API tools faq
paste
Advertisement
Guest User

HP Proliant Microserver Remote Access Card

a guest
Feb 1st, 2012
672
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.56 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.2.0 (Jul 2 2010 - 17:02:47) Avocent (0.1.8) EVB
  2.  
  3. Board: AST2050
  4. DRAM: 128 MB
  5. Detect S25FL128P Flash
  6. Flash: 16 MB
  7. In: serial
  8. Out: serial
  9. Err: serial
  10. Net: FXN !check
  11. eth#0, ncsi#1
  12. Hit any key to stop autoboot: 0
  13. Copying kernel image ... KERNEL copy to ram OK
  14. Copying rootfs image ... OK
  15. ## Booting image at 41400000 ...
  16. Image Name: arm-linux
  17. Image Type: ARM Linux Kernel Image (gzip compressed)
  18. Data Size: 1613402 Bytes = 1.5 MB
  19. Load Address: 40008000
  20. Entry Point: 40008000
  21. Verifying Checksum ... OK
  22. Uncompressing Kernel Image ... OK
  23.  
  24. Starting kernel ...
  25.  
  26. init started: BusyBox v1.8.2 (2010-08-26 18:02:31 CST)
  27. starting pid 202, tty '': '/etc/init.d/rcS'
  28.  
  29. ========================
  30. Wed Feb 1 18:36:45 UTC 2012
  31. ========================
  32. waitforaim: AIM started sec:1328121410 usec:202923 ended: sec:1328121410 usec::234565 elapsed:0.031642
  33.  
  34. ifconfig: SIOCGIFFLAGS: No such device
  35. ifconfig: SIOCGIFFLAGS: No such device
  36. ifconfig: SIOCGIFFLAGS: No such device
  37. waitforsm: aim_config_get_int failed, SM did not start
  38. killall: udhcpc: no process killed
  39.  
  40. udhcpc (v1.8.2) started
  41. DHCPv4 script:
  42. Command : deconfig
  43. Interface : eth0
  44. IP Address :
  45. Subnet Mask :
  46. Routers :
  47. DNS Servers :
  48. Hostname :
  49. Domain :
  50. Reading committed configuration...
  51. configuring eth0 Link-Local address
  52. deconfig command
  53. Configuration command line: iBMC inet dhcp_renew add 0.0.0.0 netmask 0.0.0.0 route 0.0.0.0 dns1 0.0.0.0 dns2 0.0.0.0
  54. add command
  55. Store IPv4 '0.0.0.0'
  56. eth0 MAC address is : D4:85:64:C9:E8:46
  57. == Requested Network Changes =============
  58. IPv4 DNS Server 1 -> '0.0.0.0'
  59. IPv4 DNS Server 2 -> '0.0.0.0'
  60. -- Interface #0 --------------------
  61. Name ----------------> 'eth0'
  62. DHCPv4 Enabled ------> LAN_TRUE
  63. IPv4 Address --------> '0.0.0.0'
  64. IPv4 Net Mask -------> '0.0.0.0'
  65. IPv4 Gateway --------> '0.0.0.0'
  66. ==========================================
  67. EventCallback() - nEventType:3 szEvent: event_netchange_cfg_request nSize:792
  68. EventCallback() - nEventType:3 szEvent: event_netchange_commit nSize:792
  69. EventCallback() - nEventType:3 szEvent: event_netchange_start nSize:0
  70. avctifconfig - Now waiting for EVENT_NETCHANGE_ACTIVE.
  71. EventCallback() - nEventType:3 szEvent: event_netchange_active nSize:792
  72. avctifconfig - Our changes should now be active.
  73. aim_function_execute() returned success...
  74. Waited for 0 seconds.
  75. Discover_retries : 20
  76. Sending discover...
  77. eth0 Link-Local address is : FE80::d685:64FF:FEC9:E846
  78. Sending select for 192.168.1.11...
  79. ip: RTNETLINK answers: File exists
  80. Lease of 192.168.1.11 obtained, lease time 86400
  81. DHCPv4 script:
  82. Command : bound
  83. Interface : eth0
  84. IP Address : 192.168.1.11
  85. Subnet Mask : 255.255.255.0
  86. Routers : 192.168.1.1
  87. DNS Servers : 192.168.1.1
  88. Hostname : microserver-ipmi
  89. Domain : localdomain
  90. Reading committed configuration...
  91. Updating domain...
  92. ip: an inet address is expected rather than "N/A/N/A"
  93. Configuration command line: iBMC inet dhcp_renew add 192.168.1.11 netmask 255.255.255.0 route 192.168.1.1 domain localdomain dns1 192.168.1.1 dns2 0.0.0.0
  94. add command
  95. Store IPv4 '192.168.1.11'
  96. == Requested Network Changes =============
  97. Domain ------------> 'localdomain'
  98. IPv4 DNS Server 1 -> '192.168.1.1'
  99. IPv4 DNS Server 2 -> '0.0.0.0'
  100. -- Interface #0 --------------------
  101. Name ----------------> 'eth0'
  102. DHCPv4 Enabled ------> LAN_TRUE
  103. IPv4 Address --------> '192.168.1.11'
  104. IPv4 Net Mask -------> '255.255.255.0'
  105. IPv4 Gateway --------> '192.168.1.1'
  106. ==========================================
  107. aim_function_execute() returned success...
  108. Waited for 0 seconds.
  109. ip: RTNETLINK answers: No such process
  110. ip: RTNETLINK answers: No route to host
  111. Log levels currently enabled:
  112. AVCT_LOG_NONE
  113. AVCT_LOG_ERROR
  114. AVCT_LOG_WARNING
  115. SetVideoConfig[1941] Set Mode=1 Y=4 UV=23
  116. avct_init_video_capture[492] Video In Source Buf 2 = 0x46000000[5120K]
  117. avct_init_video_capture[495] Video IN Source Buf 1 = 0x45900000[5120K]
  118. avct_init_video_capture[504] Video Compress Buf Address[0] = 0x45880000[512K]
  119. avct_init_video_capture[511] Video BCD Buf Address = 0x4587D800[10K]
  120. avct_init_video_capture[514] Video CRC Buf Address = 0x45869800[80K]
  121. GetMemoryBandwidth[1831] GetMemoryBandwidth
  122. GetMemoryBandwidth[1832] Numerator = 15
  123. GetMemoryBandwidth[1833] Denumerator = 0
  124. GetMemoryBandwidth[1834] OutputDivider = 1
  125. GetMemoryBandwidth[1835] Buswidth = 16
  126. GetMemoryBandwidth[1836] Memory Clock = 204
  127. GetMemoryBandwidth[1837] Memory Bandwidth = 530
  128. avct_init_video_capture[550] compression buffer address 45880000 mmap to address 4035E000 size 524288
  129. avct_init_video_capture[567] Using Driver's buffer for frame send
  130. create /mnt/scratchpad
  131. VDiskHandler() - Invalid device file for interface exiting...
  132. VDiskHandler() - Invalid device file for interface exiting...
  133. AddStore() - Unknown Image Store 2.
  134. AddStore() - Unknown Image Store 3.
  135. AvmpSend - Client 0, Already closed
  136. Starting debug for AIMLIB-ipmiSystemCallAgent
  137. aim_init() - szComponentName:ipmiSystemCallAgent ulProgNum:536872532
  138. rpcCallbackService() - calling svc_run to wait for rpc callbacks for socket:/tmp/rpSocketCB536872532 in thread ID: 16386 process ID: 674
  139. aim_function_register() - result:0
  140. Success to open IO table bin file IO_fl.bin
  141. Success to open IO sensor table bin file IS_fl.bin
  142. Success to open IO index table bin file IX_fl.bin
  143. HWInitFunctionTable:MakeMemFile() FunctionTable.bin
  144. Success to open device ID bin file ID_devid.bin
  145. Success to open HWINFO FI_fwid.bin
  146. Success to open default value table oemdef.bin
  147. Starting debug for AIMLIB-IPMI
  148. aim_init() - szComponentName:IPMI ulProgNum:536870944
  149.  
  150. rpcCallbackService() - calling svc_run to wait for rpc callbacks for socket:/tmp/rpSocketCB536870944 in thread ID: 49156 process ID: 684
  151. Starting Network Interface Plugging Daemon: eth0update failed: REFUSED
  152. bond0.
  153. update failed: REFUSED
  154.  
  155.  
  156.  
  157. DcmiInit entry!!
  158. Get G_u32DcmiInitMode(2)
  159.  
  160.  
  161.  
  162. Register DCMI_COMMAND_HOOK_TYPE function at 6a590
  163. Register DCMI Command-Hook function
  164. Success to open Virtual PS NVRAM_PrivateStorage00.dat
  165. aim_function_execute() - szFunctionName: netGetCurrentIfConfig g_ulProgNum: 536870944 nReturn:0
  166. aim_function_execute() - szFunctionName: netGetCurrentIfConfig g_ulProgNum: 536870944 nReturn:0
  167. rpc_aim_callback_function_1_svc() - szFunctionName:SystemCallImp nSize:49 nMaxSize: 4
  168. rpc_aim_callback_function_1_svc() - returned from pFunctionCallback result:0
  169. rpc_aim_callback_function_1_svc() - result == SUCCESS, callbackData size: 4
  170. aim_function_execute() - szFunctionName: SystemCallImp g_ulProgNum: 536870944 nReturn:0
  171. rpc_aim_callback_function_1_svc() - szFunctionName:SystemCallImp nSize:51 nMaxSize: 4
  172. rpc_aim_callback_function_1_svc() - returned from pFunctionCallback result:0
  173. rpc_aim_callback_function_1_svc() - result == SUCCESS, callbackData size: 4
  174. aim_function_execute() - szFunctionName: SystemCallImp g_ulProgNum: 536870944 nReturn:0
  175. aim_function_register() - result:0
  176. Success to open Virtual SDR NVRAM_SDR00.dat
  177. creating /tmp/clp
  178. Register all IPMI Gateway APIs successfully.
  179.  
  180. aim_config_get() - returned data length zero, parameter sol_int_idle_timer not found
  181. !!!IPv6BufferInit(139)...
  182. aim_event_callback_register() - nNumEvents:4
  183. aim_event_callback_register() - result:1
  184. aim_event_callback_register() - saving pEventCallback:68be0
  185. IPMI initial costs 6 seconds, 999998409 nanoseconds
  186. Start Nexus ...........................
  187.  
  188. Memory Service: No memory limitation
  189. [NVStorage] Success to init NVStorage subsystem
  190. Abstraction Socket Layer Init Success...
  191. Thread GPTaskHi has been created successfully.
  192. Thread GPTaskLo has been created successfully.
  193. Creating config file.
  194.  
  195. Thread EventingService has been created successfully.
  196. wsman port (5985,5986s)
  197. Thread HTTPService has been created successfully.
  198. cimom port (5988,5989s)
  199. Thread HTTPService2 has been created successfully.
  200. Thread ProviderInitSDR has been created successfully.
  201. Thread CMCITask has been created successfully.
  202. service:wbem:http://192.168.1.11:5988
  203. service:wbem:https://192.168.1.11:5989
  204. Thread SHTTPDService has been created successfully.
  205. Thread SHTTPDService2 has been created successfully.
  206. aim_function_execute() - szFunctionName: netGetCurrentIfConfig g_ulProgNum: 536870944 nReturn:0
  207. service:wbem:http://192.168.1.11:5988
  208. service:wbem:https://192.168.1.11:5989
  209. CIM_Sensor_InstAgent_ReadInitSDR
  210.  
  211. Starting GUIProcessMonitor
  212.  
  213. starting pid 846, tty '': '/sbin/getty'sole.
  214. aim_function_execute() - szFunctionName: netGetCurrentIfConfig g_ulProgNum: 536870944 nReturn:0
  215. service:wbem:http://192.168.1.11:5988
  216. service:wbem:https://192.168.1.11:5989
  217.  
  218. microserver-ipmi login: root
  219. Password: service:wbem:http://192.168.1.11:5988
  220. service:wbem:https://192.168.1.11:5989
  221. aim_function_execute() - szFunctionName: netGetCurrentIfConfig g_ulProgNum: 536870944 nReturn:0
  222.  
  223. [AST2050 ~]$ ki; Communication with fe80::c2c1:c0ff:fe1a:fb66#53 failed: timed out
  224. could not talk to specified name server
  225. llall osinet
  226. [AST2050 ~]$ dmesg
  227. <5>Linux version 2.6.23.1-ASPEED-v.0.11 (root@tw5560dt.nwing.foxconn.com) (gcc version 3.4.5) #26 PREEMPT Thu Aug 26 17:58:31 CST 2010
  228. <4>CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  229. <4>Machine: ASPEED-AST2050
  230. <4>Memory policy: ECC disabled, Data cache writeback
  231. <7>On node 0 totalpages: 27648
  232. <7> DMA zone: 216 pages used for memmap
  233. <7> DMA zone: 0 pages reserved
  234. <7> DMA zone: 27432 pages, LIFO batch:7
  235. <7> Normal zone: 0 pages used for memmap
  236. <7> Movable zone: 0 pages used for memmap
  237. <4>CPU0: D VIVT write-back cache
  238. <4>CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  239. <4>CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  240. <4>Built 1 zonelists in Zone order. Total pages: 27432
  241. <5>Kernel command line: root=/dev/ram0 rw initrd=0x42600000,0xD00000 ramdisk_size=13312 rootfstype=squashfs mem=108M console=ttyS0 quiet
  242. <4>PID hash table entries: 512 (order: 9, 2048 bytes)
  243. <4>Console: colour dummy device 80x30
  244. <6>console [ttyS0] enabled
  245. <6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  246. <6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  247. <6>Memory: 108MB = 108MB total
  248. <5>Memory: 92672KB available (3024K code, 324K data, 116K init)
  249. <7>Calibrating delay loop... 98.71 BogoMIPS (lpj=493568)
  250. <6>Security Framework v1.0.0 initialized
  251. <6>Capability LSM initialized
  252. <4>Mount-cache hash table entries: 512
  253. <6>CPU: Testing write buffer coherency: ok
  254. <7>DEV: registering device: ID = 'platform'
  255. <7>bus type 'platform' registered
  256. <7>Registering sysdev class '<NULL>'
  257. <6>NET: Registered protocol family 16
  258. <7>bus type 'amba' registered
  259. <7>device class 'tty': registering
  260. <7>device class 'vtconsole': registering
  261. <7>DEV: registering device: ID = 'vtcon0'
  262. <7>Registering sys device 'cpu0'
  263. <7>device class 'misc': registering
  264. <7>device class 'input': registering
  265. <7>device class 'net': registering
  266. <7>device class 'mem': registering
  267. <7>DEV: registering device: ID = 'mem'
  268. <7>DEV: registering device: ID = 'kmem'
  269. <7>DEV: registering device: ID = 'null'
  270. <7>DEV: registering device: ID = 'zero'
  271. <7>DEV: registering device: ID = 'full'
  272. <7>DEV: registering device: ID = 'random'
  273. <7>DEV: registering device: ID = 'urandom'
  274. <7>DEV: registering device: ID = 'kmsg'
  275. <6>NET: Registered protocol family 2
  276. <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  277. <6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  278. <6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  279. <6>TCP: Hash tables configured (established 4096 bind 4096)
  280. <6>TCP reno registered
  281. <6>checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
  282. <6>Freeing initrd memory: 13312K
  283. <7>Registering sysdev class '<NULL>'
  284. <7>Registering sys device 'timer0'
  285. <4>NetWinder Floating Point Emulator V0.97 (double precision)
  286. <7>Registering sysdev class '<NULL>'
  287. <7>Registering sys device 'timekeeping0'
  288. <7>Registering sysdev class '<NULL>'
  289. <7>Registering sys device 'clocksource0'
  290. <6>audit: initializing netlink socket (disabled)
  291. <5>audit(0.590:1): initialized
  292. <6>squashfs: version 3.4 (2008/08/26) Phillip Lougher
  293. <6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  294. <4>fuse init (API version 7.8)
  295. <7>DEV: registering device: ID = 'fuse'
  296. <6>io scheduler noop registered
  297. <6>io scheduler deadline registered (default)
  298. <7>DEV: registering device: ID = 'tty'
  299. <7>DEV: registering device: ID = 'console'
  300. <7>DEV: registering device: ID = 'ptmx'
  301. <7>DEV: registering device: ID = 'tty0'
  302. <7>device class 'vc': registering
  303. <7>DEV: registering device: ID = 'vcs'
  304. <7>DEV: registering device: ID = 'vcsa'
  305. <7>DEV: registering device: ID = 'tty1'
  306. <7>DEV: registering device: ID = 'tty2'
  307. <7>DEV: registering device: ID = 'tty3'
  308. <7>DEV: registering device: ID = 'tty4'
  309. <7>DEV: registering device: ID = 'tty5'
  310. <7>DEV: registering device: ID = 'tty6'
  311. <7>DEV: registering device: ID = 'tty7'
  312. <7>DEV: registering device: ID = 'tty8'
  313. <7>DEV: registering device: ID = 'tty9'
  314. <7>DEV: registering device: ID = 'tty10'
  315. <7>DEV: registering device: ID = 'tty11'
  316. <7>DEV: registering device: ID = 'tty12'
  317. <7>DEV: registering device: ID = 'tty13'
  318. <7>DEV: registering device: ID = 'tty14'
  319. <7>DEV: registering device: ID = 'tty15'
  320. <7>DEV: registering device: ID = 'tty16'
  321. <7>DEV: registering device: ID = 'tty17'
  322. <7>DEV: registering device: ID = 'tty18'
  323. <7>DEV: registering device: ID = 'tty19'
  324. <7>DEV: registering device: ID = 'tty20'
  325. <7>DEV: registering device: ID = 'tty21'
  326. <7>DEV: registering device: ID = 'tty22'
  327. <7>DEV: registering device: ID = 'tty23'
  328. <7>DEV: registering device: ID = 'tty24'
  329. <7>DEV: registering device: ID = 'tty25'
  330. <7>DEV: registering device: ID = 'tty26'
  331. <7>DEV: registering device: ID = 'tty27'
  332. <7>DEV: registering device: ID = 'tty28'
  333. <7>DEV: registering device: ID = 'tty29'
  334. <7>DEV: registering device: ID = 'tty30'
  335. <7>DEV: registering device: ID = 'tty31'
  336. <7>DEV: registering device: ID = 'tty32'
  337. <7>DEV: registering device: ID = 'tty33'
  338. <7>DEV: registering device: ID = 'tty34'
  339. <7>DEV: registering device: ID = 'tty35'
  340. <7>DEV: registering device: ID = 'tty36'
  341. <7>DEV: registering device: ID = 'tty37'
  342. <7>DEV: registering device: ID = 'tty38'
  343. <7>DEV: registering device: ID = 'tty39'
  344. <7>DEV: registering device: ID = 'tty40'
  345. <7>DEV: registering device: ID = 'tty41'
  346. <7>DEV: registering device: ID = 'tty42'
  347. <7>DEV: registering device: ID = 'tty43'
  348. <7>DEV: registering device: ID = 'tty44'
  349. <7>DEV: registering device: ID = 'tty45'
  350. <7>DEV: registering device: ID = 'tty46'
  351. <7>DEV: registering device: ID = 'tty47'
  352. <7>DEV: registering device: ID = 'tty48'
  353. <7>DEV: registering device: ID = 'tty49'
  354. <7>DEV: registering device: ID = 'tty50'
  355. <7>DEV: registering device: ID = 'tty51'
  356. <7>DEV: registering device: ID = 'tty52'
  357. <7>DEV: registering device: ID = 'tty53'
  358. <7>DEV: registering device: ID = 'tty54'
  359. <7>DEV: registering device: ID = 'tty55'
  360. <7>DEV: registering device: ID = 'tty56'
  361. <7>DEV: registering device: ID = 'tty57'
  362. <7>DEV: registering device: ID = 'tty58'
  363. <7>DEV: registering device: ID = 'tty59'
  364. <7>DEV: registering device: ID = 'tty60'
  365. <7>DEV: registering device: ID = 'tty61'
  366. <7>DEV: registering device: ID = 'tty62'
  367. <7>DEV: registering device: ID = 'tty63'
  368. <7>DEV: registering device: ID = 'ptyp0'
  369. <7>DEV: registering device: ID = 'ptyp1'
  370. <7>DEV: registering device: ID = 'ptyp2'
  371. <7>DEV: registering device: ID = 'ptyp3'
  372. <7>DEV: registering device: ID = 'ptyp4'
  373. <7>DEV: registering device: ID = 'ptyp5'
  374. <7>DEV: registering device: ID = 'ptyp6'
  375. <7>DEV: registering device: ID = 'ptyp7'
  376. <7>DEV: registering device: ID = 'ttyp0'
  377. <7>DEV: registering device: ID = 'ttyp1'
  378. <7>DEV: registering device: ID = 'ttyp2'
  379. <7>DEV: registering device: ID = 'ttyp3'
  380. <7>DEV: registering device: ID = 'ttyp4'
  381. <7>DEV: registering device: ID = 'ttyp5'
  382. <7>DEV: registering device: ID = 'ttyp6'
  383. <7>DEV: registering device: ID = 'ttyp7'
  384. <7>device class 'raw': registering
  385. <7>DEV: registering device: ID = 'rawctl'
  386. <7>DEV: registering device: ID = 'nvram'
  387. <6>Non-volatile memory driver v1.2
  388. <6>ttyS0 at MMIO 0x1e784000 (irq = 10) is a ASPEED UART
  389. <7>DEV: registering device: ID = 'ttyS0'
  390. <6>ttyS1 at MMIO 0x1e783000 (irq = 9) is a ASPEED UART
  391. <7>DEV: registering device: ID = 'ttyS1'
  392. <4>RAMDISK driver initialized: 1 RAM disks of 13312K size 1024 blocksize
  393. <6>loop: module loaded
  394. <6>nbd: registered device at major 43
  395. <7>DEV: registering device: ID = 'lo'
  396. <4>eth0: at 0xfe660000 IRQ:2 noWait:0, MAC d4:85:64:c9:e8:46
  397. <7>DEV: registering device: ID = 'eth0'
  398. <7>device class 'mtd': registering
  399. <4>SPI Flash ID : 0x3182001
  400. <4>Detect SPI Flash ID : S25FL128P
  401. <5>Creating 4 MTD partitions on "s25fl128p":
  402. <5>0x00000000-0x00040000 : "AST2050 SPI FLASH (U-BOOT)"
  403. <7>CLASS: registering class device: ID = 'mtd0'
  404. <7>class_uevent - name = mtd0
  405. <7>class_device_create_uevent called for mtd0
  406. <7>CLASS: registering class device: ID = 'mtd0ro'
  407. <7>class_uevent - name = mtd0ro
  408. <7>class_device_create_uevent called for mtd0ro
  409. <5>0x00040000-0x00100000 : "AST2050 SPI FLASH (Private Storage)"
  410. <7>CLASS: registering class device: ID = 'mtd1'
  411. <7>class_uevent - name = mtd1
  412. <7>class_device_create_uevent called for mtd1
  413. <7>CLASS: registering class device: ID = 'mtd1ro'
  414. <7>class_uevent - name = mtd1ro
  415. <7>class_device_create_uevent called for mtd1ro
  416. <5>0x00100000-0x00300000 : "AST2050 SPI FLASH (Kernel)"
  417. <7>CLASS: registering class device: ID = 'mtd2'
  418. <7>class_uevent - name = mtd2
  419. <7>class_device_create_uevent called for mtd2
  420. <7>CLASS: registering class device: ID = 'mtd2ro'
  421. <7>class_uevent - name = mtd2ro
  422. <7>class_device_create_uevent called for mtd2ro
  423. <5>0x00300000-0x01000000 : "AST2050 SPI FLASH (Rootfs)"
  424. <7>CLASS: registering class device: ID = 'mtd3'
  425. <7>class_uevent - name = mtd3
  426. <7>class_device_create_uevent called for mtd3
  427. <7>CLASS: registering class device: ID = 'mtd3ro'
  428. <7>class_uevent - name = mtd3ro
  429. <7>class_device_create_uevent called for mtd3ro
  430. <4>Insert SPI NOR Flash module success!
  431. <4>success to register interrupt for INT_WDT (27)
  432. <7>DEV: registering device: ID = 'aess_wdtdrv'
  433. <6>ASPEED WDT is installed.(irq = 27, heartbeat = 10 secs, nowayout = 1)
  434. <4>mknod /dev/aess_wdtdrv c 10 130
  435. <7>bus type 'mmc' registered
  436. <7>device class 'mmc_host': registering
  437. <7>bus mmc: add driver mmcblk
  438. <6>IPv4 over IPv4 tunneling driver
  439. <7>DEV: registering device: ID = 'tunl0'
  440. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  441. <6>TCP cubic registered
  442. <6>NET: Registered protocol family 1
  443. <6>NET: Registered protocol family 10
  444. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  445. <6>IPv6 over IPv4 tunneling driver
  446. <7>DEV: registering device: ID = 'sit0'
  447. <6>NET: Registered protocol family 17
  448. <6>NET: Registered protocol family 15
  449. <6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  450. <6>All bugs added by David S. Miller <davem@redhat.com>
  451. <7>driver_probe_done: probe_count = 0
  452. <5>RAMDISK: squashfs filesystem found at block 0
  453. <5>RAMDISK: Loading 9920KiB [1 disk] into ram disk... done.
  454. <4>VFS: Mounted root (squashfs filesystem) readonly.
  455. <6>Freeing init memory: 116K
  456. <5>JFFS2 notice: (246) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  457. <7>KN:init_aess_mem_module
  458. <4>mknod /dev/aess_eventhandlerdrv c 254 0
  459. <4>mknod /dev/vkcs c 253 0
  460. <4>aess_kcsdrv: no version for "aess_generate_driver_event" found: kernel tainted.
  461. <4>mknod /dev/aess_kcsdrv c 252 0
  462. <4>mknod /dev/aess_memdrv c 251 0
  463. <4>mknod /dev/aess_biospostdrv c 250 0
  464. <4>mknod /dev/aess_gpiodrv c 249 0
  465. <4>mknod /dev/aess_dynairqdrv c 248 0
  466. <4>mknod /dev/aess_i2cdrv c 247 0
  467. <4>Init_aess_pecisensor_module Sucess!
  468. <4>mknod /dev/aess_pecisensordrv c 246 0
  469. <4>mknod /dev/aess_cryptodrv c 245 0
  470. <4>mknod /dev/aess_fansensordrv c 244 0
  471. <4>mknod /dev/aess_pwmdrv c 243 0
  472. <6>Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
  473. <6>bonding: MII link monitoring set to 200 ms
  474. <7>DEV: registering device: ID = 'bond0'
  475. <7>DEV: registering device: ID = 'vir0'
  476. <7>DEV: registering device: ID = 'vir1'
  477. <1>ncsi_notifier: eth0 device registered
  478. <1>ncsi_notifier new open: lo opened !
  479. <6>ADDRCONF(NETDEV_UP): bond0: link is not ready
  480. <1>ncsi_notifier: bond0 opened !
  481. <1>ncsi_notifier: eth0 device opened
  482. <1>ncsi_notifier: eth0 device downed
  483. <6>ADDRCONF(NETDEV_UP): eth0: link is not ready
  484. <1>ncsi_notifier: eth0 device opened
  485. <7>Registering platform device 'g_ast2050_udc.0'. Parent at platform
  486. <7>DEV: registering device: ID = 'g_ast2050_udc.0'
  487. <7>bus platform: add device g_ast2050_udc.0
  488. <7>bus platform: add driver g_ast2050_udc
  489. <7>platform: Matched Device g_ast2050_udc.0 with Driver g_ast2050_udc
  490. <7>platform: Probing driver g_ast2050_udc with device g_ast2050_udc.0
  491. <7>bound device 'g_ast2050_udc.0' to driver 'g_ast2050_udc'
  492. <7>platform: Bound Device g_ast2050_udc.0 to Driver g_ast2050_udc
  493. <1>composite_init() Desc: USB Composite Device
  494. <1>composite_init() Name: g_composite
  495. <1>composite_init() Version: 20090730
  496. <7>DEV: registering device: ID = 'gadget'
  497. <4>usb_udc: g_ast2050_udc: registered gadget driver 'g_composite'
  498. <1>hid_init: Desc: Keyboard/Mouse Function
  499. <1>hid_init: Name: g_kbdmouse
  500. <1>hid_init: Version: 20090618
  501. <7>usb_composite_register()
  502. <1>hid_bind: Using Major Number 242
  503. <1>hid_bind: using g_ast2050_udc, Keyboard ep1in-int Mouse ep2in-int
  504. <1>hid_bind: Mouse REL ep3in-int
  505. <1>usb_composite_register(): bind to driver 'g_kbdmouse' SUCCESSFUL
  506. <6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  507. <1>msd_init: Desc: Mass Storage Function
  508. <1>msd_init: Name: g_mass_storage
  509. <1>msd_init: Version: 20091022
  510. <7>usb_composite_register()
  511. <1>msd_bind: Using Major Number 241
  512. <1>usb_composite_register(): bind to driver 'g_mass_storage' SUCCESSFUL
  513. <1>handle_exception: Handling MSD_STATE_DISCONNECT for interface[0]
  514. <1>handle_exception: Handling MSD_STATE_DISCONNECT for interface[1]
  515. <1>g_kbdmouse: high speed config #1 for Keyboard/Mouse
  516. <1>standard_setup_req(): MSD_STATE_CONFIG_CHANGE config=1
  517. <1>g_mass_storage: high speed config #1 for interface[0]
  518. <1>g_mass_storage: high speed config #1 for interface[1]
  519. <1>g_composite g_ast2050_udc: high speed config #1
  520. <4>ioaccess_ioctl Max Res = 1280 X 1024 Ref Mem (5242880) @ 46000000 Cap Mem (6291456) @ 45800000
  521. <4>ioaccess_ioctl Data_Linear_address = 45880000[524288] mapped to C7100000
  522. <4>ioaccess_ioctl VGA_Linear_address = 07800000 mapped to C8000000
  523. <4>drv-SetupDirectMode[2827] Disabled direct mode VIDEOENGINE_VIDEO_CONTROL=001E0000
  524. <4>process `nsupdate' is using obsolete setsockopt SO_BSDCOMPAT
  525. <7>DEV: registering device: ID = 'vcs1'
  526. <7>DEV: registering device: ID = 'vcsa1'
  527. <7>DEV: Unregistering device. ID = 'vcs1'
  528. <7>device_create_release called for vcs1
  529. <7>DEV: Unregistering device. ID = 'vcsa1'
  530. <7>device_create_release called for vcsa1
  531. <7>DEV: registering device: ID = 'vcs1'
  532. <7>DEV: registering device: ID = 'vcsa1'
  533. <7>DEV: Unregistering device. ID = 'vcs1'
  534. <7>device_create_release called for vcs1
  535. <7>DEV: Unregistering device. ID = 'vcsa1'
  536. <7>device_create_release called for vcsa1
  537. <7>eth0: no IPv6 routers present
  538. [AST2050 ~]$ lsmod
  539. Module Size Used by Tainted: GF
  540. aess_video 173968 0
  541. g_mass_storage 33840 2
  542. g_kbdmouse 17356 4
  543. g_composite 16916 2 g_mass_storage,g_kbdmouse
  544. g_ast2050_udc 20912 1 g_composite
  545. ncsi_protocol 11212 0
  546. bonding 89484 0
  547. aess_pwmdrv 13996 0
  548. aess_fansensordrv 16972 0
  549. aess_cryptodrv 28396 0
  550. aess_pecisensordrv 20584 0
  551. aess_i2cdrv 50328 2
  552. aess_dynairqdrv 22524 0
  553. aess_gpiodrv 24720 1 aess_dynairqdrv
  554. aess_biospostdrv 19756 0
  555. aess_memdrv 19744 0
  556. aess_kcsdrv 37988 0
  557. vkcs 5588 0
  558. aess_eventhandlerdrv 13708 3 aess_i2cdrv,aess_dynairqdrv,aess_kcsdrv
  559. [AST2050 ~]$ cat /proc/cpuinfo
  560. Processor : ARM926EJ-S rev 5 (v5l)
  561. BogoMIPS : 98.71
  562. Features : swp half thumb fastmult edsp java
  563. CPU implementer : 0x41
  564. CPU architecture: 5TEJ
  565. CPU variant : 0x0
  566. CPU part : 0x926
  567. CPU revision : 5
  568. Cache type : write-back
  569. Cache clean : cp15 c7 ops
  570. Cache lockdown : format C
  571. Cache format : Harvard
  572. I size : 16384
  573. I assoc : 4
  574. I line length : 32
  575. I sets : 128
  576. D size : 16384
  577. D assoc : 4
  578. D line length : 32
  579. D sets : 128
  580.  
  581. Hardware : ASPEED-AST2050
  582. Revision : 0000
  583. Serial : 0000000000000000
  584. [AST2050 ~]$ cat /proc/version
  585. Linux version 2.6.23.1-ASPEED-v.0.11 (root@tw5560dt.nwing.foxconn.com) (gcc version 3.4.5) #26 PREEMPT Thu Aug 26 17:58:31 CST 2010
  586. [AST2050 ~]$ uname -a
  587. Linux microserver-ipmi 2.6.23.1-ASPEED-v.0.11 #26 PREEMPT Thu Aug 26 17:58:31 CST 2010 armv5tejl unknown
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!