kde-plasma Mer image on imx53 log

Environment size: 1581/131068 bytes
MX53-LOCO U-Boot > set bootargs console=ttymxc0,115200 init=/bin/init root=/dev/mmcblk0p4 di1_primary video=mxcdi1fb:GBR24,VGA-XGA vga
MX53-LOCO U-Boot > save
Saving Environment to MMC...
Writing to MMC(0)... done
MX53-LOCO U-Boot >

U-Boot 2009.08-00322-gebfa1ed-dirty (Nov 14 2011 - 14:57:01)

CPU:   Freescale i.MX53 family 2.1V at 800 MHz
mx53 pll1: 800MHz
mx53 pll2: 400MHz
mx53 pll3: 216MHz
mx53 pll4: 455MHz
ipg clock     : 66666666Hz
ipg per clock : 33333333Hz
uart clock    : 66666666Hz
cspi clock    : 54000000Hz
ahb clock     : 133333333Hz
axi_a clock   : 400000000Hz
axi_b clock   : 200000000Hz
&8&���3���2Ϙ�Ɔ���&�console [ttymxc0] enabled, bootconsole disabled
console [ttymxc0] enabled, boonmx aq i.2:00c000 (Frmxt MM= 13MX
 t0000eesclo modahci: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc
scsi0 : ahci
ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 28
MXC MTD nand Driver 3.0
i.MX GPMI NFC
vcan: Virtual CAN interface driver
Freescale FlexCAN Driver
FEC Ethernet Driver
fec_enet_mii_bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
mice: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
MXC keypad loaded
DA9052 TSI Device Driver, v1.0
input: da9052-tsi as /devices/virtual/input/input1
TSI Drv Successfully Inserted da9052-tsi
input: da9052-onkey as /devices/platform/imx-i2c.0/i2c-0/0-0048/da9052-onkey/input/input2
mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
APM Battery Driver
ata1: SATA link down (SStatus 0 SControl 300)
check mma8450 chip ID
mma8450 0-001c: build time Dec 21 2011 14:17:07
input: mma8450 as /devices/platform/imx-i2c.0/i2c-0/0-001c/input/input3
add mma8450 i2c driver
add mma8451 i2c driver
MXC WatchDog Driver 2.0
MXC Watchdog # 0 Timer: initial timeout 60 sec
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCIATH protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
VPU initialized
mxc_asrc registered
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 203 irq 3 INTERNAL DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Cirrus Logic CS42888 ALSA SoC Codec Driver
sgtl5000-i2c 1-000a: SGTL5000 revision 17
No device for DAI imx-ssi-1-0
No device for DAI imx-ssi-1-1
No device for DAI imx-ssi-2-0
No device for DAI imx-ssi-2-1
DMA Sound Buffers Allocated:UseIram=1 buf->addr=f8002000 buf->area=e0842000 size=24576
DMA Sound Buffers Allocated:UseIram=1 buf->addr=cf440000 buf->area=fa0c4000 size=24576
asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 NCard 3.72 GiB
 mmcblk0: p1 p2 p3 < p5 p6 > p4
ALSA device list:
  #0: imx-3stack (SGTL5000)
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
regulator_init_complete: incomplete constraints, leaving DA9052_BUCK_MEM on
regulator_init_complete: incomplete constraints, leaving DA9052_BUCK_PRO on
regulator_init_complete: incomplete constraints, leaving DA9052_BUCK_CORE on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO10 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO8 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO7 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO6 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO4 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO3 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO2 on
regulator_init_complete: incomplete constraints, leaving DA9052_LDO1 on
mxc_rtc mxc_rtc.0: setting system clock to 1970-01-01 00:30:27 UTC (1827)
EXT3-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (200)
EXT2-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (200)
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing init memory: 172K
Failed to execute /bin/init.  Attempting defaults...
<27>systemd[1]: Failed to mount /sys/fs/cgroup: No such file or directory
<27>systemd[1]: Failed to mount /sys/fs/cgroup/systemd: No such file or directory
<27>systemd[1]: Failed to enumerate cgroup controllers: No such file or directory
<30>systemd[1]: systemd 37 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -SYSVINIT -LIBCRYPTSETUP; meego)

Welcome to MeeGo release 1.2.90 (MeeGo)!

<28>systemd[1]: /sbin/modprobe failed with error code 1.
<30>systemd[1]: Set hostname to <localhost.localdomain>.
<28>systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replac.
<28>systemd[1]: CONFIG_CGROUPS was not set when your kernel was compiled. Systems without control groups are not supported. We will now sl.
<28>systemd[1]: No control group support available, not creating root group.
Started Replay Read-Ahead Data.
Starting Collect Read-Ahead Data...
Starting Media Directory...
Starting Runtime Directory...
Started POSIX Message Queue File System.
Started Security File System.
Started Huge Pages File System.
Started Debug File System.
Starting udev Coldplug all Devices...
Starting udev Kernel Device Manager...
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge.
Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.
<30>udevd[51]: starting version 172
Started udev Kernel Device Manager.
Started Runtime Directory.
Started Media Directory.
Started udev Coldplug all Devices.
<27>systemd-readahead-collect[47]: Failed to create fanotify object: Function not implemented
Started Collect Read-Ahead Data.
Starting Remount API VFS...
Started Set Up Additional Binary<30> Formats.
systemd-stdout-syslog-bridge[53]: Failed to accept new connection: Function not implementedStarting Apply Kernel Variables...
Starting Setup Virtual Console...

<29>systemd[1]: Started Load Kernel Modules.
Started Configuration File Syssystemd-readahead-collect.service: main process exited, code=exited, status=1tem.
Started FUSE Control File System.
Starting File System Check on Root Device...
Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.
Started Apply Kernel Variables.
Started File System Check on Root Device.
Starting Remount Root FS...

<29>systemd[1]: Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.
systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1Started Remount API VFS.

<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.

<30>systemd-stdout-syslog-bridge[63]: Failed to accept new connection: Function not implemented
<30>systemd-fsck[62]: Root directory is writable, skipping check.
<29>systemd[1]: systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.

<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge.

<30>systemd-stdout-syslog-bridge[73]: Failed to accept new connection: Function not implementedStarting STDOUT Syslog Bridge...

Starting STDOUT Syslog Bridge 29>1;31mfailed, see 'systemctl status systemd-stdout-syslog-bridge.service' for details.
systemd[1]: systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.
<30>systemd-stdout-syslog-bridge[89]: Failed to accept new connection: Function not implemented
<29>systemd[1]: systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.
<30>systemd-stdout-syslog-bridge[91]: Failed to accept new connection: Function not implemented
<29>systemd[1]: systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.
<30>systemd-stdout-syslog-bridge[92]: Failed to accept new connection: Function not implemented
<29>systemd[1]: systemd-stdout-syslog-bridge.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-stdout-syslog-bridge.service entered failed state.
<28>systemd[1]: systemd-stdout-syslog-bridge.service start request repeated too quickly, refusing to start.
EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
Started Remount Root FS.
Starting Load Random Seed...
Starting Recreate Volatile Files and Directories...
Starting Apply Boardname Variables...
Started Load Random Seed.
Started Recreate Volatile Files and Directories.
Started Setup Virtual Console.
Started Apply Boardname Variables.
Starting Console System Startup Logging...
Starting ohm daemon for resource policy management...
Starting Permit User Sessions...
Starting Login Service...
Starting Connection service...
Starting Telephony service...
Starting D-Bus System Message Bus...
Starting UX launcher...
Started UX launcher.
Starting Sensor daemon for sensor framwork...
Started Permit User Sessions.
<27>systemd-logind[215]: Failed to open /sys/class/tty/tty0/active: No such file or directoryStarting Login Service fa
iled, see 'systemctl status <27>systemd-logind.service' for detasystemd-logindils.
[215]: Failed to fully start up daemon: No such file or directory
<29>systemd[1]: systemd-logind.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-logind.service entered failed state.
Started D-Bus System Message Bus.
<13>uxlaunch[219]: uxlaunch v0.64 started.
<13>uxlaunch[219]: user "mer", tty #1, session "default"
<13>uxlaunch[219]: VT_GETSTATE failed
<13>uxlaunch[219]: Xauth cookie file: /var/run/uxlaunch/Xauth-mer-S5oGDP
<30>ofonod[217]: oFono version 0.52
Started Console System Startup Logging.
Started Telephony service.
Started Connection service.
<30>connmand[216]: Connection Manager version 0.77.3
<12>ohmd[213]: GLIB WARNING ** default - Failed to load config file "/etc/ohm/ohmd.ini".Starting ohm daemon for resource policy managemente
mctl status ohmd.service' for details.
<29>modprobe[267]: FATAL: Could not load /lib/modules/2.6.35.3-744-g27fdf7b/modules.dep: No such file or directory
<27>connmand[216]: No IPv6 support; DNS proxy listening only on Legacy IP
<11>ohmd[213]: GLIB ERROR ** default - Failed to allocate plugin table for 0 plugins.
<29>systemd[1]: ohmd.service: main process exited, code=killed, status=5
<29>systemd[1]: Unit ohmd.service entered failed state.
<29>modprobe[269]: FATAL: Could not load /lib/modules/2.6.35.3-744-g27fdf7b/modules.dep: No such file or directory
<27>connmand[216]: No IPv6 support; DNS proxy listening only on Legacy IP
<30>connmand[216]: Checking loopback interface settings
<30>connmand[216]: System hostname is localhost.localdomain
eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
<30>connmand[216]: Adding default profile
<30>connmand[216]: lo {newlink} index 1 operstate 0 <UNKNOWN>
<30>connmand[216]: eth0 {create} index 2 type 1 <ETHER>
<30>connmand[216]: eth0 {update} flags 4098 <DOWN>
<30>connmand[216]: eth0 {newlink} index 2 address 00:04:9F:01:DE:60 mtu 1500
<30>connmand[216]: eth0 {newlink} index 2 operstate 2 <DOWN>
<30>connmand[216]: Create interface eth0 [ ethernet ]
<29>dbus[263]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
<30>connmand[216]: eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
<30>connmand[216]: eth0 {newlink} index 2 address 00:04:9F:01:DE:60 mtu 1500
<30>connmand[216]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
<86>uxlaunch[219]: pam_unix(login:session): session opened for user mer by (uid=0)
<29>dbus[263]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
<29>dbus[263]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Starting Console Manager...
<29>dbus[263]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Started Sensor daemon for sensor framwork.
<30>polkitd[340]: started daemon version 0.101 using authority implementation `local' version `0.101'Started Console Manager.

<29>dbus[263]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
<29>dbus[263]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
<12>ck-collect-session-info[343]: GLIB WARNING ** default - Couldn't read /proc/219/sessionid: Failed to open file '/proc/219/sessionid': y
<13>uxlaunch[219]: Failed to fix /dev/tty permission
<13>uxlaunch[219]: Unable to setpgid()
<13>uxlaunch[219]: Unable to setsid()
<13>uxlaunch[219]: Started Xorg[365]
<13>uxlaunch[365]: starting X server with: "/usr/bin/Xorg :0 -logfile /home/mer/.Xorg.0.log -nolisten tcp -noreset -auth /home/mer/.Xautho"
<30>connmand[216]: eth0 {update} flags 4099 <UP>
<27>connmand[216]: connman_inet_clear_address: Invalid argument
<30>connmand[216]: eth0 {newlink} index 2 address 00:04:9F:01:DE:60 mtu 1500
<30>connmand[216]: eth0 {newlink} index 2 operstate 2 <DOWN>
<27>connmand[216]: connman_inet_clear_address: Invalid argument
<27>connmand[216]: notifier disconnect underflow
<27>connmand[216]: connman_inet_clear_address: Invalid argument
<27>connmand[216]: connman_inet_clear_address: Invalid argument
<27>connmand[216]: connman_inet_clear_address: Invalid argument
<13>uxlaunch[219]: Session filter key = "x-meego-plasma"
<13>uxlaunch[219]: Session program = "/usr/bin/startactive"
<13>uxlaunch[219]: launching session bus: dbus-daemon --fork --session --print-pid 6 --print-address 8
<13>uxlaunch[219]: Error starting session dbus-daemon... dbus may not be functional
<13>uxlaunch[219]: /usr/bin/xhost +SI:localuser:mer failed
<13>uxlaunch[219]: autostart directory "/home/mer/.config/autostart" not found
<13>uxlaunch[219]: do_timeout: done after 0.6secs
<13>uxlaunch[264]: Failed to write oom_core_dj score file: /proc/365/oom_score_adj
<13>uxlaunch[264]: Failed to write oom_core_dj score file: /proc/374/oom_score_adj
<13>uxlaunch[264]: Failed to write oom_core_dj score file: /proc/219/oom_score_adj
<13>uxlaunch[219]: process 365 exited with exit code 1
<13>uxlaunch[219]: Xorg[365] exited, cleaning up
<13>uxlaunch[219]: Unable to open /dev/console, using stdin
<83>uxlaunch[219]: pam_console(login:session): Could not open lock file /var/run/console/mer, disallowing console access
<86>uxlaunch[219]: pam_unix(login:session): session closed for user mer
<13>uxlaunch[219]: Terminating uxlaunch and all children
<29>systemd[1]: uxlaunch.service: main process exited, code=killed, status=9
Starting UX launcher...
Started UX launcher.
<30>systemd[1]: uxlaunch.service holdoff time over, scheduling restart.
<29>systemd[1]: Unit uxlaunch.service entered failed state.
<13>uxlaunch[390]: uxlaunch v0.64 started.
<13>uxlaunch[390]: user "mer", tty #1, session "default"
<13>uxlaunch[390]: VT_GETSTATE failed
<13>uxlaunch[390]: Xauth cookie file: /var/run/uxlaunch/Xauth-mer-VTSQw4
<86>uxlaunch[390]: pam_unix(login:session): session opened for user mer by (uid=0)
<12>ck-collect-session-info[392]: GLIB WARNING ** default - Couldn't read /proc/390/sessionid: Failed to open file '/proc/390/sessionid': y
<13>uxlaunch[390]: Failed to fix /dev/tty permission
<13>uxlaunch[390]: Unable to setpgid()
<13>uxlaunch[390]: Unable to setsid()
<13>uxlaunch[390]: Started Xorg[414]
<13>uxlaunch[414]: starting X server with: "/usr/bin/Xorg :0 -logfile /home/mer/.Xorg.0.log -nolisten tcp -noreset -auth /home/mer/.Xautho"
<13>uxlaunch[390]: Session filter key = "x-meego-plasma"
<13>uxlaunch[390]: Session program = "/usr/bin/startactive"
<13>uxlaunch[390]: launching session bus: dbus-daemon --fork --session --print-pid 6 --print-address 8
<13>uxlaunch[390]: Error starting session dbus-daemon... dbus may not be functional
<13>uxlaunch[390]: /usr/bin/xhost +SI:localuser:mer failed
<13>uxlaunch[390]: autostart directory "/home/mer/.config/autostart" not found
<13>uxlaunch[390]: do_timeout: done after 0.6secs
<13>uxlaunch[391]: Failed to write oom_core_dj score file: /proc/414/oom_score_adj
<13>uxlaunch[391]: Failed to write oom_core_dj score file: /proc/423/oom_score_adj
<13>uxlaunch[391]: Failed to write oom_core_dj score file: /proc/390/oom_score_adj
<13>uxlaunch[390]: process 414 exited with exit code 1
<13>uxlaunch[390]: Xorg[414] exited, cleaning up
<13>uxlaunch[390]: Unable to open /dev/console, using stdin
<83>uxlaunch[390]: pam_console(login:session): Could not open lock file /var/run/console/mer, disallowing console access
<86>uxlaunch[390]: pam_unix(login:session): session closed for user mer
<13>uxlaunch[390]: Terminating uxlaunch and all children
<29>systemd[1]: uxlaunch.service: main process exited, code=killed, status=9
Starting UX launcher...
Started UX launcher.
<30>systemd[1]: uxlaunch.service holdoff time over, scheduling restart.
<29>systemd[1]: Unit uxlaunch.service entered failed state.
<13>uxlaunch[438]: uxlaunch v0.64 started.
<13>uxlaunch[438]: user "mer", tty #1, session "default"
<13>uxlaunch[438]: VT_GETSTATE failed
<13>uxlaunch[438]: Xauth cookie file: /var/run/uxlaunch/Xauth-mer-QPzSG6
<86>uxlaunch[438]: pam_unix(login:session): session opened for user mer by (uid=0)
<12>ck-collect-session-info[440]: GLIB WARNING ** default - Couldn't read /proc/438/sessionid: Failed to open file '/proc/438/sessionid': y
<13>uxlaunch[438]: Failed to fix /dev/tty permission
<13>uxlaunch[438]: Unable to setpgid()
<13>uxlaunch[438]: Unable to setsid()
<13>uxlaunch[438]: Started Xorg[462]
<13>uxlaunch[462]: starting X server with: "/usr/bin/Xorg :0 -logfile /home/mer/.Xorg.0.log -nolisten tcp -noreset -auth /home/mer/.Xautho"
<13>uxlaunch[438]: Session filter key = "x-meego-plasma"
<13>uxlaunch[438]: Session program = "/usr/bin/startactive"
<13>uxlaunch[438]: launching session bus: dbus-daemon --fork --session --print-pid 6 --print-address 8
<13>uxlaunch[438]: Error starting session dbus-daemon... dbus may not be functional
<13>uxlaunch[438]: /usr/bin/xhost +SI:localuser:mer failed
<13>uxlaunch[438]: autostart directory "/home/mer/.config/autostart" not found
<13>uxlaunch[438]: do_timeout: done after 0.6secs
<13>uxlaunch[439]: Failed to write oom_core_dj score file: /proc/462/oom_score_adj
<13>uxlaunch[439]: Failed to write oom_core_dj score file: /proc/471/oom_score_adj
<13>uxlaunch[439]: Failed to write oom_core_dj score file: /proc/438/oom_score_adj
<13>uxlaunch[438]: process 462 exited with exit code 1
<13>uxlaunch[438]: Xorg[462] exited, cleaning up
<13>uxlaunch[438]: Unable to open /dev/console, using stdin
<83>uxlaunch[438]: pam_console(login:session): Could not open lock file /var/run/console/mer, disallowing console access
<86>uxlaunch[438]: pam_unix(login:session): session closed for user mer
<13>uxlaunch[438]: Terminating uxlaunch and all children
<29>systemd[1]: uxlaunch.service: main process exited, code=killed, status=9