pcDuino3b Kernel and OS installation guide v2

- Download and install PhoenixSuite 1.0.6 https://s3.amazonaws.com/pcduino/Tools/PhoenixSuit1.0.6.zip
- During installation you will get a prompt for driver install, click yes
- Download Kernel https://s3.amazonaws.com/pcduino/Images/pcduino3nano/ubuntu/pcduino3b_lvds_a20_kernel_livesuit_20150314.img
- Download custom Ubuntu https://s3.amazonaws.com/pcduino/Images/v3/20150417/pcduino3_ubuntu_20150417.zip
- Insert MicroSD card into PC
- Format MicroSD card
- Extract the "pcduino3nano_ubuntu_20140807.7z" file
- Copy "pcduino3_ubuntu_20140807.img" and "update.sh" to micro sd card
- Plug in pcDuino using micro usb power port (center port on ethernet side), into wall
- Plug in pcDuino using micro usb OTG port (off center port on full sized usb side), into pc
- Open PheonixSuite
- Click Firmware
- Select Image "pcduino3_lvds_a20_dd_kernel_20141208.img"
- Press and hold Upgrade button ON PCDUINO for ten seconds then press Reset ON PCDUINO until pcDuino restarts
- Release Reset
- Release Upgrade
- Phoenix suite should have opened a window, top line says "Tips: Does mandatory format?"
- Click Yes
- Upgrade should start (PhoenixSuite "Upgrading Firmware .....")
- PhoenixSuite should say "Upgrade Firmware Succeeded"
- LVDS screen should turn on, you will see text going down the screen
- When screen is blank insert MicroSD card into pcDuino
- The TX led should start flashing while the RX led stays solid
- When the TX led and the RX led blink slowly together the flash is complete (if they are both blinking rapidly the flash failed). This should take 10-20 minutes
- When the flash is complete, remove the micro sd card and restart the pcDuino