API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 6th, 2010
81
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.89 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
  2. [ 0.000000] Memory: 488424k/515520k available (4826k kernel code, 26136k reserved, 2211k data, 672k init, 0k highmem)
  3. [ 0.000000] virtual kernel memory layout:
  4. [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
  5. [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
  6. [ 0.000000] vmalloc : 0xdff70000 - 0xff9fe000 ( 506 MB)
  7. [ 0.000000] lowmem : 0xc0000000 - 0xdf770000 ( 503 MB)
  8. [ 0.000000] .init : 0xc07e0000 - 0xc0888000 ( 672 kB)
  9. [ 0.000000] .data : 0xc05b6a4b - 0xc07df7a8 (2211 kB)
  10. [ 0.000000] .text : 0xc0100000 - 0xc05b6a4b (4826 kB)
  11. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  12. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  13. [ 0.000000] Hierarchical RCU implementation.
  14. [ 0.000000] NR_IRQS:2304 nr_irqs:440
  15. [ 0.000000] Console: colour VGA+ 80x25
  16. [ 0.000000] console [tty0] enabled
  17. [ 0.000000] Fast TSC calibration using PIT
  18. [ 0.000000] Detected 2792.918 MHz processor.
  19. [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.83 BogoMIPS (lpj=11171672)
  20. [ 0.008027] Security Framework initialized
  21. [ 0.008052] AppArmor: AppArmor initialized
  22. [ 0.008063] Mount-cache hash table entries: 512
  23. [ 0.008238] Initializing cgroup subsys ns
  24. [ 0.008244] Initializing cgroup subsys cpuacct
  25. [ 0.008250] Initializing cgroup subsys memory
  26. [ 0.008260] Initializing cgroup subsys devices
  27. [ 0.008264] Initializing cgroup subsys freezer
  28. [ 0.008267] Initializing cgroup subsys net_cls
  29. [ 0.008295] CPU: Trace cache: 12K uops, L1 D cache: 8K
  30. [ 0.008300] CPU: L2 cache: 512K
  31. [ 0.008303] CPU: Hyper-Threading is disabled
  32. [ 0.008307] mce: CPU supports 4 MCE banks
  33. [ 0.008319] CPU0: Thermal monitoring enabled (TM1)
  34. [ 0.008331] Performance Events: no PMU driver, software events only.
  35. [ 0.008339] Checking 'hlt' instruction... OK.
  36. [ 0.024967] SMP alternatives: switching to UP code
  37. [ 0.041168] ACPI: Core revision 20090903
  38. [ 0.077468] ftrace: converting mcount calls to 0f 1f 44 00 00
  39. [ 0.077475] ftrace: allocating 22402 entries in 44 pages
  40. [ 0.080092] Enabling APIC mode: Flat. Using 1 I/O APICs
  41. [ 0.080390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  42. [ 0.121443] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
  43. [ 0.124001] Brought up 1 CPUs
  44. [ 0.124001] Total of 1 processors activated (5585.83 BogoMIPS).
  45. [ 0.124001] CPU0 attaching NULL sched-domain.
  46. [ 0.124001] devtmpfs: initialized
  47. [ 0.124001] regulator: core version 0.5
  48. [ 0.124001] Time: 20:53:37 Date: 05/05/10
  49. [ 0.124001] NET: Registered protocol family 16
  50. [ 0.124001] EISA bus registered
  51. [ 0.124001] ACPI: bus type pci registered
  52. [ 0.124001] PCI: PCI BIOS revision 2.10 entry at 0xfbb42, last bus=1
  53. [ 0.124001] PCI: Using configuration type 1 for base access
  54. [ 0.124001] bio: create slab <bio-0> at 0
  55. [ 0.124001] ACPI: EC: Look up EC in DSDT
  56. [ 0.151183] ACPI: Interpreter enabled
  57. [ 0.151197] ACPI: (supports S0 S1 S3 S4 S5)
  58. [ 0.151226] ACPI: Using IOAPIC for interrupt routing
  59. [ 0.177839] ACPI: No dock devices found.
  60. [ 0.179282] ACPI: PCI Root Bridge [PCI0] (0000:00)
  61. [ 0.179328] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
  62. [ 0.179339] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
  63. [ 0.179415] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
  64. [ 0.179423] pci 0000:00:02.0: reg 14 32bit mmio: [0xfeb80000-0xfebfffff]
  65. [ 0.179430] pci 0000:00:02.0: reg 18 io port: [0xed98-0xed9f]
  66. [ 0.179487] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
  67. [ 0.179586] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
  68. [ 0.179643] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
  69. [ 0.179699] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
  70. [ 0.179756] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
  71. [ 0.179819] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
  72. [ 0.179879] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  73. [ 0.179885] pci 0000:00:1d.7: PME# disabled
  74. [ 0.179976] pci 0000:00:1f.0: HPET at 0xfed00000
  75. [ 0.179983] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
  76. [ 0.179987] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
  77. [ 0.180025] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
  78. [ 0.180033] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
  79. [ 0.180041] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
  80. [ 0.180048] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
  81. [ 0.180055] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
  82. [ 0.180063] pci 0000:00:1f.1: reg 24 32bit mmio: [0xfeb7fc00-0xfeb7ffff]
  83. [ 0.180096] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
  84. [ 0.180103] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
  85. [ 0.180110] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
  86. [ 0.180117] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
  87. [ 0.180123] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
  88. [ 0.180178] pci 0000:00:1f.3: reg 20 io port: [0xeda0-0xedbf]
  89. [ 0.180229] pci 0000:00:1f.5: reg 10 io port: [0xee00-0xeeff]
  90. [ 0.180236] pci 0000:00:1f.5: reg 14 io port: [0xedc0-0xedff]
  91. [ 0.180243] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfeb7fa00-0xfeb7fbff]
  92. [ 0.180250] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfeb7f900-0xfeb7f9ff]
  93. [ 0.180281] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  94. [ 0.180286] pci 0000:00:1f.5: PME# disabled
  95. [ 0.180329] pci 0000:01:01.0: reg 10 32bit mmio: [0xfe9fe000-0xfe9fffff]
  96. [ 0.180357] pci 0000:01:01.0: reg 30 32bit mmio pref: [0xfea00000-0xfea03fff]
  97. [ 0.180376] pci 0000:01:01.0: supports D1 D2
  98. [ 0.180378] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
  99. [ 0.180383] pci 0000:01:01.0: PME# disabled
  100. [ 0.180425] pci 0000:00:1e.0: transparent bridge
  101. [ 0.180432] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
  102. [ 0.180445] pci_bus 0000:00: on NUMA node 0
  103. [ 0.180450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  104. [ 0.180765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
  105. [ 0.302497] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
  106. [ 0.302824] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 15)
  107. [ 0.303149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
  108. [ 0.303474] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
  109. [ 0.303795] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  110. [ 0.304233] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  111. [ 0.304554] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  112. [ 0.304880] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
  113. [ 0.305054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  114. [ 0.305064] vgaarb: loaded
  115. [ 0.305215] SCSI subsystem initialized
  116. [ 0.305301] libata version 3.00 loaded.
  117. [ 0.305390] usbcore: registered new interface driver usbfs
  118. [ 0.305405] usbcore: registered new interface driver hub
  119. [ 0.305436] usbcore: registered new device driver usb
  120. [ 0.305592] ACPI: WMI: Mapper loaded
  121. [ 0.305595] PCI: Using ACPI for IRQ routing
  122. [ 0.305757] NetLabel: Initializing
  123. [ 0.305760] NetLabel: domain hash size = 128
  124. [ 0.305762] NetLabel: protocols = UNLABELED CIPSOv4
  125. [ 0.305776] NetLabel: unlabeled traffic allowed by default
  126. [ 0.305908] hpet clockevent registered
  127. [ 0.305912] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  128. [ 0.305918] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  129. [ 0.305924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  130. [ 0.308019] Switching to clocksource tsc
  131. [ 0.310271] AppArmor: AppArmor Filesystem Enabled
  132. [ 0.310294] pnp: PnP ACPI init
  133. [ 0.310316] ACPI: bus type pnp registered
  134. [ 0.329559] pnp 00:09: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
  135. [ 0.329564] pnp 00:09: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
  136. [ 0.330275] pnp: PnP ACPI: found 10 devices
  137. [ 0.330278] ACPI: ACPI bus type pnp unregistered
  138. [ 0.330284] PnPBIOS: Disabled by ACPI PNP
  139. [ 0.330299] system 00:00: iomem range 0x0-0x9ffff could not be reserved
  140. [ 0.330304] system 00:00: iomem range 0x100000-0xffffff could not be reserved
  141. [ 0.330308] system 00:00: iomem range 0x1000000-0x1f76ffff could not be reserved
  142. [ 0.330312] system 00:00: iomem range 0xc0000-0xfffff could not be reserved
  143. [ 0.330316] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
  144. [ 0.330319] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
  145. [ 0.330323] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
  146. [ 0.330327] system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved
  147. [ 0.330330] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
  148. [ 0.330334] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
  149. [ 0.330345] system 00:09: ioport range 0xc00-0xc7f has been reserved
  150. [ 0.365083] pci 0000:01:01.0: BAR 6: address space collision on of device [0xfea00000-0xfea03fff]
  151. [ 0.365101] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
  152. [ 0.365104] pci 0000:00:1e.0: IO window: disabled
  153. [ 0.365110] pci 0000:00:1e.0: MEM window: 0xfe900000-0xfeafffff
  154. [ 0.365116] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x200fffff
  155. [ 0.365131] pci 0000:00:1e.0: setting latency timer to 64
  156. [ 0.365137] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  157. [ 0.365140] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  158. [ 0.365144] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
  159. [ 0.365147] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff]
  160. [ 0.365150] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
  161. [ 0.365153] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
  162. [ 0.365200] NET: Registered protocol family 2
  163. [ 0.365319] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  164. [ 0.365669] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  165. [ 0.365740] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  166. [ 0.365811] TCP: Hash tables configured (established 16384 bind 16384)
  167. [ 0.365813] TCP reno registered
  168. [ 0.365908] NET: Registered protocol family 1
  169. [ 0.365932] pci 0000:00:02.0: Boot video device
  170. [ 0.366114] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
  171. [ 0.366118] Simple Boot Flag at 0x7a set to 0x1
  172. [ 0.366217] cpufreq-nforce2: No nForce2 chipset.
  173. [ 0.366251] Scanning for low memory corruption every 60 seconds
  174. [ 0.366390] audit: initializing netlink socket (disabled)
  175. [ 0.366405] type=2000 audit(1273092817.363:1): initialized
  176. [ 0.374559] Trying to unpack rootfs image as initramfs...
  177. [ 0.384168] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  178. [ 0.392178] VFS: Disk quotas dquot_6.5.2
  179. [ 0.392295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  180. [ 0.393026] fuse init (API version 7.13)
  181. [ 0.393133] msgmni has been set to 955
  182. [ 0.393386] alg: No test for stdrng (krng)
  183. [ 0.393458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  184. [ 0.393463] io scheduler noop registered
  185. [ 0.393465] io scheduler anticipatory registered
  186. [ 0.393467] io scheduler deadline registered
  187. [ 0.393515] io scheduler cfq registered (default)
  188. [ 0.393649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  189. [ 0.393679] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  190. [ 0.393786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  191. [ 0.393796] ACPI: Power Button [VBTN]
  192. [ 0.393856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  193. [ 0.393860] ACPI: Power Button [PWRF]
  194. [ 0.394096] processor LNXCPU:00: registered as cooling_device0
  195. [ 0.436149] isapnp: Scanning for PnP cards...
  196. [ 0.441950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  197. [ 0.443482] brd: module loaded
  198. [ 0.444069] loop: module loaded
  199. [ 0.444207] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  200. [ 0.444369] ata_piix 0000:00:1f.1: version 2.13
  201. [ 0.444387] alloc irq_desc for 18 on node -1
  202. [ 0.444390] alloc kstat_irqs on node -1
  203. [ 0.444399] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  204. [ 0.444452] ata_piix 0000:00:1f.1: setting latency timer to 64
  205. [ 0.444571] scsi0 : ata_piix
  206. [ 0.448230] scsi1 : ata_piix
  207. [ 0.448305] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  208. [ 0.448309] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  209. [ 0.448342] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  210. [ 0.448348] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
  211. [ 0.448403] ata_piix 0000:00:1f.2: setting latency timer to 64
  212. [ 0.492070] scsi2 : ata_piix
  213. [ 0.492290] scsi3 : ata_piix
  214. [ 0.492337] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
  215. [ 0.492340] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
  216. [ 0.492766] Fixed MDIO Bus: probed
  217. [ 0.492815] PPP generic driver version 2.4.2
  218. [ 0.492904] tun: Universal TUN/TAP device driver, 1.6
  219. [ 0.492907] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  220. [ 0.493030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  221. [ 0.493058] alloc irq_desc for 23 on node -1
  222. [ 0.493061] alloc kstat_irqs on node -1
  223. [ 0.493069] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  224. [ 0.493090] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  225. [ 0.493094] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  226. [ 0.493139] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  227. [ 0.493178] ehci_hcd 0000:00:1d.7: debug port 1
  228. [ 0.497056] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
  229. [ 0.500398] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
  230. [ 0.520300] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  231. [ 0.520486] usb usb1: configuration #1 chosen from 1 choice
  232. [ 0.520524] hub 1-0:1.0: USB hub found
  233. [ 0.520536] hub 1-0:1.0: 8 ports detected
  234. [ 0.520618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  235. [ 0.520640] uhci_hcd: USB Universal Host Controller Interface driver
  236. [ 0.520700] alloc irq_desc for 16 on node -1
  237. [ 0.520703] alloc kstat_irqs on node -1
  238. [ 0.520712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  239. [ 0.520724] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  240. [ 0.520728] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  241. [ 0.520781] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  242. [ 0.520818] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
  243. [ 0.520926] usb usb2: configuration #1 chosen from 1 choice
  244. [ 0.520959] hub 2-0:1.0: USB hub found
  245. [ 0.520968] hub 2-0:1.0: 2 ports detected
  246. [ 0.521020] alloc irq_desc for 19 on node -1
  247. [ 0.521022] alloc kstat_irqs on node -1
  248. [ 0.521028] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  249. [ 0.521037] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  250. [ 0.521041] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  251. [ 0.521082] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  252. [ 0.521111] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
  253. [ 0.521212] usb usb3: configuration #1 chosen from 1 choice
  254. [ 0.521243] hub 3-0:1.0: USB hub found
  255. [ 0.521252] hub 3-0:1.0: 2 ports detected
  256. [ 0.521304] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  257. [ 0.521313] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  258. [ 0.521317] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  259. [ 0.521362] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  260. [ 0.521385] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
  261. [ 0.521493] usb usb4: configuration #1 chosen from 1 choice
  262. [ 0.521525] hub 4-0:1.0: USB hub found
  263. [ 0.521535] hub 4-0:1.0: 2 ports detected
  264. [ 0.521586] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  265. [ 0.521594] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  266. [ 0.521599] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  267. [ 0.521639] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  268. [ 0.521662] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
  269. [ 0.521761] usb usb5: configuration #1 chosen from 1 choice
  270. [ 0.521794] hub 5-0:1.0: USB hub found
  271. [ 0.521804] hub 5-0:1.0: 2 ports detected
  272. [ 0.521911] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  273. [ 0.529124] serio: i8042 KBD port at 0x60,0x64 irq 1
  274. [ 0.529139] serio: i8042 AUX port at 0x60,0x64 irq 12
  275. [ 0.529346] mice: PS/2 mouse device common for all mice
  276. [ 0.529507] rtc_cmos 00:05: RTC can wake from S4
  277. [ 0.529561] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  278. [ 0.529586] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
  279. [ 0.529730] device-mapper: uevent: version 1.0.3
  280. [ 0.529877] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  281. [ 0.532063] device-mapper: multipath: version 1.1.0 loaded
  282. [ 0.532069] device-mapper: multipath round-robin: version 1.0.0 loaded
  283. [ 0.532275] EISA: Probing bus 0 at eisa.0
  284. [ 0.532315] EISA: Detected 0 cards.
  285. [ 0.534584] cpuidle: using governor ladder
  286. [ 0.534588] cpuidle: using governor menu
  287. [ 0.535197] TCP cubic registered
  288. [ 0.535349] NET: Registered protocol family 10
  289. [ 0.535929] lo: Disabled Privacy Extensions
  290. [ 0.536356] NET: Registered protocol family 17
  291. [ 0.536427] Using IPI No-Shortcut mode
  292. [ 0.536558] PM: Resume from disk failed.
  293. [ 0.536573] registered taskstats version 1
  294. [ 0.536810] Magic number: 10:828:901
  295. [ 0.536897] rtc_cmos 00:05: setting system clock to 2010-05-05 20:53:38 UTC (1273092818)
  296. [ 0.536901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  297. [ 0.536903] EDD information not available.
  298. [ 0.548969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  299. [ 0.771715] ata1.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100
  300. [ 0.771720] ata1.00: 976773168 sectors, multi 8: LBA48
  301. [ 0.813615] ata1.00: configured for UDMA/100
  302. [ 0.864015] usb 1-3: new high speed USB device using ehci_hcd and address 2
  303. [ 0.864429] ata2.00: ATAPI: SAMSUNG CD-ROM SN-124, N102, max UDMA/33
  304. [ 0.880470] ata2.00: configured for UDMA/33
  305. [ 1.055020] usb 1-3: configuration #1 chosen from 1 choice
  306. [ 1.060362] Freeing initrd memory: 10472k freed
  307. [ 1.114781] isapnp: No Plug & Play device found
  308. [ 1.115151] scsi 0:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5
  309. [ 1.115378] sd 0:0:0:0: Attached scsi generic sg0 type 0
  310. [ 1.115593] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  311. [ 1.115651] sd 0:0:0:0: [sda] Write Protect is off
  312. [ 1.115654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  313. [ 1.115684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  314. [ 1.115858] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SN-124 N102 PQ: 0 ANSI: 5
  315. [ 1.116165] sda:sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
  316. [ 1.121040] Uniform CD-ROM driver Revision: 3.20
  317. [ 1.121166] sr 1:0:0:0: Attached scsi CD-ROM sr0
  318. [ 1.121239] sr 1:0:0:0: Attached scsi generic sg1 type 5
  319. [ 1.135065] sda1 sda2
  320. [ 1.135346] sd 0:0:0:0: [sda] Attached SCSI disk
  321. [ 1.280023] usb 1-6: new high speed USB device using ehci_hcd and address 4
  322. [ 1.598271] usb 1-6: configuration #1 chosen from 1 choice
  323. [ 1.836012] usb 4-1: new full speed USB device using uhci_hcd and address 2
  324. [ 1.986288] usb 4-1: configuration #1 chosen from 1 choice
  325. [ 1.989249] hub 4-1:1.0: USB hub found
  326. [ 1.991222] hub 4-1:1.0: 4 ports detected
  327. [ 2.332129] Freeing unused kernel memory: 672k freed
  328. [ 2.332811] Write protecting the kernel text: 4828k
  329. [ 2.332879] Write protecting the kernel read-only data: 1876k
  330. [ 2.361900] udev: starting version 151
  331. [ 2.589860] Linux agpgart interface v0.103
  332. [ 2.635846] [drm] Initialized drm 1.1.0 20060810
  333. [ 2.640375] agpgart-intel 0000:00:00.0: Intel 865 Chipset
  334. [ 2.640534] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
  335. [ 2.643251] b44 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  336. [ 2.649618] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
  337. [ 2.676528] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  338. [ 2.676537] i915 0000:00:02.0: setting latency timer to 64
  339. [ 2.681848] [drm] set up 7M of stolen space
  340. [ 2.708957] ssb: Sonics Silicon Backplane found on PCI device 0000:01:01.0
  341. [ 2.708986] b44.c:v2.0
  342. [ 2.710475] [drm] initialized overlay support
  343. [ 2.728802] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:7e:88:28
  344. [ 2.869973] fb0: inteldrmfb frame buffer device
  345. [ 2.869978] registered panic notifier
  346. [ 2.869989] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  347. [ 2.873248] vga16fb: initializing
  348. [ 2.873254] vga16fb: mapped to 0xc00a0000
  349. [ 2.873260] vga16fb: not registering due to another framebuffer present
  350. [ 2.983047] Console: switching to colour frame buffer device 128x48
  351. [ 3.173637] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  352. [ 3.173644] EXT4-fs (sda1): write access will be enabled during recovery
  353. [ 6.781387] EXT4-fs (sda1): recovery complete
  354. [ 6.781746] EXT4-fs (sda1): mounted filesystem with ordered data mode
  355. [ 14.164492] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k
  356. [ 14.393001] udev: starting version 151
  357. [ 14.741013] intel_rng: Firmware space is locked read-only. If you can't or
  358. [ 14.741015] intel_rng: don't want to disable this in firmware setup, and if
  359. [ 14.741017] intel_rng: you are certain that your system has a functional
  360. [ 14.741019] intel_rng: RNG, try using the 'no_fwh_detect' option.
  361. [ 14.763680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  362. [ 14.920720] cfg80211: Calling CRDA to update world regulatory domain
  363. [ 14.946035] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
  364. [ 14.947231] parport_pc 00:08: reported by Plug and Play ACPI
  365. [ 14.947284] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
  366. [ 14.980106] udev: renamed network interface eth0 to eth1
  367. [ 15.010501] dell-wmi: No known WMI GUID found
  368. [ 15.011088] usbcore: registered new interface driver cdc_ether
  369. [ 15.022134] lp: driver loaded but no devices found
  370. [ 15.023575] ppdev: user-space parallel port driver
  371. [ 15.048261] lp0: using parport0 (interrupt-driven).
  372. [ 15.196372] usbcore: registered new interface driver rndis_host
  373. [ 15.214513] cfg80211: World regulatory domain updated:
  374. [ 15.214518] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  375. [ 15.214523] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  376. [ 15.214526] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  377. [ 15.214529] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  378. [ 15.214533] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  379. [ 15.214536] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  380. [ 15.222640] psmouse serio1: ID: 10 00 64
  381. [ 15.382885] type=1505 audit(1273110833.343:2): operation="profile_load" pid=512 name="/sbin/dhclient3"
  382. [ 15.383438] type=1505 audit(1273110833.343:3): operation="profile_load" pid=512 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  383. [ 15.383737] type=1505 audit(1273110833.343:4): operation="profile_load" pid=512 name="/usr/lib/connman/scripts/dhclient-script"
  384. [ 15.733945] wlan0: register 'rndis_wlan' at usb-0000:00:1d.7-3, Wireless RNDIS device, BCM4320a based, 00:0f:66:78:4f:5b
  385. [ 15.733990] usbcore: registered new interface driver rndis_wlan
  386. [ 15.741858] type=1505 audit(1273110833.703:5): operation="profile_load" pid=566 name="/usr/sbin/ntpd"
  387. [ 15.819994] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
  388. [ 15.965307] alloc irq_desc for 17 on node -1
  389. [ 15.965311] alloc kstat_irqs on node -1
  390. [ 15.965322] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  391. [ 15.965366] Intel ICH 0000:00:1f.5: setting latency timer to 64
  392. [ 16.003543] udev: renamed network interface wlan0 to wlan2
  393. [ 16.142386] phy1: Selected rate control algorithm 'minstrel'
  394. [ 16.143469] Registered led device: rt73usb-phy1::radio
  395. [ 16.143492] Registered led device: rt73usb-phy1::assoc
  396. [ 16.143512] Registered led device: rt73usb-phy1::quality
  397. [ 16.144084] usbcore: registered new interface driver rt73usb
  398. [ 16.392024] intel8x0_measure_ac97_clock: measured 54227 usecs (2613 samples)
  399. [ 16.392029] intel8x0: clocking to 48000
  400. [ 17.454876] type=1505 audit(1273110835.415:6): operation="profile_load" pid=687 name="/usr/sbin/avahi-daemon"
  401. [ 19.019872] type=1505 audit(1273110836.979:7): operation="profile_load" pid=806 name="/bin/ping"
  402. [ 19.022809] type=1505 audit(1273110836.983:8): operation="profile_replace" pid=809 name="/sbin/dhclient3"
  403. [ 19.023369] type=1505 audit(1273110836.983:9): operation="profile_replace" pid=809 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  404. [ 19.023685] type=1505 audit(1273110836.983:10): operation="profile_replace" pid=809 name="/usr/lib/connman/scripts/dhclient-script"
  405. [ 19.052066] type=1505 audit(1273110837.015:11): operation="profile_load" pid=810 name="/sbin/klogd"
  406. [ 20.460234] __ratelimit: 48 callbacks suppressed
  407. [ 20.460238] type=1505 audit(1273110838.423:28): operation="profile_load" pid=842 name="/usr/lib/cups/backend/cups-pdf"
  408. [ 20.460898] type=1505 audit(1273110838.423:29): operation="profile_load" pid=842 name="/usr/sbin/cupsd"
  409. [ 20.515748] type=1505 audit(1273110838.478:30): operation="profile_load" pid=844 name="/usr/sbin/dhcpd3"
  410. [ 20.672542] type=1505 audit(1273110838.635:31): operation="profile_load" pid=848 name="/usr/sbin/dnsmasq"
  411. [ 20.695573] type=1505 audit(1273110838.655:32): operation="profile_load" pid=849 name="/usr/sbin/dovecot"
  412. [ 20.869966] type=1505 audit(1273110838.832:33): operation="profile_load" pid=852 name="/usr/sbin/identd"
  413. [ 20.961540] type=1505 audit(1273110838.924:34): operation="profile_load" pid=853 name="/usr/sbin/libvirtd"
  414. [ 21.061031] type=1505 audit(1273110839.023:35): operation="profile_load" pid=854 name="/usr/sbin/mdnsd"
  415. [ 21.099779] type=1505 audit(1273110839.059:36): operation="profile_load" pid=856 name="/usr/sbin/mysqld"
  416. [ 21.149337] type=1505 audit(1273110839.111:37): operation="profile_load" pid=857 name="/usr/sbin/mysqld-akonadi"
  417. [ 22.881474] Bridge firewalling registered
  418. [ 22.926465] virbr0: starting userspace STP failed, starting kernel STP
  419. [ 23.089929] ip_tables: (C) 2000-2006 Netfilter Core Team
  420. [ 23.648922] nf_conntrack version 0.5.0 (7814 buckets, 31256 max)
  421. [ 23.656075] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  422. [ 23.656081] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  423. [ 23.656084] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  424. [ 26.507245] lo: Disabled Privacy Extensions
  425. [ 31.237883] ADDRCONF(NETDEV_UP): eth1: link is not ready
  426. [ 33.344008] virbr0: no IPv6 routers present
  427. [ 34.816186] b44: eth1: Link is up at 100 Mbps, full duplex.
  428. [ 34.816191] b44: eth1: Flow control is off for TX and off for RX.
  429. [ 34.816287] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  430. [ 45.400022] eth1: no IPv6 routers present
  431. [ 48.705894] __ratelimit: 24 callbacks suppressed
  432. [ 48.705898] type=1502 audit(1273110866.667:46): operation="chmod" pid=1737 parent=1 profile="/usr/sbin/nmbd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/var/log/samba/cores/"
  433. [ 561.544606] padlock: VIA PadLock not detected.
  434. [63811.058100] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  435. [63811.058105] All bugs added by David S. Miller <davem@redhat.com>
  436. [63820.603869] b44: eth1: powering down PHY
  437. [63834.851925] ADDRCONF(NETDEV_UP): eth1: link is not ready
  438. [63838.000168] b44: eth1: Link is up at 100 Mbps, full duplex.
  439. [63838.000173] b44: eth1: Flow control is off for TX and off for RX.
  440. [63838.000274] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  441. [63848.336030] eth1: no IPv6 routers present
  442. [68347.796022] usb 1-8: new high speed USB device using ehci_hcd and address 5
  443. [68347.929164] usb 1-8: configuration #1 chosen from 1 choice
  444. [68348.580026] usb 1-8: reset high speed USB device using ehci_hcd and address 5
  445. [68348.713076] phy2: Selected rate control algorithm 'minstrel'
  446. [68348.714190] zd1211rw 1-8:1.0: phy2
  447. [68348.714218] usbcore: registered new interface driver zd1211rw
  448. [68349.184863] udev: renamed network interface wlan1 to wlan3
  449. diabolical@diabolical-fs:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!