Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
- [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=c97278c1-8578-41f4-8273-c95eb66199dc ro quiet splash elevator=deadline
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
- [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
- [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
- [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000040200000 - 00000000aeb53000 (usable)
- [ 0.000000] BIOS-e820: 00000000aeb53000 - 00000000aeba5000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000aeba5000 - 00000000aee08000 (reserved)
- [ 0.000000] BIOS-e820: 00000000aee08000 - 00000000aee09000 (usable)
- [ 0.000000] BIOS-e820: 00000000aee09000 - 00000000aee0c000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000aee0c000 - 00000000aee0d000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000aee0d000 - 00000000aee17000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000aee17000 - 00000000aee3c000 (reserved)
- [ 0.000000] BIOS-e820: 00000000aee3c000 - 00000000aee7f000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000aee7f000 - 00000000af000000 (usable)
- [ 0.000000] BIOS-e820: 00000000af800000 - 00000000bfa00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3, BIOS P1.40 06/21/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask E00000000 write-back
- [ 0.000000] 1 base 200000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
- [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
- [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 5 base 23FE00000 mask FFFE00000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xaf000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000fcf10] fcf10
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000af000000
- [ 0.000000] 0000000000 - 00af000000 page 2M
- [ 0.000000] kernel direct mapping tables up to af000000 @ 1fffc000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
- [ 0.000000] 0100000000 - 023fe00000 page 2M
- [ 0.000000] kernel direct mapping tables up to 23fe00000 @ aeff6000-af000000
- [ 0.000000] RAMDISK: 36696000 - 37343000
- [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 00000000aeb9d068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 00000000aeba43c0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 00000000aeb9d150 0726A (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000aee0ef80 00040
- [ 0.000000] ACPI: APIC 00000000aeba44b8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: SSDT 00000000aeba4530 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
- [ 0.000000] ACPI: MCFG 00000000aeba4638 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: AAFT 00000000aeba4678 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000aeba4750 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000023fe00000
- [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
- [ 0.000000] NODE_DATA [000000023fdfb000 - 000000023fdfffff]
- [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237800000-ffff88023e5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x0023fe00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[7] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x00020000
- [ 0.000000] 0: 0x00020200 -> 0x00040000
- [ 0.000000] 0: 0x00040200 -> 0x000aeb53
- [ 0.000000] 0: 0x000aee08 -> 0x000aee09
- [ 0.000000] 0: 0x000aee7f -> 0x000af000
- [ 0.000000] 0: 0x00100000 -> 0x0023fe00
- [ 0.000000] On node 0 totalpages: 2025058
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3920 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 696589 pages, LIFO batch:31
- [ 0.000000] Normal zone: 17913 pages used for memmap
- [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
- [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
- [ 0.000000] PM: Registered nosave memory: 00000000aeb53000 - 00000000aeba5000
- [ 0.000000] PM: Registered nosave memory: 00000000aeba5000 - 00000000aee08000
- [ 0.000000] PM: Registered nosave memory: 00000000aee09000 - 00000000aee0c000
- [ 0.000000] PM: Registered nosave memory: 00000000aee0c000 - 00000000aee0d000
- [ 0.000000] PM: Registered nosave memory: 00000000aee0d000 - 00000000aee17000
- [ 0.000000] PM: Registered nosave memory: 00000000aee17000 - 00000000aee3c000
- [ 0.000000] PM: Registered nosave memory: 00000000aee3c000 - 00000000aee7f000
- [ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000af800000
- [ 0.000000] PM: Registered nosave memory: 00000000af800000 - 00000000bfa00000
- [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
- [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
- [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s82880 r8192 d23616 u524288
- [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992804
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=c97278c1-8578-41f4-8273-c95eb66199dc ro quiet splash elevator=deadline
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 7899568k/9435136k available (3416k kernel code, 1334904k absent, 200664k reserved, 3319k data, 576k init)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:33024 nr_irqs:712 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 3299.892 MHz processor.
- [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.78 BogoMIPS (lpj=13199568)
- [ 0.000004] pid_max: default: 32768 minimum: 301
- [ 0.000028] Security Framework initialized
- [ 0.000031] AppArmor: AppArmor disabled by boot time parameter
- [ 0.000367] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.001542] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.002037] Mount-cache hash table entries: 256
- [ 0.002105] Initializing cgroup subsys cpuacct
- [ 0.002107] Initializing cgroup subsys memory
- [ 0.002115] Initializing cgroup subsys devices
- [ 0.002117] Initializing cgroup subsys freezer
- [ 0.002118] Initializing cgroup subsys net_cls
- [ 0.002119] Initializing cgroup subsys blkio
- [ 0.002123] Initializing cgroup subsys perf_event
- [ 0.002142] CPU: Physical Processor ID: 0
- [ 0.002143] CPU: Processor Core ID: 0
- [ 0.002146] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.002147] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.002149] mce: CPU supports 9 MCE banks
- [ 0.002159] CPU0: Thermal monitoring enabled (TM1)
- [ 0.002163] using mwait in idle threads.
- [ 0.002489] ACPI: Core revision 20110623
- [ 0.008597] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.048241] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.152237] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
- [ 0.152241] PEBS disabled due to CPU errata.
- [ 0.152243] ... version: 3
- [ 0.152244] ... bit width: 48
- [ 0.152244] ... generic registers: 8
- [ 0.152245] ... value mask: 0000ffffffffffff
- [ 0.152246] ... max period: 000000007fffffff
- [ 0.152247] ... fixed-purpose events: 3
- [ 0.152248] ... event mask: 00000007000000ff
- [ 0.152327] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.152391] Booting Node 0, Processors #1
- [ 0.152392] smpboot cpu 1: start_ip = 98000
- [ 0.260205] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.260273] #2
- [ 0.260273] smpboot cpu 2: start_ip = 98000
- [ 0.368082] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.368148] #3 Ok.
- [ 0.368149] smpboot cpu 3: start_ip = 98000
- [ 0.475958] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.475978] Brought up 4 CPUs
- [ 0.475979] Total of 4 processors activated (26399.12 BogoMIPS).
- [ 0.478320] devtmpfs: initialized
- [ 0.480414] PM: Registering ACPI NVS region at aeb53000 (335872 bytes)
- [ 0.480424] PM: Registering ACPI NVS region at aee09000 (12288 bytes)
- [ 0.480426] PM: Registering ACPI NVS region at aee0d000 (40960 bytes)
- [ 0.480428] PM: Registering ACPI NVS region at aee3c000 (274432 bytes)
- [ 0.480526] print_constraints: dummy:
- [ 0.480562] NET: Registered protocol family 16
- [ 0.480621] ACPI: bus type pci registered
- [ 0.480666] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.480668] PCI: not using MMCONFIG
- [ 0.480669] PCI: Using configuration type 1 for base access
- [ 0.481176] bio: create slab <bio-0> at 0
- [ 0.481232] ACPI: Added _OSI(Module Device)
- [ 0.481233] ACPI: Added _OSI(Processor Device)
- [ 0.481234] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.481236] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.481908] ACPI: EC: Look up EC in DSDT
- [ 0.482607] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.485131] ACPI: SSDT 00000000aee0dc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.485340] ACPI: Dynamic OEM Table Load:
- [ 0.485342] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.485360] ACPI: SSDT 00000000aee0ee18 00084 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.485517] ACPI: Dynamic OEM Table Load:
- [ 0.485518] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.485894] ACPI: Interpreter enabled
- [ 0.485897] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.485912] ACPI: Using IOAPIC for interrupt routing
- [ 0.485928] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.485980] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.507795] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.511447] ACPI: No dock devices found.
- [ 0.511448] HEST: Table not found.
- [ 0.511451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.511601] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.511770] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.511772] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.511773] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.511774] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
- [ 0.511776] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
- [ 0.511779] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cdbff])
- [ 0.511786] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
- [ 0.511813] pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
- [ 0.511820] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
- [ 0.511825] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.511828] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.511889] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
- [ 0.511919] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit]
- [ 0.512022] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.512066] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
- [ 0.512094] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff]
- [ 0.512219] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.512254] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
- [ 0.512274] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
- [ 0.512373] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.512403] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
- [ 0.512515] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.512552] pci 0000:00:1c.4: [8086:244e] type 1 class 0x000604
- [ 0.512664] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.512698] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
- [ 0.512810] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.512843] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
- [ 0.512954] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.512987] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
- [ 0.513099] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 0.513138] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
- [ 0.513165] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff]
- [ 0.513291] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.513323] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
- [ 0.513488] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
- [ 0.513515] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.513525] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.513536] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
- [ 0.513546] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
- [ 0.513557] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
- [ 0.513567] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff]
- [ 0.513635] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.513659] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
- [ 0.513680] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit]
- [ 0.513708] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.513805] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.513895] pci 0000:02:00.0: [1b21:1080] type 1 class 0x000604
- [ 0.514042] pci 0000:00:1c.4: PCI bridge to [bus 02-03] (subtractive decode)
- [ 0.514055] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.514057] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.514058] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.514060] pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
- [ 0.514195] pci 0000:02:00.0: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.514221] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.514223] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.514224] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.514226] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.514227] pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.514229] pci 0000:02:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.514231] pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.514232] pci 0000:02:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
- [ 0.514333] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
- [ 0.514356] pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff]
- [ 0.514398] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.514424] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.514538] pci 0000:04:00.0: supports D1 D2
- [ 0.514539] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.519886] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
- [ 0.519892] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 0.519905] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.520005] pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03
- [ 0.520037] pci 0000:05:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit]
- [ 0.520193] pci 0000:05:00.0: supports D1 D2
- [ 0.520194] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.527876] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
- [ 0.527885] pci 0000:00:1c.6: bridge window [mem 0xfe400000-0xfe4fffff]
- [ 0.527966] pci 0000:00:1c.7: PCI bridge to [bus 06-06]
- [ 0.528011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.528113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.528142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 0.528167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT]
- [ 0.528203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
- [ 0.528228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
- [ 0.528251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
- [ 0.528343] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.528513] pci0000:00: ACPI _OSC control (0x1c) granted
- [ 0.531571] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.531604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.531636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.531667] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.531697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.531729] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.531760] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.531791] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.531854] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.531860] vgaarb: loaded
- [ 0.531860] vgaarb: bridge control possible 0000:00:02.0
- [ 0.531885] PCI: Using ACPI for IRQ routing
- [ 0.542017] PCI: pci_cache_line_size set to 64 bytes
- [ 0.542083] reserve RAM buffer: 000000000009d800 - 000000000009ffff
- [ 0.542084] reserve RAM buffer: 00000000aeb53000 - 00000000afffffff
- [ 0.542087] reserve RAM buffer: 00000000aee09000 - 00000000afffffff
- [ 0.542090] reserve RAM buffer: 00000000af000000 - 00000000afffffff
- [ 0.542091] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
- [ 0.542162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.542165] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.544177] Switching to clocksource hpet
- [ 0.545246] pnp: PnP ACPI init
- [ 0.545255] ACPI: bus type pnp registered
- [ 0.545349] pnp 00:00: [bus 00-ff]
- [ 0.545350] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.545352] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.545354] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.545355] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.545356] pnp 00:00: [mem 0x000c8000-0x000dffff window]
- [ 0.545358] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
- [ 0.545359] pnp 00:00: [mem 0x00000000 window]
- [ 0.545385] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.545426] pnp 00:01: [mem 0xfed10000-0xfed19fff]
- [ 0.545427] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.545428] pnp 00:01: [mem 0xfed90000-0xfed93fff]
- [ 0.545429] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
- [ 0.545430] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
- [ 0.545455] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
- [ 0.545457] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.545458] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.545460] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.545462] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
- [ 0.545463] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.545503] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.545504] pnp 00:02: [io 0x0290-0x029f]
- [ 0.545506] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.545528] system 00:02: [io 0x0290-0x029f] has been reserved
- [ 0.545530] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.545702] pnp 00:03: [dma 4]
- [ 0.545703] pnp 00:03: [io 0x0000-0x000f]
- [ 0.545705] pnp 00:03: [io 0x0081-0x0083]
- [ 0.545706] pnp 00:03: [io 0x0087]
- [ 0.545707] pnp 00:03: [io 0x0089-0x008b]
- [ 0.545708] pnp 00:03: [io 0x008f]
- [ 0.545709] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.545724] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.545730] pnp 00:04: [io 0x0070-0x0071]
- [ 0.545736] pnp 00:04: [irq 8]
- [ 0.545750] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.545755] pnp 00:05: [io 0x0061]
- [ 0.545769] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.545780] pnp 00:06: [io 0x0010-0x001f]
- [ 0.545781] pnp 00:06: [io 0x0022-0x003f]
- [ 0.545782] pnp 00:06: [io 0x0044-0x005f]
- [ 0.545783] pnp 00:06: [io 0x0062-0x0063]
- [ 0.545784] pnp 00:06: [io 0x0065-0x006f]
- [ 0.545785] pnp 00:06: [io 0x0072-0x007f]
- [ 0.545786] pnp 00:06: [io 0x0080]
- [ 0.545788] pnp 00:06: [io 0x0084-0x0086]
- [ 0.545789] pnp 00:06: [io 0x0088]
- [ 0.545790] pnp 00:06: [io 0x008c-0x008e]
- [ 0.545791] pnp 00:06: [io 0x0090-0x009f]
- [ 0.545792] pnp 00:06: [io 0x00a2-0x00bf]
- [ 0.545793] pnp 00:06: [io 0x00e0-0x00ef]
- [ 0.545794] pnp 00:06: [io 0x04d0-0x04d1]
- [ 0.545819] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.545821] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.545827] pnp 00:07: [io 0x00f0-0x00ff]
- [ 0.545831] pnp 00:07: [irq 13]
- [ 0.545845] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.546055] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.546059] pnp 00:08: [irq 4]
- [ 0.546061] pnp 00:08: [dma 0 disabled]
- [ 0.546101] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.546229] pnp 00:09: [io 0x0400-0x0453]
- [ 0.546230] pnp 00:09: [io 0x0458-0x047f]
- [ 0.546231] pnp 00:09: [io 0x1180-0x119f]
- [ 0.546233] pnp 00:09: [io 0x0500-0x057f]
- [ 0.546234] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- [ 0.546235] pnp 00:09: [mem 0xfec00000-0xfecfffff]
- [ 0.546236] pnp 00:09: [mem 0xfed08000-0xfed08fff]
- [ 0.546237] pnp 00:09: [mem 0xff000000-0xffffffff]
- [ 0.546262] system 00:09: [io 0x0400-0x0453] has been reserved
- [ 0.546263] system 00:09: [io 0x0458-0x047f] has been reserved
- [ 0.546265] system 00:09: [io 0x1180-0x119f] has been reserved
- [ 0.546267] system 00:09: [io 0x0500-0x057f] has been reserved
- [ 0.546269] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.546271] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
- [ 0.546273] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 0.546275] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.546276] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.546302] pnp 00:0a: [io 0x0454-0x0457]
- [ 0.546326] system 00:0a: [io 0x0454-0x0457] has been reserved
- [ 0.546328] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.546402] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
- [ 0.546425] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.546536] pnp: PnP ACPI: found 12 devices
- [ 0.546537] ACPI: ACPI bus type pnp unregistered
- [ 0.552316] PCI: max bus depth: 2 pci_try_num: 3
- [ 0.552381] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.552395] pci 0000:02:00.0: PCI bridge to [bus 03-03]
- [ 0.552418] pci 0000:00:1c.4: PCI bridge to [bus 02-03]
- [ 0.552433] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
- [ 0.552436] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 0.552444] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.552452] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
- [ 0.552457] pci 0000:00:1c.6: bridge window [mem 0xfe400000-0xfe4fffff]
- [ 0.552467] pci 0000:00:1c.7: PCI bridge to [bus 06-06]
- [ 0.552493] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.552502] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.552514] pci 0000:02:00.0: setting latency timer to 64
- [ 0.552524] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.552534] pci 0000:00:1c.6: setting latency timer to 64
- [ 0.552544] pci 0000:00:1c.7: setting latency timer to 64
- [ 0.552547] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.552549] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.552550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.552551] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
- [ 0.552553] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
- [ 0.552554] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
- [ 0.552555] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.552557] pci_bus 0000:02: resource 7 [mem 0xbfa00000-0xffffffff]
- [ 0.552558] pci_bus 0000:03: resource 8 [io 0x0000-0x0cf7]
- [ 0.552559] pci_bus 0000:03: resource 9 [io 0x0d00-0xffff]
- [ 0.552560] pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.552562] pci_bus 0000:03: resource 11 [mem 0xbfa00000-0xffffffff]
- [ 0.552563] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
- [ 0.552565] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.552566] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
- [ 0.552612] NET: Registered protocol family 2
- [ 0.552734] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.553285] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.554156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.554266] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.554267] TCP reno registered
- [ 0.554276] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.554299] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.554380] NET: Registered protocol family 1
- [ 0.554389] pci 0000:00:02.0: Boot video device
- [ 0.807998] PCI: CLS 64 bytes, default 64
- [ 0.808028] Unpacking initramfs...
- [ 2.806659] Freeing initrd memory: 12980k freed
- [ 2.807730] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.807733] Placing 64MB software IO TLB between ffff8800aab53000 - ffff8800aeb53000
- [ 2.807735] software IO TLB at phys 0xaab53000 - 0xaeb53000
- [ 2.808076] audit: initializing netlink socket (disabled)
- [ 2.808083] type=2000 audit(1382261389.656:1): initialized
- [ 2.817734] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 2.818273] VFS: Disk quotas dquot_6.5.2
- [ 2.818293] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.818341] msgmni has been set to 15454
- [ 2.818449] alg: No test for stdrng (krng)
- [ 2.818471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.818473] io scheduler noop registered
- [ 2.818475] io scheduler deadline registered (default)
- [ 2.818488] io scheduler cfq registered
- [ 2.818548] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 2.818606] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 2.818688] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 2.818741] pcieport 0000:00:1c.5: irq 41 for MSI/MSI-X
- [ 2.818821] pcieport 0000:00:1c.6: setting latency timer to 64
- [ 2.818875] pcieport 0000:00:1c.6: irq 42 for MSI/MSI-X
- [ 2.818955] pcieport 0000:00:1c.7: setting latency timer to 64
- [ 2.819008] pcieport 0000:00:1c.7: irq 43 for MSI/MSI-X
- [ 2.819106] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 2.819111] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 2.819129] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
- [ 2.819131] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- [ 2.819135] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
- [ 2.819153] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
- [ 2.819154] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
- [ 2.819158] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
- [ 2.819177] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
- [ 2.819181] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
- [ 2.819191] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.819206] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.819207] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 2.819422] intel_idle: MWAIT substates: 0x1120
- [ 2.819423] intel_idle: v0.4 model 0x2A
- [ 2.819424] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 2.819443] ERST: Table is not found!
- [ 2.819444] GHES: HEST is not enabled!
- [ 2.819480] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.839863] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 3.038304] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 3.038485] Linux agpgart interface v0.103
- [ 3.038531] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
- [ 3.038587] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 3.039276] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
- [ 3.039354] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 3.039430] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 3.042052] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.042057] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 3.042140] mousedev: PS/2 mouse device common for all mice
- [ 3.042174] rtc_cmos 00:04: RTC can wake from S4
- [ 3.042266] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 3.042293] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 3.042342] cpuidle: using governor ladder
- [ 3.042399] cpuidle: using governor menu
- [ 3.042509] TCP cubic registered
- [ 3.042699] NET: Registered protocol family 10
- [ 3.043092] Mobile IPv6
- [ 3.043093] NET: Registered protocol family 17
- [ 3.043095] Registering the dns_resolver key type
- [ 3.043295] PM: Hibernation image not present or could not be loaded.
- [ 3.043303] registered taskstats version 1
- [ 3.043807] rtc_cmos 00:04: setting system clock to 2013-10-20 09:29:50 UTC (1382261390)
- [ 3.043848] Initializing network drop monitor service
- [ 3.044556] Freeing unused kernel memory: 576k freed
- [ 3.044605] Write protecting the kernel read-only data: 6144k
- [ 3.046214] Freeing unused kernel memory: 664k freed
- [ 3.047779] Freeing unused kernel memory: 680k freed
- [ 3.088224] udevd[62]: starting version 175
- [ 3.094814] [drm] Initialized drm 1.1.0 20060810
- [ 3.095247] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 3.095251] ACPI: Power Button [PWRB]
- [ 3.095284] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 3.095287] ACPI: Power Button [PWRF]
- [ 3.096187] usbcore: registered new interface driver usbfs
- [ 3.096202] usbcore: registered new interface driver hub
- [ 3.097657] i915 0000:00:02.0: setting latency timer to 64
- [ 3.102254] usbcore: registered new device driver usb
- [ 3.102495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.104424] SCSI subsystem initialized
- [ 3.105353] xhci_hcd 0000:05:00.0: setting latency timer to 64
- [ 3.105357] xhci_hcd 0000:05:00.0: xHCI Host Controller
- [ 3.105371] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
- [ 3.105496] xhci_hcd 0000:05:00.0: irq 18, io mem 0xfe400000
- [ 3.105519] xhci_hcd 0000:05:00.0: Failed to enable MSI-X
- [ 3.105651] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
- [ 3.105726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.105728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.105729] usb usb1: Product: xHCI Host Controller
- [ 3.105731] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
- [ 3.105732] usb usb1: SerialNumber: 0000:05:00.0
- [ 3.105784] xHCI xhci_add_endpoint called for root hub
- [ 3.105785] xHCI xhci_check_bandwidth called for root hub
- [ 3.105804] hub 1-0:1.0: USB hub found
- [ 3.105810] hub 1-0:1.0: 2 ports detected
- [ 3.105855] xhci_hcd 0000:05:00.0: xHCI Host Controller
- [ 3.105858] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
- [ 3.105872] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 3.105873] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.105875] usb usb2: Product: xHCI Host Controller
- [ 3.105876] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
- [ 3.105877] usb usb2: SerialNumber: 0000:05:00.0
- [ 3.105918] xHCI xhci_add_endpoint called for root hub
- [ 3.105919] xHCI xhci_check_bandwidth called for root hub
- [ 3.105936] hub 2-0:1.0: USB hub found
- [ 3.105942] hub 2-0:1.0: 2 ports detected
- [ 3.106211] libata version 3.00 loaded.
- [ 3.107733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 3.107781] r8169 0000:04:00.0: setting latency timer to 64
- [ 3.107879] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
- [ 3.113086] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7e000, 00:25:22:d2:b1:2d, XID 0c900800 IRQ 45
- [ 3.113089] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 3.113395] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
- [ 3.133410] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
- [ 3.133412] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 3.133596] i915 0000:00:02.0: irq 46 for MSI/MSI-X
- [ 3.133600] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 3.133601] [drm] Driver supports precise vblank timestamp query.
- [ 3.133623] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 3.469667] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
- [ 3.493105] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.494355] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.495602] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.496851] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.497383] usb 2-2: New USB device found, idVendor=174c, idProduct=55aa
- [ 3.497386] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 3.497387] usb 2-2: Product: Silicon-Power
- [ 3.497388] usb 2-2: Manufacturer: PHD 3.0
- [ 3.497389] usb 2-2: SerialNumber: 201204SK0476099#001D
- [ 3.499293] usbcore: registered new interface driver uas
- [ 3.499796] Initializing USB Mass Storage driver...
- [ 3.499975] scsi0 : usb-storage 2-2:1.0
- [ 3.500066] usbcore: registered new interface driver usb-storage
- [ 3.500067] USB Mass Storage support registered.
- [ 3.746849] fbcon: inteldrmfb (fb0) is primary device
- [ 3.805018] Refined TSC clocksource calibration: 3300.022 MHz.
- [ 3.805021] Switching to clocksource tsc
- [ 3.920695] Console: switching to colour frame buffer device 240x67
- [ 3.925255] fb0: inteldrmfb frame buffer device
- [ 3.925256] drm: registered panic notifier
- [ 3.925263] No ACPI video bus found
- [ 3.925293] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 3.925354] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 3.925358] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 3.925366] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 3.925394] ehci_hcd 0000:00:1a.0: debug port 2
- [ 3.929287] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 3.929301] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe507000
- [ 3.944880] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 3.944899] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.944911] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.944912] usb usb3: Product: EHCI Host Controller
- [ 3.944913] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
- [ 3.944914] usb usb3: SerialNumber: 0000:00:1a.0
- [ 3.945036] hub 3-0:1.0: USB hub found
- [ 3.945040] hub 3-0:1.0: 2 ports detected
- [ 3.945135] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 3.945138] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 3.945143] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
- [ 3.945166] ehci_hcd 0000:00:1d.0: debug port 2
- [ 3.949043] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 3.949055] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe506000
- [ 3.964855] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 3.964871] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.964873] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.964874] usb usb4: Product: EHCI Host Controller
- [ 3.964876] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
- [ 3.964877] usb usb4: SerialNumber: 0000:00:1d.0
- [ 3.965027] hub 4-0:1.0: USB hub found
- [ 3.965031] hub 4-0:1.0: 2 ports detected
- [ 3.965101] ahci 0000:00:1f.2: version 3.0
- [ 3.965178] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
- [ 3.980880] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 3.980883] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
- [ 3.980887] ahci 0000:00:1f.2: setting latency timer to 64
- [ 4.021197] scsi1 : ahci
- [ 4.021311] scsi2 : ahci
- [ 4.021429] scsi3 : ahci
- [ 4.021548] scsi4 : ahci
- [ 4.021643] scsi5 : ahci
- [ 4.021742] scsi6 : ahci
- [ 4.021862] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 47
- [ 4.021864] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 47
- [ 4.021867] ata3: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505200 irq 47
- [ 4.021869] ata4: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505280 irq 47
- [ 4.021872] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 47
- [ 4.021874] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 47
- [ 4.256585] usb 3-1: new high-speed USB device number 2 using ehci_hcd
- [ 4.340506] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.340537] ata6: SATA link down (SStatus 0 SControl 300)
- [ 4.340561] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4.340577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.340594] ata4: SATA link down (SStatus 0 SControl 300)
- [ 4.340952] ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
- [ 4.340954] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 4.341141] ata2.00: ATA-8: ST33000651AS, CC45, max UDMA/133
- [ 4.341143] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 4.341382] ata1.00: configured for UDMA/100
- [ 4.341535] scsi 1:0:0:0: Direct-Access ATA M4-CT128M4SSD2 070H PQ: 0 ANSI: 5
- [ 4.341802] ata2.00: configured for UDMA/133
- [ 4.341935] scsi 2:0:0:0: Direct-Access ATA ST33000651AS CC45 PQ: 0 ANSI: 5
- [ 4.342153] ata5.00: ATAPI: Optiarc DVD RW AD-7283S, 1.01, max UDMA/100
- [ 4.344351] ata5.00: configured for UDMA/100
- [ 4.344514] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.345585] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7283S 1.01 PQ: 0 ANSI: 5
- [ 4.347988] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 4.348010] sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 4.348020] sd 1:0:0:0: [sda] Write Protect is off
- [ 4.348021] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.348031] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.348041] sd 2:0:0:0: [sdb] Write Protect is off
- [ 4.348043] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 4.348055] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.348637] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 4.349142] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 4.349630] sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.349632] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 4.349735] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 4.388803] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
- [ 4.388806] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.389081] hub 3-1:1.0: USB hub found
- [ 4.389175] hub 3-1:1.0: 6 ports detected
- [ 4.401484] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 4.401512] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 4.401603] sr 5:0:0:0: Attached scsi generic sg2 type 5
- [ 4.411841] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
- [ 4.412227] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 4.497663] scsi 0:0:0:0: Direct-Access PHD 3.0 Silicon-Power 2AR1 PQ: 0 ANSI: 5
- [ 4.497934] sd 0:0:0:0: Attached scsi generic sg3 type 0
- [ 4.498101] sd 0:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 4.498212] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.498679] sd 0:0:0:0: [sdc] Write Protect is off
- [ 4.498680] sd 0:0:0:0: [sdc] Mode Sense: 23 00 00 00
- [ 4.498790] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.499431] sd 0:0:0:0: [sdc] No Caching mode page present
- [ 4.499469] sd 0:0:0:0: [sdc] Assuming drive cache: write through
- [ 4.499837] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.500344] usb 4-1: new high-speed USB device number 2 using ehci_hcd
- [ 4.500590] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.501452] sd 0:0:0:0: [sdc] No Caching mode page present
- [ 4.501487] sd 0:0:0:0: [sdc] Assuming drive cache: write through
- [ 4.501683] sdc: sdc1
- [ 4.502201] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.502907] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.503674] sd 0:0:0:0: [sdc] No Caching mode page present
- [ 4.503711] sd 0:0:0:0: [sdc] Assuming drive cache: write through
- [ 4.503734] sd 0:0:0:0: [sdc] Attached SCSI disk
- [ 4.510041] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.511510] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.512121] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 4.632566] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
- [ 4.632569] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.632854] hub 4-1:1.0: USB hub found
- [ 4.632921] hub 4-1:1.0: 8 ports detected
- [ 4.912019] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
- [ 5.020660] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=1006
- [ 5.020662] usb 4-1.5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
- [ 5.020664] usb 4-1.5: Product: USB2.0 WLAN
- [ 5.020665] usb 4-1.5: Manufacturer: ATHEROS
- [ 5.020666] usb 4-1.5: SerialNumber: 12345
- [ 5.091868] usb 4-1.6: new high-speed USB device number 4 using ehci_hcd
- [ 5.184250] usb 4-1.6: New USB device found, idVendor=1a40, idProduct=0101
- [ 5.184252] usb 4-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 5.184254] usb 4-1.6: Product: USB 2.0 Hub [MTT]
- [ 5.184523] hub 4-1.6:1.0: USB hub found
- [ 5.184623] hub 4-1.6:1.0: 4 ports detected
- [ 5.455504] usb 4-1.6.2: new full-speed USB device number 5 using ehci_hcd
- [ 5.550391] usb 4-1.6.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 5.550394] usb 4-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.550396] usb 4-1.6.2: Product: USB Receiver
- [ 5.550397] usb 4-1.6.2: Manufacturer: Logitech
- [ 5.552970] usbcore: registered new interface driver usbhid
- [ 5.552971] usbhid: USB HID core driver
- [ 5.556410] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6.2/input2
- [ 5.558999] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.2/4-1.6.2:1.2/0003:046D:C52B.0003/input/input2
- [ 5.559061] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.0-1.6.2:1
- [ 5.561060] input: Logitech Unifying Device. Wireless PID:4004 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.2/4-1.6.2:1.2/0003:046D:C52B.0003/input/input3
- [ 5.561111] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:1d.0-1.6.2:2
- [ 5.623351] usb 4-1.6.3: new low-speed USB device number 6 using ehci_hcd
- [ 5.735712] usb 4-1.6.3: New USB device found, idVendor=09da, idProduct=0260
- [ 5.735715] usb 4-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.735717] usb 4-1.6.3: Product: USB Keyboard
- [ 5.735718] usb 4-1.6.3: Manufacturer:
- [ 5.746457] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.3/4-1.6.3:1.0/input/input4
- [ 5.746521] generic-usb 0003:09DA:0260.0006: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.6.3/input0
- [ 5.765385] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.3/4-1.6.3:1.1/input/input5
- [ 5.765473] generic-usb 0003:09DA:0260.0007: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.6.3/input1
- [ 6.112866] uvesafb: Intel Corporation, Intel(R)Sandybridge Desktop Graphics Controller, Hardware Version 0.0, OEM: Intel(R)Sandybridge Desktop Graphics Chipset Accelerated VGA BIOS, VBE v3.0
- [ 6.130000] uvesafb: VBIOS/hardware supports DDC2 transfers
- [ 6.142388] uvesafb: monitor limits: vf = 76 Hz, hf = 83 kHz, clk = 210 MHz
- [ 6.142495] uvesafb: scrolling: redraw
- [ 6.142501] mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
- [ 6.142503] mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
- [ 6.142505] mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
- [ 6.142507] mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
- [ 6.142509] mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
- [ 6.142511] mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
- [ 6.142512] mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
- [ 6.142514] mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
- [ 6.142516] mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
- [ 6.142518] mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
- [ 6.142519] mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
- [ 6.142521] mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
- [ 6.142523] mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
- [ 6.142525] mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
- [ 6.144636] uvesafb: framebuffer at 0xc0000000, mapped to 0xffffc90022880000, using 21600k, total 262080k
- [ 6.144638] fb1: VESA VGA frame buffer device
- [ 6.145711] vga16fb: initializing
- [ 6.145713] vga16fb: mapped to 0xffff8800000a0000
- [ 6.145744] fb2: VGA16 VGA frame buffer device
- [ 7.208943] Btrfs loaded
- [ 7.576336] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.820450] udevd[482]: starting version 175
- [ 7.881194] ACPI: Requesting acpi_cpufreq
- [ 7.894196] iTCO_vendor_support: vendor-support=0
- [ 7.895029] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- [ 7.895086] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
- [ 7.895133] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 7.899418] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 7.921317] udevd[541]: renamed network interface eth0 to eth1
- [ 7.922410] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
- [ 7.922435] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 7.926940] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.932522] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 7.934097] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 7.934649] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 7.954975] cfg80211: World regulatory domain updated:
- [ 7.954977] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 7.954989] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.954990] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.954992] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.954993] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.954995] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.041275] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 8.228276] usb 4-1.5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
- [ 8.463295] ath9k_htc 4-1.5:1.0: ath9k_htc: HTC initialized with 33 credits
- [ 8.477269] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 8.477458] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
- [ 8.477586] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 8.477700] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 8.478139] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 8.649613] ath9k_htc 4-1.5:1.0: ath9k_htc: FW Version: 1.3
- [ 8.649616] ath: EEPROM regdomain: 0x809c
- [ 8.649617] ath: EEPROM indicates we should expect a country code
- [ 8.649618] ath: doing EEPROM country->regdmn map search
- [ 8.649619] ath: country maps to regdmn code: 0x52
- [ 8.649621] ath: Country alpha2 being used: CN
- [ 8.649622] ath: Regpair used: 0x52
- [ 8.652249] ieee80211 phy0: Atheros AR9271 Rev:1
- [ 8.652257] cfg80211: Calling CRDA for country: CN
- [ 8.653001] Registered led device: ath9k_htc-phy0
- [ 8.653004] usb 4-1.5: ath9k_htc: USB layer initialized
- [ 8.653019] usbcore: registered new interface driver ath9k_htc
- [ 8.655242] cfg80211: Regulatory domain changed to country: CN
- [ 8.655249] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 8.655251] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 8.655253] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
- [ 8.655260] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
- [ 8.655261] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
- [ 8.655263] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
- [ 8.894225] Adding 8388604k swap on /dev/sda6. Priority:-1 extents:1 across:8388604k SS
- [ 8.905742] EXT4-fs (sda5): re-mounted. Opts: (null)
- [ 8.983210] EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro
- [ 9.079754] device-mapper: uevent: version 1.0.3
- [ 9.079801] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 9.249053] fuse init (API version 7.17)
- [ 9.265839] loop: module loaded
- [ 9.283179] i2c /dev entries driver
- [ 9.318129] EXT2-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended
- [ 9.359052] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 9.387405] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 9.507860] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 9.646598] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 10.566040] vboxdrv: Found 4 processor cores.
- [ 10.566496] vboxdrv: fAsync=0 offMin=0x1c5 offMax=0xb79
- [ 10.566536] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 10.566537] vboxdrv: Successfully loaded version 4.2.16_Debian (interface 0x001a0005).
- [ 10.596921] vboxpci: IOMMU not found (not registered)
- [ 10.613060] dictd[2805]: segfault at ffffffffffffffff ip 00007f828ae34254 sp 00007fffc77f6180 error 4 in libc-2.17.so[7f828ade9000+1a2000]
- [ 10.669437] /dev/vmmon[3059]: Module vmmon: registered with major=10 minor=165
- [ 10.669440] /dev/vmmon[3059]: Module vmmon: initialized
- [ 10.688484] [3122]: VMCI: shared components initialized.
- [ 10.688513] [3122]: VMCI: host components initialized.
- [ 10.688543] [3122]: VMCI: Module registered (name=vmci,major=10,minor=56).
- [ 10.688545] [3122]: VMCI: Using host personality
- [ 10.688546] [3122]: VMCI: Module (name=vmci) is initialized
- [ 10.718621] Bluetooth: Core ver 2.16
- [ 10.718631] NET: Registered protocol family 31
- [ 10.718632] Bluetooth: HCI device and connection manager initialized
- [ 10.718634] Bluetooth: HCI socket layer initialized
- [ 10.718635] Bluetooth: L2CAP socket layer initialized
- [ 10.718638] Bluetooth: SCO socket layer initialized
- [ 10.721920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 10.721922] Bluetooth: BNEP filters: protocol multicast
- [ 10.746076] Bluetooth: RFCOMM TTY layer initialized
- [ 10.746079] Bluetooth: RFCOMM socket layer initialized
- [ 10.746080] Bluetooth: RFCOMM ver 1.11
- [ 10.796672] lp: driver loaded but no devices found
- [ 10.801678] ppdev: user-space parallel port driver
- [ 10.967048] r8169 0000:04:00.0: eth1: link down
- [ 10.967469] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 11.118886] /dev/vmnet: open called by PID 3483 (vmnet-bridge)
- [ 11.118892] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 11.118905] /dev/vmnet: port on hub 0 successfully opened
- [ 11.118915] bridge-wlan0: device is wireless, enabling SMAC
- [ 11.118918] bridge-wlan0: up
- [ 11.119288] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 11.119295] bridge-wlan0: attached
- [ 11.119825] bridge-wlan0: disabling the bridge on dev down
- [ 11.119873] bridge-wlan0: down
- [ 11.119878] bridge-wlan0: detached
- [ 11.349351] /dev/vmnet: open called by PID 3519 (vmnet-netifup)
- [ 11.349357] /dev/vmnet: hub 1 does not exist, allocating memory.
- [ 11.349369] /dev/vmnet: port on hub 1 successfully opened
- [ 11.369020] /dev/vmnet: open called by PID 3524 (vmnet-dhcpd)
- [ 11.369028] /dev/vmnet: port on hub 1 successfully opened
- [ 11.378172] /dev/vmnet: open called by PID 3532 (vmnet-natd)
- [ 11.378177] /dev/vmnet: hub 8 does not exist, allocating memory.
- [ 11.378190] /dev/vmnet: port on hub 8 successfully opened
- [ 11.380372] /dev/vmnet: open called by PID 3533 (vmnet-netifup)
- [ 11.380379] /dev/vmnet: port on hub 8 successfully opened
- [ 11.399209] /dev/vmnet: open called by PID 3540 (vmnet-dhcpd)
- [ 11.399218] /dev/vmnet: port on hub 8 successfully opened
- [ 13.494878] wlan0: authenticate with a0:f3:c1:9d:35:8e (try 1)
- [ 13.497136] wlan0: authenticated
- [ 13.648872] wlan0: associate with a0:f3:c1:9d:35:8e (try 1)
- [ 13.653491] wlan0: RX AssocResp from a0:f3:c1:9d:35:8e (capab=0x411 status=0 aid=1)
- [ 13.653494] wlan0: associated
- [ 13.706224] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 14.764954] /dev/vmnet: open called by PID 3483 (vmnet-bridge)
- [ 14.764962] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 14.764976] /dev/vmnet: port on hub 0 successfully opened
- [ 14.764983] bridge-wlan0: device is wireless, enabling SMAC
- [ 14.764985] bridge-wlan0: up
- [ 14.764988] bridge-wlan0: attached
- [ 14.964721] userif-3: sent link down event.
- [ 14.964724] userif-3: sent link up event.
- [ 16.147278] userif-3: sent link down event.
- [ 16.147281] userif-3: sent link up event.
- [ 21.663670] vmnet1: no IPv6 routers present
- [ 22.271081] vmnet8: no IPv6 routers present
- [ 25.148294] wlan0: no IPv6 routers present
- [ 25.487151] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 25.866323] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 25.867285] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 26.295130] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 26.361661] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 26.369073] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 29.056449] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 29.120843] ISO 9660 Extensions: RRIP_1991A
- [ 70.100303] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 70.101090] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 70.526082] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 70.592583] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 70.600134] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 625.903893] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 625.904500] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement