API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 25th, 2016
517
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.58 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. U-Boot 2015.04-04656-g6e465ba-dirty (Jun 26 2015 - 12:46:48)
  4.  
  5. CPU0: P2020E, Version: 2.1, (0x80ea0021)
  6. Core: e500, Version: 5.1, (0x80211051)
  7. Clock Configuration:
  8. CPU0:1200 MHz, CPU1:1200 MHz,
  9. CCB:600 MHz,
  10. DDR:400 MHz (800 MT/s data rate) (Asynchronous), LBC:37.500 MHz
  11. L1: D-cache 32 KiB enabled
  12. I-cache 32 KiB enabled
  13. wdt status 00000005 reset
  14. Watchdog enabled
  15. Board: TURRIS CPLD: V4.1 PCBA: V4.0
  16. Error, wrong i2c adapter 2 max 2 possible
  17. in: 56
  18. out: 0
  19. io_config: 255
  20. rom_loc: nor upper bank
  21. SD/MMC : 4-bit Mode
  22. eSPI : Enabled
  23. I2C: Error, wrong i2c adapter 2 max 2 possible
  24. ready
  25. SPI: ready
  26. DRAM: Error, wrong i2c adapter 2 max 2 possible
  27. Detected UDIMM 9905428-181.A00LF
  28. 2 GiB (DDR3, 64-bit, CL=6, ECC off)
  29. Flash: 16 MiB
  30. L2: 512 KiB enabled
  31. NAND: 256 MiB
  32. MMC: FSL_SDHC: 0
  33. *** Warning - bad CRC, using default environment
  34.  
  35. PCIe1: Root Complex of mini PCIe SLOT, no link, regs @ 0xffe0a000
  36. PCIe1: Bus 00 - 00
  37. PCIe2: Root Complex of PCIe SLOT, x1 gen1, regs @ 0xffe09000
  38. 02:00.0 - 168c:0030 - Network controller
  39. PCIe2: Bus 01 - 02
  40. PCIe3: Root Complex of PCIe SLOT, no link, regs @ 0xffe08000
  41. PCIe3: Bus 03 - 03
  42. Error, wrong i2c adapter 2 max 2 possible
  43. In: serial
  44. Out: serial
  45. Err: serial
  46. Net: Phy 5 not found
  47. PHY reset timed out
  48. eTSEC1
  49. Error: eTSEC1 address not set.
  50. , eTSEC2
  51. Error: eTSEC2 address not set.
  52. , eTSEC3 [PRIME]
  53. Error: eTSEC3 address not set.
  54.  
  55. Hit any key to stop autoboot: 0
  56. BOOT NAND
  57. wdt status 00000003
  58.  
  59. NAND read: device 0 offset 0x0, size 0x200000
  60. 2097152 bytes read: OK
  61.  
  62. Loading from nand0, offset 0x200000
  63. Image Name: Linux-3.18.32-cc6b438bc31718a6d7
  64. Created: 2016-05-13 8:21:07 UTC
  65. Image Type: PowerPC Linux Kernel Image (gzip compressed)
  66. Data Size: 2452954 Bytes = 2.3 MiB
  67. Load Address: 00000000
  68. Entry Point: 00000000
  69. WARNING: adjusting available memory to 30000000
  70. ## Booting kernel from Legacy Image at 02200000 ...
  71. Image Name: Linux-3.18.32-cc6b438bc31718a6d7
  72. Created: 2016-05-13 8:21:07 UTC
  73. Image Type: PowerPC Linux Kernel Image (gzip compressed)
  74. Data Size: 2452954 Bytes = 2.3 MiB
  75. Load Address: 00000000
  76. Entry Point: 00000000
  77. Verifying Checksum ... OK
  78. ## Flattened Device Tree blob at 02000000
  79. Booting using the fdt blob at 0x2000000
  80. Uncompressing Kernel Image ... OK
  81. Loading Device Tree to 03ff9000, end 03fff25f ... OK
  82. WARNING: could not find compatible node fsl-usb2-dr
  83. [ 0.000000] Using P2020 RDB machine description
  84. [ 0.000000] Memory CAM mapping: 256/256 Mb, residual: 1536Mb
  85. [ 0.000000] Initializing cgroup subsys cpuset
  86. [ 0.000000] Initializing cgroup subsys cpu
  87. [ 0.000000] Initializing cgroup subsys cpuacct
  88. [ 0.000000] Linux version 3.18.32-cc6b438bc31718a6d78da01fb8369384-1 (beast@build) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49274) ) #1 SMP Fri May 13 10:21:01 CEST 2016
  89. [ 0.000000] CPU maps initialized for 1 thread per core
  90. [ 0.000000] bootconsole [udbg0] enabled
  91. setup_arch: bootmem
  92. mpc85xx_rdb_setup_arch()
  93. [ 0.000000] mpc85xx_qe_init: Could not find Quicc Engine node
  94. [ 0.000000] MPC85xx RDB board from Freescale Semiconductor
  95. arch: exit
  96. [ 0.000000] Zone ranges:
  97. [ 0.000000] DMA [mem 0x00000000-0x1fffffff]
  98. [ 0.000000] Normal empty
  99. [ 0.000000] HighMem [mem 0x20000000-0x7fffffff]
  100. [ 0.000000] Movable zone start for each node
  101. [ 0.000000] Early memory node ranges
  102. [ 0.000000] node 0: [mem 0x00000000-0x7fffffff]
  103. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff]
  104. [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
  105. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c151a000 s6656 r8192 d22016 u36864
  106. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523264
  107. [ 0.000000] Kernel command line: root=/dev/mtdblock8 rw rootfstype=jffs2 console=ttyS0,115200
  108. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  109. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  110. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  111. [ 0.000000] Sorting __ex_table...
  112. [ 0.000000] allocated 4194304 bytes of page_cgroup
  113. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  114. [ 0.000000] Memory: 2004884K/2097152K available (3732K kernel code, 184K rwdata, 816K rodata, 188K init, 243K bss, 92268K reserved, 1572856K highmem)
  115. [ 0.000000] Kernel virtual memory layout:
  116. [ 0.000000] * 0xfffbf000..0xfffff000 : fixmap
  117. [ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
  118. [ 0.000000] * 0xffbfd000..0xffc00000 : early ioremap
  119. [ 0.000000] * 0xe1000000..0xffbfd000 : vmalloc & ioremap
  120. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  121. [ 0.000000] Hierarchical RCU implementation.
  122. [ 0.000000] NR_IRQS:512 nr_irqs:512 16
  123. [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 2 CPUs
  124. [ 0.000000] mpic: ISU size: 256, shift: 8, mask: ff
  125. [ 0.000000] mpic: Initializing for 256 sources
  126. [ 0.000000] mpc85xx_rdb_pic_init: Could not find qe-ic node
  127. [ 0.000007] clocksource: timebase mult[d555555] shift[24] registered
  128. [ 0.006307] pid_max: default: 32768 minimum: 301
  129. [ 0.010969] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  130. [ 0.017504] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  131. [ 0.024930] Initializing cgroup subsys memory
  132. [ 0.029222] Initializing cgroup subsys devices
  133. [ 0.033642] Initializing cgroup subsys freezer
  134. [ 0.038075] Initializing cgroup subsys net_cls
  135. [ 0.042507] Initializing cgroup subsys blkio
  136. [ 0.046891] mpic: requesting IPIs...
  137. [ 0.051292] Brought up 2 CPUs
  138. [ 0.056584] NET: Registered protocol family 16
  139. [ 0.072976] cpuidle: using governor ladder
  140.  
  141. [ 0.082367] Found FSL PCI host bridge at 0x00000000ffe08000. Firmware bus number: 0->0
  142. [ 0.090211] PCI host bridge /pcie@ffe08000 (primary) ranges:
  143. [ 0.095860] MEM 0x00000000c0000000..0x00000000dfffffff -> 0x00000000c0000000
  144. [ 0.103072] IO 0x00000000ffc20000..0x00000000ffc2ffff -> 0x0000000000000000
  145. [ 0.110208] /pcie@ffe08000: PCICSRBAR @ 0xfff00000
  146. [ 0.115196] Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->1
  147. [ 0.123034] PCI host bridge /pcie@ffe09000 ranges:
  148. [ 0.127902] MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
  149. [ 0.135116] IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000
  150. [ 0.142251] /pcie@ffe09000: PCICSRBAR @ 0xfff00000
  151. [ 0.147240] Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->0
  152. [ 0.155077] PCI host bridge /pcie@ffe0a000 ranges:
  153. [ 0.159946] MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000
  154. [ 0.167159] IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000
  155. [ 0.174295] /pcie@ffe0a000: PCICSRBAR @ 0xfff00000
  156. [ 0.187797] PCI: Probing PCI hardware
  157. [ 0.191490] fsl-pci ffe08000.pcie: PCI host bridge to bus 0000:00
  158. [ 0.197510] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  159. [ 0.203675] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
  160. [ 0.210543] pci_bus 0000:00: root bus resource [bus 00-ff]
  161. [ 0.216303] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  162. [ 0.224310] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  163. [ 0.229625] fsl-pci ffe09000.pcie: PCI host bridge to bus 0001:02
  164. [ 0.235643] pci_bus 0001:02: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
  165. [ 0.244591] pci_bus 0001:02: root bus resource [mem 0xa0000000-0xbfffffff]
  166. [ 0.251459] pci_bus 0001:02: root bus resource [bus 02-ff]
  167. [ 0.257168] pci 0001:02:00.0: Primary bus is hard wired to 0
  168. [ 0.262748] pci 0001:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
  169. [ 0.278771] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
  170. [ 0.284101] fsl-pci ffe0a000.pcie: PCI host bridge to bus 0002:04
  171. [ 0.290119] pci_bus 0002:04: root bus resource [io 0x40000-0x4ffff] (bus address [0x0000-0xffff])
  172. [ 0.299077] pci_bus 0002:04: root bus resource [mem 0x80000000-0x9fffffff]
  173. [ 0.305937] pci_bus 0002:04: root bus resource [bus 04-ff]
  174. [ 0.311656] pci 0002:04:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  175. [ 0.319661] pci 0002:04:00.0: PCI bridge to [bus 05-ff]
  176. [ 0.324893] PCI: Cannot allocate resource region 0 of PCI bridge 1, will remap
  177. [ 0.332042] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
  178. [ 0.339859] PCI: Cannot allocate resource region 0 of device 0001:02:00.0, will remap
  179. [ 0.347685] PCI: Cannot allocate resource region 0 of device 0002:04:00.0, will remap
  180. [ 0.355540] pci 0000:00:00.0: BAR 0: no space for [mem size 0x00100000]
  181. [ 0.362115] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x00100000]
  182. [ 0.369069] pci 0000:00:00.0: PCI bridge to [bus 01]
  183. [ 0.374024] pci 0000:00:00.0: bridge window [mem 0xc0000000-0xdfffffff]
  184. [ 0.380808] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
  185. [ 0.389876] pci 0001:02:00.0: BAR 0: no space for [mem size 0x00100000]
  186. [ 0.396453] pci 0001:02:00.0: BAR 0: failed to assign [mem size 0x00100000]
  187. [ 0.403410] pci 0001:03:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref]
  188. [ 0.410623] pci 0001:02:00.0: PCI bridge to [bus 03]
  189. [ 0.415578] pci 0001:02:00.0: bridge window [io 0x20000-0x2ffff]
  190. [ 0.421837] pci 0001:02:00.0: bridge window [mem 0xa0000000-0xbfffffff]
  191. [ 0.428618] pci_bus 0001:02: Some PCI device resources are unassigned, try booting with pci=realloc
  192. [ 0.437696] pci 0002:04:00.0: BAR 0: no space for [mem size 0x00100000]
  193. [ 0.444266] pci 0002:04:00.0: BAR 0: failed to assign [mem size 0x00100000]
  194. [ 0.451219] pci 0002:04:00.0: PCI bridge to [bus 05]
  195. [ 0.456175] pci 0002:04:00.0: bridge window [io 0x40000-0x4ffff]
  196. [ 0.462435] pci 0002:04:00.0: bridge window [mem 0x80000000-0x9fffffff]
  197. [ 0.469216] pci_bus 0002:04: Some PCI device resources are unassigned, try booting with pci=realloc
  198. [ 0.478523] mpic-msgr ffe41400.message: Found 0 message registers
  199. [ 0.484539] mpic-msgr ffe41400.message: Of-device full name /soc@ffe00000/message@41400
  200. [ 0.492541] mpic-msgr ffe41400.message: Failed to find message register block alias
  201. [ 0.513643] Switched to clocksource timebase
  202. [ 0.518549] NET: Registered protocol family 2
  203. [ 0.523345] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  204. [ 0.530344] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  205. [ 0.536788] TCP: Hash tables configured (established 4096 bind 4096)
  206. [ 0.543150] TCP: reno registered
  207. [ 0.546313] UDP hash table entries: 256 (order: 1, 8192 bytes)
  208. [ 0.552145] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  209. [ 0.558506] NET: Registered protocol family 1
  210. [ 0.563946] futex hash table entries: 512 (order: 2, 16384 bytes)
  211. [ 0.575031] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  212. [ 0.580854] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  213. [ 0.590900] msgmni has been set to 972
  214. [ 0.595197] bounce: pool size: 64 pages
  215. [ 0.599007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  216. [ 0.606346] io scheduler noop registered
  217. [ 0.610253] io scheduler deadline registered (default)
  218. [ 0.615643] pcieport 0001:02:00.0: enabling device (0106 -> 0107)
  219. [ 0.621768] pcieport 0002:04:00.0: enabling device (0106 -> 0107)
  220. [ 0.648549] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  221. [ 0.656873] console [ttyS0] disabled
  222. [ 0.660395] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud = 37500000) is a 16550A
  223. [ 0.669072] console [ttyS0] enabled
  224. [ 0.669072] console [ttyS0] enabled
  225. [ 0.676021] bootconsole [udbg0] disabled
  226. [ 0.676021] bootconsole [udbg0] disabled
  227. [ 0.684189] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 37500000) is a 16550A
  228. [ 0.693380] console [ttyS0] disabled
  229. [ 0.696989] console [ttyS0] enabled
  230. [ 0.700844] ffe04600.serial: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 37500000) is a 16550
  231. [ 0.710778] ef000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
  232. [ 0.720799] Amd/Fujitsu Extended Query Table at 0x0040
  233. [ 0.725965] Amd/Fujitsu Extended Query version 1.3.
  234. [ 0.731021] number of CFI chips: 1
  235. [ 0.734715] 6 ofpart partitions found on MTD device ef000000.nor
  236. [ 0.740742] Creating 6 MTD partitions on "ef000000.nor":
  237. [ 0.746061] 0x000000000000-0x000000020000 : "NOR (RO) DTB Image"
  238. [ 0.752508] 0x000000020000-0x0000001c0000 : "NOR (RO) Linux Kernel Image"
  239. [ 0.759676] 0x0000001c0000-0x000000340000 : "NOR (RO) JFFS2 Root File System"
  240. [ 0.767208] 0x000000340000-0x000000e40000 : "NOR (RO) NAND FW backup"
  241. [ 0.774030] 0x000000e40000-0x000000f00000 : "NOR (RW) Cert backup"
  242. [ 0.780594] 0x000000f00000-0x000001000000 : "NOR (RO) U-Boot Image"
  243. [ 0.787739] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  244. [ 0.794109] nand: Micron MT29F2G08ABAEAWP
  245. [ 0.798139] nand: 256MiB, SLC, page size: 2048, OOB size: 64
  246. [ 0.803818] nand: WARNING: ff800000.flash: the ECC used on your system is too weak compared to the one required by the NAND chip
  247. [ 0.818049] Bad block table found at page 131008, version 0x01
  248. [ 0.824604] Bad block table found at page 130944, version 0x01
  249. [ 0.831187] 4 ofpart partitions found on MTD device ff800000.flash
  250. [ 0.837444] Creating 4 MTD partitions on "ff800000.flash":
  251. [ 0.842947] 0x000000000000-0x000000200000 : "NAND (RW) DTB Image"
  252. [ 0.849547] 0x000000200000-0x000000700000 : "NAND (RW) Linux Kernel Image"
  253. [ 0.856861] 0x000000700000-0x000010000000 : "NAND (RW) JFFS2 Root File System"
  254. [ 0.864710] 0x000000000000-0x000010000000 : "rootfs-ubifs"
  255. [ 0.870824] eLBC NAND device at 0xff800000, bank 1
  256. [ 0.876008] fsl_espi ffe07000.spi: cs=0, init_csmode=0x100008
  257. [ 0.881781] fsl_espi ffe07000.spi: cs=1, init_csmode=0x100008
  258. [ 0.887537] fsl_espi ffe07000.spi: cs=2, init_csmode=0x100008
  259. [ 0.893291] fsl_espi ffe07000.spi: cs=3, init_csmode=0x100008
  260. [ 0.899100] fsl_espi ffe07000.spi: master is unqueued, this is deprecated
  261. [ 0.906704] fsl_espi ffe07000.spi: at 0xe10da000 (irq = 59)
  262. [ 0.912649] libphy: Fixed MDIO Bus: probed
  263. [ 0.916935] libphy: Freescale PowerQUICC MII Bus: probed
  264. [ 0.924757] switch0: Atheros AR8337 rev. 2 switch registered on mdio@ffe24520
  265. [ 0.975776] fsl-gianfar ffe24000.ethernet: enabled errata workarounds, flags: 0x4
  266. [ 0.993681] fsl-gianfar ffe24000.ethernet eth0: mac: 00:00:00:00:00:00
  267. [ 1.000220] fsl-gianfar ffe24000.ethernet eth0: Running with NAPI enabled
  268. [ 1.007017] fsl-gianfar ffe24000.ethernet eth0: RX BD ring size for Q[0]: 256
  269. [ 1.014162] fsl-gianfar ffe24000.ethernet eth0: TX BD ring size for Q[0]: 256
  270. [ 1.021553] fsl-gianfar ffe25000.ethernet: enabled errata workarounds, flags: 0x4
  271. [ 1.039402] fsl-gianfar ffe25000.ethernet eth1: mac: 00:00:00:00:00:00
  272. [ 1.045944] fsl-gianfar ffe25000.ethernet eth1: Running with NAPI enabled
  273. [ 1.052740] fsl-gianfar ffe25000.ethernet eth1: RX BD ring size for Q[0]: 256
  274. [ 1.059885] fsl-gianfar ffe25000.ethernet eth1: TX BD ring size for Q[0]: 256
  275. [ 1.067090] fsl-gianfar ffe26000.ethernet: enabled errata workarounds, flags: 0x4
  276. [ 1.084950] fsl-gianfar ffe26000.ethernet eth2: mac: 00:00:00:00:00:00
  277. [ 1.091496] fsl-gianfar ffe26000.ethernet eth2: Running with NAPI enabled
  278. [ 1.098294] fsl-gianfar ffe26000.ethernet eth2: RX BD ring size for Q[0]: 256
  279. [ 1.105438] fsl-gianfar ffe26000.ethernet eth2: TX BD ring size for Q[0]: 256
  280. [ 1.112662] ucc_geth_driver: QE UCC Gigabit Ethernet Controller
  281. [ 1.118794] i2c /dev entries driver
  282. [ 1.122413] mpc-i2c ffe03000.i2c: timeout 1000000 us
  283. [ 1.129988] rtc-ds1307 0-006f: rtc core: registered mcp7940x as rtc0
  284. [ 1.136369] rtc-ds1307 0-006f: 64 bytes nvram
  285. [ 1.140987] mpc-i2c ffe03100.i2c: timeout 1000000 us
  286. [ 1.146211] booke_wdt: powerpc book-e watchdog driver loaded
  287. [ 1.152188] TCP: cubic registered
  288. [ 1.155841] NET: Registered protocol family 10
  289. [ 1.160976] NET: Registered protocol family 17
  290. [ 1.165474] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  291. [ 1.178129] Bridge firewalling registered
  292. [ 1.182150] 8021q: 802.1Q VLAN Support v1.8
  293. [ 1.188395] rtc-ds1307 0-006f: setting system clock to 2016-05-25 14:44:28 UTC (1464187468)
  294. [ 2.325152] random: nonblocking pool is initialized
  295. [ 3.201679] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  296. [ 3.224226] VFS: Mounted root (jffs2 filesystem) on device 31:8.
  297. [ 3.230461] Freeing unused kernel memory: 188K (c0474000 - c04a3000)
  298. [ 3.980923] init: Console is alive
  299. [ 3.984449] init: - watchdog -
  300. [ 8.804304] usbcore: registered new interface driver usbfs
  301. [ 8.809851] usbcore: registered new interface driver hub
  302. [ 8.815216] usbcore: registered new device driver usb
  303. [ 8.822526] Button Hotplug driver version 0.4.1
  304. [ 8.893888] raid6: int32x1 170 MB/s
  305. [ 8.965796] raid6: int32x2 297 MB/s
  306. [ 9.033736] raid6: int32x4 407 MB/s
  307. [ 9.101664] raid6: int32x8 374 MB/s
  308. [ 9.105409] raid6: using algorithm int32x4 (407 MB/s)
  309. [ 9.110462] raid6: using intx1 recovery algorithm
  310. [ 9.115506] xor: measuring software checksum speed
  311. [ 9.157635] 8regs : 1464.000 MB/sec
  312. [ 9.201637] 8regs_prefetch: 1299.000 MB/sec
  313. [ 9.245634] 32regs : 1458.000 MB/sec
  314. [ 9.289634] 32regs_prefetch: 1345.000 MB/sec
  315. [ 9.294260] xor: using function: 8regs (1464.000 MB/sec)
  316. [ 9.615022] Btrfs loaded
  317. [ 9.699446] JFS: nTxBlock = 8192, nTxLock = 65536
  318. [ 9.848652] SGI XFS with security attributes, no debug enabled
  319. [ 9.864909] SCSI subsystem initialized
  320. [ 9.872044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  321. [ 9.878676] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  322. [ 9.885349] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  323. [ 9.892658] fsl-ehci fsl-ehci.0: irq 28, io mem 0xffe22000
  324. [ 9.909652] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  325. [ 9.915634] hub 1-0:1.0: USB hub found
  326. [ 9.919421] hub 1-0:1.0: 1 port detected
  327. [ 9.924211] ehci-platform: EHCI generic platform driver
  328. [ 9.931210] uhci_hcd: USB Universal Host Controller Interface driver
  329. [ 9.947717] sdhci: Secure Digital Host Controller Interface driver
  330. [ 9.953925] sdhci: Copyright(c) Pierre Ossman
  331. [ 9.958729] sdhci-pltfm: SDHCI platform and OF driver helper
  332. [ 9.964863] /soc@ffe00000/sdhc@2e000: voltage-ranges unspecified
  333. [ 9.970896] sdhci-esdhc ffe2e000.sdhc: No vmmc regulator found
  334. [ 9.976741] sdhci-esdhc ffe2e000.sdhc: No vqmmc regulator found
  335. [ 10.013658] mmc0: SDHCI controller on ffe2e000.sdhc [ffe2e000.sdhc] using DMA
  336. [ 10.026357] usbcore: registered new interface driver usb-storage
  337. [ 10.233652] usb 1-1: new high-speed USB device number 2 using fsl-ehci
  338. [ 10.370515] hub 1-1:1.0: USB hub found
  339. [ 10.374412] hub 1-1:1.0: 2 ports detected
  340. [ 10.993937] init: - preinit -
  341. ifconfig: SIOCSIFFLAGS: Cannot assign requested address
  342. sendto(): Network is unreachable
  343. Press the [f] key and hit [enter] to enter failsafe mode
  344. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  345. [ 15.480787] mount_root: mounting /dev/root
  346. [ 15.492326] mount_root: loading kmods from internal overlay
  347. [ 15.808504] block: attempting to load /etc/config/fstab
  348. [ 15.834001] block: extroot: not configured
  349. ifconfig: SIOCSIFFLAGS: Cannot assi[ 15.845369] procd: - early -
  350. gn[ 15.848470] procd: - watchdog -
  351. requested address
  352. Failed to connect to ubus
  353. [ 16.476908] procd: - ubus -
  354. [ 17.499690] procd: - init -
  355. Please press Enter to activate this console.
  356. [ 17.724544] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  357. [ 17.734187] Netfilter messages via NETLINK v0.30.
  358. [ 17.747567] md: linear personality registered for level -1
  359. [ 17.754362] md: raid0 personality registered for level 0
  360. [ 17.761408] md: raid1 personality registered for level 1
  361. [ 17.768420] md: raid10 personality registered for level 10
  362. [ 17.778298] md: raid6 personality registered for level 6
  363. [ 17.783663] md: raid5 personality registered for level 5
  364. [ 17.788984] md: raid4 personality registered for level 4
  365. [ 17.798248] FS-Cache: Loaded
  366. [ 17.802215] md: multipath personality registered for level -4
  367. [ 17.811820] NET: Registered protocol family 8
  368. [ 17.816214] NET: Registered protocol family 20
  369. [ 17.822404] Key type dns_resolver registered
  370. [ 17.831526] NET: Registered protocol family 33
  371. [ 17.836012] Key type rxrpc registered
  372. [ 17.839678] Key type rxrpc_s registered
  373. [ 17.847564] kAFS: Red Hat AFS client v0.1 registering.
  374. [ 17.852788] FS-Cache: Netfs 'afs' registered for caching
  375. [ 17.905339] RPC: Registered named UNIX socket transport module.
  376. [ 17.911291] RPC: Registered udp transport module.
  377. [ 17.915999] RPC: Registered tcp transport module.
  378. [ 17.920706] RPC: Registered tcp NFSv4.1 backchannel transport module.
  379. [ 17.945143] ntfs: driver 2.1.31 [Flags: R/O MODULE].
  380. [ 17.959346] RxRPC: Registered security type 2 'rxkad'
  381. [ 17.983100] tun: Universal TUN/TAP device driver, 1.6
  382. [ 17.988197] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  383. [ 18.004525] sit: IPv6 over IPv4 tunneling driver
  384. [ 18.010982] gre: GRE over IPv4 demultiplexor driver
  385. [ 18.016596] ip_gre: GRE over IPv4 tunneling driver
  386. [ 18.038479] Installing knfsd (copyright (C) 1996 [email protected]).
  387. [ 18.047716] PPP generic driver version 2.4.2
  388. [ 18.054570] ip6_tables: (C) 2000-2006 Netfilter Core Team
  389. [ 18.067870] ip_set: protocol 6
  390. [ 18.087392] u32 classifier
  391. [ 18.090120] input device check on
  392. [ 18.093785] Actions configured
  393. [ 18.098220] Mirror/redirect action on
  394. [ 18.109477] netem: version 1.3
  395. [ 18.120608] fuse init (API version 7.23)
  396. [ 18.144459] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
  397. [ 18.152406] Backport generated by backports.git backports-20151120-0-g906a6b3
  398. [ 18.163827] ip_tables: (C) 2000-2006 Netfilter Core Team
  399. [ 18.175742] ctnetlink v0.93: registering with nfnetlink.
  400. [ 18.215930] nfnl_acct: registering with nfnetlink.
  401. [ 18.222445] PPP MPPE Compression module registered
  402. [ 18.228258] NET: Registered protocol family 24
  403. [ 18.235512] usbcore: registered new interface driver ums-alauda
  404. [ 18.242878] usbcore: registered new interface driver ums-cypress
  405. [ 18.250678] usbcore: registered new interface driver ums-datafab
  406. [ 18.257848] usbcore: registered new interface driver ums-freecom
  407. [ 18.265332] usbcore: registered new interface driver ums-isd200
  408. [ 18.273025] usbcore: registered new interface driver ums-jumpshot
  409. [ 18.280443] usbcore: registered new interface driver ums-karma
  410. [ 18.288305] usbcore: registered new interface driver ums-sddr09
  411. [ 18.295680] usbcore: registered new interface driver ums-sddr55
  412. [ 18.307353] usbcore: registered new interface driver ums-usbat
  413. [ 18.322559] usbcore: registered new interface driver usbserial
  414. [ 18.328475] usbcore: registered new interface driver usbserial_generic
  415. [ 18.335094] usbserial: USB Serial support registered for generic
  416. [ 18.356093] xt_time: kernel timezone is -0000
  417. [ 18.362070] usbcore: registered new interface driver cdc_ether
  418. [ 18.394668] cfg80211: World regulatory domain updated:
  419. [ 18.399835] cfg80211: DFS Master region: unset
  420. [ 18.404207] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  421. [ 18.413970] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  422. [ 18.421994] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  423. [ 18.430018] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  424. [ 18.438054] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  425. [ 18.447571] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  426. [ 18.457069] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  427. [ 18.465172] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  428. [ 18.473196] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  429. [ 18.482502] usbcore: registered new interface driver ftdi_sio
  430. [ 18.488338] usbserial: USB Serial support registered for FTDI USB Serial Device
  431. [ 18.577660] usbcore: registered new interface driver rndis_host
  432. [ 18.621620] usbcore: registered new interface driver option
  433. [ 18.627289] usbserial: USB Serial support registered for GSM modem (1-port)
  434. [ 18.768105] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xe6200000, irq=27
  435. [ 18.775010] cfg80211: Regulatory domain changed to country: US
  436. [ 18.780875] cfg80211: DFS Master region: FCC
  437. [ 18.785061] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  438. [ 18.794831] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  439. [ 18.802853] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  440. [ 18.812346] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  441. [ 18.821840] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
  442. [ 18.829942] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  443. [ 18.837956] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  444. [ 27.489795] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  445. [ 27.513782] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  446. [ 27.537788] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
  447. [ 29.167529] device eth1 entered promiscuous mode
  448. [ 29.173150] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  449. [ 29.184202] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
  450. [ 29.193230] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  451. [ 29.744748] cfg80211: Regulatory domain changed to country: CZ
  452. [ 29.750623] cfg80211: DFS Master region: ETSI
  453. [ 29.754899] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  454. [ 29.764656] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  455. [ 29.772680] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  456. [ 29.782174] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  457. [ 29.791665] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
  458. [ 29.799766] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  459. May 25 16:44:57 ucollect[4525]: Installing plugin Badconf with api version 0
  460.  
  461. May 25 16:44:57 ucollect[4525]: Loading plugin library libplugin_ucollect_bandwidth_20.so
  462.  
  463. May 25 16:44:57 ucollect[4525]: Installing plugin Bandwidth with api version 0
  464.  
  465. May 25 16:44:57 ucollect[4525]: Loading plugin library libplugin_ucollect_buckets_33.so
  466.  
  467. May 25 16:44:58 ucollect[4525]: Installing plugin Buckets with api version 0
  468.  
  469. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_count_27.so
  470.  
  471. May 25 16:44:58 ucollect[4525]: Installing plugin Count with api version 0
  472.  
  473. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_fake_15.so
  474.  
  475. May 25 16:44:58 ucollect[4525]: Installing plugin Fake with api version 0
  476.  
  477. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_flow_29.so
  478.  
  479. May 25 16:44:58 ucollect[4525]: Installing plugin Flow with api version 2
  480.  
  481. May 25 16:44:58 ucollect[4525]: Loading plugin library libpluglib_ucollect_diffstore_1.2.so
  482.  
  483. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_fwup_7.so
  484.  
  485. May 25 16:44:58 ucollect[4525]: Installing plugin Fwup with api version 2
  486.  
  487. May 25 16:44:58 ucollect[4525]: Loading plugin library libpluglib_ucollect_diffstore_1.2.so
  488.  
  489. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_refused_12.so
  490.  
  491. May 25 16:44:58 ucollect[4525]: Installing plugin Refused with api version 0
  492.  
  493. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_sniff_16.so
  494.  
  495. May 25 16:44:58 ucollect[4525]: Installing plugin Sniff with api version 0
  496.  
  497. May 25 16:44:58 ucollect[4525]: Loading plugin library libplugin_ucollect_spoof_8.so
  498.  
  499. May 25 16:44:58 ucollect[4525]: Installing plugin Spoof with api version 0
  500.  
  501. May 25 16:44:58 ucollect[4525]: Changing remote uplink address to api.turris.cz:5679
  502.  
  503. [ 31.165871] fsl-gianfar ffe25000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  504. [ 31.174446] br-lan: port 1(eth1) entered forwarding state
  505. [ 31.179882] br-lan: port 1(eth1) entered forwarding state
  506. [ 31.185481] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  507. [ 31.185832] fsl-gianfar ffe26000.ethernet eth2: Link is Down
  508. [ 31.192134] fsl-gianfar ffe24000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  509. [ 31.207207] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  510. [ 31.541069] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  511. [ 31.548617] device wlan0 entered promiscuous mode
  512. [ 31.553418] br-lan: port 2(wlan0) entered forwarding state
  513. [ 31.558929] br-lan: port 2(wlan0) entered forwarding state
  514. [ 32.173838] br-lan: port 2(wlan0) entered disabled state
  515. [ 33.181670] br-lan: port 1(eth1) entered forwarding state
  516. [ 33.187486] fsl-gianfar ffe26000.ethernet eth2: Link is Up - 1Gbps/Full - flow control rx/tx
  517. [ 33.190004] Atheros AR8216/AR8236/AR8316 mdio@ffe24520:00: Port 1 is up
  518. [ 33.202602] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  519. Router Turris successfully started.
  520. [ 36.021338] socat[5679]: unhandled signal 11 at 00000000 nip 10024ee0 lr 10021728 code 30001
  521. [ 38.723986] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  522. [ 38.730436] br-lan: port 2(wlan0) entered forwarding state
  523. [ 38.735947] br-lan: port 2(wlan0) entered forwarding state
  524. [ 40.741637] br-lan: port 2(wlan0) entered forwarding state
  525.  
  526.  
  527.  
  528. BusyBox v1.23.2 (2016-05-13 10:33:48 CEST) built-in shell (ash)
  529.  
  530. _______ _ _ _____ _____ _____ _____
  531. |__ __|| | | || __ \ | __ \ |_ _| / ____|
  532. | | | | | || |__) || |__) | | | | (___
  533. | | | | | || _ / | _ / | | \___ \
  534. | | | |__| || | \ \ | | \ \ _| |_ ____) |
  535. |_| \____/ |_| \_\|_| \_\|_____||_____/
  536.  
  537.  
  538.  
  539. root@turris:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!