Cuongle

Texas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)

OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #53de00019ff80000015eeaa10103400d
Hit any key to stop autoboot:  0
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

134 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3194256 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3194192 Bytes = 3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................
[    0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) 1
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa8
 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwaitn8
[    0.000000] Beagle expansionboard: none
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 496256KB available (5884K code, 671K data, 204K init, 0K)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Calibrating delay loop... 484.21 BogoMIPS (lpj=1892352)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] OMAP3 Beagle Rev: xM A
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] omap_init_mbox: platform not supported
[    0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
[    9.574401] OMAP DMA hardware revision 5.0
[    9.580596] bio: create slab <bio-0> at 0
[    9.581878] SCSI subsystem initialized
[    9.583251] usbcore: registered new interface driver usbfs
[    9.583435] usbcore: registered new interface driver hub
[    9.583618] usbcore: registered new device driver usb
[    9.595123] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[    9.597778] twl4030: PIH (irq 7) chaining IRQs 368..375
[    9.597839] twl4030: power (irq 373) chaining IRQs 376..383
[    9.598144] twl4030: gpio (irq 368) chaining IRQs 384..401
[    9.599822] regulator: VUSB1V5: 1500 mV normal standby
[    9.600097] regulator: VUSB1V8: 1800 mV normal standby
[    9.600311] regulator: VUSB3V1: 3100 mV normal standby
[    9.601623] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    9.602050] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[    9.602325] regulator: VDAC: 1800 mV normal standby
[    9.602569] regulator: VPLL2: 1800 mV normal standby
[    9.602813] regulator: VSIM: 1800 <--> 3000 mV normal standby
[    9.603179] regulator: VAUX3: 1800 mV normal standby
[    9.603546] regulator: VAUX4: 1800 mV normal standby
[    9.603759] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[    9.614074] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[    9.615264] Switching to clocksource 32k_counter
[    9.624420] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[    9.628021] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    9.628082] musb_hdrc musb_hdrc: MUSB HDRC host driver
[    9.628234] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number1
[    9.628387] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.628417] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[    9.628479] usb usb1: Product: MUSB HDRC host driver
[    9.628509] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[    9.628540] usb usb1: SerialNumber: musb_hdrc
[    9.629180] hub 1-0:1.0: USB hub found
[    9.629211] hub 1-0:1.0: 1 port detected
[    9.630279] NET: Registered protocol family 2
[    9.630554] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    9.631164] TCP established hash table entries: 16384 (order: 5, 131072 byte)
[    9.631591] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    9.631835] TCP: Hash tables configured (established 16384 bind 16384)
[    9.631866] TCP reno registered
[    9.631896] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    9.631958] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    9.632202] NET: Registered protocol family 1
[    9.632659] RPC: Registered udp transport module.
[    9.632690] RPC: Registered tcp transport module.
[    9.632720] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.633636] omap-iommu omap-iommu.0: isp registered
[    9.635375] VFS: Disk quotas dquot_6.5.2
[    9.635498] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    9.636566] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.637420] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
[    9.638275] msgmni has been set to 969
[    9.642028] alg: No test for stdrng (krng)
[    9.642333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    9.642395] io scheduler noop registered
[    9.642425] io scheduler deadline registered
[    9.642578] io scheduler cfq registered (default)
[    9.701568] OMAP DSS rev 2.0
[    9.701660] OMAP DISPC rev 3.0
[    9.701721] OMAP VENC rev 2
[    9.701965] OMAP DSI rev 1.0
[   10.038391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   10.055755] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[   10.072540] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[   10.089263] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[   10.669799] console [ttyS2] enabled
[   10.680053] brd: module loaded
[   10.686431] loop: module loaded
[   10.690948] omap2-nand driver initializing
[   10.695404] No NAND device found!!!
[   10.699066] No NAND device found!!!
[   10.703613] usbcore: registered new interface driver catc
[   10.709136] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   10.715209] usbcore: registered new interface driver kaweth
[   10.720855] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr
[   10.728515] usbcore: registered new interface driver pegasus
[   10.734283] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   10.741302] usbcore: registered new interface driver rtl8150
[   10.747100] usbcore: registered new interface driver asix
[   10.752655] usbcore: registered new interface driver cdc_ether
[   10.758636] usbcore: registered new interface driver dm9601
[   10.764373] usbcore: registered new interface driver smsc95xx
[   10.770263] usbcore: registered new interface driver gl620a
[   10.776000] usbcore: registered new interface driver net1080
[   10.781799] usbcore: registered new interface driver plusb
[   10.787445] usbcore: registered new interface driver rndis_host
[   10.793487] usbcore: registered new interface driver cdc_subset
[   10.799560] usbcore: registered new interface driver zaurus
[   10.805297] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
[   10.813415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.820251] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   10.826263] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb2
[   10.833923] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   10.849792] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   10.855712] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   10.862579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[   10.869903] usb usb2: Product: OMAP-EHCI Host Controller
[   10.875305] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[   10.880767] usb usb2: SerialNumber: ehci-omap.0
[   10.886016] hub 2-0:1.0: USB hub found
[   10.889892] hub 2-0:1.0: 3 ports detected
[   10.920196] Initializing USB Mass Storage driver...
[   10.925323] usbcore: registered new interface driver usb-storage
[   10.931427] USB Mass Storage support registered.
[   10.936462] mice: PS/2 mouse device common for all mice
[   10.942169] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   10.950012] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/11
[   10.960784] i2c /dev entries driver
[   10.964874] Linux video capture interface: v2.00
[   10.969879] omap-iommu omap-iommu.0: isp: version 1.1
[   10.976257] vpfe_init
[   10.979156] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   11.092437] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[   11.099517] Registered led device: beagleboard::usr0
[   11.104705] Registered led device: beagleboard::usr1
[   11.111236] Registered led device: beagleboard::pmu_stat
[   11.118347] usbcore: registered new interface driver usbhid
[   11.124023] usbhid: USB HID core driver
[   11.128082] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   11.135009] usbcore: registered new interface driver snd-usb-audio
[   11.208190] No device for DAI omap-mcbsp-dai-0
[   11.212738] No device for DAI omap-mcbsp-dai-1
[   11.217254] No device for DAI omap-mcbsp-dai-2
[   11.221740] No device for DAI omap-mcbsp-dai-3
[   11.226257] No device for DAI omap-mcbsp-dai-4
[   11.230743] OMAP3 Beagle SoC init
[   11.234893] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[   11.246337] ALSA device list:
[   11.249450]   #0: omap3beagle (twl4030)
[   11.253417] oprofile: using arm/armv7
[   11.257385] TCP cubic registered
[   11.260650] NET: Registered protocol family 17
[   11.265197] NET: Registered protocol family 15
[   11.269775] lib80211: common routines for IEEE802.11 drivers
[   11.275543] ThumbEE CPU extension supported.
[   11.279876] Power Management for TI OMAP3.
[   11.284393] usb 2-2: new high speed USB device using ehci-omap and address 2
[   11.292572] Unable to set L3 frequency (400000000)
[   11.297515] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 z
[   11.304901] IVA2 clocking rate: 800 MHz
[   11.474792] SmartReflex driver initialized
[   11.479034] omap3beaglelmb: Driver registration complete
[   11.489837] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
[   11.498138] registered taskstats version 1
[   11.600189] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[   11.606994] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.614959] hub 2-2:1.0: USB hub found
[   11.632385] Console: switching to colour frame buffer device 160x45
[   11.651977] hub 2-2:1.0: 5 ports detected
[   11.658874] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[   11.666717] regulator_init_complete: incomplete constraints, leaving VDAC on
[   11.674957] omap_vout omap_vout: probed for an unknown device
[   11.681274] Waiting for root device /dev/mmcblk0p2...
[   11.701385] mmc0: host does not support reading read-only switch. assuming w.
[   11.709747] mmc0: new high speed SDHC card at address 1234
[   11.715728] mmcblk0: mmc0:1234 SA04G 3.67 GiB
[   11.720611]  mmcblk0: p1 p2
[   11.959503] usb 2-2.1: new high speed USB device using ehci-omap and address3
[   12.084564] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[   12.095397] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
[   12.109527] smsc95xx v1.0.4
[   12.171295] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 23
[   27.976257] kjournald starting.  Commit interval 5 seconds
[   28.689117] EXT3-fs (mmcblk0p2): using internal journal
[   28.698699] EXT3-fs (mmcblk0p2): recovery complete
[   28.716522] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[   28.727996] VFS: Mounted root (ext3 filesystem) on device 179:2.
[   28.743072] devtmpfs: mounted
[   28.750457] Freeing init memory: 204K
INIT: version 2.86 booting
Please wait: booting...
Starting udev
Remounting root file system...
Caching udev devnodes
Populating dev cache
[   48.512145] Bluetooth: Core ver 2.15
[   48.521423] NET: Registered protocol family 31
[   48.530426] Bluetooth: HCI device and connection manager initialized
[   48.541229] Bluetooth: HCI socket layer initialized
[   48.567626] Bluetooth: L2CAP ver 2.14
[   48.575836] Bluetooth: L2CAP socket layer initialized
[   48.602172] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   48.724639] NET: Registered protocol family 10
[   48.766265] Bluetooth: RFCOMM TTY layer initialized
[   48.775634] Bluetooth: RFCOMM socket layer initialized
[   48.785003] Bluetooth: RFCOMM ver 1.11
ALSA: Restoring mixer settings...
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
eth0      No such device

ifconfig: SIOCGIFFLAGS: No such device
usb0      no wireless extensions.

udhcpc (v1.13.2) started
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Apr 19 17:25:00 BST 2011
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
Configuring leds:
  beagleboard::pmu_stat: none
  beagleboard::usr0: heartbeat
  beagleboard::usr1: mmc0
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting Vixie-cron.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting internet superserver: xinetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Network connection manager daemon: NetworkManager.
Starting GNOME Display Manager gdm

.-------.
|       |                  .-.
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2010.7-test-20110220 beagleboard ttyS2

beagleboard login: root