API tools faq
paste
Advertisement
noggin

dmesg from STV502 running Linux

noggin
Jan 25th, 2013
274
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.96 KB | None | 0 0
raw download clone embed print report
  1. / # dmesg
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.34 (stephen@stephen-i7-Ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 Thu Jan 24 22:54:33 GMT 2013
  4. [ 0.000000] CPU: ARMv7 Processor [412fc094] revision 4 (ARMv7), cr=10c53c7f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: AMLOGIC MESON3 8726M SKT SH
  7. [ 0.000000] Ignoring unrecognised tag 0x00000000
  8. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [ 0.000000] On node 0 totalpages: 216576
  10. [ 0.000000] free_area_init_node: node 0, pgdat c09b1d78, node_mem_map c0a3f000
  11. [ 0.000000] Normal zone: 1280 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 116992 pages, LIFO batch:31
  14. [ 0.000000] HighMem zone: 768 pages used for memmap
  15. [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  16. [ 0.000000] BUG: mapping for 0x84000000 at 0xc4000000 overlaps vmalloc space
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 214528
  18. [ 0.000000] Kernel command line: rw noinitrd root=/dev/nfs nfsroot=192.168.1.16:/home/stephen/SteveDev/target,nfsvers=3 init=/sbin/init ip=192.168.1.17:192.168.1.16:192.168.1.254:255.255.255.0:target:eth0:off console=ttyS0,115200 a9_clk=600M clk81=187500000 nohltmem=1024M mac=00:01:02:65:04:75 logo=osd1,0x84100000,full,480i,full androidboot.resolution=720p resolution_size=1280,720
  19. [ 0.000000] (CTS_DDR_CLK) = 528MHz
  20. [ 0.000000] (CTS_MALI_CLK) = 264MHz
  21. [ 0.000000] (CTS_A9_CLK) = 600MHz
  22. [ 0.000000] CLK81(from MSR_CLK_REG) = 188000000MHz, a9_clk(from args) = 187500000
  23. [ 0.000000] set CLK81 to 177MHz
  24. [ 0.000000] ******** uboot setup mac-addr: 0:1:2:65:4:75
  25. [ 0.000000] osd1:1
  26. [ 0.000000] full:2
  27. [ 0.000000] 480i:0
  28. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  31. [ 0.000000] Memory: 64MB 398MB 384MB = 846MB total
  32. [ 0.000000] Memory: 848640k/848640k available, 17664k reserved, 393216K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  37. [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  38. [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  39. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  40. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  41. [ 0.000000] .init : 0xc0008000 - 0xc0038000 ( 192 kB)
  42. [ 0.000000] .text : 0xc0038000 - 0xc0948024 (9281 kB)
  43. [ 0.000000] .data : 0xc094a000 - 0xc09b2680 ( 418 kB)
  44. [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  45. [ 0.000000] Hierarchical RCU implementation.
  46. [ 0.000000] NR_IRQS:128
  47. [ 0.000000] Console: colour dummy device 80x30
  48. [ 0.000000] console [ttyS0] enabled
  49. [ 0.236443] Calibrating delay loop... 933.88 BogoMIPS (lpj=4669440)
  50. [ 0.480166] Mount-cache hash table entries: 512
  51. [ 0.482162] Initializing cgroup subsys cpuacct
  52. [ 0.486086] Initializing cgroup subsys freezer
  53. [ 0.490586] CPU: Testing write buffer coherency: ok
  54. [ 0.496272] devtmpfs: initialized
  55. [ 0.501093] NET: Registered protocol family 16
  56. [ 0.503792] L2X0 cache controller enabled
  57. [ 0.507041] power hold set high!
  58. [ 0.510301] set_vccx2 power up
  59. [ 0.513281] select eth clk-7,source=50000000,out=50000000
  60. [ 0.618739] SPDIF output.
  61. [ 0.618757] CONFIG_AM_AVL6211 set pinmux
  62. [ 0.621154] ***m1_init_machine: usb set mode.
  63. [ 0.624039] USB PHY clock souce: XTAL input divided by 2
  64. [ 0.629327] register lm device 0
  65. [ 0.632595] register lm device 1
  66. [ 0.635806] chip version=e34c3110
  67. [ 0.639045] major number 0 for disp
  68.  
  69. [ 0.642592] register tv module server ok
  70.  
  71. [ 0.646693] major number 0 for disp
  72.  
  73. [ 0.650211] register tv module server ok
  74.  
  75. [ 0.673867] bio: create slab <bio-0> at 0
  76. [ 0.674414] SCSI subsystem initialized
  77. [ 0.676202] libata version 3.00 loaded.
  78. [ 0.676341] usbcore: registered new interface driver usbfs
  79. [ 0.681636] usbcore: registered new interface driver hub
  80. [ 0.686896] usbcore: registered new device driver usb
  81. [ 0.692055] TV mode 480i selected.
  82. [ 0.692063] [0x1b7e] = 0xff
  83. [ 0.694584] [0x1b80] = 0x0
  84. [ 0.697268] [0x1b57] = 0x0
  85. [ 0.699953] [0x1059] = 0x4
  86. [ 0.702660] [0x1b54] = 0x12
  87. [ 0.705410] [0x1c0a] = 0x12
  88. [ 0.708181] [0x1b62] = 0x0
  89. [ 0.710874] [0x1b00] = 0x0
  90. [ 0.713551] [0x1b01] = 0x0
  91. [ 0.716236] [0x1b0a] = 0x5
  92. [ 0.718921] [0x1b0b] = 0x81
  93. [ 0.721700] [0x1b0e] = 0x3
  94. [ 0.724378] [0x1b0f] = 0x104
  95. [ 0.727236] [0x1b50] = 0x810b
  96. [ 0.730187] [0x1b68] = 0xff
  97. [ 0.732953] [0x1b00] = 0x8
  98. [ 0.735638] [0x1b01] = 0x26
  99. [ 0.738409] [0x1b07] = 0x20
  100. [ 0.741186] [0x1b08] = 0x7
  101. [ 0.743866] [0x1b56] = 0x345
  102. [ 0.746724] [0x1c19] = 0xf3
  103. [ 0.749496] [0x1c1a] = 0x693
  104. [ 0.752360] [0x1c1b] = 0x12
  105. [ 0.755126] [0x1c1c] = 0x102
  106. [ 0.757984] [0x1c1d] = 0x13
  107. [ 0.760761] [0x1c1e] = 0x103
  108. [ 0.763614] [0x1b60] = 0x0
  109. [ 0.766299] [0x1b48] = 0x0
  110. [ 0.768984] [0x1b6e] = 0x2
  111. [ 0.771674] [0x1c18] = 0x4e01
  112. [ 0.774614] [0x1b7e] = 0x0
  113. [ 0.777299] [0x1b64] = 0x0
  114. [ 0.779984] [0x1b65] = 0x0
  115. [ 0.782674] [0x1b66] = 0x0
  116. [ 0.785354] [0x1b78] = 0x0
  117. [ 0.788039] [0x1b79] = 0x0
  118. [ 0.790729] [0x1b7a] = 0x0
  119. [ 0.793409] [0x1b7b] = 0x0
  120. [ 0.796094] [0x1b7c] = 0x0
  121. [ 0.798779] [0x1b7d] = 0x0
  122. [ 0.801469] [0x1bfc] = 0x2000
  123. [ 0.804409] [0x1c0b] = 0x1540
  124. [ 0.807354] [0x1c0c] = 0x11
  125. [ 0.810130] [0x1b80] = 0x0
  126. [ 0.812810] [0x1b57] = 0x1
  127. [ 0.815495] [0x1bf6] = 0x30
  128. [ 0.818267] [0x1b03] = 0x2
  129. [ 0.820957] [0x1b05] = 0xff
  130. [ 0.823723] [0x1c5e] = 0x1
  131. [ 0.826408] [0x1c5f] = 0xf850
  132. [ 0.829354] mode is: 0
  133. [ 0.831699] VPU_VIU_VENC_MUX_CTRL: 0x5
  134. [ 0.835416] viu chan = 1
  135. [ 0.837928] VPU_VIU_VENC_MUX_CTRL: 0x5
  136. [ 0.868286] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
  137. [ 0.869615] Bluetooth: Core ver 2.15
  138. [ 0.873004] NET: Registered protocol family 31
  139. [ 0.877225] Bluetooth: HCI device and connection manager initialized
  140. [ 0.883571] Bluetooth: HCI socket layer initialized
  141. [ 0.888588] cfg80211: Calling CRDA to update world regulatory domain
  142. [ 0.894877] Switching to clocksource Timer-E
  143. [ 0.899663] NET: Registered protocol family 2
  144. [ 0.903503] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  145. [ 0.910832] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  146. [ 0.918538] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  147. [ 0.924629] TCP: Hash tables configured (established 65536 bind 65536)
  148. [ 0.930592] TCP reno registered
  149. [ 0.933704] UDP hash table entries: 256 (order: 0, 4096 bytes)
  150. [ 0.939522] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  151. [ 0.945863] NET: Registered protocol family 1
  152. [ 0.950335] RPC: Registered udp transport module.
  153. [ 0.954744] RPC: Registered tcp transport module.
  154. [ 0.959450] RPC: Registered tcp NFSv4.1 backchannel transport module.
  155. [ 0.980073] highmem bounce pool size: 64 pages
  156. [ 0.985038] VFS: Disk quotas dquot_6.5.2
  157. [ 0.985263] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. [ 0.991544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  159. [ 0.997392] Slow work thread pool: Starting up
  160. [ 1.000307] Slow work thread pool: Ready
  161. [ 1.004020] NTFS driver 2.1.29 [Flags: R/W].
  162. [ 1.008638] yaffs built Jan 24 2013 22:52:50 Installing.
  163. [ 1.008679] fuse init (API version 7.13)
  164. [ 1.012769] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  165. [ 1.021537] msgmni has been set to 889
  166. [ 1.026757] alg: No test for stdrng (krng)
  167. [ 1.028156] io scheduler noop registered (default)
  168. [ 1.032905] io scheduler deadline registered
  169. [ 1.037409] io scheduler cfq registered
  170. [ 1.049783] brd: module loaded
  171. [ 1.051765] loop: module loaded
  172. [ 1.053032] usbcore: registered new interface driver cdc_acm
  173. [ 1.056038] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  174. [ 1.064593] Initializing USB Mass Storage driver...
  175. [ 1.069495] usbcore: registered new interface driver usb-storage
  176. [ 1.075352] USB Mass Storage support registered.
  177. [ 1.080099] usbcore: registered new interface driver usbserial
  178. [ 1.085778] USB Serial support registered for generic
  179. [ 1.090840] usbcore: registered new interface driver usbserial_generic
  180. [ 1.097266] usbserial: USB Serial Driver core
  181. [ 1.101645] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
  182. [ 1.109881] usbcore: registered new interface driver belkin
  183. [ 1.115368] belkin_sa: v1.2:USB Belkin Serial converter driver
  184. [ 1.121214] USB Serial support registered for cp210x
  185. [ 1.126165] usbcore: registered new interface driver cp210x
  186. [ 1.131669] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
  187. [ 1.138456] USB Serial support registered for FTDI USB Serial Device
  188. [ 1.144800] usbcore: registered new interface driver ftdi_sio
  189. [ 1.150460] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
  190. [ 1.156281] USB Serial support registered for GSM modem (1-port)
  191. [ 1.162283] usbcore: registered new interface driver option
  192. [ 1.167769] option: v0.7.2:USB Driver for GSM modems
  193. [ 1.172878] mice: PS/2 mouse device common for all mice
  194. [ 1.178261] i2c /dev entries driver
  195. [ 1.181527] Linux video capture interface: v2.00
  196. [ 1.185979] au0828 driver loaded
  197. [ 1.189257] usbcore: registered new interface driver au0828
  198. [ 1.194707] uvc_init amlogic
  199. [ 1.197625] usbcore: registered new interface driver uvcvideo
  200. [ 1.203303] USB Video Class driver (v1.1.0)
  201. [ 1.208391] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  202. [ 1.217410] usbcore: registered new interface driver hiddev
  203. [ 1.221495] usbcore: registered new interface driver usbhid
  204. [ 1.226926] usbhid: USB HID core driver
  205. [ 1.230795] start init vout module
  206.  
  207. [ 1.234336] create vout attribute ok
  208.  
  209. [ 1.238133] ge2d_init
  210. [ 1.240380] ge2d_dev major:253
  211.  
  212. [ 1.243665] ge2d start monitor
  213.  
  214. [ 1.246675] osd_init
  215. [ 1.248794] [osd0] 0x84100000-0x850fffff
  216. [ 1.252690] ge2d workqueue monitor start
  217.  
  218. [ 1.256950] Frame buffer memory assigned at phy:0x84100000, vir:0xe9000000, size=16384K
  219. [ 1.264630] ---------------clear framebuffer0 memory size=1000000.
  220.  
  221. [ 1.282637] [osd1] 0x85100000-0x860fffff
  222. [ 1.282952] Frame buffer memory assigned at phy:0x85100000, vir:0xeb000000, size=16384K
  223. [ 1.289015] init fbdev bpp is :24
  224.  
  225. [ 1.292592] osd probe ok
  226.  
  227. [ 1.295180] vout2_init_module enter
  228. [ 1.298618] start init vout2 module
  229.  
  230. [ 1.302317] create vout2 attribute ok
  231.  
  232. [ 1.306882] UART_ttyS0:(irq = 90, address = 0xf81004c0)
  233. [ 1.311383] UART_ttyS1:(irq = 26, address = 0xf11084c0)
  234. [ 1.316527] UART_ttyS2:(irq = 75, address = 0xf11084dc)
  235. [ 1.321743] UART_ttyS3:(irq = 93, address = 0xf1108700)
  236. [ 1.326913] Port 0 = IRQ 90
  237. [ 1.329696] Port 1 = IRQ 26
  238. [ 1.332456] Port 2 = IRQ 75
  239. [ 1.335227] Port 3 = IRQ 93
  240. [ 1.338002] Amlogic nand flash AVOS driver for M3, Version 1.1 (c) 2010 Amlogic Inc.
  241. [ 1.345850] bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
  242. [ 1.353580] No NAND device found.
  243. [ 1.356754] NAND device id: ad d7 94 da 74 c3
  244. [ 1.360969] aml_chip->hynix_new_nand_type =: 2
  245. [ 1.365461] NAND device: Manufacturer ID: 0xad, Chip ID: 0xad (Hynix B revision 26nm NAND 4GiB H27UBG8T2B)
  246. [ 1.375202] #####aml_nand_init, with RB pins and chip->chip_delay:20
  247. [ 1.381484] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
  248. [ 1.388586] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE
  249. [ 1.398984] Enter aml_nand_get_reg_value_hynix
  250. [ 1.403315] aml_nand_get_reg_value_hynix, REG(0xa0): value:0x25, for chip[0]
  251. [ 1.410425] aml_nand_get_reg_value_hynix, REG(0xa1): value:0x38, for chip[0]
  252. [ 1.417516] aml_nand_get_reg_value_hynix, REG(0xb0): value:0x20, for chip[0]
  253. [ 1.424627] aml_nand_get_reg_value_hynix, REG(0xb1): value:0x34, for chip[0]
  254. [ 1.431729] aml_nand_get_reg_value_hynix, REG(0xc9): value:0x47, for chip[0]
  255. [ 1.438825] Creating 1 MTD partitions on "B revision 26nm NAND 4GiB H27UBG8T2B":
  256. [ 1.446195] 0x000000000000-0x000000800000 : "bootloader"
  257. [ 1.452155] bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
  258. [ 1.459354] No NAND device found.
  259. [ 1.462509] NAND device id: ad d7 94 da 74 c3
  260. [ 1.466709] aml_chip->hynix_new_nand_type =: 2
  261. [ 1.471233] NAND device: Manufacturer ID: 0xad, Chip ID: 0xad (Hynix B revision 26nm NAND 4GiB H27UBG8T2B)
  262. [ 2.042769] 1 NAND chips detected
  263. [ 2.042808] #####aml_nand_init, with RB pins and chip->chip_delay:20
  264. [ 2.046930] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
  265. [ 2.054060] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE
  266. [ 2.064359] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE
  267. [ 2.074669] oob layout use nand base oob layout oobsize = 16,oobmul =1,mtd->oobsize =640,aml_chip->oob_size =640
  268. [ 2.084953] Enter aml_nand_get_reg_value_hynix
  269. [ 2.089317] aml_nand_get_reg_value_hynix, REG(0xa0): value:0x25, for chip[0]
  270. [ 2.096400] aml_nand_get_reg_value_hynix, REG(0xa1): value:0x38, for chip[0]
  271. [ 2.103513] aml_nand_get_reg_value_hynix, REG(0xb0): value:0x20, for chip[0]
  272. [ 2.110613] aml_nand_get_reg_value_hynix, REG(0xb1): value:0x34, for chip[0]
  273. [ 2.117706] aml_nand_get_reg_value_hynix, REG(0xc9): value:0x47, for chip[0]
  274. [ 2.128530] ######aml_nand_get_read_default_value_hynix 779 read default read retry reg value failed and need read from chip write back to nand using SLC
  275. [ 2.138507] Enter aml_nand_get_reg_value_hynix
  276. [ 2.142923] aml_nand_get_reg_value_hynix, REG(0xa7): value:0x21, for chip[0]
  277. [ 2.150023] aml_nand_get_reg_value_hynix, REG(0xad): value:0x21, for chip[0]
  278. [ 2.157116] aml_nand_get_reg_value_hynix, REG(0xae): value:0x72, for chip[0]
  279. [ 2.164226] aml_nand_get_reg_value_hynix, REG(0xaf): value:0xbf, for chip[0]
  280. [ 2.213334] aml nand env valid addr: ffffffffffe00000
  281. [ 2.213358] CONFIG_ENV_SIZE=0x2000; ENV_SIZE=0x1ffc; bbt=0x1330; default_environment_size=0xccc
  282. [ 2.213374] nand env: nand_env_probe.
  283. [ 2.216876] set nand parts for chip 4096MB
  284. [ 2.240671] Creating 8 MTD partitions on "B revision 26nm NAND 4GiB H27UBG8T2B":
  285. [ 2.242507] 0x000001400000-0x000001800000 : "ubootenv"
  286. [ 2.249335] 0x000001800000-0x000002800000 : "aml_logo"
  287. [ 2.258119] 0x000002800000-0x000003800000 : "recovery"
  288. [ 2.263516] 0x000003800000-0x000004c00000 : "boot"
  289. [ 2.270385] 0x000004c00000-0x000024c00000 : "system"
  290. [ 2.432261] 0x000024c00000-0x000030c00000 : "cache"
  291. [ 2.491157] 0x000030c00000-0x000050c00000 : "userdata"
  292. [ 2.652225] 0x000050c00000-0x000100000000 : "NFTL_Part"
  293. [ 4.761191] nftl initilize completely dev size: 0xa1e00000 5
  294. [ 4.761871] avnftl8: unknown partition table
  295. [ 4.766656] nftl release flush cache data: 0
  296. [ 4.770149] ethernetinit(dbg[c09f8b34]=0)
  297. [ 4.774037] find phy phy_Identifier=7c0f1
  298. [ 4.777839] write mac add to:e7ec44c8: 00 01 02 65 04 75 |...e.u|
  299. [ 4.783922] eth0: mixed no checksumming and other settings.
  300. [ 4.790015] ethernet_pm_driver init
  301. [ 4.792937] ethernet_pm_driver probe!
  302. [ 4.796596] dwc_otg: version 2.60a 22-NOV-2006
  303. [ 4.801029] dwc_otg lm0: start=0xf9040000
  304. [ 4.801039] dwc_otg lm0: core work at High speed.
  305. [ 4.801046] dwc_otg lm0: DMA config: BURST_INCR16
  306. [ 5.218984] dwc_otg lm0: Working on port type = OTG
  307. [ 5.218997] dwc_otg lm0: Current port type: SLAVE
  308. [ 5.219010] DWC_otg: Using DMA mode
  309. [ 5.219027] dwc_otg lm0: DWC OTG Controller
  310. [ 5.221163] dwc_otg lm0: new USB bus registered, assigned bus number 1
  311. [ 5.227618] dwc_otg lm0: irq 30, io mem 0x00000000
  312. [ 5.232853] hub 1-0:1.0: USB hub found
  313. [ 5.236097] hub 1-0:1.0: 1 port detected
  314. [ 5.240287] DWC_otg: Shared Tx FIFO mode
  315. [ 5.243970] dwc_otg lm1: start=0xf90c0000
  316. [ 5.243980] dwc_otg lm1: core work at High speed.
  317. [ 5.243987] dwc_otg lm1: DMA config: BURST_INCR16
  318. [ 5.658982] dwc_otg lm1: Working on port type = HOST
  319. [ 5.659000] DWC_otg: Using DMA mode
  320. [ 5.659016] dwc_otg lm1: DWC OTG Controller
  321. [ 5.661125] dwc_otg lm1: new USB bus registered, assigned bus number 2
  322. [ 5.667605] dwc_otg lm1: irq 31, io mem 0x00000000
  323. [ 5.672395] DWC_otg: Init: Port Power? op_state=1
  324. [ 5.677024] DWC_otg: Init: Power Port (0)
  325. [ 5.681024] set usb b port power on (board gpio 5)!
  326. [ 5.686362] hub 2-0:1.0: USB hub found
  327. [ 5.689636] hub 2-0:1.0: 1 port detected
  328. [ 5.693784] Amlogic A/V streaming port init
  329. [ 5.698679] regist mpeg12 codec profile
  330. [ 5.701540] regist mpeg4 codec profile
  331. [ 5.705173] amvdec_vc1 module init
  332. [ 5.708601] regist vc1 codec profile
  333. [ 5.712131] amvdec_avs module init
  334. [ 5.715547] amvdec_h264 module init
  335. [ 5.719010] regist h264 codec profile
  336. [ 5.722582] amvdec_h264mvc module init
  337. [ 5.726378] regist mjpeg codec profile
  338. [ 5.730046] amvdec_real module init
  339. [ 5.733535] regist real codec profile
  340. [ 5.738363] pdev_id = -1, plat_udelay = 2, plat_timeout = 100
  341. [ 5.743144] aml gpio i2c bus [0] initialized
  342.  
  343. [ 5.747221] Keypad Driver
  344. [ 5.750231] input: aml_keypad as /devices/platform/m1-kp.0/input/input0
  345. [ 5.756624] remote config major:249
  346.  
  347. [ 5.760099] physical address:0xa741e000
  348. [ 5.763769] Key input Driver init.
  349. [ 5.767149] Key 116 registed.
  350. [ 5.770079] <FIQ>:Deinterlace: Init 100us T
  351. [ 5.770085] 0
  352. [ 5.775905] input: key_input as /devices/platform/m1-keyinput.0/input/input1
  353. [ 5.782935] Key input register input device completed.
  354.  
  355. [ 5.787985] key_input major:248
  356.  
  357. [ 5.791710] spi_nor apollospi:0: unrecognized JEDEC id 1c5114
  358. [ 5.797510] Memory Card media Major: 253
  359. [ 5.800956] card max_req_size is 128K
  360. [ 5.804909] card creat process sucessful
  361. [ 5.808512] [dsp]DSP start addr 0xc4000000
  362. [ 5.812638] [dsp]register dsp to char divece(232)
  363. [ 5.821540] DSP pcmenc stream buffer to [0xa6801000-0xa6a01000]
  364. [ 5.823055] amlogic audio dsp pcmenc device init!
  365. [ 5.827977] amlogic audio spdif interface device init!
  366. [ 5.834628] DSP log stream buffer to [0xa6400000-0xa647ffe0]
  367. [ 5.838471] amlogic audio dsp log device init!
  368. [ 5.843317] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0
  369. [ 5.849637] gpio dev major number:241
  370.  
  371. [ 5.852978] create gpio device success
  372. [ 5.856445] efuse===========================================
  373. [ 5.862300] efuse: device efuse created
  374. [ 5.865880] efuse--------------------------------------------
  375. [ 5.871965] HDMI DEBUG: amhdmitx_init [1446]
  376. [ 5.875836] HDMI DEBUG: amhdmitx_probe [1285]
  377. [ 5.880508] hdmin get hdmi platform data
  378. [ 5.884032] HDMI DEBUG: amhdmitx_probe [1357]
  379. [ 5.888488] aml_dvb_init
  380. [ 5.891098] Set HDMI:Chip C
  381. [ 5.893801] hdmin get brd phy data
  382. [ 5.897108] hdmi phy setting
  383. [ 5.900089] hdmin get brd phy data
  384. [ 5.903344] hdmi phy setting
  385. [ 5.906292] CEC not init
  386. [ 5.910661] DVB: registering new adapter (amlogic-dvb)
  387. [ 5.915868] DVB: async fifo 0 buf size 524288, flush size 262144
  388. [ 5.919932] DVB: async fifo 1 buf size 524288, flush size 262144
  389. [ 5.926015] init avl6211 frontend 0
  390. [ 5.929330] HDMI DEBUG: hdmi_task_handle [1016]
  391. [ 5.933772] set gpio1.20 input
  392. [ 5.936785] DVB: registering adapter 0 frontend -1520246750 (AMLOGIC DVB-S2)...
  393. [ 5.944384] rtw driver version=v3.4.2_3727.20120404
  394. [ 5.949036] Build at: Jan 24 2013 22:52:19
  395. [ 5.953198] usbcore: registered new interface driver rtl8192cu
  396. [ 5.959068] aml_wdt_init, register platform driver...
  397. [ 5.964156] aml_wdt_probe, driver probe ok
  398. [ 5.967998] Bluetooth: Virtual HCI driver ver 1.3
  399. [ 5.972850] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
  400. [ 5.978794] usbcore: registered new interface driver bcm203x
  401. [ 5.984375] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
  402. [ 5.990333] usbcore: registered new interface driver bpa10x
  403. [ 5.995771] Bluetooth: BlueFRITZ! USB driver ver 1.2
  404. [ 6.000813] usbcore: registered new interface driver bfusb
  405. [ 6.006162] Bluetooth: Generic Bluetooth USB driver ver 0.6
  406. [ 6.011847] usbcore: registered new interface driver btusb
  407. [ 6.017164] Bluetooth: Atheros AR30xx firmware driver ver 1.0
  408. [ 6.023058] usbcore: registered new interface driver ath3k
  409. [ 6.028746] usbcore: registered new interface driver snd-usb-audio
  410. [ 6.034706] No device for DAI aml-dai0
  411. [ 6.038241] ***Entered sound/soc/aml/aml_m3.c:aml_m3_audio_probe
  412. [ 6.044607] ***Entered sound/soc/aml/aml_m3_codec.c:aml_m3_register
  413. [ 6.079012] usb 2-1: new high speed USB device using dwc_otg and address 2
  414. [ 6.291162] hub 2-1:1.0: USB hub found
  415. [ 6.291581] hub 2-1:1.0: 4 ports detected
  416. [ 6.689208] aml-pcm 0:preallocate_dma_buffer: area=ffc2a000, addr=a6520000, size=65536
  417. [ 6.692066] iec958 -3952640: preallocate dma buffer start=00040000, size=c0a26d78
  418. [ 6.699338] aml-pcm 1:preallocate_dma_buffer: area=ffc7b000, addr=a6680000, size=65536
  419. [ 6.706900] asoc: AML-M3 <-> aml-dai0 mapping ok
  420. [ 6.711623] ***Entered sound/soc/aml/aml_m3.c:aml_m3_codec_init:
  421. [ 6.717502] dapm: AML_M3_CODEC: configuring unknown pin LINPUT1
  422. [ 6.723389] dapm: AML_M3_CODEC: configuring unknown pin RINPUT1
  423. [ 6.729260] dapm: AML_M3_CODEC: configuring unknown pin HP MIC
  424. [ 6.735046] dapm: AML_M3_CODEC: configuring unknown pin FM IN
  425. [ 6.741077] input: AML-M3 hp_switch as /devices/platform/soc-audio/sound/card0/input2
  426. [ 6.749483] ALSA device list:
  427. [ 6.751506] #0: AML-M3 (AML_M3_CODEC)
  428. [ 6.755587] Netfilter messages via NETLINK v0.30.
  429. [ 6.760121] nf_conntrack version 0.5.0 (13260 buckets, 53040 max)
  430. [ 6.766625] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  431. [ 6.773468] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  432. [ 6.781316] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  433. [ 6.787896] ctnetlink v0.93: registering with nfnetlink.
  434. [ 6.792839] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  435. [ 6.799689] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  436. [ 6.805622] xt_time: kernel timezone is -0000
  437. [ 6.811164] ip_tables: (C) 2000-2006 Netfilter Core Team
  438. [ 6.815183] arp_tables: (C) 2002 David S. Miller
  439. [ 6.819807] TCP cubic registered
  440. [ 6.823627] NET: Registered protocol family 10
  441. [ 6.829693] IPv6 over IPv4 tunneling driver
  442. [ 6.832870] NET: Registered protocol family 17
  443. [ 6.835906] NET: Registered protocol family 15
  444. [ 6.840609] Bridge firewalling registered
  445. [ 6.844312] Bluetooth: L2CAP ver 2.14
  446. [ 6.847903] Bluetooth: L2CAP socket layer initialized
  447. [ 6.853007] Bluetooth: SCO (Voice Link) ver 0.6
  448. [ 6.857432] Bluetooth: SCO socket layer initialized
  449. [ 6.862454] Bluetooth: RFCOMM TTY layer initialized
  450. [ 6.867139] Bluetooth: RFCOMM socket layer initialized
  451. [ 6.872278] Bluetooth: RFCOMM ver 1.11
  452. [ 6.875969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  453. [ 6.881263] Bluetooth: BNEP filters: protocol multicast
  454. [ 6.886448] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  455. [ 6.892516] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  456. [ 6.899132] All bugs added by David S. Miller <davem@redhat.com>
  457. [ 6.905147] lib80211: common routines for IEEE802.11 drivers
  458. [ 6.910773] lib80211_crypt: registered algorithm 'NULL'
  459. [ 6.910847] enter meson_pm_probe!
  460. [ 6.914005] meson_pm_probe done 0x0 200!
  461. [ 6.917939] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  462. [ 6.926079] registered taskstats version 1
  463. [ 6.930830] aml_rtc aml_rtc: setting system clock to 1970-01-01 00:01:35 UTC (95)
  464. [ 7.439630] netdev_open
  465. [ 7.439650] Ethernet reset
  466. [ 7.439665] NET MDA descpter start addr=e66f6000
  467. [ 7.444407] write mac add to:e7ec44c8: 00 01 02 65 04 75 |...e.u|
  468. [ 7.449932] Current DMA mode=0
  469. [ 7.452970] ether leave promisc module
  470. [ 7.456631] ether leave all muticast module
  471. [ 7.460807] set hash low=2,high=0
  472. [ 7.464161] set hash low=2,high=1
  473. [ 7.467769] ADDRCONF(NETDEV_UP): eth0: link is not ready
  474. [ 8.479138] IP-Config: Complete:
  475. [ 8.479161] device=eth0, addr=192.168.1.17, mask=255.255.255.0, gw=192.168.1.254,
  476. [ 8.484445] host=target, domain=, nis-domain=(none),
  477. [ 8.489844] bootserver=192.168.1.16, rootserver=192.168.1.16, rootpath=
  478. [ 8.497284] Looking up port of RPC 100003/3 on 192.168.1.16
  479. [ 9.459476] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  480. [ 9.459743] set hash low=2,high=800001
  481. [ 9.509647] Looking up port of RPC 100005/3 on 192.168.1.16
  482. [ 9.549322] VFS: Mounted root (nfs filesystem) on device 0:14.
  483. [ 9.550083] devtmpfs: mounted
  484. [ 9.552578] init_post.
  485. [ 9.554918] Freeing init memory: 192K
  486. [ 9.558529] run_init_process /sbin/init.
  487. [ 10.001175] yaffs: dev is 32505859 name is "mtdblock3" rw
  488. [ 10.001210] yaffs: passed flags ""
  489. [ 10.004409] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
  490. [ 10.004433] yaffs: NAND geometry problems: chunk size 8192, type is yaffs2, inbandTags 1
  491. [ 10.929912] yaffs: dev is 32505863 name is "mtdblock7" rw
  492. [ 10.929946] yaffs: passed flags ""
  493. [ 10.933145] yaffs: Attempting MTD mount of 31.7,"mtdblock7"
  494. [ 10.933224] yaffs2 check point success.
  495. [ 10.961719] yaffs: restored from checkpoint
  496. [ 10.963131] yaffs_read_super: isCheckpointed 1
  497. [ 10.977155] aml nand write failed at 107692
  498. [ 10.977828] **>> yaffs write required 2 attempts
  499. [ 11.107238] <30>udevd[108]: starting version 173
  500. [ 11.979412] page 39429 in gc has no object: 0 0 0
  501. [ 11.979736] page 39430 in gc has no object: 0 0 0
  502. [ 11.980052] page 39431 in gc has no object: 0 0 0
  503. [ 11.980363] page 39432 in gc has no object: 0 0 0
  504. [ 11.980678] page 39433 in gc has no object: 0 0 0
  505. [ 12.654897] nftl release flush cache data: 0
  506. [ 13.419577] set hash low=2,high=810001
  507. [ 13.636841] Mali<2>:
  508. [ 13.636860] Mali<2>: Inserting Mali v9 device driver.
  509. [ 13.638683] Mali<2>: Compiled: Jan 24 2013, time: 22:54:46.
  510. [ 13.644227] Mali<2>: Svn revision:
  511. [ 13.648360] Mali<2>: MMU memory system initializing
  512. [ 13.652938] Mali<2>: Rendercore: subsystem global mutex initialized
  513. [ 13.658780] Mali<2>: Core: subsystem_init: Mali-400 PP
  514. [ 13.663889] Mali<2>: Core: subsystem_init: Mali-400 GP
  515. [ 13.669019] Mali<2>: Mali L2 cache system initializing
  516. [ 13.726000] mali_meson_poweron: Interrupt received.
  517. [ 13.727061] Mali<2>: MMU registered
  518. [ 13.731331] Mali<2>: MMU registered
  519. [ 13.732354] Mali<2>: Mali OS memory allocator created with max allocation size of 0x8000000 bytes, cpu_usage_adjust 0x00000000
  520. [ 13.750987] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x84000000, size==0x06000000, cpu_adjust==0x00000000
  521. [ 13.758626] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache
  522. [ 13.767531] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) :
  523. [ 13.774367] Mali<1>: 5: Mali Memory
  524. [ 13.778536] Mali<2>: Attach mmu: 0xe62814e0 to core: Mali-400 PP in subsystem: Mali-400 PP
  525. [ 13.786094] Mali<2>: Attach mmu: 0xe6281780 to core: Mali-400 GP in subsystem: Mali-400 GP
  526. [ 13.794347] Mali<2>: Mali L2 cache system load complete
  527. [ 13.799895] Mali: Mali device driver loaded
  528. [ 13.803758] Mali<2>: malidrv_build_info
  529. [ 13.989327] page 39434 in gc has no object: 0 0 0
  530. [ 13.989646] page 39435 in gc has no object: 0 0 0
  531. [ 13.989962] page 39436 in gc has no object: 0 0 0
  532. [ 13.990274] page 39437 in gc has no object: 0 0 0
  533. [ 13.990589] page 39439 in gc has no object: 0 0 0
  534. [ 15.999370] page 39440 in gc has no object: 0 0 0
  535. [ 15.999719] page 39441 in gc has no object: 0 0 0
  536. [ 16.000059] page 39442 in gc has no object: 0 0 0
  537. [ 16.000390] page 39443 in gc has no object: 0 0 0
  538. [ 16.000726] page 39444 in gc has no object: 0 0 0
  539. [ 18.009368] page 39445 in gc has no object: 0 0 0
  540. [ 18.009716] page 39446 in gc has no object: 0 0 0
  541. [ 18.010054] page 39447 in gc has no object: 0 0 0
  542. [ 18.010386] page 39448 in gc has no object: 0 0 0
  543. [ 18.010722] page 39449 in gc has no object: 0 0 0
  544. [ 20.019371] page 39450 in gc has no object: 0 0 0
  545. [ 20.019719] page 39451 in gc has no object: 0 0 0
  546. [ 20.020058] page 39452 in gc has no object: 0 0 0
  547. [ 20.020390] page 39453 in gc has no object: 0 0 0
  548. [ 20.020726] page 39454 in gc has no object: 0 0 0
  549. [ 20.208987] eth0: no IPv6 routers present
  550. [ 21.019005] nftl creat stucture completely free blk: 7 erased blk: 1385
  551. [ 22.029362] page 39455 in gc has no object: 0 0 0
  552. [ 22.029708] page 39456 in gc has no object: 0 0 0
  553. [ 22.030041] page 39457 in gc has no object: 0 0 0
  554. [ 22.030377] page 39459 in gc has no object: 0 0 0
  555. [ 22.030713] page 39460 in gc has no object: 0 0 0
  556. [ 24.039362] page 39461 in gc has no object: 0 0 0
  557. [ 24.039711] page 39462 in gc has no object: 0 0 0
  558. [ 24.040052] page 39463 in gc has no object: 0 0 0
  559. [ 24.040385] page 39464 in gc has no object: 0 0 0
  560. [ 24.040722] page 39465 in gc has no object: 0 0 0
  561. [ 26.049372] page 39466 in gc has no object: 0 0 0
  562. [ 26.049721] page 39467 in gc has no object: 0 0 0
  563. [ 26.050060] page 39468 in gc has no object: 0 0 0
  564. [ 26.050392] page 39469 in gc has no object: 0 0 0
  565. [ 26.050728] page 39470 in gc has no object: 0 0 0
  566. [ 28.059372] page 39471 in gc has no object: 0 0 0
  567. [ 28.059721] page 39472 in gc has no object: 0 0 0
  568. [ 28.060060] page 39474 in gc has no object: 0 0 0
  569. [ 28.060392] page 39475 in gc has no object: 0 0 0
  570. [ 28.060729] page 39476 in gc has no object: 0 0 0
  571. [ 30.069391] page 39477 in gc has no object: 0 0 0
  572. [ 30.069741] page 39478 in gc has no object: 0 0 0
  573. [ 30.070080] page 39479 in gc has no object: 0 0 0
  574. [ 30.070412] page 39480 in gc has no object: 0 0 0
  575. [ 30.070749] page 39481 in gc has no object: 0 0 0
  576. [ 32.079376] page 39482 in gc has no object: 0 0 0
  577. [ 32.079723] page 39483 in gc has no object: 0 0 0
  578. [ 32.080067] page 39484 in gc has no object: 0 0 0
  579. [ 32.080398] page 39485 in gc has no object: 0 0 0
  580. [ 32.080734] page 39486 in gc has no object: 0 0 0
  581. [ 34.089380] page 39487 in gc has no object: 0 0 0
  582. [ 34.089727] page 39488 in gc has no object: 0 0 0
  583. [ 34.090069] page 39489 in gc has no object: 0 0 0
  584. [ 34.090401] page 39490 in gc has no object: 0 0 0
  585. [ 34.090738] page 39491 in gc has no object: 0 0 0
  586. [ 36.099377] page 39492 in gc has no object: 0 0 0
  587. [ 36.099724] page 39494 in gc has no object: 0 0 0
  588. [ 36.100068] page 39495 in gc has no object: 0 0 0
  589. [ 36.100400] page 39496 in gc has no object: 0 0 0
  590. [ 36.100737] page 39497 in gc has no object: 0 0 0
  591. [ 38.109370] page 39498 in gc has no object: 0 0 0
  592. [ 38.109717] page 39499 in gc has no object: 0 0 0
  593. [ 38.110058] page 39500 in gc has no object: 0 0 0
  594. [ 38.110390] page 39501 in gc has no object: 0 0 0
  595. [ 38.110726] page 39502 in gc has no object: 0 0 0
  596. [ 40.119374] page 39503 in gc has no object: 0 0 0
  597. [ 40.119723] page 39504 in gc has no object: 0 0 0
  598. [ 40.120068] page 39505 in gc has no object: 0 0 0
  599. [ 40.120399] page 39506 in gc has no object: 0 0 0
  600. [ 40.120735] page 39507 in gc has no object: 0 0 0
  601. [ 42.129374] page 39508 in gc has no object: 0 0 0
  602. [ 42.129723] page 39509 in gc has no object: 0 0 0
  603. [ 42.130069] page 39510 in gc has no object: 0 0 0
  604. [ 42.130401] page 39511 in gc has no object: 0 0 0
  605. [ 42.130737] page 39512 in gc has no object: 0 0 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!