallel port driver
- [ 38.908948] Bluetooth: RFCOMM TTY layer initialized
- [ 38.908965] Bluetooth: RFCOMM socket layer initialized
- [ 38.908972] Bluetooth: RFCOMM ver 1.11
- [ 38.944168] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 38.944178] Bluetooth: BNEP filters: protocol multicast
- [ 39.134180] cfg80211: Calling CRDA to update world regulatory domain
- [ 39.162763] eeepc_laptop: Eee PC Hotkey Driver
- [ 39.162776] eeepc_laptop: wlan hotplug disabled
- [ 39.162792] eeepc_laptop: Hotkey init flags 0x41
- [ 39.163371] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
- [ 39.186548] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
- [ 39.193913] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway
- [ 39.193923] eeepc_laptop: Get control methods supported: 0xe101711
- [ 39.215881] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
- [ 39.244414] Registered led device: eeepc::touchpad
- [ 39.547976] intel_rng: FWH not detected
- [ 39.649840] ACPI Warning: 0x00000860-0x0000087f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
- [ 39.649864] ACPI Warning: 0x00000860-0x0000087f SystemIO conflicts with Region \_SB_.PCI0.SBRG.PMS0 2 (20120320/utaddress-251)
- [ 39.649879] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 39.649887] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
- [ 39.649896] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
- [ 39.649910] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.PMS0 2 (20120320/utaddress-251)
- [ 39.649924] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 39.649933] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20120320/utaddress-251)
- [ 39.649948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 39.649953] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 39.733488] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
- [ 39.744230] leds_ss4200: no LED devices found
- [ 40.291483] device-mapper: multipath: version 1.4.0 loaded
- [ 40.564898] Linux video capture interface: v2.00
- [ 40.645661] ath: EEPROM regdomain: 0x60
- [ 40.645670] ath: EEPROM indicates we should expect a direct regpair map
- [ 40.645679] ath: Country alpha2 being used: 00
- [ 40.645683] ath: Regpair used: 0x60
- [ 40.645691] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645698] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645704] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645710] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645716] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645722] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645728] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645734] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645740] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645746] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645752] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645758] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645763] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645770] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645775] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645782] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645787] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645793] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645799] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645805] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645811] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645823] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645829] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645835] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645842] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.645847] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 40.645853] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 40.696909] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 40.773633] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
- [ 40.774810] Registered led device: ath9k-phy0
- [ 40.774839] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xf8da0000, irq=17
- [ 40.790509] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5108)
- [ 40.796902] psmouse serio1: >synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
- [ 40.851841] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
- [ 40.853224] usbcore: registered new interface driver uvcvideo
- [ 40.853233] USB Video Class driver (1.1.1)
- [ 40.869261] init: failsafe main process (1474) killed by TERM signal
- [ 40.871222] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
- [ 41.414408] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
- [ 41.516673] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 41.642422] snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
- [ 41.755447] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 41.756480] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 41.881058] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 41.881071] cfg80211: World regulatory domain updated:
- [ 41.881076] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 41.881084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 41.881091] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 41.881097] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 41.881104] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 41.881111] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 42.233148] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 42.242490] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 42.351458] atl1c 0000:01:00.0: >irq 45 for MSI/MSI-X
- [ 42.369102] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 42.413929] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 43.570766] init: alsa-restore main process (1670) terminated with status 99
- [ 50.136521] composite sync not supported
- [ 50.168434] composite sync not supported
- [ 53.345762] composite sync not supported
- [ 63.649856] composite sync not supported
- [ 66.935990] composite sync not supported
- [ 69.812807] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
- [ 198.746929] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
- [ 262.829406] composite sync not supported
- [ 262.860502] composite sync not supported
- [ 265.357318] composite sync not supported
- [ 266.704561] composite sync not supported
- [ 270.312266] composite sync not supported
- [ 270.693703] composite sync not supported
- [ 272.880136] composite sync not supported
- [ 364.507072] wlan0: authenticate with d8:30:62:34:d3:15
- [ 364.548218] wlan0: send auth to d8:30:62:34:d3:15 (try 1/3)
- [ 364.556641] wlan0: authenticated
- [ 364.572091] wlan0: associate with d8:30:62:34:d3:15 (try 1/3)
- [ 364.579399] wlan0: RX AssocResp from d8:30:62:34:d3:15 (capab=0x431 status=0 aid=1)
- [ 364.579535] wlan0: associated
- [ 364.580197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 364.580389] cfg80211: Calling CRDA for country: SE
- [ 364.687615] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687628] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687635] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687642] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687647] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687654] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687660] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687666] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687673] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687679] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687685] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687692] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687698] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687705] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687711] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687718] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687724] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687731] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687738] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687745] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687751] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687758] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687764] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687771] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687777] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 364.687784] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 364.687789] cfg80211: Disabling freq 2484 MHz
- [ 364.687804] ath: regdomain 0x82f0 updated by CountryIE
- [ 364.687809] ath: EEPROM regdomain: 0x82f0
- [ 364.687813] ath: EEPROM indicates we should expect a country code
- [ 364.687819] ath: doing EEPROM country->regdmn map search
- [ 364.687825] ath: country maps to regdmn code: 0x37
- [ 364.687830] ath: Country alpha2 being used: SE
- [ 364.687834] ath: Regpair used: 0x37
- [ 364.687892] cfg80211: Regulatory domain changed to country: SE
- [ 364.687897] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 364.687904] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 364.687910] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 364.687916] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 364.687922] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 379.062048] Btrfs loaded
- [ 379.139175] JFS: nTxBlock = 7957, nTxLock = 63662
- [ 379.277039] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [ 394.267347] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 394.344394] QNX4 filesystem 0.2.3 registered.
- [ 441.226858] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 801.988371] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
- [ 975.695573] Adding 2980020k swap on /dev/sda5. Priority:-1 extents:1 across:2980020k
- [ 975.719449] Adding 2985980k swap on /dev/sdb6. Priority:-2 extents:1 across:2985980k
- [ 977.512266] usb 1-3: >reset high-speed USB device number 3 using ehci_hcd
- [ 978.593466] sd 6:0:0:0: >[sdb] Media Changed
- [ 978.593480] sd 6:0:0:0: >[sdb]
- [ 978.593487] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 978.593494] sd 6:0:0:0: >[sdb]
- [ 978.593501] Sense Key : Unit Attention [current]
- [ 978.593511] Info fld=0x0
- [ 978.593519] sd 6:0:0:0: >[sdb]
- [ 978.593529] Add. Sense: Not ready to ready change, medium may have changed
- [ 978.593538] sd 6:0:0:0: >[sdb] CDB:
- [ 978.593542] Write(10): 2a 00 00 00 1a c0 00 00 f0 00
- [ 978.593571] end_request: I/O error, dev sdb, sector 6848
- [ 978.593584] Buffer I/O error on device sdb5, logical block 600
- [ 978.593590] lost page write due to I/O error on sdb5
- [ 978.593608] Buffer I/O error on device sdb5, logical block 601
- [ 978.593614] lost page write due to I/O error on sdb5
- [ 978.593624] Buffer I/O error on device sdb5, logical block 602
- [ 978.593630] lost page write due to I/O error on sdb5
- [ 978.593639] Buffer I/O error on device sdb5, logical block 603
- [ 978.593645] lost page write due to I/O error on sdb5
- [ 978.593654] Buffer I/O error on device sdb5, logical block 604
- [ 978.593660] lost page write due to I/O error on sdb5
- [ 978.593669] Buffer I/O error on device sdb5, logical block 605
- [ 978.593676] lost page write due to I/O error on sdb5
- [ 978.593685] Buffer I/O error on device sdb5, logical block 606
- [ 978.593691] lost page write due to I/O error on sdb5
- [ 978.593700] Buffer I/O error on device sdb5, logical block 607
- [ 978.593706] lost page write due to I/O error on sdb5
- [ 978.593716] Buffer I/O error on device sdb5, logical block 608
- [ 978.593722] lost page write due to I/O error on sdb5
- [ 978.593731] Buffer I/O error on device sdb5, logical block 609
- [ 978.593737] lost page write due to I/O error on sdb5
- [ 978.852217] usb 1-3: >reset high-speed USB device number 3 using ehci_hcd
- [ 979.917309] sd 6:0:0:0: >[sdb] Media Changed
- [ 979.917326] sd 6:0:0:0: >[sdb]
- [ 979.917335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 979.917346] sd 6:0:0:0: >[sdb]
- [ 979.917353] Sense Key : Unit Attention [current]
- [ 979.917378] Info fld=0x0
- [ 979.917387] sd 6:0:0:0: >[sdb]
- [ 979.917397] Add. Sense: Not ready to ready change, medium may have changed
- [ 979.917406] sd 6:0:0:0: >[sdb] CDB:
- [ 979.917411] Write(10): 2a 00 07 44 a4 90 00 00 f0 00
- [ 979.917439] end_request: I/O error, dev sdb, sector 121939088
- [ 980.096268] usb 1-3: >reset high-speed USB device number 3 using ehci_hcd
- [ 981.097901] sd 6:0:0:0: >[sdb] Media Changed
- [ 981.097914] sd 6:0:0:0: >[sdb]
- [ 981.097921] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 981.097929] sd 6:0:0:0: >[sdb]
- [ 981.097934] Sense Key : Unit Attention [current]
- [ 981.097945] Info fld=0x0
- [ 981.097952] sd 6:0:0:0: >[sdb]
- [ 981.097962] Add. Sense: Not ready to ready change, medium may have changed
- [ 981.097971] sd 6:0:0:0: >[sdb] CDB:
- [ 981.097976] Write(10): 2a 00 07 45 93 a0 00 00 f0 00
- [ 981.098004] end_request: I/O error, dev sdb, sector 122000288
- [ 981.112291] sd 6:0:0:0: >[sdb] No Caching mode page present
- [ 981.112312] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
- [ 981.206686] usb 1-3: >USB disconnect, device number 3
- [ 981.216129] sd 6:0:0:0: >[sdb] Unhandled error code
- [ 981.216144] sd 6:0:0:0: >[sdb]
- [ 981.216150] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
- [ 981.216158] sd 6:0:0:0: >[sdb] CDB:
- [ 981.216162] Write(10): 2a 00 07 46 54 c0 00 00 f0 00
- [ 981.216188] end_request: I/O error, dev sdb, sector 122049728
- [ 981.224547] sd 6:0:0:0: >[sdb] Unhandled error code
- [ 981.224562] sd 6:0:0:0: >[sdb]
- [ 981.224569] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
- [ 981.224576] sd 6:0:0:0: >[sdb] CDB:
- [ 981.224581] Write(10): 2a 00 07 46 55 b0 00 00 f0 00
- [ 981.224607] end_request: I/O error, dev sdb, sector 122049968
- [ 981.608135] usb 1-3: >new high-speed USB device number 5 using ehci_hcd
- [ 981.744698] usb 1-3: >New USB device found, idVendor=058f, idProduct=6335
- [ 981.744711] usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 981.744719] usb 1-3: >Product: Mass Storage Device
- [ 981.744726] usb 1-3: >Manufacturer: Generic
- [ 981.744732] usb 1-3: >SerialNumber: 058F63356336
- [ 981.762128] scsi8 : usb-storage 1-3:1.0
- [ 982.760941] scsi 8:0:0:0: >Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
- [ 982.773150] sd 8:0:0:0: >Attached scsi generic sg1 type 0
- [ 983.638084] sd 8:0:0:0: >[sdd] 250116096 512-byte logical blocks: (128 GB/119 GiB)
- [ 983.638922] sd 8:0:0:0: >[sdd] Write Protect is off
- [ 983.638940] sd 8:0:0:0: >[sdd] Mode Sense: 03 00 00 00
- [ 983.639793] sd 8:0:0:0: >[sdd] No Caching mode page present
- [ 983.639809] sd 8:0:0:0: >[sdd] Assuming drive cache: write through
- [ 983.646932] sd 8:0:0:0: >[sdd] No Caching mode page present
- [ 983.646952] sd 8:0:0:0: >[sdd] Assuming drive cache: write through
- [ 983.650919] sdd: sdd1 < sdd5 sdd6 >
- [ 983.656226] sd 8:0:0:0: >[sdd] No Caching mode page present
- [ 983.656251] sd 8:0:0:0: >[sdd] Assuming drive cache: write through
- [ 983.656270] sd 8:0:0:0: >[sdd] Attached SCSI removable disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement