Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.08.31 14:23:46 =~=~=~=~=~=~=~=~=~=~=~=
- £tصb $U @
- Texas Instruments X-Loader 1.4.4ss (Apr 13 2010 - 22:36:28)
- Beagle Rev C4
- Reading boot sector
- Loading u-boot.bin from mmc
- U-Boot 2010.03 (Jun 06 2010 - 10:00:15)
- OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max clock-720Mhz
- OMAP3 Beagle board + LPDDR/NAND
- I2C: ready
- DRAM: 256 MB
- NAND: 256 MiB
- *** Warning - bad CRC or NAND, using default environment
- In: serial
- Out: serial
- Err: serial
- Probing for expansion boards, if none are connected you'll see a harmless I2C error.
- timed out in wait_for_pin: I2C_STAT=0
- I2C read: I/O error
- Unrecognized expansion board: 0
- Beagle Rev C4
- Die ID #2b9400040000000004037d070b01d013
- Hit any key to stop autoboot: 3 2 1 0
- mmc1 is available
- The user button is currently pressed.
- reading user.scr
- ** Unable to read "user.scr" from mmc 1:1 **
- reading uImage
- 3194800 bytes read
- reading ramdisk.gz
- ** Unable to read "ramdisk.gz" from mmc 1:1 **
- Booting from mmc ...
- ## Booting kernel from Legacy Image at 80200000 ...
- Image Name: Angstrom/2.6.32/beagleboard
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3194736 Bytes = 3 MB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux................................................................................................................................................................................................................. done, booting the kernel.
- [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Mon May 3 22:40:09 CEST 2010
- [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=720 buddy=unknown vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
- [ 0.000000] Beagle expansionboard: unknown
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 128MB 128MB = 256MB total
- [ 0.000000] Memory: 240384KB available (5892K code, 676K data, 208K init, 0K highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
- [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Calibrating delay loop... 488.41 BogoMIPS (lpj=1908736)
- [ 0.000000] Mount-cache hash table entries: 512
- [ 0.000000] CPU: Testing write buffer coherency: ok
- [ 0.000000] tmpfs: No value for mount option 'mode'
- [ 0.000000] devtmpfs: initialized
- [ 0.000000] regulator: core version 0.5
- [ 0.000000] NET: Registered protocol family 16
- [ 0.000000] Found NAND on CS0
- [ 0.000000] Registering NAND on CS0
- [ 0.000000] Unable to get DVI reset GPIO
- [ 0.000000] Target VDD1 OPP = 6, VDD2 OPP = 2
- [ 0.000000] omap3evmdc: Driver registration complete
- [ 13.773620] OMAP DMA hardware revision 4.0
- [ 13.782623] bio: create slab <bio-0> at 0
- [ 13.784271] SCSI subsystem initialized
- [ 13.786010] usbcore: registered new interface driver usbfs
- [ 13.786224] usbcore: registered new interface driver hub
- [ 13.786437] usbcore: registered new device driver usb
- [ 13.786895] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
- [ 13.790100] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 13.790130] twl4030: power (irq 373) chaining IRQs 376..383
- [ 13.790496] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 13.792205] regulator: VUSB1V5: 1500 mV normal standby
- [ 13.792510] regulator: VUSB1V8: 1800 mV normal standby
- [ 13.792816] regulator: VUSB3V1: 3100 mV normal standby
- [ 13.794342] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 13.794891] regulator: VMMC1: 1850 <--> 3150 mV normal standby
- [ 13.795257] regulator: VDAC: 1800 mV normal standby
- [ 13.795562] regulator: VPLL2: 1800 mV normal standby
- [ 13.795898] regulator: VSIM: 1800 <--> 3000 mV normal standby
- [ 13.796173] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
- [ 13.796478] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
- [ 13.798339] Switching to clocksource 32k_counter
- [ 13.810913] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- [ 13.813690] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- [ 13.813720] musb_hdrc musb_hdrc: MUSB HDRC host driver
- [ 13.813873] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- [ 13.814086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 13.814117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 13.814117] usb usb1: Product: MUSB HDRC host driver
- [ 13.814147] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
- [ 13.814239] usb usb1: SerialNumber: musb_hdrc
- [ 13.815002] hub 1-0:1.0: USB hub found
- [ 13.815063] hub 1-0:1.0: 1 port detected
- [ 13.816345] NET: Registered protocol family 2
- [ 13.816619] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 13.817291] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 13.817535] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- [ 13.817687] TCP: Hash tables configured (established 8192 bind 8192)
- [ 13.817687] TCP reno registered
- [ 13.817718] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 13.817749] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 13.818054] NET: Registered protocol family 1
- [ 13.818603] RPC: Registered udp transport module.
- [ 13.818603] RPC: Registered tcp transport module.
- [ 13.818634] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 13.819793] omap-iommu omap-iommu.0: isp registered
- [ 13.819976] OMAP35x Linux PSP version 03.00.00.05 (OMAP3EVM)
- [ 13.822082] VFS: Disk quotas dquot_6.5.2
- [ 13.822204] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 13.823577] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 13.824615] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 13.825653] msgmni has been set to 470
- [ 13.831115] alg: No test for stdrng (krng)
- [ 13.831451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 13.831481] io scheduler noop registered
- [ 13.831481] io scheduler deadline registered
- [ 13.831695] io scheduler cfq registered (default)
- [ 13.892486] OMAP DSS rev 2.0
- [ 13.892547] OMAP DISPC rev 3.0
- [ 13.892608] OMAP VENC rev 2
- [ 13.892913] OMAP DSI rev 1.0
- [ 14.233428] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 14.254608] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
- [ 14.274841] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
- [ 14.295074] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
- [ 14.846282] console [ttyS2] enabled
- [ 14.858703] brd: module loaded
- [ 14.866210] loop: module loaded
- [ 14.870971] omap2-nand driver initializing
- [ 14.875396] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
- [ 14.884735] cmdlinepart partition parsing not available
- [ 14.889984] Creating 5 MTD partitions on "omap2-nand":
- [ 14.895202] 0x000000000000-0x000000080000 : "X-Loader"
- [ 14.901885] 0x000000080000-0x000000260000 : "U-Boot"
- [ 14.908630] 0x000000260000-0x000000280000 : "U-Boot Env"
- [ 14.914916] 0x000000280000-0x000000680000 : "Kernel"
- [ 14.922485] 0x000000680000-0x000010000000 : "File System"
- [ 15.033081] usbcore: registered new interface driver catc
- [ 15.038513] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
- [ 15.044616] usbcore: registered new interface driver kaweth
- [ 15.050262] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
- [ 15.057952] usbcore: registered new interface driver pegasus
- [ 15.063629] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- [ 15.070709] usbcore: registered new interface driver rtl8150
- [ 15.076538] usbcore: registered new interface driver asix
- [ 15.082122] usbcore: registered new interface driver cdc_ether
- [ 15.088134] usbcore: registered new interface driver cdc_eem
- [ 15.093933] usbcore: registered new interface driver dm9601
- [ 15.099731] usbcore: registered new interface driver smsc95xx
- [ 15.105651] usbcore: registered new interface driver gl620a
- [ 15.111389] usbcore: registered new interface driver net1080
- [ 15.117187] usbcore: registered new interface driver plusb
- [ 15.122863] usbcore: registered new interface driver rndis_host
- [ 15.128967] usbcore: registered new interface driver cdc_subset
- [ 15.135070] usbcore: registered new interface driver zaurus
- [ 15.140777] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 15.149078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 15.156066] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 15.162200] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
- [ 15.169891] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- [ 15.189147] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 15.195068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 15.201965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 15.209289] usb usb2: Product: OMAP-EHCI Host Controller
- [ 15.214660] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
- [ 15.220092] usb usb2: SerialNumber: ehci-omap.0
- [ 15.225524] hub 2-0:1.0: USB hub found
- [ 15.229370] hub 2-0:1.0: 3 ports detected
- [ 15.259613] Initializing USB Mass Storage driver...
- [ 15.264739] usbcore: registered new interface driver usb-storage
- [ 15.270843] USB Mass Storage support registered.
- [ 15.276031] mice: PS/2 mouse device common for all mice
- [ 15.281799] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 15.289886] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
- [ 15.300750] i2c /dev entries driver
- [ 15.305053] Linux video capture interface: v2.00
- [ 15.310058] omap-iommu omap-iommu.0: isp: version 1.1
- [ 15.316955] vpfe_init
- [ 15.319915] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 15.431762] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
- [ 15.438842] Registered led device: beagleboard::usr0
- [ 15.444061] Registered led device: beagleboard::usr1
- [ 15.450256] Registered led device: beagleboard::pmu_stat
- [ 15.458099] usbcore: registered new interface driver usbhid
- [ 15.463775] usbhid: USB HID core driver
- [ 15.467864] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 15.474945] usbcore: registered new interface driver snd-usb-audio
- [ 15.557159] usb 2-2: new high speed USB device using ehci-omap and address 2
- [ 15.566925] No device for DAI omap-mcbsp-dai-0
- [ 15.571411] No device for DAI omap-mcbsp-dai-1
- [ 15.575927] No device for DAI omap-mcbsp-dai-2
- [ 15.580444] No device for DAI omap-mcbsp-dai-3
- [ 15.584899] No device for DAI omap-mcbsp-dai-4
- [ 15.589416] OMAP3 Beagle SoC init
- [ 15.594543] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 15.607757] ALSA device list:
- [ 15.610748] #0: omap3beagle (twl4030)
- [ 15.614776] oprofile: using arm/armv7
- [ 15.618804] TCP cubic registered
- [ 15.622070] NET: Registered protocol family 17
- [ 15.626617] NET: Registered protocol family 15
- [ 15.631225] lib80211: common routines for IEEE802.11 drivers
- [ 15.636993] ThumbEE CPU extension supported.
- [ 15.641265] Power Management for TI OMAP3.
- [ 15.646728] ------------[ cut here ]------------
- [ 15.651397] WARNING: at arch/arm/mach-omap2/dpll.c:439 omap3_noncore_dpll_set_rate+0x228/0x26c()
- [ 15.660217] Modules linked in:
- [ 15.663330] [<c0041cb8>] (unwind_backtrace+0x0/0xdc) from [<c006de60>] (warn_slowpath_common+0x4c/0x80)
- [ 15.672790] [<c006de60>] (warn_slowpath_common+0x4c/0x80) from [<c004c288>] (omap3_noncore_dpll_set_rate+0x228/0x26c)
- [ 15.683471] [<c004c288>] (omap3_noncore_dpll_set_rate+0x228/0x26c) from [<c004a83c>] (omap2_clk_set_rate+0x24/0x34)
- [ 15.693969] [<c004a83c>] (omap2_clk_set_rate+0x24/0x34) from [<c0051ce8>] (clk_set_rate+0x4c/0xbc)
- [ 15.703002] [<c0051ce8>] (clk_set_rate+0x4c/0xbc) from [<c0010c44>] (omap2_clk_set_freq+0x264/0x410)
- [ 15.712188] [<c0010c44>] (omap2_clk_set_freq+0x264/0x410) from [<c0010754>] (omap3_sr_init+0xe0/0x174)
- [ 15.721557] [<c0010754>] (omap3_sr_init+0xe0/0x174) from [<c003c384>] (do_one_initcall+0x5c/0x1bc)
- [ 15.730560] [<c003c384>] (do_one_initcall+0x5c/0x1bc) from [<c0008414>] (kernel_init+0xa4/0x128)
- [ 15.739410] [<c0008414>] (kernel_init+0xa4/0x128) from [<c003d9fc>] (kernel_thread_exit+0x0/0x8)
- [ 15.748260] ---[ end trace 02d6834eef16587f ]---
- [ 15.753265] Switched to new clocking rate (Crystal/Core/MPU): 26.0/166/720 MHz
- [ 15.760589] IVA2 clocking rate: 520 MHz
- [ 15.946838] SmartReflex driver initialized
- [ 15.960052] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- [ 15.968719] registered taskstats version 1
- [ 15.974243] fbcvt: 640x480@60: CVT Name - .307M3-R
- [ 15.995452] Console: switching to colour frame buffer device 80x30
- [ 16.009307] regulator_init_complete: incomplete constraints, leaving VDAC on
- [ 16.017059] omap_vout omap_vout: probed for an unknown device
- [ 16.023498] Waiting for root device /dev/mmcblk0p2...
- [ 16.048553] mmc0: new high speed SDHC card at address 0001
- [ 16.054656] mmcblk0: mmc0:0001 00000 7.60 GiB
- [ 16.059631] mmcblk0: p1 p2
- [ 16.137176] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
- [ 16.144287] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 16.151855] usb 2-2: Product: USB2.0 Hub
- [ 16.157592] hub 2-2:1.0: USB hub found
- [ 16.161773] hub 2-2:1.0: 4 ports detected
- [ 16.455291] usb 2-2.1: new full speed USB device using ehci-omap and address 3
- [ 16.581512] usb 2-2.1: New USB device found, idVendor=0fe6, idProduct=8101
- [ 16.588500] usb 2-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
- [ 16.595916] usb 2-2.1: Product: USB Network Controller
- [ 16.607879] eth0: register 'dm9601' at usb-ehci-omap.0-2.1, Davicom DM9601 USB Ethernet, 00:10:13:50:a3:43
- [ 19.574554] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
- [ 19.583862] kjournald starting. Commit interval 5 seconds
- [ 19.793518] EXT3-fs (mmcblk0p2): using internal journal
- [ 19.798858] EXT3-fs (mmcblk0p2): recovery complete
- [ 19.806457] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
- [ 19.813659] VFS: Mounted root (ext3 filesystem) on device 179:2.
- [ 19.821441] devtmpfs: mounted
- [ 19.824584] Freeing init memory: 208K
- INIT: version 2.86 booting
- Please wait: booting...
- Starting udev
- udevd[68]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-huawei-e220.rules:1
- udevd[68]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-huawei-e220.rules:3
- udevd[68]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-huawei-e220.rules:5
- [ 20.665466] udev: starting version 151
- udevd-work[72]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[73]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[80]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[79]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[78]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[86]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[74]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[97]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[111]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[93]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[92]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[90]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[109]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[113]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[91]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[89]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[112]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[96]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[110]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[123]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[127]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[132]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[128]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[126]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[142]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[108]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[152]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[133]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[143]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[141]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[161]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[165]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[167]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[157]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[166]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[153]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[172]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[156]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[158]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[185]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[190]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[174]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[173]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[189]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[193]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[184]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- Remounting root file system...
- udevd-work[269]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[270]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[276]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[275]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[279]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[287]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[280]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[286]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[285]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[288]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[291]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[303]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[306]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[289]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[305]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[281]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[290]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[299]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[300]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[308]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[302]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[307]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 26.751708] usbcore: registered new interface driver usbserial
- Caching udev devnodes
- Populating dev cache[ 26.988250] USB Serial support registered for generic
- udevd-work[463]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[464]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 27.198272] usbcore: registered new interface driver usbserial_generic
- udevd-work[465]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 27.377990] usbserial: USB Serial Driver core
- udevd-work[526]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[89]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[73]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[93]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[91]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[90]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[92]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[86]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[110]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[111]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[96]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[109]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[112]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[97]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[80]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[113]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[78]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[108]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[123]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[74]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[72]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[126]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevadm settle - timeout of 8 seconds reached, the event queue contains:
- /sys/devices/platform/ehci-omap.0/usb2/2-0:1.0 (573)
- /sys/devices/platform/ehci-omap.0/usb2/2-2 (574)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/2-2.1 (575)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/2-2.1/2-2.1:1.0 (576)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/2-2.1/2-2.1:1.0/net/eth0 (577)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/2-2.1/usb_device/usbdev2.3 (578)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/2-2:1.0 (579)
- /sys/devices/platform/ehci-omap.0/usb2/2-2/usb_device/usbdev2.2 (580)
- /sys/devices/platform/ehci-omap.0/usb2/usb_device/usbdev2.1 (581)
- /sys/devices/platform/gpio-keys/input/input0 (583)
- /sys/devices/platform/gpio-keys/input/input0/event0 (584)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-0048 (586)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-0049 (587)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_gpio/gpio/gpiochip192 (588)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 (589)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1/event1 (590)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004a (591)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b (592)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.17/regulator/regulator.0 (593)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.18/regulator/regulator.1 (594)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.19/regulator/regulator.2 (595)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.3/regulator/regulator.4 (596)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.5/regulator/regulator.5 (597)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.6/regulator/regulator.3 (598)
- /sys/devices/platform/i2c_omap.1/i2c-1/1-004b/twl_reg.8/regulator/regulator.6 (599)
- /sys/devices/platform/i2c_omap.1/i2c-1/i2c-dev/i2c-1 (600)
- /sys/devices/platform/i2c_omap.2/i2c-2/i2c-dev/i2c-2 (602)
- /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3 (604)
- /sys/devices/platform/mmci-omap-hs.0/mmc_host/mmc0/mmc0:0001 (609)
- /sys/devices/platform/mmci-omap-hs.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0 (610)
- /sys/devices/platform/mmci-omap-hs.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1 (611)
- /sys/devices/platform/mmci-omap-hs.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2 (612)
- /sys/devices/platform/musb_hdrc/usb1/1-0:1.0 (614)
- /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1 (615)
- /sys/devices/platform/soc-audio/sound/card0/audio (622)
- /sys/devices/platform/soc-audio/sound/card0/dsp (623)
- /sys/devices/platform/soc-audio/sound/card0/mixer (624)
- /sys/devices/platform/soc-audio/sound/card0/pcmC0D0c (625)
- /sys/devices/platform/soc-audio/sound/card0/pcmC0D0p (626)
- /sys/devices/platform/soc-audio/sound/card0/controlC0 (627)
- /sys/devices/virtual/block/loop0 (655)
- /sys/devices/virtual/block/loop1 (656)
- /sys/devices/virtual/block/loop2 (657)
- /sys/devices/virtual/block/loop3 (658)
- /sys/devices/virtual/block/loop4 (659)
- /sys/devices/virtual/block/loop5 (660)
- /sys/devices/virtual/block/loop6 (661)
- /sys/devices/virtual/block/loop7 (662)
- /sys/devices/virtual/block/ram0 (663)
- /sys/devices/virtual/block/ram1 (664)
- /sys/devices/virtual/block/ram10 (665)
- /sys/devices/virtual/block/ram11 (666)
- /sys/devices/virtual/block/ram12 (667)
- /sys/devices/virtual/block/ram13 (668)
- /sys/devices/virtual/block/ram14 (669)
- /sys/devices/virtual/block/ram15 (670)
- /sys/devices/virtual/block/ram2 (671)
- /sys/devices/virtual/block/ram3 (672)
- /sys/devices/virtual/block/ram4 (673)
- /sys/devices/virtual/block/ram5 (674)
- /sys/devices/virtual/block/ram6 (675)
- /sys/devices/virtual/block/ram7 (676)
- /sys/devices/virtual/block/ram8 (677)
- /sys/devices/virtual/block/ram9 (678)
- /sys/devices/virtual/mtd/mtd0/mtdblock0 (687)
- /sys/devices/virtual/mtd/mtd1/mtdblock1 (690)
- /sys/devices/virtual/mtd/mtd2/mtdblock2 (693)
- /sys/devices/virtual/mtd/mtd3/mtdblock3 (696)
- /sys/devices/virtual/mtd/mtd4/mtdblock4 (699)
- /sys/devices/virtual/net/lo (701)
- /sys/module/usbserial (706)
- /sys/bus/usb-serial (707)
- /sys/bus/usb/drivers/usbserial (708)
- /sys/bus/usb-serial/drivers/generic (709)
- /sys/bus/usb/drivers/usbserial_generic (710)
- /sys/devices/platform/soc-audio/sound/card0 (711)
- udevd-work[127]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[128]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[132]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[252]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[244]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[210]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[195]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[262]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[199]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[79]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[240]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[257]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[211]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[194]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[198]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[255]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[221]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[196]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[243]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[216]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[222]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[218]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[263]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[217]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[250]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[256]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[261]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[220]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[133]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[141]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[142]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 30.965728] Bluetooth: Core ver 2.15
- [ 30.980651] NET: Registered protocol family 31
- [ 30.985168] Bluetooth: HCI device and connection manager initialized
- udevd-work[143]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[152]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 31.025299] Bluetooth: HCI socket layer initialized
- [ 31.053588] Bluetooth: L2CAP ver 2.14
- [ 31.064239] Bluetooth: L2CAP socket layer initialized
- udevd-work[153]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 31.104583] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- udevd-work[157]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[156]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 31.305908] NET: Registered protocol family 10
- udevd-work[158]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 31.400451] Bluetooth: RFCOMM TTY layer initialized
- [ 31.405395] Bluetooth: RFCOMM socket layer initialized
- udevd-work[161]: '/sbin/huaweiAktBbo' unexpected exit with statu[ 31.423583] Bluetooth: RFCOMM ver 1.11
- s 0x0006
- ALSA: Restoring mixer settings...
- Configuring network interfaces... udevd-work[165]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- [ 33.363647] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- eth0 no wireless extensions.
- udhcpc (v1.13.2) started
- udevd-work[86]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[91]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[92]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[90]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[108]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[93]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[89]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[78]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[109]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[110]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[111]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[96]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- udevd-work[74]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
- Sending discover...
- Sending select for 192.168.1.194...
- Lease of 192.168.1.194 obtained, lease time 86400
- [ 34.502716] quiet_error: 46 callbacks suppressed
- run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
- adding dns 195.175.39.40
- adding dns 195.175.39.39
- ifconfig: SIOCGIFFLAGS: No such device
- udevd-work[73]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- ifconfig: SIOCGIFFLAGS: No such device
- usb0 No such device
- ifconfig: SIOCGIFFLAGS: No such device
- done.
- Starting portmap daemon: portmap.
- udevd-work[72]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- net.ipv4.conf.default.rp_filter = 1
- net.ipv4.conf.all.rp_filter = 1
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Thu Jun 17 19:27:00 UTC 2010
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- INIT: Entering runlevel: 5
- Starting system message bus: Unknown username "system" in message bus configuration file
- dbus.
- Starting Connection Manager
- udevd-work[79]: '/sbin/huaweiAktBbo' unexpected exit with status 0x0006
- Starting Dropbear SSH server: dropbear.
- Starting advanced power management daemon: No APM support in kernel
- (failed.)
- Starting syslogd/klogd: done
- * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
- [A[74G[ ok ]
- cups: started scheduler.
- .-------.
- | | .-.
- | | |-----.-----.-----.| | .----..-----.-----.
- | | | __ | ---'| '--.| .-'| | |
- | | | | | |--- || --'| | | ' | | | |
- '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
- -' |
- '---'
- The Angstrom Distribution beagleboard ttyS2
- Angstrom 2010.7-test-20100823 beagleboard ttyS2
- beagleboard login: [ 41.029022] quiet_error: 23 callbacks suppressed
- root
- Login incorrect
- Login incorrect
- Login incorrect
- Login incorrect
- Login incorrect
- Maximum number of tries exceeded (5)
- beagleboard login: root
- .-------.
- | | .-.
- | | |-----.-----.-----.| | .----..-----.-----.
- | | | __ | ---'| '--.| .-'| | |
- | | | | | |--- || --'| | | ' | | | |
- '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
- -' |
- '---'
- The Angstrom Distribution beagleboard ttyS2
- Angstrom 2010.7-test-20100823 beagleboard ttyS2
- beagleboard login: root
- Login incorrect
- Login incorrect
- Login incorrect
- Login incorrect
- Login incorrect
- Maximum number of tries exceeded (5)
- beagleboard login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement