API tools faq
paste
Advertisement
kaektech

dmesg output with dvi cape

kaektech
Feb 1st, 2012
109
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.65 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.1.0+ (koen@dominion) (gcc version 4.5.4 20111126 (prerelease) (GCC) ) #1 Thu Jan 26 18:45:40 CET 2012
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c53c7f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: am335xevm
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 65536
  9. [ 0.000000] free_area_init_node: node 0, pgdat c047fd88, node_mem_map c04c6000
  10. [ 0.000000] Normal zone: 512 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 65024 pages, LIFO batch:15
  13. [ 0.000000] AM335X ES1.0 (neon )
  14. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [ 0.000000] pcpu-alloc: [0] 0
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  17. [ 0.000000] Kernel command line: console=ttyO0,115200n8 run_hardware_tests quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ip=none
  18. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  21. [ 0.000000] allocated 1048576 bytes of page_cgroup
  22. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  23. [ 0.000000] Memory: 256MB = 256MB total
  24. [ 0.000000] Memory: 253948k/253948k available, 8196k reserved, 0K highmem
  25. [ 0.000000] Virtual kernel memory layout:
  26. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  28. [ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
  29. [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  30. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  31. [ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB)
  32. [ 0.000000] .text : 0xc0008000 - 0xc040183c (4071 kB)
  33. [ 0.000000] .init : 0xc0402000 - 0xc0436000 ( 208 kB)
  34. [ 0.000000] .data : 0xc0436000 - 0xc0480840 ( 299 kB)
  35. [ 0.000000] .bss : 0xc0480864 - 0xc04c5620 ( 276 kB)
  36. [ 0.000000] NR_IRQS:410 nr_irqs:410 410
  37. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  38. [ 0.000000] Total of 128 interrupts on 1 active controller
  39. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  40. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  41. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  42. [ 0.000000] Console: colour dummy device 80x30
  43. [ 0.000171] Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144)
  44. [ 0.059038] pid_max: default: 32768 minimum: 301
  45. [ 0.059158] Security Framework initialized
  46. [ 0.059213] Mount-cache hash table entries: 512
  47. [ 0.059546] Initializing cgroup subsys cpuacct
  48. [ 0.059576] Initializing cgroup subsys memory
  49. [ 0.059608] Initializing cgroup subsys devices
  50. [ 0.059619] Initializing cgroup subsys freezer
  51. [ 0.059630] Initializing cgroup subsys blkio
  52. [ 0.059651] Initializing cgroup subsys perf_event
  53. [ 0.059726] CPU: Testing write buffer coherency: ok
  54. [ 0.060637] devtmpfs: initialized
  55. [ 0.066862] omap_hwmod: usb_otg_hs: _wait_target_disable failed
  56. [ 0.067301] print_constraints: dummy:
  57. [ 0.067494] NET: Registered protocol family 16
  58. [ 0.067644] GPMC revision 6.0
  59. [ 0.068464] OMAP GPIO hardware version 0.1
  60. [ 0.069235] omap_l3_smx omap_l3_smx.0: couldn't find resource
  61. [ 0.069312] omap_mux_init: Add partition: #1: core, flags: 0
  62. [ 0.071211] omap_i2c.1: alias fck already exists
  63. [ 0.071399] hw-breakpoint: debug architecture 0x4 unsupported.
  64. [ 0.071756] omap2_mcspi.1: alias fck already exists
  65. [ 0.071846] omap2_mcspi.2: alias fck already exists
  66. [ 0.078524] bio: create slab <bio-0> at 0
  67. [ 0.079506] SCSI subsystem initialized
  68. [ 0.080185] usbcore: registered new interface driver usbfs
  69. [ 0.080283] usbcore: registered new interface driver hub
  70. [ 0.080429] usbcore: registered new device driver usb
  71. [ 0.080718] registerd cppi-dma Intr @ IRQ 17
  72. [ 0.080731] Cppi41 Init Done Qmgr-base(d083a000) dma-base(d0838000)
  73. [ 0.080740] Cppi41 Init Done
  74. [ 0.081244] omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
  75. [ 0.081957] Advanced Linux Sound Architecture Driver Version 1.0.24.
  76. [ 0.082415] Switching to clocksource gp timer
  77. [ 0.089110] Switched to NOHz mode on CPU #0
  78. [ 0.091337] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  79. [ 0.091483] musb-hdrc musb-hdrc.0: dma type: dma-cppi41
  80. [ 0.091941] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  81. [ 0.091961] musb-hdrc: MHDRC RTL version 2.0
  82. [ 0.091971] musb-hdrc: setup fifo_mode 4
  83. [ 0.091993] musb-hdrc: 28/31 max ep, 16384/16384 memory
  84. [ 0.092262] musb-hdrc musb-hdrc.0: USB OTG mode controller at d080a000 using DMA, IRQ 18
  85. [ 0.092533] musb-hdrc musb-hdrc.1: dma type: dma-cppi41
  86. [ 0.092968] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  87. [ 0.092987] musb-hdrc: MHDRC RTL version 2.0
  88. [ 0.092997] musb-hdrc: setup fifo_mode 4
  89. [ 0.093017] musb-hdrc: 28/31 max ep, 16384/16384 memory
  90. [ 0.093253] musb-hdrc musb-hdrc.1: USB OTG mode controller at d080c800 using DMA, IRQ 19
  91. [ 0.093547] NET: Registered protocol family 2
  92. [ 0.093721] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  93. [ 0.094065] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  94. [ 0.094221] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  95. [ 0.094315] TCP: Hash tables configured (established 8192 bind 8192)
  96. [ 0.094326] TCP reno registered
  97. [ 0.094339] UDP hash table entries: 256 (order: 0, 4096 bytes)
  98. [ 0.094362] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  99. [ 0.094596] NET: Registered protocol family 1
  100. [ 0.094898] RPC: Registered named UNIX socket transport module.
  101. [ 0.094912] RPC: Registered udp transport module.
  102. [ 0.094921] RPC: Registered tcp transport module.
  103. [ 0.094931] RPC: Registered tcp NFSv4.1 backchannel transport module.
  104. [ 0.095179] omap_init_opp_table: no hwmod or odev for iva, [8] cannot add OPPs.
  105. [ 0.105752] VFS: Disk quotas dquot_6.5.2
  106. [ 0.105814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  107. [ 0.106833] msgmni has been set to 495
  108. [ 0.107700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  109. [ 0.107782] io scheduler noop registered
  110. [ 0.107793] io scheduler deadline registered
  111. [ 0.107843] io scheduler cfq registered (default)
  112. [ 0.108651] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  113. [ 0.109671] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
  114. [ 0.115863] console [ttyO0] enabled
  115. [ 0.116184] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
  116. [ 0.116412] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
  117. [ 0.116639] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
  118. [ 0.116850] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
  119. [ 0.117067] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
  120. [ 0.118194] brd: module loaded
  121. [ 0.121142] loop: module loaded
  122. [ 0.121212] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  123. [ 0.192451] No daughter card found
  124. [ 0.192499] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  125. [ 0.200428] Board name: A335BONE
  126. [ 0.200437] Board version: 00A3
  127. [ 0.200445] The board is a AM335x Beaglebone.
  128. [ 0.200845] omap_i2c.3: alias fck already exists
  129. [ 0.201101] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  130. [ 0.201669] omap_hsmmc.0: alias fck already exists
  131. [ 0.201956] _omap_mux_get_by_name: Could not find signal leds-gpio
  132. [ 0.208792] at24 3-0054: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  133. [ 0.310327] BeagleBone Cape EEPROM: wrong header 0xffffffff, expected 0xee3355aa
  134. [ 0.310340] Could not detect BeagleBone cape properly
  135. [ 0.315654] at24 3-0055: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  136. [ 0.392450] BeagleBone cape EEPROM: could not read eeprom at address 0x55
  137. [ 0.392489] at24 3-0056: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  138. [ 0.472449] BeagleBone cape EEPROM: could not read eeprom at address 0x56
  139. [ 0.472487] at24 3-0057: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  140. [ 0.552450] BeagleBone cape EEPROM: could not read eeprom at address 0x57
  141. [ 0.552462] BeagleBone cape: exporting ADC pins to sysfs
  142. [ 0.553218] SCSI Media Changer driver v0.25
  143. [ 0.602470] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
  144. [ 0.602485] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
  145. [ 0.603297] davinci_mdio.0: probed
  146. [ 0.603312] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
  147. [ 0.603670] usbcore: registered new interface driver catc
  148. [ 0.603681] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  149. [ 0.603732] usbcore: registered new interface driver kaweth
  150. [ 0.603744] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  151. [ 0.603796] usbcore: registered new interface driver pegasus
  152. [ 0.603807] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  153. [ 0.603860] usbcore: registered new interface driver rtl8150
  154. [ 0.603910] usbcore: registered new interface driver asix
  155. [ 0.603959] usbcore: registered new interface driver cdc_ether
  156. [ 0.604020] usbcore: registered new interface driver dm9601
  157. [ 0.604076] usbcore: registered new interface driver cdc_subset
  158. [ 0.604126] usbcore: registered new interface driver zaurus
  159. [ 0.604173] cdc_ncm: 04-Aug-2011
  160. [ 0.604225] usbcore: registered new interface driver cdc_ncm
  161. [ 0.604311] usbcore: registered new interface driver cdc_acm
  162. [ 0.604322] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  163. [ 0.604393] usbcore: registered new interface driver usblp
  164. [ 0.604445] usbcore: registered new interface driver cdc_wdm
  165. [ 0.604497] usbcore: registered new interface driver uas
  166. [ 0.604507] Initializing USB Mass Storage driver...
  167. [ 0.604574] usbcore: registered new interface driver usb-storage
  168. [ 0.604583] USB Mass Storage support registered.
  169. [ 0.604653] usbcore: registered new interface driver libusual
  170. [ 0.604720] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  171. [ 0.604813] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
  172. [ 0.604930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  173. [ 0.604945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  174. [ 0.604958] usb usb1: Product: MUSB HDRC host driver
  175. [ 0.604969] usb usb1: Manufacturer: Linux 3.1.0+ musb-hcd
  176. [ 0.604980] usb usb1: SerialNumber: musb-hdrc.1
  177. [ 0.605593] hub 1-0:1.0: USB hub found
  178. [ 0.605618] hub 1-0:1.0: 1 port detected
  179. [ 0.606308] mousedev: PS/2 mouse device common for all mice
  180. [ 0.606771] dev addr = c0453818
  181. [ 0.606781] pdev addr = c0453810
  182. [ 0.607317] omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
  183. [ 0.607463] i2c /dev entries driver
  184. [ 0.607834] Linux media interface: v0.10
  185. [ 0.607973] lirc_dev: IR Remote Control driver registered, major 249
  186. [ 0.607986] IR NEC protocol handler initialized
  187. [ 0.607995] IR RC5(x) protocol handler initialized
  188. [ 0.608004] IR RC6 protocol handler initialized
  189. [ 0.608013] IR JVC protocol handler initialized
  190. [ 0.608022] IR Sony protocol handler initialized
  191. [ 0.608031] IR RC5 (streamzap) protocol handler initialized
  192. [ 0.608040] IR MCE Keyboard/mouse protocol handler initialized
  193. [ 0.608050] IR LIRC bridge handler initialized
  194. [ 0.608058] Linux video capture interface: v2.00
  195. [ 0.608193] usbcore: registered new interface driver uvcvideo
  196. [ 0.608204] USB Video Class driver (1.1.1)
  197. [ 0.608265] Driver for 1-wire Dallas network protocol.
  198. [ 0.609029] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  199. [ 0.609901] Registered led device: beaglebone::usr0
  200. [ 0.609999] Registered led device: beaglebone::usr1
  201. [ 0.610088] Registered led device: beaglebone::usr2
  202. [ 0.610185] Registered led device: beaglebone::usr3
  203. [ 0.610529] usbcore: registered new interface driver usbhid
  204. [ 0.610540] usbhid: USB HID core driver
  205. [ 0.611004] usbcore: registered new interface driver snd-usb-audio
  206. [ 0.611415] ALSA device list:
  207. [ 0.611425] No soundcards found.
  208. [ 0.611798] TCP cubic registered
  209. [ 0.611809] Initializing XFRM netlink socket
  210. [ 0.611830] NET: Registered protocol family 17
  211. [ 0.611883] NET: Registered protocol family 15
  212. [ 0.611924] Registering the dns_resolver key type
  213. [ 0.611971] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  214. [ 0.611992] ThumbEE CPU extension supported.
  215. [ 0.612841] omap2_set_init_voltage: unable to get clk dpll1_ck
  216. [ 0.618928] omap2_set_init_voltage: unable to set vdd_mpu_iva
  217. [ 0.624957] omap2_set_init_voltage: unable to get clk l3_ick
  218. [ 0.630857] omap2_set_init_voltage: unable to set vdd_core
  219. [ 0.640479] registered taskstats version 1
  220. [ 0.640741] Detected MACID=40:5f:c2:76:55:df
  221. [ 0.641456] omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  222. [ 0.641951] Waiting for root device /dev/mmcblk0p2...
  223. [ 0.693447] mmc0: host does not support reading read-only switch. assuming write-enable.
  224. [ 0.695379] mmc0: new high speed SDHC card at address 1234
  225. [ 0.695872] mmcblk0: mmc0:1234 SA04G 3.63 GiB
  226. [ 0.697448] mmcblk0: p1 p2
  227. [ 0.755193] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  228. [ 0.755212] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  229. [ 1.052630] usb 1-1: new high speed USB device number 2 using musb-hdrc
  230. [ 1.193609] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
  231. [ 1.193626] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  232. [ 1.193639] usb 1-1: Product: USB2.0 Hub
  233. [ 1.194509] hub 1-1:1.0: USB hub found
  234. [ 1.194805] hub 1-1:1.0: 4 ports detected
  235. [ 1.472659] usb 1-1.4: new high speed USB device number 3 using musb-hdrc
  236. [ 1.573671] usb 1-1.4: New USB device found, idVendor=0846, idProduct=9041
  237. [ 1.573688] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  238. [ 1.573701] usb 1-1.4: Product: 802.11n WLAN Adapter
  239. [ 1.573712] usb 1-1.4: Manufacturer: Realtek
  240. [ 1.573722] usb 1-1.4: SerialNumber: 00e04c000001
  241. [ 26.559118] EXT4-fs (mmcblk0p2): recovery complete
  242. [ 26.567653] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  243. [ 26.567721] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  244. [ 26.569835] devtmpfs: mounted
  245. [ 26.570143] Freeing init memory: 208K
  246. [ 26.933124] NET: Registered protocol family 10
  247. [ 27.565437] udevd[62]: starting version 180
  248. [ 27.891245] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  249. [ 29.501323]
  250. [ 29.501331] CPSW phy found : id is : 0x7c0f1
  251. [ 29.508149] PHY 0:01 not found
  252. [ 29.518428] ADDRCONF(NETDEV_UP): eth0: link is not ready
  253. [ 31.730740] gadget: Mass Storage Function, version: 2009/09/11
  254. [ 31.730761] gadget: Number of LUNs=1
  255. [ 31.730785] lun0: LUN: removable file: /dev/mmcblk0p1
  256. [ 31.730829] gadget: Mass Storage Gadget, version: 2009/09/11
  257. [ 31.730847] gadget: userspace failed to provide iSerialNumber
  258. [ 31.730875] gadget: g_mass_storage ready
  259. [ 31.730907] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  260. [ 31.730976] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
  261. [ 31.731087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  262. [ 31.731102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  263. [ 31.731116] usb usb2: Product: MUSB HDRC host driver
  264. [ 31.731127] usb usb2: Manufacturer: Linux 3.1.0+ musb-hcd
  265. [ 31.731137] usb usb2: SerialNumber: musb-hdrc.0
  266. [ 31.731836] hub 2-0:1.0: USB hub found
  267. [ 31.731862] hub 2-0:1.0: 1 port detected
  268. [ 32.096198] cfg80211: Calling CRDA to update world regulatory domain
  269. [ 32.493157] PHY: 0:00 - Link is Up - 100/Full
  270. [ 32.493348] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  271. [ 33.016149] rtl8192cu: MAC address: c4:3d:c7:7f:60:af
  272. [ 33.016185] rtl8192cu: Board Type 0
  273. [ 33.727103] rtl8192cu:rtl92cu_init_sw_vars():<0-0> Failed to request firmware!
  274. [ 33.727126] rtlwifi:rtl_usb_probe():<0-0> Can't init_sw_vars.
  275. [ 33.727276] usbcore: registered new interface driver rtl8192cu
  276. [ 43.492452] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!