Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@OpenWrt:/# cat /proc/cpuinfo
- system type : bcm63xx/96368M-1341N (0x6368/0x00B2)
- processor : 0
- cpu model : Broadcom BMIPS4350 V3.1
- BogoMIPS : 397.82
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : no
- ASEs implemented :
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 1
- cpu model : Broadcom BMIPS4350 V3.1
- BogoMIPS : 397.82
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : no
- ASEs implemented :
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- root@OpenWrt:/# uname -a
- Linux OpenWrt 3.3.8 #2 SMP Mon Nov 25 20:59:23 CET 2013 mips GNU/Linux
- -----------------------------------------------------------------------------------------------------
- BOOTLOG
- CFE version 1.0.37-105.22-1 for BCM96368 (32bit,SP,BE)
- Build Date: Fri Mar 19 11:53:33 CST 2010 (jojopo@broadcom_v060.comtrend.com)
- Copyright (C) 2000-2009 Broadcom Corporation.
- Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
- Total Flash size: 8192K with 135 sectors
- Chip ID: BCM6368B2, MIPS: 400MHz
- Main Thread: TP0
- Total Memory: 67108864 bytes (64MB)
- Boot Address: 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Board Id (0-14) : 96368M-1341N
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : 64:68:0c
- PSI Size (1-64) KBytes : 24
- Enable Backup PSI [0|1] : 0
- System Log Size (0-256) KBytes : 0
- Main Thread Number [0|1] : 0
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 0
- Booting from only image (0xb8010000) ...
- Code Address: 0x80010000, Entry Address: 0x80010000
- LZMA: Prossible old LZMA format, trying to decompress..
- Decompression OK!
- Entry at 0x80010000
- Closing network.
- Disabling Switch ports.
- Flushing Receive Buffers...
- 0 buffers found.
- Closing DMA Channels.
- Starting program at 0x80010000
- [ 0.000000] Linux version 3.3.8 (taxodium@debian) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 S3
- [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
- [ 0.000000] CPU frequency is 400 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] registering 38 GPIOs
- [ 0.000000] gpiochip_add: registered GPIOs 0 to 37 on device: bcm63xx-gpio
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-105.22
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.000000] board_bcm963xx: board name: 96368M-1341N
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00004000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00004000
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s4832 r8192 d15648 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Memory: 61332k/65536k available (2476k kernel code, 4204k reserved, 555k data, 192k init, 0k highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
- [ 0.032000] pid_max: default: 32768 minimum: 301
- [ 0.036000] Mount-cache hash table entries: 512
- [ 0.040000] SMP: Booting CPU1...
- [ 0.044000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.044000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.044000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.080000] SMP: CPU1 is running
- [ 0.080000] Brought up 2 CPUs
- [ 0.088000] NET: Registered protocol family 16
- [ 0.096000] registering PCI controller with io_map_base unset
- [ 0.108000] bio: create slab <bio-0> at 0
- [ 0.116000] PCI host bridge to bus 0000:00
- [ 0.120000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.128000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.148000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
- [ 0.152000] Switching to clocksource MIPS
- [ 0.160000] NET: Registered protocol family 2
- [ 0.164000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.172000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.180000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.188000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.192000] TCP reno registered
- [ 0.196000] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.204000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.208000] NET: Registered protocol family 1
- [ 0.216000] audit: initializing netlink socket (disabled)
- [ 0.220000] type=2000 audit(0.220:1): initialized
- [ 0.228000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.232000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.244000] msgmni has been set to 119
- [ 0.248000] io scheduler noop registered
- [ 0.252000] io scheduler deadline registered (default)
- �[ 0.268000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
- [ 0.268000] console [ttyS0] enabled, bootconsole disabled
- [ 0.280000] bcm63xx-rng bcm63xx-rng: registered RNG driver
- [ 0.288000] physmap platform flash device: 08000000 at 18000000
- [ 0.292000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
- [ 0.304000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.308000] Amd/Fujitsu Extended Query version 1.1.
- [ 0.316000] number of CFI chips: 1
- [ 0.320000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1341N
- [ 0.328000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
- [ 0.332000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
- [ 0.340000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 6c0000
- [ 0.348000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
- [ 0.356000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
- [ 0.364000] bcm63xxpart: Spare partition is offset 3b0004 and length 43fffc
- [ 0.372000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
- [ 0.376000] Creating 5 MTD partitions on "physmap-flash.0":
- [ 0.384000] 0x000000000000-0x000000010000 : "CFE"
- [ 0.392000] 0x000000010100-0x000000130000 : "kernel"
- [ 0.396000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- y
- [ 0.412000] 0x000000130000-0x0000007f0000 : "rootfs"
- [ 0.416000] mtd: partition "rootfs" set to be root filesystem
- [ 0.424000] mtd: partition "rootfs_data" created automatically, ofs=3B0000, len=440000
- [ 0.432000] 0x0000003b0000-0x0000007f0000 : "rootfs_data"
- [ 0.440000] 0x0000007f0000-0x000000800000 : "nvram"
- [ 0.448000] 0x000000010000-0x0000007f0000 : "linux"
- [ 0.456000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542) v0.1.2
- [ 0.496000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.508000] TCP cubic registered
- [ 0.508000] NET: Registered protocol family 17
- [ 0.516000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.524000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.532000] Freeing unused kernel memory: 192k freed
- awk: /proc/cpuinfo: No such file or directory
- [ 2.392000] roboswitch: Probing device eth0:
- [ 2.396000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
- [ 2.408000] Failed to enable switch
- [ 2.412000] roboswitch: Probing device eth1: No such device
- [ 2.416000] roboswitch: Probing device eth2: No such device
- [ 2.424000] roboswitch: Probing device eth3: No such device
- - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- - regular preinit -
- [ 7.876000] JFFS2 notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, .
- switching to jffs2
- - init -
- Please press Enter to activate this console. [ 15.156000] Loading modules backported from Linux version master-2013-06-27-05
- [ 15.164000] Backport generated by backports.git backports-20130617-4-ge3220f5
- [ 15.216000] cfg80211: Calling CRDA to update world regulatory domain
- [ 15.220000] cfg80211: World regulatory domain updated:
- [ 15.224000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 15.236000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 15.244000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 15.252000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 15.260000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 15.268000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 15.352000] There is already a switch registered on the device 'eth0'
- [ 15.356000] roboswitch: Probing device eth1: No such device
- [ 15.364000] roboswitch: Probing device eth2: No such device
- [ 15.368000] roboswitch: Probing device eth3: No such device
- [ 16.024000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
- [ 17.604000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc0300000, irq=21
- [ 17.612000] cfg80211: Calling CRDA for country: AW
- [ 17.616000] cfg80211: Regulatory domain changed to country: AW
- [ 17.624000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 17.632000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.640000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.648000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.656000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 17.680000] Button Hotplug driver version 0.4.1
- [ 17.924000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 18.084000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
- [ 18.316000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
- [ 21.988000] device eth0 entered promiscuous mode
- [ 21.996000] br-lan: port 1(eth0) entered forwarding state
- [ 22.000000] br-lan: port 1(eth0) entered forwarding state
- [ 24.004000] br-lan: port 1(eth0) entered forwarding state
- BusyBox v1.19.4 (2013-11-25 20:06:26 CET) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- ATTITUDE ADJUSTMENT (Attitude Adjustment, unknown)
- -----------------------------------------------------
- * 1/4 oz Vodka Pour all ingredients into mixing
- * 1/4 oz Gin tin with ice, strain into glass.
- * 1/4 oz Amaretto
- * 1/4 oz Triple sec
- * 1/4 oz Peach schnapps
- * 1/4 oz Sour mix
- * 1 splash Cranberry juice
- -----------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement