Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2013.04-07297-g20bd663-dirty (Jun 16 2013 - 04:32:06)
- Board: A20-OLinuXino_MICRO
- DRAM: 512MB
- CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
- SUNXI SD/MMC: 0
- U-Boot 2013.04-07297-g20bd663-dirty (Jun 16 2013 - 04:32:06) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- Board: A20-OLinuXino_MICRO
- I2C: ready
- DRAM: 512 MiB
- MMC: SUNXI SD/MMC: 0
- In: serial
- Out: serial
- Err: serial
- Net: emac
- Hit any key to stop autoboot: 0
- reading script.bin
- 43532 bytes read in 9 ms (4.6 MiB/s)
- reading uImage
- 3397312 bytes read in 155 ms (20.9 MiB/s)
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.3.0+
- Created: 2013-06-16 1:26:25 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3397248 Bytes = 3.2 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Linux version 3.3.0+ (rz2k@Thessia) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #7 SMP PREEMPT Sun Jun 16 05:26:12 MSK 2013
- [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun7i
- [ 0.000000] Ignoring unrecognised tag 0x00000000
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] memblock reserve 43000000(10000) for sysconfig, ret=0
- [ 0.000000] memblock reserve 52000000(20000) for standby
- [ 0.000000] memblock remove 4a000000(2000000) for fb, ret=0
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] [scu_get_core_count] cores=1800001
- [ 0.000000] sun7i_init_early: enter
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0485000 s5632 r8192 d14848 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121728
- [ 0.000000] Kernel command line: console=/dev/ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=7 earlyprintk=1 mem=512MB
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 160MB 320MB = 480MB total
- [ 0.000000] Memory: 479264k/479264k available, 45024k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc061181c (6183 kB)
- [ 0.000000] .init : 0xc0612000 - 0xc063e600 ( 178 kB)
- [ 0.000000] .data : 0xc0640000 - 0xc0682ce0 ( 268 kB)
- [ 0.000000] .bss : 0xc0682d04 - 0xc06cdc80 ( 300 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:160
- [ 0.000000] aw_clkevt_init: timer base 0xe0800c00
- aw_clkevt_init: sun7i_timer0_clockevent mult 6442450, max_delta_ns 170000, min_delta_ns 1000, cpumask 0xc0458868, irq 54
- [ 0.000000] [aw_delay]: It is use use_time_delay function!
- [ 0.000000] aw_clksrc_init(96)
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] aw_clksrc_init(120)
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.012853] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
- [ 0.074242] pid_max: default: 32768 minimum: 301
- [ 0.076319] Mount-cache hash table entries: 512
- [ 0.081166] CPU: Testing write buffer coherency: ok
- [ 0.085592] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.091063] Setting up static identity map for 0x40455ab0 - 0x40455b08
- [ 0.204163] CPU1: Booted secondary processor
- [ 0.261251] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.261350] Brought up 2 CPUs
- [ 0.268570] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
- [ 0.275923] devtmpfs: initialized
- [ 0.282399] script_init enter!
- [ 0.283316] script_init exit!
- [ 0.286000] print_constraints: dummy:
- [ 0.288529] NET: Registered protocol family 16
- [ 0.294420] sun7i_init: enter
- [ 0.295831] [ccu-inf] aw clock manager init
- [ 0.299422] [ccu-inf] aw_ccu_init
- [ 0.302968] [ccu-inf] script config pll3 to 297MHz
- [ 0.307486] [ccu-inf] script config pll4 to 300MHz
- [ 0.312249] [ccu-inf] script config pll6 to 600MHz
- [ 0.317311] [ccu-inf] script config pll7 to 297MHz
- [ 0.321786] [ccu-inf] script config pll8 to 336MHz
- [ 0.327231] axp config [pmu_para] [pmu_used] : 1
- [ 0.331141] axp config [pmu_para] [pmu_twi_id] : 0
- [ 0.335907] axp config [pmu_para] [pmu_irq_id] : 32
- [ 0.340819] axp config [pmu_para] [pmu_twi_addr] : 52
- [ 0.345788] axp config [pmu_para] [pmu_battery_rdc] : 171
- [ 0.351170] axp config [pmu_para] [pmu_battery_cap] : 2700
- [ 0.356621] axp config [pmu_para] [pmu_init_chgcur] : 300
- [ 0.362029] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
- [ 0.367715] axp config [pmu_para] [pmu_resume_chgcur] : 300
- [ 0.373269] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
- [ 0.379067] axp config [pmu_para] [pmu_init_chgvol] : 4200
- [ 0.384545] axp config [pmu_para] [pmu_init_chgend_rate] : 15
- [ 0.390247] axp config [pmu_para] [pmu_init_chg_enabled] : 1
- [ 0.395892] axp config [pmu_para] [pmu_init_adc_freq] : 100
- [ 0.401430] axp config [pmu_para] [pmu_init_adc_freqc] : 100
- [ 0.407068] axp config [pmu_para] [pmu_init_chg_pretime] : 50
- [ 0.412783] axp config [pmu_para] [pmu_init_chg_csttime] : 720
- [ 0.418595] axp config [pmu_para] [pmu_bat_para1] : 0
- [ 0.423614] axp config [pmu_para] [pmu_bat_para2] : 0
- [ 0.428647] axp config [pmu_para] [pmu_bat_para3] : 0
- [ 0.433667] axp config [pmu_para] [pmu_bat_para4] : 0
- [ 0.438700] axp config [pmu_para] [pmu_bat_para5] : 5
- [ 0.443723] axp config [pmu_para] [pmu_bat_para6] : 11
- [ 0.448840] axp config [pmu_para] [pmu_bat_para7] : 13
- [ 0.453947] axp config [pmu_para] [pmu_bat_para8] : 15
- [ 0.459067] axp config [pmu_para] [pmu_bat_para9] : 19
- [ 0.464174] axp config [pmu_para] [pmu_bat_para10] : 32
- [ 0.469380] axp config [pmu_para] [pmu_bat_para11] : 50
- [ 0.474573] axp config [pmu_para] [pmu_bat_para12] : 58
- [ 0.479780] axp config [pmu_para] [pmu_bat_para13] : 71
- [ 0.484974] axp config [pmu_para] [pmu_bat_para14] : 81
- [ 0.490181] axp config [pmu_para] [pmu_bat_para15] : 89
- [ 0.495374] axp config [pmu_para] [pmu_bat_para16] : 100
- [ 0.500666] axp config [pmu_para] [pmu_usbvol_limit] : 1
- [ 0.505947] axp config [pmu_para] [pmu_usbvol] : 4000
- [ 0.510980] axp config [pmu_para] [pmu_usbcur_limit] : 0
- [ 0.516260] axp config [pmu_para] [pmu_usbcur] : 0
- [ 0.521034] axp config [pmu_para] [pmu_pwroff_vol] : 3300
- [ 0.526401] axp config [pmu_para] [pmu_pwron_vol] : 2900
- [ 0.531693] axp config [target] [dcdc2_vol] : 1400
- [ 0.536453] axp config [target] [dcdc3_vol] : 1250
- [ 0.541219] axp config [target] [ldo2_vol] : 3000
- [ 0.545907] axp config [target] [ldo3_vol] : 2800
- [ 0.550580] axp config [target] [ldo4_vol] : 2800
- [ 0.555260] axp config [pmu_para] [pmu_pekoff_time] : 6000
- [ 0.560726] axp config [pmu_para] [pmu_pekoff_en] : 1
- [ 0.565748] axp config [pmu_para] [pmu_peklong_time] : 1500
- [ 0.571303] axp config [pmu_para] [pmu_pwrok_time] : 64
- [ 0.576494] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
- [ 0.581960] axp config [pmu_para] [pmu_intotp_en] : 1
- [ 0.586981] axp config [pmu_para] [pmu_pekon_time] : 1000
- [ 0.592837] [gpio-inf] aw gpio init start
- [ 0.596358] [gpio-inf] gpio_clk_init: apb pio clk enable success
- [ 0.602575] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
- [ 0.608560] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
- [ 0.614770] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
- [ 0.620886] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
- [ 0.627199] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
- [ 0.633434] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
- [ 0.639797] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
- [ 0.646099] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
- [ 0.652577] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
- [ 0.658970] [gpio-inf] aw gpio init done
- [ 0.690316] bio: create slab <bio-0> at 0
- [ 0.693655] SCSI subsystem initialized
- [ 0.694720] usbcore: registered new interface driver usbfs
- [ 0.698259] usbcore: registered new interface driver hub
- [ 0.703480] usbcore: registered new device driver usb
- [ 0.709029] [i2c3] fetch para from sysconfig failed
- [ 0.713051] [i2c4] fetch para from sysconfig failed
- [ 0.719538] -------------------------------------------
- [ 0.723104] axp_mfd_probe:axp20_mfd pmu probed !
- [ 0.727694] -------------------------------------------
- [ 0.735328] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
- [ 0.738850] -------------------------------------------
- [ 0.743406] axp_mfd_probe:axp20_mfd pmu request_irq ok !
- [ 0.748668] -------------------------------------------
- [ 0.755652] I2C: i2c-0: sun7i I2C adapter
- [ 0.757855] **********start************
- [ 0.761669] 0x40
- [ 0.763575] 0xf8
- [ 0.765544] 0x58
- [ 0.767388] 0x0
- [ 0.769207] 0x0
- [ 0.771027] **********end************
- [ 0.775161] I2C: i2c-1: sun7i I2C adapter
- [ 0.778770] **********start************
- [ 0.782468] 0x40
- [ 0.784374] 0xf8
- [ 0.786281] 0x58
- [ 0.788187] 0x0
- [ 0.790059] 0x0
- [ 0.791827] **********end************
- [ 0.795858] I2C: i2c-2: sun7i I2C adapter
- [ 0.799455] **********start************
- [ 0.803446] 0x40
- [ 0.805175] 0xf8
- [ 0.807081] 0x28
- [ 0.808987] 0x0
- [ 0.810807] 0x0
- [ 0.812627] **********end************
- [ 0.816934] print_constraints: axp20_ldo1: 1300 mV
- [ 0.822822] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- [ 0.829456] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
- [ 0.836271] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
- [ 0.842751] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
- [ 0.849375] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
- [ 0.855522] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- [ 0.862092] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
- [ 0.869142] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.876074] Switching to clocksource arch_sys_counter
- [ 0.879388] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.886061] FS-Cache: Loaded
- [ 0.888880] CacheFiles: Loaded
- [ 0.910523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.911632] Line:1148:ohci_hcd_mod_init
- [ 0.915231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.922474] line = 483,usb_manager_init
- [ 0.925197] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
- [ 0.930464] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus gpio failed
- [ 0.940484] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc0(usb_restrict) failed
- [ 0.949772] [sw_hcd0]: usb host driver initialize........
- [ 0.954419] [sw_hcd0]: open_usb_clock
- [ 0.977838] [sw_hcd0]: host_init_state = 0
- [ 0.977866] [sw_hcd0]: platform is usb host
- [ 0.980543] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
- [ 0.990878] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- [ 0.996240] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- [ 1.005216] hub 1-0:1.0: USB hub found
- [ 1.007695] hub 1-0:1.0: 1 port detected
- [ 1.011643] wrn: hcd is not enable, need not start hcd
- [ 1.017132] [sw_hcd0]: sw_usb_host0_disable start
- [ 1.021388] -------sw_hcd0_soft_disconnect---------
- [ 1.026225] [sw_hcd_host0]: Set USB Power OFF
- [ 1.030555] wrn: hcd is not enable, need not stop hcd
- [ 1.035641] [sw_hcd0]: close_usb_clock
- [ 1.039311] [sw_hcd0]: sw_usb_host0_disable end
- [ 1.044008] [sw_udc]: udc_init: version 20080411
- [ 1.049301] NET: Registered protocol family 2
- [ 1.053082] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.060646] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 1.067689] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- [ 1.073881] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.079981] TCP reno registered
- [ 1.083105] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.088911] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.095575] NET: Registered protocol family 1
- [ 1.100081] RPC: Registered named UNIX socket transport module.
- [ 1.105396] RPC: Registered udp transport module.
- [ 1.110048] RPC: Registered tcp transport module.
- [ 1.114704] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.121450] sunxi_reg_init enter
- [ 1.124865] [cpu_freq] INF:set ahb apb clock async
- [ 1.129128] [cpu_freq] INF:sunxi_cpufreq_initcall: clocks pll=960000000,cpu=960000000,axi=320000000,ahp=150000000,apb=75000000
- [ 1.140606] [cpu_freq] INF:try to get regulator(0xdfad6840) successed.
- [ 1.147351] [cpu_freq] INF:-------------------V-F Table-------------------
- [ 1.153815] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
- [ 1.159878] [cpu_freq] INF: voltage = 1400mv frequency = 912MHz
- [ 1.165924] [cpu_freq] INF: voltage = 1300mv frequency = 864MHz
- [ 1.172003] [cpu_freq] INF: voltage = 1200mv frequency = 720MHz
- [ 1.178058] [cpu_freq] INF: voltage = 1100mv frequency = 528MHz
- [ 1.184135] [cpu_freq] INF: voltage = 1000mv frequency = 312MHz
- [ 1.190202] [cpu_freq] INF: voltage = 1000mv frequency = 144MHz
- [ 1.196258] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
- [ 1.202334] [cpu_freq] INF:-----------------------------------------------
- [ 1.209179] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz
- [ 1.219905] [cpu_freq] DBG:cur: pll=960000000, cpudiv=1, axidiv=3
- [ 1.226068] [pm]aw_pm_init!
- [ 1.228674] dram config [dram_para] [dram_baseaddr] : 1073741824
- [ 1.234675] dram config [dram_para] [dram_clk] : 384
- [ 1.239603] dram config [dram_para] [dram_type] : 3
- [ 1.244445] dram config [dram_para] [dram_rank_num] : 1
- [ 1.249655] dram config [dram_para] [dram_chip_density] : 2048
- [ 1.255452] dram config [dram_para] [dram_io_width] : 16
- [ 1.260748] dram config [dram_para] [dram_bus_width] : 32
- [ 1.266112] dram config [dram_para] [dram_cas] : 9
- [ 1.270888] dram config [dram_para] [dram_zq] : 127
- [ 1.275732] dram config [dram_para] [dram_odt_en] : 0
- [ 1.280768] dram config [dram_para] [dram_size] : 512
- [ 1.285785] dram config [dram_para] [dram_tpr0] : 1121491383
- [ 1.291430] dram config [dram_para] [dram_tpr1] : 41104
- [ 1.296618] dram config [dram_para] [dram_tpr2] : 141824
- [ 1.301915] dram config [dram_para] [dram_tpr3] : 0
- [ 1.306758] dram config [dram_para] [dram_tpr4] : 0
- [ 1.311622] dram config [dram_para] [dram_tpr5] : 0
- [ 1.316465] dram config [dram_para] [dram_emr1] : 4
- [ 1.321328] dram config [dram_para] [dram_emr2] : 16
- [ 1.326258] dram config [dram_para] [dram_emr3] : 0
- [ 1.331122] standby_mode = 1.
- [ 1.334145] cpu0_en = 0.
- [ 1.336657] dram_selfresh_en = 1.
- [ 1.339962] wakeup src cnt is : 0.
- [ 1.343502] DRAM_STANDBY_PGD_ADDR:d201c000
- [ 1.347512] [wifi]: select wifi: rtl8188eu !!
- [ 1.352251] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
- [ 1.356943] [rtl8188eu]: module power name
- [ 1.361154] [rtl8188eu]: rtl8188eu module power set by axp.
- [ 1.366652] [rtl8188eu]: get power regulator failed.
- [ 1.371623] [wifi_pm]: wifi gpio init is OK !!
- [ 1.380484] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.380774] fuse init (API version 7.18)
- [ 1.385344] msgmni has been set to 936
- [ 1.389116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.395317] io scheduler noop registered (default)
- [ 1.416015] loop: module loaded
- [ 1.416823] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
- [ 1.420739] [sw_hci_sun4i_init 1254]
- [ 1.422642] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrict_gpio) is invalid
- [ 1.431292] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrict_gpio) is invalid
- [ 1.440268] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrict_gpio) is invalid
- [ 1.448142] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrict_gpio) is invalid
- [ 1.457074] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc06c4668
- [ 1.464799] [sw-ehci1]: open clock
- [ 1.487565] [sw-ehci1]: open clock, 0x60(0x2c142), 0xcc(0x102)
- [ 1.487766] [sw-ehci1]: Set USB Power ON
- [ 1.491682] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.499152] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- [ 1.506330] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
- [ 1.511443] [ehci_run 736]
- [ 1.529379] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
- [ 1.530526] hub 2-0:1.0: USB hub found
- [ 1.532887] hub 2-0:1.0: 1 port detected
- [ 1.537492] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc06c477c
- [ 1.544605] [sw-ohci1]: open clock
- [ 1.567722] [sw-ohci1]: open clock, 0x60(0x2c146), 0xcc(0x162)
- [ 1.567920] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 2c146
- [ 1.573520] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.580612] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
- [ 1.587633] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
- [ 1.654303] hub 3-0:1.0: USB hub found
- [ 1.654353] hub 3-0:1.0: 1 port detected
- [ 1.657032] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc06c4890
- [ 1.664085] [sw-ehci2]: open clock
- [ 1.687274] [sw-ehci2]: open clock, 0x60(0x2c14e), 0xcc(0x166)
- [ 1.687472] [sw-ehci2]: Set USB Power ON
- [ 1.691386] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.698844] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 1.705981] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
- [ 1.711142] [ehci_run 736]
- [ 1.729441] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 1.730398] hub 4-0:1.0: USB hub found
- [ 1.732944] hub 4-0:1.0: 1 port detected
- [ 1.737289] [sw-ehci2]: sw_usb_disable_ehci
- [ 1.741022] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc06c4890
- [ 1.748791] sw-ehci sw-ehci.2: remove, state 1
- [ 1.753295] usb usb4: USB disconnect, device number 1
- [ 1.759821] Line:322:ehci_reset
- [ 1.761502] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 1.766394] [sw-ehci2]: Set USB Power OFF
- [ 1.770391] [sw-ehci2]: close clock
- [ 1.773858] WRN:L1293(drivers/usb/host/sw_hci_sun7i.c):ERR: usb2 sw-ohci2 is disable
- [ 1.781591] Initializing USB Mass Storage driver...
- [ 1.786733] usbcore: registered new interface driver usb-storage
- [ 1.792410] USB Mass Storage support registered.
- [ 1.797408] usbcore: registered new interface driver usbserial
- [ 1.802805] usbserial: USB Serial Driver core
- [ 1.807288] USB Serial support registered for GSM modem (1-port)
- [ 1.813402] usbcore: registered new interface driver option
- [ 1.818641] option: v0.7.2:USB Driver for GSM modems
- [ 1.824123] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
- [ 1.830208] [sw_udc]: alloc request: ep(0xc0668b78, ep0, 64), req(0xdfa3b6c0)
- [ 1.837276] WRN:L2583(drivers/usb/sun7i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.845249] [sw_udc]: sw_udc_pullup, is_on = 0
- [ 1.849678] WRN:L2618(drivers/usb/sun7i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.861067] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.864491] android_usb gadget: Number of LUNs=2
- [ 1.869085] lun0: LUN: removable file: (no medium)
- [ 1.873968] lun1: LUN: removable file: (no medium)
- [ 1.879496] WRN:L2583(drivers/usb/sun7i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.886779] android_usb gadget: android_usb ready
- [ 1.892355] mousedev: PS/2 mouse device common for all mice
- [ 1.897502] input: sun7i-ir as /devices/virtual/input/input0
- [ 1.903591] =====ctp_fetch_sysconfig_para=====.
- [ 1.940009] sunxi_rtc_init: enter
- [ 1.940361] rtc_hw_init(396): start
- [ 1.941261] rtc_hw_init(427): end
- [ 1.944529] sunxi_rtc_gettime, line 39
- [ 1.948180] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
- [ 1.953200] sunxi_rtc_gettime(61): year < 70, so add 100, to check
- [ 1.959275] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:42
- [ 1.964921] sunxi_rtc_getalarm(265): year < 70, so add 100, to check
- [ 1.971245] sunxi_rtc_getalarm(277): get alarm time 2000-1-1 0:0:0
- [ 1.977994] using rtc device, rtc, for alarms
- [ 1.981661] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
- [ 1.988011] i2c /dev entries driver
- [ 1.992672] lirc_dev: IR Remote Control driver registered, major 250
- [ 1.997667] IR NEC protocol handler initialized
- [ 2.002221] IR RC5(x) protocol handler initialized
- [ 2.006938] IR RC6 protocol handler initialized
- [ 2.011458] IR JVC protocol handler initialized
- [ 2.015951] IR Sony protocol handler initialized
- [ 2.020578] IR RC5 (streamzap) protocol handler initialized
- [ 2.026092] IR SANYO protocol handler initialized
- [ 2.030784] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.036578] IR LIRC bridge handler initialized
- [ 2.041466] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
- [ 2.061908] pmu_pekoff_time = 6000
- [ 2.061934] pmu_pekoff_en = 1
- [ 2.062623] pmu_peklong_time = 1500
- [ 2.066090] pmu_pekon_time = 1000
- [ 2.069400] pmu_pwrok_time = 64
- [ 2.072504] pmu_pwrnoe_time = 2000
- [ 2.075883] pmu_intotp_en = 1
- [ 2.079441] [AXP]POWER20_OFF_CTL:2044-->0x42
- [ 2.083675] POWER20_PEK_SET:2061-->0x9d
- [ 2.087486] POWER20_PEK_SET:2072-->0x9d
- [ 2.091382] POWER20_PEK_SET:2081-->0x9d
- [ 2.095112] POWER20_PEK_SET:2092-->0x9d
- [ 2.098924] POWER20_PEK_SET:2104-->0x9d
- [ 2.102751] POWER20_HOTOVER_CTL:2113-->0xad
- [ 2.111107] [AXP]last_rest_vol = 0, now_rest_vol = 100
- [ 2.112442] [AXP]charger->rest_vol = 100
- [ 2.120192] create_regulator: axp20_ldo2: Failed to create debugfs directory
- [ 2.123257] create_regulator: axp20_buck2: Failed to create debugfs directory
- [ 2.129813] create_regulator: axp20_buck3: Failed to create debugfs directory
- [ 2.136915] sunxi_wdt: sunxi watchdog timer driver v1.0
- [ 2.142581] sunxi_wdt: initialized (g_timeout=16s, g_nowayout=0)
- [ 2.147732] wdt_enable 0
- [ 2.150286] wdt_irq_en, enable 0
- [ 2.153450] wdt_clr_irq_pend
- [ 2.156316] wdt_set_tmout, timeout_in_sec 16, timeout_to_interv return interv 0x0000000b
- [ 2.164388] wdt_set_tmout, write 0x0000005a to modreg 0xf1c20c94, interv_to_timeout return timeout 16
- [ 2.173720] [cpu_freq] DBG:target frequency find is 912000000, entry 37
- [ 2.180375] [cpu_freq] DBG:cur: pll=960000000, cpudiv=1, axidiv=3
- [ 2.186213] [cpu_freq] DBG:new: pll=912000000, cpudiv=1, axidiv=3
- [ 2.192302] [cpu_freq] INF:cpu: 960Mhz->912Mhz
- [ 2.197198] [cpu_freq] DBG:sunxi_cpufreq_settarget: finished
- [ 2.202816] [mmc-msg] sw_mci_init
- [ 2.205665] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
- [ 2.213500] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.222533] [mmc-msg] sdc0 Probe: base:0xe082a000 irq:64 sg_cpu:ffdfb000(4fc00000) ret 0.
- [ 2.229694] sunxi_leds driver init
- [ 2.232845] sunxi leds can't find script data '[leds_para]' 'leds_used'
- [ 2.242329] usbcore: registered new interface driver usbhid
- [ 2.244971] usbhid: USB HID core driver
- [ 2.249118] value is 1
- [ 2.252009] Error: Driver 'switch-gpio' is already registered, aborting...
- [ 2.259207] value is 1
- [ 2.260766] enter sun7i Audio codec!!!
- [ 2.265679] sun7i audio support initialized
- [ 2.268430] sun7i Audio codec successfully loaded..
- [ 2.275939] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
- [ 2.279963] [SPDIF]sun7i-spdif cannot find any using configuration for controllers, return directly!
- [ 2.288751] [SPDIF]sun7i_sndspdif cannot find any using configuration for controllers, return directly!
- [ 2.297435] [I2S]sun7i-i2s cannot find any using configuration for controllers, return directly!
- [ 2.306877] [I2S]sun7i_sndi2s cannot find any using configuration for controllers, return directly!
- [ 2.314792] ALSA device list:
- [ 2.317688] #0: sun7i-CODEC Audio Codec
- [ 2.321887] #1: sndhdmi
- [ 2.324624] Netfilter messages via NETLINK v0.30.
- [ 2.329143] nf_conntrack version 0.5.0 (7488 buckets, 29952 max)
- [ 2.335577] ctnetlink v0.93: registering with nfnetlink.
- [ 2.340496] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 2.347238] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 2.354352] xt_time: kernel timezone is -0000
- [ 2.357434] IPv4 over IPv4 tunneling driver
- [ 2.363169] GRE over IPv4 demultiplexor driver
- [ 2.365786] GRE over IPv4 tunneling driver
- [ 2.371388] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.375535] TCP cubic registered
- [ 2.378524] Initializing XFRM netlink socket
- [ 2.383302] NET: Registered protocol family 10
- [ 2.388611] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.392860] IPv6 over IPv4 tunneling driver
- [ 2.399323] NET: Registered protocol family 17
- [ 2.401334] NET: Registered protocol family 15
- [ 2.405575] L2TP core driver, V2.0
- [ 2.408944] L2TP IP encapsulation support (L2TPv3)
- [ 2.413944] L2TP netlink interface
- [ 2.417127] L2TP ethernet pseudowire support (L2TPv3)
- [ 2.422149] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- [ 2.429761] ThumbEE CPU extension supported.
- [ 2.434031] turn off boot console earlycon0
- U-Boot SPL 2013.04-07297-g20bd663-dirty (Jun 16 2013 - 04:32:06)
- Board: A20-OLinuXino_MICRO
- DRAM: 512MB
- CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
- SUNXI SD/MMC: 0
- U-Boot 2013.04-07297-g20bd663-dirty (Jun 16 2013 - 04:32:06) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- Board: A20-OLinuXino_MICRO
- I2C: ready
- DRAM: 512 MiB
- MMC: SUNXI SD/MMC: 0
- In: serial
- Out: serial
- Err: serial
- Net: emac
- Hit any key to stop autoboot: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement