Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.38.8-desktop-69mib (utente@localhost.localdomain) (gcc version 4.4.3 (GCC) ) #1 SMP Sat Jun 4 15:47:14 CEST 2011
- Command line: BOOT_IMAGE=Mandriva_20102_26388-desktop-69 root=UUID=34090b9a-132f-4997-906a-2036e839783a resume=UUID=60067c8b-09a3-40b8-bc1c-6b176f824f9a usbcore.autosuspend=1 vga=794
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
- BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
- BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
- BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
- BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
- BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- NX (Execute Disable) protection: active
- DMI present.
- DMI: System manufacturer System Product Name/M3A78-CM, BIOS 2801 08/23/2010
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- No AGP bridge found
- last_pfn = 0x130000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-EFFFF uncachable
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF80000000 write-back
- 1 base 000080000000 mask FFFFC0000000 write-back
- 2 base 0000C0000000 mask FFFFF0000000 write-back
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- TOM2: 0000000130000000 aka 4864M
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- last_pfn = 0xcff80 max_arch_pfn = 0x400000000
- found SMP MP-table at [ffff8800000ff780] ff780
- initial memory mapped : 0 - 20000000
- Using GB pages for direct mapping
- init_memory_mapping: 0000000000000000-00000000cff80000
- 0000000000 - 00c0000000 page 1G
- 00c0000000 - 00cfe00000 page 2M
- 00cfe00000 - 00cff80000 page 4k
- kernel direct mapping tables up to cff80000 @ 1fffd000-20000000
- init_memory_mapping: 0000000100000000-0000000130000000
- 0100000000 - 0130000000 page 2M
- kernel direct mapping tables up to 130000000 @ cff7e000-cff80000
- RAMDISK: 37a7f000 - 37ff0000
- ACPI: RSDP 00000000000fb520 00024 (v02 ACPIAM)
- ACPI: XSDT 00000000cff80100 0005C (v01 082310 XSDT1625 20100823 MSFT 00000097)
- ACPI: FACP 00000000cff80290 000F4 (v03 082310 FACP1625 20100823 MSFT 00000097)
- ACPI: DSDT 00000000cff805d0 0733E (v01 A0901 A0901001 00000001 INTL 20060113)
- ACPI: FACS 00000000cff8e000 00040
- ACPI: APIC 00000000cff80390 0007C (v01 082310 APIC1625 20100823 MSFT 00000097)
- ACPI: MCFG 00000000cff80410 0003C (v01 082310 OEMMCFG 20100823 MSFT 00000097)
- ACPI: OEMB 00000000cff8e040 00071 (v01 082310 OEMB1625 20100823 MSFT 00000097)
- ACPI: SRAT 00000000cff87910 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
- ACPI: HPET 00000000cff87a00 00038 (v01 082310 OEMHPET 20100823 MSFT 00000097)
- ACPI: SSDT 00000000cff87a40 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
- ACPI: Local APIC address 0xfee00000
- SRAT: PXM 0 -> APIC 0x00 -> Node 0
- SRAT: PXM 0 -> APIC 0x01 -> Node 0
- SRAT: PXM 0 -> APIC 0x02 -> Node 0
- SRAT: PXM 0 -> APIC 0x03 -> Node 0
- SRAT: Node 0 PXM 0 0-a0000
- SRAT: Node 0 PXM 0 100000-d0000000
- SRAT: Node 0 PXM 0 100000000-130000000
- SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
- SRAT: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000)
- NUMA: Using 63 for the hash shift.
- Initmem setup node 0 0000000000000000-0000000130000000
- NODE_DATA [000000012fffb000 - 000000012fffffff]
- [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00130000
- Movable zone start PFN for each node
- early_node_map[3] active PFN ranges
- 0: 0x00000010 -> 0x0000009e
- 0: 0x00000100 -> 0x000cff80
- 0: 0x00100000 -> 0x00130000
- On node 0 totalpages: 1048334
- DMA zone: 56 pages used for memmap
- DMA zone: 6 pages reserved
- DMA zone: 3920 pages, LIFO batch:0
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 833464 pages, LIFO batch:31
- Normal zone: 2688 pages used for memmap
- Normal zone: 193920 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8300 base: 0xfed00000
- SMP: Allowing 6 CPUs, 2 hotplug CPUs
- nr_irqs_gsi: 40
- PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
- PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
- PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
- PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
- PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
- Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
- PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s82688 r8192 d23808 u262144
- pcpu-alloc: s82688 r8192 d23808 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 - -
- Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031304
- Policy zone: Normal
- Kernel command line: BOOT_IMAGE=Mandriva_20102_26388-desktop-69 root=UUID=34090b9a-132f-4997-906a-2036e839783a resume=UUID=60067c8b-09a3-40b8-bc1c-6b176f824f9a usbcore.autosuspend=1 vga=794
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Checking aperture...
- No AGP bridge found
- Node 0: aperture @ c4000000 size 32 MB
- Aperture pointing to e820 RAM. Ignoring.
- Your BIOS doesn't leave a aperture memory hole
- Please enable the IOMMU option in the BIOS setup
- This costs you 64 MB of RAM
- Mapping aperture over 65536 KB of RAM @ c4000000
- PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
- Memory: 3986644k/4980736k available (4139k kernel code, 787400k absent, 206692k reserved, 3246k data, 760k init)
- SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- NR_IRQS:2304
- Extended CMOS year: 2000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- allocated 41943040 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 2806.633 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.26 BogoMIPS (lpj=2806633)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- TOMOYO Linux initialized
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Mount-cache hash table entries: 256
- Initializing cgroup subsys ns
- ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- tseg: 0000000000
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 6 MCE banks
- ACPI: Checking initramfs for custom DSDT
- ACPI: Core revision 20110112
- ftrace: allocating 16450 entries in 65 pages
- Setting APIC routing to flat
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: AMD Phenom(tm) II X4 920 Processor stepping 02
- Performance Events: AMD PMU driver.
- ... version: 0
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 00007fffffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000000000f
- MCE: In-kernel MCE decoding enabled.
- Booting Node 0, Processors #1 #2 #3
- Brought up 4 CPUs
- Total of 4 processors activated (22450.82 BogoMIPS).
- devtmpfs: initialized
- Time: 18:10:28 Date: 02/03/12
- NET: Registered protocol family 16
- node 0 link 0: io port [1000, ffffff]
- TOM: 00000000d0000000 aka 3328M
- Fam 10h mmconf [e0000000, efffffff]
- node 0 link 0: mmio [a0000, bffff]
- node 0 link 0: mmio [d0000000, dfffffff]
- node 0 link 0: mmio [e0000000, efffffff] ==> none
- node 0 link 0: mmio [f0000000, ffefffff]
- TOM2: 0000000130000000 aka 4864M
- bus: [00, 07] on node 0 link 0
- bus: 00 index 0 [io 0x0000-0xffff]
- bus: 00 index 1 [mem 0x000a0000-0x000bffff]
- bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
- bus: 00 index 3 [mem 0xf0000000-0xffffffff]
- bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
- Extended Config Space enabled on 1 nodes
- ACPI: bus type pci registered
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: not using MMCONFIG
- PCI: Using configuration type 1 for base access
- PCI: Using configuration type 1 for extended access
- mtrr: your CPUs had inconsistent fixed MTRR settings
- mtrr: probably your BIOS does not setup all CPUs.
- mtrr: corrected configuration.
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 2 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- ACPI: No dock devices found.
- HEST: Table not found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
- pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
- pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
- pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: PME# disabled
- pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
- pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:06.0: PME# disabled
- pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
- pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
- pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
- pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
- pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
- pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
- pci 0000:00:11.0: reg 24: [mem 0xf7fff800-0xf7fffbff]
- pci 0000:00:11.0: set SATA to AHCI mode
- pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- pci 0000:00:12.0: reg 10: [mem 0xf7ffe000-0xf7ffefff]
- pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
- pci 0000:00:12.1: reg 10: [mem 0xf7ffd000-0xf7ffdfff]
- pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- pci 0000:00:12.2: reg 10: [mem 0xf7fff000-0xf7fff0ff]
- pci 0000:00:12.2: supports D1 D2
- pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:12.2: PME# disabled
- pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
- pci 0000:00:13.0: reg 10: [mem 0xf7ffc000-0xf7ffcfff]
- pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
- pci 0000:00:13.1: reg 10: [mem 0xf7ffb000-0xf7ffbfff]
- pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
- pci 0000:00:13.2: reg 10: [mem 0xf7ffa800-0xf7ffa8ff]
- pci 0000:00:13.2: supports D1 D2
- pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:13.2: PME# disabled
- pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
- pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
- pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
- pci 0000:00:14.2: reg 10: [mem 0xf7ff4000-0xf7ff7fff 64bit]
- pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:14.2: PME# disabled
- pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
- pci 0000:00:14.5: reg 10: [mem 0xf7ff9000-0xf7ff9fff]
- pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
- pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
- pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
- pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
- pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
- pci 0000:01:00.0: [10de:0e22] type 0 class 0x000300
- pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
- pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
- pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
- pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
- pci 0000:01:00.0: reg 30: [mem 0xfbe80000-0xfbefffff pref]
- pci 0000:01:00.1: [10de:0beb] type 0 class 0x000403
- pci 0000:01:00.1: reg 10: [mem 0xfbe7c000-0xfbe7ffff]
- pci 0000:00:02.0: PCI bridge to [bus 01-01]
- pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbefffff]
- pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
- pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
- pci 0000:02:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit]
- pci 0000:02:00.0: reg 20: [mem 0xf6ff0000-0xf6ffffff 64bit pref]
- pci 0000:02:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:00:06.0: PCI bridge to [bus 02-02]
- pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
- pci 0000:00:06.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
- pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- pci0000:00: Requesting ACPI _OSC control (0x1d)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009ec00 - 000000000009ffff
- reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- Switching to clocksource hpet
- Switched to NOHz mode on CPU #0
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #2
- Switched to NOHz mode on CPU #1
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000d0000-0x000dffff window]
- pnp 00:00: [mem 0xd0000000-0xdfffffff window]
- pnp 00:00: [mem 0xf0000000-0xfed44fff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:02: [dma 4]
- pnp 00:02: [io 0x0000-0x000f]
- pnp 00:02: [io 0x0081-0x0083]
- pnp 00:02: [io 0x0087]
- pnp 00:02: [io 0x0089-0x008b]
- pnp 00:02: [io 0x008f]
- pnp 00:02: [io 0x00c0-0x00df]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:03: [io 0x0070-0x0071]
- pnp 00:03: [irq 8]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:04: [io 0x0061]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:05: [io 0x00f0-0x00ff]
- pnp 00:05: [irq 13]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:06: [io 0x0378-0x037f]
- pnp 00:06: [irq 7]
- pnp 00:06: [dma 0 disabled]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
- pnp 00:07: [mem 0xfed00000-0xfed003ff]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
- pnp 00:08: [io 0x0060]
- pnp 00:08: [io 0x0064]
- pnp 00:08: [irq 1]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- pnp 00:09: [io 0x03f8-0x03ff]
- pnp 00:09: [irq 4]
- pnp 00:09: [dma 0 disabled]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0a: [mem 0xfec00000-0xfec00fff]
- pnp 00:0a: [mem 0xfee00000-0xfee00fff]
- system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0b: [io 0x0010-0x001f]
- pnp 00:0b: [io 0x0022-0x003f]
- pnp 00:0b: [io 0x0062-0x0063]
- pnp 00:0b: [io 0x0065-0x006f]
- pnp 00:0b: [io 0x0072-0x007f]
- pnp 00:0b: [io 0x0080]
- pnp 00:0b: [io 0x0084-0x0086]
- pnp 00:0b: [io 0x0088]
- pnp 00:0b: [io 0x008c-0x008e]
- pnp 00:0b: [io 0x0090-0x009f]
- pnp 00:0b: [io 0x00a2-0x00bf]
- pnp 00:0b: [io 0x00b1]
- pnp 00:0b: [io 0x00e0-0x00ef]
- pnp 00:0b: [io 0x04d0-0x04d1]
- pnp 00:0b: [io 0x040b]
- pnp 00:0b: [io 0x04d6]
- pnp 00:0b: [io 0x0c00-0x0c01]
- pnp 00:0b: [io 0x0c14]
- pnp 00:0b: [io 0x0c50-0x0c51]
- pnp 00:0b: [io 0x0c52]
- pnp 00:0b: [io 0x0c6c]
- pnp 00:0b: [io 0x0c6f]
- pnp 00:0b: [io 0x0cd0-0x0cd1]
- pnp 00:0b: [io 0x0cd2-0x0cd3]
- pnp 00:0b: [io 0x0cd4-0x0cd5]
- pnp 00:0b: [io 0x0cd6-0x0cd7]
- pnp 00:0b: [io 0x0cd8-0x0cdf]
- pnp 00:0b: [io 0x0b00-0x0b3f]
- pnp 00:0b: [io 0x0800-0x089f]
- pnp 00:0b: [io 0x0b20-0x0b2f]
- pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:0b: [io 0x0900-0x090f]
- pnp 00:0b: [io 0x0910-0x091f]
- pnp 00:0b: [io 0xfe00-0xfefe]
- pnp 00:0b: [mem 0xffb80000-0xffbfffff]
- pnp 00:0b: [mem 0xfec10000-0xfec1001f]
- pnp 00:0b: [mem 0xfed40000-0xfed44fff]
- system 00:0b: [io 0x04d0-0x04d1] has been reserved
- system 00:0b: [io 0x040b] has been reserved
- system 00:0b: [io 0x04d6] has been reserved
- system 00:0b: [io 0x0c00-0x0c01] has been reserved
- system 00:0b: [io 0x0c14] has been reserved
- system 00:0b: [io 0x0c50-0x0c51] has been reserved
- system 00:0b: [io 0x0c52] has been reserved
- system 00:0b: [io 0x0c6c] has been reserved
- system 00:0b: [io 0x0c6f] has been reserved
- system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
- system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
- system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
- system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
- system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
- system 00:0b: [io 0x0b00-0x0b3f] has been reserved
- system 00:0b: [io 0x0800-0x089f] has been reserved
- system 00:0b: [io 0x0b20-0x0b2f] has been reserved
- system 00:0b: [io 0x0900-0x090f] has been reserved
- system 00:0b: [io 0x0910-0x091f] has been reserved
- system 00:0b: [io 0xfe00-0xfefe] has been reserved
- system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
- system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
- system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
- system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:0c: [io 0x0230-0x023f]
- pnp 00:0c: [io 0x0290-0x029f]
- pnp 00:0c: [io 0x0300-0x030f]
- pnp 00:0c: [io 0x0a30-0x0a3f]
- system 00:0c: [io 0x0230-0x023f] has been reserved
- system 00:0c: [io 0x0290-0x029f] has been reserved
- system 00:0c: [io 0x0300-0x030f] has been reserved
- system 00:0c: [io 0x0a30-0x0a3f] has been reserved
- system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0d: [mem 0xe0000000-0xefffffff]
- system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0e: [mem 0x00000000-0x0009ffff]
- pnp 00:0e: [mem 0x000c0000-0x000cffff]
- pnp 00:0e: [mem 0x000e0000-0x000fffff]
- pnp 00:0e: [mem 0x00100000-0xcfffffff]
- pnp 00:0e: [mem 0xfed45000-0xffffffff]
- system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
- system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
- system 00:0e: [mem 0xfed45000-0xffffffff] could not be reserved
- system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 15 devices
- ACPI: ACPI bus type pnp unregistered
- pci 0000:00:02.0: PCI bridge to [bus 01-01]
- pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbefffff]
- pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
- pci 0000:00:06.0: PCI bridge to [bus 02-02]
- pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
- pci 0000:00:06.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
- pci 0000:00:14.4: PCI bridge to [bus 03-03]
- pci 0000:00:14.4: bridge window [io disabled]
- pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
- pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:02.0: setting latency timer to 64
- pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:06.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
- pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
- pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
- pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
- pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
- pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
- pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed44fff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 524288 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- pci 0000:01:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 5572k freed
- PCI-DMA: Disabling AGP.
- PCI-DMA: aperture base @ c4000000 size 65536 KB
- PCI-DMA: using GART IOMMU.
- PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- audit: initializing netlink socket (disabled)
- type=2000 audit(1328292627.644:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 7926
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:02.0: setting latency timer to 64
- pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
- pcieport 0000:00:06.0: setting latency timer to 64
- pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
- ERST: Table is not found!
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- Linux agpgart interface v0.103
- brd: module loaded
- i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- serio: i8042 KBD port at 0x60,0x64 irq 1
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- Registering the dns_resolver key type
- PM: Checking hibernation image partition UUID=60067c8b-09a3-40b8-bc1c-6b176f824f9a
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- Magic number: 0:724:189
- acpi device:1b: hash matches
- rtc_cmos 00:03: setting system clock to 2012-02-03 18:10:28 UTC (1328292628)
- BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
- Freeing unused kernel memory: 760k freed
- nash-hotplug (72): /proc/72/oom_adj is deprecated, please use /proc/72/oom_score_adj instead.
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ahci 0000:00:11.0: version 3.0
- ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- ata1: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fff900 irq 22
- ata2: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fff980 irq 22
- ata3: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fffa00 irq 22
- ata4: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fffa80 irq 22
- ata4: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link down (SStatus 0 SControl 300)
- ata1: softreset failed (device not ready)
- ata1: applying SB600 PMP SRST workaround and retrying
- ata3: softreset failed (device not ready)
- ata3: applying SB600 PMP SRST workaround and retrying
- Refined TSC clocksource calibration: 2806.372 MHz.
- Switching to clocksource tsc
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
- ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- ata3.00: ATAPI: ASUS DRW-22B1ST, 1.00, max UDMA/100
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- ata3.00: configured for UDMA/100
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 2:0:0:0: CD-ROM ASUS DRW-22B1ST 1.00 PQ: 0 ANSI: 5
- sda: sda1 sda2 < sda5 sda6 sda7 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pata_atiixp 0000:00:14.1: setting latency timer to 64
- scsi4 : pata_atiixp
- scsi5 : pata_atiixp
- ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- PM: Marking nosave pages: 000000000009e000 - 0000000000100000
- PM: Marking nosave pages: 00000000cff80000 - 0000000100000000
- PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
- PM: Basic memory bitmaps created
- PM: Basic memory bitmaps freed
- EXT3-fs: barriers not enabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda1): mounted filesystem with ordered data mode
- Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
- udev: starting version 153
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- ACPI: acpi_idle registered with cpuidle
- k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ohci_hcd 0000:00:12.0: OHCI Host Controller
- ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
- ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffe000
- EDAC MC: Ver: 2.1.0 Jun 4 2011
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- EDAC amd64_edac: v3.3.0
- IT8712 SuperIO detected.
- parport_pc 00:06: reported by Plug and Play ACPI
- parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: OHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.38.8-desktop-69mib ohci_hcd
- usb usb1: SerialNumber: 0000:00:12.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 3 ports detected
- ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ohci_hcd 0000:00:12.1: OHCI Host Controller
- ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
- ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffd000
- ppdev: user-space parallel port driver
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: OHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.38.8-desktop-69mib ohci_hcd
- usb usb2: SerialNumber: 0000:00:12.1
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 3 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:13.0: OHCI Host Controller
- ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffc000
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: OHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.38.8-desktop-69mib ohci_hcd
- usb usb3: SerialNumber: 0000:00:13.0
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 3 ports detected
- ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:13.1: OHCI Host Controller
- ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
- ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffb000
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: OHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.38.8-desktop-69mib ohci_hcd
- usb usb4: SerialNumber: 0000:00:13.1
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 3 ports detected
- ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:14.5: OHCI Host Controller
- ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ff9000
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: OHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.38.8-desktop-69mib ohci_hcd
- usb usb5: SerialNumber: 0000:00:14.5
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ehci_hcd 0000:00:12.2: EHCI Host Controller
- ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
- ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
- ehci_hcd 0000:00:12.2: debug port 1
- ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff000
- ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb6: Product: EHCI Host Controller
- usb usb6: Manufacturer: Linux 2.6.38.8-desktop-69mib ehci_hcd
- usb usb6: SerialNumber: 0000:00:12.2
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 6 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ehci_hcd 0000:00:13.2: EHCI Host Controller
- ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7
- ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
- ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7ffa800
- ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb7: Product: EHCI Host Controller
- usb usb7: Manufacturer: Linux 2.6.38.8-desktop-69mib ehci_hcd
- usb usb7: SerialNumber: 0000:00:13.2
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 6 ports detected
- EDAC amd64: DRAM ECC disabled.
- EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- EXT3-fs (sda1): using internal journal
- usb 2-2: new low speed USB device using ohci_hcd and address 2
- usb 2-2: New USB device found, idVendor=046d, idProduct=c051
- usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 2-2: Product: USB-PS/2 Optical Mouse
- usb 2-2: Manufacturer: Logitech
- input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2:1.0/input/input3
- generic-usb 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-2/input0
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- EXT3-fs: barriers not enabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda6): using internal journal
- EXT3-fs (sda6): mounted filesystem with ordered data mode
- EXT3-fs: barriers not enabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda7): using internal journal
- EXT3-fs (sda7): mounted filesystem with ordered data mode
- nvidia: module license 'NVIDIA' taints kernel.
- Disabling lock debugging due to kernel taint
- nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- nvidia 0000:01:00.0: setting latency timer to 64
- vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011
- it87: Found IT8712F chip at 0x290, revision 8
- ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [io 0x290-0x2af]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- Adding 5213180k swap on /dev/sda5. Priority:-1 extents:1 across:5213180k
- plasma-desktop[1109]: segfault at 60 ip 00007fdce4952d83 sp 00007fffddfb18e0 error 4 in libQtGui.so.4.7.4[7fdce452a000+a8b000]
- EDAC amd64_edac: v3.3.0
- EDAC amd64: DRAM ECC disabled.
- EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- SP5100 TCO timer: mmio address 0xfec000f0 already in use
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 2:0:0:0: Attached scsi generic sg1 type 5
- piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 2:0:0:0: Attached scsi CD-ROM sr0
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- r8169 0000:02:00.0: setting latency timer to 64
- r8169 0000:02:00.0: irq 42 for MSI/MSI-X
- r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc900113e0000, 00:24:8c:bc:15:1b, XID 1c4000c0 IRQ 42
- HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
- speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
- mono: mono_out=0x0
- dig-out=0x20/0x0
- inputs:
- HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- hda_intel: Disable MSI for Nvidia chipset
- HDA Intel 0000:01:00.1: setting latency timer to 64
- IPv6: Loaded, but administratively disabled, reboot required to enable
- r8169 0000:02:00.0: eth0: link down
- r8169 0000:02:00.0: eth0: link down
- r8169 0000:02:00.0: eth0: link up
- NET: Registered protocol family 17
- hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
- ip_tables: (C) 2000-2006 Netfilter Core Team
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- Netfilter messages via NETLINK v0.30.
- FS-Cache: Loaded
- FS-Cache: Netfs 'nfs' registered for caching
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- NFSD: starting 90-second grace period
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- ctnetlink v0.93: registering with nfnetlink.
- ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- ip_set: protocol 6
- xt_time: kernel timezone is +0100
- u32 classifier
- Actions configured
- netfilter PSD loaded - (c) astaro AG
- IFWLOG: register target
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement