Advertisement
Guest User

Untitled

a guest
Aug 10th, 2012
477
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.12 KB | None | 0 0
  1. smartctl 5.43 2012-05-01 r3539 [i686-linux-3.3.7] (local build)
  2. Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Toshiba 2.5" HDD MK..65GSX
  6. Device Model: TOSHIBA MK2565GSX
  7. Serial Number: 90UCS38JS
  8. LU WWN Device Id: 5 000039 2c5b8818f
  9. Firmware Version: GJ003A
  10. User Capacity: 250,059,350,016 bytes [250 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Thu Aug 9 17:34:58 2012 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: FAILED!
  21. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  22. See vendor-specific Attribute list for failed Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 120) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 105) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  61. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1190
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2305
  63. 5 Reallocated_Sector_Ct 0x0033 001 001 050 Pre-fail Always FAILING_NOW 2047
  64. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  66. 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 4874
  67. 10 Spin_Retry_Count 0x0033 146 100 030 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2181
  69. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 23
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 127
  71. 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 20839
  72. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Min/Max 14/56)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 278
  74. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  77. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 78
  78. 222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4095
  79. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  80. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  81. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 328
  82. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 7756 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 7756 occurred at disk power-on lifetime: 4827 hours (201 days + 3 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 40 41 02 9c 29 03 60 Error: UNC at LBA = 0x0003299c = 207260
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 60 08 00 98 29 03 40 08 09:05:10.929 READ FPDMA QUEUED
  112. ef 10 02 00 00 00 a0 00 09:05:10.929 SET FEATURES [Reserved for Serial ATA]
  113. 27 00 00 00 00 00 e0 00 09:05:10.928 READ NATIVE MAX ADDRESS EXT
  114. ec 00 00 00 00 00 a0 00 09:05:10.928 IDENTIFY DEVICE
  115. ef 03 45 00 00 00 a0 00 09:05:10.928 SET FEATURES [Set transfer mode]
  116.  
  117. Error 7755 occurred at disk power-on lifetime: 4827 hours (201 days + 3 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 40 41 02 9c 29 03 60 Error: UNC at LBA = 0x0003299c = 207260
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 60 08 00 98 29 03 40 08 09:05:06.784 READ FPDMA QUEUED
  129. ef 10 02 00 00 00 a0 00 09:05:06.784 SET FEATURES [Reserved for Serial ATA]
  130. 27 00 00 00 00 00 e0 00 09:05:06.784 READ NATIVE MAX ADDRESS EXT
  131. ec 00 00 00 00 00 a0 00 09:05:06.783 IDENTIFY DEVICE
  132. ef 03 45 00 00 00 a0 00 09:05:06.783 SET FEATURES [Set transfer mode]
  133.  
  134. Error 7754 occurred at disk power-on lifetime: 4827 hours (201 days + 3 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 40 41 02 9c 29 03 60 Error: UNC at LBA = 0x0003299c = 207260
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 60 08 00 98 29 03 40 08 09:05:02.640 READ FPDMA QUEUED
  146. ef 10 02 00 00 00 a0 00 09:05:02.639 SET FEATURES [Reserved for Serial ATA]
  147. 27 00 00 00 00 00 e0 00 09:05:02.639 READ NATIVE MAX ADDRESS EXT
  148. ec 00 00 00 00 00 a0 00 09:05:02.639 IDENTIFY DEVICE
  149. ef 03 45 00 00 00 a0 00 09:05:02.639 SET FEATURES [Set transfer mode]
  150.  
  151. Error 7753 occurred at disk power-on lifetime: 4827 hours (201 days + 3 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 40 41 02 9c 29 03 60 Error: UNC at LBA = 0x0003299c = 207260
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 60 08 00 98 29 03 40 08 09:04:58.495 READ FPDMA QUEUED
  163. ef 10 02 00 00 00 a0 00 09:04:58.495 SET FEATURES [Reserved for Serial ATA]
  164. 27 00 00 00 00 00 e0 00 09:04:58.495 READ NATIVE MAX ADDRESS EXT
  165. ec 00 00 00 00 00 a0 00 09:04:58.494 IDENTIFY DEVICE
  166. ef 03 45 00 00 00 a0 00 09:04:58.494 SET FEATURES [Set transfer mode]
  167.  
  168. Error 7752 occurred at disk power-on lifetime: 4827 hours (201 days + 3 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 40 41 02 9c 29 03 60 Error: UNC at LBA = 0x0003299c = 207260
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. 60 08 00 98 29 03 40 08 09:04:54.350 READ FPDMA QUEUED
  180. ef 10 02 00 00 00 a0 00 09:04:54.350 SET FEATURES [Reserved for Serial ATA]
  181. 27 00 00 00 00 00 e0 00 09:04:54.350 READ NATIVE MAX ADDRESS EXT
  182. ec 00 00 00 00 00 a0 00 09:04:54.350 IDENTIFY DEVICE
  183. ef 03 45 00 00 00 a0 00 09:04:54.350 SET FEATURES [Set transfer mode]
  184.  
  185. SMART Self-test log structure revision number 1
  186. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  187.  
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement