dmesg

<5>[    0.000000] Linux version 3.0.8+ (android5@Linux) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #70 PREEMPT Thu May 17 11:41:13 CST 2012

<7>[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f

<7>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

<7>[    0.000000] Machine: sun4i

<6>[    0.000000] Total Detected Memory: 1024MB with 2 banks

<6>[    0.000000] Memory Reserved(in bytes):

<6>[    0.000000] 	LCD: 0x5a000000, 0x02000000

<6>[    0.000000] 	SYS: 0x43000000, 0x00010000

<6>[    0.000000] 	G2D: 0x58000000, 0x01000000

<6>[    0.000000] 	VE : 0x44000000, 0x05000000

<6>[    0.000000] 	VE : 0x49000000, 0x01000000

<7>[    0.000000] Memory policy: ECC disabled, Data cache writeback

<7>[    0.000000] On node 0 totalpages: 245760

<7>[    0.000000] free_area_init_node: node 0, pgdat c07b6378, node_mem_map c10d8000

<7>[    0.000000]   Normal zone: 1280 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 146176 pages, LIFO batch:31

<7>[    0.000000]   HighMem zone: 768 pages used for memmap

<7>[    0.000000]   HighMem zone: 97536 pages, LIFO batch:31

<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

<7>[    0.000000] pcpu-alloc: [0] 0

<7>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243712

<5>[    0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8

<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Memory: 448MB 512MB = 960MB total

<5>[    0.000000] Memory: 832804k/832804k available, 150236k reserved, 393216K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

<5>[    0.000000]     vmalloc : 0xe8800000 - 0xf0000000   ( 120 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .init : 0xc0008000 - 0xc002f000   ( 156 kB)

<5>[    0.000000]       .text : 0xc002f000 - 0xc076f81c   (7427 kB)

<5>[    0.000000]       .data : 0xc0770000 - 0xc07c0450   ( 322 kB)

<5>[    0.000000]        .bss : 0xc07c0474 - 0xc097bc38   (1774 kB)

<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

<6>[    0.000000] NR_IRQS:96 nr_irqs:96 96

<6>[    0.000000] timer0: Periodic Mode

<7>[    0.000000] sw_timer_init,line:397

<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<7>[    0.000000] aw_clksrc_init, line:338

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000095] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)

<6>[    0.040022] pid_max: default: 32768 minimum: 301

<6>[    0.040152] Mount-cache hash table entries: 512

<6>[    0.040442] CPU: Testing write buffer coherency: ok

<6>[    0.040627] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available

<6>[    0.041085] devtmpfs: initialized

<6>[    0.042331] print_constraints: dummy:

<6>[    0.042464] NET: Registered protocol family 16

<6>[    0.042993] hw-breakpoint: debug architecture 0x4 unsupported.

<7>[    0.043502] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics

<6>[    0.043559] Initialize DMAC OK

<6>[    0.048325] bio: create slab <bio-0> at 0

<5>[    0.048884] SCSI subsystem initialized

<6>[    0.049087] usbcore: registered new interface driver usbfs

<6>[    0.049155] usbcore: registered new interface driver hub

<6>[    0.049286] usbcore: registered new device driver usb

<6>[    0.049688] Advanced Linux Sound Architecture Driver Version 1.0.24.

<6>[    0.049991] Bluetooth: Core ver 2.16

<6>[    0.050000] NET: Registered protocol family 31

<6>[    0.050000] Bluetooth: HCI device and connection manager initialized

<6>[    0.050000] Bluetooth: HCI socket layer initialized

<6>[    0.050000] Bluetooth: L2CAP socket layer initialized

<6>[    0.050000] Bluetooth: SCO socket layer initialized

<6>[    0.050000] cfg80211: Calling CRDA to update world regulatory domain

<7>[    0.050000] Init eGon pin module V2.0

<6>[    0.050000] Switching to clocksource aw 64bits couter

<5>[    0.050000] FS-Cache: Loaded

<6>[    0.050000] CacheFiles: Loaded

<6>[    0.050000] Switched to NOHz mode on CPU #0

<7>[    0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG

<7>[    0.050000] [sw_hcd0]: usb host driver initialize........

<7>[    0.050000] [sw_hcd0]: open_usb_clock

<7>[    0.066504] [sw_hcd0]: host_init_state = 0

<7>[    0.066512] [sw_hcd0]: platform is usb host

<7>[    0.066577] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38

<6>[    0.066600] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver

<6>[    0.066616] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1

<6>[    0.067130] hub 1-0:1.0: USB hub found

<6>[    0.067153] hub 1-0:1.0: 1 port detected

<7>[    0.067187] wrn: hcd is not enable, need not start hcd

<7>[    0.067427] [sw_hcd0]: sw_usb_host0_disable start

<7>[    0.067440] -------sw_hcd0_soft_disconnect---------

<7>[    0.067451] [sw_hcd_host0]: Set USB Power OFF

<7>[    0.067461] wrn: hcd is not enable, need not stop hcd

<7>[    0.067487] [sw_hcd0]: close_usb_clock

<7>[    0.067529] [sw_hcd0]: sw_usb_host0_disable end

<7>[    0.067567] [sw_udc]: udc_init: version 20080411

<7>[    0.067776] axp driver uning configuration failed(539)

<7>[    0.067796] axp driver uning configuration failed(551)

<6>[    0.067955] NET: Registered protocol family 2

<6>[    0.068060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.068414] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>[    0.070530] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.071219] TCP: Hash tables configured (established 131072 bind 65536)

<6>[    0.071230] TCP reno registered

<6>[    0.071242] UDP hash table entries: 512 (order: 1, 8192 bytes)

<6>[    0.071268] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)

<6>[    0.071459] NET: Registered protocol family 1

<6>[    0.071758] RPC: Registered named UNIX socket transport module.

<6>[    0.071771] RPC: Registered udp transport module.

<6>[    0.071780] RPC: Registered tcp transport module.

<6>[    0.071788] RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>[    0.071945] Trying to unpack rootfs image as initramfs...

<6>[    0.137432] Freeing initrd memory: 860K

<7>[    0.137536] [pm]aw_pm_init!

<7>[    0.154453] highmem bounce pool size: 64 pages

<6>[    0.154704] ashmem: initialized

<5>[    0.160436] VFS: Disk quotas dquot_6.5.2

<7>[    0.160590] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

<6>[    0.163752] NTFS driver 2.1.30 [Flags: R/W].

<6>[    0.164189] fuse init (API version 7.16)

<6>[    0.164806] msgmni has been set to 860

<4>[    0.165287] cryptomgr_test used greatest stack depth: 6672 bytes left

<4>[    0.165708] cryptomgr_test used greatest stack depth: 6480 bytes left

<4>[    0.167854] cryptomgr_test used greatest stack depth: 6388 bytes left

<4>[    0.168947] cryptomgr_test used greatest stack depth: 6280 bytes left

<6>[    0.169417] alg: No test for stdrng (krng)

<6>[    0.169623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

<6>[    0.169639] io scheduler noop registered

<6>[    0.169648] io scheduler deadline registered

<6>[    0.169725] io scheduler cfq registered (default)

<6>[    0.170492] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

<6>[    0.192407] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A

<6>[    0.866101] console [ttyS0] enabled

<6>[    0.890036] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A

<7>[    0.897489] G2D: drv_g2d_init

<6>[    0.900500] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000

<6>[    0.906242] G2D: head:d8000000,tail:d9000000

<6>[    0.910558] G2D: Module initialized.major:251

<6>[    0.915479] brd: module loaded

<6>[    0.920630] loop: module loaded

<7>[    0.923781] [NAND]nand driver, init.

<7>[    0.927389] [NAND] nand gpio_request

<7>[    0.931021] [NAND] nand driver version: 0x2 0x9

<7>[    0.935647] nand interrupte register ok

<7>[    0.939485] ret of NFC_ChangMode is 0

<7>[    0.943251] dma_hdle  is 0

<7>[    0.946045] dma_hdle  is 10000008

<7>[    0.993972] The 0 disk name = bootloader, class name = DISK, disk size = 32768

<7>[    1.001251] The 1 disk name = env, class name = DISK, disk size = 4096

<7>[    1.007774] The 2 disk name = boot, class name = DISK, disk size = 65536

<7>[    1.014502] The 3 disk name = system, class name = DISK, disk size = 800000

<7>[    1.021479] The 4 disk name = data, class name = DISK, disk size = 2097152

<7>[    1.028347] The 5 disk name = misc, class name = DISK, disk size = 2048

<7>[    1.034974] The 6 disk name = recovery, class name = DISK, disk size = 65536

<7>[    1.042036] The 7 disk name = cache, class name = DISK, disk size = 524288

<7>[    1.048904] The 8 disk name = UDISK, class name = DISK, disk size = 0

<7>[    1.055357] The 8 disk size = 12364544

<7>[    1.059102] part total count = 9

<6>[    1.064003]  nanda:

<6>[    1.067903]  nandb: unknown partition table

<6>[    1.073925]  nandc: unknown partition table

<6>[    1.080223]  nandd: unknown partition table

<6>[    1.315496]  nande: unknown partition table

<6>[    1.321461]  nandf: unknown partition table

<6>[    1.327359]  nandg: unknown partition table

<6>[    1.565966]  nandh: unknown partition table

<6>[    1.571759]  nandi: nandi1

<6>[    1.574760] benn: nand probe enter

<7>[    1.578196] [NAND]nand driver, ok.

<6>[    1.581948] PPP generic driver version 2.4.2

<6>[    1.586401] PPP Deflate Compression module registered

<6>[    1.591507] PPP BSD Compression module registered

<6>[    1.597298] PPP MPPE Compression module registered

<6>[    1.602210] NET: Registered protocol family 24

<6>[    1.606689] PPTP driver version 0.8.5

<6>[    1.610729] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c

<3>[    1.618346] can't get information emac_power gpio

<6>[    1.623136] [EMAC] ahb clk enable

<6>[    1.626538] [EMAC] ahb gate clk: 0x26040

<7>[    1.640653] wemac wemac.0: PHY SETUP, reg 0 value: 0

<4>[    1.645616] emac MAC isn't valid!

<7>[    1.649923] wemac wemac.0: resetting device

<7>[    1.654842] release temp resource

<6>[    1.658209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.664813] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

<7>[    1.671221] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0871594

<7>[    1.678963] [sw-ehci1]: open clock

<7>[    1.702351] [sw-ehci1]: Set USB Power ON

<6>[    1.706277] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.713790] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2

<6>[    1.720939] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000

<6>[    1.740052] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00

<6>[    1.745970] hub 2-0:1.0: USB hub found

<6>[    1.749734] hub 2-0:1.0: 1 port detected

<7>[    1.754040] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc08716a4

<7>[    1.761815] [sw-ohci1]: open clock

<6>[    1.785171] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver

<6>[    1.792337] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3

<6>[    1.799411] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400

<6>[    1.864469] hub 3-0:1.0: USB hub found

<6>[    1.868231] hub 3-0:1.0: 1 port detected

<7>[    1.872525] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08717b8

<7>[    1.880295] [sw-ehci2]: open clock

<7>[    1.903648] [sw-ehci2]: Set USB Power ON

<6>[    1.907571] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.915079] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4

<6>[    1.922215] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000

<6>[    1.940044] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00

<7>[    1.945443] ehci_irq: port change detect

<6>[    1.949750] hub 4-0:1.0: USB hub found

<6>[    1.953541] hub 4-0:1.0: 1 port detected

<7>[    1.957750] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08718c8

<7>[    1.965519] [sw-ohci2]: open clock

<6>[    1.988952] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver

<6>[    1.996120] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5

<6>[    2.003212] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400

<6>[    2.064406] hub 5-0:1.0: USB hub found

<6>[    2.068166] hub 5-0:1.0: 1 port detected

<6>[    2.072356] Initializing USB Mass Storage driver...

<6>[    2.077386] usbcore: registered new interface driver usb-storage

<6>[    2.083467] USB Mass Storage support registered.

<6>[    2.088138] usbcore: registered new interface driver ums-alauda

<6>[    2.094132] usbcore: registered new interface driver ums-cypress

<6>[    2.100202] usbcore: registered new interface driver ums-datafab

<6>[    2.106242] usbcore: registered new interface driver ums_eneub6250

<6>[    2.112479] usbcore: registered new interface driver ums-freecom

<6>[    2.118526] usbcore: registered new interface driver ums-isd200

<6>[    2.124503] usbcore: registered new interface driver ums-jumpshot

<6>[    2.130652] usbcore: registered new interface driver ums-karma

<6>[    2.136522] usbcore: registered new interface driver ums-onetouch

<6>[    2.142690] usbcore: registered new interface driver ums-realtek

<6>[    2.148731] usbcore: registered new interface driver ums-sddr09

<6>[    2.154790] usbcore: registered new interface driver ums-sddr55

<6>[    2.160778] usbcore: registered new interface driver ums-usbat

<6>[    2.166719] usbcore: registered new interface driver usbserial

<6>[    2.172603] usbserial: USB Serial Driver core

<6>[    2.176996] USB Serial support registered for GSM modem (1-port)

<6>[    2.270056] usb 4-1: new high speed USB device number 2 using sw-ehci

<6>[    2.422925] usbcore: registered new interface driver option

<6>[    2.428498] option: v0.7.2:USB Driver for GSM modems

<7>[    2.433543] ------print_msc_config-----

<7>[    2.437377] vendor_id             = 0x18d1

<7>[    2.441495] mass_storage_id       = 0x1

<7>[    2.445335] adb_id                = 0x2

<7>[    2.449167] usb_manufacturer_name = USB Developer

<7>[    2.453886] usb_product_name      = Android

<7>[    2.458065] usb_serial_number     = 20080411

<7>[    2.462349] msc_vendor_name       = USB 2.0

<7>[    2.466527] msc_product_name      = USB Flash Driver

<7>[    2.471505] msc_release           = 100

<7>[    2.475337] luns                  = 2

<7>[    2.478994] ---------------------------

<7>[    2.483013] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'

<7>[    2.489640] [sw_udc]: alloc request: ep(0xc079db60, ep0, 64), req(0xe7bd1a40)

<7>[    2.496816] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<7>[    2.504844] [sw_udc]: sw_udc_pullup, is_on = 0

<7>[    2.509297] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[    2.518597] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[    2.525512] android_usb gadget: Number of LUNs=2

<6>[    2.530150]  lun0: LUN: removable file: (no medium)

<6>[    2.535025]  lun1: LUN: removable file: (no medium)

<7>[    2.539913] lun name: lun

<7>[    2.542572] lun name: lun1

<7>[    2.545481] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[    2.553526] android_usb gadget: android_usb ready

<6>[    2.558357] mousedev: PS/2 mouse device common for all mice

<6>[    2.564243] input: sun4i-keyboard as /devices/virtual/input/input0

<7>[    2.570592] ==register_early_suspend =

<7>[    2.574828] sunxi RTC version 0.1

<6>[    2.578363] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881

<6>[    2.584905] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime

<6>[    2.589697] sunxi-rtc sunxi-rtc: read time 2012-6-30 12:53:50

<6>[    2.595686] using rtc device, rtc, for alarms

<6>[    2.599900] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0

<6>[    2.606240] i2c /dev entries driver

<7>[    2.609834] !!! base_Addr = 0xe8912c00

<7>[    2.613706] config i2c gpio with gpio_config api

<7>[    2.618449] twi0, apb clock = 24000000

<6>[    2.623681] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected

<7>[    2.630105] [AXP]axp driver uning configuration failed(324)

<7>[    2.635674] [AXP]power_start = 0

<6>[    2.638909] I2C: i2c-0: AW16XX I2C adapter

<7>[    2.643026] **********start************

<7>[    2.646858] 0x40

<7>[    2.648782] 0xf8

<7>[    2.650724] 0x28

<7>[    2.652647] 0x0

<7>[    2.654484] 0x0

<7>[    2.656319] **********end************

<7>[    2.660038] !!! base_Addr = 0xe8914000

<7>[    2.663909] twi1, apb clock = 24000000

<6>[    2.667933] I2C: i2c-1: AW16XX I2C adapter

<7>[    2.672055] **********start************

<7>[    2.675889] 0x40

<7>[    2.677811] 0xf8

<7>[    2.679734] 0x58

<7>[    2.681676] 0x0

<7>[    2.683513] 0x0

<7>[    2.685349] **********end************

<7>[    2.689039] !!! base_Addr = 0xe8916400

<7>[    2.692926] twi2, apb clock = 24000000

<6>[    2.696930] I2C: i2c-2: AW16XX I2C adapter

<7>[    2.701048] **********start************

<7>[    2.704880] 0x40

<7>[    2.706803] 0xf8

<7>[    2.708726] 0x58

<7>[    2.710668] 0x0

<7>[    2.712505] 0x0

<7>[    2.714341] **********end************

<6>[    2.718127] lirc_dev: IR Remote Control driver registered, major 249

<6>[    2.724588] IR NEC protocol handler initialized

<6>[    2.729114] IR RC5(x) protocol handler initialized

<6>[    2.733920] IR RC6 protocol handler initialized

<6>[    2.738446] IR JVC protocol handler initialized

<6>[    2.742991] IR Sony protocol handler initialized

<6>[    2.747603] IR RC5 (streamzap) protocol handler initialized

<6>[    2.753188] IR LIRC bridge handler initialized

<6>[    2.757627] Linux video capture interface: v2.00

<7>[    2.762282] [cedar dev]: install start!!!

<7>[    2.766656] [cedar dev]: install end!!!

<7>[    2.770521] [ace_drv] start!!!

<7>[    2.773848] [ace_drv] init end!!!

<7>[    2.777162] [pa_drv] start!!!

<7>[    2.780395] [pa_drv] init end!!!

<6>[    2.783730] print_constraints: axp20_ldo1: 1300 mV

<6>[    2.789568] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV

<6>[    2.797244] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV

<6>[    2.804802] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV

<6>[    2.812455] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV

<6>[    2.820107] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV

<6>[    2.827214] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV

<6>[    2.834389] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1

<7>[    2.848900] [AXP]axp driver uning configuration failed(1827)

<7>[    2.854585] [AXP]pmu_suspendpwroff_vol = 3500

<7>[    2.860505] pmu_pekoff_time = 6000

<7>[    2.863907] pmu_pekoff_en = 1

<7>[    2.866871] pmu_peklong_time = 1500

<7>[    2.870376] pmu_pekon_time = 1000

<7>[    2.873687] pmu_pwrok_time = 64

<7>[    2.876825] pmu_pwrnoe_time = 2000

<7>[    2.880242] pmu_intotp_en = 1

<7>[    2.883686] [AXP]POWER20_OFF_CTL:1891-->0x42

<7>[    2.888428] POWER20_PEK_SET:1908-->0x9d

<7>[    2.892758] POWER20_PEK_SET:1919-->0x9d

<7>[    2.897067] POWER20_PEK_SET:1928-->0x9d

<7>[    2.901396] POWER20_PEK_SET:1939-->0x9d

<7>[    2.905706] POWER20_PEK_SET:1951-->0x9d

<7>[    2.910032] POWER20_HOTOVER_CTL:1960-->0xad

<7>[    2.917571] [AXP]last_rest_vol = 86, now_rest_vol	= 86

<7>[    2.924279] [AXP]Cur_CoulombCounter	= 324

<7>[    2.928289] [AXP]charger->rest_vol = 12

<6>[    2.935082] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

<6>[    2.943954] device-mapper: multipath: version 1.3.0 loaded

<6>[    2.949439] device-mapper: multipath round-robin: version 1.0.0 loaded

<6>[    2.956015] device-mapper: multipath queue-length: version 0.1.0 loaded

<6>[    2.962646] device-mapper: multipath service-time: version 0.2.0 loaded

<6>[    2.969535] Bluetooth: HCI UART driver ver 2.2

<6>[    2.974006] Bluetooth: HCI H4 protocol initialized

<6>[    2.978793] Bluetooth: HCI BCSP protocol initialized

<6>[    2.983773] Bluetooth: HCILL protocol initialized

<7>[    2.988698] [mmc_pm]: no sdio card used in configuration

<7>[    2.994053] [mmc]: sunximmc_init

<7>[    2.997562] [mmc]: sunxi mmc controller using config : 0xb

<7>[    3.003140] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0

<7>[    3.009603] [mmc]: mmc 0 power off !!

<7>[    3.013399] [mmc]: mmc0 Probe: base:0xe891e000 irq:32 dma:0 pdes:0xe703c000, ret 0.

<7>[    3.021096] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1

<7>[    3.027497] [mmc]: mmc 1 power off !!

<7>[    3.031261] [mmc]: mmc1 Probe: base:0xe8920000 irq:33 dma:0 pdes:0xe7040000, ret 0.

<7>[    3.038927] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3

<7>[    3.045346] [mmc]: mmc 3 power off !!

<7>[    3.049078] [mmc]: mmc3 Probe: base:0xe8922000 irq:35 dma:0 pdes:0xe7044000, ret 0.

<6>[    3.057419] usbcore: registered new interface driver usbhid

<6>[    3.063019] usbhid: USB HID core driver

<6>[    3.067251] logger: created 256K log 'log_main'

<6>[    3.071926] logger: created 256K log 'log_events'

<6>[    3.076712] logger: created 256K log 'log_radio'

<6>[    3.081433] logger: created 256K log 'log_system'

<7>[    3.086710] enter sun4i Audio codec!!!

<6>[    3.091215] sun4i audio support initialized

<7>[    3.095496] audiocodec_adap_awxx_init: script_parser_fetch err.

<7>[    3.101646] sun4i Audio codec successfully loaded..

<6>[    3.107666] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok

<6>[    3.113540] ALSA device list:

<6>[    3.116508]   #0: sun4i-CODEC  Audio Codec

<6>[    3.120636]   #1: sun4i-sndhdmi

<6>[    3.124027] Netfilter messages via NETLINK v0.30.

<6>[    3.128802] nf_conntrack version 0.5.0 (13026 buckets, 52104 max)

<6>[    3.135436] ctnetlink v0.93: registering with nfnetlink.

<6>[    3.140778] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[    3.147733] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[    3.153816] IPv4 over IPv4 tunneling driver

<6>[    3.158309] GRE over IPv4 demultiplexor driver

<6>[    3.162620] GRE over IPv4 tunneling driver

<6>[    3.167399] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    3.172914] TCP cubic registered

<6>[    3.176140] Initializing XFRM netlink socket

<6>[    3.181171] NET: Registered protocol family 10

<6>[    3.186412] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[    3.192006] IPv6 over IPv4 tunneling driver

<6>[    3.196984] NET: Registered protocol family 17

<6>[    3.201492] NET: Registered protocol family 15

<6>[    3.206094] Bluetooth: RFCOMM TTY layer initialized

<6>[    3.211068] Bluetooth: RFCOMM socket layer initialized

<6>[    3.216204] Bluetooth: RFCOMM ver 1.11

<6>[    3.219951] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    3.225284] Bluetooth: BNEP filters: protocol multicast

<6>[    3.230534] L2TP core driver, V2.0

<6>[    3.233948] PPPoL2TP kernel driver, V2.0

<6>[    3.237869] L2TP IP encapsulation support (L2TPv3)

<6>[    3.242764] L2TP netlink interface

<6>[    3.246190] L2TP ethernet pseudowire support (L2TPv3)

<7>[    3.251658] [mmc_pm]: No sdio card, please check your config !!

<6>[    3.257615] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3

<4>[    3.266263] [LCD] lcd_module_init

<4>[    3.910035] [DISP] *****************************************************************

<4>[    3.917794] [DISP] ***

<4>[    3.920185] [DISP] *** LCD Panel Parameter Check

<4>[    3.924809] [DISP] ***

<4>[    3.927176] [DISP] ***             by dulianping

<4>[    3.931832] [DISP] ***

<4>[    3.934201] [DISP] *****************************************************************

<4>[    3.941965] [DISP] ***

<4>[    3.944419] [DISP] *** Interface:

<4>[    3.947572] [DISP] *** 18Bit LVDS Panel

<4>[    3.951617] [DISP] *** Lcd Frm Disable

<4>[    3.955373] [DISP] ***

<4>[    3.957828] [DISP] *** Timing:

<4>[    3.960908] [DISP] *** lcd_x:      1024

<4>[    3.964756] [DISP] *** lcd_y:      768

<4>[    3.968513] [DISP] *** lcd_ht:     2084

<4>[    3.972375] [DISP] *** lcd_hbp:    320

<4>[    3.976131] [DISP] *** lcd_vt:     1600

<4>[    3.979978] [DISP] *** lcd_vbp:    20

<4>[    3.983668] [DISP] *** lcd_hspw:   0

<4>[    3.987251] [DISP] *** lcd_vspw:   0

<4>[    3.990853] [DISP] *** lcd_frame_frq:  59Hz

<4>[    3.995044] [DISP] ***

<4>[    3.997503] [DISP] *** WRN01: Recommend "lcd_frm = 1"

<4>[    4.002584] [DISP] ***

<4>[    4.005038] [DISP] *** LCD Panel Parameter Check End

<4>[    4.010037] [DISP] *****************************************************************

<4>[    4.024028] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on

<4>[    4.032078] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on

<4>[    4.040077] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on

<4>[    4.047984] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on

<4>[    4.055931] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on

<6>[    4.063931] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime

<6>[    4.068723] sunxi-rtc sunxi-rtc: read time 2012-6-30 12:53:51

<6>[    4.074503] sunxi-rtc sunxi-rtc: setting system clock to 2012-06-30 12:53:51 UTC (1341060831)

<6>[    4.083347] Freeing init memory: 156K

<3>[    4.151986] init: width = 1024

<3>[    4.155052] init: height = 768

<3>[    4.158109] init: s.st_size = 3145728

<6>[    4.195718] init: command 'loglevel' r=0

<6>[    4.199668] init: command 'export' r=0

<6>[    4.203462] init: command 'export' r=0

<6>[    4.207214] init: command 'export' r=0

<6>[    4.210989] init: command 'export' r=0

<6>[    4.214752] init: command 'export' r=0

<6>[    4.218504] init: command 'export' r=0

<6>[    4.222278] init: command 'export' r=0

<6>[    4.226030] init: command 'export' r=0

<6>[    4.229782] init: command 'export' r=0

<6>[    4.233622] init: command 'symlink' r=0

<6>[    4.237486] init: command 'symlink' r=0

<6>[    4.241375] init: command 'symlink' r=0

<6>[    4.245236] init: command 'mkdir' r=0

<6>[    4.249368] init: command 'mount' r=-1

<6>[    4.253261] init: command 'mkdir' r=0

<6>[    4.256951] init: command 'mkdir' r=0

<6>[    4.260690] init: command 'mkdir' r=0

<6>[    4.264389] init: command 'mkdir' r=0

<6>[    4.268070] init: command 'mkdir' r=0

<6>[    4.271803] init: command 'mkdir' r=0

<6>[    4.275487] init: command 'mkdir' r=0

<6>[    4.279176] init: command 'mkdir' r=0

<6>[    4.282900] init: command 'mkdir' r=0

<6>[    4.286668] init: command 'mount' r=0

<6>[    4.290387] init: command 'mkdir' r=0

<6>[    4.294116] init: command 'mount' r=0

<6>[    4.297883] init: command 'write' r=0

<6>[    4.301641] init: command 'write' r=-2

<6>[    4.305449] init: command 'write' r=0

<6>[    4.309150] init: command 'write' r=0

<6>[    4.312893] init: command 'write' r=0

<6>[    4.316595] init: command 'write' r=-2

<6>[    4.320404] init: command 'write' r=0

<6>[    4.324088] init: command 'mkdir' r=0

<6>[    4.328097] init: command 'mount' r=-1

<6>[    4.331959] init: command 'chown' r=0

<6>[    4.335641] init: command 'chown' r=-2

<6>[    4.339403] init: command 'chmod' r=-2

<6>[    4.343281] init: command 'write' r=0

<6>[    4.346975] init: command 'mkdir' r=0

<6>[    4.350699] init: command 'chown' r=-2

<6>[    4.354463] init: command 'chmod' r=-2

<6>[    4.358260] init: command 'write' r=0

<6>[    4.361989] init: command 'mkdir' r=0

<6>[    4.365672] init: command 'chown' r=-2

<6>[    4.369434] init: command 'chmod' r=-2

<6>[    4.373263] init: command 'write' r=0

<6>[    4.376940] init: command 'chmod' r=0

<6>[    4.380665] init: processing action 0x30610 (fs)

<6>[    4.397192] EXT4-fs (nandd): barriers disabled

<6>[    4.403938] EXT4-fs (nandd): recovery complete

<6>[    4.408393] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0

<6>[    4.416575] init: command 'mount' r=0

<6>[    4.420318] init: command 'wait' r=0

<6>[    4.435624] EXT4-fs (nande): barriers disabled

<7>[    4.815837] PHY_PageRead : too much ecc err,bank 1 block 3c3,page 37

<7>[    4.827432] PHY_PageRead : too much ecc err,bank 1 block 3c3,page 3b

<6>[    5.482956] EXT4-fs (nande): recovery complete

<6>[    5.487483] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0

<6>[    5.495681] init: command 'mount' r=0

<6>[    5.499479] init: command 'setupfs' r=0

<3>[    5.503360] init: do_umount: /data

<6>[    5.510139] init: command 'umount' r=0

<4>[    5.621593] e2fsck used greatest stack depth: 5696 bytes left

<6>[    5.627792] init: command 'exec' r=0

<6>[    5.684823] EXT4-fs (nande): barriers disabled

<6>[    5.690908] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc

<6>[    5.702217] init: command 'exec' r=0

<6>[    5.717566] EXT4-fs (nandh): barriers disabled

<6>[    5.973054] EXT4-fs (nandh): recovery complete

<6>[    5.977581] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0

<6>[    5.985691] init: command 'mount' r=0

<6>[    5.989479] init: command 'setupfs' r=0

<3>[    5.993366] init: do_umount: /cache

<6>[    6.000124] init: command 'umount' r=0

<6>[    6.020168] init: command 'exec' r=0

<6>[    6.038947] EXT4-fs (nandh): barriers disabled

<6>[    6.044925] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc

<6>[    6.056234] init: command 'exec' r=0

<3>[    6.061435] init: dont need format /dev/block/nandi

<6>[    6.066149] init: command 'format_userdata' r=1

<6>[    6.070943] init: processing action 0x2b098 (post-fs)

<6>[    6.076093] init: command 'chown' r=0

<6>[    6.079779] init: command 'chmod' r=0

<6>[    6.318323] init: command 'chown' r=0

<6>[    6.322075] init: command 'chmod' r=0

<6>[    6.325801] init: command 'chown' r=0

<6>[    6.329500] init: command 'chmod' r=0

<6>[    6.333256] init: command 'chown' r=0

<6>[    6.336944] init: command 'chmod' r=0

<6>[    6.340684] init: command 'chown' r=0

<6>[    6.344370] init: command 'chmod' r=0

<6>[    6.348099] init: command 'mkdir' r=0

<6>[    6.351830] init: processing action 0x2b288 (post-fs-data)

<6>[    6.357359] init: command 'chown' r=0

<6>[    6.361081] init: command 'chmod' r=0

<6>[    6.377264] init: command 'mkdir' r=0

<6>[    6.381022] init: command 'copy' r=-1

<6>[    6.385927] init: command 'chown' r=-2

<6>[    6.389709] init: command 'chmod' r=-2

<6>[    6.393510] init: command 'copy' r=-1

<6>[    6.397194] init: command 'chown' r=-2

<6>[    6.400975] init: command 'chmod' r=-2

<6>[    6.404752] init: command 'write' r=-2

<6>[    6.419870] init: command 'mkdir' r=0

<6>[    6.424916] init: command 'mkdir' r=0

<6>[    6.428650] init: command 'mkdir' r=0

<6>[    6.432411] init: command 'mkdir' r=0

<6>[    6.436121] init: command 'mkdir' r=0

<6>[    6.439842] init: command 'mkdir' r=0

<6>[    6.443581] init: command 'mkdir' r=0

<6>[    6.447294] init: command 'mkdir' r=0

<6>[    6.452133] init: command 'mkdir' r=0

<6>[    6.455856] init: command 'chmod' r=0

<6>[    6.459585] init: command 'mkdir' r=0

<6>[    6.463299] init: command 'chown' r=0

<6>[    6.467031] init: command 'mkdir' r=0

<6>[    6.470783] init: command 'chmod' r=0

<6>[    6.475583] init: command 'chmod' r=0

<6>[    6.479296] init: command 'chmod' r=0

<6>[    6.483024] init: command 'chmod' r=0

<6>[    6.486720] init: command 'chmod' r=0

<6>[    6.500718] init: command 'mkdir' r=0

<6>[    6.505699] init: command 'mkdir' r=0

<6>[    6.520350] init: command 'mkdir' r=0

<6>[    6.534078] init: command 'mkdir' r=0

<6>[    6.548115] init: command 'mkdir' r=0

<6>[    6.562154] init: command 'mkdir' r=0

<6>[    6.565910] init: command 'mkdir' r=0

<6>[    6.569653] init: command 'mkdir' r=0

<6>[    6.573453] init: command 'mkdir' r=0

<6>[    6.577138] init: command 'chown' r=0

<6>[    6.580861] init: command 'chmod' r=0

<6>[    6.584575] init: command 'mkdir' r=0

<6>[    6.588292] init: command 'mkdir' r=0

<6>[    6.592134] init: command 'chown' r=0

<6>[    6.595852] init: command 'chmod' r=0

<6>[    6.599557] init: command 'chown' r=0

<6>[    6.603288] init: command 'chmod' r=0

<6>[    6.606963] init: processing action 0x30e38 (property_service_init)

<6>[    6.621396] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'

<6>[    6.630608] init: command 'property_service_init' r=0

<6>[    6.635677] init: processing action 0x30e80 (signal_init)

<6>[    6.641183] init: command 'signal_init' r=0

<6>[    6.645373] init: processing action 0x30ec8 (check_startup)

<6>[    6.651004] init: command 'check_startup' r=0

<6>[    6.655378] init: processing action 0x2ba78 (boot)

<6>[    6.661414] init: command 'chown' r=0

<6>[    6.665110] init: command 'chmod' r=0

<6>[    6.670188] init: command 'ifup' r=0

<6>[    6.673883] init: command 'hostname' r=0

<6>[    6.677848] init: command 'domainname' r=0

<6>[    6.682013] init: command 'setrlimit' r=0

<6>[    6.686080] init: command 'write' r=0

<6>[    6.689806] init: command 'write' r=0

<6>[    6.693610] init: command 'chown' r=0

<6>[    6.697301] init: command 'chmod' r=0

<6>[    6.701051] init: command 'chown' r=0

<6>[    6.704733] init: command 'chmod' r=0

<4>[    6.708468] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<6>[    6.717119] init: command 'write' r=0

<6>[    6.720854] init: command 'write' r=0

<6>[    6.724557] init: command 'write' r=0

<6>[    6.728240] init: command 'chown' r=-2

<6>[    6.732039] init: command 'chown' r=-2

<6>[    6.735802] init: command 'chown' r=-2

<6>[    6.739570] init: command 'chown' r=-2

<6>[    6.743357] init: command 'chown' r=-2

<6>[    6.747138] init: command 'chown' r=0

<6>[    6.750847] init: command 'chown' r=0

<6>[    6.754537] init: command 'chown' r=0

<6>[    6.758221] init: command 'chmod' r=0

<6>[    6.761922] init: command 'chmod' r=0

<6>[    6.765600] init: command 'chmod' r=0

<6>[    6.769300] init: command 'chown' r=0

<6>[    6.773015] init: command 'chmod' r=0

<6>[    6.776706] init: command 'chown' r=-2

<6>[    6.780546] init: command 'chown' r=-2

<6>[    6.784315] init: command 'chown' r=-2

<6>[    6.788081] init: command 'chown' r=-2

<6>[    6.791901] init: command 'chown' r=-2

<6>[    6.795670] init: command 'chown' r=-2

<6>[    6.799437] init: command 'chown' r=-2

<6>[    6.803241] init: command 'chown' r=-2

<6>[    6.807014] init: command 'chown' r=-2

<6>[    6.810818] init: command 'chown' r=-2

<6>[    6.814584] init: command 'chown' r=-2

<6>[    6.818347] init: command 'chown' r=-2

<6>[    6.822141] init: command 'chown' r=-2

<6>[    6.825906] init: command 'chown' r=-2

<6>[    6.829669] init: command 'chown' r=-2

<6>[    6.833459] init: command 'chown' r=-2

<6>[    6.837224] init: command 'chown' r=-2

<6>[    6.841017] init: command 'chown' r=-2

<6>[    6.844793] init: command 'chown' r=-2

<6>[    6.848580] init: command 'chown' r=0

<6>[    6.852291] init: command 'chown' r=0

<6>[    6.855986] init: command 'chown' r=0

<6>[    6.859669] init: command 'chown' r=0

<6>[    6.863391] init: command 'chown' r=0

<6>[    6.867078] init: command 'chown' r=0

<6>[    6.870804] init: command 'chown' r=0

<6>[    6.874544] init: command 'setprop' r=0

<6>[    6.878425] init: command 'setprop' r=0

<6>[    6.882322] init: command 'setprop' r=0

<6>[    6.886193] init: command 'setprop' r=0

<6>[    6.890096] init: command 'setprop' r=0

<6>[    6.893967] init: command 'setprop' r=0

<6>[    6.897837] init: command 'setprop' r=0

<6>[    6.901714] init: command 'setprop' r=0

<5>[    6.905673] init: starting 'console'

<5>[    6.909622] init: starting 'servicemanager'

<5>[    6.914216] init: starting 'vold'

<6>[    6.917804] init: command 'class_start' r=0

<6>[    6.923746] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'

<5>[    6.932508] init: starting 'netd'

<5>[    6.936244] init: starting 'debuggerd'

<6>[    6.943501] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'

<5>[    6.952887] init: starting 'surfaceflinger'

<5>[    6.958175] init: starting 'zygote'

<5>[    6.962796] init: starting 'drm'

<6>[    6.966222] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'

<6>[    6.975159] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'

<5>[    6.983881] init: starting 'media'

<5>[    6.990516] init: starting 'dbus'

<5>[    6.996310] init: starting 'installd'

<6>[    7.001681] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'

<3>[    7.010873] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

<6>[    7.019701] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'

<5>[    7.029289] init: starting 'keystore'

<5>[    7.033473] init: starting 'u3gmonitor'

<6>[    7.038134] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'

<5>[    7.047157] init: starting 'ril-daemon'

<6>[    7.053171] init: command 'class_start' r=0

<6>[    7.057920] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'

<6>[    7.067591] init: processing action 0x308a0 (boot)

<6>[    7.073308] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'

<6>[    7.162867] ===========================ft5x_ts_init=====================

<6>[    7.180190] ctp_fetch_sysconfig_para.

<3>[    7.190180] ctp_fetch_sysconfig_para: name ssd253x-ts does not match CTP_NAME.

<3>[    7.213971] ft5x_ts

<6>[    7.215958] ft5x_ts_init: err.

<6>[    7.222858] init: command 'insmod' r=-1

<6>[    7.230236] init: command 'insmod' r=-1

<7>[    7.288437] ctp_fetch_sysconfig_para.

<7>[    7.292441] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x48, dirty_addr_buf: 0x48. dirty_addr_buf[1]: 0xfffe

<7>[    7.302994] ctp_fetch_sysconfig_para: ctp_twi_id is 2.

<6>[    7.308265] ctp_fetch_sysconfig_para: screen_max_x = 1024.

<6>[    7.313959] ctp_fetch_sysconfig_para: screen_max_y = 768.

<6>[    7.319475] ctp_fetch_sysconfig_para: revert_x_flag = 0.

<6>[    7.324936] ctp_fetch_sysconfig_para: revert_y_flag = 1.

<6>[    7.330389] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.

<7>[    7.336163] ssd253x_ts_init: after fetch_sysconfig_para:  normal_i2c: 0x48. normal_i2c[1]: 0xfffe

<6>[    7.345390] ctp_detect: Detected chip ssd253x-ts at adapter 2, address 0x48

<7>[    7.352770] ssd253x config IRQ ENT21

<7>[    7.411556] SSL Touchscreen I2C Address: 0x48

<7>[    7.417889] SSL Touchscreen Device ID  : 0x2533

<7>[    7.422700] SSL Touchscreen Version ID : 0x0103

<6>[    7.474624] input: ssd253x-ts as /devices/platform/sun4i-i2c.2/i2c-2/2-0048/input/input2

<6>[    7.483487] init: command 'insmod' r=0

<7>[    7.541896] ===========================goodix_ts_init=====================

<7>[    7.548853] ctp_fetch_sysconfig_para.

<3>[    7.552703] ctp_fetch_sysconfig_para: name ssd253x-ts does not match CTP_NAME.

<3>[    7.560135] Goodix-TSgoodix_ts_init: err.

<6>[    7.564603] init: command 'insmod' r=-1

<6>[    7.618883] =================nt11003 init=====================

<6>[    7.624875] ctp_fetch_sysconfig_para.

<3>[    7.628671] ctp_fetch_sysconfig_para: name ssd253x-ts does not match CTP_NAME.

<3>[    7.636052] nt11003_ts

<6>[    7.638278] ft5x_ts_init: err.

<6>[    7.651707] init: command 'insmod' r=-1

<7>[    7.719453] UMP: UMP device driver  loaded

<6>[    7.726329] init: command 'insmod' r=0

<7>[    7.930242] Mali: mali--2244-rel0!

<7>[    7.941495] Mali: Mali device driver r2p4-02rel0 loaded

<6>[    7.947169] init: command 'insmod' r=0

<7>[    7.967403] ======mma7660_init=========.

<7>[    7.974099] ========gsensor_fetch_sysconfig_para===================

<7>[    7.986108] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe

<7>[    8.003501] gsensor_fetch_sysconfig_para: twi_id is 1.

<7>[    8.008784] mma7660_init: after fetch_sysconfig_para:  normal_i2c: 0x4c. normal_i2c[1]: 0xfffe

<6>[    8.018000] gsensor_detect: Detected chip mma7660 at adapter 1, address 0x4c

<6>[    8.025423] mma7660 probe

<6>[    8.175005] mma7660 1-004c: build time May 16 2012 16:09:56

<6>[    8.181251] input: mma7660 as /devices/virtual/input/input3

<6>[    8.188782] add mma7660 i2c driver

<6>[    8.196971] init: command 'insmod' r=0

<6>[    8.201365] init: command 'mkdir' r=0

<6>[    8.237083] hello, sun4i_vibrator init

<6>[    8.241507] init: command 'insmod' r=0

<6>[    8.245626] init: command 'chmod' r=0

<6>[    8.270777] init: command 'insmod' r=0

<6>[    8.331199] init: command 'insmod' r=0

<6>[    8.352396] init: command 'insmod' r=0

<6>[    8.405643] init: command 'insmod' r=0

<6>[    8.436290] init: command 'insmod' r=0

<6>[    8.495203] init: command 'insmod' r=0

<6>[    8.583311] [CSI]Welcome to CSI driver

<6>[    8.587087] [CSI]csi_init

<6>[    8.631499] [CSI]registered sub device,input_num = 0

<6>[    8.656481] [CSI]registered sub device,input_num = 1

<6>[    8.672022] [CSI]V4L2 device registered as video0

<6>[    8.689029] init: command 'insmod' r=0

<6>[    8.748449] init: command 'insmod' r=0

<6>[    8.783874] usbcore: registered new interface driver asix

<6>[    8.789439] init: command 'insmod' r=0

<6>[    8.828373] usbcore: registered new interface driver qf9700

<6>[    8.834264] init: command 'insmod' r=0

<6>[    8.895508] usbcore: registered new interface driver MOSCHIP usb-ethernet driver

<6>[    8.944936] init: command 'insmod' r=0

<6>[    8.975652] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver

<6>[    8.988135] usbcore: registered new interface driver rtl8150

<6>[    9.012871] init: command 'insmod' r=0

<7>[    9.047984] ========gsensor_fetch_sysconfig_para===================

<3>[    9.054824] gsensor_fetch_sysconfig_para: name mma7660 does not match SENSOR_NAME.

<3>[    9.062569] bma250BMA250_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0

<4>[    9.071821] i2c i2c-0: Invalid probe address 0x00

<4>[    9.076794] i2c i2c-1: Invalid probe address 0x00

<4>[    9.081573] i2c i2c-2: Invalid probe address 0x00

<6>[    9.086455] init: command 'insmod' r=0

<6>[    9.090307] init: processing action 0x30f10 (queue_propety_triggers)

<6>[    9.097274] init: command 'queue_propety_triggers' r=0

<6>[    9.102546] init: processing action 0x2c480 (nonencrypted)

<6>[    9.108102] init: command 'class_start' r=0

<6>[    9.112375] init: processing action 0x2cba8 (property:persist.sys.usb.config=*)

<6>[    9.119842] init: command 'setprop' r=0

<6>[    9.123764] init: processing action 0x2cd78 (property:ro.debuggable=1)

<6>[    9.130428] init: command 'start' r=0

<6>[    9.134136] init: processing action 0x2ff00 (property:sys.usb.config=mass_storage,adb)

<3>[    9.142684] android_usb: already disabled

<6>[    9.146770] init: command 'write' r=0

<6>[    9.150697] init: command 'write' r=0

<6>[    9.154468] init: command 'write' r=0

<6>[    9.158342] init: command 'write' r=0

<7>[    9.162156] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<6>[    9.170584] adb_bind_config

<7>[    9.173409] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<7>[    9.181868] ep_matches, wrn: endpoint already claimed, ep(0xc079dbe0, 0xe7bd9a00, ep2-bulk)

<7>[    9.190273] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<7>[    9.204202] ep_matches, wrn: endpoint already claimed, ep(0xc079dbe0, 0xe7bd9a00, ep2-bulk)

<7>[    9.213320] ep_matches, wrn: endpoint already claimed, ep(0xc079dc20, 0xe7bccf80, ep3-bulk)

<7>[    9.221794] [sw_udc]: alloc request: ep(0xc079dc60, ep4-bulk, 512), req(0xe7339380)

<7>[    9.229724] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339240)

<7>[    9.237527] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe73393c0)

<7>[    9.245340] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339400)

<7>[    9.253149] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339440)

<7>[    9.260963] [sw_udc]: sw_udc_pullup, is_on = 1

<7>[    9.265539] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[    9.273684] init: command 'write' r=0

<5>[    9.277445] init: starting 'adbd'

<6>[    9.281280] init: command 'start' r=0

<6>[    9.285077] init: command 'setprop' r=0

<6>[    9.292728] adb_open

<6>[    9.646185] init: waitpid returned pid 94, status = 00000000

<3>[    9.652030] init: untracked pid 94 exited

<5>[    9.973049] init: starting 'bootanim'

<6>[   17.988456] warning: `zygote' uses 32-bit capabilities (legacy support in use)

<4>[   22.012871] BatteryStats-Wr used greatest stack depth: 5648 bytes left

<6>[   36.240523] request_suspend_state: wakeup (3->0) at 36240475784 (2012-06-30 12:54:23.664785850 UTC)

<6>[   36.715536] acc_open

<6>[   36.717745] acc_release

<7>[   37.505598] sw_usb_enable_hcd: usbc_num = 2

<7>[   37.505613] WRN:L872(drivers/usb/host/ehci_sun4i.c):ERR: not support sw_usb_enable_ehci

<7>[   37.505625] WRN:L758(drivers/usb/host/ohci_sun4i.c):ERR: not support sw_usb_enable_ohci

<7>[   37.505638] rtw driver version=v3.4.1_3418.20120217

<7>[   37.505645] Build at: May 16 2012 16:11:09

<7>[   37.505652] ##########rtw_suspend_lock_init ###########

<7>[   37.505854] register rtw_netdev_ops to netdev_ops

<7>[   37.505868] rtw_wdev_alloc

<7>[   37.508189] CHIP TYPE: RTL8188C_8192C

<7>[   37.508213]

<7>[   37.508217] usb_endpoint_descriptor(0):

<7>[   37.508224] bLength=7

<7>[   37.508229] bDescriptorType=5

<7>[   37.508235] bEndpointAddress=81

<7>[   37.508241] wMaxPacketSize=200

<7>[   37.508246] bInterval=0

<7>[   37.508252] RT_usb_endpoint_is_bulk_in = 1

<7>[   37.508258]

<7>[   37.508262] usb_endpoint_descriptor(1):

<7>[   37.508267] bLength=7

<7>[   37.508272] bDescriptorType=5

<7>[   37.508278] bEndpointAddress=2

<7>[   37.508283] wMaxPacketSize=200

<7>[   37.508289] bInterval=0

<7>[   37.508294] RT_usb_endpoint_is_bulk_out = 2

<7>[   37.508300]

<7>[   37.508304] usb_endpoint_descriptor(2):

<7>[   37.508310] bLength=7

<7>[   37.508314] bDescriptorType=5

<7>[   37.508320] bEndpointAddress=3

<7>[   37.508325] wMaxPacketSize=200

<7>[   37.508331] bInterval=0

<7>[   37.508336] RT_usb_endpoint_is_bulk_out = 3

<7>[   37.508342]

<7>[   37.508345] usb_endpoint_descriptor(3):

<7>[   37.508353] bLength=7

<7>[   37.508358] bDescriptorType=5

<7>[   37.508363] bEndpointAddress=84

<7>[   37.508369] wMaxPacketSize=40

<7>[   37.508374] bInterval=1

<7>[   37.508380] RT_usb_endpoint_is_int_in = 4, Interval = 1

<7>[   37.508388] nr_endpoint=4, in_num=2, out_num=2

<7>[   37.508393]

<7>[   37.508397] USB_SPEED_HIGH

<7>[   37.508611] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.

<7>[   37.508621] RF_Type is 3!!

<7>[   37.508958] EEPROM type is E-FUSE

<7>[   37.508966] ====> ReadAdapterInfo8192C

<7>[   37.509078] Boot from EFUSE, Autoload OK !

<4>[   37.892429] ip6tables used greatest stack depth: 5432 bytes left

<7>[   37.969097] EEPROMVID = 0x0bda

<7>[   37.987068] EEPROMPID = 0x8176

<7>[   37.993443] EEPROMCustomerID : 0x00

<7>[   38.008183] EEPROMSubCustomerID: 0x00

<7>[   38.023953] RT_CustomerID: 0x00

<7>[   38.023970] _ReadMACAddress MAC Address from EFUSE = 48:02:2a:9f:ca:39

<7>[   38.023984] EEPROMRegulatory = 0x0

<7>[   38.023991] _ReadBoardType(0)

<7>[   38.023998] BT Coexistance = disable

<7>[   38.024005] RT_ChannelPlan: 0x0a

<7>[   38.024014] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(1)

<7>[   38.024023] ### PS params=>  power_mgnt(1),usbss_enable(0) ###

<7>[   38.024031] ### AntDivCfg(0)

<7>[   38.024037] readAdapterInfo_8192CU(): REPLACEMENT = 0

<7>[   38.024049] <==== ReadAdapterInfo8192C in 520 ms

<7>[   38.025270] rtw_register_early_suspend

<7>[   38.025345]

<7>[   38.025350]   padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~

<7>[   38.025358]

<7>[   38.025362]   padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~

<7>[   38.025393] rtw_macaddr_cfg MAC Address  = 48:02:2a:9f:ca:39

<7>[   38.025404] MAC Address from pnetdev->dev_addr= 48:02:2a:9f:ca:39

<7>[   38.118449] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0

<6>[   38.119439] usbcore: registered new interface driver rtl8192cu

<7>[   38.132874] +871x_drv - drv_open, bup=0

<7>[   38.137870]  ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B

<7>[   38.137889] FirmwareDownload92C accquire FW from embedded image

<7>[   38.137915] fw_ver=v79, fw_subver=0, sig=0x88c0

<4>[   38.193699] Thread-50 used greatest stack depth: 5128 bytes left

<7>[   38.224870] fw download ok!

<7>[   38.224902] Set RF Chip ID to RF_6052 and RF type to 1T1R.

<7>[   38.667466] IQK:Start!!!

<7>[   38.683475] Path A IQK Success!!

<7>[   38.710004] Path A IQK Success!!

<7>[   38.729349] IQK: final_candidate is 0

<7>[   38.738190] IQK: RegE94=102 RegE9C=10 RegEA4=fc RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0

<7>[   38.738200]  Path A IQ Calibration Success !

<7>[   38.904224] pdmpriv->TxPowerTrackControl = 1

<7>[   38.913840] MAC Address from REG_MACID = 48:02:2a:9f:ca:39

<7>[   38.919356] rtl8192cu_hal_init in 780ms

<7>[   38.923366] MAC Address = 48:02:2a:9f:ca:39

<7>[   38.933020] rtw_cfg80211_init_wiphy:rf_type=3

<7>[   38.937418] -871x_drv - drv_open, bup=1

<7>[   38.942984] cfg80211_rtw_set_power_mgmt

<6>[   38.952862] ADDRCONF(NETDEV_UP): wlan0: link is not ready

<7>[   39.233101] (2)871x_drv - drv_close, bup=1, hw_init_completed=1

<7>[   39.239485] call rtw_indicate_scan_done when drv_close

<7>[   39.244875] rtw_cfg80211_indicate_scan_done without scan req

<7>[   39.250671] -871x_drv - drv_close, bup=1

<5>[   40.066245] init: starting 'wpa_supplicant'

<6>[   40.072197] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'

<7>[   40.308822] +871x_drv - drv_open, bup=1

<7>[   40.312906] -871x_drv - drv_open, bup=1

<7>[   40.317174] cfg80211_rtw_set_power_mgmt

<6>[   40.322313] ADDRCONF(NETDEV_UP): wlan0: link is not ready

<7>[   40.327764] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

<7>[   40.332416] set_mode = IW_MODE_INFRA

<7>[   40.338648] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

<7>[   41.797393] survey done event(b)

<7>[   41.801965] =>rtw_wx_set_essid

<7>[   41.807923] <=rtw_wx_set_essid, ret 0

<7>[   41.808931] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM

<7>[   41.808954] set_mode = IW_MODE_INFRA

<7>[   41.809031] rtw_cfg80211_indicate_scan_done without scan req

<7>[   41.810623]

<7>[   41.810628]  wpa_ie(length:22):

<7>[   41.810639] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02

<7>[   41.810667] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00

<7>[   41.810676] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00

<7>[   41.811656] Set BSSID under fw_state=0x00000008

<7>[   41.811679] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: folger(f0:7d:68:97:68:78) rssi:-69

<7>[   41.811692] rtw_select_and_join_from_scanned_queue: candidate: folger(f0:7d:68:97:68:78)

<7>[   41.811752] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set

<7>[   41.811766] link to Ralink AP

<7>[   41.811788] =>rtw_wx_set_essid

<7>[   41.811795] ssid=folger, len=6

<7>[   41.811809] Set SSID under fw_state=0x00000088

<7>[   41.811817] <=rtw_wx_set_essid, ret 0

<7>[   41.814602] set ch/bw before connected

<7>[   42.015408] link to Ralink AP

<7>[   42.018426] issue_deauth

<7>[   42.024064] OnAuthClient

<7>[   42.024098] network.SupportedRates[0]=82

<7>[   42.024106] network.SupportedRates[1]=84

<7>[   42.024112] network.SupportedRates[2]=8B

<7>[   42.024119] network.SupportedRates[3]=96

<7>[   42.024126] network.SupportedRates[4]=12

<7>[   42.024132] network.SupportedRates[5]=24

<7>[   42.024138] network.SupportedRates[6]=48

<7>[   42.024145] network.SupportedRates[7]=6C

<7>[   42.024151] network.SupportedRates[8]=0C

<7>[   42.024158] network.SupportedRates[9]=18

<7>[   42.024164] network.SupportedRates[10]=30

<7>[   42.024171] network.SupportedRates[11]=60

<7>[   42.024179] bssrate_len = 12

<7>[   42.028444] OnAssocRsp

<7>[   42.028497] report_join_res(2)

<7>[   42.028508] rtw_joinbss_update_network

<7>[   42.028520] +rtw_update_ht_cap()

<7>[   42.028540] rtw_joinbss_update_stainfo

<7>[   42.028557] rtw_cfg80211_indicate_connect

<7>[   42.028760] HW_VAR_BASIC_RATE: BrateCfg(0x15d)

<6>[   42.029873] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

<7>[   42.036298] WMM(0): 0, a42b

<7>[   42.122414] rx bc/mc packets, to perform sw rtw_tkip_decrypt

<7>[   42.122482]

<7>[   42.122486]  recvframe_chkmic:didn't install group key!!!!!!!!!!

<7>[   42.125674] WMM(1): 0, a44f

<7>[   42.126024] WMM(2): 0, 5e4322

<7>[   42.126266] WMM(3): 0, 2f3222

<7>[   42.126405] [HW_VAR_ACM_CTRL] Write 0x0

<7>[   42.126655] HTOnAssocRsp

<7>[   42.129179]

<7>[   42.129188]  ~~~~stastakey:unicastkey

<7>[   42.129938]

<7>[   42.129946]  ~~~~stastakey:groupkey

<7>[   42.130462] ==> rtw_set_key algorithm(2),keyid(1),key_mask(2)

<7>[   42.135769] update raid entry, mask=0xfffff, arg=0x80

<7>[   42.138635] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)

<7>[   42.139497] SetFwRsvdPagePkt

<7>[   42.139568] Set RSVD page location to Fw.

<7>[   42.143504] =>mlmeext_joinbss_event_callback

<5>[   42.215649] init: starting 'dhcpcd_wlan0'

<7>[   42.316508] rtl8192c_dm_RF_Saving(): RF_Save

<7>[   42.603436] OnAction_back

<7>[   42.606079] OnAction_back, action=0

<7>[   42.609594] issue_action_BA, category=3, action=1, status=0

<7>[   46.720867] survey done event(4)

<7>[   46.744642] rtw_cfg80211_indicate_scan_done without scan req

<7>[   47.524516] OnAction_back

<7>[   47.527149] OnAction_back, action=0

<7>[   47.530693] issue_action_BA, category=3, action=1, status=0

<6>[   47.572228] init: processing action 0x2e3d0 (property:sys.boot_completed=1)

<5>[   47.579241] init: starting 'preinstall'

<6>[   47.646977] init: command 'start' r=0

<6>[   47.727709] init: waitpid returned pid 510, status = 00000000

<5>[   47.727733] init: process 'preinstall', pid 510 exited

<5>[   51.395543] init: service 'bootanim' is being killed

<6>[   51.423139] init: waitpid returned pid 134, status = 00000009

<5>[   51.423169] init: process 'bootanim', pid 134 exited

<7>[   52.310285] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[   52.317746] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[   52.322489] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[   52.360044] wlan0: no IPv6 routers present

<7>[   54.310362] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[   54.340953] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[   54.402368] rtl8192c_dm_RF_Saving(): RF_Save

<7>[   56.396778] survey done event(4)

<7>[   56.400185] rtw_cfg80211_indicate_scan_done without scan req

<7>[   64.310287] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[   64.317664] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[   64.322293] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[   66.310471] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[   66.318108] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[   66.330682] rtl8192c_dm_RF_Saving(): RF_Save

<7>[   68.310386] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[   68.322077] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[   68.329401] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[   70.310293] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[   70.317238] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[   72.320792] rtl8192c_dm_RF_Saving(): RF_Save

<7>[   76.310251] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[   76.318133] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[   76.322852] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[   82.310378] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[   82.328199] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[   82.385562] rtl8192c_dm_RF_Saving(): RF_Save

<7>[   86.310331] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[   86.321240] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[   86.325805] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  113.480957] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  113.488384] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  114.326125] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  116.311182] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  116.324255] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  116.328890] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  123.191261] battery vol change: 12->13

<7>[  166.941390] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  166.952667] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  167.756446]

<7>[  167.756534]  ~~~~stastakey:groupkey

<7>[  167.792087] ==> rtw_set_key algorithm(2),keyid(2),key_mask(6)

<7>[  168.328283] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  170.311135] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  170.325388] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  170.332621] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  190.550963] [AXP]battery state change

<7>[  190.556484] charger->usb_valid = 1

<7>[  190.559901] [AXP]event = 0x8

<7>[  190.900144] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  190.906976] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  192.310174] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  192.316023] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  194.560122] set usbcur 0 mA

<7>[  194.560601] set usbvol 4000 mV

<7>[  195.762229] [AXP]battery state change

<7>[  195.769630] charger->usb_valid = 0

<7>[  195.774025] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  195.781173] [AXP]event = 0x4

<7>[  196.798717] [AXP]battery state change

<7>[  196.806692] charger->usb_valid = 1

<7>[  196.806913] [AXP]event = 0x8

<7>[  199.591767] [AXP]battery state change

<7>[  199.597277] charger->usb_valid = 0

<7>[  199.601968] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  199.609033] [AXP]event = 0x4

<7>[  201.116369] [AXP]battery state change

<7>[  201.121957] charger->usb_valid = 1

<7>[  201.125365] [AXP]event = 0x8

<7>[  203.497124] [AXP]battery state change

<7>[  203.502686] charger->usb_valid = 1

<7>[  203.506162] [AXP]event = 0x20

<7>[  203.563465] [AXP]battery state change

<7>[  203.568812] charger->usb_valid = 1

<7>[  203.572243] [AXP]event = 0x400

<7>[  204.736202] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  204.743095] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  204.970955] [AXP]battery state change

<7>[  204.976388] charger->usb_valid = 0

<7>[  204.979794] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  204.986640] [AXP]event = 0x4

<7>[  206.310317] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  206.316210] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  209.617755] [AXP]battery state change

<7>[  209.623751] charger->usb_valid = 1

<7>[  209.627201] [AXP]event = 0x8

<7>[  210.000869] [AXP]battery state change

<7>[  210.011595] charger->usb_valid = 1

<7>[  210.015059] [AXP]event = 0x400

<7>[  213.630044] set usbcur 0 mA

<7>[  213.633131] set usbvol 4000 mV

<7>[  222.215574] [AXP]battery state change

<7>[  222.221721] charger->usb_valid = 0

<7>[  222.225148] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  222.232438] [AXP]event = 0x4

<7>[  223.265808] [AXP]battery state change

<7>[  223.271894] charger->usb_valid = 1

<7>[  223.275787] [AXP]event = 0x8

<7>[  223.649464] [AXP]battery state change

<7>[  223.657521] charger->usb_valid = 1

<7>[  223.661473] [AXP]event = 0x400

<7>[  227.280129] set usbcur 0 mA

<7>[  227.283397] set usbvol 4000 mV

<7>[  237.923287] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  237.935268] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  238.314525] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  239.328906] survey done event(7)

<7>[  239.329121] rtw_cfg80211_indicate_scan_done without scan req

<7>[  240.310228] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  240.317540] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  240.322137] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  243.423742] battery vol change: 13->12

<6>[  244.169355] init: processing action 0x2c740 (property:sys.usb.config=none)

<5>[  244.169385] init: service 'adbd' is being killed

<6>[  244.169478] init: command 'stop' r=0

<7>[  244.169633] [sw_udc]: sw_udc_pullup, is_on = 0

<7>[  244.169645] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<7>[  244.169664] [sw_udc]: free request: ep(0xc079dc60, ep4-bulk, 512), req(0xe7339380)

<7>[  244.169680] [sw_udc]: free request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339240)

<7>[  244.169692] [sw_udc]: free request: ep(0xc079dc20, ep3-bulk, 512), req(0xe73393c0)

<7>[  244.169704] [sw_udc]: free request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339400)

<7>[  244.169722] [sw_udc]: free request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339440)

<6>[  244.169756] init: command 'write' r=0

<6>[  244.169845] init: command 'write' r=0

<6>[  244.169906] init: command 'setprop' r=0

<6>[  244.170714] adb_release

<6>[  244.252996] init: waitpid returned pid 126, status = 00000009

<5>[  244.253015] init: process 'adbd', pid 126 exited

<5>[  244.253031] init: process 'adbd' killing any children in process group

<6>[  244.264464] init: processing action 0x2cba8 (property:persist.sys.usb.config=*)

<6>[  244.264548] init: command 'setprop' r=0

<6>[  244.264583] init: processing action 0x2fde0 (property:sys.usb.config=mass_storage)

<3>[  244.264710] android_usb: already disabled

<6>[  244.264733] init: command 'write' r=0

<6>[  244.264803] init: command 'write' r=0

<6>[  244.264868] init: command 'write' r=0

<6>[  244.264936] init: command 'write' r=0

<7>[  244.265000] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<7>[  244.265016] [sw_udc]: sw_udc_pullup, is_on = 1

<7>[  244.265027] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[  244.265046] init: command 'write' r=0

<6>[  244.265105] init: command 'setprop' r=0

<6>[  247.907296] init: processing action 0x2c740 (property:sys.usb.config=none)

<6>[  247.918044] init: command 'stop' r=0

<7>[  247.922057] [sw_udc]: sw_udc_pullup, is_on = 0

<7>[  247.974463] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[  247.974542] init: command 'write' r=0

<6>[  247.974721] init: command 'write' r=0

<6>[  247.974812] init: command 'setprop' r=0

<6>[  248.018544] init: processing action 0x2cba8 (property:persist.sys.usb.config=*)

<6>[  248.027041] init: command 'setprop' r=0

<6>[  248.031048] init: processing action 0x2ff00 (property:sys.usb.config=mass_storage,adb)

<3>[  248.045146] android_usb: already disabled

<6>[  248.049240] init: command 'write' r=0

<6>[  248.053504] init: command 'write' r=0

<6>[  248.059349] init: command 'write' r=0

<6>[  248.063464] init: command 'write' r=0

<7>[  248.067927] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<6>[  248.067949] adb_bind_config

<7>[  248.067958] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<7>[  248.067969] ep_matches, wrn: endpoint already claimed, ep(0xc079dbe0, 0xe7bd9a00, ep2-bulk)

<7>[  248.067980] ep_matches, wrn: endpoint already claimed, ep(0xc079dba0, 0xe7bd9a00, ep1-bulk)

<7>[  248.068092] ep_matches, wrn: endpoint already claimed, ep(0xc079dbe0, 0xe7bd9a00, ep2-bulk)

<7>[  248.068104] ep_matches, wrn: endpoint already claimed, ep(0xc079dc20, 0xe7bccf80, ep3-bulk)

<7>[  248.068115] [sw_udc]: alloc request: ep(0xc079dc60, ep4-bulk, 512), req(0xe73395c0)

<7>[  248.068127] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe73396c0)

<7>[  248.068139] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339140)

<7>[  248.068151] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339000)

<7>[  248.068162] [sw_udc]: alloc request: ep(0xc079dc20, ep3-bulk, 512), req(0xe7339580)

<7>[  248.068180] [sw_udc]: sw_udc_pullup, is_on = 1

<7>[  248.068190] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active

<6>[  248.068224] init: command 'write' r=0

<5>[  248.068265] init: starting 'adbd'

<6>[  248.068673] init: command 'start' r=0

<6>[  248.068763] init: command 'setprop' r=0

<6>[  248.070998] adb_open

<7>[  249.800223] [AXP]battery state change

<7>[  249.805822] charger->usb_valid = 0

<7>[  249.809264] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  249.816247] [AXP]event = 0x4

<7>[  252.910057] [AXP]battery state change

<7>[  252.915619] charger->usb_valid = 1

<7>[  252.919076] [AXP]event = 0x8

<7>[  253.347310] [AXP]battery state change

<7>[  253.353027] charger->usb_valid = 1

<7>[  253.356479] [AXP]event = 0x400

<7>[  256.920076] set usbcur 0 mA

<7>[  256.923239] set usbvol 4000 mV

<7>[  273.482801] [AXP]-----------in change_flag-----------

<7>[  292.394772] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  292.403058] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  294.350828] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  294.356861] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  297.381259] [AXP]battery state change

<7>[  297.389855] charger->usb_valid = 1

<7>[  297.393581] [AXP]event = 0x40

<7>[  298.233363] [AXP]battery state change

<7>[  298.240994] charger->usb_valid = 1

<7>[  298.244653] [AXP]event = 0x800

<7>[  301.400393] set usbcur 0 mA

<7>[  301.404366] set usbvol 4000 mV

<7>[  308.575446] [AXP]battery state change

<7>[  308.583828] charger->usb_valid = 0

<7>[  308.587265] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  308.607583] [AXP]event = 0x4

<7>[  309.998339] [AXP]battery state change

<7>[  310.003934] charger->usb_valid = 1

<7>[  310.007460] [AXP]event = 0x8

<7>[  311.106731] [AXP]battery state change

<7>[  311.112767] charger->usb_valid = 0

<7>[  311.122554] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[  311.142049] [AXP]event = 0x4

<7>[  322.230627] [AXP]battery state change

<7>[  322.236074] charger->usb_valid = 1

<7>[  322.239619] [AXP]event = 0x8

<7>[  324.270080]

<7>[  324.270091]

<7>[  324.270094] insmod_device_driver

<7>[  324.270099]

<7>[  324.278068] [sw_udc]: sw_usb_device_enable start

<7>[  324.283522] [sw_udc]: usb_vbase  = 0xf1c13000

<7>[  324.287964] [sw_udc]: sram_vbase = 0xf1c00000

<7>[  324.292555] [sw_udc]: open_usb_clock

<7>[  324.321788] [sw_udc]: usbd_stop_work

<7>[  324.325416] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED

<7>[  324.330899] [sw_udc]: usbd_start_work

<7>[  324.334892] [sw_udc]: usbd_start_work

<7>[  324.338630] [sw_udc]: sw_usb_device_enable end

<7>[  324.390341] [sw_udc]: IRQ: suspend

<7>[  324.393766] [sw_udc]: ERR: usb speed is unkown

<7>[  324.500449] [sw_udc]: IRQ: reset

<7>[  324.503700] [sw_udc]: irq: reset happen, throw away all urb

<7>[  324.657977] [sw_udc]:

<7>[  324.660177] +++++++++++++++++++++++++++++++++++++

<7>[  324.665058] [sw_udc]:  usb enter high speed.

<7>[  324.667961] [sw_udc]:

<7>[  324.667961] +++++++++++++++++++++++++++++++++++++

<6>[  324.678766] android_work: sent uevent USB_STATE=CONNECTED

<7>[  324.684216] [sw_udc]: IRQ: reset

<7>[  324.687455] [sw_udc]: irq: reset happen, throw away all urb

<7>[  324.834016] [sw_udc]: Set address 3

<6>[  324.882395] android_usb gadget: high speed config #1: android

<7>[  324.888161] [sw_udc]: ep enable: ep3(0xc079dc20, ep3-bulk, 128, 512)

<7>[  324.892363] [sw_udc]: ep enable: ep4(0xc079dc60, ep4-bulk, 0, 512)

<7>[  324.900802] [sw_udc]: ep enable: ep1(0xc079dba0, ep1-bulk, 128, 512)

<7>[  324.907184] [sw_udc]: ep enable: ep2(0xc079dbe0, ep2-bulk, 0, 512)

<6>[  324.913648] android_work: sent uevent USB_STATE=CONFIGURED

<7>[  324.946522] [sw_udc]: alloc request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b9680)

<7>[  324.964557] [sw_udc]: alloc request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b95c0)

<7>[  324.983385] [sw_udc]: alloc request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b9600)

<7>[  324.991449] [sw_udc]: alloc request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b9640)

<7>[  325.420298] [sw_udc]: IRQ: suspend

<7>[  326.240053] set usbcur 0 mA

<7>[  326.243217] set usbvol 4000 mV

<7>[  326.420238] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  326.429210] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  328.350253] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  328.356118] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  334.808001] [sw_udc]: IRQ: reset

<7>[  334.811253] [sw_udc]: irq: reset happen, throw away all urb

<6>[  334.816976] adb_release

<6>[  334.819840] adb_open

<7>[  334.970217] [sw_udc]: IRQ: reset

<7>[  334.973467] [sw_udc]: irq: reset happen, throw away all urb

<6>[  334.979156] adb_release

<6>[  334.982076] adb_open

<7>[  335.123556] [sw_udc]: Set address 3

<7>[  335.171679] [sw_udc]: ep disable: ep3(0xc079dc20, ep3-bulk, 128, 200)

<7>[  335.178136] [sw_udc]: ep disable: ep4(0xc079dc60, ep4-bulk, 0, 200)

<6>[  335.181658] android_usb gadget: high speed config #1: android

<7>[  335.181658] [sw_udc]: ep enable: ep3(0xc079dc20, ep3-bulk, 128, 512)

<7>[  335.181658] [sw_udc]: ep enable: ep4(0xc079dc60, ep4-bulk, 0, 512)

<7>[  335.202853] [sw_udc]: dequeue: ep(0xc079dbc8, 2), _req(0xe55b95c8, 512, 0)

<7>[  335.209756] [sw_udc]:

<6>[  335.212024] adb_release

<6>[  335.215000] android_work: sent uevent USB_STATE=CONFIGURED

<6>[  335.222340] adb_open

<7>[  335.226732] free request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b9680)

<7>[  335.260973] [sw_udc]: free request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b95c0)

<7>[  335.268591] [sw_udc]: free request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b9600)

<7>[  335.287667] [sw_udc]: free request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b9640)

<7>[  335.296684] [sw_udc]: ep disable: ep1(0xc079dba0, ep1-bulk, 128, 200)

<7>[  335.303470] [sw_udc]: ep disable: ep2(0xc079dbe0, ep2-bulk, 0, 200)

<7>[  335.309785] [sw_udc]: ep enable: ep1(0xc079dba0, ep1-bulk, 128, 512)

<7>[  335.316321] [sw_udc]: ep enable: ep2(0xc079dbe0, ep2-bulk, 0, 512)

<7>[  335.322556] [sw_udc]: alloc request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b9640)

<7>[  335.330388] [sw_udc]: alloc request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b9600)

<7>[  335.338075] [sw_udc]: alloc request: ep(0xc079dba0, ep1-bulk, 512), req(0xe55b95c0)

<7>[  335.345804] [sw_udc]: alloc request: ep(0xc079dbe0, ep2-bulk, 512), req(0xe55b9680)

<7>[  340.204415] WRN:L1364(drivers/usb/sun4i_usb/udc/sw_udc.c):handle_ep0: ep0 setup end

<7>[  343.642498] [AXP]-----------in change_flag-----------

<7>[  403.763734] battery vol change: 12->13

<7>[  554.350268] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  554.357002] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  554.368113] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  556.350280] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  556.357757] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  556.362350] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  558.335438] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  558.342405] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  558.355269] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  560.350236] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  560.357537] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  560.362131] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  625.190237] [pm]valid

<6>[  625.192548] request_suspend_state: sleep (0->3) at 625192537108 (2012-06-30 13:04:12.616849550 UTC)

<7>[  625.201644] rtw_early_suspend

<6>[  625.212686] mma7660 early suspend

<7>[  625.219223] [AXP]======early suspend=======

<7>[  625.255983] [AXP-APP]pmu_earlysuspend_chgcur = 600000

<7>[  625.262233] display early suspend: backlight_early_suspend

<7>[  634.223505] battery vol change: 13->14

<7>[  655.412472] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  655.419422] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  656.354914] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  658.350187] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  658.357301] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  658.361840] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  764.483525] battery vol change: 14->15

<7>[  767.853360]

<7>[  767.853369]  ~~~~stastakey:groupkey

<7>[  767.858349] ==> rtw_set_key algorithm(2),keyid(1),key_mask(6)

<7>[  767.869043] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  767.875916] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  768.354417] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  770.350186] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  770.357300] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  770.361777] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  894.743524] battery vol change: 15->16

<7>[  902.350220] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  902.356963] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  904.350234] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  904.356130] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

<7>[  905.381155] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..

<7>[  905.387989] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0

<7>[  906.354993] rtl8192c_dm_RF_Saving(): RF_Save

<7>[  908.350144] rtw_set_ps_mode(): Enter 802.11 power save mode...

<7>[  908.357255] rtl8192c_dm_RF_Saving(): RF_Normal

<7>[  908.361735] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2