Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
- 3330548 bytes read
- Booting from mmc ...
- ## Booting kernel from Legacy Image at 80200000 ...
- Image Name: Angstrom/2.6.39/beagleboard
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3330484 Bytes = 3.2 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.39+ (matthew@matthew-P-7811FX) (gcc version 4.5.4 20110917 (prerelease) (GCC) ) #1 Thu Dec 8 20:33:38 CST 2011
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Beagle expansionboard: none
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=lbcm3m1 vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 500MB = 500MB total
- [ 0.000000] Memory: 498548k/498548k available, 25740k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc003d000 ( 212 kB)
- [ 0.000000] .text : 0xc003d000 - 0xc062c7d8 (6078 kB)
- [ 0.000000] .data : 0xc062e000 - 0xc0679b00 ( 303 kB)
- [ 0.000000] NR_IRQS:410
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000183] Calibrating delay loop... 500.97 BogoMIPS (lpj=1953792)
- [ 0.039306] pid_max: default: 32768 minimum: 301
- [ 0.039520] Mount-cache hash table entries: 512
- [ 0.039886] Initializing cgroup subsys ns
- [ 0.039886] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- [ 0.039916] Initializing cgroup subsys cpuacct
- [ 0.039947] Initializing cgroup subsys memory
- [ 0.039978] Initializing cgroup subsys devices
- [ 0.040008] Initializing cgroup subsys freezer
- [ 0.040008] Initializing cgroup subsys blkio
- [ 0.040039] Initializing cgroup subsys perf_event
- [ 0.040130] CPU: Testing write buffer coherency: ok
- [ 0.040893] devtmpfs: initialized
- [ 0.042083] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
- [ 0.042114] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- [ 0.042114] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- [ 0.055694] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
- [ 0.068084] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
- [ 0.080474] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
- [ 0.081787] print_constraints: dummy:
- [ 0.082000] NET: Registered protocol family 16
- [ 0.082153] GPMC revision 5.0
- [ 0.083129] OMAP GPIO hardware version 2.5
- [ 0.083221] OMAP GPIO hardware version 2.5
- [ 0.083343] OMAP GPIO hardware version 2.5
- [ 0.083435] OMAP GPIO hardware version 2.5
- [ 0.083526] OMAP GPIO hardware version 2.5
- [ 0.083618] OMAP GPIO hardware version 2.5
- [ 0.084655] omap_mux_init: Add partition: #1: core, flags: 0
- [ 0.084777] OMAP3 Beagle Rev: xM
- [ 0.087127] Found NAND on CS0
- [ 0.087158] Registering NAND on CS0
- [ 0.087249] Unable to get DVI reset GPIO
- [ 0.087310] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.089874] OMAP DMA hardware revision 5.0
- [ 0.098236] bio: create slab <bio-0> at 0
- [ 0.099365] SCSI subsystem initialized
- [ 0.100646] usbcore: registered new interface driver usbfs
- [ 0.100799] usbcore: registered new interface driver hub
- [ 0.100952] usbcore: registered new device driver usb
- [ 0.111450] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
- [ 0.114013] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.114044] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.114471] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.115875] beagle_twl_gpio_setup: unable to configure DVI_LDO_EN
- [ 0.116607] print_constraints: VUSB1V5: 1500 mV normal standby
- [ 0.117034] print_constraints: VUSB1V8: 1800 mV normal standby
- [ 0.117401] print_constraints: VUSB3V1: 3100 mV normal standby
- [ 0.119171] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.119842] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- [ 0.120269] print_constraints: VDAC: 1800 mV normal standby
- [ 0.120635] print_constraints: VDVI: 1800 mV normal standby
- [ 0.121124] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.121612] print_constraints: VAUX3: 1800 mV normal standby
- [ 0.122070] print_constraints: VAUX4: 1800 mV normal standby
- [ 0.122344] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- [ 0.131072] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
- [ 0.131347] omap_device: omap_i2c.3: new worst case deactivate latency 0: 30517
- [ 0.131805] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.132385] Bluetooth: Core ver 2.16
- [ 0.132446] NET: Registered protocol family 31
- [ 0.132476] Bluetooth: HCI device and connection manager initialized
- [ 0.132476] Bluetooth: HCI socket layer initialized
- [ 0.132507] Bluetooth: L2CAP socket layer initialized
- [ 0.132659] Bluetooth: SCO socket layer initialized
- [ 0.132904] Switching to clocksource 32k_counter
- [ 0.137786] Switched to NOHz mode on CPU #0
- [ 0.144012] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- [ 0.147064] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.147644] NET: Registered protocol family 2
- [ 0.147857] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.148223] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.148590] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.148834] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.148864] TCP reno registered
- [ 0.148895] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.148895] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.149261] NET: Registered protocol family 1
- [ 0.150146] RPC: Registered udp transport module.
- [ 0.150177] RPC: Registered tcp transport module.
- [ 0.150177] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.151367] omap-iommu omap-iommu.0: isp registered
- [ 0.152954] VFS: Disk quotas dquot_6.5.2
- [ 0.152984] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.153564] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.153930] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.153961] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.154602] msgmni has been set to 973
- [ 0.156158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.156311] io scheduler noop registered
- [ 0.156311] io scheduler deadline registered
- [ 0.156372] io scheduler cfq registered (default)
- [ 0.219085] OMAP DSS rev 2.0
- [ 0.547607] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.548858] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- [ 0.549163] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- [ 0.549407] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- [ 1.339080] console [ttyO2] enabled
- [ 1.343048] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- [ 1.358062] brd: module loaded
- [ 1.364990] loop: module loaded
- [ 1.369140] TWL5030: Enabling workaround for Si Erratum 27
- [ 1.393890] omap2-nand driver initializing
- [ 1.398559] No NAND device found.
- [ 1.402282] No NAND device found.
- [ 1.406768] usbcore: registered new interface driver catc
- [ 1.412414] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
- [ 1.418731] usbcore: registered new interface driver kaweth
- [ 1.424591] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
- [ 1.432525] usbcore: registered new interface driver pegasus
- [ 1.438476] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- [ 1.445739] usbcore: registered new interface driver rtl8150
- [ 1.451721] usbcore: registered new interface driver asix
- [ 1.457489] usbcore: registered new interface driver cdc_ether
- [ 1.463684] usbcore: registered new interface driver dm9601
- [ 1.469604] usbcore: registered new interface driver smsc95xx
- [ 1.475708] usbcore: registered new interface driver gl620a
- [ 1.481628] usbcore: registered new interface driver net1080
- [ 1.487640] usbcore: registered new interface driver plusb
- [ 1.493469] usbcore: registered new interface driver rndis_host
- [ 1.499725] usbcore: registered new interface driver cdc_subset
- [ 1.506011] usbcore: registered new interface driver zaurus
- [ 1.511932] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 1.520141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.527130] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
- [ 1.535491] _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator
- [ 3.554901] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 3.561126] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 3.569030] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- [ 3.586181] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 3.592285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.599426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.607025] usb usb1: Product: OMAP-EHCI Host Controller
- [ 3.612609] usb usb1: Manufacturer: Linux 2.6.39+ ehci_hcd
- [ 3.618377] usb usb1: SerialNumber: ehci-omap.0
- [ 3.623779] hub 1-0:1.0: USB hub found
- [ 3.627777] hub 1-0:1.0: 3 ports detected
- [ 3.656494] Initializing USB Mass Storage driver...
- [ 3.661743] usbcore: registered new interface driver usb-storage
- [ 3.668090] USB Mass Storage support registered.
- [ 3.673309] mousedev: PS/2 mouse device common for all mice
- [ 3.679626] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 3.688232] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
- [ 3.700042] rtc-ds1307: probe of 2-0068 failed with error -5
- [ 3.706085] i2c /dev entries driver
- [ 3.710266] Linux media interface: v0.10
- [ 3.714508] Linux video capture interface: v2.00
- [ 3.719635] vpfe_init
- [ 3.722625] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 3.729125] Bluetooth: HCI UART driver ver 2.2
- [ 3.733795] Bluetooth: HCI H4 protocol initialized
- [ 3.738830] Bluetooth: HCI BCSP protocol initialized
- [ 3.744049] Bluetooth: HCILL protocol initialized
- [ 3.748992] Bluetooth: HCIATH3K protocol initialized
- [ 3.754211] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 3.760192] usbcore: registered new interface driver btusb
- [ 3.766021] cpuidle: using governor ladder
- [ 3.770324] cpuidle: using governor menu
- [ 3.776824] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16
- [ 3.786041] usbcore: registered new interface driver usbhid
- [ 3.791931] usbhid: USB HID core driver
- [ 3.796447] usbcore: registered new interface driver snd-usb-audio
- [ 3.803558] OMAP3 Beagle/Devkit8000 SoC init
- [ 3.817291] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
- [ 3.826782] ALSA device list:
- [ 3.829986] #0: omap3beagle
- [ 3.833068] oprofile: hardware counters not available
- [ 3.838378] oprofile: using timer interrupt.
- [ 3.843200] TCP cubic registered
- [ 3.846649] NET: Registered protocol family 17
- [ 3.851348] NET: Registered protocol family 15
- [ 3.856079] lib80211: common routines for IEEE802.11 drivers
- [ 3.862030] Registering the dns_resolver key type
- [ 3.867065] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 3.875213] ThumbEE CPU extension supported.
- [ 3.881072] Power Management for TI OMAP3.
- [ 3.885620] omap_init_power_states: core off state C7 disabled due to i583
- [ 3.893280] sr_init: No PMIC hook to init smartreflex
- [ 3.898864] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 3.907165] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 3.915679] SmartReflex Class3 initialized
- [ 3.921051] ------------[ cut here ]------------
- [ 3.925933] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x68/0x88()
- [ 3.932617] sysfs: cannot create duplicate filename '/devices/platform/omap/omap_i2c.2'
- [ 3.941040] Modules linked in:
- [ 3.944274] [<c0046984>] (unwind_backtrace+0x0/0xe0) from [<c006c72c>] (warn_slowpath_common+0x4c/0x64)
- [ 3.954162] [<c006c72c>] (warn_slowpath_common+0x4c/0x64) from [<c006c7c4>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 3.964233] [<c006c7c4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c013010c>] (sysfs_add_one+0x68/0x88)
- [ 3.973632] [<c013010c>] (sysfs_add_one+0x68/0x88) from [<c0130188>] (create_dir+0x5c/0xa4)
- [ 3.982421] [<c0130188>] (create_dir+0x5c/0xa4) from [<c0130290>] (sysfs_create_dir+0xa4/0xbc)
- [ 3.991516] [<c0130290>] (sysfs_create_dir+0xa4/0xbc) from [<c0237f98>] (kobject_add_internal+0xb8/0x1bc)
- [ 4.001586] [<c0237f98>] (kobject_add_internal+0xb8/0x1bc) from [<c0238370>] (kobject_add+0x68/0x8c)
- [ 4.011199] [<c0238370>] (kobject_add+0x68/0x8c) from [<c029c02c>] (device_add+0xac/0x52c)
- [ 4.019897] [<c029c02c>] (device_add+0xac/0x52c) from [<c029fdac>] (platform_device_add+0x108/0x164)
- [ 4.029510] [<c029fdac>] (platform_device_add+0x108/0x164) from [<c005cd24>] (omap_device_build_ss+0x15c/0x2d0)
- [ 4.040130] [<c005cd24>] (omap_device_build_ss+0x15c/0x2d0) from [<c005cee0>] (omap_device_build+0x48/0x50)
- [ 4.050354] [<c005cee0>] (omap_device_build+0x48/0x50) from [<c00148d0>] (omap_i2c_add_bus+0xa4/0xf4)
- [ 4.060058] [<c00148d0>] (omap_i2c_add_bus+0xa4/0xf4) from [<c0012288>] (beagle_camera_init+0x98/0xe4)
- [ 4.069854] [<c0012288>] (beagle_camera_init+0x98/0xe4) from [<c003d474>] (do_one_initcall+0x90/0x160)
- [ 4.079650] [<c003d474>] (do_one_initcall+0x90/0x160) from [<c0008960>] (kernel_init+0xa4/0x154)
- [ 4.088897] [<c0008960>] (kernel_init+0xa4/0x154) from [<c0042d14>] (kernel_thread_exit+0x0/0x8)
- [ 4.098144] ---[ end trace 5c82230ea1e5dd73 ]---
- [ 4.103027] kobject_add_internal failed for omap_i2c.2 with -EEXIST, don't try to register things with the same name in the same directory.
- [ 4.116180] [<c0046984>] (unwind_backtrace+0x0/0xe0) from [<c0238070>] (kobject_add_internal+0x190/0x1bc)
- [ 4.126251] [<c0238070>] (kobject_add_internal+0x190/0x1bc) from [<c0238370>] (kobject_add+0x68/0x8c)
- [ 4.135955] [<c0238370>] (kobject_add+0x68/0x8c) from [<c029c02c>] (device_add+0xac/0x52c)
- [ 4.144653] [<c029c02c>] (device_add+0xac/0x52c) from [<c029fdac>] (platform_device_add+0x108/0x164)
- [ 4.154235] [<c029fdac>] (platform_device_add+0x108/0x164) from [<c005cd24>] (omap_device_build_ss+0x15c/0x2d0)
- [ 4.164855] [<c005cd24>] (omap_device_build_ss+0x15c/0x2d0) from [<c005cee0>] (omap_device_build+0x48/0x50)
- [ 4.175109] [<c005cee0>] (omap_device_build+0x48/0x50) from [<c00148d0>] (omap_i2c_add_bus+0xa4/0xf4)
- [ 4.184814] [<c00148d0>] (omap_i2c_add_bus+0xa4/0xf4) from [<c0012288>] (beagle_camera_init+0x98/0xe4)
- [ 4.194580] [<c0012288>] (beagle_camera_init+0x98/0xe4) from [<c003d474>] (do_one_initcall+0x90/0x160)
- [ 4.204376] [<c003d474>] (do_one_initcall+0x90/0x160) from [<c0008960>] (kernel_init+0xa4/0x154)
- [ 4.213623] [<c0008960>] (kernel_init+0xa4/0x154) from [<c0042d14>] (kernel_thread_exit+0x0/0x8)
- [ 4.222839] omap_device: omap_i2c: build failed (-17)
- [ 4.228149] ------------[ cut here ]------------
- [ 4.233001] WARNING: at arch/arm/plat-omap/i2c.c:166 omap_i2c_add_bus+0xc4/0xf4()
- [ 4.240875] Could not build omap_device for omap_i2c
- [ 4.246093] Modules linked in:
- [ 4.249298] [<c0046984>] (unwind_backtrace+0x0/0xe0) from [<c006c72c>] (warn_slowpath_common+0x4c/0x64)
- [ 4.259185] [<c006c72c>] (warn_slowpath_common+0x4c/0x64) from [<c006c7c4>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 4.269226] [<c006c7c4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00148f0>] (omap_i2c_add_bus+0xc4/0xf4)
- [ 4.278930] [<c00148f0>] (omap_i2c_add_bus+0xc4/0xf4) from [<c0012288>] (beagle_camera_init+0x98/0xe4)
- [ 4.288726] [<c0012288>] (beagle_camera_init+0x98/0xe4) from [<c003d474>] (do_one_initcall+0x90/0x160)
- [ 4.298492] [<c003d474>] (do_one_initcall+0x90/0x160) from [<c0008960>] (kernel_init+0xa4/0x154)
- [ 4.307739] [<c0008960>] (kernel_init+0xa4/0x154) from [<c0042d14>] (kernel_thread_exit+0x0/0x8)
- [ 4.316986] ---[ end trace 5c82230ea1e5dd74 ]---
- [ 4.321899] usb 1-2: new high speed USB device number 2 using ehci-omap
- [ 4.329345] _regulator_get: omap3isp supply VDD_CSIPHY1 not found, using dummy regulator
- [ 4.337982] _regulator_get: omap3isp supply VDD_CSIPHY2 not found, using dummy regulator
- [ 4.346740] omap3isp omap3isp: Revision 15.0 found
- [ 4.351837] omap-iommu omap-iommu.0: isp: version 1.1
- [ 4.384124] mt9p031 2-0048: Detected a MT9P031 chip ID 1801
- [ 4.404663] clock: disabling unused clocks to save power
- [ 4.411224] registered taskstats version 1
- [ 4.416351] fbcvt: 640x480@60: CVT Name - .307M3-R
- [ 4.432861] Console: switching to colour frame buffer device 80x30
- [ 4.446533] regulator_init_complete: VDAC: incomplete constraints, leaving on
- [ 4.454925] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 4.461669] omap_vout omap_vout: Buffer Size = 3686400
- [ 4.468231] omap_vout omap_vout: : registered and initialized video device 16
- [ 4.476684] Waiting for root device /dev/mmcblk0p2...
- [ 4.489471] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 4.501159] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
- [ 4.508209] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.515960] mmc0: new high speed SDHC card at address 1234
- [ 4.522613] mmcblk0: mmc0:1234 SA08G 7.41 GiB
- [ 4.527587] hub 1-2:1.0: USB hub found
- [ 4.532043] mmcblk0: detected capacity change from 0 to 7960788992
- [ 4.539215] hub 1-2:1.0: 5 ports detected
- [ 4.543640] mmcblk0: p1 p2
- [ 4.595703] EXT3-fs: barriers not enabled
- [ 4.836547] usb 1-2.1: new high speed USB device number 3 using ehci-omap
- [ 4.961883] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 4.969116] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.979980] smsc95xx v1.0.4
- [ 5.062561] smsc95xx 1-2.1:1.0: eth0: Features changed: 0x00004808 -> 0x00004008
- [ 5.070495] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 3e:76:c2:49:06:51
- [ 14.852905] kjournald starting. Commit interval 5 seconds
- [ 15.491912] EXT3-fs (mmcblk0p2): using internal journal
- [ 15.497436] EXT3-fs (mmcblk0p2): recovery complete
- [ 15.511291] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
- [ 15.518768] VFS: Mounted root (ext3 filesystem) on device 179:2.
- [ 15.530303] devtmpfs: mounted
- [ 15.533721] Freeing init memory: 212K
- INIT: version 2.86 booting
- Please wait: booting...
- Starting udev
- [ 16.554901] udev: starting version 151
- [ 16.560455] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
- Remounting root file system...
- udevadm settle - timeout of 8 seconds reached, the event queue contains:
- /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:1234/block/mmcblk0 (693)
- /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:1234/block/mmcblk0/mmcblk0p1 (694)
- /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:1234/block/mmcblk0/mmcblk0p2 (695)
- /sys/devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.1/1-2.1:1.0/net/eth0 (726)
- /sys/devices/virtual/block/loop0 (770)
- /sys/devices/virtual/block/loop1 (771)
- /sys/devices/virtual/block/loop2 (772)
- /sys/devices/virtual/block/loop3 (773)
- /sys/devices/virtual/block/loop4 (774)
- /sys/devices/virtual/block/loop5 (775)
- /sys/devices/virtual/block/loop6 (776)
- /sys/devices/virtual/block/loop7 (777)
- /sys/devices/virtual/block/ram0 (778)
- /sys/devices/virtual/block/ram1 (779)
- /sys/devices/virtual/block/ram10 (780)
- /sys/devices/virtual/block/ram11 (781)
- /sys/devices/virtual/block/ram12 (782)
- /sys/devices/virtual/block/ram13 (783)
- /sys/devices/virtual/block/ram14 (784)
- /sys/devices/virtual/block/ram15 (785)
- /sys/devices/virtual/block/ram2 (786)
- /sys/devices/virtual/block/ram3 (787)
- /sys/devices/virtual/block/ram4 (788)
- /sys/devices/virtual/block/ram5 (789)
- /sys/devices/virtual/block/ram6 (790)
- /sys/devices/virtual/block/ram7 (791)
- /sys/devices/virtual/block/ram8 (792)
- /sys/devices/virtual/block/ram9 (793)
- Caching udev devnodes
- Populating dev cache
- ALSA: Restoring mixer settings...
- Configuring network interfaces... /usr/sbin/alsactl: parse:1655: Unable to open file '/usr/share/alsa/init/00main': No such file or directory
- udhcpc (v1.13.2) started
- run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
- Sending discover...
- Sending discover...
- Sending discover...
- mt9p031 2-0048: Detected a MT9P031 chip ID 1801No lease, forking to background
- ifconfig: SIOCGIFFLAGS: No such device
- done.
- Starting portmap daemon: portmap.
- net.ipv4.conf.default.rp_filter = 1
- net.ipv4.conf.all.rp_filter = 1
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Mon Oct 10 02:11:00 UTC 2011
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- INIT: Entering runlevel: 5
- Starting system message bus: dbus.
- Starting Dropbear SSH server: dropbear.
- Starting advanced power management daemon: No APM support in kernel
- (failed.)
- Starting Samba: smbd nmbd.
- Starting syslogd/klogd: done
- * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
- cups: started scheduler.
- .-------.
- | | .-.
- | | |-----.-----.-----.| | .----..-----.-----.
- | | | __ | ---'| '--.| .-'| | |
- | | | | | |--- || --'| | | ' | | | |
- '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
- -' |
- '---'
- The Angstrom Distribution beagleboard ttyO2
- Angstrom 2010.7-test-20110220 beagleboard ttyO2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement