Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sun7i#go 0x40200100
- ## Starting application at 0x40200100 ...
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- Copyright (c) 1992-2013 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 10.0-CURRENT #23: Wed Jul 31 17:37:00 ULAT 2013
- tsgan@bsd.mobicom.mn:/usr/obj/arm.armv6/usr/src/sys/CUBIEBOARD2 arm
- FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
- WARNING: WITNESS option enabled, expect reduced performance.
- CPU: Cortex A7 rev 4 (Cortex-A core)
- Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
- WB disabled EABT branch prediction enabled
- LoUU:2 LoC:2 LoUIS:2
- Cache level 1:
- 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
- 32KB/32B 2-way instruction cache Read-Alloc
- Cache level 2:
- 256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
- real memory = 536870912 (512 MB)
- avail memory = 511631360 (487 MB)
- random device not loaded; using insecure entropy
- random: <Software, Yarrow> initialized
- simplebus0: <Flattened device tree simple bus> on fdtbus0
- gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c820ff on simplebus0
- gic0: pn 0x10, arch 0x2, rev 0x1, implementer 0x43b nirqs 160
- a20_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on simplebus0
- a20_timer0: <Allwinner A20 timer> mem 0x1c20c00-0x1c20c8f irq 22 on simplebus0
- Event timer "a20_timer Eventtimer" frequency 24000000 Hz quality 1000
- Timecounter "a20_timer timer0" frequency 24000000 Hz quality 1000
- a20wd0: <Allwinner A20 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0
- gpio0: <Allwinner GPIO controller> mem 0x1c20800-0x1c20bff irq 28 on simplebus0
- gpioc0: <GPIO controller> on gpio0
- gpiobus0: <GPIO bus> on gpio0
- ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c14fff irq 39 on simplebus0
- ehci_init: start
- usbus0: EHCI version 1.0
- ehci_init: sparams=0x1101
- ehci_init_sub: cparams=0xa026
- usb_probe:
- usbus0 on ehci0
- usb_attach:
- usb_proc_msignal: t=0, num=0
- usb_needs_explore:
- usb_needs_explore: No root HUB
- ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1cfff irq 40 on simplebus0
- ehci_init: start
- usbus1: EHCI version 1.0
- ehci_init: sparams=0x1101
- ehci_init_sub: cparams=0xa026
- usb_probe:
- usbus1 on ehci1
- usb_attach:
- usb_proc_msignal: t=0, num=0
- usb_needs_explore:
- usb_needs_explore: No root HUB
- uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 1 on simplebus0
- uart0: console (115200,n,8,1)
- Timecounters tick every 10.000 msec
- usb_process: Message pm=0xc241bdac, cb=0xc025cce8 (enter)
- usb_bus_attach:
- usbus0: 480Mbps High Speed USB v2.0
- ehci_set_hw_power:
- ehci_set_hw_power: Async is active
- ehci_set_hw_power: Periodic is active
- usb_alloc_device: parent_dev=0xc2428200, bus=0xc241bc78, parent_hub=0, depth=0, port_index=0, port_no=1, speed=3, usb_mode=0
- ehci_ep_init: endpoint=0xc243e078, addr=0, endpt=0, mode=0 (0)
- usb_set_device_state: udev 0xc243e000 state DETACHED -> POWERED
- usbd_req_set_address: setting device address=1
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x00 bRequest=0x05 wValue=0x0001 wIndex=0x0000 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x00 request=0x05 wLen=0x0000 wValue=0x0001 wIndex=0x0000
- usb_process: Message pm=0xc242fdac, cb=0xc025cce8 (enter)
- usb_bus_attach:
- usbus1: 480Mbps High Speed USB v2.0
- ehci_set_hw_power:
- ehci_set_hw_power: Async is active
- ehci_set_hw_power: Periodic is active
- usb_alloc_device: parent_dev=0xc2439a80, bus=0xc242fc78, parent_hub=0, depth=0, port_index=0, port_no=1, speed=3, usb_mode=0
- ehci_ep_init: endpoint=0xc243d878, addr=0, endpt=0, mode=0 (0)
- usb_set_device_state: udev 0xc243d800 state DETACHED -> POWERED
- usbd_req_set_address: setting device address=1
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x00 bRequest=0x05 wValue=0x0001 wIndex=0x0000 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x00 request=0x05 wLen=0x0000 wValue=0x0001 wIndex=0x0000
- usb_set_device_state: udev 0xc243d800 state POWERED -> ADDRESSED
- usbd_setup_device_desc: Minimum bMaxPacketSize is large enough to hold the complete device descriptor or only one bMaxPacketSize choice
- usbd_req_get_device_desc:
- usbd_req_get_desc: id=0, type=1, index=0, max_len=18
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0012
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0012 wValue=0x0100 wIndex=0x0000
- usbd_setup_device_desc: adding unit addr=1, rev=200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3
- usbd_req_get_desc: id=0, type=3, index=0, max_len=4
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0300 wIndex=0x0000
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0004 wValue=0x0300 wIndex=0x0000
- usb_alloc_device: Using first language
- usb_alloc_device: Language selected: 0x0001
- usbd_req_get_desc: id=1, type=3, index=1, max_len=255
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0301 wIndex=0x0001
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0014
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0014 wValue=0x0301 wIndex=0x0001
- usbd_req_get_desc: id=1, type=3, index=2, max_len=255
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0302 wIndex=0x0001
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x001c
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x001c wValue=0x0302 wIndex=0x0001
- usb_alloc_device: setting config 0
- usbd_set_config_index: udev=0xc243d800 index=0
- usb_detach_device: udev=0xc243d800
- usb_cdev_free: Freeing device nodes
- usb_config_parse: iface_index=255 cmd=1
- usbd_req_get_config_desc_full: index=0
- usbd_req_get_config_desc: confidx=0
- usbd_req_get_desc: id=0, type=2, index=0, max_len=9
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0009
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0009 wValue=0x0200 wIndex=0x0000
- usbd_req_get_desc: id=0, type=2, index=0, max_len=25
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0019
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0019 wValue=0x0200 wIndex=0x0000
- usbd_set_config_index: udev=0xc243d800 cdesc=0xc2281a80 (addr 1) cno=1 attr=0x40, selfpowered=1, power=0
- usb_set_device_state: udev 0xc243d800 state ADDRESSED -> CONFIGURED
- usbd_req_set_config: setting config 1
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x00 bRequest=0x09 wValue=0x0001 wIndex=0x0000 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x00 request=0x09 wLen=0x0000 wValue=0x0001 wIndex=0x0000
- usb_config_parse: iface_index=255 cmd=0
- usb_config_parse: found idesc nendpt=1
- usb_config_parse: iface_index=255 cmd=2
- usb_config_parse: found idesc nendpt=1
- ehci_ep_init: endpoint=0xc2287700, addr=1, endpt=129, mode=0 (1)
- usb_cdev_create: Creating device nodes
- usbd_set_config_index: error=USB_ERR_NORMAL_COMPLETION
- usb_detach_device: udev=0xc243d800
- usb_alloc_device: new dev (addr 1), udev=0xc243d800, parent_hub=0
- usb_bus_port_set_device: bus 0xc242fc78 devices[1] = 0xc243d800
- ugen1.1: <Allwinner> at usbus1
- usb_probe_and_attach: iclass=9/0/0 iindex=0/0
- uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- uhub_attach: depth=0 selfpowered=1, parent=0, parent->selfpowered=0
- uhub_attach: Getting HUB descriptor
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0xa0 bRequest=0x06 wValue=0x2900 wIndex=0x0000 wLength=0x0009
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa0 request=0x06 wLen=0x0009 wValue=0x2900 wIndex=0x0000
- usb_set_device_state: udev 0xc243e000 state POWERED -> ADDRESSED
- usbd_setup_device_desc: Minimum bMaxPacketSize is large enough to hold the complete device descriptor or only one bMaxPacketSize choice
- usbd_req_get_device_desc:
- usbd_req_get_desc: id=0, type=1, index=0, max_len=18
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0012
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0012 wValue=0x0100 wIndex=0x0000
- usbd_setup_device_desc: adding unit addr=1, rev=200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3
- usbd_req_get_desc: id=0, type=3, index=0, max_len=4
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0300 wIndex=0x0000
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0004 wValue=0x0300 wIndex=0x0000
- usb_alloc_device: Using first language
- usb_alloc_device: Language selected: 0x0001
- usbd_req_get_desc: id=1, type=3, index=1, max_len=255
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0301 wIndex=0x0001
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0014
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0014 wValue=0x0301 wIndex=0x0001
- usbd_req_get_desc: id=1, type=3, index=2, max_len=255
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x0002
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0002 wValue=0x0302 wIndex=0x0001
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x001c
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x001c wValue=0x0302 wIndex=0x0001
- usb_alloc_device: setting config 0
- usbd_set_config_index: udev=0xc243e000 index=0
- usb_detach_device: udev=0xc243e000
- usb_cdev_free: Freeing device nodes
- usb_config_parse: iface_index=255 cmd=1
- usbd_req_get_config_desc_full: index=0
- usbd_req_get_config_desc: confidx=0
- usbd_req_get_desc: id=0, type=2, index=0, max_len=9
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0009
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0009 wValue=0x0200 wIndex=0x0000
- usbd_req_get_desc: id=0, type=2, index=0, max_len=25
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0019
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x80 request=0x06 wLen=0x0019 wValue=0x0200 wIndex=0x0000
- usbd_set_config_index: udev=0xc243e000 cdesc=0xc2281b20 (addr 1) cno=1 attr=0x40, selfpowered=1, power=0
- usb_set_device_state: udev 0xc243e000 state ADDRESSED -> CONFIGURED
- usbd_req_set_config: setting config 1
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x00 bRequest=0x09 wValue=0x0001 wIndex=0x0000 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x00 request=0x09 wLen=0x0000 wValue=0x0001 wIndex=0x0000
- usb_config_parse: iface_index=255 cmd=0
- usb_config_parse: found idesc nendpt=1
- usb_config_parse: iface_index=255 cmd=2
- usb_config_parse: found idesc nendpt=1
- ehci_ep_init: endpoint=0xc2287600, addr=1, endpt=129, mode=0 (1)
- usb_cdev_create: Creating device nodes
- usbd_set_config_index: error=USB_ERR_NORMAL_COMPLETION
- usb_detach_device: udev=0xc243e000
- usb_alloc_device: new dev (addr 1), udev=0xc243e000, parent_hub=0
- usb_bus_port_set_device: bus 0xc241bc78 devices[1] = 0xc243e000
- ugen0.1: <Allwinner> at usbus0
- usb_probe_and_attach: iclass=9/0/0 iindex=0/0
- uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- uhub_attach: depth=0 selfpowered=1, parent=0, parent->selfpowered=0
- uhub_attach: Getting HUB descriptor
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0xa0 bRequest=0x06 wValue=0x2900 wIndex=0x0000 wLength=0x0009
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa0 request=0x06 wLen=0x0009 wValue=0x2900 wIndex=0x0000
- WARNING: WITNESS option enabled, expect reduced performance.
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x03 wLen=0x0000 wValue=0x0008 wIndex=0x0001
- ehci_roothub_exec: set port power 1
- uhub_attach: turn on port 1 power
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x03 wLen=0x0000 wValue=0x0008 wIndex=0x0001
- ehci_roothub_exec: set port power 1
- uhub_attach: turn on port 1 power
- uhub0: 1 port with 1 removable, self powered
- usb_needs_explore:
- usb_proc_msignal: t=0, num=0
- usb_probe_and_attach: end of interfaces at 1
- usb_needs_explore:
- usb_proc_msignal: t=1, num=1
- usb_process: Message pm=0xc242fdac (leave)
- usb_process: Message pm=0xc242fd5c, cb=0xc025cb24 (enter)
- usb_bus_powerd: bus=0xc242fc78
- usb_bus_powerd: Recomputing power masks
- ehci_set_hw_power:
- uhub_explore: udev=0xc243d800 addr=1
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001
- ehci_roothub_exec: get port status i=1
- ehci_roothub_exec: port status=0x1803
- uhub_read_port_status: port 1, wPortStatus=0x0501, wPortChange=0x0001, err=USB_ERR_NORMAL_COMPLETION
- uhub_reattach_port: reattaching port 1
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x23 bRequest=0x01 wValue=0x0010 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x01 wLen=0x0000 wValue=0x0010 wIndex=0x0001
- ehci_roothub_exec: UR_CLEAR_PORT_FEATURE
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001
- ehci_roothub_exec: get port status i=1
- ehci_roothub_exec: port status=0x1801
- uhub_read_port_status: port 1, wPortStatus=0x0501, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
- uhub_reattach_port: Port 1 is in Host Mode
- uhub1: 1 port with 1 removable, self powered
- usb_needs_explore:
- usb_proc_msignal: t=0, num=0
- usb_probe_and_attach: end of interfaces at 1
- usb_needs_explore:
- usb_proc_msignal: t=1, num=1
- usb_process: Message pm=0xc241bdac (leave)
- usb_process: Message pm=0xc241bd5c, cb=0xc025cb24 (enter)
- usb_bus_powerd: bus=0xc241bc78
- usb_bus_powerd: Recomputing power masks
- ehci_set_hw_power:
- uhub_explore: udev=0xc243e000 addr=1
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001
- ehci_roothub_exec: get port status i=1
- ehci_roothub_exec: port status=0x1000
- uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
- uhub_reattach_port: reattaching port 1
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0x23 bRequest=0x01 wValue=0x0010 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x01 wLen=0x0000 wValue=0x0010 wIndex=0x0001
- ehci_roothub_exec: UR_CLEAR_PORT_FEATURE
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001
- ehci_roothub_exec: get port status i=1
- ehci_roothub_exec: port status=0x1000
- uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
- usb_root_mount_rel: Releasing root mount hold 0xc240ef80
- usb_process: Message pm=0xc241bd5c (leave)
- usb_process: Message pm=0xc241bd70, cb=0xc025cb24 (enter)
- usb_bus_powerd: bus=0xc241bc78
- usb_bus_powerd: Recomputing power masks
- ehci_set_hw_power:
- uhub_explore: udev=0xc243e000 addr=1
- usbd_do_request_flags: udev=0xc243e000 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001
- ehci_roothub_exec: get port status i=1
- ehci_roothub_exec: port status=0x1000
- uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
- usb_process: Message pm=0xc241bd70 (leave)
- Root mount waiting for: usbus1
- usbd_req_reset_port:
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x23 bRequest=0x01 wValue=0x0014 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x01 wLen=0x0000 wValue=0x0014 wIndex=0x0001
- ehci_roothub_exec: UR_CLEAR_PORT_FEATURE
- usbd_do_request_flags: udev=0xc243d800 bmRequestType=0x23 bRequest=0x03 wValue=0x0004 wIndex=0x0001 wLength=0x0000
- usbd_do_request_flags: Handle Request function is set
- ehci_roothub_exec: type=0x23 request=0x03 wLen=0x0000 wValue=0x0004 wIndex=0x0001
- ehci_roothub_exec: reset port 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement