API tools faq
paste
Advertisement
Guest User

Cubieboard Bootlog

a guest
Feb 23rd, 2015
363
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.20 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2015.01-4 (Jan 27 2015 - 22:08:58)
  2. DRAM: 1024 MiB
  3. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  4.  
  5.  
  6. U-Boot 2015.01-4 (Jan 27 2015 - 22:08:58) Arch Linux ARM
  7.  
  8. CPU: Allwinner A10 (SUN4I)
  9. I2C: ready
  10. DRAM: 1016 MiB
  11. MMC: SUNXI SD/MMC: 0
  12. *** Warning - bad CRC, using default environment
  13.  
  14. Reserved 8192kB of RAM for Framebuffer.
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. SCSI: SUNXI SCSI INIT
  19. SATA link 0 timeout.
  20. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  21. flags: ncq stag pm led clo only pmp pio slum part ccc apst
  22. Net: emac
  23. (Re)start USB...
  24. USB0: USB EHCI 1.00
  25. scanning bus 0 for devices... 1 USB Device(s) found
  26. USB1: USB EHCI 1.00
  27. scanning bus 1 for devices... 1 USB Device(s) found
  28. scanning usb for storage devices... 0 Storage Device(s) found
  29. Hit any key to stop autoboot: 2 ??? 1 ??? 0
  30. switch to partitions #0, OK
  31. mmc0 is current device
  32. Scanning mmc 0...
  33. Found U-Boot script /boot/boot.scr
  34. 805 bytes read in 120 ms (5.9 KiB/s)
  35. ## Executing script at 43100000
  36. ** File not found /boot/zImage **
  37. 3905200 bytes read in 359 ms (10.4 MiB/s)
  38. 43724 bytes read in 134 ms (318.4 KiB/s)
  39. ## Booting kernel from Legacy Image at 48000000 ...
  40. Image Name: Linux-3.4.103-3-ARCH
  41. Image Type: ARM Linux Kernel Image (uncompressed)
  42. Data Size: 3905136 Bytes = 3.7 MiB
  43. Load Address: 40008000
  44. Entry Point: 40008000
  45. Verifying Checksum ... OK
  46. Loading Kernel Image ... OK
  47.  
  48. Starting kernel ...
  49.  
  50. [ 0.000000] Booting Linux on physical CPU 0
  51. [ 0.000000] Initializing cgroup subsys cpuset
  52. [ 0.000000] Initializing cgroup subsys cpu
  53. [ 0.000000] Linux version 3.4.103-3-ARCH (builduser@leming) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 PREEMPT Fri Jan 2 20:30:18 MST 2015
  54. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  55. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  56. [ 0.000000] Machine: sun4i
  57. [ 0.000000] Memory Reserved:
  58. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  59. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  60. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  61. [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  62. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  63. [ 0.000000] sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
  64. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258064
  65. [ 0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=dfd84fd4-01 rw rootwait
  66. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  67. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  69. [ 0.000000] allocated 2080768 bytes of page_cgroup
  70. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  71. [ 0.000000] Memory: 1016MB = 1016MB total
  72. [ 0.000000] Memory: 890016k/890016k available, 150368k reserved, 262144K highmem
  73. [ 0.000000] Virtual kernel memory layout:
  74. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  75. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  76. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  77. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  78. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  79. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  80. [ 0.000000] .text : 0xc0008000 - 0xc06e0c3c (7012 kB)
  81. [ 0.000000] .init : 0xc06e1000 - 0xc070b000 ( 168 kB)
  82. [ 0.000000] .data : 0xc070c000 - 0xc075ff00 ( 336 kB)
  83. [ 0.000000] .bss : 0xc075ff24 - 0xc0808c98 ( 676 kB)
  84. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  85. [ 0.000000] NR_IRQS:128
  86. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  87. [ 0.000000] Console: colour dummy device 80x30
  88. [ 0.000086] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  89. [ 0.039999] pid_max: default: 32768 minimum: 301
  90. [ 0.040128] Mount-cache hash table entries: 512
  91. [ 0.040561] Initializing cgroup subsys cpuacct
  92. [ 0.040573] Initializing cgroup subsys memory
  93. [ 0.040601] Initializing cgroup subsys devices
  94. [ 0.040609] Initializing cgroup subsys freezer
  95. [ 0.040617] Initializing cgroup subsys blkio
  96. [ 0.040635] Initializing cgroup subsys perf_event
  97. [ 0.040701] CPU: Testing write buffer coherency: ok
  98. [ 0.040848] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  99. [ 0.040902] Setting up static identity map for 0x404c4fa0 - 0x404c4ff8
  100. [ 0.041481] devtmpfs: initialized
  101. [ 0.042561] dummy:
  102. [ 0.042719] NET: Registered protocol family 16
  103. [ 0.043143] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.043531] hw-breakpoint: debug architecture 0x4 unsupported.
  105. [ 0.044337] Init eGon pin module V2.0
  106. [ 0.044362] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  107. [ 0.044423] Initialize DMAC OK
  108. [ 0.048353] bio: create slab <bio-0> at 0
  109. [ 0.048679] sunxi_gpio driver init ver 1.3
  110. [ 0.048698] sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'
  111. [ 0.048716] gpio-sunxi: probe of gpio-sunxi failed with error -4
  112. [ 0.049039] SCSI subsystem initialized
  113. [ 0.049317] usbcore: registered new interface driver usbfs
  114. [ 0.049371] usbcore: registered new interface driver hub
  115. [ 0.049463] usbcore: registered new device driver usb
  116. [ 0.049624] Linux video capture interface: v2.00
  117. [ 0.049850] Advanced Linux Sound Architecture Driver Version 1.0.25.
  118. [ 0.050216] Bluetooth: Core ver 2.16
  119. [ 0.050240] NET: Registered protocol family 31
  120. [ 0.050249] Bluetooth: HCI device and connection manager initialized
  121. [ 0.050259] Bluetooth: HCI socket layer initialized
  122. [ 0.050267] Bluetooth: L2CAP socket layer initialized
  123. [ 0.050275] Bluetooth: SCO socket layer initialized
  124. [ 0.050518] Switching to clocksource aw_64bits_counter
  125. [ 0.050645] FS-Cache: Loaded
  126. [ 0.050763] CacheFiles: Loaded
  127. [ 0.056877] NET: Registered protocol family 2
  128. [ 0.064580] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  129. [ 0.065017] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  130. [ 0.066637] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  131. [ 0.067111] TCP: Hash tables configured (established 131072 bind 65536)
  132. [ 0.067121] TCP: reno registered
  133. [ 0.067132] UDP hash table entries: 512 (order: 1, 8192 bytes)
  134. [ 0.067156] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  135. [ 0.067332] NET: Registered protocol family 1
  136. [ 0.067617] RPC: Registered named UNIX socket transport module.
  137. [ 0.067629] RPC: Registered udp transport module.
  138. [ 0.067637] RPC: Registered tcp transport module.
  139. [ 0.067644] RPC: Registered tcp NFSv4.1 backchannel transport module.
  140. [ 0.068952] highmem bounce pool size: 64 pages
  141. [ 0.075203] VFS: Disk quotas dquot_6.5.2
  142. [ 0.075362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  143. [ 0.076544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  144. [ 0.076855] NFS: Registering the id_resolver key type
  145. [ 0.076941] FS-Cache: Netfs 'nfs' registered for caching
  146. [ 0.077375] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  147. [ 0.077867] fuse init (API version 7.18)
  148. [ 0.078719] NILFS version 2 loaded
  149. [ 0.078746] msgmni has been set to 1226
  150. [ 0.082406] alg: No test for stdrng (krng)
  151. [ 0.082652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  152. [ 0.082764] io scheduler noop registered
  153. [ 0.082774] io scheduler deadline registered
  154. [ 0.082809] io scheduler cfq registered (default)
  155. [ 0.083035] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  156. [ 0.084223] [uart]: used uart info.: 0x05
  157. [ 0.084285] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
  158. [ 0.104511] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  159. [ 0.684362] console [ttyS0] enabled
  160. [ 0.688046] [uart]: serial probe 2 irq 3 mapbase 0x01c28800
  161. [ 0.713745] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  162. [ 0.721107] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  163. [ 0.726849] G2D: head:c9000000,tail:ca000000
  164. [ 0.731189] G2D: Module initialized.major:252
  165. [ 0.736095] brd: module loaded
  166. [ 0.741269] loop: module loaded
  167. [ 0.744416] Division by zero in kernel.
  168. [ 0.748275] [<c00122cc>] (unwind_backtrace+0x0/0xdc) from [<c023c638>] (Ldiv0+0x8/0x10)
  169. [ 0.756310] [<c023c638>] (Ldiv0+0x8/0x10) from [<c029a42c>] (get_cmu_clk+0x28/0x3c)
  170. [ 0.763986] [<c029a42c>] (get_cmu_clk+0x28/0x3c) from [<c029a45c>] (set_nand_clock+0x1c/0x78)
  171. [ 0.772532] [<c029a45c>] (set_nand_clock+0x1c/0x78) from [<c06f6420>] (nand_init+0x4c/0x194)
  172. [ 0.780986] [<c06f6420>] (nand_init+0x4c/0x194) from [<c00085a8>] (do_one_initcall+0x8c/0x150)
  173. [ 0.789598] [<c00085a8>] (do_one_initcall+0x8c/0x150) from [<c06e1920>] (kernel_init+0x148/0x204)
  174. [ 0.798489] [<c06e1920>] (kernel_init+0x148/0x204) from [<c000e268>] (kernel_thread_exit+0x0/0x8)
  175. [ 0.807402] [NAND] nand driver version: 0x2 0x9
  176. [ 0.812067] [SCAN_ERR] search nand physical architecture parameter failed!
  177. [ 0.818934] [NAND]init_blklayer fail
  178. [ 0.822974] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  179. [ 0.829959] ahci: SSS flag set, parallel bus scan disabled
  180. [ 0.835487] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  181. [ 0.843938] sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc
  182. [ 0.852500] scsi0 : sw_ahci_platform
  183. [ 0.856303] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  184. [ 0.864718] [spi]: sw spi init !!
  185. [ 0.868045] [spi]: Found 0 spi devices in config files
  186. [ 0.873298] [spi]: boards num modalias max_spd_hz bus_num cs mode
  187. [ 0.880886] spi: cannot find any using configuration for all 4 spi controllers, return directly!
  188. [ 0.891442] sunxi_emac Using mii phy on PortA
  189. [ 0.905963] sunxi_emac Using MAC from SID: 02:86:02:81:68:82
  190. [ 0.913269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  191. [ 0.920007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  192. [ 0.926381] [sw-ehci1]: open clock
  193. [ 0.949745] [sw-ehci1]: Set USB Power ON
  194. [ 0.953686] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  195. [ 0.961200] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  196. [ 0.968325] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  197. [ 0.990574] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  198. [ 0.996403] hub 1-0:1.0: USB hub found
  199. [ 1.000161] hub 1-0:1.0: 1 port detected
  200. [ 1.004443] [sw-ohci1]: open clock
  201. [ 1.027805] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  202. [ 1.034964] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  203. [ 1.042047] sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
  204. [ 1.104981] hub 2-0:1.0: USB hub found
  205. [ 1.108738] hub 2-0:1.0: 1 port detected
  206. [ 1.112983] [sw-ehci2]: open clock
  207. [ 1.136353] [sw-ehci2]: Set USB Power ON
  208. [ 1.140277] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  209. [ 1.147800] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  210. [ 1.154934] sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
  211. [ 1.170554] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  212. [ 1.176322] hub 3-0:1.0: USB hub found
  213. [ 1.180079] hub 3-0:1.0: 1 port detected
  214. [ 1.184338] [sw-ohci2]: open clock
  215. [ 1.207709] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  216. [ 1.214911] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  217. [ 1.221993] ata1: SATA link down (SStatus 0 SControl 300)
  218. [ 1.227448] sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
  219. [ 1.294917] hub 4-0:1.0: USB hub found
  220. [ 1.298674] hub 4-0:1.0: 1 port detected
  221. [ 1.302854] Initializing USB Mass Storage driver...
  222. [ 1.307852] usbcore: registered new interface driver usb-storage
  223. [ 1.313881] USB Mass Storage support registered.
  224. [ 1.318531] usbcore: registered new interface driver ums-alauda
  225. [ 1.324502] usbcore: registered new interface driver ums-cypress
  226. [ 1.330555] usbcore: registered new interface driver ums-datafab
  227. [ 1.336584] usbcore: registered new interface driver ums_eneub6250
  228. [ 1.342804] usbcore: registered new interface driver ums-freecom
  229. [ 1.348832] usbcore: registered new interface driver ums-isd200
  230. [ 1.354795] usbcore: registered new interface driver ums-jumpshot
  231. [ 1.360928] usbcore: registered new interface driver ums-karma
  232. [ 1.366782] usbcore: registered new interface driver ums-onetouch
  233. [ 1.372930] usbcore: registered new interface driver ums-realtek
  234. [ 1.378963] usbcore: registered new interface driver ums-sddr09
  235. [ 1.384926] usbcore: registered new interface driver ums-sddr55
  236. [ 1.390888] usbcore: registered new interface driver ums-usbat
  237. [ 1.396850] mousedev: PS/2 mouse device common for all mice
  238. [ 1.403123] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  239. [ 1.409246] i2c /dev entries driver
  240. [ 1.413056] config i2c gpio with gpio_config api
  241. [ 1.418930] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  242. [ 1.424513] axp_mfd 0-0034: AXP internal temperature monitoring enabled
  243. [ 1.431797] I2C: i2c-0: AW16XX I2C adapter
  244. [ 1.435927] config i2c gpio with gpio_config api
  245. [ 1.440777] I2C: i2c-1: AW16XX I2C adapter
  246. [ 1.444909] config i2c gpio with gpio_config api
  247. [ 1.449707] I2C: i2c-2: AW16XX I2C adapter
  248. [ 1.453907] lirc_dev: IR Remote Control driver registered, major 251
  249. [ 1.460342] IR NEC protocol handler initialized
  250. [ 1.464887] IR RC5(x) protocol handler initialized
  251. [ 1.469672] IR RC6 protocol handler initialized
  252. [ 1.474213] IR JVC protocol handler initialized
  253. [ 1.478738] IR Sony protocol handler initialized
  254. [ 1.483366] IR RC5 (streamzap) protocol handler initialized
  255. [ 1.488932] IR SANYO protocol handler initialized
  256. [ 1.493645] IR MCE Keyboard/mouse protocol handler initialized
  257. [ 1.499470] IR LIRC bridge handler initialized
  258. [ 1.503964] [ace_drv] start!!!
  259. [ 1.507256] [ace_drv] init end!!!
  260. [ 1.510596] [pa_drv] start!!!
  261. [ 1.513758] [pa_drv] init end!!!
  262. [ 1.517080] axp20_ldo1: 1300 mV
  263. [ 1.521422] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  264. [ 1.527783] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  265. [ 1.533863] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  266. [ 1.540001] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  267. [ 1.545682] somebody is trying to set dcdc3 range to (1250000, 1250000) uV
  268. [ 1.552817] but we keep dcdc3 = 1250000 uV from the bootloader
  269. [ 1.558895] axp20_buck3: 700 <--> 3500 mV at 1250 mV
  270. [ 1.564559] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  271. [ 1.570243] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  272. [ 1.594335] Bluetooth: HCI UART driver ver 2.2
  273. [ 1.598779] Bluetooth: HCI H4 protocol initialized
  274. [ 1.603593] Bluetooth: HCI BCSP protocol initialized
  275. [ 1.608554] Bluetooth: HCILL protocol initialized
  276. [ 1.613391] cpuidle: using governor ladder
  277. [ 1.617485] cpuidle: using governor menu
  278. [ 1.621459] [mmc-msg] sw_mci_init
  279. [ 1.624904] [mmc-msg] MMC host used card: 0xb, boot card: 0x0, io_card 8
  280. [ 1.631934] [mmc-msg] sdc0 set round clock 400000, src 24000000
  281. [ 1.638016] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  282. [ 1.648128] [mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:f01a9000(4fc00000) ret 0.
  283. [ 1.656389] [mmc-msg] sdc1 set round clock 400000, src 24000000
  284. [ 1.662436] [mmc-msg] sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  285. [ 1.672525] [mmc-msg] sdc1 Probe: base:0xf1c10000 irq:33 sg_cpu:f01ab000(4fc01000) ret 0.
  286. [ 1.680777] [mmc-msg] sdc3 set round clock 400000, src 24000000
  287. [ 1.686797] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  288. [ 1.696885] [mmc-msg] sdc3 Probe: base:0xf1c12000 irq:35 sg_cpu:f01ad000(4fc02000) ret 0.
  289. [ 1.705103] [mmc_pm]: no sdio card used in configuration
  290. [ 1.710419] ledtrig-cpu: registered to indicate activity on CPUs
  291. [ 1.716926] usbcore: registered new interface driver usbhid
  292. [ 1.722518] usbhid: USB HID core driver
  293. [ 1.726351] Linux telephony interface: v1.00
  294. [ 1.732320] IPv4 over IPv4 tunneling driver
  295. [ 1.736975] TCP: cubic registered
  296. [ 1.740290] Initializing XFRM netlink socket
  297. [ 1.745236] NET: Registered protocol family 10
  298. [ 1.750411] NET: Registered protocol family 17
  299. [ 1.754914] NET: Registered protocol family 15
  300. [ 1.759460] Bluetooth: RFCOMM TTY layer initialized
  301. [ 1.764403] Bluetooth: RFCOMM socket layer initialized
  302. [ 1.769537] Bluetooth: RFCOMM ver 1.11
  303. [ 1.773304] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  304. [ 1.778611] Bluetooth: BNEP filters: protocol multicast
  305. [ 1.783849] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  306. [ 1.789866] 8021q: 802.1Q VLAN Support v1.8
  307. [ 1.794099] [mmc_pm]: No sdio card, please check your config !!
  308. [ 1.800023] Registering the dns_resolver key type
  309. [ 1.804844] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  310. [ 1.812545] Registering SWP/SWPB emulation handler
  311. [ 1.818088] registered taskstats version 1
  312. [ 1.823148] axp20_buck3: incomplete constraints, leaving on
  313. [ 1.828967] axp20_buck2: incomplete constraints, leaving on
  314. [ 1.834804] axp20_ldo4: incomplete constraints, leaving on
  315. [ 1.840537] axp20_ldo3: incomplete constraints, leaving on
  316. [ 1.846267] axp20_ldo2: incomplete constraints, leaving on
  317. [ 1.852014] axp20_ldo1: incomplete constraints, leaving on
  318. [ 1.857632] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:07:50 UTC (1262304470)
  319. [ 1.866230] ALSA device list:
  320. [ 1.869197] #0: sunxi-CODEC Audio Codec
  321. [ 1.873630] Waiting for root device PARTUUID=dfd84fd4-01...
  322. [ 2.635507] [mmc-msg] mmc 0 detect change, present 1
  323. [ 3.130555] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  324. [ 3.139503] [mmc-msg] sdc0 power on
  325. [ 3.143031] [ccmu] set sdc0 reset status to 0 failed!
  326. [ 3.148080] [mmc-err] Failed to release sdc0 reset
  327. [ 3.170544] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  328. [ 3.179950] [mmc-msg] sdc0 set round clock 400000, src 24000000
  329. [ 3.267850] [mmc-err] smc 0 err, cmd 52, RTO
  330. [ 3.273030] [mmc-err] smc 0 err, cmd 52, RTO
  331. [ 3.277401] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  332. [ 3.289172] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  333. [ 3.300688] [mmc-err] smc 0 err, cmd 5, RTO
  334. [ 3.305775] [mmc-err] smc 0 err, cmd 5, RTO
  335. [ 3.310863] [mmc-err] smc 0 err, cmd 5, RTO
  336. [ 3.315950] [mmc-err] smc 0 err, cmd 5, RTO
  337. [ 3.320869] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  338. [ 3.330256] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  339. [ 3.342040] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  340. [ 3.383272] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  341. [ 3.392591] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  342. [ 3.402106] [mmc-msg] sdc0 set round clock 48000000, src 960000000
  343. [ 3.463346] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  344. [ 3.472842] mmc0: new high speed SDHC card at address 59b4
  345. [ 3.478590] mmcblk0: mmc0:59b4 00000 7.36 GiB
  346. [ 3.484519] mmcblk0: p1
  347. [ 3.521357] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
  348. [ 3.536173] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
  349. [ 3.572620] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  350. [ 3.580797] VFS: Mounted root (ext4 filesystem) on device 179:1.
  351. [ 3.590657] devtmpfs: mounted
  352. [ 3.593857] Freeing init memory: 168K
  353. [ 3.905997] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  354. [ 3.924333] systemd[1]: Detected architecture 'arm'.
  355.  
  356. Welcome to ?[0;36mArch Linux ARM?[0m!
  357.  
  358. [ 3.951637] systemd[1]: Set hostname to <alarm>.
  359. [ 4.450928] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  360. [ 4.475446] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  361. [ 4.483682] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  362. [ 4.491456] systemd[1]: Starting Remote File Systems.
  363. [?[32m OK ?[0m] Reached target Remote File Systems.
  364. [ 4.520648] systemd[1]: Reached target Remote File Systems.
  365. [ 4.526357] systemd[1]: Expecting device dev-mmcblk0p1.device...
  366. Expecting device dev-mmcblk0p1.device...
  367. [ 4.550683] systemd[1]: Starting Root Slice.
  368. [?[32m OK ?[0m] Created slice Root Slice.
  369. [ 4.570630] systemd[1]: Created slice Root Slice.
  370. [ 4.575517] systemd[1]: Starting System Slice.
  371. [?[32m OK ?[0m] Created slice System Slice.
  372. [ 4.600629] systemd[1]: Created slice System Slice.
  373. [ 4.605708] systemd[1]: Starting system-getty.slice.
  374. [?[32m OK ?[0m] Created slice system-getty.slice.
  375. [ 4.630634] systemd[1]: Created slice system-getty.slice.
  376. [ 4.636184] systemd[1]: Starting Device-mapper event daemon FIFOs.
  377. [?[32m OK ?[0m] Listening on Device-mapper event daemon FIFOs.
  378. [ 4.660642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  379. [ 4.667341] systemd[1]: Starting udev Control Socket.
  380. [?[32m OK ?[0m] Listening on udev Control Socket.
  381. [ 4.690618] systemd[1]: Listening on udev Control Socket.
  382. [ 4.696175] systemd[1]: Starting udev Kernel Socket.
  383. [?[32m OK ?[0m] Listening on udev Kernel Socket.
  384. [ 4.720632] systemd[1]: Listening on udev Kernel Socket.
  385. [ 4.726066] systemd[1]: Starting LVM2 metadata daemon socket.
  386. [?[32m OK ?[0m] Listening on LVM2 metadata daemon socket.
  387. [ 4.760625] systemd[1]: Listening on LVM2 metadata daemon socket.
  388. [ 4.766881] systemd[1]: Starting Journal Socket.
  389. [?[32m OK ?[0m] Listening on Journal Socket.
  390. [ 4.790619] systemd[1]: Listening on Journal Socket.
  391. [ 4.795784] systemd[1]: Starting udev Coldplug all Devices...
  392. Starting udev Coldplug all Devices...
  393. [ 4.834148] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  394. Starting Create list of required st... nodes for the current kernel...
  395. [ 4.875222] systemd[1]: Mounted Debug File System.
  396. [ 4.892053] systemd[1]: Starting Remount Root and Kernel File Systems...
  397. Starting Remount Root and Kernel File Systems...
  398. [ 4.933442] systemd[1]: Starting Encrypted Volumes.
  399. [?[32m OK ?[0m] Reached target Encrypted Volumes.
  400. [ 4.960705] systemd[1]: Reached target Encrypted Volumes.
  401. [ 4.966356] systemd[1]: Starting Setup Virtual Console...
  402. Starting Setup Virtual Console...
  403. [ 4.993395] systemd[1]: Starting User and Session Slice.
  404. [?[32m OK ?[0m] Created slice User and Session Slice.
  405. [ 5.020718] systemd[1]: Created slice User and Session Slice.
  406. [ 5.026664] systemd[1]: Starting Slices.
  407. [?[32m OK ?[0m] Reached target Slices.
  408. [ 5.050634] systemd[1]: Reached target Slices.
  409. [ 5.055272] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  410. [ 5.063591] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  411. [ 5.076704] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  412. [?[32m OK ?[0m] Set up automount Arbitrary Executab...ats File System Automount Point.
  413. [ 5.110644] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  414. [ 5.122729] systemd[1]: Started Set Up Additional Binary Formats.
  415. [ 5.129004] systemd[1]: Mounting Temporary Directory...
  416. Mounting Temporary Directory...
  417. [ 5.154120] systemd[1]: Expecting device dev-ttyS0.device...
  418. Expecting device dev-ttyS0.device...
  419. [ 5.181200] systemd[1]: Mounted Huge Pages File System.
  420. [ 5.186553] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  421. [?[32m OK ?[0m] Listening on /dev/initctl Compatibility Named Pipe.
  422. [ 5.210630] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  423. [ 5.217744] systemd[1]: Starting Journal Socket (/dev/log).
  424. [?[32m OK ?[0m] Listening on Journal Socket (/dev/log).
  425. [ 5.240633] systemd[1]: Listening on Journal Socket (/dev/log).
  426. [ 5.280822] systemd[1]: Listening on Journal Audit Socket.
  427. [ 5.286504] systemd[1]: Mounting POSIX Message Queue File System...
  428. Mounting POSIX Message Queue File System...
  429. [ 5.313156] systemd[1]: Starting Swap.
  430. [?[32m OK ?[0m] Reached target Swap.
  431. [ 5.340686] systemd[1]: Reached target Swap.
  432. [ 5.345165] systemd[1]: Starting Paths.
  433. [?[32m OK ?[0m] Reached target Paths.
  434. [ 5.375605] systemd[1]: Reached target Paths.
  435. [ 5.383314] systemd[1]: Started Load Kernel Modules.
  436. [ 5.388684] systemd[1]: Mounted Configuration File System.
  437. [ 5.394355] systemd[1]: Mounting FUSE Control File System...
  438. Mounting FUSE Control File System...
  439. [ 5.423125] systemd[1]: Starting system-serial\x2dgetty.slice.
  440. [?[32m OK ?[0m] Created slice system-serial\x2dgetty.slice.
  441. [ 5.460677] systemd[1]: Created slice system-serial\x2dgetty.slice.
  442. [ 5.467182] systemd[1]: Starting Apply Kernel Variables...
  443. Starting Apply Kernel Variables...
  444. [ 5.493321] systemd[1]: Starting Journal Service...
  445. Starting Journal Service...
  446. [ 5.523553] systemd[1]: Starting Delayed Shutdown Socket.
  447. [?[32m OK ?[0m] Listening on Delayed Shutdown Socket.
  448. [ 5.550725] systemd[1]: Listening on Delayed Shutdown Socket.
  449. [?[32m OK ?[0m] Mounted POSIX Message Queue File System.
  450. [ 5.590725] systemd[1]: Mounted POSIX Message Queue File System.
  451. [?[32m OK ?[0m] Mounted FUSE Control File System.
  452. [ 5.620702] systemd[1]: Mounted FUSE Control File System.
  453. [?[32m OK ?[0m] Mounted Temporary Directory.
  454. [ 5.635642] systemd[1]: Mounted Temporary Directory.
  455. [?[32m OK ?[0m] Started Create list of required sta...ce nodes for the current kernel.
  456. [ 5.680758] systemd[1]: Started Create list of required static device nodes for the current kernel.
  457. [?[32m OK ?[0m] Started Remount Root and Kernel File Systems.
  458. [ 5.720764] systemd[1]: Started Remount Root and Kernel File Systems.
  459. [?[32m OK ?[0m] Started Setup Virtual Console.
  460. [ 5.736053] systemd[1]: Started Setup Virtual Console.
  461. [?[32m OK ?[0m] Started Apply Kernel Variables.
  462. [ 5.760670] systemd[1]: Started Apply Kernel Variables.
  463. [?[32m OK ?[0m] Started udev Coldplug all Devices.
  464. [ 5.800711] systemd[1]: Started udev Coldplug all Devices.
  465. [ 5.807900] systemd[1]: Started First Boot Wizard.
  466. [ 5.814095] systemd[1]: Started Rebuild Dynamic Linker Cache.
  467. [ 5.826885] systemd[1]: Started Rebuild Hardware Database.
  468. [ 5.832613] systemd[1]: Started Create System Users.
  469. [ 5.838714] systemd[1]: Starting Load/Save Random Seed...
  470. Starting Load/Save Random Seed...
  471. [ 5.863715] systemd[1]: Starting Create Static Device Nodes in /dev...
  472. Starting Create Static Device Nodes in /dev...
  473. [?[32m OK ?[0m] Started Journal Service.
  474. [ 5.919919] systemd[1]: Started Journal Service.
  475. [?[32m OK ?[0m] Started Load/Save Random Seed.
  476. Starting Flush Journal to Persistent Storage...
  477. [?[32m OK ?[0m] Started Create Static Device Nodes in /dev.
  478. [?[32m OK ?[0m] Reached target Local File Systems (Pre).
  479. Starting udev Kernel Device Manager...
  480. [ 6.084838] systemd-journald[68]: Received request to flush runtime journal from PID 1
  481. [?[32m OK ?[0m] Started Flush Journal to Persistent Storage.
  482. [?[32m OK ?[0m] Started udev Kernel Device Manager.
  483. [?[32m OK ?[0m] Found device /dev/ttyS0.
  484. [?[32m OK ?[0m] Reached target Sound Card.
  485. [?[32m OK ?[0m] Found device /dev/mmcblk0p1.
  486. Mounting /boot...
  487. [?[1;31mFAILED?[0m] Failed to mount /boot.
  488. See "systemctl status boot.mount" for details.
  489. [?[1;33mDEPEND?[0m] Dependency failed for Local File Systems.
  490. [?[32m OK ?[0m] Stopped Getty on tty1.
  491. [?[32m OK ?[0m] Stopped target Graphical Interface.
  492. [?[32m OK ?[0m] Stopped target Multi-User System.
  493. [?[32m OK ?[0m] Stopped Network Name Resolution.
  494. [?[32m OK ?[0m] Stopped OpenSSH Daemon.
  495. [?[32m OK ?[0m] Stopped D-Bus System Message Bus.
  496. Starting Network Service...
  497. [?[32m OK ?[0m] Reached target Timers.
  498. [?[32m OK ?[0m] Stopped SSH Key Generation.
  499. [?[32m OK ?[0m] Stopped Entropy Harvesting Daemon.
  500. [?[32m OK ?[0m] Stopped Serial Getty on ttyS0.
  501. [?[32m OK ?[0m] Stopped Permit User Sessions.
  502. [ 7.194496] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  503. [?[32m OK ?[0m] Reached target Login Prompts.
  504. [?[32m OK ?[0m] Stopped Login Service.
  505. [?[32m OK ?[0m] Stopped target Basic System.
  506. [?[32m OK ?[0m] Closed D-Bus System Message Bus Socket.
  507. [?[32m OK ?[0m] Reached target Sockets.
  508. [?[32m OK ?[0m] Stopped target System Initialization.
  509. Starting Emergency Shell...
  510. [?[32m OK ?[0m] Started Emergency Shell.
  511. Starting Create Volatile Files and Directories...
  512. [?[32m OK ?[0m] Reached target Emergency Mode.
  513. [?[32m OK ?[0m] Started Network Service.
  514. [?[32m OK ?[0m] Started Create Volatile Files and Directories.
  515. Starting Network Time Synchronization...
  516. Starting Update UTMP about System Boot/Shutdown...
  517. [?[32m OK ?[0m] Reached target Network.
  518. [?[32m OK ?[0m] Started Network Time Synchronization.
  519. [?[32m OK ?[0m] Started Update UTMP about System Boot/Shutdown.
  520. [?[32m OK ?[0m] Reached target System Time Synchronized.
  521. Welcome to emergency mode! After logging in, type "journalctl -xb" to view
  522. system logs, "systemctl reboot" to reboot, "systemctl default" or ^D to
  523. try again to boot into default mode.
  524. Give root password for maintenance
  525. (or press Control-D to continue):
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!