API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 25th, 2012
39
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.27 KB | None | 0 0
raw download clone embed print report
  1. smartctl -a /dev/sda
  2. smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  3. Home page is http://smartmontools.sourceforge.net/
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: WDC WD5000BPVT-00HXZT1
  7. Serial Number: WD-WX11A61X5787
  8. Firmware Version: 01.01A01
  9. User Capacity: 500,107,862,016 bytes
  10. Device is: Not in smartctl database [for details use: -P showall]
  11. ATA Version is: 8
  12. ATA Standard is: Exact ATA specification draft version not indicated
  13. Local Time is: Sat Aug 25 14:08:15 2012 EDT
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x00) Offline data collection activity
  22. was never started.
  23. Auto Offline Data Collection: Disabled.
  24. Self-test execution status: ( 121) The previous self-test completed having
  25. the read element of the test failed.
  26. Total time to complete Offline
  27. data collection: (12360) seconds.
  28. Offline data collection
  29. capabilities: (0x7b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. Conveyance Self-test supported.
  36. Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 2) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 123) minutes.
  46. Conveyance self-test routine
  47. recommended polling time: ( 5) minutes.
  48. SCT capabilities: (0x7035) SCT Status supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  56. 3 Spin_Up_Time 0x0027 205 201 021 Pre-fail Always - 750
  57. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1153
  58. 5 Reallocated_Sector_Ct 0x0033 165 165 140 Pre-fail Always - 297
  59. 7 Seek_Error_Rate 0x002e 194 194 000 Old_age Always - 349
  60. 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 3813
  61. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  62. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1147
  64. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 171
  65. 193 Load_Cycle_Count 0x0032 178 178 000 Old_age Always - 68424
  66. 194 Temperature_Celsius 0x0022 096 083 000 Old_age Always - 51
  67. 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
  68. 197 Current_Pending_Sector 0x0032 001 001 000 Old_age Always - 65504
  69. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  70. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  71. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  72.  
  73. SMART Error Log Version: 1
  74. ATA Error Count: 42 (device log contains only the most recent five errors)
  75. CR = Command Register [HEX]
  76. FR = Features Register [HEX]
  77. SC = Sector Count Register [HEX]
  78. SN = Sector Number Register [HEX]
  79. CL = Cylinder Low Register [HEX]
  80. CH = Cylinder High Register [HEX]
  81. DH = Device/Head Register [HEX]
  82. DC = Device Command Register [HEX]
  83. ER = Error register [HEX]
  84. ST = Status register [HEX]
  85. Powered_Up_Time is measured from power on, and printed as
  86. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  87. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  88.  
  89. Error 42 occurred at disk power-on lifetime: 3813 hours (158 days + 21 hours)
  90. When the command that caused the error occurred, the device was active or idle.
  91.  
  92. After command completion occurred, registers were:
  93. ER ST SC SN CL CH DH
  94. -- -- -- -- -- -- --
  95. 40 51 58 e0 ac a9 e9 Error: UNC 88 sectors at LBA = 0x09a9ace0 = 162114784
  96.  
  97. Commands leading to the command that caused the error were:
  98. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  99. -- -- -- -- -- -- -- -- ---------------- --------------------
  100. c8 00 58 cf ac a9 e9 08 00:24:47.132 READ DMA
  101. ef 10 02 00 00 00 a0 08 00:24:47.132 SET FEATURES [Reserved for Serial ATA]
  102. ec 00 00 00 00 00 a0 08 00:24:47.129 IDENTIFY DEVICE
  103. ef 03 46 00 00 00 a0 08 00:24:47.129 SET FEATURES [Set transfer mode]
  104.  
  105. Error 41 occurred at disk power-on lifetime: 3813 hours (158 days + 21 hours)
  106. When the command that caused the error occurred, the device was active or idle.
  107.  
  108. After command completion occurred, registers were:
  109. ER ST SC SN CL CH DH
  110. -- -- -- -- -- -- --
  111. 40 51 58 e0 ac a9 e9 Error: UNC 88 sectors at LBA = 0x09a9ace0 = 162114784
  112.  
  113. Commands leading to the command that caused the error were:
  114. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  115. -- -- -- -- -- -- -- -- ---------------- --------------------
  116. c8 00 58 cf ac a9 e9 08 00:24:42.687 READ DMA
  117. ef 10 02 00 00 00 a0 08 00:24:42.687 SET FEATURES [Reserved for Serial ATA]
  118. ec 00 00 00 00 00 a0 08 00:24:42.684 IDENTIFY DEVICE
  119. ef 03 46 00 00 00 a0 08 00:24:42.684 SET FEATURES [Set transfer mode]
  120.  
  121. Error 40 occurred at disk power-on lifetime: 3813 hours (158 days + 21 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 58 e0 ac a9 e9 Error: UNC 88 sectors at LBA = 0x09a9ace0 = 162114784
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. c8 00 58 cf ac a9 e9 08 00:24:39.196 READ DMA
  133. ef 10 02 00 00 00 a0 08 00:24:39.196 SET FEATURES [Reserved for Serial ATA]
  134. ec 00 00 00 00 00 a0 08 00:24:39.193 IDENTIFY DEVICE
  135. ef 03 46 00 00 00 a0 08 00:24:39.193 SET FEATURES [Set transfer mode]
  136.  
  137. Error 39 occurred at disk power-on lifetime: 3813 hours (158 days + 21 hours)
  138. When the command that caused the error occurred, the device was active or idle.
  139.  
  140. After command completion occurred, registers were:
  141. ER ST SC SN CL CH DH
  142. -- -- -- -- -- -- --
  143. 40 51 58 e0 ac a9 e9 Error: UNC 88 sectors at LBA = 0x09a9ace0 = 162114784
  144.  
  145. Commands leading to the command that caused the error were:
  146. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  147. -- -- -- -- -- -- -- -- ---------------- --------------------
  148. c8 00 58 cf ac a9 e9 08 00:24:34.756 READ DMA
  149. ef 10 02 00 00 00 a0 08 00:24:34.756 SET FEATURES [Reserved for Serial ATA]
  150. ec 00 00 00 00 00 a0 08 00:24:34.753 IDENTIFY DEVICE
  151. ef 03 46 00 00 00 a0 08 00:24:34.753 SET FEATURES [Set transfer mode]
  152.  
  153. Error 38 occurred at disk power-on lifetime: 3813 hours (158 days + 21 hours)
  154. When the command that caused the error occurred, the device was active or idle.
  155.  
  156. After command completion occurred, registers were:
  157. ER ST SC SN CL CH DH
  158. -- -- -- -- -- -- --
  159. 40 51 58 e0 ac a9 e9 Error: UNC 88 sectors at LBA = 0x09a9ace0 = 162114784
  160.  
  161. Commands leading to the command that caused the error were:
  162. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  163. -- -- -- -- -- -- -- -- ---------------- --------------------
  164. c8 00 58 cf ac a9 e9 08 00:24:32.013 READ DMA
  165. ef 10 02 00 00 00 a0 08 00:24:32.013 SET FEATURES [Reserved for Serial ATA]
  166. ec 00 00 00 00 00 a0 08 00:24:32.010 IDENTIFY DEVICE
  167. ef 03 46 00 00 00 a0 08 00:24:32.010 SET FEATURES [Set transfer mode]
  168.  
  169. SMART Self-test log structure revision number 1
  170. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  171. # 1 Short offline Completed: read failure 90% 3813 161940560
  172. # 2 Extended offline Completed without error 00% 3345 -
  173. # 3 Extended offline Completed without error 00% 3132 -
  174. # 4 Conveyance offline Completed without error 00% 0 -
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!