Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
- BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
- BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
- BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
- DMI 2.4 present.
- AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-DFFFF uncachable
- E0000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask F80000000 write-back
- 1 disabled
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- Scanning 0 areas for low memory corruption
- modified physical RAM map:
- modified: 0000000000000000 - 0000000000010000 (reserved)
- modified: 0000000000010000 - 000000000009fc00 (usable)
- modified: 000000000009fc00 - 00000000000a0000 (reserved)
- modified: 00000000000e4000 - 0000000000100000 (reserved)
- modified: 0000000000100000 - 000000007ffa0000 (usable)
- modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
- modified: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
- modified: 000000007ffe0000 - 0000000080000000 (reserved)
- modified: 00000000fee00000 - 00000000fee01000 (reserved)
- modified: 00000000fff80000 - 0000000100000000 (reserved)
- initial memory mapped : 0 - 01800000
- found SMP MP-table at [c00ff780] ff780
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 15000-1a000
- RAMDISK: 7fdf4000 - 7ff90000
- Allocated new RAMDISK: 00100000 - 0029b9a7
- Move RAMDISK from 000000007fdf4000 - 000000007ff8f9a6 to 00100000 - 0029b9a6
- ACPI: RSDP 000fb030 00014 (v00 ACPIAM)
- ACPI: RSDT 7ffa0000 00038 (v01 A_M_I_ OEMRSDT 12000724 MSFT 00000097)
- ACPI: FACP 7ffa0200 00084 (v02 A_M_I_ OEMFACP 12000724 MSFT 00000097)
- ACPI: DSDT 7ffa05c0 06909 (v01 A0798 A0798000 00000000 INTL 20051117)
- ACPI: FACS 7ffae000 00040
- ACPI: APIC 7ffa0390 0006C (v01 A_M_I_ OEMAPIC 12000724 MSFT 00000097)
- ACPI: MCFG 7ffa0400 0003C (v01 A_M_I_ OEMMCFG 12000724 MSFT 00000097)
- ACPI: OEMB 7ffae040 00080 (v01 A_M_I_ AMI_OEM 12000724 MSFT 00000097)
- ACPI: HPET 7ffa6ed0 00038 (v01 A_M_I_ OEMHPET 12000724 MSFT 00000097)
- ACPI: Local APIC address 0xfee00000
- 1159MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0007ffa0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0007ffa0
- On node 0 totalpages: 524079
- free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 2320 pages used for memmap
- HighMem zone: 294546 pages, LIFO batch:31
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- SMP: Allowing 4 CPUs, 2 hotplug CPUs
- nr_irqs_gsi: 40
- early_res array is doubled to 64 at [16000 - 167ff]
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- PERCPU: Embedded 13 pages/cpu @c2800000 s31488 r0 d21760 u1048576
- pcpu-alloc: s31488 r0 d21760 u1048576 alloc=1*4194304
- pcpu-alloc: [0] 0 1 2 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519983
- Kernel command line: root=/dev/disk/by-uuid/eadd768f-4863-43fc-adda-dce5c2323df4 ro
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- allocated 10483520 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Subtract (50 early reservations)
- #1 [0000001000 - 0000002000] EX TRAMPOLINE
- #2 [0001000000 - 000158fe8c] TEXT DATA BSS
- #3 [0001590000 - 0001596218] BRK
- #4 [00000ff790 - 0000100000] BIOS reserved
- #5 [00000ff780 - 00000ff790] MP-table mpf
- #6 [000009fc00 - 00000f1740] BIOS reserved
- #7 [00000f1880 - 00000ff780] BIOS reserved
- #8 [00000f1740 - 00000f1880] MP-table mpc
- #9 [0000010000 - 0000011000] TRAMPOLINE
- #10 [0000011000 - 0000015000] ACPI WAKEUP
- #11 [0000015000 - 0000016000] PGTABLE
- #12 [0000100000 - 000029c000] NEW RAMDISK
- #13 [0001597000 - 0001598000] BOOTMEM
- #14 [0001598000 - 0002598000] BOOTMEM
- #15 [000158fec0 - 000158fec4] BOOTMEM
- #16 [000158ff00 - 000158ffc0] BOOTMEM
- #17 [0001596240 - 0001596294] BOOTMEM
- #18 [0002598000 - 000259b000] BOOTMEM
- #19 [00015962c0 - 0001596330] BOOTMEM
- #20 [000259b000 - 00025a1000] BOOTMEM
- #21 [000158ffc0 - 000158ffe5] BOOTMEM
- #22 [0001596340 - 0001596367] BOOTMEM
- #23 [0001596380 - 0001596498] BOOTMEM
- #24 [00015964c0 - 0001596500] BOOTMEM
- #25 [0001596500 - 0001596540] BOOTMEM
- #26 [0001596540 - 0001596580] BOOTMEM
- #27 [0001596580 - 00015965c0] BOOTMEM
- #28 [00015965c0 - 0001596600] BOOTMEM
- #29 [0001596600 - 0001596640] BOOTMEM
- #30 [0001596640 - 0001596680] BOOTMEM
- #31 [0001596680 - 00015966c0] BOOTMEM
- #32 [00015966c0 - 0001596700] BOOTMEM
- #33 [0001596700 - 0001596710] BOOTMEM
- #34 [0001596740 - 000159677f] BOOTMEM
- #35 [0001596780 - 00015967bf] BOOTMEM
- #36 [0002800000 - 000280d000] BOOTMEM
- #37 [0002900000 - 000290d000] BOOTMEM
- #38 [0002a00000 - 0002a0d000] BOOTMEM
- #39 [0002b00000 - 0002b0d000] BOOTMEM
- #40 [00015967c0 - 00015967c4] BOOTMEM
- #41 [0001596800 - 0001596804] BOOTMEM
- #42 [0001596840 - 0001596850] BOOTMEM
- #43 [0001596880 - 0001596890] BOOTMEM
- #44 [00015968c0 - 0001596960] BOOTMEM
- #45 [0001596980 - 00015969c8] BOOTMEM
- #46 [00025a1000 - 00025a5000] BOOTMEM
- #47 [00025a5000 - 0002625000] BOOTMEM
- #48 [0002625000 - 0002665000] BOOTMEM
- #49 [0002b0d000 - 000350c740] BOOTMEM
- Initializing HighMem for node 0 (000377fe:0007ffa0)
- Memory: 2061264k/2096768k available (3104k kernel code, 35052k reserved, 1205k data, 428k init, 1187464k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc1436000 - 0xc14a1000 ( 428 kB)
- .data : 0xc1308226 - 0xc1435820 (1205 kB)
- .text : 0xc1000000 - 0xc1308226 (3104 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:512
- Console: colour VGA+ 80x25
- console [tty0] enabled
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 3199.510 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.64 BogoMIPS (lpj=10665033)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- TOMOYO Linux initialized
- AppArmor: AppArmor disabled by boot time parameter
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- ... version: 0
- ... bit width: 40
- ... generic registers: 18
- ... value mask: 000000ffffffffff
- ... max period: 0000007fffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000003ffff
- ACPI: Core revision 20100702
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
- NMI watchdog enabled, takes one hw-pmu counter.
- Booting Node 0, Processors #1
- Initializing CPU#1
- NMI watchdog enabled, takes one hw-pmu counter.
- Brought up 2 CPUs
- Total of 2 processors activated (12804.16 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
- PCI: not using MMCONFIG
- PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
- PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
- PCI: Using MMCONFIG for extended config space
- ACPI: No dock devices found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x80010000-0xffffffff] (ignored)
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:01.0: PME# disabled
- pci 0000:00:1b.0: reg 10: [mem 0xdbef8000-0xdbefbfff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PME# disabled
- pci 0000:00:1d.0: reg 20: [io 0x8000-0x801f]
- pci 0000:00:1d.1: reg 20: [io 0x8400-0x841f]
- pci 0000:00:1d.2: reg 20: [io 0x8800-0x881f]
- pci 0000:00:1d.3: reg 20: [io 0x9000-0x901f]
- pci 0000:00:1d.7: reg 10: [mem 0xdbeffc00-0xdbefffff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
- pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
- pci 0000:00:1f.2: reg 10: [io 0xa800-0xa807]
- pci 0000:00:1f.2: reg 14: [io 0xa400-0xa403]
- pci 0000:00:1f.2: reg 18: [io 0xa000-0xa007]
- pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
- pci 0000:00:1f.2: reg 20: [io 0x9400-0x940f]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- pci 0000:04:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
- pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:04:00.0: reg 1c: [mem 0xdc000000-0xddffffff 64bit]
- pci 0000:04:00.0: reg 24: [io 0xe800-0xe87f]
- pci 0000:04:00.0: reg 30: [mem 0xdefe0000-0xdeffffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 04-04]
- pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdfffffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 03-03]
- pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:02:00.0: reg 10: [mem 0xdbfc0000-0xdbffffff 64bit]
- pci 0000:02:00.0: reg 30: [mem 0xdbfa0000-0xdbfbffff pref]
- pci 0000:02:00.0: PME# supported from D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.1: bridge window [mem 0xdbf00000-0xdbffffff]
- pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- HEST: Table is not found!
- vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 000000007ffa0000 - 000000007fffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 17 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
- system 00:07: [io 0x0290-0x0297] has been reserved
- system 00:08: [io 0x04d0-0x04d1] has been reserved
- system 00:08: [io 0x0800-0x087f] has been reserved
- system 00:08: [io 0x0480-0x04bf] has been reserved
- system 00:08: [io 0x0900-0x091f] has been reserved
- system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
- system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
- system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
- system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:0e: [mem 0xffc00000-0xfff7ffff] has been reserved
- system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved
- system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:10: [mem 0x000c0000-0x000dffff] could not be reserved
- system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:10: [mem 0x00100000-0x7fffffff] could not be reserved
- pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
- pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
- pci 0000:00:01.0: PCI bridge to [bus 04-04]
- pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdfffffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 03-03]
- pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
- pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.1: bridge window [mem 0xdbf00000-0xdbffffff]
- pci 0000:00:1c.1: bridge window [mem pref disabled]
- pci 0000:00:1e.0: PCI bridge to [bus 01-01]
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem disabled]
- pci 0000:00:1e.0: bridge window [mem pref disabled]
- pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:01.0: setting latency timer to 64
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdfffffff]
- pci_bus 0000:04: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
- pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:02: resource 1 [mem 0xdbf00000-0xdbffffff]
- pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
- pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:04:00.0: Boot video device
- PCI: CLS 16 bytes, default 64
- Unpacking initramfs...
- Freeing initrd memory: 1648k freed
- apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
- apm: disabled - APM is not SMP safe.
- Scanning for low memory corruption every 60 seconds
- audit: initializing netlink socket (disabled)
- type=2000 audit(1296184197.313:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1709
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- ERST: Table is not found!
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- serio: i8042 KBD port at 0x60,0x64 irq 1
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- PM: Resume from disk failed.
- registered taskstats version 1
- rtc_cmos 00:03: setting system clock to 2011-01-28 03:09:58 UTC (1296184198)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 428k freed
- udev[38]: starting version 165
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- ata_piix 0000:00:1f.2: setting latency timer to 64
- scsi2 : ata_piix
- scsi3 : ata_piix
- ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23
- ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23
- ata1.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.15, max UDMA/33
- ata1.00: configured for UDMA/33
- scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.15 PQ: 0 ANSI: 5
- ata3.00: HPA detected: current 488395055, native 488397168
- ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
- ata3.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata3.00: configured for UDMA/133
- scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
- sd 2:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
- sd 2:0:0:0: [sda] Write Protect is off
- sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4
- sd 2:0:0:0: [sda] Attached SCSI disk
- sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 0:0:0:0: Attached scsi CD-ROM sr0
- EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
- udev[637]: starting version 165
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- sr 0:0:0:0: Attached scsi generic sg0 type 5
- sd 2:0:0:0: Attached scsi generic sg1 type 0
- input: PC Speaker as /devices/platform/pcspkr/input/input0
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- intel_rng: FWH not detected
- fuse init (API version 7.15)
- lp: driver loaded but no devices found
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- Linux agpgart interface v0.103
- ACPI: acpi_idle registered with cpuidle
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- parport_pc 00:06: reported by Plug and Play ACPI
- parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
- iTCO_vendor_support: vendor-support=0
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: using broken periodic workaround
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
- ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdbeffc00
- lp0: using parport0 (interrupt-driven).
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- ppdev: user-space parallel port driver
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- Atheros(R) L2 Ethernet Driver - version 2.2.3
- Copyright (c) 2007 Atheros Corporation.
- atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- atl2 0000:02:00.0: setting latency timer to 64
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
- iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- leds_ss4200: no LED devices found
- usb 5-1: new low speed USB device using uhci_hcd and address 2
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- nvidia: module license 'NVIDIA' taints kernel.
- Disabling lock debugging due to kernel taint
- usbcore: registered new interface driver hiddev
- input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
- generic-usb 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input0
- input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input4
- generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- nvidia 0000:04:00.0: setting latency timer to 64
- vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.36 Tue Jan 18 17:10:40 PST 2011
- EXT4-fs (sda3): re-mounted. Opts: (null)
- atl2 0000:02:00.0: irq 41 for MSI/MSI-X
- atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
- sshd (1249): /proc/1249/oom_adj is deprecated, please use /proc/1249/oom_score_adj instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement