API tools faq
paste
Guest User

beagleboard-xm bootup

a guest
Jul 5th, 2012
78
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 21.37 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2011.12-dirty (May 18 2012 - 01:52:55)
  2. Texas Instruments Revision detection unimplemented
  3. OMAP SD/MMC: 0
  4. timed out in wait_for_bb: I2C_STAT=1000
  5. reading u-boot.img
  6. reading u-boot.img
  7.  
  8.  
  9. U-Boot 2011.12-dirty (May 18 2012 - 01:52:55)
  10.  
  11. OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  12. OMAP3 Beagle board + LPDDR/NAND
  13. I2C:   ready
  14. DRAM:  512 MiB
  15. NAND:  0 MiB
  16. MMC:   OMAP SD/MMC: 0
  17. *** Warning - readenv() failed, using default environment
  18.  
  19. In:    serial
  20. Out:   serial
  21. Err:   serial
  22. Beagle xM Rev C
  23. No EEPROM on expansion board
  24. No EEPROM on expansion board
  25. Die ID #363000029ff800000168300f0d02801a
  26. Net:   Net Initialization Skipped
  27. No ethernet found.
  28. Hit any key to stop autoboot:  0
  29. The user button is currently NOT pressed.
  30. SD/MMC found on device 0
  31. reading uEnv.txt
  32.  
  33. 128 bytes read
  34. Loaded environment from uEnv.txt
  35. Importing environment from mmc ...
  36. Loading file "/boot/uImage" from mmc device 0:2 xxa2
  37. 4516376 bytes read
  38. Booting from mmc ...
  39. ## Booting kernel from Legacy Image at 80200000 ...
  40.    Image Name:   Linux-3.5.0-rc1
  41.    Image Type:   ARM Linux Kernel Image (uncompressed)
  42.    Data Size:    4516312 Bytes = 4.3 MiB
  43.    Load Address: 80008000
  44.    Entry Point:  80008000
  45.    Verifying Checksum ... OK
  46.    Loading Kernel Image ... OK
  47. OK
  48.  
  49. Starting kernel ...
  50.  
  51. Uncompressing Linux... done, booting the kernel.
  52. [    0.071777] gpmc: irq-20 could not claim: err -22
  53. [    0.078460] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
  54. [    0.084228] dpll3_m2_clk rate change failed: -22
  55. [    0.130554] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
  56. [    0.130554] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
  57. [    2.874664] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  58. systemd-fsck[54]: rootfs: clean, 54778/116880 files, 285278/467200 blocks
  59.  
  60. .---O---.
  61. |       |                  .-.           o o
  62. |   |   |-----.-----.-----.| |   .----..-----.-----.
  63. |       |     | __  |  ---'| '--.|  .-'|     |     |
  64. |   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
  65. '---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
  66.                 -'  |
  67.                '---'
  68.  
  69. The Angstrom Distribution beagleboard ttyO2
  70.  
  71. Angstrom v2012.05 - Kernel 3.5.0-rc1
  72.  
  73. beagleboard login: root
  74. Last login: Tue Jul  3 16:12:27 UTC 2012 on ttyO2
  75. root@beagleboard:~# dmesg
  76. [    0.000000] Booting Linux on physical CPU 0
  77. [    0.000000] Initializing cgroup subsys cpuset
  78. [    0.000000] Initializing cgroup subsys cpu
  79. [    0.000000] Linux version 3.5.0-rc1 (vdev@vhost) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #1 Sat Jun 30 01:32:28 CEST 2012
  80. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  81. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  82. [    0.000000] Machine: OMAP3 Beagle Board
  83. [    0.000000] Reserving 18874368 bytes SDRAM for VRAM
  84. [    0.000000] cma: CMA: reserved 16 MiB at 9d000000
  85. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  86. [    0.000000] On node 0 totalpages: 124672
  87. [    0.000000] free_area_init_node: node 0, pgdat c082e5dc, node_mem_map c08ec000
  88. [    0.000000]   Normal zone: 1024 pages used for memmap
  89. [    0.000000]   Normal zone: 0 pages reserved
  90. [    0.000000]   Normal zone: 123648 pages, LIFO batch:31
  91. [    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  92. [    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  93. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  94. [    0.000000] pcpu-alloc: [0] 0
  95. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123648
  96. [    0.000000] Kernel command line: console=ttyO2,115200n8 run_hardware_tests quiet mpurate=1000 buddy=none buddy2=none camera=lbcm5m03 vram=18M omap                                                                                        fb.mode=dvi:1280x1024MR-16@60 omapfb.vram=0:10M,1:4M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
  97. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  98. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  99. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  100. [    0.000000] allocated 1048576 bytes of page_cgroup
  101. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  102. [    0.000000] Memory: 487MB = 487MB total
  103. [    0.000000] Memory: 467572k/467572k available, 56716k reserved, 0K highmem
  104. [    0.000000] Virtual kernel memory layout:
  105. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  106. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  107. [    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
  108. [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  109. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  110. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  111. [    0.000000]       .text : 0xc0008000 - 0xc077ac28   (7628 kB)
  112. [    0.000000]       .init : 0xc077b000 - 0xc07c2000   ( 284 kB)
  113. [    0.000000]       .data : 0xc07c2000 - 0xc0830ff0   ( 444 kB)
  114. [    0.000000]        .bss : 0xc0831014 - 0xc08ebee4   ( 748 kB)
  115. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  116. [    0.000000] NR_IRQS:474
  117. [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  118. [    0.000000] Total of 96 interrupts on 1 active controller
  119. [    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  120. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  121. [    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  122. [    0.000000] Console: colour dummy device 80x30
  123. [    0.033294] Calibrating delay loop... 509.42 BogoMIPS (lpj=1990656)
  124. [    0.033294] pid_max: default: 32768 minimum: 301
  125. [    0.033538] Security Framework initialized
  126. [    0.033569] AppArmor: AppArmor initialized
  127. [    0.033813] Mount-cache hash table entries: 512
  128. [    0.034484] Initializing cgroup subsys cpuacct
  129. [    0.034484] Initializing cgroup subsys memory
  130. [    0.034545] Initializing cgroup subsys devices
  131. [    0.034545] Initializing cgroup subsys freezer
  132. [    0.034545] Initializing cgroup subsys blkio
  133. [    0.034576] Initializing cgroup subsys perf_event
  134. [    0.034729] CPU: Testing write buffer coherency: ok
  135. [    0.034942] Setting up static identity map for 0x8054a438 - 0x8054a490
  136. [    0.035888] devtmpfs: initialized
  137. [    0.036865] initlevel:0=early, 4 registered initcalls
  138. [    0.037384] initlevel:1=core, 26 registered initcalls
  139. [    0.068176] dummy:
  140. [    0.069396] NET: Registered protocol family 16
  141. [    0.069458] initlevel:2=postcore, 19 registered initcalls
  142. [    0.071563] DMA: preallocated 256 KiB pool for atomic coherent allocations
  143. [    0.071746] GPMC revision 5.0
  144. [    0.071777] gpmc: irq-20 could not claim: err -22
  145. [    0.073120] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  146. [    0.073211] OMAP GPIO hardware version 2.5
  147. [    0.073394] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  148. [    0.073577] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  149. [    0.073730] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  150. [    0.073913] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
  151. [    0.074066] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
  152. [    0.074523] initlevel:3=arch, 15 registered initcalls
  153. [    0.074859] omap_mux_init: Add partition: #1: core, flags: 0
  154. [    0.076049] OMAP3 Beagle Rev: xM C
  155. [    0.078460] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
  156. [    0.084197] Reprogramming SDRC clock to 400000000 Hz
  157. [    0.084228] dpll3_m2_clk rate change failed: -22
  158. [    0.085968]  usbhs_omap: alias fck already exists
  159. [    0.086059] Found NAND on CS0
  160. [    0.086059] Registering NAND on CS0
  161. [    0.086547] hw-breakpoint: debug architecture 0x4 unsupported.
  162. [    0.089172]  omap-mcbsp.2: alias fck already exists
  163. [    0.089324]  omap-mcbsp.3: alias fck already exists
  164. [    0.090148] Switched to new clocking rate (Crystal/Core/MPU): 26.0/400/1000 MHz
  165. [    0.090270] OMAP DMA hardware revision 5.0
  166. [    0.090362] initlevel:4=subsys, 57 registered initcalls
  167. [    0.094238] bio: create slab <bio-0> at 0
  168. [    0.094940] SCSI subsystem initialized
  169. [    0.095123] usbcore: registered new interface driver usbfs
  170. [    0.095153] usbcore: registered new interface driver hub
  171. [    0.095306] usbcore: registered new device driver usb
  172. [    0.095611] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
  173. [    0.097625] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
  174. [    0.097686] twl 1-0048: power (irq 325) chaining IRQs 328..335
  175. [    0.098022] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
  176. [    0.098236] gpiochip_add: registered GPIOs 192 to 211 on device: twl4030
  177. [    0.099243] VUSB1V5: 1500 mV normal standby
  178. [    0.099517] VUSB1V8: 1800 mV normal standby
  179. [    0.099761] VUSB3V1: 3100 mV normal standby
  180. [    0.101043] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  181. [    0.101379] vdd_mpu_iva: 600 <--> 1450 mV normal
  182. [    0.101623] vdd_core: 600 <--> 1450 mV normal
  183. [    0.101928] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  184. [    0.102203] VDAC: 1800 mV normal standby
  185. [    0.102539] VDVI: 1800 mV normal standby
  186. [    0.102905] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  187. [    0.103271] VAUX3: 1800 mV normal standby
  188. [    0.103637] VAUX4: 1800 mV normal standby
  189. [    0.113098] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
  190. [    0.113342] Linux media interface: v0.10
  191. [    0.113677] omap-iommu omap-iommu.0: isp registered
  192. [    0.114074] NetLabel: Initializing
  193. [    0.114074] NetLabel:  domain hash size = 128
  194. [    0.114074] NetLabel:  protocols = UNLABELED CIPSOv4
  195. [    0.114135] NetLabel:  unlabeled traffic allowed by default
  196. [    0.114135] initlevel:5=fs, 24 registered initcalls
  197. [    0.114349] Switching to clocksource 32k_counter
  198. [    0.124023] AppArmor: AppArmor Filesystem Enabled
  199. [    0.130554] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
  200. [    0.130554] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
  201. [    0.131042] NET: Registered protocol family 2
  202. [    0.131225] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  203. [    0.131500] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  204. [    0.131713] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  205. [    0.131835] TCP: Hash tables configured (established 16384 bind 16384)
  206. [    0.131866] TCP: reno registered
  207. [    0.131866] UDP hash table entries: 256 (order: 0, 4096 bytes)
  208. [    0.131866] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  209. [    0.132080] NET: Registered protocol family 1
  210. [    0.132324] RPC: Registered named UNIX socket transport module.
  211. [    0.132354] RPC: Registered udp transport module.
  212. [    0.132354] RPC: Registered tcp transport module.
  213. [    0.132354] RPC: Registered tcp NFSv4.1 backchannel transport module.
  214. [    0.132507] initlevel:6=device, 232 registered initcalls
  215. [    0.132720] omap_dsp_init: 600000 bytes @ 9e800000
  216. [    0.133941] audit: initializing netlink socket (disabled)
  217. [    0.133972] type=2000 audit(0.148:1): initialized
  218. [    0.260467] VFS: Disk quotas dquot_6.5.2
  219. [    0.260620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  220. [    0.262207] NFS: Registering the id_resolver key type
  221. [    0.262268] Key type id_resolver registered
  222. [    0.262695] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  223. [    0.262695] fuse init (API version 7.18)
  224. [    0.263946] Btrfs loaded
  225. [    0.263977] msgmni has been set to 945
  226. [    0.264923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  227. [    0.265014] io scheduler noop registered
  228. [    0.265014] io scheduler deadline registered
  229. [    0.265045] io scheduler cfq registered (default)
  230. [    0.265624] OMAP DSS rev 2.0
  231. [    0.267242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  232. [    0.268035] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  233. [    0.268280] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  234. [    0.268524] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  235. [    0.300842] console [ttyO2] enabled
  236. [    0.301086] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  237. [    0.301422] [drm] Initialized drm 1.1.0 20060810
  238. [    0.305572] brd: module loaded
  239. [    0.307617] loop: module loaded
  240. [    0.312591] twl4030_madc twl4030_madc: clk disabled, enabling
  241. [    0.314575] No NAND device found
  242. [    0.314819] No NAND device found
  243. [    0.314910] OneNAND driver initializing
  244. [    0.316070] usbcore: registered new interface driver cdc_ether
  245. [    0.316131] usbcore: registered new interface driver rndis_host
  246. [    0.316192] usbcore: registered new interface driver cdc_ncm
  247. [    0.316467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  248. [    0.316528] ehci-omap.0 supply hsusb0 not found, using dummy regulator
  249. [    0.316589] ehci-omap.0 supply hsusb1 not found, using dummy regulator
  250. [    2.325592] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  251. [    2.325805] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  252. [    2.326202] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  253. [    2.341278] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  254. [    2.341369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  255. [    2.341369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  256. [    2.341400] usb usb1: Product: OMAP-EHCI Host Controller
  257. [    2.341400] usb usb1: Manufacturer: Linux 3.5.0-rc1 ehci_hcd
  258. [    2.341400] usb usb1: SerialNumber: ehci-omap.0
  259. [    2.341857] hub 1-0:1.0: USB hub found
  260. [    2.341857] hub 1-0:1.0: 3 ports detected
  261. [    2.372436] Initializing USB Mass Storage driver...
  262. [    2.372528] usbcore: registered new interface driver usb-storage
  263. [    2.372528] USB Mass Storage support registered.
  264. [    2.372589] usbcore: registered new interface driver libusual
  265. [    2.382446] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  266. [    2.382446] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  267. [    2.382476] musb-hdrc: MHDRC RTL version 1.800
  268. [    2.382476] musb-hdrc: setup fifo_mode 4
  269. [    2.382476] musb-hdrc: 28/31 max ep, 16384/16384 memory
  270. [    2.382690] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  271. [    2.383422] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
  272. [    2.383758] mousedev: PS/2 mouse device common for all mice
  273. [    2.384307] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
  274. [    2.384704] i2c /dev entries driver
  275. [    2.384948] lirc_dev: IR Remote Control driver registered, major 248
  276. [    2.384948] IR SANYO protocol handler initialized
  277. [    2.384948] Driver for 1-wire Dallas network protocol.
  278. [    2.385833] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  279. [    2.385986] cpuidle: using governor ladder
  280. [    2.386016] cpuidle: using governor menu
  281. [    2.386047] sdhci: Secure Digital Host Controller Interface driver
  282. [    2.386047] sdhci: Copyright(c) Pierre Ossman
  283. [    2.386566] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
  284. [    2.669403] usb 1-2: new high-speed USB device number 2 using ehci-omap
  285. [    2.755462] Registered led device: beagleboard::usr0
  286. [    2.755523] Registered led device: beagleboard::usr1
  287. [    2.758361] Registered led device: beagleboard::pmu_stat
  288. [    2.758605] oprofile: hardware counters not available
  289. [    2.758605] oprofile: using timer interrupt.
  290. [    2.758941] TCP: cubic registered
  291. [    2.759368] NET: Registered protocol family 10
  292. [    2.759918] NET: Registered protocol family 17
  293. [    2.760101] Key type dns_resolver registered
  294. [    2.760101] initlevel:7=late, 32 registered initcalls
  295. [    2.760314] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  296. [    2.765594] ThumbEE CPU extension supported.
  297. [    2.765624] Registering SWP/SWPB emulation handler
  298. [    2.765655] sr_init: No PMIC hook to init smartreflex
  299. [    2.765747] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  300. [    2.765869] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  301. [    2.765930] SmartReflex Class3 initialized
  302. [    2.766235] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 100 kHz
  303. [    2.769592] clock: disabling unused clocks to save power
  304. [    2.770324] registered taskstats version 1
  305. [    2.770538] fbcvt: 1280x1024@60: CVT Name - 1.310M4-R
  306. [    2.826263] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
  307. [    2.826293] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  308. [    2.826965] hub 1-2:1.0: USB hub found
  309. [    2.827209] hub 1-2:1.0: 5 ports detected
  310. [    2.859191] Console: switching to colour frame buffer device 160x64
  311. [    2.871459] mmc0: host does not support reading read-only switch. assuming write-enable.
  312. [    2.872161] VAUX3: incomplete constraints, leaving on
  313. [    2.872558] VDAC: incomplete constraints, leaving on
  314. [    2.873504] mmc0: new high speed SD card at address d1d5
  315. [    2.873962] mmcblk0: mmc0:d1d5 SD02G 1.83 GiB
  316. [    2.874664] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  317. [    2.881622]  mmcblk0: p1 p2
  318. [    2.893829] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  319. [    2.893859] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  320. [    2.902679] devtmpfs: mounted
  321. [    2.902984] Freeing init memory: 284K
  322. [    3.114929] usb 1-2.1: new high-speed USB device number 3 using ehci-omap
  323. [    3.232574] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
  324. [    3.232604] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  325. [    3.318023] usb 1-2.2: new low-speed USB device number 4 using ehci-omap
  326. [    3.442291] usb 1-2.2: New USB device found, idVendor=045e, idProduct=00a4
  327. [    3.442321] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  328. [    3.442321] usb 1-2.2: Product: Microsoft(R) Compact Optical Mouse
  329. [    3.442352] usb 1-2.2: Manufacturer: Microsoft
  330. [    3.528900] usb 1-2.4: new low-speed USB device number 5 using ehci-omap
  331. [    3.651031] usb 1-2.4: New USB device found, idVendor=046a, idProduct=0023
  332. [    3.651062] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  333. [    3.678649] udevd[55]: starting version 182
  334. [    3.731781] Bluetooth: Core ver 2.16
  335. [    3.731842] NET: Registered protocol family 31
  336. [    3.731872] Bluetooth: HCI device and connection manager initialized
  337. [    3.731872] Bluetooth: HCI socket layer initialized
  338. [    3.731872] Bluetooth: L2CAP socket layer initialized
  339. [    3.731903] Bluetooth: SCO socket layer initialized
  340. [    3.746246] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  341. [    3.775878] irda_init()
  342. [    3.775939] NET: Registered protocol family 23
  343. [    3.782867] IrCOMM protocol (Dag Brattli)
  344. [    3.832397] Bluetooth: RFCOMM TTY layer initialized
  345. [    3.832427] Bluetooth: RFCOMM socket layer initialized
  346. [    3.832427] Bluetooth: RFCOMM ver 1.11
  347. [    4.218200] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  348. [    4.308288] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1
  349. [    4.309295] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-ehci-omap.0-                                                                                        2.2/input0
  350. [    4.339324] usbcore: registered new interface driver usbhid
  351. [    4.339324] usbhid: USB HID core driver
  352. [    4.829772] input: gpio-keys as /devices/platform/gpio-keys/input/input2
  353. [    5.319793] Linux video capture interface: v2.00
  354. [    5.495727] omap3isp supply VDD_CSIPHY1 not found, using dummy regulator
  355. [    5.495819] omap3isp supply VDD_CSIPHY2 not found, using dummy regulator
  356. [    5.496002] omap3isp omap3isp: Revision 15.0 found
  357. [    5.496063] omap-iommu omap-iommu.0: isp: version 1.1
  358. [    5.496215] omap3isp omap3isp: hist: DMA channel = 0
  359. [    5.563659] ip_tables: (C) 2000-2006 Netfilter Core Team
  360. [    5.602478] nf_conntrack version 0.5.0 (7566 buckets, 30264 max)
  361. [    6.009246] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 21600000 Hz
  362. [    6.026123] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 0 Hz
  363. [    6.026123] mt9p031 2-0048: MT9P031 detected at address 0x48
  364. [    6.264099] twl_rtc twl_rtc: Enabling TWL-RTC
  365. [    6.340637] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  366. [    8.170043] smsc95xx v1.0.4
  367. [    8.349304] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 02:1c:0a:fd:ec:fd
  368. [    8.349456] usbcore: registered new interface driver smsc95xx
  369. [    8.431365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  370. [    9.471618] input: HID 046a:0023 as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.4/1-2.4:1.0/input/input3
  371. [    9.487762] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-ehci-omap.0-2.4/input0
  372. [    9.490997] input: HID 046a:0023 as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.4/1-2.4:1.1/input/input4
  373. [    9.491394] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-ehci-omap.0-2.4/input1
  374. [    9.808807] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 21600000 Hz
  375. [    9.836639] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 0 Hz
  376. [    9.874694] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  377. [    9.875854] smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  378. root@beagleboard:~#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!