Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- *This is the dmesg from a bricked Nexus 7
- e:\android_development\sdk\platform-tools>adb shell dmesg > bricked_nexus7_dmesg.txt
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.4.0-Bricked-TWRP-Edition-g1779bec (tassadar@nymeria) (gcc version 4.7 (GCC) ) #211 SMP PREEMPT Sun May 11 20:51:26 CEST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- <4>[ 0.000000] Machine: QCT APQ8064 FLO
- <2>[ 0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space
- <6>[ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
- <6>[ 0.000000] Hardboot page reserved at 0x88C00000
- <6>[ 0.000000] Initialized persistent memory from 88d00000-88dfffff
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at af800000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
- <6>[ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
- <7>[ 0.000000] On node 0 totalpages: 482047
- <7>[ 0.000000] Normal zone: 1556 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 161516 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 2536 pages used for memmap
- <7>[ 0.000000] HighMem zone: 316439 pages, LIFO batch:31
- <6>[ 0.000000] allocating 44236800 bytes at c25e5000 (827e5000 physical) for fb
- <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c5018000 s15872 r8192 d12800 u36864
- <7>[ 0.000000] pcpu-alloc: s15872 r8192 d12800 u36864 alloc=9*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 477955
- <5>[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=049973d5 bootreason=PowerKey fuse_info=Y ddr_vendor=hynix androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.04
- <6>[ 0.000000] HW Revision: ASUSTek input rev_e
- <6>[ 0.000000] HW Revision: ASUSTek matched rev_e
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 138MB 1MB 58MB 4MB 7MB 254MB 1420MB = 1882MB total
- <5>[ 0.000000] Memory: 1829312k/1950144k available, 98876k reserved, 1275900K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc0b78fe8 (11716 kB)
- <5>[ 0.000000] .init : 0xc0c00000 - 0xc0d03e00 (1040 kB)
- <5>[ 0.000000] .data : 0xc0d04000 - 0xc0e2ec5c (1196 kB)
- <5>[ 0.000000] .bss : 0xc0e2ec80 - 0xc10ae4e4 (2559 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:1177
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67665)
- <6>[ 0.150238] pid_max: default: 32768 minimum: 301
- <6>[ 0.150512] Security Framework initialized
- <6>[ 0.150573] SELinux: Initializing.
- <7>[ 0.150634] SELinux: Starting in permissive mode
- <6>[ 0.150756] Mount-cache hash table entries: 512
- <6>[ 0.152221] Initializing cgroup subsys debug
- <6>[ 0.152221] Initializing cgroup subsys cpuacct
- <6>[ 0.152252] Initializing cgroup subsys freezer
- <6>[ 0.152282] CPU: Testing write buffer coherency: ok
- <6>[ 0.152679] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.152679] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- <6>[ 0.152770] Setting up static identity map for 0x80992a80 - 0x80992b08
- <6>[ 0.156219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <6>[ 0.158111] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- <6>[ 0.160003] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- <6>[ 0.160156] Brought up 4 CPUs
- <6>[ 0.160186] SMP: Total of 4 processors activated (54.13 BogoMIPS).
- <6>[ 0.176055] dummy:
- <6>[ 0.177795] NET: Registered protocol family 16
- <6>[ 0.185058] DMA: preallocated 1792 KiB pool for atomic coherent allocations
- <3>[ 0.185485] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <5>[ 0.189636] MIDR = 0x511f06f0
- <6>[ 0.189666] meminfo_init: smem ram ptable found: ver: 0 len: 5
- <6>[ 0.189697] Found 1 memory banks grouped into 8 memory regions
- <6>[ 0.190063] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
- <6>[ 0.191528] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
- <6>[ 0.191558] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
- <6>[ 0.191619] msm_rpm_init: RPM firmware 3.0.16842936
- <3>[ 0.213165] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213165] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213195] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213195] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213195] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213226] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213226] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.213226] msm_rpm_get_status(): Status id 433 not defined for target
- <6>[ 0.231414] ASUSTek: Bypassing PCB_ID3
- <6>[ 0.231445] ASUSTek: PCBID=043
- <6>[ 0.232482] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
- <6>[ 0.232696] pm8921_probe: PMIC revision 1: F4
- <6>[ 0.232727] pm8921_probe: PMIC revision 2: 06
- <6>[ 0.232727] pm8921_probe: PMIC version: PM8921 rev 3.0
- <6>[ 0.232757] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
- <6>[ 0.234069] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- <6>[ 0.234588] pm_gpio_probe: OK: base=152, ngpio=44
- <6>[ 0.234863] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- <6>[ 0.234954] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- <6>[ 0.236755] pm8821_probe: PMIC revision 1: PM8821 rev F3
- <6>[ 0.236755] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- <6>[ 0.236785] pm8821_probe: PMIC version: PM8821 ver 2.1
- <6>[ 0.237426] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- <6>[ 0.237487] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- <3>[ 0.237762] gpio_vreg_probe: gpio_label required.
- <4>[ 0.237792] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
- <6>[ 0.239013] saw_probe: id=0, name=8921_s5
- <6>[ 0.239379] saw_probe: id=1, name=8921_s6
- <6>[ 0.239715] saw_probe: id=2, name=8821_s0
- <6>[ 0.240081] saw_probe: id=3, name=8821_s1
- <3>[ 0.248107] Sensors:DSPS: initial dsps.
- <4>[ 0.249145] [ELAN] Touch dirver register
- <6>[ 0.249572] persistent_ram: uncorrectable error in header
- <6>[ 0.249572] persistent_ram: no valid data in buffer (sig = 0xffffffff)
- <6>[ 0.260986] console [ram-1] enabled
- <4>[ 0.261566] apq8064_init_fb: lcd_type=0
- <6>[ 0.261779] apq8064_init_fb: register mipi_JDI_panel_device
- <3>[ 0.263122] msm_gpiomux_install: write failure: -22
- <3>[ 0.263214] msm_gpiomux_install: write failure: -22
- <3>[ 0.263366] msm_gpiomux_install: write failure: -22
- <3>[ 0.263458] msm_gpiomux_install: write failure: -22
- <3>[ 0.263610] msm_gpiomux_install: write failure: -22
- <3>[ 0.263702] msm_gpiomux_install: write failure: -22
- <6>[ 0.264587] Registering gpio keys
- <6>[ 0.264770] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC
- <4>[ 0.264984] 8921_l17: Failed to create debugfs directory
- <4>[ 0.266906] ------------[ cut here ]------------
- <4>[ 0.266998] WARNING: at arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x104()
- <4>[ 0.267150] Modules linked in:
- <4>[ 0.267364] [<c0015f44>] (unwind_backtrace+0x0/0x11c) from [<c007ae88>] (warn_slowpath_common+0x4c/0x64)
- <4>[ 0.267547] [<c007ae88>] (warn_slowpath_common+0x4c/0x64) from [<c007aeb8>] (warn_slowpath_null+0x18/0x1c)
- <4>[ 0.267700] [<c007aeb8>] (warn_slowpath_null+0x18/0x1c) from [<c0c0c600>] (subsys_restart_init+0xd8/0x104)
- <4>[ 0.267852] [<c0c0c600>] (subsys_restart_init+0xd8/0x104) from [<c0008718>] (do_one_initcall+0x8c/0x15c)
- <4>[ 0.268035] [<c0008718>] (do_one_initcall+0x8c/0x15c) from [<c0c00a24>] (kernel_init+0xe8/0x1a4)
- <4>[ 0.268127] [<c0c00a24>] (kernel_init+0xe8/0x1a4) from [<c000fdf8>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.268310] ---[ end trace 4ee12b9776abb765 ]---
- <6>[ 0.272583] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- <6>[ 0.272705] sps:BAM 0x12244000 is registered.
- <6>[ 0.273345] sps:sps is ready.
- <6>[ 0.304138] bio: create slab <bio-0> at 0
- <6>[ 0.304870] vgaarb: loaded
- <6>[ 0.305114] ION heap vmalloc created
- <6>[ 0.305297] ION heap mm created at a0000000 with size 5c00000
- <6>[ 0.305419] ION heap mm_fw created at 9fe00000 with size 1e0000
- <6>[ 0.305572] ION heap mfc created at a5c00000 with size 2000
- <6>[ 0.305694] ION heap iommu created
- <6>[ 0.305908] ION heap qsecom created at fea07000 with size 780000
- <6>[ 0.306030] ION heap audio created at ff187000 with size 4cf000
- <5>[ 0.307373] pm8xxx_pwm_probe: OK
- <5>[ 0.308135] SCSI subsystem initialized
- <6>[ 0.308532] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
- <6>[ 0.308715] sps:BAM 0x28084000 is registered.
- <6>[ 0.312835] usbcore: registered new interface driver usbfs
- <6>[ 0.313201] usbcore: registered new interface driver hub
- <6>[ 0.313415] usbcore: registered new device driver usb
- <6>[ 0.313690] Linux media interface: v0.10
- <6>[ 0.313903] Linux video capture interface: v2.00
- <7>[ 0.314331] Registered led device: white
- <6>[ 0.315093] apq8064_pm8921_pwm_init+
- <6>[ 0.315307] apq8064_pm8921_pwm_init-
- <6>[ 0.316162] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
- <6>[ 0.316436] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
- <6>[ 0.316650] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
- <6>[ 0.316925] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
- <6>[ 0.317108] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
- <6>[ 0.317382] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
- <6>[ 0.317657] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
- <6>[ 0.317871] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
- <6>[ 0.318145] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
- <6>[ 0.318420] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
- <6>[ 0.318634] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
- <6>[ 0.318908] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
- <6>[ 0.319396] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- <6>[ 0.319671] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- <6>[ 0.319976] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- <6>[ 0.320220] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- <6>[ 0.320526] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- <6>[ 0.320861] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- <6>[ 0.321075] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- <6>[ 0.321380] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- <6>[ 0.321624] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- <6>[ 0.321899] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- <6>[ 0.322204] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- <6>[ 0.322418] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- <6>[ 0.322723] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- <6>[ 0.322967] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- <6>[ 0.323303] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- <6>[ 0.323669] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- <6>[ 0.323974] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- <6>[ 0.324279] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- <6>[ 0.324554] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- <6>[ 0.324859] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- <6>[ 0.325225] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- <6>[ 0.325439] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- <6>[ 0.325714] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- <6>[ 0.325988] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.326660] Bluetooth: Core ver 2.16
- <6>[ 0.326812] NET: Registered protocol family 31
- <6>[ 0.326965] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.327056] Bluetooth: HCI socket layer initialized
- <6>[ 0.327178] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.327545] Bluetooth: SCO socket layer initialized
- <6>[ 0.328002] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.328125] cfg80211: World regulatory domain updated:
- <6>[ 0.328277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 0.328369] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.328521] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.328674] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.328765] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.328857] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.330017] Switching to clocksource gp_timer
- <6>[ 0.369659] NET: Registered protocol family 2
- <6>[ 0.370391] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.371429] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.373657] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.375030] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.375152] TCP: reno registered
- <6>[ 0.375305] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.375549] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.376281] NET: Registered protocol family 1
- <7>[ 0.376586] PCI: CLS 0 bytes, default 64
- <6>[ 0.377075] Trying to unpack rootfs image as initramfs...
- <6>[ 0.798004] Freeing initrd memory: 3984K
- <6>[ 0.800506] Detected 9 counters on the L2CC PMU.
- <6>[ 0.802429] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- <6>[ 0.804260] pil_riva pil_riva: using secure boot
- <6>[ 0.807037] pil_dsps pil_dsps: using secure boot
- <6>[ 0.808441] pil_gss pil_gss: using secure boot
- <3>[ 0.810852] smd_channel_probe_worker: allocation table not initialized
- <6>[ 0.816864] msm_dsps driver version 4.03.
- <6>[ 0.818511] NET: Registered protocol family 27
- <1>[ 0.821319] dma_test_init, minor number 97
- <6>[ 0.821594] lpass_fatal_init: lpass SSR driver init'ed.
- <6>[ 0.821868] wcnss_8960: module initialized
- <6>[ 0.822235] gss_8064_init: gss fatal driver init'ed.
- <6>[ 0.822937] acpuclk-8064 acpuclk-8064: SPEED BIN: 14
- <6>[ 0.822998] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
- <6>[ 0.825744] acpuclk-8064 acpuclk-8064: CPU0: 23 frequencies supported
- <6>[ 0.825836] acpuclk-8064 acpuclk-8064: CPU1: 23 frequencies supported
- <6>[ 0.826019] acpuclk-8064 acpuclk-8064: CPU2: 23 frequencies supported
- <6>[ 0.826110] acpuclk-8064 acpuclk-8064: CPU3: 23 frequencies supported
- <5>[ 0.827789] msm_rpm_log_probe: OK
- <6>[ 0.831420] usbcore: registered new interface driver hsic_sysmon
- <6>[ 0.832092] audit: initializing netlink socket (disabled)
- <5>[ 0.832244] type=2000 audit(0.810:1): initialized
- <4>[ 0.835021] highmem bounce pool size: 64 pages
- <6>[ 0.893280] NTFS driver 2.1.30 [Flags: R/W].
- <6>[ 0.896362] fuse init (API version 7.18)
- <6>[ 0.901428] msgmni has been set to 1120
- <7>[ 0.902557] SELinux: Registering netfilter hooks
- <6>[ 0.914794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 0.916229] io scheduler noop registered
- <6>[ 0.916992] io scheduler deadline registered
- <6>[ 0.919006] io scheduler cfq registered (default)
- <6>[ 0.920379] io scheduler test-iosched registered
- <6>[ 0.933105] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
- <6>[ 0.934570] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00fc000
- <6>[ 0.936218] mipi_JDI_1080P_pt_init+
- <6>[ 0.938507] mipi_JDI_lcd_probe+
- <6>[ 0.939270] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.940002] mipi_JDI_lcd_probe, lcd_pwm_type=0
- <6>[ 0.943023] mipi_JDI_lcd_probe+
- <6>[ 0.943817] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.944580] mipi_JDI_lcd_probe, lcd_pwm_type=0
- <6>[ 0.945983] setting pdata->panel_info.fb_num to 3. type: 9
- <6>[ 1.006835] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!
- <7>[ 1.010833] Registered led device: lcd-backlight
- <6>[ 1.011352] mipi_JDI_lcd_probe-
- <6>[ 1.012176] mipi_JDI_1080P_pt_init-
- <6>[ 1.017425] setting pdata->panel_info.fb_num to 1. type: 7
- <6>[ 1.037048] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- <6>[ 1.040618] mdp4_dtv_vsync_init: ndx=0
- <3>[ 1.042297] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eddbb208
- <7>[ 1.043792] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
- <6>[ 1.043884] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <6>[ 1.051055]
- <6>[ 1.051086] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 1.054412]
- <6>[ 1.054443] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 1.062469] msm_serial_hs module loaded
- <6>[ 1.065551] msm_serial_hsl: detected port #1
- <6>[ 1.067047] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
- <6>[ 1.069580] msm_serial_hsl: detected port #0
- <6>[ 1.071197] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
- <6>[ 1.072814] msm_serial_hsl: console setup on port #0
- <6>[ 2.614196] console [ttyHSL0] enabled
- <6>[ 2.619354] msm_serial_hsl: driver initialized
- <6>[ 2.629669] msm_rotator_probe: rotator_hw_revision=2
- <6>[ 2.645935] diagchar initialized now
- <6>[ 2.691009] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- <6>[ 2.770599] brd: module loaded
- <6>[ 2.801513] loop: module loaded
- <6>[ 2.811859] anx7808 init gpio
- <6>[ 2.881256] sp_tx_hardware_poweron: anx7808 power on
- <6>[ 2.886016] ANX7808 is found.
- <5>[ 2.889526] 3.3V output disabled
- <6>[ 2.950836] sp_tx_hardware_powerdown: anx7808 power down
- <5>[ 2.955169] SP_TX To System State:
- <5>[ 2.958557] STATE_CABLE_PLUG
- <6>[ 2.962951] tabla-slim tabla-slim: Platform data from board file
- <3>[ 3.131500] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
- <6>[ 3.141418] tabla2x-slim tabla2x-slim: Platform data from board file
- <6>[ 3.211944] wcd9xxx_check_codec_type: codec is tabla_codec
- <6>[ 3.217041] wcd9xxx_check_codec_type: Read codec idbytes & version
- <6>[ 3.217071] byte_0[00000002] byte_1[00000000] byte_2[00000000]
- <6>[ 3.217102] byte_3[00000001] version = 2
- <4>[ 3.237670] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 3.244354] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <6>[ 3.255035] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
- <6>[ 3.263854] bcm2079x-i2c 0-0077: requesting IRQ 320
- <6>[ 3.268890] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
- <6>[ 3.280578] SCSI Media Changer driver v0.25
- <6>[ 3.287017] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
- <6>[ 3.302093] rmnet_init: BAM devices[8]
- <6>[ 3.387664] PPP generic driver version 2.4.2
- <6>[ 3.392578] PPP BSD Compression module registered
- <6>[ 3.397644] PPP Deflate Compression module registered
- <6>[ 3.412811] PPP MPPE Compression module registered
- <6>[ 3.417968] NET: Registered protocol family 24
- <6>[ 3.422454] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 3.432617] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 3.440948] wcnss_wlan probed in built-in mode
- <6>[ 3.449432] usbcore: registered new interface driver asix
- <6>[ 3.455200] usbcore: registered new interface driver cdc_ether
- <6>[ 3.461883] usbcore: registered new interface driver net1080
- <6>[ 3.467651] usbcore: registered new interface driver cdc_subset
- <6>[ 3.474456] usbcore: registered new interface driver zaurus
- <6>[ 3.480560] usbcore: registered new interface driver cdc_ncm
- <4>[ 3.486907] smb345_probe+
- <5>[ 3.493225] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L
- <5>[ 3.502624] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H
- <5>[ 3.511627] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L
- <4>[ 3.522277] smb345_probe-
- <4>[ 3.524841] i2c-core: driver [smb345] using legacy suspend method
- <4>[ 3.530700] i2c-core: driver [smb345] using legacy resume method
- <5>[ 3.537689] bq27541_probe + client->addr= 55
- <5>[ 3.543609] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.549285] bq27541_get_psp voltage_now= 4313000 uV
- <5>[ 3.554138] bq27541_get_capacity = 100% ret= 100
- <5>[ 3.558776] bq27541_get_psp temperature= 246 (0.1¢XC)
- <5>[ 3.564666] bq27541_get_psp current = -58 mA
- <5>[ 3.569061] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.574768] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.580322] setup_low_battery_irq irq=317, LL_BAT_T30=1
- <5>[ 3.580444] bq27541_get_psp voltage_now= 4313000 uV
- <5>[ 3.581329] bq27541_get_capacity = 100% ret= 100
- <5>[ 3.582244] bq27541_get_psp temperature= 246 (0.1¢XC)
- <5>[ 3.583984] bq27541_get_psp current = -58 mA
- <5>[ 3.605499] bq27541_probe - bq27541-battery driver registered
- <4>[ 3.611328] i2c-core: driver [bq27541-battery] using legacy suspend method
- <4>[ 3.618530] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 3.625701] msm_otg msm_otg: msm_otg probe
- <3>[ 3.630340] msm_otg msm_otg: failed to get phy_clk
- <6>[ 3.635284] msm_otg msm_otg: OTG regs = f0308000
- <3>[ 3.642395] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist
- <7>[ 3.648651] gpio_request: gpio-23 (msm_otg_ap_acok) status -16
- <4>[ 3.648742] gpio 23 request failed
- <4>[ 3.652526] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L
- <7>[ 3.660552] gpio_request: gpio-77 (msm_otg_id_pin) status -16
- <4>[ 3.660614] gpio 77 request failed
- <4>[ 3.664398] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H
- <6>[ 3.674224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 3.686401] usbcore: registered new interface driver cdc_acm
- <6>[ 3.691955] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 3.700408] Initializing USB Mass Storage driver...
- <6>[ 3.705566] usbcore: registered new interface driver usb-storage
- <6>[ 3.712066] USB Mass Storage support registered.
- <6>[ 3.716735] usbcore: registered new interface driver ums-alauda
- <6>[ 3.723449] usbcore: registered new interface driver ums-cypress
- <6>[ 3.729522] usbcore: registered new interface driver ums-datafab
- <6>[ 3.736328] usbcore: registered new interface driver ums-freecom
- <6>[ 3.742553] usbcore: registered new interface driver ums-isd200
- <6>[ 3.749145] usbcore: registered new interface driver ums-jumpshot
- <6>[ 3.755432] usbcore: registered new interface driver ums-karma
- <6>[ 3.762054] usbcore: registered new interface driver ums-onetouch
- <6>[ 3.768218] usbcore: registered new interface driver ums-sddr09
- <6>[ 3.774963] usbcore: registered new interface driver ums-sddr55
- <6>[ 3.781066] usbcore: registered new interface driver ums-usbat
- <6>[ 3.788085] usbcore: registered new interface driver usbserial
- <6>[ 3.793762] usbserial: USB Serial Driver core
- <6>[ 3.798980] usbcore: registered new interface driver qc_csvt
- <6>[ 3.804718] USB Serial support registered for qc_csvt
- <6>[ 3.810516] usbcore: registered new interface driver usb_ehset_test
- <6>[ 3.817047] usbcore: registered new interface driver diag_bridge
- <6>[ 3.824645] usbcore: registered new interface driver mdm_bridge
- <6>[ 3.833404] usbcore: registered new interface driver ks_bridge
- <6>[ 3.839569] ksb_init: init done
- <6>[ 3.843872] msm_otg msm_otg: phy_reset: success
- <6>[ 3.852539] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- <6>[ 3.859313] mbim_init: initialize 1 instances
- <6>[ 3.864105] mbim_init: Initialized 1 ports
- <6>[ 3.879394] rndis_qc_init: initialize rndis QC instance
- <6>[ 3.886383] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 3.893768] android_usb gadget: Number of LUNs=1
- <6>[ 3.898132] lun0: LUN: removable file: (no medium)
- <6>[ 3.905914] android_usb gadget: android_usb ready
- <6>[ 3.913879] mousedev: PS/2 mouse device common for all mice
- <6>[ 3.923583] usbcore: registered new interface driver xpad
- <4>[ 3.928741] [ektf3k]:[elan] elan_ktf3k_ts_init
- <4>[ 3.934326] [ektf3k]:[ELAN] Start HW reset!
- <4>[ 3.951141] [usb_otg] switch to peripheral mode by default (boot)
- <4>[ 4.191131] [ektf3k]:[elan]detect intr=>Old FW
- <6>[ 4.191223] notifying plugin
- <4>[ 4.198455] [ektf3k]:The boot code is old!
- <4>[ 4.231414] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
- <4>[ 4.237609] [ektf3k]:[elan] hello packet's rc = 0
- <6>[ 4.321258] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
- <5>[ 4.326843] smb345_charger: [usb_cable_type_detect] INOK=L
- <5>[ 4.332214] smb345_charger: [usb_cable_type_detect] Cable: SDP
- <5>[ 4.339355] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8
- <4>[ 4.347229] ========================================================
- <4>[ 4.353454] bq27541_battery_callback usb_cable_state = 1
- <4>[ 4.359313] ========================================================
- <6>[ 4.365509] battery_callback cable_wake_lock 5 sec...
- <6>[ 4.365570]
- <6>[ 4.372283] The USB cable status = CHARGER_SDP
- <6>[ 4.383026] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- <4>[ 4.452789] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044
- <4>[ 4.481781] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e
- <4>[ 4.489257] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2
- <4>[ 4.496673] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029
- <4>[ 4.504089] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047
- <4>[ 4.509643] [ektf3k]:[Elan] Max X=2239, Max Y=1343
- <6>[ 4.514587] input: elan-touchscreen as /devices/virtual/input/input0
- <4>[ 4.521820] [ektf3k]:The firmware was version 0xA044 and id:0x3029
- <4>[ 4.527893] [ektf3k]: /proc/ektf_dbg created
- <4>[ 4.533477] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
- <4>[ 4.541870] [ektf3k]:[ELAN]misc_register finished!!
- <6>[ 4.546936] elan-ktf3k 3-0010: Update power source to 1
- <6>[ 4.553222] lis3dh_acc accelerometer driver: init
- <4>[ 4.557037] i2c-core: driver [lis3dh_acc] using legacy suspend method
- <4>[ 4.563507] i2c-core: driver [lis3dh_acc] using legacy resume method
- <6>[ 4.570129] ASUSTek: lid_driver_probe
- <6>[ 4.573425] input: lid_input as /devices/virtual/input/input1
- <6>[ 4.585296] using rtc device, pm8xxx_rtc, for alarms
- <6>[ 4.590545] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- <6>[ 4.599639] i2c /dev entries driver
- <3>[ 4.621032] ov5693_init_module:105
- <3>[ 4.625457] ov5693_init_module:110 rc -19
- <3>[ 4.664886] gpio 25 VCM_PD(1)
- <3>[ 4.666992] gpio 31 XSHUTDN(1)
- <6>[ 4.725799] mi1040_init_module:323
- <3>[ 4.728637] mi1040_init_module:329 rc -19
- <3>[ 4.910888] gpio 43 CAM_RST(1)
- <6>[ 4.970855] mi1040_sensor_match_id +++
- <6>[ 4.974273] Sensor id: 0x2481
- <6>[ 4.976593] PMIC gpio 11 CAM_VENDOR_1(1)
- <6>[ 4.980560] PMIC gpio 10 CAM_VENDOR_0(0)
- <6>[ 4.984466] PMIC gpio 24 CAM_LENS(1)
- <6>[ 4.987976] Vendor is A
- <6>[ 4.990447] mi1040_sensor_match_id ---
- <6>[ 5.232910] lirc_dev: IR Remote Control driver registered, major 237
- <6>[ 5.238494] IR NEC protocol handler initialized
- <6>[ 5.243011] IR RC5(x) protocol handler initialized
- <6>[ 5.247711] IR RC6 protocol handler initialized
- <6>[ 5.252319] IR JVC protocol handler initialized
- <6>[ 5.256713] IR Sony protocol handler initialized
- <6>[ 5.261413] IR RC5 (streamzap) protocol handler initialized
- <6>[ 5.266876] IR SANYO protocol handler initialized
- <6>[ 5.271606] IR MCE Keyboard/mouse protocol handler initialized
- <6>[ 5.277465] IR LIRC bridge handler initialized
- <6>[ 5.282440] gspca_main: v2.14.0 registered
- <6>[ 5.286102] usbcore: registered new interface driver uvcvideo
- <6>[ 5.291656] USB Video Class driver (1.1.1)
- <3>[ 5.297546] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- <6>[ 5.304779] CAP1106: [cap1106_init]
- <4>[ 5.307525] i2c-core: driver [cap1106] using legacy suspend method
- <4>[ 5.313629] i2c-core: driver [cap1106] using legacy resume method
- <6>[ 5.323333] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 5.331054] Bluetooth: HCI UART driver ver 2.2
- <6>[ 5.335296] Bluetooth: HCI H4 protocol initialized
- <6>[ 5.339996] Bluetooth: HCIATH3K protocol initialized
- <6>[ 5.345428] Bluetooth: HCI_IBS protocol initialized
- <6>[ 5.351715] cpuidle: using governor ladder
- <6>[ 5.355529] cpuidle: using governor menu
- <6>[ 5.362091] mmc0: SDCC Version: 0x06000018
- <6>[ 5.368621] mmc0: bam physical base=0x12402000
- <6>[ 5.372161] mmc0: bam virtual base=0xf0334000
- <6>[ 5.376525] sps:BAM 0x12402000 is registered.
- <6>[ 5.380615] mmc0: BAM device registered. bam_handle=0xed914c00
- <6>[ 5.389373] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <6>[ 5.396667] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- <6>[ 5.402465] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- <3>[ 5.408111] mmc0: No card detect facilities available
- <6>[ 5.415039] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- <6>[ 5.422515] mmc0: Controller capabilities: 0x0000039a
- <6>[ 5.427490] mmc0: 8 bit data mode enabled
- <6>[ 5.431488] mmc0: 4 bit data mode disabled
- <6>[ 5.435607] mmc0: polling status mode disabled
- <6>[ 5.439971] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- <6>[ 5.445709] mmc0: Slot eject status = 0
- <6>[ 5.449401] mmc0: Power save feature enable = 1
- <6>[ 5.453948] mmc0: SPS-BAM data transfer mode available
- <6>[ 5.463623] usbcore: registered new interface driver usbhid
- <6>[ 5.468261] usbhid: USB HID core driver
- <6>[ 5.480712] ashmem: initialized
- <6>[ 5.484283] logger: created 256K log 'log_main'
- <6>[ 5.489135] logger: created 256K log 'log_events'
- <6>[ 5.494812] logger: created 256K log 'log_radio'
- <6>[ 5.499664] logger: created 256K log 'log_system'
- <6>[ 5.508361] usbcore: registered new interface driver snd-usb-audio
- <3>[ 5.521118] tabla_probe
- <6>[ 5.531463] msm_pcm_probe: dev name msm-voip-dsp
- <6>[ 5.537872] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
- <6>[ 5.549377] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
- <6>[ 5.566436] msm_pcm_probe: dev name msm-pcm-dsp
- <6>[ 5.572326] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- <6>[ 5.579437] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- <6>[ 5.584777] adding pm_qos request in low latency driver
- <6>[ 5.589874] done adding pm_qos request in low latency driver
- <6>[ 5.600677] msm_compr_probe: dev name msm-compr-dsp
- <6>[ 5.608276] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- <3>[ 5.620574] msm8930_audio_init: Not the right machine type
- <3>[ 5.625946] msm_audio_init: Not the right machine type
- <6>[ 5.631652] msm_audio_init: Not APQ8064 in I2S mode
- <6>[ 5.642761] tabla codec probe...
