Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 version : 2.0.0�
- read dram para.
- dram driver version: 1.15
- dram size =1024MB
- 0xffffffff
- super_standby_flag = 0
- boot card number =0
- sdcard 0 init ok
- The size of Boot1 is 0x00048000.
- Succeed in loading boot1 from sdmmc flash.
- Ready to disable icache.
- Succeed in loading Boot1.
- Jump to Boot1.
- [ 0.125] boot1 version : 2.0.0
- [ 0.125] script installed early ok
- [ 0.126] pmu type = 3
- [ 0.230] bat vol = 732 mv
- [ 0.242] axi:ahb:apb=4:2:2
- [ 0.242] set dcdc2=1400mv, clock=912M successed
- [ 0.244] key
- [ 0.257] no key found
- [ 0.257] flash init start
- [ 0.271] flash init finish
- [ 0.274] fs init ok
- [ 0.275] fattype FAT16
- [ 0.275] fs mount ok
- [ 0.277] storage_type=1
- [ 0.290] 0
- [ 0.291] set pc
- [ 0.291] usbdc_vol = 4000, usbdc_cur = 0
- [ 0.293] usbpc_vol = 4400, usbpc_cur = 0
- [ 0.297] init to usb pc
- [ 0.300] set pc
- [ 0.383] _____________________________________________PFO
- [ 0.383] key value = 0
- [ 0.386] recovery key high 40, low 4
- [ 0.497] show pic finish
- [ 0.497] load kernel start
- [ 0.521] load kernel successed
- [ 0.521] start address = 0x4a000000
- [ 0.704] *****************************************************************
- [ 0.705] ***
- [ 0.707] *** LCD Panel Parameter Check
- [ 0.711] ***
- [ 0.713] *** by dulianping
- [ 0.717] ***
- [ 0.719] *****************************************************************
- [ 0.726] ***
- [ 0.728] *** Interface:[ 0.730] *** 18Bit LVDS Panel
- [ 0.734] *** Lcd Frm Disable
- [ 0.737] ***
- [ 0.739] *** Timing:
- [ 0.741] *** lcd_x: 800
- [ 0.744] *** lcd_y: 480
- [ 0.748] *** lcd_ht: 1055
- [ 0.751] *** lcd_hbp: 46
- [ 0.754] *** lcd_vt: 1050
- [ 0.757] *** lcd_vbp: 23
- [ 0.760] *** lcd_hspw: 0
- [ 0.763] *** lcd_vspw: 0
- [ 0.767] *** lcd_frame_frq: 59Hz
- [ 0.770] ***
- [ 0.772] *** WRN01: Recommend "lcd_frm = 1"
- [ 0.777] ***
- [ 0.778] *** LCD Panel Parameter Check End
- [ 0.783] *****************************************************************
- [ 1.056] power exit detec
- U-Boot 2011.09-rc1-00000-gb2f1c47-dirty (Dec 14 2015 - 07:41:39) Allwinner Technology
- CPU: SUNXI Family
- Board: SUN7I-EVB
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:11-
- -name- -start- -size-
- bootloader : 8000 8000
- env : 10000 8000
- boot : 18000 8000
- system : 20000 140000
- data : 160000 100000
- misc : 260000 8000
- recovery : 268000 10000
- cache : 278000 140000
- databk : 3b8000 80000
- private : 438000 8000
- UDISK : 440000 2fc000
- -----------------------------------
- bootcmd set setargs_mmc
- Hit any key to stop autoboot: 0
- sun7i#
- sun7i#reboot
- Unknown command 'reboot' - try 'help'
- sun7i#boot
- Starting kernel ...
- [ 0.821465] Invalid MAC address. Calcul random one !!
- [ 1.084876] something wrong in chip id
- [ 1.770194] something wrong in chip id
- [ 1.775142] something wrong in chip id
- [ 2.440898] init: property 'ro.zygote' doesn't exist while expanding '/init.${ro.zygote}.rc'
- [ 2.450436] init: error while handling import on line '10' in '/init.rc'
- [ 2.458194] init: /init.rc: 181: invalid command 'load_all_props'
- [ 2.472474] something wrong in chip id
- [ 2.632983] init: /dev/hw_random not found
- [ 5.186036] healthd: wakealarm_init: timerfd_create failed
- [ 5.661378] i2c i2c-1: Invalid 7-bit I2C address 0x00
- [ 5.869414] [gpio-err] __pio_to_irq: invalid pio to irq
- [ 5.876762] [gpio-err] __pio_to_irq: invalid pio to irq
- [ 5.883893] [gpio-err] __pio_to_irq: invalid pio to irq
- [ 5.891110] [gpio-err] __pio_to_irq: invalid pio to irq
- [ 5.915596] android_usb: already disabled
- [ 5.925746] something wrong in chip id
- [ 6.053517] something wrong in chip id
- root@wing-nck70:/ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement