API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 29th, 2013
28
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.68 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.8.13xenomai-bone26.1 (root@mah2) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Aug 27 22:10:05 CEST 2013
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 130816
  9. [ 0.000000] free_area_init_node: node 0, pgdat c0a57340, node_mem_map c0b39000
  10. [ 0.000000] Normal zone: 1024 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
  13. [ 0.000000] AM335X ES1.0 (neon )
  14. [ 0.000000] PERCPU: Embedded 11 pages/cpu @c0f49000 s23552 r8192 d13312 u45056
  15. [ 0.000000] pcpu-alloc: s23552 r8192 d13312 u45056 alloc=11*4096
  16. [ 0.000000] pcpu-alloc: [0] 0
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  18. [ 0.000000] Kernel command line: console=ttyO0,115200n8 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONE-EMMC-2G,cape-bebopr-brdg root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc ip=
  19. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  22. [ 0.000000] __ex_table already sorted, skipping sort
  23. [ 0.000000] allocated 1048576 bytes of page_cgroup
  24. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  25. [ 0.000000] Memory: 511MB = 511MB total
  26. [ 0.000000] Memory: 503204k/503204k available, 21084k reserved, 0K highmem
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  30. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  31. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. [ 0.000000] .text : 0xc0008000 - 0xc0984b6c (9715 kB)
  35. [ 0.000000] .init : 0xc0985000 - 0xc09d5c00 ( 323 kB)
  36. [ 0.000000] .data : 0xc09d6000 - 0xc0a5a300 ( 529 kB)
  37. [ 0.000000] .bss : 0xc0a5a300 - 0xc0b382c0 ( 888 kB)
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  42. [ 0.000000] Total of 128 interrupts on 1 active controller
  43. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  44. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  45. [ 0.000000] I-pipe, 24.000 MHz clocksource
  46. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  47. [ 0.000000] Interrupt pipeline (release #1)
  48. [ 0.000000] Console: colour dummy device 80x30
  49. [ 0.000821] Calibrating delay loop... 663.07 BogoMIPS (lpj=647168)
  50. [ 0.035034] pid_max: default: 32768 minimum: 301
  51. [ 0.035204] Security Framework initialized
  52. [ 0.035276] Mount-cache hash table entries: 512
  53. [ 0.041515] Initializing cgroup subsys cpuacct
  54. [ 0.041543] Initializing cgroup subsys memory
  55. [ 0.041589] Initializing cgroup subsys blkio
  56. [ 0.041696] CPU: Testing write buffer coherency: ok
  57. [ 0.042138] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  58. [ 0.042193] Setting up static identity map for 0x8069e448 - 0x8069e4a0
  59. [ 0.043363] Brought up 1 CPUs
  60. [ 0.043380] SMP: Total of 1 processors activated (663.07 BogoMIPS).
  61. [ 0.044460] devtmpfs: initialized
  62. [ 0.102795] pinctrl core: initialized pinctrl subsystem
  63. [ 0.102960] rstctl core: initialized rstctl subsystem
  64. [ 0.103327] regulator-dummy: no parameters
  65. [ 0.103742] NET: Registered protocol family 16
  66. [ 0.104339] DMA: preallocated 256 KiB pool for atomic coherent allocations
  67. [ 0.110162] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  68. [ 0.110651] platform 49000000.edma: alias fck already exists
  69. [ 0.110670] platform 49000000.edma: alias fck already exists
  70. [ 0.110684] platform 49000000.edma: alias fck already exists
  71. [ 0.111468] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  72. [ 0.111587] OMAP GPIO hardware version 0.1
  73. [ 0.112530] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  74. [ 0.113405] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  75. [ 0.114207] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  76. [ 0.114532] of_get_named_gpio_flags exited with status 52
  77. [ 0.114552] gpio-rctrl rstctl.3: loaded OK
  78. [ 0.117936] hw-breakpoint: debug architecture 0x4 unsupported.
  79. [ 0.119328] cpsw.0: No hwaddr in dt. Using c8:a0:30:aa:3c:49 from efuse
  80. [ 0.119350] cpsw.1: No hwaddr in dt. Using c8:a0:30:aa:3c:4b from efuse
  81. [ 0.128832] bio: create slab <bio-0> at 0
  82. [ 0.135992] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  83. [ 0.136159] of_get_named_gpio_flags: can't parse gpios property
  84. [ 0.136303] vmmcsd_fixed: 3300 mV
  85. [ 0.138051] SCSI subsystem initialized
  86. [ 0.138337] usbcore: registered new interface driver usbfs
  87. [ 0.138406] usbcore: registered new interface driver hub
  88. [ 0.138701] usbcore: registered new device driver usb
  89. [ 0.140125] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  90. [ 0.141300] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
  91. [ 0.142694] DCDC1: at 1500 mV
  92. [ 0.143619] vdd_mpu: 925 <--> 1325 mV at 1325 mV
  93. [ 0.144532] vdd_core: 925 <--> 1150 mV at 1125 mV
  94. [ 0.145404] LDO1: at 1800 mV
  95. [ 0.146266] LDO2: at 3300 mV
  96. [ 0.147925] LDO3: 1800 mV
  97. [ 0.148875] LDO4: at 3300 mV
  98. [ 0.149682] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  99. [ 0.150331] omap_i2c 44e0b000.i2c: unable to select pin group
  100. [ 0.150908] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  101. [ 0.152715] omap_i2c 4819c000.i2c: unable to select pin group
  102. [ 0.152877] media: Linux media interface: v0.10
  103. [ 0.152947] Linux video capture interface: v2.00
  104. [ 0.153054] pps_core: LinuxPPS API ver. 1 registered
  105. [ 0.153063] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  106. [ 0.153534] Advanced Linux Sound Architecture Driver Initialized.
  107. [ 0.154378] NetLabel: Initializing
  108. [ 0.154392] NetLabel: domain hash size = 128
  109. [ 0.154400] NetLabel: protocols = UNLABELED CIPSOv4
  110. [ 0.154477] NetLabel: unlabeled traffic allowed by default
  111. [ 0.154733] Switching to clocksource ipipe_tsc
  112. [ 0.190293] NET: Registered protocol family 2
  113. [ 0.191020] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  114. [ 0.191106] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  115. [ 0.191197] TCP: Hash tables configured (established 4096 bind 4096)
  116. [ 0.191267] TCP: reno registered
  117. [ 0.191285] UDP hash table entries: 256 (order: 1, 12288 bytes)
  118. [ 0.191312] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  119. [ 0.191587] NET: Registered protocol family 1
  120. [ 0.192150] RPC: Registered named UNIX socket transport module.
  121. [ 0.192164] RPC: Registered udp transport module.
  122. [ 0.192172] RPC: Registered tcp transport module.
  123. [ 0.192180] RPC: Registered tcp NFSv4.1 backchannel transport module.
  124. [ 0.192457] Trying to unpack rootfs image as initramfs...
  125. [ 0.400570] Freeing initrd memory: 2904K
  126. [ 0.401215] CPU PMU: probing PMU on CPU 0
  127. [ 0.401239] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  128. [ 0.401669] omap2_mbox_probe: platform not supported
  129. [ 0.563352] I-pipe: head domain Xenomai registered.
  130. [ 0.563385] Xenomai: hal/arm started.
  131. [ 0.564475] Xenomai: scheduling class idle registered.
  132. [ 0.564497] Xenomai: scheduling class rt registered.
  133. [ 0.569536] Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded.
  134. [ 0.569548] Xenomai: debug mode enabled.
  135. [ 0.569983] Xenomai: starting native API services.
  136. [ 0.569997] Xenomai: starting POSIX services.
  137. [ 0.570140] Xenomai: starting RTDM services.
  138. [ 0.571328] VFS: Disk quotas dquot_6.5.2
  139. [ 0.571491] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  140. [ 0.572374] NFS: Registering the id_resolver key type
  141. [ 0.572466] Key type id_resolver registered
  142. [ 0.572477] Key type id_legacy registered
  143. [ 0.572524] fuse init (API version 7.20)
  144. [ 0.573217] Btrfs loaded
  145. [ 0.573343] msgmni has been set to 988
  146. [ 0.575456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  147. [ 0.575473] io scheduler noop registered
  148. [ 0.575483] io scheduler deadline registered
  149. [ 0.575510] io scheduler cfq registered (default)
  150. [ 0.576641] tps65217-bl tps65217-bl: no platform data provided
  151. [ 0.576810] tps65217-bl: probe of tps65217-bl failed with error -22
  152. [ 0.577401] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  153. [ 0.579096] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  154. [ 0.579356] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  155. [ 1.381884] console [ttyO0] enabled
  156. [ 1.386359] [drm] Initialized drm 1.1.0 20060810
  157. [ 1.399746] brd: module loaded
  158. [ 1.407510] loop: module loaded
  159. [ 1.410942] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  160. [ 1.418222] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  161. [ 1.425511] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  162. [ 1.432780] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  163. [ 1.440044] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  164. [ 1.454017] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5C,3513BBBK1445'
  165. [ 1.461818] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
  166. [ 1.469703] bone-capemgr bone_capemgr.8: Skipping disabled cape with part# BB-BONE-EMMC-2G
  167. [ 1.478403] bone-capemgr bone_capemgr.8: Skipping disabled cape with part# BB-BONELT-HDMI
  168. [ 1.511103] bone-capemgr bone_capemgr.8: slot #0: 'BeBoPr (3D-printer/CNC) Cape,R2,www.bebopr.info,cape-bebopr-brdg'
  169. [ 1.553256] bone-capemgr bone_capemgr.8: slot #1: No cape found
  170. [ 1.590363] bone-capemgr bone_capemgr.8: slot #2: No cape found
  171. [ 1.627473] bone-capemgr bone_capemgr.8: slot #3: No cape found
  172. [ 1.633726] bone-capemgr bone_capemgr.8: slot #4: specific override
  173. [ 1.640325] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
  174. [ 1.648373] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  175. [ 1.658483] bone-capemgr bone_capemgr.8: slot #5: specific override
  176. [ 1.665088] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
  177. [ 1.673136] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  178. [ 1.683159] bone-capemgr bone_capemgr.8: slot #6: specific override
  179. [ 1.689759] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
  180. [ 1.697807] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
  181. [ 1.708111] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# cape-bebopr-brdg
  182. [ 1.717903] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# BB-BONE-EMMC-2G
  183. [ 1.727588] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# BB-BONELT-HDMI
  184. [ 1.737334] bone-capemgr bone_capemgr.8: initialized OK.
  185. [ 1.742950] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  186. [ 1.751817] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  187. [ 1.761835] OneNAND driver initializing
  188. [ 1.766863] usbcore: registered new interface driver cdc_ether
  189. [ 1.773085] usbcore: registered new interface driver rndis_host
  190. [ 1.779384] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  191. [ 1.788235] usbcore: registered new interface driver cdc_ncm
  192. [ 1.794214] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
  193. [ 1.809190] usbcore: registered new interface driver cdc_acm
  194. [ 1.815157] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  195. [ 1.823564] Initializing USB Mass Storage driver...
  196. [ 1.828726] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
  197. [ 1.840143] usbcore: registered new interface driver usb-storage
  198. [ 1.846460] USB Mass Storage support registered.
  199. [ 1.851552] bone-capemgr bone_capemgr.8: slot #6: #2 overlays
  200. [ 1.859063] platform 4830e000.fb: alias fck already exists
  201. [ 1.865042] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  202. [ 1.871575] bone-capemgr bone_capemgr.8: slot #6: Applied #2 overlays.
  203. [ 1.878455] bone-capemgr bone_capemgr.8: loader: done slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  204. [ 1.887439] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  205. [ 1.892684] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  206. [ 1.901477] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  207. [ 1.901490] musb-hdrc: MHDRC RTL version 2.0
  208. [ 1.901498] musb-hdrc: setup fifo_mode 4
  209. [ 1.901516] musb-hdrc: 28/31 max ep, 16384/16384 memory
  210. [ 1.901614] musb-hdrc musb-hdrc.0.auto: *** mode=3
  211. [ 1.906665] musb-hdrc musb-hdrc.0.auto: *** power=250
  212. [ 1.912713] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  213. [ 1.917970] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  214. [ 1.926774] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  215. [ 1.926786] musb-hdrc: MHDRC RTL version 2.0
  216. [ 1.926794] musb-hdrc: setup fifo_mode 4
  217. [ 1.926807] musb-hdrc: 28/31 max ep, 16384/16384 memory
  218. [ 1.926894] musb-hdrc musb-hdrc.1.auto: *** mode=1
  219. [ 1.931969] musb-hdrc musb-hdrc.1.auto: *** power=250
  220. [ 1.937296] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  221. [ 1.943634] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  222. [ 1.951930] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
  223. [ 1.952021] usb usb1: default language 0x0409
  224. [ 1.952059] usb usb1: udev 1, busnum 1, minor = 0
  225. [ 1.952072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  226. [ 1.959226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  227. [ 1.966817] usb usb1: Product: MUSB HDRC host driver
  228. [ 1.972040] usb usb1: Manufacturer: Linux 3.8.13xenomai-bone26.1 musb-hcd
  229. [ 1.979171] usb usb1: SerialNumber: musb-hdrc.1.auto
  230. [ 1.984954] usb usb1: usb_probe_device
  231. [ 1.984973] usb usb1: configuration #1 chosen from 1 choice
  232. [ 1.985023] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  233. [ 1.985148] hub 1-0:1.0: usb_probe_interface
  234. [ 1.985161] hub 1-0:1.0: usb_probe_interface - got id
  235. [ 1.985180] hub 1-0:1.0: USB hub found
  236. [ 1.989187] hub 1-0:1.0: 1 port detected
  237. [ 1.993327] hub 1-0:1.0: standalone hub
  238. [ 1.993339] hub 1-0:1.0: individual port power switching
  239. [ 1.993350] hub 1-0:1.0: no over-current protection
  240. [ 1.993359] hub 1-0:1.0: Single TT
  241. [ 1.993371] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  242. [ 1.993382] hub 1-0:1.0: power on to power good time: 10ms
  243. [ 1.993409] hub 1-0:1.0: local power source is good
  244. [ 1.993478] hub 1-0:1.0: enabling power on all ports
  245. [ 1.994241] mousedev: PS/2 mouse device common for all mice
  246. [ 2.002221] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  247. [ 2.009771] 44e3e000.rtc: already running
  248. [ 2.014249] i2c /dev entries driver
  249. [ 2.019058] pps_ldisc: PPS line discipline registered
  250. [ 2.024496] Driver for 1-wire Dallas network protocol.
  251. [ 2.031286] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  252. [ 2.039059] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
  253. [ 2.048289] of_get_named_gpio_flags exited with status 6
  254. [ 2.048302] of_get_named_gpio_flags: can't parse gpios property
  255. [ 2.048312] of_get_named_gpio_flags: can't parse gpios property
  256. [ 2.048335] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
  257. [ 2.055596] omap_hsmmc mmc.4: Failed to get rstctl; not using any
  258. [ 2.062367] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  259. [ 2.069585] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  260. [ 2.076914] mmc.4 supply vmmc_aux not found, using dummy regulator
  261. [ 2.083814] omap_hsmmc mmc.4: pins are not configured from the driver
  262. [ 2.094405] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  263. [ 2.094466] hub 1-0:1.0: hub_suspend
  264. [ 2.094496] usb usb1: bus auto-suspend, wakeup 1
  265. [ 2.118184] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
  266. [ 2.129943] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
  267. [ 2.137261] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  268. [ 2.146261] leds-gpio gpio-leds.7: pins are not configured from the driver
  269. [ 2.153514] of_get_named_gpio_flags exited with status 53
  270. [ 2.153528] of_get_named_gpio_flags exited with status 54
  271. [ 2.153540] of_get_named_gpio_flags exited with status 55
  272. [ 2.153552] of_get_named_gpio_flags exited with status 56
  273. [ 2.153566] of_get_named_gpio_flags exited with status 53
  274. [ 2.153806] of_get_named_gpio_flags exited with status 54
  275. [ 2.153944] of_get_named_gpio_flags exited with status 55
  276. [ 2.154065] of_get_named_gpio_flags exited with status 56
  277. [ 2.154425] ledtrig-cpu: registered to indicate activity on CPUs
  278. [ 2.161148] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  279. [ 2.168402] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  280. [ 2.176141] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  281. [ 2.182308] usb usb1: usb wakeup-resume
  282. [ 2.182346] usb usb1: usb auto-resume
  283. [ 2.182366] hub 1-0:1.0: hub_resume
  284. [ 2.182406] hub 1-0:1.0: port 1: status 0101 change 0001
  285. [ 2.182851] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  286. [ 2.190052] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  287. [ 2.198104] usbcore: registered new interface driver usbhid
  288. [ 2.204002] usbhid: USB HID core driver
  289. [ 2.209032] ashmem: initialized
  290. [ 2.212713] logger: created 256K log 'log_main'
  291. [ 2.217850] logger: created 256K log 'log_events'
  292. [ 2.223114] logger: created 256K log 'log_radio'
  293. [ 2.228266] logger: created 256K log 'log_system'
  294. [ 2.235538] TCP: cubic registered
  295. [ 2.239213] NET: Registered protocol family 10
  296. [ 2.244878] NET: Registered protocol family 17
  297. [ 2.249919] Key type dns_resolver registered
  298. [ 2.254689] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  299. [ 2.262840] ThumbEE CPU extension supported.
  300. [ 2.267376] Registering SWP/SWPB emulation handler
  301. [ 2.273114] registered taskstats version 1
  302. [ 2.279126] of_get_named_gpio_flags: can't parse gpios property
  303. [ 2.279148] tilcdc 4830e000.fb: No power control GPIO
  304. [ 2.285895] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
  305. [ 2.285953] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
  306. [ 2.294769] mmc0: host does not support reading read-only switch. assuming write-enable.
  307. [ 2.307248] mmc0: new high speed SDHC card at address e624
  308. [ 2.313625] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  309. [ 2.322169] mmcblk0: p1 p2
  310. [ 2.391188] usb 1-1: new high-speed USB device number 2 using musb-hdrc
  311. [ 2.401638] tilcdc 4830e000.fb: found TDA19988
  312. [ 2.406975] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  313. [ 2.413943] [drm] No driver support for vblank timestamp query.
  314. [ 2.516348] usb 1-1: udev 2, busnum 1, minor = 1
  315. [ 2.516361] usb 1-1: New USB device found, idVendor=050d, idProduct=0234
  316. [ 2.516368] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  317. [ 2.516771] usb 1-1: usb_probe_device
  318. [ 2.516783] usb 1-1: configuration #1 chosen from 1 choice
  319. [ 2.516935] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  320. [ 2.517055] hub 1-1:1.0: usb_probe_interface
  321. [ 2.517062] hub 1-1:1.0: usb_probe_interface - got id
  322. [ 2.517077] hub 1-1:1.0: USB hub found
  323. [ 2.517146] hub 1-1:1.0: 4 ports detected
  324. [ 2.517153] hub 1-1:1.0: standalone hub
  325. [ 2.517158] hub 1-1:1.0: ganged power switching
  326. [ 2.517163] hub 1-1:1.0: global over-current protection
  327. [ 2.517304] hub 1-1:1.0: TT per port
  328. [ 2.517312] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
  329. [ 2.517318] hub 1-1:1.0: power on to power good time: 100ms
  330. [ 2.517445] hub 1-1:1.0: local power source is good
  331. [ 2.517451] hub 1-1:1.0: no over-current condition exists
  332. [ 2.517639] hub 1-1:1.0: enabling power on all ports
  333. [ 2.517923] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
  334. [ 2.517949] hub 1-0:1.0: port 1 enable change, status 00000503
  335. [ 2.525794] tilcdc 4830e000.fb: Not sure which CEA mode to set, leaving as DVI
  336. [ 2.544061] Console: switching to colour frame buffer device 160x64
  337. [ 2.589696] tilcdc 4830e000.fb: fb0: frame buffer device
  338. [ 2.595372] tilcdc 4830e000.fb: registered panic notifier
  339. [ 2.601068] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  340. [ 2.621642] hub 1-1:1.0: port 1: status 0301 change 0001
  341. [ 2.621787] hub 1-1:1.0: port 2: status 0301 change 0001
  342. [ 2.656812] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  343. [ 2.663235] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  344. [ 2.677691] libphy: 4a101000.mdio: probed
  345. [ 2.682018] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  346. [ 2.691857] Detected MACID = c8:a0:30:aa:3c:49
  347. [ 2.696532] cpsw 4a100000.ethernet: NAPI disabled
  348. [ 2.703087] omap_rtc 44e3e000.rtc: setting system clock to 2013-12-29 13:22:42 UTC (1388323362)
  349. [ 2.716929] ALSA device list:
  350. [ 2.720121] No soundcards found.
  351. [ 2.723881] hub 1-1:1.0: state 7 ports 4 chg 0006 evt 0000
  352. [ 2.723995] hub 1-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
  353. [ 2.724915] Freeing init memory: 320K
  354. [ 2.737603] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
  355. [ 2.803528] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc
  356. [ 2.825374] udevd[96]: starting version 175
  357. [ 2.830015] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
  358. [ 2.911230] usb 1-1.1: skipped 1 descriptor after interface
  359. [ 2.911619] usb 1-1.1: default language 0x0409
  360. [ 2.913493] usb 1-1.1: udev 3, busnum 1, minor = 2
  361. [ 2.913515] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016
  362. [ 2.920804] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  363. [ 2.928489] usb 1-1.1: Product: Optical USB Mouse
  364. [ 2.933440] usb 1-1.1: Manufacturer: Logitech
  365. [ 2.950307] usb 1-1.1: usb_probe_device
  366. [ 2.950336] usb 1-1.1: configuration #1 chosen from 1 choice
  367. [ 2.950726] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
  368. [ 2.950945] usbhid 1-1.1:1.0: usb_probe_interface
  369. [ 2.950961] usbhid 1-1.1:1.0: usb_probe_interface - got id
  370. [ 2.956619] input: Logitech Optical USB Mouse as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
  371. [ 2.993426] hid-generic 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-musb-hdrc.1.auto-1.1/input0
  372. [ 3.035854] hub 1-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
  373. [ 3.049689] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
  374. [ 3.116007] usb 1-1.2: new low-speed USB device number 4 using musb-hdrc
  375. [ 3.141428] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
  376. [ 3.225639] usb 1-1.2: skipped 1 descriptor after interface
  377. [ 3.226637] usb 1-1.2: default language 0x0409
  378. [ 3.230601] usb 1-1.2: udev 4, busnum 1, minor = 3
  379. [ 3.230628] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
  380. [ 3.237933] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  381. [ 3.245619] usb 1-1.2: Product: HP Basic USB Keyboard
  382. [ 3.250935] usb 1-1.2: Manufacturer: CHICONY
  383. [ 3.280095] usb 1-1.2: usb_probe_device
  384. [ 3.280124] usb 1-1.2: configuration #1 chosen from 1 choice
  385. [ 3.281436] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
  386. [ 3.281699] usbhid 1-1.2:1.0: usb_probe_interface
  387. [ 3.281716] usbhid 1-1.2:1.0: usb_probe_interface - got id
  388. [ 3.288028] input: CHICONY HP Basic USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
  389. [ 3.313624] hid-generic 0003:03F0:0024.0002: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-musb-hdrc.1.auto-1.2/input0
  390. [ 4.616790] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  391. [ 6.575101] udevd[330]: starting version 175
  392. [ 11.005929] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  393. [ 11.320551] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  394. [ 17.391845] net eth0: initializing cpsw version 1.12 (0)
  395. [ 17.399701] net eth0: phy found : id is : 0x7c0f1
  396. [ 17.406287] libphy: PHY 4a101000.mdio:01 not found
  397. [ 17.411434] net eth0: phy 4a101000.mdio:01 not found on slave 1
  398. [ 17.423785] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  399. [ 20.477602] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
  400. [ 20.483656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  401. [ 23.813947] Installing knfsd (copyright (C) 1996 [email protected]).
  402. [ 26.555687] gadget: using random self ethernet address
  403. [ 26.595879] usb0: MAC fe:2c:b9:35:6b:36
  404. [ 26.600148] usb0: HOST MAC c8:a0:30:aa:3c:4b
  405. [ 26.680538] gadget: Mass Storage Function, version: 2009/09/11
  406. [ 26.686874] gadget: Number of LUNs=1
  407. [ 26.748102] lun0: LUN: removable file: /dev/mmcblk0p1
  408. [ 26.813306] gadget: Multifunction Composite Gadget
  409. [ 26.833961] gadget: g_multi ready
  410. [ 26.851544] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  411. [ 26.883960] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
  412. [ 26.910283] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
  413. [ 26.910393] usb usb2: default language 0x0409
  414. [ 26.910431] usb usb2: udev 1, busnum 2, minor = 128
  415. [ 26.910446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  416. [ 26.917794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  417. [ 26.925418] usb usb2: Product: MUSB HDRC host driver
  418. [ 26.930646] usb usb2: Manufacturer: Linux 3.8.13xenomai-bone26.1 musb-hcd
  419. [ 26.937780] usb usb2: SerialNumber: musb-hdrc.0.auto
  420. [ 26.967515] usb usb2: usb_probe_device
  421. [ 26.967544] usb usb2: configuration #1 chosen from 1 choice
  422. [ 26.967642] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  423. [ 26.972267] hub 2-0:1.0: usb_probe_interface
  424. [ 26.972289] hub 2-0:1.0: usb_probe_interface - got id
  425. [ 26.972318] hub 2-0:1.0: USB hub found
  426. [ 27.002043] hub 2-0:1.0: 1 port detected
  427. [ 27.018305] hub 2-0:1.0: standalone hub
  428. [ 27.018332] hub 2-0:1.0: individual port power switching
  429. [ 27.018344] hub 2-0:1.0: no over-current protection
  430. [ 27.018354] hub 2-0:1.0: Single TT
  431. [ 27.018367] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
  432. [ 27.018378] hub 2-0:1.0: power on to power good time: 10ms
  433. [ 27.018435] hub 2-0:1.0: local power source is good
  434. [ 27.018552] hub 2-0:1.0: enabling power on all ports
  435. [ 27.119923] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
  436. [ 27.120003] hub 2-0:1.0: hub_suspend
  437. [ 27.120034] usb usb2: bus auto-suspend, wakeup 1
  438. [ 27.668650] tilcdc 4830e000.fb: timeout waiting for framedone
  439. [ 29.794496] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  440. [ 169.134944] bone-capemgr bone_capemgr.8: part_number 'BB-LCNC-BEBOPRBR', version 'N/A'
  441. [ 169.144217] bone-capemgr bone_capemgr.8: slot #7: generic override
  442. [ 169.150793] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 7
  443. [ 169.158850] bone-capemgr bone_capemgr.8: slot #7: 'Override Board Name,00A0,Override Manuf,BB-LCNC-BEBOPRBR'
  444. [ 169.169436] bone-capemgr bone_capemgr.8: slot #7: Requesting part number/version based 'BB-LCNC-BEBOPRBR-00A0.dtbo
  445. [ 169.180380] bone-capemgr bone_capemgr.8: slot #7: Requesting firmware 'BB-LCNC-BEBOPRBR-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
  446. [ 169.200815] bone-capemgr bone_capemgr.8: slot #7: dtbo 'BB-LCNC-BEBOPRBR-00A0.dtbo' loaded; converting to live tree
  447. [ 169.213799] bone-capemgr bone_capemgr.8: slot #7: #2 overlays
  448. [ 169.235675] omap_hwmod: pruss: failed to hardreset
  449. [ 169.246034] bone-capemgr bone_capemgr.8: slot #7: Applied #2 overlays.
  450. [ 170.481999] bone-capemgr bone_capemgr.8: part_number 'cape-bone-iio', version 'N/A'
  451. [ 170.490934] bone-capemgr bone_capemgr.8: slot #8: generic override
  452. [ 170.497541] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 8
  453. [ 170.505601] bone-capemgr bone_capemgr.8: slot #8: 'Override Board Name,00A0,Override Manuf,cape-bone-iio'
  454. [ 170.515991] bone-capemgr bone_capemgr.8: slot #8: Requesting part number/version based 'cape-bone-iio-00A0.dtbo
  455. [ 170.526632] bone-capemgr bone_capemgr.8: slot #8: Requesting firmware 'cape-bone-iio-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
  456. [ 170.541983] bone-capemgr bone_capemgr.8: slot #8: dtbo 'cape-bone-iio-00A0.dtbo' loaded; converting to live tree
  457. [ 170.553978] bone-capemgr bone_capemgr.8: slot #8: #1 overlays
  458. [ 170.570357] bone-iio-helper helper.12: ready
  459. [ 170.579728] bone-capemgr bone_capemgr.8: slot #8: Applied #1 overlays.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!