- <6>[ 5.952392] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 5.960662] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <6>[ 5.969696] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- <6>[ 5.977874] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- <6>[ 5.985931] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 5.994689] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- <6>[ 6.003997] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- <6>[ 6.012451] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- <6>[ 6.020812] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- <6>[ 6.028686] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- <6>[ 6.037811] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- <6>[ 6.046264] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- <6>[ 6.055633] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- <6>[ 6.063873] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- <6>[ 6.072662] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- <6>[ 6.083679] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- <6>[ 6.104858] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- <6>[ 6.112182] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- <6>[ 6.120300] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- <6>[ 6.127960] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- <6>[ 6.136230] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- <6>[ 6.143768] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- <6>[ 6.152130] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- <6>[ 6.159179] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- <6>[ 6.167449] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- <6>[ 6.174499] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- <6>[ 6.182250] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- <6>[ 6.189300] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- <6>[ 6.196960] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- <6>[ 6.204498] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- <6>[ 6.213195] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- <6>[ 6.220977] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
- <6>[ 6.229003] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- <6>[ 6.236419] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- <6>[ 6.244476] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- <6>[ 6.251556] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- <6>[ 6.259613] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
- <6>[ 6.276580] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2
- <6>[ 6.288513] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3
- <6>[ 6.319549] headset_init+ #####
- <6>[ 6.325988] input: h2w button as /devices/virtual/input/input4
- <6>[ 6.333496] HEADSET: Headset detection mode
- <5>[ 6.372070] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 6.378265] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 6.383941] bq27541_get_psp voltage_now= 4312000 uV
- <5>[ 6.389343] bq27541_get_capacity = 100% ret= 100
- <6>[ 6.395019] set_hs_micbias badgap status: OFF power down bandgap
- <5>[ 6.395324] bq27541_get_psp temperature= 246 (0.1¢XC)
- <5>[ 6.396942] bq27541_get_psp current = -58 mA
- <6>[ 6.410919] headset_init- #####
- <6>[ 6.414642] u32 classifier
- <6>[ 6.417694] Actions configured
- <6>[ 6.420959] Netfilter messages via NETLINK v0.30.
- <6>[ 6.425872] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 6.438018] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 6.443481] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 6.450775] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 6.457824] xt_time: kernel timezone is -0000
- <6>[ 6.466308] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 6.474090] arp_tables: (C) 2002 David S. Miller
- <6>[ 6.479583] TCP: cubic registered
- <5>[ 6.481689] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73
- <5>[ 6.482147] smb345_charger: [smb345_config_thermal_charging] temp=24, volt=4313000
- <5>[ 6.482604] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 6.482910] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <6>[ 6.519897] NET: Registered protocol family 10
- <6>[ 6.550109] Mobile IPv6
- <6>[ 6.552642] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 6.560180] IPv6 over IPv4 tunneling driver
- <6>[ 6.568695] NET: Registered protocol family 17
- <6>[ 6.573822] NET: Registered protocol family 15
- <6>[ 6.578582] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 6.584075] Bluetooth: RFCOMM socket layer initialized
- <6>[ 6.588928] Bluetooth: RFCOMM ver 1.11
- <6>[ 6.592803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 6.598571] Bluetooth: BNEP filters: protocol multicast
- <6>[ 6.603637] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 6.610687] L2TP core driver, V2.0
- <6>[ 6.614074] PPPoL2TP kernel driver, V2.0
- <5>[ 6.617736] Registering the dns_resolver key type
- <6>[ 6.629211] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- <5>[ 6.636779] Registering SWP/SWPB emulation handler
- <6>[ 6.641601] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 6.654144] cpufreq: cpu1 init at 94500 switching to 384000
- <6>[ 6.658905] cpufreq: cpu2 init at 94500 switching to 384000
- <6>[ 6.666137] cpufreq: cpu3 init at 94500 switching to 384000
- <6>[ 6.671936] [MPDEC]: msm_mpdec_init init complete.
- <6>[ 6.679229] MSM Watchdog Initialized
- <3>[ 6.686798] mmc0: error -110 whilst initialising MMC card
- <7>[ 6.709625] gpio_set_debounce: gpio-26 status -22
- <7>[ 6.709899] gpio_set_debounce: gpio-155 status -22
- <7>[ 6.710113] gpio_set_debounce: gpio-189 status -22
- <6>[ 6.711029] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5
- <6>[ 6.718475] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-05-27 04:10:33 UTC (1432699833)
- <3>[ 6.728210] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
- <3>[ 6.737579] Unable to register core for 0
- <4>[ 6.741546] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
- <6>[ 6.748138] ALSA device list:
- <6>[ 6.750946] #0: apq8064-tabla-snd-card
- <6>[ 6.755615] Freeing init memory: 1036K
- <7>[ 6.764373] SELinux: 512 avtab hash slots, 1574 rules.
- <7>[ 6.765106] SELinux: 512 avtab hash slots, 1574 rules.
- <7>[ 6.765289] SELinux: 1 users, 2 roles, 288 types, 13 bools, 1 sens, 1024 cats
- <7>[ 6.765319] SELinux: 84 classes, 1574 rules
- <7>[ 6.766326] SELinux: Completing initialization.
- <7>[ 6.766326] SELinux: Setting up existing superblocks.
- <7>[ 6.766357] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 6.766387] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 6.767242] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 6.767272] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 6.767303] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 6.767333] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 6.778503] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 6.778533] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 6.778564] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 6.778564] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 6.778594] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 6.778717] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 6.778747] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 6.951934] type=1403 audit(1432699833.730:2): policy loaded auid=4294967295 ses=4294967295
- <4>[ 6.959564] SELinux: Loaded policy from (null)
- <3>[ 6.968963] init: /init.rc: 64: invalid command 'load_all_props'
- <3>[ 6.974121] init: /init.rc: 88: invalid command 'powerctl'
- <3>[ 6.979553] init: could not import file '/init.recovery.flo.rc' from '/init.rc'
- <3>[ 6.987487] init: cannot find '/sbin/healthd', disabling 'healthd'
- <5>[ 7.004638] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 7.009246] bq27541_get_psp voltage_now= 4312000 uV
- <5>[ 7.014251] bq27541_get_capacity = 100% ret= 100
- <5>[ 7.018676] bq27541_get_psp temperature= 246 (0.1¢XC)
- <5>[ 7.024353] bq27541_get_psp current = -58 mA
- <3>[ 7.216369] init: cannot open '/initlogo.rle'
- <7>[ 7.221252] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 7.224609] enable_store: android_usb: already disabled
- <3>[ 7.229705] init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 7.240295] init: cannot setexeccon('u:r:recovery:s0'): Invalid argument
- <6>[ 7.244323] adb_open
- <6>[ 7.244323] mtp_bind_config
- <6>[ 7.244384] adb_bind_config
- <4>[ 7.271148] mipi_dsi_panel_power+, on=1
- <3>[ 7.350982] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
- <4>[ 7.351074] mipi_dsi_panel_power-
- <6>[ 7.351104] android_work: android_work: did not send uevent (0 0 (null))
- <6>[ 7.356658] mipi_JDI_lcd_on+
- <6>[ 7.356689] mipi_JDI_lcd_on-, booting
- <6>[ 7.374725] mipi_JDI_set_recovery_backlight: 100/255
- <6>[ 7.379394] android_work: android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 7.417846] android_usb gadget: high-speed config #1: android_usb
- <3>[ 7.417907] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
- <6>[ 7.417907] msm_otg msm_otg: Avail curr from USB = 500
- <6>[ 7.441131] mipi_JDI_set_backlight: pwm enable
- <6>[ 7.471221] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 9.391662] msm_ta_detect_work: USB exit ta detection - frindex
- <5>[ 10.900787] bq27541_get_capacity = 100% ret= 100
- <5>[ 10.905151] bq27541_get_psp status: Full ret= 0x0201
- <6>[ 22.757232] mtp_open
- <6>[ 26.999237] [MPDEC]: CPU[3] on->off | Mask=[1110] | time online: 26987
- <6>[ 27.269348] [MPDEC]: CPU[2] on->off | Mask=[1100] | time online: 27257
- <6>[ 27.539367] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 27527
- <5>[ 66.582824] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 66.592620] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 66.602416] bq27541_get_psp voltage_now= 4310000 uV
- <5>[ 66.606842] bq27541_get_capacity = 100% ret= 100
- <5>[ 66.622436] bq27541_get_psp temperature= 249 (0.1¢XC)
- <5>[ 66.632965] bq27541_get_psp current = -61 mA
- <5>[ 66.694824] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 66.701934] smb345_charger: [smb345_config_thermal_charging] temp=24, volt=4312000
- <5>[ 66.709655] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 66.717315] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <6>[ 83.532165] mipi_JDI_set_backlight: pwm disable
- <5>[ 113.921966] type=1400 audit(1432699939.969:3): avc: denied { getattr } for pid=163 comm="adbd" path="/sbin/busybox" dev="rootfs" ino=6200 scontext=u:r:adbd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <4>[ 113.942871] adbd (177): /proc/177/oom_adj is deprecated, please use /proc/177/oom_score_adj instead.
- <5>[ 113.952362] type=1400 audit(1432699939.999:4): avc: denied { execute } for pid=177 comm="adbd" name="busybox" dev="rootfs" ino=6200 scontext=u:r:adbd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <5>[ 113.969024] type=1400 audit(1432699940.019:5): avc: denied { open } for pid=177 comm="adbd" name="busybox" dev="rootfs" ino=6200 scontext=u:r:adbd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <5>[ 113.986389] type=1400 audit(1432699940.039:6): avc: denied { execute_no_trans } for pid=177 comm="adbd" path="/sbin/busybox" dev="rootfs" ino=6200 scontext=u:r:adbd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <6>[ 114.005859] [MPDEC]: CPU[1] off->on | Mask=[1100]
- <5>[ 114.015625] type=1400 audit(1432699940.059:7): avc: denied { syslog_read } for pid=183 comm="dmesg" scontext=u:r:adbd:s0 tcontext=u:r:kernel:s0 tclass=system
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement